gecko-dev/xpcom/ds/nsExpirationTracker.h

322 строки
13 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Mozilla.
* Portions created by the Initial Developer are Copyright (C) 2007
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* robert@ocallahan.org
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef NSEXPIRATIONTRACKER_H_
#define NSEXPIRATIONTRACKER_H_
#include "prlog.h"
#include "nsTArray.h"
#include "nsITimer.h"
#include "nsCOMPtr.h"
#include "nsComponentManagerUtils.h"
/**
* Data used to track the expiration state of an object. We promise that this
* is 32 bits so that objects that includes this as a field can pad and align
* efficiently.
*/
struct nsExpirationState {
enum { NOT_TRACKED = (1U << 4) - 1,
MAX_INDEX_IN_GENERATION = (1U << 28) - 1 };
nsExpirationState() : mGeneration(NOT_TRACKED) {}
PRBool IsTracked() { return mGeneration != NOT_TRACKED; }
/**
* The generation that this object belongs to, or NOT_TRACKED.
*/
PRUint32 mGeneration:4;
PRUint32 mIndexInGeneration:28;
};
/**
* nsExpirationTracker can track the lifetimes and usage of a large number of
* objects, and send a notification some window of time after a live object was
* last used. This is very useful when you manage a large number of objects
* and want to flush some after they haven't been used for a while.
* nsExpirationTracker is designed to be very space and time efficient.
*
* The type parameter T is the object type that we will track pointers to. T
* must include an accessible method GetExpirationState() that returns a
* pointer to an nsExpirationState associated with the object (preferably,
* stored in a field of the object).
*
* The parameter K is the number of generations that will be used. Increasing
* the number of generations narrows the window within which we promise
* to fire notifications, at a slight increase in space cost for the tracker.
* We require 2 <= K <= nsExpirationState::NOT_TRACKED (currently 15).
*
* To use this class, you need to inherit from it and override the
* NotifyExpired() method.
*
* The approach is to track objects in K generations. When an object is accessed
* it moves from its current generation to the newest generation. Generations
* are stored in a cyclic array; when a timer interrupt fires, we advance
* the current generation pointer to effectively age all objects very efficiently.
* By storing information in each object about its generation and index within its
* generation array, we make removal of objects from a generation very cheap.
*
* Future work:
* -- Add a method to change the timer period?
*/
template <class T, PRUint32 K> class nsExpirationTracker {
public:
/**
* Initialize the tracker.
* @param aTimerPeriod the timer period in milliseconds. The guarantees
* provided by the tracker are defined in terms of this period. If the
* period is zero, then we don't use a timer and rely on someone calling
* AgeOneGeneration explicitly.
*/
nsExpirationTracker(PRUint32 aTimerPeriod)
: mTimerPeriod(aTimerPeriod), mNewestGeneration(0),
mInAgeOneGeneration(PR_FALSE) {
PR_STATIC_ASSERT(K >= 2 && K <= nsExpirationState::NOT_TRACKED);
}
~nsExpirationTracker() {
if (mTimer) {
mTimer->Cancel();
}
}
/**
* Add an object to be tracked. It must not already be tracked. It will
* be added to the newest generation, i.e., as if it was just used.
* @return an error on out-of-memory
*/
nsresult AddObject(T* aObj) {
nsExpirationState* state = aObj->GetExpirationState();
NS_ASSERTION(!state->IsTracked(), "Tried to add an object that's already tracked");
nsTArray<T*>& generation = mGenerations[mNewestGeneration];
PRUint32 index = generation.Length();
if (index > nsExpirationState::MAX_INDEX_IN_GENERATION) {
NS_WARNING("More than 256M elements tracked, this is probably a problem");
return NS_ERROR_OUT_OF_MEMORY;
}
if (index == 0) {
// We might need to start the timer
nsresult rv = CheckStartTimer();
if (NS_FAILED(rv))
return rv;
}
if (!generation.AppendElement(aObj))
return NS_ERROR_OUT_OF_MEMORY;
state->mGeneration = mNewestGeneration;
state->mIndexInGeneration = index;
return NS_OK;
}
/**
* Remove an object from the tracker. It must currently be tracked.
*/
void RemoveObject(T* aObj) {
nsExpirationState* state = aObj->GetExpirationState();
NS_ASSERTION(state->IsTracked(), "Tried to remove an object that's not tracked");
nsTArray<T*>& generation = mGenerations[state->mGeneration];
PRUint32 index = state->mIndexInGeneration;
NS_ASSERTION(generation.Length() > index &&
generation[index] == aObj, "Object is lying about its index");
// Move the last object to fill the hole created by removing aObj
PRUint32 last = generation.Length() - 1;
T* lastObj = generation[last];
generation[index] = lastObj;
lastObj->GetExpirationState()->mIndexInGeneration = index;
generation.RemoveElementAt(last);
state->mGeneration = nsExpirationState::NOT_TRACKED;
// We do not check whether we need to stop the timer here. The timer
// will check that itself next time it fires. Checking here would not
// be efficient since we'd need to track all generations. Also we could
// thrash by incessantly creating and destroying timers if someone
// kept adding and removing an object from the tracker.
}
/**
* Notify that an object has been used.
* @return an error if we lost the object from the tracker...
*/
nsresult MarkUsed(T* aObj) {
nsExpirationState* state = aObj->GetExpirationState();
if (mNewestGeneration == state->mGeneration)
return NS_OK;
RemoveObject(aObj);
return AddObject(aObj);
}
/**
* The timer calls this, but it can also be manually called if you want
* to age objects "artifically". This can result in calls to NotifyExpired.
*/
void AgeOneGeneration() {
if (mInAgeOneGeneration) {
NS_WARNING("Can't reenter AgeOneGeneration from NotifyExpired");
return;
}
mInAgeOneGeneration = PR_TRUE;
PRUint32 reapGeneration =
mNewestGeneration > 0 ? mNewestGeneration - 1 : K - 1;
nsTArray<T*>& generation = mGenerations[reapGeneration];
// The following is rather tricky. We have to cope with objects being
// removed from this generation either because of a call to RemoveObject
// (or indirectly via MarkUsed) inside NotifyExpired. Fortunately no
// objects can be added to this generation because it's not the newest
// generation. We depend on the fact that RemoveObject can only cause
// the indexes of objects in this generation to *decrease*, not increase.
// So if we start from the end and work our way backwards we are guaranteed
// to see each object at least once.
PRUint32 index = generation.Length();
for (;;) {
// Objects could have been removed so index could be outside
// the array
index = PR_MIN(index, generation.Length());
if (index == 0)
break;
--index;
NotifyExpired(generation[index]);
}
// Any leftover objects from reapGeneration just end up in the new
// newest-generation. This is bad form, though, so warn if there are any.
if (!generation.IsEmpty()) {
NS_WARNING("Expired objects were not removed or marked used");
}
// Free excess memory used by the generation array, since we probably
// just removed most or all of its elements.
generation.Compact();
mNewestGeneration = reapGeneration;
mInAgeOneGeneration = PR_FALSE;
}
/**
* This just calls AgeOneGeneration K times. Under normal circumstances this
* will result in all objects getting NotifyExpired called on them, but
* if NotifyExpired itself marks some objects as used, then those objects
* might not expire. This would be a good thing to call if we get into
* a critically-low memory situation.
*/
void AgeAllGenerations() {
PRUint32 i;
for (i = 0; i < K; ++i) {
AgeOneGeneration();
}
}
class Iterator {
private:
nsExpirationTracker<T,K>* mTracker;
PRUint32 mGeneration;
PRUint32 mIndex;
public:
Iterator(nsExpirationTracker<T,K>* aTracker)
: mTracker(aTracker), mGeneration(0), mIndex(0) {}
T* Next() {
while (mGeneration < K) {
nsTArray<T*>* generation = &mTracker->mGenerations[mGeneration];
if (mIndex < generation->Length()) {
++mIndex;
return (*generation)[mIndex - 1];
}
++mGeneration;
}
return nsnull;
}
};
friend class Iterator;
protected:
/**
* This must be overridden to catch notifications. It is called whenever
* we detect that an object has not been used for at least (K-1)*mTimerPeriod
* seconds. If timer events are not delayed, it will be called within
* roughly K*mTimerPeriod seconds after the last use. (Unless AgeOneGeneration
* or AgeAllGenerations have been called to accelerate the aging process.)
*
* NOTE: These bounds ignore delays in timer firings due to actual work being
* performed by the browser. We use a slack timer so there is always at least
* mTimerPeriod milliseconds between firings, which gives us (K-1)*mTimerPeriod
* as a pretty solid lower bound. The upper bound is rather loose, however.
* If the maximum amount by which any given timer firing is delayed is D, then
* the upper bound before NotifyExpired is called is K*(mTimerPeriod + D).
*
* The NotifyExpired call is expected to remove the object from the tracker,
* but it need not. The object (or other objects) could be "resurrected"
* by calling MarkUsed() on them, or they might just not be removed.
* Any objects left over that have not been resurrected or removed
* are placed in the new newest-generation, but this is considered "bad form"
* and should be avoided (we'll issue a warning). (This recycling counts
* as "a use" for the purposes of the expiry guarantee above...)
*
* For robustness and simplicity, we allow objects to be notified more than
* once here in the same timer tick.
*/
virtual void NotifyExpired(T* aObj) = 0;
private:
nsTArray<T*> mGenerations[K];
nsCOMPtr<nsITimer> mTimer;
PRUint32 mTimerPeriod;
PRUint32 mNewestGeneration;
PRPackedBool mInAgeOneGeneration;
static void TimerCallback(nsITimer* aTimer, void* aThis) {
nsExpirationTracker* tracker = static_cast<nsExpirationTracker*>(aThis);
tracker->AgeOneGeneration();
// Cancel the timer if we have no objects to track
PRUint32 i;
for (i = 0; i < K; ++i) {
if (!tracker->mGenerations[i].IsEmpty())
return;
}
tracker->mTimer->Cancel();
tracker->mTimer = nsnull;
}
nsresult CheckStartTimer() {
if (mTimer || !mTimerPeriod)
return NS_OK;
mTimer = do_CreateInstance("@mozilla.org/timer;1");
if (!mTimer)
return NS_ERROR_OUT_OF_MEMORY;
mTimer->InitWithFuncCallback(TimerCallback, this, mTimerPeriod,
nsITimer::TYPE_REPEATING_SLACK);
return NS_OK;
}
};
#endif /*NSEXPIRATIONTRACKER_H_*/