gecko-dev/editor/libeditor/SelectionState.h

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#ifndef mozilla_SelectionState_h
#define mozilla_SelectionState_h

#include "mozilla/EditorDOMPoint.h"
#include "nsCOMPtr.h"
#include "nsDirection.h"
#include "nsINode.h"
#include "nsTArray.h"
#include "nscore.h"

class nsCycleCollectionTraversalCallback;
class nsRange;
namespace mozilla {
class RangeUpdater;
namespace dom {
class Selection;
class Text;
}  // namespace dom

/**
 * A helper struct for saving/setting ranges.
 */
struct RangeItem final {
  RangeItem();

 private:
  // Private destructor, to discourage deletion outside of Release():
  ~RangeItem();

 public:
  void StoreRange(nsRange* aRange);
  already_AddRefed<nsRange> GetRange();

  NS_INLINE_DECL_MAIN_THREAD_ONLY_CYCLE_COLLECTING_NATIVE_REFCOUNTING(RangeItem)
  NS_DECL_CYCLE_COLLECTION_NATIVE_CLASS(RangeItem)

  nsCOMPtr<nsINode> mStartContainer;
  int32_t mStartOffset;
  nsCOMPtr<nsINode> mEndContainer;
  int32_t mEndOffset;
};

/**
 * mozilla::SelectionState
 *
 * Class for recording selection info.  Stores selection as collection of
 * { {startnode, startoffset} , {endnode, endoffset} } tuples.  Can't store
 * ranges since dom gravity will possibly change the ranges.
 */

class SelectionState final {
 public:
  SelectionState();
  ~SelectionState();

  void SaveSelection(dom::Selection* aSel);
  nsresult RestoreSelection(dom::Selection* aSel);
  bool IsCollapsed();
  bool IsEqual(SelectionState* aSelState);
  void MakeEmpty();
  bool IsEmpty();

 private:
  AutoTArray<RefPtr<RangeItem>, 1> mArray;
  nsDirection mDirection;

  friend class RangeUpdater;
  friend void ImplCycleCollectionTraverse(nsCycleCollectionTraversalCallback&,
                                          SelectionState&, const char*,
                                          uint32_t);
  friend void ImplCycleCollectionUnlink(SelectionState&);
};

inline void ImplCycleCollectionTraverse(
    nsCycleCollectionTraversalCallback& aCallback, SelectionState& aField,
    const char* aName, uint32_t aFlags = 0) {
  ImplCycleCollectionTraverse(aCallback, aField.mArray, aName, aFlags);
}

inline void ImplCycleCollectionUnlink(SelectionState& aField) {
  ImplCycleCollectionUnlink(aField.mArray);
}

class MOZ_STACK_CLASS RangeUpdater final {
 public:
  RangeUpdater();
  ~RangeUpdater();

  void RegisterRangeItem(RangeItem* aRangeItem);
  void DropRangeItem(RangeItem* aRangeItem);
  nsresult RegisterSelectionState(SelectionState& aSelState);
  nsresult DropSelectionState(SelectionState& aSelState);

  // editor selection gravity routines.  Note that we can't always depend on
  // DOM Range gravity to do what we want to the "real" selection.  For
  // instance, if you move a node, that corresponds to deleting it and
  // reinserting it. DOM Range gravity will promote the selection out of the
  // node on deletion, which is not what you want if you know you are
  // reinserting it.
  template <typename PT, typename CT>
  nsresult SelAdjCreateNode(const EditorDOMPointBase<PT, CT>& aPoint);
  template <typename PT, typename CT>
  nsresult SelAdjInsertNode(const EditorDOMPointBase<PT, CT>& aPoint);
  void SelAdjDeleteNode(nsINode* aNode);
  nsresult SelAdjSplitNode(nsIContent& aRightNode, nsIContent* aNewLeftNode);
  nsresult SelAdjJoinNodes(nsINode& aLeftNode, nsINode& aRightNode,
                           nsINode& aParent, int32_t aOffset,
                           int32_t aOldLeftNodeLength);
  void SelAdjInsertText(dom::Text& aTextNode, int32_t aOffset,
                        const nsAString& aString);
  nsresult SelAdjDeleteText(nsIContent* aTextNode, int32_t aOffset,
                            int32_t aLength);
  // the following gravity routines need will/did sandwiches, because the other
  // gravity routines will be called inside of these sandwiches, but should be
  // ignored.
  nsresult WillReplaceContainer();
  nsresult DidReplaceContainer(dom::Element* aOriginalNode,
                               dom::Element* aNewNode);
  nsresult WillRemoveContainer();
  nsresult DidRemoveContainer(nsINode* aNode, nsINode* aParent, int32_t aOffset,
                              uint32_t aNodeOrigLen);
  nsresult WillInsertContainer();
  nsresult DidInsertContainer();
  void WillMoveNode();
  void DidMoveNode(nsINode* aOldParent, int32_t aOldOffset, nsINode* aNewParent,
                   int32_t aNewOffset);

 private:
  nsTArray<RefPtr<RangeItem>> mArray;
  bool mLock;
};

/**
 * Helper class for using SelectionState.  Stack based class for doing
 * preservation of dom points across editor actions.
 */

class MOZ_STACK_CLASS AutoTrackDOMPoint final {
 private:
  RangeUpdater& mRangeUpdater;
  // Allow tracking nsINode until nsNode is gone
  nsCOMPtr<nsINode>* mNode;
  int32_t* mOffset;
  EditorDOMPoint* mPoint;
  RefPtr<RangeItem> mRangeItem;

 public:
  AutoTrackDOMPoint(RangeUpdater& aRangeUpdater, nsCOMPtr<nsINode>* aNode,
                    int32_t* aOffset)
      : mRangeUpdater(aRangeUpdater),
        mNode(aNode),
        mOffset(aOffset),
        mPoint(nullptr) {
    mRangeItem = new RangeItem();
    mRangeItem->mStartContainer = *mNode;
    mRangeItem->mEndContainer = *mNode;
    mRangeItem->mStartOffset = *mOffset;
    mRangeItem->mEndOffset = *mOffset;
    mRangeUpdater.RegisterRangeItem(mRangeItem);
  }

  AutoTrackDOMPoint(RangeUpdater& aRangeUpdater, EditorDOMPoint* aPoint)
      : mRangeUpdater(aRangeUpdater),
        mNode(nullptr),
        mOffset(nullptr),
        mPoint(aPoint) {
    mRangeItem = new RangeItem();
    mRangeItem->mStartContainer = mPoint->GetContainer();
    mRangeItem->mEndContainer = mPoint->GetContainer();
    mRangeItem->mStartOffset = mPoint->Offset();
    mRangeItem->mEndOffset = mPoint->Offset();
    mRangeUpdater.RegisterRangeItem(mRangeItem);
  }

  ~AutoTrackDOMPoint() {
    mRangeUpdater.DropRangeItem(mRangeItem);
    if (mPoint) {
      mPoint->Set(mRangeItem->mStartContainer, mRangeItem->mStartOffset);
      return;
    }
    *mNode = mRangeItem->mStartContainer;
    *mOffset = mRangeItem->mStartOffset;
  }
};

/**
 * Another helper class for SelectionState.  Stack based class for doing
 * Will/DidReplaceContainer()
 */

class MOZ_STACK_CLASS AutoReplaceContainerSelNotify final {
 private:
  RangeUpdater& mRangeUpdater;
  dom::Element* mOriginalElement;
  dom::Element* mNewElement;

 public:
  AutoReplaceContainerSelNotify(RangeUpdater& aRangeUpdater,
                                dom::Element* aOriginalElement,
                                dom::Element* aNewElement)
      : mRangeUpdater(aRangeUpdater),
        mOriginalElement(aOriginalElement),
        mNewElement(aNewElement) {
    mRangeUpdater.WillReplaceContainer();
  }

  ~AutoReplaceContainerSelNotify() {
    mRangeUpdater.DidReplaceContainer(mOriginalElement, mNewElement);
  }
};

/**
 * Another helper class for SelectionState.  Stack based class for doing
 * Will/DidRemoveContainer()
 */

class MOZ_STACK_CLASS AutoRemoveContainerSelNotify final {
 private:
  RangeUpdater& mRangeUpdater;
  nsINode* mNode;
  nsINode* mParent;
  int32_t mOffset;
  uint32_t mNodeOrigLen;

 public:
  AutoRemoveContainerSelNotify(RangeUpdater& aRangeUpdater, nsINode* aNode,
                               nsINode* aParent, int32_t aOffset,
                               uint32_t aNodeOrigLen)
      : mRangeUpdater(aRangeUpdater),
        mNode(aNode),
        mParent(aParent),
        mOffset(aOffset),
        mNodeOrigLen(aNodeOrigLen) {
    mRangeUpdater.WillRemoveContainer();
  }

  ~AutoRemoveContainerSelNotify() {
    mRangeUpdater.DidRemoveContainer(mNode, mParent, mOffset, mNodeOrigLen);
  }
};

/**
 * Another helper class for SelectionState.  Stack based class for doing
 * Will/DidInsertContainer()
 */

class MOZ_STACK_CLASS AutoInsertContainerSelNotify final {
 private:
  RangeUpdater& mRangeUpdater;

 public:
  explicit AutoInsertContainerSelNotify(RangeUpdater& aRangeUpdater)
      : mRangeUpdater(aRangeUpdater) {
    mRangeUpdater.WillInsertContainer();
  }

  ~AutoInsertContainerSelNotify() { mRangeUpdater.DidInsertContainer(); }
};

/**
 * Another helper class for SelectionState.  Stack based class for doing
 * Will/DidMoveNode()
 */

class MOZ_STACK_CLASS AutoMoveNodeSelNotify final {
 public:
  AutoMoveNodeSelNotify(RangeUpdater& aRangeUpdater,
                        const EditorDOMPoint& aOldPoint,
                        const EditorDOMPoint& aNewPoint)
      : mRangeUpdater(aRangeUpdater),
        mOldParent(aOldPoint.GetContainer()),
        mNewParent(aNewPoint.GetContainer()),
        mOldOffset(aOldPoint.Offset()),
        mNewOffset(aNewPoint.Offset()) {
    MOZ_ASSERT(mOldParent);
    MOZ_ASSERT(mNewParent);
    mRangeUpdater.WillMoveNode();
  }

  ~AutoMoveNodeSelNotify() {
    mRangeUpdater.DidMoveNode(mOldParent, mOldOffset, mNewParent, mNewOffset);
  }

  EditorRawDOMPoint ComputeInsertionPoint() const {
    if (mOldParent == mNewParent && mOldOffset < mNewOffset) {
      return EditorRawDOMPoint(mNewParent, mNewOffset - 1);
    }
    return EditorRawDOMPoint(mNewParent, mNewOffset);
  }

 private:
  RangeUpdater& mRangeUpdater;
  nsINode* mOldParent;
  nsINode* mNewParent;
  uint32_t mOldOffset;
  uint32_t mNewOffset;
};

}  // namespace mozilla

#endif  // #ifndef mozilla_SelectionState_h