gecko-dev/webtools/bonsai/rebuildcvshistory.cgi

276 строки
8.4 KiB
Perl
Executable File

#!/usr/bonsaitools/bin/perl -w
#
# The contents of this file are subject to the Netscape Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/NPL/
#
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is the Bonsai CVS tool.
#
# The Initial Developer of the Original Code is Netscape Communications
# Corporation. Portions created by Netscape are
# Copyright (C) 1998 Netscape Communications Corporation. All
# Rights Reserved.
#
# Contributor(s):
use diagnostics;
use strict;
# Shut up misguided -w warnings about "used only once". "use vars" just
# doesn't work for me.
sub sillyness {
my $zz;
$zz = $::RepositoryID;
$zz = $::StartingDir;
}
use File::Basename;
require "CGI.pl";
sub ProcessOneFile {
my ($filename) = @_;
my $rlog = Param('rlogcommand') . " $filename |";
my $doingtags = 0;
my $filehead = dirname($filename);
my (%branchname, $filerealname, $filetail, $line, $trimmed);
my ($tag, $version, $branchid, $dirid, $fileid, $indesc, $desc);
my ($author, $revision, $datestr, $date, $pluscount, $minuscount);
my ($branch);
print "$filename\n";
die "Unable to run rlog command '$rlog': $!\n"
unless (open(RLOG_PROC, "$rlog"));
undef (%branchname);
($filerealname = $filename) =~ s/,v$//g;
$filehead =~ s!^$::Repository/*!!;
$filehead = '.'
unless ($filehead);
$filetail = basename($filerealname);
while (<RLOG_PROC>) {
chop;
$line = $_;
$trimmed = trim($line);
if ($doingtags) {
if ($line !~ /^\t/) {
$doingtags = 0;
} else {
$trimmed =~ /^([^:]*):([^:]*)/;
$tag = trim($1);
$version = trim($2);
next
unless (length($tag) && length($version));
$branchid = GetId('branches', 'branch', $tag);
$dirid = GetId('dirs', 'dir', $filehead);
$fileid = GetId('files', 'file', $filetail);
#
# Don't touch the tags database for now. Nothing uses it, and it just takes
# up too much damn space.
#
# SendSQL "replace into tags (branchid, repositoryid,
# dirid, fileid, revision) values ($branchid,
# $repositoryid, $dirid, $fileid, '$version')"
#
# Aha! Second-to-last being a zero is CVS's special way
# of remembering a branch tag.
$version =~ /(.*)\.(\d+)(\.\d+)$/;
$branchname{"$1$3"} = $tag
if ($2 eq '0');
next;
}
}
if ($line =~ /^symbolic names/) {
$doingtags = 1;
next;
} elsif ($line =~ /^revision ([0-9.]*)$/) {
$pluscount = ($minuscount = ($date = ($indesc = 0)));
$desc = ($branch = ($author = ($datestr = ($revision = ''))));
while (1) {
# Dealing with descriptions in rlog output for a
# revision...
if ($indesc) {
if (($line =~ /^-{27,30}$/) ||
($line =~ /^={75,80}$/)) {
# OK, we're done. Write it out.
if ($author && $datestr && $revision) {
$datestr =~ s!^(\d+)/(\d+/\d+)!$2/$1!;
$date = str2time($datestr, "GMT");
if ($date >= $::StartFrom) {
AddToDatabase("C|$date|$author|$::Repository|$filehead|$filetail|$revision||$branch|+$pluscount|-$minuscount", $desc);
}
}
$indesc = 0;
} else {
$desc .= $line . "\n";
}
}
# Dealing with revision information for a specific
# revision...
else {
if ($line =~ /^revision ([0-9.]*)$/) {
$pluscount = ($minuscount = 0);
$date = ($indesc = 0);
$datestr = ($desc = ($branch = ($author = "")));
$revision = $1;
$revision =~ /(.*)\.\d*$/;
$branch = $branchname{$1}
if (exists($branchname{$1}));
}
elsif ($line =~ /^date:/) {
$line =~ s!^date: ([0-9 /:]*);\s+!!;
$datestr = $1;
$line =~ s!^author: ([^;]*);\s+!!;
$author = $1;
if ($line =~ /lines: \+(\d+) -(\d+)/) {
$pluscount = $1;
$minuscount = $2;
}
}
elsif ($line =~ /^branches: [0-9 .;]*$/) {
# Ignore these lines; make sure they don't
# become part of the description.
}
else {
$indesc = 1;
$desc = "$line\n";
}
}
$line = <RLOG_PROC>;
if (!defined $line) {
last;
}
chop($line);
}
}
}
close(RLOG_PROC);
}
sub ProcessDirectory {
my ($dir) = @_;
my ($file, @files);
die "$dir: not a directory" unless (-d $dir);
die "$dir: Couldn't open for reading: $!"
unless (opendir(DIR, $dir));
@files = readdir(DIR);
closedir (DIR);
foreach $file (@files) {
next if $file eq '.';
next if $file eq '..';
$file = "$dir/$file";
if (-d $file) {
&ProcessDirectory($file);
} else {
next unless ($file =~ /,v$/);
if ($::FirstFile && ($::FirstFile ne $file)) {
print "Skipping $file...\n";
next;
}
$::FirstFile = 0;
ProcessOneFile($file);
}
}
}
$| = 1;
if ($#ARGV == 4) {
$::TreeID = $ARGV[0];
$::FORM{'startfrom'} = $ARGV[1];
$::FORM{'firstfile'} = $ARGV[2];
$::FORM{'subdir'} = $ARGV[3];
$::FORM{'modules'} = $ARGV[4];
} else {
print "Content-type: text/html
<HTML>";
CheckPassword(FormData('password'));
print "
<title>Rebuilding CVS history database... please be patient...</title>
<body>
<pre>\n";
}
$::StartFrom = ParseTimeAndCheck(FormData('startfrom'));
$::FirstFile = trim(FormData('firstfile'));
$::SubDir = trim(FormData('subdir'));
$::Modules = '';
if (defined($::FORM{'modules'})) {
$::Modules = trim(FormData('modules'));
}
Lock();
LoadTreeConfig();
Unlock();
ConnectToDatabase();
$::Repository = $::TreeInfo{$::TreeID}{'repository'};
$::Description = $::TreeInfo{$::TreeID}{'description'};
$::RepositoryID = GetId('repositories', 'repository', $::Repository);
$::StartingDir = 0;
print "
Rebuilding entire checkin history in $::Description, (`$::TreeID' tree) ...
";
Log("Rebuilding cvs history in $::Description, (`$::TreeID' tree)...");
LoadDirList();
my @Dirs = grep(!/\*$/, @::LegalDirs);
@Dirs = split(/,\s*/, $::Modules) if $::Modules;
my $StartingDir;
($StartingDir = "$::Repository/$::SubDir") =~ s!/.?$!! if $::SubDir;
print "Doing directories: @Dirs ...\n";
foreach my $Dir (@Dirs) {
my $dir = "$::Repository/$Dir";
unless (grep $Dir, @::LegalDirs) {
print "$Dir: is invalid, skipping...\n";
}
if (-f $dir) {
ProcessOneFile($dir);
} elsif (-d $dir) {
ProcessDirectory($dir);
} else {
print "$Dir: not a file or directory, skipping...\n";
}
}
exit 0;