gecko-dev/mailnews/import/oexpress/nsOEAddressIterator.cpp

335 строки
9.9 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
A sample of XPConnect. This file contains an implementation of
nsISample.
*/
#include "nscore.h"
#include "nsCRT.h"
#include "nsCOMPtr.h"
#include "nsString.h"
#include "nsReadableUtils.h"
#include "nsIComponentManager.h"
#include "nsIServiceManager.h"
#include "nsIImportService.h"
#include "nsIImportFieldMap.h"
#include "nsABBaseCID.h"
#include "nsIAbCard.h"
#include "nsOEAddressIterator.h"
#include "OEDebugLog.h"
static NS_DEFINE_CID(kAbCardPropertyCID, NS_ABCARDPROPERTY_CID);
typedef struct {
PRInt32 mozField;
PRInt32 multiLine;
ULONG mapiTag;
} MAPIFields;
/*
Fields in MAPI, not in Mozilla
PR_OFFICE_LOCATION
FIX - PR_BIRTHDAY - stored as PT_SYSTIME - FIX to extract for moz address book birthday
PR_DISPLAY_NAME_PREFIX - Mr., Mrs. Dr., etc.
PR_SPOUSE_NAME
PR_GENDER - integer, not text
FIX - PR_CONTACT_EMAIL_ADDRESSES - multiuline strings for email addresses, needs
parsing to get secondary email address for mozilla
*/
#define kIsMultiLine -2
#define kNoMultiLine -1
static MAPIFields gMapiFields[] = {
{ 35, kIsMultiLine, PR_COMMENT},
{ 6, kNoMultiLine, PR_BUSINESS_TELEPHONE_NUMBER},
{ 7, kNoMultiLine, PR_HOME_TELEPHONE_NUMBER},
{ 25, kNoMultiLine, PR_COMPANY_NAME},
{ 23, kNoMultiLine, PR_TITLE},
{ 10, kNoMultiLine, PR_CELLULAR_TELEPHONE_NUMBER},
{ 9, kNoMultiLine, PR_PAGER_TELEPHONE_NUMBER},
{ 8, kNoMultiLine, PR_BUSINESS_FAX_NUMBER},
{ 8, kNoMultiLine, PR_HOME_FAX_NUMBER},
{ 22, kNoMultiLine, PR_COUNTRY},
{ 19, kNoMultiLine, PR_LOCALITY},
{ 20, kNoMultiLine, PR_STATE_OR_PROVINCE},
{ 17, 18, PR_STREET_ADDRESS},
{ 21, kNoMultiLine, PR_POSTAL_CODE},
{ 27, kNoMultiLine, PR_PERSONAL_HOME_PAGE},
{ 26, kNoMultiLine, PR_BUSINESS_HOME_PAGE},
{ 13, kNoMultiLine, PR_HOME_ADDRESS_CITY},
{ 16, kNoMultiLine, PR_HOME_ADDRESS_COUNTRY},
{ 15, kNoMultiLine, PR_HOME_ADDRESS_POSTAL_CODE},
{ 14, kNoMultiLine, PR_HOME_ADDRESS_STATE_OR_PROVINCE},
{ 11, 12, PR_HOME_ADDRESS_STREET},
{ 24, kNoMultiLine, PR_DEPARTMENT_NAME}
};
nsOEAddressIterator::nsOEAddressIterator( CWAB *pWab, nsIAddrDatabase *database)
{
m_pWab = pWab;
m_database = database;
NS_IF_ADDREF( m_database);
}
nsOEAddressIterator::~nsOEAddressIterator()
{
NS_IF_RELEASE( m_database);
}
nsresult nsOEAddressIterator::EnumUser( const PRUnichar * pName, LPENTRYID pEid, ULONG cbEid)
{
IMPORT_LOG1( "User: %S\n", pName);
nsresult rv = NS_OK;
if (m_database) {
LPMAILUSER pUser = m_pWab->GetUser( cbEid, pEid);
if (pUser) {
// Get a new row from the database!
nsIMdbRow* newRow = nsnull;
rv = m_database->GetNewRow( &newRow);
NS_ENSURE_SUCCESS(rv, rv);
// FIXME: Check with Candice about releasing the newRow if it
// isn't added to the database. Candice's code in nsAddressBook
// never releases it but that doesn't seem right to me!
if (newRow) {
if (BuildCard( pName, newRow, pUser)) {
rv = m_database->AddCardRowToDB( newRow);
NS_ENSURE_SUCCESS(rv, rv);
IMPORT_LOG0( "* Added entry to address book database\n");
}
}
m_pWab->ReleaseUser( pUser);
}
}
return(rv);
}
nsresult nsOEAddressIterator::EnumList( const PRUnichar * pName, LPENTRYID pEid, ULONG cbEid)
{
// If no name provided then we're done.
if (!pName || !(*pName))
return NS_OK;
nsresult rv = NS_ERROR_FAILURE;
// Make sure we have db to work with.
if (!m_database)
return rv;
nsCOMPtr <nsIMdbRow> newRow;
rv = m_database->GetNewListRow(getter_AddRefs(newRow));
NS_ENSURE_SUCCESS(rv, rv);
nsCAutoString column;
column.AssignWithConversion(pName);
rv = m_database->AddListName(newRow, column.get());
NS_ENSURE_SUCCESS(rv, rv);
rv = m_database->AddCardRowToDB(newRow);
NS_ENSURE_SUCCESS(rv, rv);
rv = m_database->AddListDirNode(newRow);
return rv;
}
void nsOEAddressIterator::SanitizeValue( nsString& val)
{
val.ReplaceSubstring(NS_LITERAL_STRING("\x0D\x0A").get(),
NS_LITERAL_STRING(", ").get());
val.ReplaceChar( 13, ',');
val.ReplaceChar( 10, ',');
}
void nsOEAddressIterator::SplitString( nsString& val1, nsString& val2)
{
nsString temp;
// Find the last line if there is more than one!
PRInt32 idx = val1.RFind( "\x0D\x0A");
PRInt32 cnt = 2;
if (idx == -1) {
cnt = 1;
idx = val1.RFindChar( 13);
}
if (idx == -1)
idx= val1.RFindChar( 10);
if (idx != -1) {
val1.Right( val2, val1.Length() - idx - cnt);
val1.Left( temp, idx);
val1 = temp;
SanitizeValue( val1);
}
}
PRBool nsOEAddressIterator::BuildCard( const PRUnichar * pName, nsIMdbRow *newRow, LPMAILUSER pUser)
{
nsString lastName;
nsString firstName;
nsString eMail;
nsString nickName;
nsString middleName;
LPSPropValue pProp = m_pWab->GetUserProperty( pUser, PR_EMAIL_ADDRESS);
if (pProp) {
m_pWab->GetValueString( pProp, eMail);
SanitizeValue( eMail);
m_pWab->FreeProperty( pProp);
}
pProp = m_pWab->GetUserProperty( pUser, PR_GIVEN_NAME);
if (pProp) {
m_pWab->GetValueString( pProp, firstName);
SanitizeValue( firstName);
m_pWab->FreeProperty( pProp);
}
pProp = m_pWab->GetUserProperty( pUser, PR_SURNAME);
if (pProp) {
m_pWab->GetValueString( pProp, lastName);
SanitizeValue( lastName);
m_pWab->FreeProperty( pProp);
}
pProp = m_pWab->GetUserProperty( pUser, PR_MIDDLE_NAME);
if (pProp) {
m_pWab->GetValueString( pProp, middleName);
SanitizeValue( middleName);
m_pWab->FreeProperty( pProp);
}
pProp = m_pWab->GetUserProperty( pUser, PR_NICKNAME);
if (pProp) {
m_pWab->GetValueString( pProp, nickName);
SanitizeValue( nickName);
m_pWab->FreeProperty( pProp);
}
// The idea here is that firstName and lastName cannot both be empty!
if (firstName.IsEmpty() && lastName.IsEmpty())
firstName = pName;
nsString displayName;
pProp = m_pWab->GetUserProperty( pUser, PR_DISPLAY_NAME);
if (pProp) {
m_pWab->GetValueString( pProp, displayName);
SanitizeValue( displayName);
m_pWab->FreeProperty( pProp);
}
if (displayName.IsEmpty()) {
if (firstName.IsEmpty())
displayName = pName;
else {
displayName = firstName;
if (!middleName.IsEmpty()) {
displayName.Append(PRUnichar(' '));
displayName.Append( middleName);
}
if (!lastName.IsEmpty()) {
displayName.Append(PRUnichar(' '));
displayName.Append( lastName);
}
}
}
// We now have the required fields
// write them out followed by any optional fields!
if (!displayName.IsEmpty()) {
m_database->AddDisplayName( newRow, NS_ConvertUCS2toUTF8(displayName).get());
}
if (!firstName.IsEmpty()) {
m_database->AddFirstName( newRow, NS_ConvertUCS2toUTF8(firstName).get());
}
if (!lastName.IsEmpty()) {
m_database->AddLastName( newRow, NS_ConvertUCS2toUTF8(lastName).get());
}
if (!nickName.IsEmpty()) {
m_database->AddNickName( newRow, NS_ConvertUCS2toUTF8(nickName).get());
}
if (!eMail.IsEmpty()) {
m_database->AddPrimaryEmail( newRow, NS_ConvertUCS2toUTF8(eMail).get());
}
// Do all of the extra fields!
nsString value;
nsString line2;
nsresult rv;
// Create a field map
nsCOMPtr<nsIImportService> impSvc(do_GetService(NS_IMPORTSERVICE_CONTRACTID, &rv));
if (NS_SUCCEEDED( rv)) {
nsIImportFieldMap * pFieldMap = nsnull;
rv = impSvc->CreateNewFieldMap( &pFieldMap);
if (NS_SUCCEEDED( rv) && pFieldMap) {
int max = sizeof( gMapiFields) / sizeof( MAPIFields);
for (int i = 0; i < max; i++) {
pProp = m_pWab->GetUserProperty( pUser, gMapiFields[i].mapiTag);
if (pProp) {
m_pWab->GetValueString( pProp, value);
m_pWab->FreeProperty( pProp);
if (!value.IsEmpty()) {
if (gMapiFields[i].multiLine == kNoMultiLine) {
SanitizeValue( value);
pFieldMap->SetFieldValue( m_database, newRow, gMapiFields[i].mozField, value.get());
}
else if (gMapiFields[i].multiLine == kIsMultiLine) {
pFieldMap->SetFieldValue( m_database, newRow, gMapiFields[i].mozField, value.get());
}
else {
line2.Truncate();
SplitString( value, line2);
if (!value.IsEmpty())
pFieldMap->SetFieldValue( m_database, newRow, gMapiFields[i].mozField, value.get());
if (!line2.IsEmpty())
pFieldMap->SetFieldValue( m_database, newRow, gMapiFields[i].multiLine, line2.get());
}
}
}
}
// call fieldMap SetFieldValue based on the table of fields
NS_RELEASE( pFieldMap);
}
}
return( PR_TRUE);
}