gecko-dev/dom/interfaces/base/nsITextInputProcessorCallba...

240 строки
9.5 KiB
Plaintext

/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "nsISupports.idl"
interface nsITextInputProcessor;
/**
* nsITextInputProcessorNotification stores the type of notification to IME and
* its detail. See each explanation of attribute for the detail.
*/
[scriptable, builtinclass, uuid(c0ce1add-82bb-45ab-b99a-42cfba7fd5d7)]
interface nsITextInputProcessorNotification : nsISupports
{
/**
* type attribute represents what's notified or requested. Value must be
* one of following values:
*
* "request-to-commit" (required to be handled)
* This is requested when Gecko believes that active composition should be
* committed. nsITextInputProcessorCallback::onNotify() has to handle this
* notification.
*
* "request-to-cancel" (required to be handled)
* This is requested when Gecko believes that active composition should be
* canceled. I.e., composition should be committed with empty string.
* nsITextInputProcessorCallback::onNotify() has to handle this
* notification.
*
* "notify-end-input-transaction" (optional)
* This is notified when the callback is detached from
* nsITextInputProcessor. I.e., the TextInputProcessor lost the rights
* to input text and needs to call .beginInputTransaction() before next
* input.
*
* "notify-focus" (optional)
* This is notified when an editable editor gets focus and Gecko starts
* to observe changes in the content. E.g., selection changes.
* IME shouldn't change DOM tree, focus nor something when this is notified.
*
* "notify-blur" (optional)
* This is notified when an editable editor loses focus and Gecko stops
* observing the changes in the content.
*
* "notify-text-change" (optional)
* This is notified when text in the focused editor is modified.
* Some attributes below are available to retrieve the detail.
* IME shouldn't change DOM tree, focus nor something when this is notified.
* Note that when there is no chance to notify you of some text changes
* safely, this represents all changes as a change.
*
* "notify-selection-change" (optional)
* This is notified when selection in the focused editor is changed.
* Some attributes below are available to retrieve the detail.
* IME shouldn't change DOM tree, focus nor something when this is notified.
* Note that when there was no chance to notify you of this safely, this
* represents the latest selection change.
*
* "notify-position-change" (optional)
* This is notified when layout is changed in the editor or the window
* is moved.
* IME shouldn't change DOM tree, focus nor something when this is notified.
* Note that when there was no chance to notify you of this safely, this
* represents the latest layout change.
*/
readonly attribute ACString type;
/**
* Be careful, line breakers in the editor are treated as native line
* breakers. I.e., on Windows, a line breaker is "\r\n" (CRLF). On the
* others, it is "\n" (LF). If you want TextInputProcessor to treat line
* breakers on Windows as XP line breakers (LF), please file a bug with
* the reason why you need the behavior.
*/
/**
* This attribute has a valid value when type is "notify-text-change" or
* "notify-selection-change".
* This is offset of the start of modified text range if type is
* "notify-text-change". Or offset of start of selection if type is
* "notify-selection-change".
*/
readonly attribute unsigned long offset;
/**
* This attribute has a valid value when type is "notify-selection-change".
* This is selected text. I.e., the length is selected length and
* it's empty if the selection is collapsed.
*/
readonly attribute AString text;
/**
* This attribute has a valid value when type is "notify-selection-change".
* This is set to true when the selection is collapsed. Otherwise, false.
*/
readonly attribute boolean collapsed;
/**
* This attribute has a valid value when type is "notify-selection-change".
* This is selected length. I.e., if this is 0, collapsed is set to true.
*/
readonly attribute uint32_t length;
/**
* This attribute has a valid value when type is "notify-selection-change".
* When selection is created from latter point to former point, this is
* set to true. Otherwise, false.
* I.e., if this is true, offset + length is the anchor of selection.
*/
readonly attribute boolean reversed;
/**
* This attribute has a valid value when type is "notify-selection-change".
* This indicates the start of the selection's writing mode.
* The value can be "horizontal-tb", "vertical-rl" or "vertical-lr".
*/
readonly attribute ACString writingMode;
/**
* This attribute has a valid value when type is "notify-selection-change".
* If the selection change was caused by composition, this is set to true.
* Otherwise, false.
*/
readonly attribute boolean causedByComposition;
/**
* This attribute has a valid value when type is "notify-selection-change".
* If the selection change was caused by selection event, this is set to true.
* Otherwise, false.
*/
readonly attribute boolean causedBySelectionEvent;
/**
* This attribute has a valid value when type is "notify-selection-change".
* If the selection change occurred during composition, this is set to true.
* Otherwise, false.
*/
readonly attribute boolean occurredDuringComposition;
/**
* This attribute has a valid value when type is "notify-text-change".
* This is removed text length by the change(s). If this is empty, new text
* was just inserted. Otherwise, the text is replaced with new text.
*/
readonly attribute unsigned long removedLength;
/**
* This attribute has a valid value when type is "notify-text-change".
* This is added text length by the change(s). If this is empty, old text
* was just deleted. Otherwise, the text replaces the old text.
*/
readonly attribute unsigned long addedLength;
/**
* This attribute has a valid value when type is "notify-text-change".
* If the text change(s) was caused only by composition, this is set to true.
* Otherwise, false. I.e., if one of text changes are caused by JS or
* modifying without composition, this is set to false.
*/
readonly attribute boolean causedOnlyByComposition;
/**
* This attribute has a valid value when type is "notify-text-change".
* If at least one text change not caused by composition occurred during
* composition, this is set to true. Otherwise, false.
* Note that this is set to false when new change is caused by neither
* composition nor occurred during composition because it's outdated for
* new composition.
* In other words, when text changes not caused by composition occurred
* during composition and it may cause committing composition, this is
* set to true.
*/
readonly attribute boolean includingChangesDuringComposition;
/**
* This attribute has a valid value when type is "notify-text-change".
* If at least one text change occurred when there was no composition, this
* is set to true. Otherwise, false.
*/
readonly attribute boolean includingChangesWithoutComposition;
};
/**
* nsITextInputProcessorCallback is a callback interface for JS to implement
* IME. IME implemented by JS can implement onNotify() function and must send
* it to nsITextInputProcessor at initializing. Then, onNotify() will be
* called with nsITextInputProcessorNotification instance.
* The reason why onNotify() uses string simply is that if we will support
* other notifications such as text changes and selection changes, we need to
* notify IME of some other information. Then, only changing
* nsITextInputProcessorNotification interface is better for compatibility.
*/
[scriptable, function, uuid(23d5f242-adb5-46f1-8766-90d1bf0383df)]
interface nsITextInputProcessorCallback : nsISupports
{
/**
* When Gecko notifies IME of something or requests something to IME,
* this is called.
*
* @param aTextInputProcessor Reference to the nsITextInputProcessor service
* which is the original receiver of the request
* or notification.
* @param aNotification Stores type of notifications and additional
* information.
* @return Return true if it succeeded or does nothing.
* Otherwise, return false.
*
* Example #1 The simplest implementation of nsITextInputProcessorCallback is:
*
* function simpleCallback(aTIP, aNotification)
* {
* try {
* switch (aNotification.type) {
* case "request-to-commit":
* aTIP.commitComposition();
* break;
* case "request-to-cancel":
* aTIP.cancelComposition();
* break;
* }
* } catch (e) {
* return false;
* }
* return true;
* }
*
* var TIP = Components.classes["@mozilla.org/text-input-processor;1"].
* createInstance(Components.interfaces.nsITextInputProcessor);
* if (!TIP.init(window, simpleCallback)) {
* return;
* }
*/
boolean onNotify(in nsITextInputProcessor aTextInputProcessor,
in nsITextInputProcessorNotification aNotification);
};