gecko-dev/nsprpub/config/config.mk

247 строки
6.2 KiB
Makefile

#! gmake
#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is the Netscape Portable Runtime (NSPR).
#
# The Initial Developer of the Original Code is Netscape
# Communications Corporation. Portions created by Netscape are
# Copyright (C) 1998-2000 Netscape Communications Corporation. All
# Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the
# terms of the GNU General Public License Version 2 or later (the
# "GPL"), in which case the provisions of the GPL are applicable
# instead of those above. If you wish to allow use of your
# version of this file only under the terms of the GPL and not to
# allow others to use your version of this file under the MPL,
# indicate your decision by deleting the provisions above and
# replace them with the notice and other provisions required by
# the GPL. If you do not delete the provisions above, a recipient
# may use your version of this file under either the MPL or the
# GPL.
#
# Configuration information for building in the NSPR source module
# Define an include-at-most-once-flag
NSPR_CONFIG_MK = 1
#
# The variable definitions in this file are inputs to NSPR's
# build system. This file, if present, is included at the
# beginning of config.mk.
#
# For example:
#
# BUILD_OPT=1
# USE_PTHREADS=1
# NS_USE_GCC=
#
ifndef topsrcdir
topsrcdir=$(MOD_DEPTH)
endif
ifndef srcdir
srcdir=.
endif
ifdef USE_AUTOCONF
NFSPWD = $(MOD_DEPTH)/config/nfspwd
CFLAGS = $(CC_ONLY_FLAGS) $(OPTIMIZER) $(OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
CCCFLAGS = $(CCC_ONLY_FLAGS) $(OPTIMIZER) $(OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
# For purify
NOMD_CFLAGS = $(CC_ONLY_FLAGS) $(OPTIMIZER) $(NOMD_OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
NOMD_CCFLAGS = $(CCC_ONLY_FLAGS) $(OPTIMIZER) $(NOMD_OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
LDFLAGS = $(OS_LDFLAGS)
define MAKE_OBJDIR
if test ! -d $(@D); then rm -rf $(@D); $(NSINSTALL) -D $(@D); fi
endef
LINK_DLL = $(LD) $(OS_DLLFLAGS) $(DLLFLAGS)
ifeq ($(NSDISTMODE),copy)
# copy files, but preserve source mtime
INSTALL = $(NSINSTALL) -t
else
ifeq ($(NSDISTMODE),absolute_symlink)
# install using absolute symbolic links
INSTALL = $(NSINSTALL) -L `$(NFSPWD)`
else
# install using relative symbolic links
INSTALL = $(NSINSTALL) -R
endif
endif
ifdef BUILD_DEBUG_GC
DEFINES += -DDEBUG_GC
endif
GARBAGE += $(DEPENDENCIES) core $(wildcard core.[0-9]*)
ifdef USE_AUTOCONF
DIST_GARBAGE += Makefile
endif
DEFINES += -DFORCE_PR_LOG
ifeq ($(_PR_NO_CLOCK_TIMER),1)
DEFINES += -D_PR_NO_CLOCK_TIMER
endif
ifeq ($(USE_PTHREADS), 1)
DEFINES += -D_PR_PTHREADS -UHAVE_CVAR_BUILT_ON_SEM
endif
ifeq ($(PTHREADS_USER), 1)
DEFINES += -DPTHREADS_USER -UHAVE_CVAR_BUILT_ON_SEM
endif
ifeq ($(USE_IPV6),1)
DEFINES += -D_PR_INET6
endif
else # ! USE_AUTOCONF
ifndef NSPR_MY_CONFIG_MK
NSPR_MY_CONFIG_MK = $(MOD_DEPTH)/config/my_config.mk
endif
#
# The variable definitions in this file are used to
# override variable values set by NSPR's build system.
# This file, if present, is included at the end of config.mk.
#
# For example:
#
# DIST=/usr/local/nspr
#
ifndef NSPR_MY_OVERRIDES_MK
NSPR_MY_OVERRIDES_MK = $(MOD_DEPTH)/config/my_overrides.mk
endif
-include $(NSPR_MY_CONFIG_MK)
include $(MOD_DEPTH)/config/module.df
include $(MOD_DEPTH)/config/arch.mk
ifndef NSDEPTH
NSDEPTH = $(MOD_DEPTH)/..
endif
#
# Default command macros; can be overridden in <arch>.mk.
#
# XXX FIXME: I removed CCF and LINKEXE.
AS = $(CC)
ASFLAGS = $(CFLAGS)
PURIFY = purify $(PURIFYOPTIONS)
LINK_DLL = $(LINK) $(OS_DLLFLAGS) $(DLLFLAGS)
NFSPWD = $(MOD_DEPTH)/config/nfspwd
CFLAGS = $(CC_ONLY_FLAGS) $(OPTIMIZER) $(OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
CCCFLAGS = $(CCC_ONLY_FLAGS) $(OPTIMIZER) $(OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
# For purify
NOMD_CFLAGS = $(CC_ONLY_FLAGS) $(OPTIMIZER) $(NOMD_OS_CFLAGS)\
$(XP_DEFINE) $(DEFINES) $(INCLUDES) $(XCFLAGS)
include $(MOD_DEPTH)/config/$(OS_TARGET).mk
# Figure out where the binary code lives.
BUILD = $(OBJDIR_NAME)
OBJDIR = $(OBJDIR_NAME)
DIST = $(NSDEPTH)/dist/$(OBJDIR_NAME)
ifeq ($(MOZ_BITS),16)
MOZ_INCL = $(NSDEPTH)/dist/public/win16
MOZ_DIST = $(NSDEPTH)/dist/WIN16D_D.OBJ
endif
# if not using autoconf, set these values accordingly
prefix = $(DIST)
exec_prefix = $(prefix)
bindir = $(prefix)/bin
includedir = $(prefix)/include
libdir = $(prefix)/lib
VPATH = $(OBJDIR)
DEPENDENCIES = $(OBJDIR)/.md
ifdef BUILD_DEBUG_GC
DEFINES += -DDEBUG_GC
endif
GARBAGE += $(DEPENDENCIES) core $(wildcard core.[0-9]*)
####################################################################
#
# The NSPR-specific configuration
#
####################################################################
OS_CFLAGS += -DFORCE_PR_LOG
ifeq ($(_PR_NO_CLOCK_TIMER),1)
OS_CFLAGS += -D_PR_NO_CLOCK_TIMER
endif
ifeq ($(USE_PTHREADS), 1)
OS_CFLAGS += -D_PR_PTHREADS -UHAVE_CVAR_BUILT_ON_SEM
endif
ifeq ($(PTHREADS_USER), 1)
OS_CFLAGS += -DPTHREADS_USER -UHAVE_CVAR_BUILT_ON_SEM
endif
ifeq ($(USE_IPV6),1)
OS_CFLAGS += -D_PR_INET6
endif
ifdef GC_LEAK_DETECTOR
OS_CFLAGS += -DGC_LEAK_DETECTOR
endif
####################################################################
#
# Configuration for the release process
#
####################################################################
MDIST = /m/dist
ifeq ($(OS_ARCH),WINNT)
MDIST = //helium/dist
MDIST_DOS = $(subst /,\\,$(MDIST))
endif
# RELEASE_DIR is ns/dist/<module name>
RELEASE_DIR = $(NSDEPTH)/dist/release/$(MOD_NAME)
RELEASE_INCLUDE_DIR = $(RELEASE_DIR)/$(BUILD_NUMBER)/$(OBJDIR_NAME)/include
RELEASE_BIN_DIR = $(RELEASE_DIR)/$(BUILD_NUMBER)/$(OBJDIR_NAME)/bin
RELEASE_LIB_DIR = $(RELEASE_DIR)/$(BUILD_NUMBER)/$(OBJDIR_NAME)/lib
-include $(NSPR_MY_OVERRIDES_MK)
endif # USE_AUTOCONF