mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/build/package/wince/make_wince_cab.py

457 строки
16 KiB
Python
Исходник Ответственный История

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla build system.
#
# The Initial Developer of the Original Code is
# Mozilla Foundation.
# Portions created by the Initial Developer are Copyright (C) 2007
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# John Wolfe <wolfe@lobo.us>
# Vladimir Vukicevic <vladimir@pobox.com>
# Alex Pakhotin <alexp@mozilla.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
################################################################
#
# make_wince_cab.py --- Given a directory, walk it and make an
# installer based upon the contents of that directory
#
# Usage:
# python make_wince_cab.py [-setupdll] [-s] [-faststart] [CABWIZ_PATH] SOURCE_DIR PROGRAM_NAME CAB_FINAL_NAME
#
# Walk through the relative directory SOURCE_DIR, parsing filenames
# Checks for duplicate filenames and renames where needed
# Then builds a WinMobile INF file based upon results
#
# Each directory in SOURCE_DIR may have a file named
# 'install-exceptions', which lists files in SOURCE_DIR that
# need not be placed into an installation CAB file. The
# 'install-exceptions' file itself is always ignored.
#
# Blank lines and '#' comments in the 'install-exceptions' file are
# ignored.
#
# ARGS:
# -setupdll - Make a small additional CAB including Setup.dll.
# This is to add Fennec to the system list of installed applications
# available in Settings - System - Remove Programs.
#
# -s - Don't pass /compress to cabwiz (generate CAB compatible with Windows CE)
#
# -faststart - Add FastStart shortcut
#
# CABWIZ_PATH - If specified, will use this cabwiz.exe executable. Otherwise, will attempt
# to find one using $VSINSTALLDIR.
#
# SOURCE_DIR - sub-directory which contains the target program
# NOTE: It is assumed that the application name is SOURCE_DIR.exe
# EXAMPLE: source_dir=fennec, there should be a fennec/fennec.exe application
#
# PROGRAM_NAME - Name of the program to place inside the INF file
#
# CAB_FINAL_NAME - actual final name for the produced CAB file
#
# EXAMPLE OF COMMAND LINE:
# python make_wince_cab.py /c/Program\ Files/Microsoft\ Visual\ Studio\ 9.0/SmartDevices/SDK/SDKTools/cabwiz.exe dist/fennec Fennec fennec-0.11.en-US.wince-arm.cab
#
# NOTE: In our example, "fennec" is the directory [source_name]
# "fennec.exe" is the application [$(source_name).exe], and
# "Fennec" is the shortcut name [program_name]
################################################################
import sys
import os
from os.path import join
from subprocess import call, STDOUT
import fnmatch
import string
import shutil
CompressFlag = "/compress"
FaststartFlag = 0
MakeSetupDllCab = 0
class FileEntry:
def __init__(self, dirpath, dircount, filename, filecount, actual_filename):
self.dirpath = dirpath
self.dircount = dircount
self.filename = filename
self.filecount = filecount
self.actual_filename = actual_filename
class DirEntry:
def __init__(self, dirpath, dircount, filecount):
self.dirpath = dirpath
self.dircount = dircount
self.filecount = filecount
# Ignore detritus left lying around by editing tools.
ignored_patterns = ['*~', '.#*', '#*#', '*.orig', '*.rej']
file_entry_count = 0
file_entries = []
fcount = 0
fnames = {}
directories = {}
files_in_directory = []
# Return the contents of FILENAME, a 'install-exceptions' file, as
# a dictionary whose keys are exactly the list of filenames, along
# with the basename of FILENAME itself. If FILENAME does not exist,
# return the empty dictionary.
def read_exceptions(filename):
exceptions = set()
if os.path.exists(filename):
f = file(filename)
for line in f:
line = line.strip()
if line and line[0] != '#':
exceptions.add(line)
exceptions.add( os.path.basename(filename) )
f.close()
return exceptions
# Sorts two items based first upon directory count (index of
# directory in list of directories), then upon filename. A way of
# getting a list sorted into directories, and then alphabetically by
# filename within each directory.
def sort_dircount_then_filename(item1, item2):
# First Compare dirpaths
if item1.dircount != item2.dircount:
return cmp(item1.dircount, item2.dircount)
# Next compare filenames
next_result = cmp(item1.filename, item2.filename)
if next_result != 0:
return next_result
# Lastly, compare filecounts
return cmp(item1.filecount, item2.filecount)
def handle_duplicate_filename(dirpath, filename, filecount):
if filecount == 1:
return filename
file_parts = os.path.splitext(filename)
new_filename = "%s_%d%s" % (file_parts[0], filecount, file_parts[1])
old_relative_filename = join(dirpath, filename)
new_relative_filename = join(dirpath, new_filename)
shutil.copyfile(old_relative_filename, new_relative_filename)
return new_filename
def add_new_entry(dirpath, dircount, filename, filecount):
global file_entries
global file_entry_count
actual_filename = handle_duplicate_filename(dirpath, filename, filecount)
file_entries.append( FileEntry(dirpath, dircount, filename, filecount, actual_filename) )
file_entry_count += 1
def walk_tree(start_dir, ignore):
global fcount
global fnames
global directories
global files_in_directory
dircount = 0;
files_in_directory = [0]
for (dirpath, dirnames, filenames) in os.walk(start_dir):
exceptions = read_exceptions(join(dirpath, 'install-exceptions'))
dircount += 1
directories[dirpath] = DirEntry(dirpath, dircount, len(filenames))
if len(filenames) < 1:
print "WARNING: No files in directory [%s]" % dirpath
for filename in filenames:
if len(exceptions) > 0 and filename in exceptions:
continue
if any(fnmatch.fnmatch(filename, p) for p in ignore):
continue
filecount = 1
if filename in fnames:
filecount = fnames[filename] + 1
fnames[filename] = filecount
add_new_entry(dirpath, dircount, filename, filecount)
def output_inf_file_header(f, program_name):
f.write("""; Duplicated Filenames ==> One of the two files
; needs renaming before packaging up the CAB
;
; Technique: Rename the second directory's file to XXXX_1 prior to starting the CABWIZ,
; then take care of the name in the File.xxxxx section
[Version]
Signature = "$Windows NT$" ; required as-is
Provider = "Mozilla" ; maximum of 30 characters, full app name will be \"<Provider> <AppName>\"
CESignature = "$Windows CE$" ; required as-is
[CEStrings]
AppName = "%s" ; maximum of 40 characters, full app name will be \"<Provider> <AppName>\"\n""" % program_name)
f.write("InstallDir = %CE1%\\%AppName% ; Program Files\Fennec\n\n")
def output_sourcedisksnames_section(f, dirs):
f.write("[SourceDisksNames] ; directory that holds the application's files\n")
for dir in dirs:
f.write("""%d = , "%s",,%s\n""" % (directories[dir].dircount, dir, dir))
f.write(" \n")
def output_sourcedisksfiles_section(f):
f.write("[SourceDisksFiles] ; list of files to be included in .cab\n")
for entry in sorted(file_entries, sort_dircount_then_filename):
f.write("%s=%d\n" % (entry.actual_filename, entry.dircount))
f.write("\n")
def output_defaultinstall_section(f, dirs):
copyfileslist = ""
copyfilesrawlist=[]
for dir in dirs:
if directories[dir].filecount < 1:
continue
copyfilesrawlist.append( "Files.%s" % '.'.join( dir.split('\\') ) )
prefix = ", "
copyfileslist = ','.join(copyfilesrawlist)
f.write("""[DefaultInstall] ; operations to be completed during install
CopyFiles = %s
AddReg = RegData
CEShortcuts = Shortcuts
\n""" % copyfileslist)
def output_destinationdirs_section(f, dirs):
f.write("[DestinationDirs] ; default destination directories for each operation section\n")
for dir in dirs:
dir_split = dir.split('\\')
mod_dir_string = '.'.join(dir_split)
if len(dir_split) > 1:
dir_minus_top_level = '\\'.join(dir_split[1:])
else:
dir_minus_top_level = ""
if dir_minus_top_level:
dir_minus_top_level = "\\%s" % dir_minus_top_level
if directories[dir].filecount < 1:
f.write(";Files.%s = 0, %%InstallDir%%%s ; NO FILES IN THIS DIRECTORY\n" % (mod_dir_string, dir_minus_top_level))
else:
f.write("Files.%s = 0, %%InstallDir%%%s\n" % (mod_dir_string, dir_minus_top_level))
f.write("Shortcuts = 0, %CE11% ; \Windows\Start Menu\Programs\n\n")
def output_directory_sections(f, dirs):
for dir in dirs:
if directories[dir].filecount < 1:
f.write(";[Files.%s]\n;===NO FILES===\n" % '.'.join( dir.split('\\') ))
else:
f.write("[Files.%s]\n" % '.'.join( dir.split('\\') ))
for entry in file_entries:
if entry.dirpath == dir:
f.write("\"%s\",%s\n" % (entry.filename, entry.actual_filename))
f.write("\n")
def output_registry_section(f):
f.write("""[RegData] ; registry key list
HKCU,Software\%AppName%,MajorVersion,0x00010001,1
HKCU,Software\%AppName%,MinorVersion,0x00010001,0
\n""")
def output_shortcuts_section(f, app_name):
f.write("[Shortcuts]\n")
f.write("%%AppName%%,0,%s,%%CE11%%\n" % app_name)
if FaststartFlag:
f.write("%%AppName%%faststart,0,%sfaststart.exe,%%CE4%%\n" % os.path.splitext(app_name)[0]);
def output_inf_file(program_name, app_name):
global files_in_directory
inf_name = "%s.inf" % program_name
f = open(inf_name, 'w')
output_inf_file_header(f, program_name)
dirs = sorted(directories)
output_sourcedisksnames_section(f, dirs)
output_sourcedisksfiles_section(f)
output_defaultinstall_section(f, dirs)
output_destinationdirs_section(f, dirs)
output_directory_sections(f, dirs)
output_registry_section(f)
output_shortcuts_section(f, app_name)
f.close()
def output_setup_dll_inf_file(source_dir, program_name, app_name):
inf_name = "%s.inf" % program_name
f = open(inf_name, 'w')
f.write("""; Additional CAB to create Fennec entry in the installed programs list
[Version]
Signature = "$Windows NT$" ; required as-is
Provider = "Mozilla" ; maximum of 30 characters, full app name will be \"<Provider> <AppName>\"
CESignature = "$Windows CE$" ; required as-is
[CEStrings]
AppName = "%s" ; maximum of 40 characters, full app name will be \"<Provider> <AppName>\"\n""" % program_name)
f.write("InstallDir = %CE1%\\%AppName% ; Program Files\Fennec\n\n")
f.write("[SourceDisksNames] ; directory that holds the application's files\n")
f.write('1 = , "%s",,%s\n\n' % (source_dir, source_dir))
f.write("[SourceDisksFiles] ; list of files to be included in .cab\n")
f.write("Setup.dll = 1\n\n")
f.write("""[DefaultInstall] ; operations to be completed during install
CopyFiles = Files.%s
AddReg = RegData
CESetupDLL = "Setup.dll"
\n""" % program_name)
f.write("[DestinationDirs] ; default destination directories for each operation section\n")
f.write("Files.%s = 0, %%InstallDir%%\n\n" % program_name)
f.write("""[Files.%s]
;No files to copy
[RegData]
;No registry entries
""" % program_name)
f.close()
def make_cab_file(cabwiz_path, program_name, cab_final_name):
make_cab_command = "\"%s\" %s %s.inf" % (cabwiz_path, CompressFlag, program_name)
print "INFORMATION: Executing command to make %s CAB file (only works on BASH)" % program_name
print " [%s]" % make_cab_command
sys.stdout.flush()
success = call([cabwiz_path, "%s.inf" % program_name, CompressFlag],
stdout=open("NUL:","w"), stderr=STDOUT)
if not os.path.isfile("%s.CAB" % program_name):
print """***************************************************************************
ERROR: CAB FILE NOT CREATED.
You can try running the command by hand:
%s
----
NOTE: If you see an error like this:
Error: File XXXXXXXXXX.inf contains DirIDs, which are not supported
--
this may mean that your PYTHON is outputting Windows files WITHOUT CR-LF
line endings. Please verify that your INF file has CR-LF line endings.
***************************************************************************""" % make_cab_command
sys.exit(2)
print "INFORMATION: Executing command to move %s.CAB to %s" % (program_name, cab_final_name)
sys.stdout.flush()
shutil.move("%s.CAB" % program_name, cab_final_name)
def purge_copied_files():
for entry in file_entries:
if entry.filename != entry.actual_filename:
new_relative_filename = join(entry.dirpath, entry.actual_filename)
os.remove(new_relative_filename)
def main():
args = sys.argv
if len(args) < 4 or len(args) > 7:
print >> sys.stderr, "Usage: %s [-setupdll] [-s] [-faststart] [CABWIZ_PATH] SOURCE_DIR PROGRAM_NAME CAB_FINAL_NAME" % args[0]
print >> sys.stderr, "Example: %s /c/Program\ Files/Microsoft\ Visual\ Studio\ 9.0/ fennec Fennec fennec-0.11.en-US.wince-arm.cab" % args[0]
sys.exit(1)
args = args[1:]
if args[0] == "-setupdll":
global MakeSetupDllCab
MakeSetupDllCab = 1
args = args[1:]
if args[0] == "-s":
global CompressFlag
CompressFlag = ""
args = args[1:]
if args[0] == "-faststart":
global FaststartFlag
FaststartFlag = 1
args = args[1:]
cabwiz_path = None
if len(args) == 4:
cabwiz_path = args[0]
args = args[1:]
else:
if "VSINSTALLDIR" in os.environ:
cabwiz_path = os.path.join(os.environ["VSINSTALLDIR"], "SmartDevices", "SDK", "SDKTools", "cabwiz.exe")
source_dir = args[0]
program_name = args[1]
app_name = "%s.exe" % source_dir
cab_final_name = args[2]
if cabwiz_path is None or not os.path.isfile(cabwiz_path):
print """***************************************************************************
ERROR: CABWIZ_PATH is not a valid file, or cabwiz couldn't be found!
EXITING...
***************************************************************************"""
sys.exit(2)
if MakeSetupDllCab:
output_setup_dll_inf_file(source_dir, program_name, app_name)
sys.stdout.flush()
make_cab_file(cabwiz_path, program_name, cab_final_name)
os.remove("%s/setup.dll" % source_dir)
else:
walk_tree(source_dir, ignored_patterns)
sys.stdout.flush()
output_inf_file(program_name, app_name)
sys.stdout.flush()
make_cab_file(cabwiz_path, program_name, cab_final_name)
purge_copied_files()
# run main if run directly
if __name__ == "__main__":
main()
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку