gecko-dev/mstone/conf/sample.wld

281 строка
7.2 KiB
Plaintext

# MailStone workload configuration file
#
# Include other workload files like this:
# <include conf/morework.wld>
#
# If you want a workload included ONLY ONCE in the test, use this
# <includeOnce conf/morework.wld>
#
# See Also:
# smtp.wld - typical SMTP delivery test
# pop.wld - typical POP3 check/download test
# imap.wld - typical IMAP4 check/download test
######################################################################
# These sections discribe how the test is run:
# CONFIG, CLIENT, MONITOR, PRETEST, POSTTEST
# The <CONFIG> section defines test setup and report parameters
# Multiple <CONFIG> sections will be merged into a one.
# The equivalent command line switch is shown in parenthesis.
<CONFIG>
title POP reads # title for report and index (-b)
comments Netscape MSG4.1 # additional info at top of report (-n)
time 3m # test time (-t)
rampTime 20s # portion of test to start things (-r)
clientCount 12 # number of client connections (-l)
maxErrors 10000 # set an error abort limit
maxBlocks 50000 # stop after this many blocks
#sysConfig conf/mailhost.txt # Pull in config file (-s)
sysConfig \ # Inline config text
<PRE>\
<B> mailhost.example.com </B>\
Netscape Messaging Server 4.11\
Linux 2.2.5\
4x400Mhz Xeon (1Mb)\
2Gb RAM\
</PRE>
useGroups 1 # use group names instead of host names
telemetry 1 # log telemetry (for debugging)
# These usually dont need to be set. These are the defaults
GnuPlot gnuplot/gnuplot
RSH /usr/bin/rsh
# RSH /usr/bin/remsh # HP-UX uses this path
RCP /usr/bin/rcp
tempDir /var/tmp # client machine directory
chartWidth 640
chartHeight 480
clientCommand mailclient # CLIENT command to run
monitorCommand vmstat %f # MONITOR command to run
makeUsersArgs -4 # args to makeusers
imageType png # gnuplot image type: png, gif, ...
</CONFIG>
# Each <Client> section defines one or more client machines
# Every machine in the section will run the same number of connections
# Note that there cannot be whitespace between the client hostnames
<CLIENT HOSTS=client1,client2>
arch Linux2.2_x86
maxClients 200
maxThreads 50
# the group is only used if "useGroups" is set
group A
command mailclient -m 100 # override the command to run
</CLIENT>
# Set a specific number of processes and threads
<CLIENT HOSTS=client3,client4>
arch SunOS5.6
processes 2
threads 10
# the group is only used if "useGroups" is set
group B
</CLIENT>
# Here is how to configure a WinNT client from a Unix mail master
# The NT rshd must interoperate with Unix rsh; allow redirection of
# stdin, stdout, and stderr; and must support binary file copies.
# Denicomp's wrshdnt has been used sucessfully. www.denicomp.com
<CLIENT HOSTS=winnt01>
Arch WINNT4.0
command mailclient.exe
tempDir c:\temp
</CLIENT>
# The PreTest sections will run before the test starts
<PRETEST HOSTS=mailhost.example.com>
# RSH rsh -l mailuser
command cd /usr/netscape/msg-mailhost; ./getconf
</PRETEST>
# Each <Monitor> section defines remote monitoring commands
# for one or more machines.
# Commands containing '%c' run to completion.
# Otherwise the command will be shutdown down
<MONITOR HOSTS=mailhost.example.com>
command vmstat,%f,%c
</MONITOR>
# The PostTest sections will run after the test completes
<POSTTEST HOSTS=mailhost.example.com>
command df
</POSTTEST>
######################################################################
# available protcols: SMTP, POP3, IMAP4
# (command names are not case sensitive)
#
# Time formats use suffixes of 's', 'm', 'h', 'd'
# for seconds, minutes, hours, days
# In account formats, "%ld" is replaced by user number
# These parameters apply to the protocol sections
# Command parameter applicable command Example
#-------------------------------------------------------------------
# server <ALL> mail.example.com
# portNum <ALL> 25
# (if no value is given, the default port for that service is used)
#
# weight <ALL> 20
#
# loginFormat <ALL> test%ld
# %ld=address %ld=domain
# firstLogin <ALL> 0
# numLogins <ALL> 2000
# sequentialLogins <ALL> 1
# passwdFormat <ALL> netscape
#
# addressFormat <ALL> test%ld@mail.example%ld.com
# %ld=address %ld=domain
# firstAddress <ALL> 0
# numAddresses <ALL> 2000
# sequentialAddresses <ALL> 1
#
# numDomains <ALL> 3
# firstDomain <ALL> 0
# sequentialDomains <ALL> 1
#
# idleTime <ALL> 5m
# numLoops <ALL> 200
# loopDelay <ALL> 1m
# blockTime <ALL> 5m
#
# numRecips SMTP 3
# smtpMailFrom SMTP mailstone@mail.example.com
# file SMTP en-3k.msg
# useEHLO SMTP 1 (default is HELO)
# useAUTHLOGIN SMTP 1 (no AUTHLOGIN by default)
#
# leaveMailOnServer POP3,IMAP4 1
# leaveMailUnSeen IMAP4 1
# The <Default> section sets command block defaults
# Multiple <Default> sections will be merged into one
<DEFAULT>
server mailhost.example.com
smtpMailFrom mailhost0@mailhost.example.com
addressFormat mailhost%ld@mailhost.example.com
loginFormat mailhost%ld
passwdFormat netscape
numLogins 1000
numAddresses 1000
</DEFAULT>
# Note: empty host list means all hosts
<SMTP>
file en-1k.msg
weight 10
numAddresses 200
</SMTP>
<include conf/smtp17.wld>
# Note: the host name must be the same as specified in the CLIENT section
<POP3 HOSTS=client1,client2>
weight 10
#leaveMailOnServer 1
</POP3>
<IMAP4 HOSTS=client3>
idleTime 300
#weight 15
</IMAP4>
######################################################################
# These sections are used to generate the right graphs for the test
# This is the built in defaults
<GRAPH name=connects>
title Number of connections attempted
label Connections/sec
variables conn
field Try
</GRAPH>
<GRAPH name=connections>
title Total connections
label Connections
variables connections
</GRAPH>
<GRAPH name=connErrors>
title Number of connection errors
label Errors/sec
variables conn, banner, login, logout
field Error
</GRAPH>
<GRAPH name=msgErrors>
title Number of command/message errors
label Errors/sec
variables cmd, submit, retrieve
field Error
</GRAPH>
<GRAPH name=retrieves>
Title Number of messages read
label Messages/sec
variables retrieve
field Try
</GRAPH>
<GRAPH name=submits>
title Number of messages written
label Messages/sec
variables submit
field Try
</GRAPH>
<GRAPH name=commands>
title Number of commands sent
label Commands/sec
variables cmd
field Try
</GRAPH>
<GRAPH name=readBytes>
title Bytes read
label Bytes/sec
variables login, banner, cmd, retrieve, submit, logout
field BytesR
</GRAPH>
<GRAPH name=writeBytes>
title Bytes written
label Bytes/sec
variables login, banner, cmd, retrieve, submit, logout
field BytesW
</GRAPH>
<GRAPH name=msgTime>
title Message transfer time
label Seconds per message
variables cmd, submit, retrieve
field Time
</GRAPH>
<GRAPH name=setupTime>
Title Connection setup time
label Seconds per connection
variables conn, banner, login
field Time
</GRAPH>
<GRAPH name=blocks>
title Number of mailstone blocks executed
label Blocks/sec
variables blocks
# this is a scalar. No "field" needed/allowed
</GRAPH>