gecko-dev/tools/rb/fix-linux-stack.pl

250 строки
8.2 KiB
Perl
Executable File

#!/usr/bin/perl
# vim:sw=4:ts=4:et:
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
# $Id: fix-linux-stack.pl,v 1.16 2008/05/05 21:51:11 dbaron%dbaron.org Exp $
#
# This script uses addr2line (part of binutils) to process the output of
# nsTraceRefcnt's Linux stack walking code. This is useful for two
# things:
# (1) Getting line number information out of
# |nsTraceRefcntImpl::WalkTheStack|'s output in debug builds.
# (2) Getting function names out of |nsTraceRefcntImpl::WalkTheStack|'s
# output on optimized builds (where it mostly prints UNKNOWN
# because only a handful of symbols are exported from component
# libraries).
#
# Use the script by piping output containing stacks (such as raw stacks
# or make-tree.pl balance trees) through this script.
use strict;
use IPC::Open2;
use File::Basename;
# XXX Hard-coded to gdb defaults (works on Fedora).
my $global_debug_dir = '/usr/lib/debug';
# addr2line wants offsets relative to the base address for shared
# libraries, but it wants addresses including the base address offset
# for executables. This function returns the appropriate address
# adjustment to add to an offset within file. See bug 230336.
my %address_adjustments;
sub address_adjustment($) {
my ($file) = @_;
unless (exists $address_adjustments{$file}) {
# find out if it's an executable (as opposed to a shared library)
my $elftype;
open(ELFHDR, '-|', 'readelf', '-h', $file);
while (<ELFHDR>) {
if (/^\s*Type:\s+(\S+)/) {
$elftype = $1;
last;
}
}
close(ELFHDR);
# If it's an executable, make adjustment the base address.
# Otherwise, leave it zero.
my $adjustment = 0;
if ($elftype eq 'EXEC') {
open(ELFSECS, '-|', 'readelf', '-S', $file);
while (<ELFSECS>) {
if (/^\s*\[\s*\d+\]\s+\.text\s+\w+\s+(\w+)\s+(\w+)\s+/) {
# Subtract the .text section's offset within the
# file from its base address.
$adjustment = hex($1) - hex($2);
last;
}
}
close(ELFSECS);
}
$address_adjustments{$file} = $adjustment;
}
return $address_adjustments{$file};
}
# Files sometimes contain a link to a separate object file that contains
# the debug sections of the binary, removed so that a smaller file can
# be shipped, but kept separately so that it can be obtained by those
# who want it.
# See http://sources.redhat.com/gdb/current/onlinedocs/gdb_16.html#SEC154
# for documentation of debugging information in separate files.
# On Fedora distributions, these files can be obtained by installing
# *-debuginfo RPM packages.
sub separate_debug_file_for($) {
my ($file) = @_;
# We can read the .gnu_debuglink section using either of:
# objdump -s --section=.gnu_debuglink $file
# readelf -x .gnu_debuglink $file
# Since readelf prints things backwards on little-endian platforms
# for some versions only (backwards on Fedora Core 6, forwards on
# Fedora 7), use objdump.
# See if there's a .gnu_debuglink section
my $have_debuglink = 0;
open(ELFSECS, '-|', 'readelf', '-S', $file);
while (<ELFSECS>) {
if (/^\s*\[\s*\d+\]\s+\.gnu_debuglink\s+\w+\s+(\w+)\s+(\w+)\s+/) {
$have_debuglink = 1;
last;
}
}
close(ELFSECS);
return '' unless ($have_debuglink);
# Determine the endianness of the shared library.
my $endian = '';
open(ELFHDR, '-|', 'readelf', '-h', $file);
while (<ELFHDR>) {
if (/^\s*Data:\s+.*(little|big) endian.*$/) {
$endian = $1;
last;
}
}
close(ELFHDR);
if ($endian ne 'little' && $endian ne 'big') {
print STDERR "Warning: could not determine endianness of $file.\n";
return '';
}
# Read the debuglink section as an array of words, in hexidecimal.
open(DEBUGLINK, '-|', 'objdump', '-s', '--section=.gnu_debuglink', $file);
my @words;
while (<DEBUGLINK>) {
if ($_ =~ /^ [0-9a-f]* ([0-9a-f ]{8}) ([0-9a-f ]{8}) ([0-9a-f ]{8}) ([0-9a-f ]{8}).*/) {
push @words, $1, $2, $3, $4;
}
}
close(DEBUGLINK);
while (@words[$#words] eq ' ') {
pop @words;
}
if ($#words < 1) {
print STDERR "Warning: .gnu_debuglink section in $file too short.\n";
return '';
}
my @chars;
while ($#words >= 0) {
my $w = shift @words;
if ($w =~ /^([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})$/) {
push @chars, $1, $2, $3, $4;
} else {
print STDERR "Warning: malformed objdump output for $file.\n";
return '';
}
}
my @hash_bytes = map(hex, @chars[$#chars - 3 .. $#chars]);
$#chars -= 4;
my $hash;
if ($endian eq 'little') {
$hash = ($hash_bytes[3] << 24) | ($hash_bytes[2] << 16) | ($hash_bytes[1] << 8) | $hash_bytes[0];
} else {
$hash = ($hash_bytes[0] << 24) | ($hash_bytes[1] << 16) | ($hash_bytes[2] << 8) | $hash_bytes[3];
}
# The string ends with a null-terminator and then 0 to three bytes
# of padding to fill the current 32-bit unit. (This padding is
# usually null bytes, but I've seen null-null-H, on Ubuntu x86_64.)
my $terminator = 1;
while ($chars[$terminator] ne '00') {
if ($terminator == $#chars) {
print STDERR "Warning: missing null terminator in " .
".gnu_debuglink section of $file.\n";
return '';
}
++$terminator;
}
if ($#chars - $terminator > 3) {
print STDERR "Warning: Excess padding in .gnu_debuglink section " .
"of $file.\n";
return '';
}
$#chars = $terminator - 1;
my $basename = join('', map { chr(hex($_)) } @chars);
# Now $basename and $hash represent the information in the
# .gnu_debuglink section.
#printf STDERR "%x: %s\n", $hash, $basename;
my @possible_results = (
dirname($file) . $basename,
dirname($file) . '.debug/' . $basename,
$global_debug_dir . dirname($file) . '/' . $basename
);
foreach my $result (@possible_results) {
if (-f $result) {
# XXX We should check the hash.
return $result;
}
}
return '';
}
# Return a reference to a hash whose {read} and {write} entries are a
# bidirectional pipe to an addr2line process that gives symbol
# information for a file.
my %pipes;
sub addr2line_pipe($) {
my ($file) = @_;
my $pipe;
unless (exists $pipes{$file}) {
my $debug_file = separate_debug_file_for($file);
$debug_file = $file if ($debug_file eq '');
my $pid = open2($pipe->{read}, $pipe->{write},
'/usr/bin/addr2line', '-C', '-f', '-e', $debug_file);
$pipes{$file} = $pipe;
} else {
$pipe = $pipes{$file};
}
return $pipe;
}
# Ignore SIGPIPE as a workaround for addr2line crashes in some situations.
$SIG{PIPE} = 'IGNORE';
select STDOUT; $| = 1; # make STDOUT unbuffered
while (<>) {
my $line = $_;
if ($line =~ /^([ \|0-9-]*)(.*) ?\[([^ ]*) \+(0x[0-9A-F]{1,8})\](.*)$/) {
my $before = $1; # allow preservation of balance trees
my $badsymbol = $2;
my $file = $3;
my $address = hex($4);
my $after = $5; # allow preservation of counts
if (-f $file) {
my $pipe = addr2line_pipe($file);
$address += address_adjustment($file);
my $out = $pipe->{write};
my $in = $pipe->{read};
printf {$out} "0x%X\n", $address;
chomp(my $symbol = <$in>);
chomp(my $fileandline = <$in>);
if (!$symbol || $symbol eq '??') { $symbol = $badsymbol; }
if (!$fileandline || $fileandline eq '??:0') {
$fileandline = $file;
}
print "$before$symbol ($fileandline)$after\n";
} else {
print STDERR "Warning: File \"$file\" does not exist.\n";
print $line;
}
} else {
print $line;
}
}