gecko-dev/directory/Makefile

212 строки
6.5 KiB
Makefile

#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla Communicator client code, released
# March 31, 1998.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1998-1999
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the terms of
# either of the GNU General Public License Version 2 or later (the "GPL"),
# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
LDAP_DEPTH = .
NSPR_TREE = ../nsprpub
NSS_TREE = ../security
MOD_DEPTH = ../nsprpub
CORECONFDIR = ../coreconf
ALTCORECONFDIR = ../../coreconf
DEPTH = ..
CONFIGDIR = c-sdk/config
MOD_DEPTH = c-sdk
include $(CONFIGDIR)/config.mk
include c-sdk/build.mk
ifeq ($(COMPONENT_PULL_METHOD), FTP)
COMP_PULL_ARG="USE_FTP=YES"
endif
all: FORCE
@echo
@echo The following are build targets that you can choose from:
@echo
@echo " gmake buildLdapClientSDK"
@echo " gmake clean"
@echo
@echo Allowed options:
@echo
@echo " BUILD_OPT=1 for optimized build"
@echo " USE_PTHREADS=1 for using pthreads"
@echo " USE_64=1 for building 64 bit versions"
@echo " BUILD_CLU=1 build command line utilities"
@echo " COMPS_FROM_OBJDIR=1 use components from ../dist/$(OBJDIR_NAME)"
@echo " SOLARIS_USE_FORTE6=1 use Sun Workshop 6/Forte compiler on SunOS 5.6"
@echo " VENDOR_NAME=string SDK vendor name (default $(DEFAULT_VENDOR_NAME))"
@echo " VENDOR_VERSION=# vendor specific version number * 100 (default $(DEFAULT_VENDOR_VERSION))"
@echo
@echo Internal options
@echo
@echo " gmake buildAndPkgLdapSDK"
@echo " gmake PullSDKComponents"
@echo " gmake pkgLdapSDK"
@echo
@echo " HAVE_LIBNLS=1 for building/linking with LIBNLS"
@echo " HAVE_CCONF=1 for building with components"
@echo " HAVE_SVRCORE=1 for building with svrcore"
@echo " DONT_REPULL=1 for not repulling components"
@echo " PKG_PRIVATE_HDRS=0 do not ship private headers"
@echo " PKG_PRIVATE_LIBS=0 do not ship private libraries"
@echo " PKG_DEP_LIBS=0 do not ship dependent libraries"
ifneq ($(OS_ARCH), WINNT)
@echo " COMPONENT_PULL_METHOD=FTP pull components using FTP"
endif
@echo
@echo " For internal builds, coreconf must be installed"
@echo " in $(CORECONFDIR)"
buildLdapClientSDK export: PullSDKComponents
@echo
@echo ==== Starting LDAP Client SDK ==========
@echo
ifneq ($(HAVE_CCONF), 1)
@if [ -d $(NSPR_TREE)/ ]; then \
echo "NSPR $(NSPR_VERSION) directory found"; \
else \
echo "No NSPR $(NSPR_VERSION) directory found"; \
fi
@if [ -d $(NSS_TREE)/ ]; then \
echo "NSS $(NSS_VERSION) directory found"; \
else \
echo "No NSS $(NSS_VERSION) directory found"; \
fi
else
@if [ -d $(CORECONFDIR)/ ]; then \
echo "coreconf $(CORECONFDIR) directory found"; \
else \
echo "No $(CORECONFDIR) found checking for alternate location"; \
if [ -d $(ALTCORECONFDIR)/ ]; then \
echo "found $(ALTCORECONFDIR)....copying to $(CORECONFDIR)/"; \
cp -r $(ALTCORECONFDIR) $(CORECONFDIR); \
else \
echo "No coreconf directory found"; \
exit 1; \
fi \
fi
@if [ -d $(CORECONFDIR)/ ]; then \
cd $(CORECONFDIR); \
gmake; \
else \
echo "No $(CORECONFDIR) directory found"; \
fi
endif
@if [ -d $(CONFIGDIR)/ ]; then \
cd $(CONFIGDIR); \
gmake; \
else \
echo "No $(CONFIGDIR) directory found"; \
fi
@if [ -d $(LDAP_DEPTH)/c-sdk/ldap ]; then \
cd $(LDAP_DEPTH)/c-sdk/ldap; \
$(MAKE) -f Makefile.client $(MFLAGS) export; \
$(MAKE) -f Makefile.client $(MFLAGS) install; \
else \
echo "No LDAP directory -- skipping"; \
exit 0; \
fi
pkgLdapSDK: FORCE
@echo
@echo ==== Starting LDAP Client SDK packaging ===
@echo
@if [ -d $(DIST_TREE)/ ]; then \
cd $(LDAP_DEPTH)/c-sdk/; \
$(MAKE) -f package.mk $(MFLAGS) all; \
else \
echo "No dist directory found -- can't package"; \
exit 0; \
fi
buildAndPkgLdapSDK: buildLdapClientSDK pkgLdapSDK
PullSDKComponents: FORCE
@echo
@echo ==== Starting to pull components ==========
@echo
ifneq ($(DONT_REPULL), 1)
ifeq ($(HAVE_CCONF), 1)
@if [ -d $(CORECONFDIR)/ ]; then \
echo "coreconf $(CORECONFDIR) directory found"; \
else \
echo "No $(CORECONFDIR) found checking for alternate location"; \
if [ -d $(ALTCORECONFDIR)/ ]; then \
echo "found $(ALTCORECONFDIR)....copying to $(CORECONFDIR)/"; \
cp -r $(ALTCORECONFDIR) $(CORECONFDIR); \
else \
echo "No coreconf directory found"; \
exit 1; \
fi \
fi
@if [ -d $(CORECONFDIR)/ ]; then \
cd $(CORECONFDIR); \
gmake; \
else \
echo "No $(CORECONFDIR) directory found"; \
fi
# cd $(CORECONFDIR)/dbm; \
# $(MAKE) VERSION=$(DBM_RELEASE_TAG) $(MFLAGS) $(COMP_PULL_ARG) import
cd $(CORECONFDIR)/nspr20; \
$(MAKE) RELEASE_TREE=$(NSPR_RELEASE_TREE) \
VERSION=$(NSPR_RELEASE_TAG) $(MFLAGS) $(COMP_PULL_ARG) import
cd $(CORECONFDIR)/security; \
$(MAKE) RELEASE_TREE=$(NSS_RELEASE_TREE) \
VERSION=$(NSS_RELEASE_TAG) $(MFLAGS) $(COMP_PULL_ARG) import
cd $(CORECONFDIR)/svrcore; \
$(MAKE) RELEASE_TREE=$(SVRCORE_RELEASE_TREE) \
VERSION=$(SVRCORE_RELEASE_TAG) $(MFLAGS) $(COMP_PULL_ARG) import
endif
endif
clean clobber: FORCE
@if [ -d $(LDAP_DEPTH)/c-sdk/ldap ]; then \
cd $(LDAP_DEPTH)/c-sdk/ldap; \
$(MAKE) -f Makefile.client $(MFLAGS) clean; \
else \
echo "No LDAP directory -- skipping"; \
exit 0; \
fi
@if [ -d $(CONFIGDIR) ]; then \
cd $(CONFIGDIR); \
gmake cleanconfig; \
fi
FORCE: