gecko-dev/build/devicemanager.py

592 строки
16 KiB
Python

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Test Automation Framework.
#
# The Initial Developer of the Original Code is Joel Maher.
#
# Portions created by the Initial Developer are Copyright (C) 2009
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Joel Maher <joel.maher@gmail.com> (Original Developer)
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
import socket
import time, datetime
import os
import re
import hashlib
import subprocess
from threading import Thread
import traceback
import sys
class myProc(Thread):
def __init__(self, hostip, hostport, cmd, new_line = True, sleeptime = 0):
self.cmdline = cmd
self.newline = new_line
self.sleep = sleeptime
self.host = hostip
self.port = hostport
Thread.__init__(self)
def run(self):
promptre =re.compile('.*\$\>.$')
data = ""
try:
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
except:
return None
try:
s.connect((self.host, int(self.port)))
except:
s.close()
return None
try:
s.recv(1024)
except:
s.close()
return None
for cmd in self.cmdline:
if (cmd == 'quit'): break
if self.newline: cmd += '\r\n'
try:
s.send(cmd)
except:
s.close()
return None
time.sleep(int(self.sleep))
found = False
while (found == False):
try:
temp = s.recv(1024)
except:
s.close()
return None
lines = temp.split('\n')
for line in lines:
if (promptre.match(line)):
found = True
data += temp
try:
s.send('quit\r\n')
except:
s.close()
return None
try:
s.close()
except:
return None
return data
class DeviceManager:
host = ''
port = 0
debug = 3
_redo = False
deviceRoot = '/tests'
tempRoot = os.getcwd()
def __init__(self, host, port = 27020):
self.host = host
self.port = port
self._sock = None
def sendCMD(self, cmdline, newline = True, sleep = 0):
promptre = re.compile('.*\$\>.$')
# TODO: any commands that don't output anything and quit need to match this RE
pushre = re.compile('^push .*$')
data = ""
noQuit = False
if (self._sock == None):
try:
if (self.debug >= 1):
print "reconnecting socket"
self._sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
except:
self._redo = True
self._sock = None
if (self.debug >= 2):
print "unable to create socket"
return None
try:
self._sock.connect((self.host, int(self.port)))
self._sock.recv(1024)
except:
self._redo = True
self._sock.close()
self._sock = None
if (self.debug >= 2):
print "unable to connect socket"
return None
for cmd in cmdline:
if (cmd == 'quit'): break
if newline: cmd += '\r\n'
try:
self._sock.send(cmd)
except:
self._redo = True
self._sock.close()
self._sock = None
return None
if (pushre.match(cmd) or cmd == 'rebt'):
noQuit = True
elif noQuit == False:
time.sleep(int(sleep))
found = False
while (found == False):
if (self.debug >= 3): print "recv'ing..."
try:
temp = self._sock.recv(1024)
except:
self._redo = True
self._sock.close()
self._sock = None
return None
lines = temp.split('\n')
for line in lines:
if (promptre.match(line)):
found = True
data += temp
time.sleep(int(sleep))
if (noQuit == True):
try:
self._sock.close()
self._sock = None
except:
self._redo = True
self._sock = None
return None
return data
# take a data blob and strip instances of the prompt '$>\x00'
def stripPrompt(self, data):
promptre = re.compile('.*\$\>.*')
retVal = []
lines = data.split('\n')
for line in lines:
try:
while (promptre.match(line)):
pieces = line.split('\x00')
index = pieces.index("$>")
pieces.pop(index)
line = '\x00'.join(pieces)
except(ValueError):
pass
retVal.append(line)
return '\n'.join(retVal)
def pushFile(self, localname, destname):
if (self.debug >= 2):
print "in push file with: " + localname + ", and: " + destname
if (self.validateFile(destname, localname) == True):
if (self.debug >= 2):
print "files are validated"
return ''
self.mkDirs(destname)
if (self.debug >= 2):
print "sending: push " + destname
# sleep 5 seconds / MB
filesize = os.path.getsize(localname)
sleepsize = 1024 * 1024
sleepTime = (int(filesize / sleepsize) * 5) + 2
f = open(localname, 'rb')
data = f.read()
f.close()
retVal = self.sendCMD(['push ' + destname + '\r\n', data], newline = False, sleep = sleepTime)
if (retVal == None):
if (self.debug >= 2):
print "Error in sendCMD, not validating push"
return None
if (self.validateFile(destname, localname) == False):
if (self.debug >= 2):
print "file did not copy as expected"
return None
return retVal
def mkDir(self, name):
return self.sendCMD(['mkdr ' + name, 'quit'])
# make directory structure on the device
def mkDirs(self, filename):
parts = filename.split('/')
name = ""
for part in parts:
if (part == parts[-1]): break
if (part != ""):
name += '/' + part
if (self.mkDir(name) == None):
return None
# push localDir from host to remoteDir on the device
def pushDir(self, localDir, remoteDir):
if (self.debug >= 2): print "pushing directory: " + localDir + " to " + remoteDir
for root, dirs, files in os.walk(localDir):
parts = root.split(localDir)
for file in files:
print "examining file: " + file
remoteRoot = remoteDir + '/' + parts[1]
remoteName = remoteRoot + '/' + file
if (parts[1] == ""): remoteRoot = remoteDir
if (self.pushFile(os.path.join(root, file), remoteName) == None):
time.sleep(5)
self.removeFile(remoteName)
time.sleep(5)
if (self.pushFile(os.path.join(root, file), remoteName) == None):
return None
return True
def dirExists(self, dirname):
match = ".*" + dirname + "$"
dirre = re.compile(match)
data = self.sendCMD(['cd ' + dirname, 'cwd', 'quit'], sleep = 1)
if (data == None):
return None
retVal = self.stripPrompt(data)
data = retVal.split('\n')
found = False
for d in data:
if (dirre.match(d)):
found = True
return found
# Because we always have / style paths we make this a lot easier with some
# assumptions
def fileExists(self, filepath):
s = filepath.split('/')
containingpath = '/'.join(s[:-1])
listfiles = self.listFiles(containingpath)
for f in listfiles:
if (f == s[-1]):
return True
return False
# list files on the device, requires cd to directory first
def listFiles(self, rootdir):
if (self.dirExists(rootdir) == False):
return []
data = self.sendCMD(['cd ' + rootdir, 'ls', 'quit'], sleep=1)
if (data == None):
return None
retVal = self.stripPrompt(data)
return retVal.split('\n')
def removeFile(self, filename):
if (self.debug>= 2): print "removing file: " + filename
return self.sendCMD(['rm ' + filename, 'quit'])
# does a recursive delete of directory on the device: rm -Rf remoteDir
def removeDir(self, remoteDir):
self.sendCMD(['rmdr ' + remoteDir], sleep = 5)
def getProcessList(self):
data = self.sendCMD(['ps', 'quit'], sleep = 3)
if (data == None):
return None
retVal = self.stripPrompt(data)
lines = retVal.split('\n')
files = []
for line in lines:
if (line.strip() != ''):
pidproc = line.strip().split(' ')
if (len(pidproc) == 2):
files += [[pidproc[0], pidproc[1]]]
return files
def getMemInfo(self):
data = self.sendCMD(['mems', 'quit'])
if (data == None):
return None
retVal = self.stripPrompt(data)
# TODO: this is hardcoded for now
fhandle = open("memlog.txt", 'a')
fhandle.write("\n")
fhandle.write(retVal)
fhandle.close()
def fireProcess(self, appname):
if (self.debug >= 2): print "FIRE PROC: '" + appname + "'"
self.process = myProc(self.host, self.port, ['exec ' + appname, 'quit'])
self.process.start()
def launchProcess(self, cmd, outputFile = "process.txt", cwd = ''):
if (outputFile == "process.txt"):
outputFile = self.getDeviceRoot() + '/' + "process.txt"
cmdline = subprocess.list2cmdline(cmd)
self.fireProcess(cmdline + " > " + outputFile)
handle = outputFile
return handle
def communicate(self, process, timeout = 600):
timed_out = True
if (timeout > 0):
total_time = 0
while total_time < timeout:
time.sleep(1)
if (not self.poll(process)):
timed_out = False
break
total_time += 1
if (timed_out == True):
return None
return [self.getFile(process, "temp.txt"), None]
def poll(self, process):
try:
if (not self.process.isAlive()):
return None
return 1
except:
return None
return 1
# iterates process list and returns pid if exists, otherwise ''
def processExist(self, appname):
pid = ''
pieces = appname.split('/')
app = pieces[-1]
procre = re.compile('.*' + app + '.*')
procList = self.getProcessList()
if (procList == None):
return None
for proc in procList:
if (procre.match(proc[1])):
pid = proc[0]
break
return pid
def killProcess(self, appname):
if (self.sendCMD(['kill ' + appname]) == None):
return None
return True
def getTempDir(self):
promptre = re.compile('.*\$\>\x00.*')
retVal = ''
data = self.sendCMD(['tmpd', 'quit'])
if (data == None):
return None
return self.stripPrompt(data).strip('\n')
# copy file from device (remoteFile) to host (localFile)
def getFile(self, remoteFile, localFile = ''):
if localFile == '':
localFile = os.path.join(self.tempRoot, "temp.txt")
promptre = re.compile('.*\$\>\x00.*')
data = self.sendCMD(['cat ' + remoteFile, 'quit'], sleep = 5)
if (data == None):
return None
retVal = self.stripPrompt(data)
fhandle = open(localFile, 'wb')
fhandle.write(retVal)
fhandle.close()
return retVal
# copy directory structure from device (remoteDir) to host (localDir)
def getDirectory(self, remoteDir, localDir):
if (self.debug >= 2): print "getting files in '" + remoteDir + "'"
filelist = self.listFiles(remoteDir)
if (filelist == None):
return None
if (self.debug >= 3): print filelist
if not os.path.exists(localDir):
os.makedirs(localDir)
# TODO: is this a comprehensive file regex?
isFile = re.compile('^([a-zA-Z0-9_\-\. ]+)\.([a-zA-Z0-9]+)$')
for f in filelist:
if (isFile.match(f)):
if (self.getFile(remoteDir + '/' + f, os.path.join(localDir, f)) == None):
return None
else:
if (self.getDirectory(remoteDir + '/' + f, os.path.join(localDir, f)) == None):
return None
# true/false check if the two files have the same md5 sum
def validateFile(self, remoteFile, localFile):
remoteHash = self.getRemoteHash(remoteFile)
localHash = self.getLocalHash(localFile)
if (remoteHash == localHash):
return True
return False
# return the md5 sum of a remote file
def getRemoteHash(self, filename):
data = self.sendCMD(['hash ' + filename, 'quit'], sleep = 1)
if (data == None):
return ''
retVal = self.stripPrompt(data)
if (retVal != None):
retVal = retVal.strip('\n')
if (self.debug >= 3):
print "remote hash: '" + retVal + "'"
return retVal
# return the md5 sum of a file on the host
def getLocalHash(self, filename):
file = open(filename, 'rb')
if (file == None):
return None
try:
mdsum = hashlib.md5()
except:
return None
while 1:
data = file.read(1024)
if not data:
break
mdsum.update(data)
file.close()
hexval = mdsum.hexdigest()
if (self.debug >= 3):
print "local hash: '" + hexval + "'"
return hexval
# Gets the device root for the testing area on the device
# For all devices we will use / type slashes and depend on the device-agent
# to sort those out.
# Structure on the device is as follows:
# /tests
# /<fennec>|<firefox> --> approot
# /profile
# /xpcshell
# /reftest
# /mochitest
def getDeviceRoot(self):
if (not self.deviceRoot):
if (self.dirExists('/tests')):
self.deviceRoot = '/tests'
else:
self.mkDir('/tests')
self.deviceRoot = '/tests'
return self.deviceRoot
# Either we will have /tests/fennec or /tests/firefox but we will never have
# both. Return the one that exists
def getAppRoot(self):
if (self.dirExists(self.getDeviceRoot() + '/fennec')):
return self.getDeviceRoot() + '/fennec'
else:
return self.getDeviceRoot() + '/firefox'
# Gets the directory location on the device for a specific test type
# Type is one of: xpcshell|reftest|mochitest
def getTestRoot(self, type):
if (re.search('xpcshell', type, re.I)):
self.testRoot = self.getDeviceRoot() + '/xpcshell'
elif (re.search('?(i)reftest', type)):
self.testRoot = self.getDeviceRoot() + '/reftest'
elif (re.search('?(i)mochitest', type)):
self.testRoot = self.getDeviceRoot() + '/mochitest'
return self.testRoot
# Sends a specific process ID a signal code and action.
# For Example: SIGINT and SIGDFL to process x
def signal(self, processID, signalType, signalAction):
# currently not implemented in device agent - todo
pass
# Get a return code from process ending -- needs support on device-agent
# this is a todo
def getReturnCode(self, processID):
# todo make this real
return 0
def unpackFile(self, filename):
self.sendCMD(['cd /tests', 'unzp ' + filename])
# validate localDir from host to remoteDir on the device
def validateDir(self, localDir, remoteDir):
if (self.debug >= 2): print "validating directory: " + localDir + " to " + remoteDir
for root, dirs, files in os.walk(localDir):
parts = root.split(localDir)
for file in files:
remoteRoot = remoteDir + '/' + parts[1]
remoteRoot = remoteRoot.replace('/', '/')
if (parts[1] == ""): remoteRoot = remoteDir
remoteName = remoteRoot + '/' + file
if (self.validateFile(remoteName, os.path.join(root, file)) <> True):
return None
return True