gecko-dev/view/public/nsIView.h

273 строки
9.9 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsIView_h___
#define nsIView_h___
#include "nsISupports.h"
#include "nsCoord.h"
#include <stdio.h>
#include "nsIWidget.h"
class nsIViewManager;
struct nsRect;
// Enumerated type to indicate the visibility of a layer.
// hide - the layer is not shown.
// show - the layer is shown irrespective of the visibility of
// the layer's parent.
enum nsViewVisibility {
nsViewVisibility_kHide = 0,
nsViewVisibility_kShow = 1
};
// IID for the nsIView interface
#define NS_IVIEW_IID \
{ 0xf0a21c40, 0xa7e1, 0x11d1, \
{ 0xa8, 0x24, 0x00, 0x40, 0x95, 0x9a, 0x28, 0xc9 } }
//----------------------------------------------------------------------
/**
* View interface
*
* Views are NOT reference counted. Use the Destroy() member function to
* destroy a view.
*
* The lifetime of the view hierarchy is bounded by the lifetime of the
* view manager that owns the views.
*
* Most of the methods here are read-only. To set the corresponding properties
* of a view, go through nsIViewManager.
*/
class nsIView : public nsISupports
{
public:
NS_DEFINE_STATIC_IID_ACCESSOR(NS_IVIEW_IID)
/**
* Initialize the view
* @param aManager view manager that "owns" the view. The view does NOT
* hold a reference to the view manager
* @param aBounds initial bounds for view
* @param aParent intended parent for view. this is not actually set in the
* nsIView through this method. it is only used by the initialization
* code to walk up the view tree, if necessary, to find resources.
* @param aVisibilityFlag initial visibility state of view
* @result The result of the initialization, NS_OK if no errors
*/
NS_IMETHOD Init(nsIViewManager* aManager,
const nsRect &aBounds,
const nsIView *aParent,
nsViewVisibility aVisibilityFlag = nsViewVisibility_kShow) = 0;
/**
* Destroy the view.
*
* The view destroys its child views, and destroys and releases its
* widget (if it has one).
*
* Also informs the view manager that the view is destroyed by calling
* SetRootView(NULL) if the view is the root view and calling RemoveChild()
* otherwise.
*/
NS_IMETHOD Destroy() = 0;
/**
* Get the view manager which "owns" the view.
* This method might require some expensive traversal work in the future. If you can get the
* view manager from somewhere else, do that instead.
* @result the view manager
*/
NS_IMETHOD GetViewManager(nsIViewManager *&aViewMgr) const = 0;
/**
* Called to get the position of a view.
* The specified coordinates are in the parent view's coordinate space.
* This is the (0, 0) origin of the coordinate space established by this view.
* @param x out parameter for x position
* @param y out parameter for y position
*/
NS_IMETHOD GetPosition(nscoord *aX, nscoord *aY) const = 0;
/**
* Called to get the dimensions and position of the view's bounds.
* The view's bounds (x,y) are in the coordinate space of the parent view.
* The view's bounds (x,y) might not be the same as the view's position,
* if the view has content above or to the left of its origin.
* @param aBounds out parameter for bounds
*/
NS_IMETHOD GetBounds(nsRect &aBounds) const = 0;
/**
* Called to query the visibility state of a view.
* @result current visibility state
*/
NS_IMETHOD GetVisibility(nsViewVisibility &aVisibility) const = 0;
/**
* Called to query the z-index of a view.
* The z-index is relative to all siblings of the view.
* @param aAuto PR_TRUE if the view is zindex:auto
* @param aZIndex explicit z-index value.
* @param aTopMost used when this view is zindex:auto
* PR_TRUE if the view is topmost when compared
* with another z-index:auto view
*
*/
NS_IMETHOD GetZIndex(PRBool &aAuto, PRInt32 &aZIndex, PRBool &aTopMost) const = 0;
/**
* Get whether the view "floats" above all other views,
* which tells the compositor not to consider higher views in
* the view hierarchy that would geometrically intersect with
* this view. This is a hack, but it fixes some problems with
* views that need to be drawn in front of all other views.
* @result PR_TRUE if the view floats, PR_FALSE otherwise.
*/
NS_IMETHOD GetFloating(PRBool &aFloatingView) const = 0;
/**
* Called to query the parent of the view.
* @result view's parent
*/
NS_IMETHOD GetParent(nsIView *&aParent) const = 0;
/**
* The view's first child is the child which is earliest in document order.
* @result first child
*/
NS_IMETHOD GetFirstChild(nsIView* &aChild) const = 0;
/**
* Called to query the next sibling of the view.
* @result view's next sibling
*/
NS_IMETHOD GetNextSibling(nsIView *&aNextSibling) const = 0;
/**
* Note: This didn't exist in 4.0. Called to get the opacity of a view.
* A value of 0.0 means completely transparent. A value of 1.0 means
* completely opaque.
* @result view's opacity value
*/
NS_IMETHOD GetOpacity(float &aOpacity) const = 0;
/**
* Used to ask a view if it has any areas within its bounding box
* that are transparent. This is not the same as opacity - opacity can
* be set externally, transparency is a quality of the view itself.
* @result Returns PR_TRUE if there are transparent areas, PR_FALSE otherwise.
*/
NS_IMETHOD HasTransparency(PRBool &aTransparent) const = 0;
/**
* Set the view's link to client owned data.
* @param aData - data to associate with view. nsnull to disassociate
*/
NS_IMETHOD SetClientData(void *aData) = 0;
/**
* Query the view for it's link to client owned data.
* @result data associated with view or nsnull if there is none.
*/
NS_IMETHOD GetClientData(void *&aData) const = 0;
/**
* Get the nearest widget in this view or a parent of this view and
* the offset from the view that contains the widget to this view
* @param aDx out parameter for x offset
* @param aDy out parameter for y offset
* @return widget (if there is one) closest to view
*/
NS_IMETHOD GetOffsetFromWidget(nscoord *aDx, nscoord *aDy, nsIWidget *&aWidget) = 0;
/**
* Create a widget to associate with this view. This is a helper
* function for SetWidget.
* @param aWindowIID IID for Widget type that this view
* should have associated with it. if nsull, then no
* width will be created for this view
* @param aWidgetInitData data used to initialize this view's widget before
* its create is called.
* @param aNative native window that will be used as parent of
* aWindowIID. if nsnull, then parent will be derived from
* parent view and it's ancestors
* @param aWindowType is either content, UI or inherit from parent window.
* This is used to expose what type of window this is to
* assistive technology like screen readers.
* @return error status
*/
NS_IMETHOD CreateWidget(const nsIID &aWindowIID,
nsWidgetInitData *aWidgetInitData = nsnull,
nsNativeWidget aNative = nsnull,
PRBool aEnableDragDrop = PR_TRUE,
PRBool aResetVisibility = PR_TRUE,
nsContentType aWindowType = eContentTypeInherit) = 0;
/**
* In 4.0, the "cutout" nature of a view is queryable.
* If we believe that all cutout view have a native widget, this
* could be a replacement.
* @param aWidget out parameter for widget that this view contains,
* or nsnull if there is none.
*/
NS_IMETHOD GetWidget(nsIWidget *&aWidget) const = 0;
/**
* Returns PR_TRUE if the view has a widget associated with it.
* @param aHasWidget out parameter that indicates whether a view has a widget.
*/
NS_IMETHOD HasWidget(PRBool *aHasWidget) const = 0;
// XXX Temporary for Bug #19416
NS_IMETHOD IgnoreSetPosition(PRBool aShouldIgnore) = 0;
/**
* Output debug info to FILE
* @param out output file handle
* @param aIndent indentation depth
*/
NS_IMETHOD List(FILE* out, PRInt32 aIndent = 0) const = 0;
private:
NS_IMETHOD_(nsrefcnt) AddRef(void) = 0;
NS_IMETHOD_(nsrefcnt) Release(void) = 0;
};
#endif