gecko-dev/dom/media/MediaStreamListener.h

281 строка
12 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#ifndef MOZILLA_MEDIASTREAMLISTENER_h_
#define MOZILLA_MEDIASTREAMLISTENER_h_
#include "StreamTracks.h"
#include "MediaStreamGraph.h"
namespace mozilla {
class AudioSegment;
class MediaStream;
class MediaStreamGraph;
class MediaStreamVideoSink;
class VideoSegment;
/**
* This is a base class for media graph thread listener callbacks.
* Override methods to be notified of audio or video data or changes in stream
* state.
*
* This can be used by stream recorders or network connections that receive
* stream input. It could also be used for debugging.
*
* All notification methods are called from the media graph thread. Overriders
* of these methods are responsible for all synchronization. Beware!
* These methods are called without the media graph monitor held, so
* reentry into media graph methods is possible, although very much discouraged!
* You should do something non-blocking and non-reentrant (e.g. dispatch an
* event to some thread) and return.
* The listener is not allowed to add/remove any listeners from the stream.
*
* When a listener is first attached, we guarantee to send a NotifyBlockingChanged
* callback to notify of the initial blocking state. Also, if a listener is
* attached to a stream that has already finished, we'll call NotifyFinished.
*/
class MediaStreamListener {
protected:
// Protected destructor, to discourage deletion outside of Release():
virtual ~MediaStreamListener() {}
public:
NS_INLINE_DECL_THREADSAFE_REFCOUNTING(MediaStreamListener)
/**
* When a SourceMediaStream has pulling enabled, and the MediaStreamGraph
* control loop is ready to pull, this gets called. A NotifyPull implementation
* is allowed to call the SourceMediaStream methods that alter track
* data. It is not allowed to make other MediaStream API calls, including
* calls to add or remove MediaStreamListeners. It is not allowed to block
* for any length of time.
* aDesiredTime is the stream time we would like to get data up to. Data
* beyond this point will not be played until NotifyPull runs again, so there's
* not much point in providing it. Note that if the stream is blocked for
* some reason, then data before aDesiredTime may not be played immediately.
*/
virtual void NotifyPull(MediaStreamGraph* aGraph, StreamTime aDesiredTime) {}
enum Blocking {
BLOCKED,
UNBLOCKED
};
/**
* Notify that the blocking status of the stream changed. The initial state
* is assumed to be BLOCKED.
*/
virtual void NotifyBlockingChanged(MediaStreamGraph* aGraph, Blocking aBlocked) {}
/**
* Notify that the stream has data in each track
* for the stream's current time. Once this state becomes true, it will
* always be true since we block stream time from progressing to times where
* there isn't data in each track.
*/
virtual void NotifyHasCurrentData(MediaStreamGraph* aGraph) {}
/**
* Notify that the stream output is advancing. aCurrentTime is the graph's
* current time. MediaStream::GraphTimeToStreamTime can be used to get the
* stream time.
*/
virtual void NotifyOutput(MediaStreamGraph* aGraph, GraphTime aCurrentTime) {}
/**
* Notify that an event has occurred on the Stream
*/
virtual void NotifyEvent(MediaStreamGraph* aGraph, MediaStreamGraphEvent aEvent) {}
/**
* Notify that changes to one of the stream tracks have been queued.
* aTrackEvents can be any combination of TRACK_EVENT_CREATED and
* TRACK_EVENT_ENDED. aQueuedMedia is the data being added to the track
* at aTrackOffset (relative to the start of the stream).
* aInputStream and aInputTrackID will be set if the changes originated
* from an input stream's track. In practice they will only be used for
* ProcessedMediaStreams.
*/
virtual void NotifyQueuedTrackChanges(MediaStreamGraph* aGraph, TrackID aID,
StreamTime aTrackOffset,
TrackEventCommand aTrackEvents,
const MediaSegment& aQueuedMedia,
MediaStream* aInputStream = nullptr,
TrackID aInputTrackID = TRACK_INVALID) {}
/**
* Notify queued audio data. Only audio data need to be queued. The video data
* will be notified by MediaStreamVideoSink::SetCurrentFrame.
*/
virtual void NotifyQueuedAudioData(MediaStreamGraph* aGraph, TrackID aID,
StreamTime aTrackOffset,
const AudioSegment& aQueuedMedia,
MediaStream* aInputStream = nullptr,
TrackID aInputTrackID = TRACK_INVALID) {}
/**
* Notify that all new tracks this iteration have been created.
* This is to ensure that tracks added atomically to MediaStreamGraph
* are also notified of atomically to MediaStreamListeners.
*/
virtual void NotifyFinishedTrackCreation(MediaStreamGraph* aGraph) {}
};
/**
* This is a base class for media graph thread listener callbacks locked to
* specific tracks. Override methods to be notified of audio or video data or
* changes in track state.
*
* All notification methods are called from the media graph thread. Overriders
* of these methods are responsible for all synchronization. Beware!
* These methods are called without the media graph monitor held, so
* reentry into media graph methods is possible, although very much discouraged!
* You should do something non-blocking and non-reentrant (e.g. dispatch an
* event to some thread) and return.
* The listener is not allowed to add/remove any listeners from the parent
* stream.
*
* If a listener is attached to a track that has already ended, we guarantee
* to call NotifyEnded.
*/
class MediaStreamTrackListener
{
NS_INLINE_DECL_THREADSAFE_REFCOUNTING(MediaStreamTrackListener)
public:
virtual void NotifyQueuedChanges(MediaStreamGraph* aGraph,
StreamTime aTrackOffset,
const MediaSegment& aQueuedMedia) {}
virtual void NotifyPrincipalHandleChanged(MediaStreamGraph* aGraph,
const PrincipalHandle& aNewPrincipalHandle) {}
virtual void NotifyEnded() {}
virtual void NotifyRemoved() {}
protected:
virtual ~MediaStreamTrackListener() {}
};
/**
* This is a base class for media graph thread listener direct callbacks
* from within AppendToTrack(). Note that your regular listener will
* still get NotifyQueuedTrackChanges() callbacks from the MSG thread, so
* you must be careful to ignore them if AddDirectListener was successful.
*/
class DirectMediaStreamListener : public MediaStreamListener
{
public:
virtual ~DirectMediaStreamListener() {}
/*
* This will be called on any DirectMediaStreamListener added to a
* a SourceMediaStream when AppendToTrack() is called. The MediaSegment
* will be the RawSegment (unresampled) if available in AppendToTrack().
* Note that NotifyQueuedTrackChanges() calls will also still occur.
*/
virtual void NotifyRealtimeData(MediaStreamGraph* aGraph, TrackID aID,
StreamTime aTrackOffset,
uint32_t aTrackEvents,
const MediaSegment& aMedia) {}
};
/**
* This is a base class for media graph thread listener direct callbacks from
* within AppendToTrack(). It is bound to a certain track and can only be
* installed on audio tracks. Once added to a track on any stream in the graph,
* the graph will try to install it at that track's source of media data.
*
* This works for TrackUnionStreams, which will forward the listener to the
* track's input track if it exists, or wait for it to be created before
* forwarding if it doesn't.
* Once it reaches a SourceMediaStream, it can be successfully installed.
* Other types of streams will fail installation since they are not supported.
*
* Note that this listener and others for the same track will still get
* NotifyQueuedChanges() callbacks from the MSG tread, so you must be careful
* to ignore them if this listener was successfully installed.
*/
class DirectMediaStreamTrackListener : public MediaStreamTrackListener
{
friend class SourceMediaStream;
friend class TrackUnionStream;
public:
/*
* This will be called on any DirectMediaStreamTrackListener added to a
* SourceMediaStream when AppendToTrack() is called for the listener's bound
* track, using the thread of the AppendToTrack() caller. The MediaSegment
* will be the RawSegment (unresampled) if available in AppendToTrack().
* If the track is enabled at the source but has been disabled in one of the
* streams in between the source and where it was originally added, aMedia
* will be a disabled version of the one passed to AppendToTrack() as well.
* Note that NotifyQueuedTrackChanges() calls will also still occur.
*/
virtual void NotifyRealtimeTrackData(MediaStreamGraph* aGraph,
StreamTime aTrackOffset,
const MediaSegment& aMedia) {}
/**
* When a direct listener is processed for installation by the
* MediaStreamGraph it will be notified with whether the installation was
* successful or not. The results of this installation are the following:
* TRACK_NOT_FOUND_AT_SOURCE
* We found the source stream of media data for this track, but the track
* didn't exist. This should only happen if you try to install the listener
* directly to a SourceMediaStream that doesn't contain the given TrackID.
* STREAM_NOT_SUPPORTED
* While looking for the data source of this track, we found a MediaStream
* that is not a SourceMediaStream or a TrackUnionStream.
* ALREADY_EXIST
* This DirectMediaStreamTrackListener already exists in the
* SourceMediaStream.
* SUCCESS
* Installation was successful and this listener will start receiving
* NotifyRealtimeData on the next AppendToTrack().
*/
enum class InstallationResult {
TRACK_NOT_FOUND_AT_SOURCE,
TRACK_TYPE_NOT_SUPPORTED,
STREAM_NOT_SUPPORTED,
ALREADY_EXISTS,
SUCCESS
};
virtual void NotifyDirectListenerInstalled(InstallationResult aResult) {}
virtual void NotifyDirectListenerUninstalled() {}
virtual MediaStreamVideoSink* AsMediaStreamVideoSink() { return nullptr; }
protected:
virtual ~DirectMediaStreamTrackListener() {}
void MirrorAndDisableSegment(AudioSegment& aFrom, AudioSegment& aTo);
void MirrorAndDisableSegment(VideoSegment& aFrom,
VideoSegment& aTo,
DisabledTrackMode aMode);
void NotifyRealtimeTrackDataAndApplyTrackDisabling(MediaStreamGraph* aGraph,
StreamTime aTrackOffset,
MediaSegment& aMedia);
void IncreaseDisabled(DisabledTrackMode aMode);
void DecreaseDisabled(DisabledTrackMode aMode);
// Matches the number of disabled streams to which this listener is attached.
// The number of streams are those between the stream the listener was added
// and the SourceMediaStream that is the input of the data.
Atomic<int32_t> mDisabledFreezeCount;
Atomic<int32_t> mDisabledBlackCount;
nsAutoPtr<MediaSegment> mMedia;
};
} // namespace mozilla
#endif // MOZILLA_MEDIASTREAMLISTENER_h_