gecko-dev/suite/browser/viewPartialSource.js

485 строки
17 KiB
JavaScript

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org view-source front-end.
*
* The Initial Developer of the Original Code is mozilla.org.
* Portions created by the Initial Developer are Copyright (C) 2002
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Roger B. Sidje <rbs@maths.uq.edu.au> (Original Author)
* Steve Swanson <steve.swanson@mackichan.com>
* Doron Rosenberg <doronr@naboonline.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
var gDebug = 0;
var gLineCount = 0;
var gStartTargetLine = 0;
var gEndTargetLine = 0;
var gTargetNode = null;
var gEntityConverter = null;
var gWrapLongLines = false;
const gViewSourceCSS = 'resource:///res/viewsource.css';
const NS_XHTML = 'http://www.w3.org/1999/xhtml';
// These are markers used to delimit the selection during processing. They
// are removed from the final rendering, but we pick space-like characters for
// safety (and futhermore, these are known to be mapped to a 0-length string
// in transliterate.properties). It is okay to set start=end, we use findNext()
// U+200B ZERO WIDTH SPACE
const MARK_SELECTION_START = '\u200B\u200B\u200B\u200B\u200B';
const MARK_SELECTION_END = '\u200B\u200B\u200B\u200B\u200B';
function onLoadViewPartialSource()
{
// check the view_source.wrap_long_lines pref and set the menuitem's checked attribute accordingly
if (gPrefs) {
try {
var wraplonglinesPrefValue = gPrefs.getBoolPref('view_source.wrap_long_lines');
if (wraplonglinesPrefValue) {
document.getElementById('menu_wrapLongLines').setAttribute('checked', 'true');
gWrapLongLines = true;
}
} catch (e) { }
}
// disable menu items that don't work since the selection is munged and
// the editor doesn't work for MathML
document.getElementById('cmd_savePage').setAttribute('disabled', 'true');
document.getElementById('cmd_editPage').setAttribute('disabled', 'true');
if (window.arguments[3] == 'selection')
viewPartialSourceForSelection(window.arguments[2]);
else
viewPartialSourceForFragment(window.arguments[2], window.arguments[3]);
window._content.focus();
}
////////////////////////////////////////////////////////////////////////////////
// view-source of a selection with the special effect of remapping the selection
// to the underlying view-source output
function viewPartialSourceForSelection(selection)
{
var range = selection.getRangeAt(0);
var ancestorContainer = range.commonAncestorContainer;
var doc = ancestorContainer.ownerDocument;
var startContainer = range.startContainer;
var endContainer = range.endContainer;
var startOffset = range.startOffset;
var endOffset = range.endOffset;
// let the ancestor be an element
if (ancestorContainer.nodeType == Node.TEXT_NODE ||
ancestorContainer.nodeType == Node.CDATA_SECTION_NODE)
ancestorContainer = ancestorContainer.parentNode;
// each path is a "child sequence" (a.k.a. "tumbler") that
// descends from the ancestor down to the boundary point
var startPath = getPath(ancestorContainer, startContainer);
var endPath = getPath(ancestorContainer, endContainer);
// clone the fragment of interest and reset everything to be relative to it
ancestorContainer = ancestorContainer.cloneNode(true);
startContainer = ancestorContainer;
endContainer = ancestorContainer;
var i;
for (i = startPath ? startPath.length-1 : -1; i >= 0; i--) {
startContainer = startContainer.childNodes.item(startPath[i]);
}
for (i = endPath ? endPath.length-1 : -1; i >= 0; i--) {
endContainer = endContainer.childNodes.item(endPath[i]);
}
// add special markers to record the extent of the selection
// note: |startOffset| and |endOffset| are interpreted either as
// offsets in the text data or as child indices (see the Range spec)
// (here, munging the end point first to keep the start point safe...)
var tmpNode;
if (endContainer.nodeType == Node.TEXT_NODE ||
endContainer.nodeType == Node.CDATA_SECTION_NODE) {
// do some extra tweaks to try to avoid the view-source output to look like
// ...<tag>]... or ...]</tag>... (where ']' marks the end of the selection).
// To get a neat output, the idea here is to remap the end point from:
// 1. ...<tag>]... to ...]<tag>...
// 2. ...]</tag>... to ...</tag>]...
if ((endOffset > 0 && endOffset < endContainer.data.length-1) ||
!endContainer.parentNode || !endContainer.parentNode.parentNode)
endContainer.insertData(endOffset, MARK_SELECTION_END);
else {
tmpNode = doc.createTextNode(MARK_SELECTION_END);
endContainer = endContainer.parentNode;
if (endOffset == 0)
endContainer.parentNode.insertBefore(tmpNode, endContainer);
else
endContainer.parentNode.insertBefore(tmpNode, endContainer.nextSibling);
}
}
else {
tmpNode = doc.createTextNode(MARK_SELECTION_END);
endContainer.insertBefore(tmpNode, endContainer.childNodes.item(endOffset));
}
if (startContainer.nodeType == Node.TEXT_NODE ||
startContainer.nodeType == Node.CDATA_SECTION_NODE) {
// do some extra tweaks to try to avoid the view-source output to look like
// ...<tag>[... or ...[</tag>... (where '[' marks the start of the selection).
// To get a neat output, the idea here is to remap the start point from:
// 1. ...<tag>[... to ...[<tag>...
// 2. ...[</tag>... to ...</tag>[...
if ((startOffset > 0 && startOffset < startContainer.data.length-1) ||
!startContainer.parentNode || !startContainer.parentNode.parentNode)
startContainer.insertData(startOffset, MARK_SELECTION_START);
else {
tmpNode = doc.createTextNode(MARK_SELECTION_START);
startContainer = startContainer.parentNode;
if (startOffset == 0)
startContainer.parentNode.insertBefore(tmpNode, startContainer);
else
startContainer.parentNode.insertBefore(tmpNode, startContainer.nextSibling);
}
}
else {
tmpNode = doc.createTextNode(MARK_SELECTION_START);
startContainer.insertBefore(tmpNode, startContainer.childNodes.item(startOffset));
}
// now extract and display the syntax highlighted source
tmpNode = doc.createElementNS(NS_XHTML, 'div');
tmpNode.appendChild(ancestorContainer);
// the load is aynchronous and so we will wait until the view-source DOM is done
// before drawing the selection.
window.document.getElementById("appcontent").addEventListener("load", drawSelection, true);
// all our content is held by the data:URI and URIs are internally stored as utf-8 (see nsIURI.idl)
var loadFlags = Components.interfaces.nsIWebNavigation.LOAD_FLAGS_BYPASS_CACHE;
getBrowser().webNavigation
.loadURI("view-source:data:text/html;charset=utf-8," + escape(tmpNode.innerHTML),
loadFlags, null, null, null);
}
////////////////////////////////////////////////////////////////////////////////
// helper to get a path like FIXptr, but with an array instead of the "tumbler" notation
// see FIXptr: http://lists.w3.org/Archives/Public/www-xml-linking-comments/2001AprJun/att-0074/01-NOTE-FIXptr-20010425.htm
function getPath(ancestor, node)
{
var n = node;
var p = n.parentNode;
if (n == ancestor || !p)
return null;
var path = new Array();
if (!path)
return null;
do {
for (var i = 0; i < p.childNodes.length; i++) {
if (p.childNodes.item(i) == n) {
path.push(i);
break;
}
}
n = p;
p = n.parentNode;
} while (n != ancestor && p);
return path;
}
////////////////////////////////////////////////////////////////////////////////
// using special markers left in the serialized source, this helper makes the
// underlying markup of the selected fragement to automatically appear as selected
// on the inflated view-source DOM
function drawSelection()
{
// find the special selection markers that we added earlier, and
// draw the selection between the two...
var findService = null;
try {
// get the find service which stores the global find state
findService = Components.classes["@mozilla.org/find/find_service;1"]
.getService(Components.interfaces.nsIFindService);
} catch(e) { }
if (!findService)
return;
// cache the current global find state
var matchCase = findService.matchCase;
var entireWord = findService.entireWord;
var wrapFind = findService.wrapFind;
var findBackwards = findService.findBackwards;
var searchString = findService.searchString;
var replaceString = findService.replaceString;
// setup our find instance
var findInst = getBrowser().webBrowserFind;
findInst.matchCase = true;
findInst.entireWord = false;
findInst.wrapFind = false;
findInst.findBackwards = false;
// ...lookup the start mark
findInst.searchString = MARK_SELECTION_START;
var startLength = MARK_SELECTION_START.length;
findInst.findNext();
var contentWindow = getBrowser().contentDocument.defaultView;
var selection = contentWindow.getSelection();
var range = selection.getRangeAt(0);
var startContainer = range.startContainer;
var startOffset = range.startOffset;
// ...lookup the end mark
findInst.searchString = MARK_SELECTION_END;
var endLength = MARK_SELECTION_END.length;
findInst.findNext();
var endContainer = selection.anchorNode;
var endOffset = selection.anchorOffset;
// reset the selection that find has left
selection.removeAllRanges();
// delete the special markers now...
endContainer.deleteData(endOffset, endLength);
startContainer.deleteData(startOffset, startLength);
if (startContainer == endContainer)
endOffset -= startLength; // has shrunk if on same text node...
range.setEnd(endContainer, endOffset);
// show the selection and scroll it into view
selection.addRange(range);
// the default behavior of the selection is to scroll at the end of
// the selection, whereas in this situation, it is more user-friendly
// to scroll at the beginning. So we override the default behavior here
try {
getBrowser().docShell
.QueryInterface(Components.interfaces.nsIInterfaceRequestor)
.getInterface(Components.interfaces.nsISelectionDisplay)
.QueryInterface(Components.interfaces.nsISelectionController)
.scrollSelectionIntoView(Components.interfaces.nsISelectionController.SELECTION_NORMAL,
Components.interfaces.nsISelectionController.SELECTION_ANCHOR_REGION,
true);
}
catch(e) { }
// restore the current find state
findService.matchCase = matchCase;
findService.entireWord = entireWord;
findService.wrapFind = wrapFind;
findService.findBackwards = findBackwards;
findService.searchString = searchString;
findService.replaceString = replaceString;
findInst.matchCase = matchCase;
findInst.entireWord = entireWord;
findInst.wrapFind = wrapFind;
findInst.findBackwards = findBackwards;
findInst.searchString = searchString;
}
////////////////////////////////////////////////////////////////////////////////
// special handler for markups such as MathML where reformatting the output is
// helpful
function viewPartialSourceForFragment(node, context)
{
gTargetNode = node;
if (gTargetNode && gTargetNode.nodeType == Node.TEXT_NODE)
gTargetNode = gTargetNode.parentNode;
// walk up the tree to the top-level element (e.g., <math>, <svg>)
var topTag;
if (context == 'mathml')
topTag = 'math';
else
throw 'not reached';
var topNode = gTargetNode;
while (topNode && topNode.localName != topTag)
topNode = topNode.parentNode;
if (!topNode)
return;
// serialize (note: the main window overrides the title set here)
var wrapClass = gWrapLongLines ? ' class="wrap"' : '';
var source =
'<html>'
+ '<head><title>Mozilla</title>'
+ '<link rel="stylesheet" type="text/css" href="' + gViewSourceCSS + '">'
+ '<style type="text/css">'
+ '#target { border: dashed 1px; background-color: lightyellow; }'
+ '</style>'
+ '</head>'
+ '<body id="viewsource"' + wrapClass
+ ' onload="document.getElementById(\'target\').scrollIntoView(true)">'
+ '<pre>'
+ getOuterMarkup(topNode, 0)
+ '</pre></body></html>'
; // end
// display
var doc = getBrowser().contentDocument;
doc.open("text/html", "replace");
doc.write(source);
doc.close();
}
////////////////////////////////////////////////////////////////////////////////
function getInnerMarkup(node, indent) {
var str = '';
for (var i = 0; i < node.childNodes.length; i++) {
str += getOuterMarkup(node.childNodes.item(i), indent);
}
return str;
}
////////////////////////////////////////////////////////////////////////////////
function getOuterMarkup(node, indent) {
var newline = '';
var padding = '';
var str = '';
if (node == gTargetNode) {
gStartTargetLine = gLineCount;
str += '</pre><pre id="target">';
}
switch (node.nodeType) {
case Node.ELEMENT_NODE: // Element
// to avoid the wide gap problem, '\n' is not emitted on the first
// line and the lines before & after the <pre id="target">...</pre>
if (gLineCount > 0 &&
gLineCount != gStartTargetLine &&
gLineCount != gEndTargetLine) {
newline = '\n';
}
gLineCount++;
if (gDebug) {
newline += gLineCount;
}
for (var k = 0; k < indent; k++) {
padding += ' ';
}
str += newline + padding
+ '&lt;<span class="start-tag">' + node.nodeName + '</span>';
for (var i = 0; i < node.attributes.length; i++) {
var attr = node.attributes.item(i);
if (!gDebug && attr.nodeName.match(/^[-_]moz/)) {
continue;
}
str += ' <span class="attribute-name">'
+ attr.nodeName
+ '</span>=<span class="attribute-value">"'
+ unicodeTOentity(attr.nodeValue)
+ '"</span>';
}
if (!node.hasChildNodes()) {
str += '/&gt;';
}
else {
str += '&gt;';
var oldLine = gLineCount;
str += getInnerMarkup(node, indent + 2);
if (oldLine == gLineCount) {
newline = '';
padding = '';
}
else {
newline = (gLineCount == gEndTargetLine) ? '' : '\n';
gLineCount++;
if (gDebug) {
newline += gLineCount;
}
}
str += newline + padding
+ '&lt;/<span class="end-tag">' + node.nodeName + '</span>&gt;';
}
break;
case Node.TEXT_NODE: // Text
var tmp = node.nodeValue;
tmp = tmp.replace(/(\n|\r|\t)+/g, " ");
tmp = tmp.replace(/^ +/, "");
tmp = tmp.replace(/ +$/, "");
if (tmp.length != 0) {
str += '<span class="text">' + unicodeTOentity(tmp) + '</span>';
}
break;
default:
break;
}
if (node == gTargetNode) {
gEndTargetLine = gLineCount;
str += '</pre><pre>';
}
return str;
}
////////////////////////////////////////////////////////////////////////////////
function unicodeTOentity(text)
{
const charTable = {
'&': '&amp;<span class="entity">amp;</span>',
'<': '&amp;<span class="entity">lt;</span>',
'>': '&amp;<span class="entity">gt;</span>',
'"': '&amp;<span class="entity">quot;</span>'
};
function charTableLookup(letter) {
return charTable[letter];
}
function convertEntity(letter) {
try {
var unichar = gEntityConverter.ConvertToEntity(letter, entityVersion);
var entity = unichar.substring(1); // extract '&'
return '&amp;<span class="entity">' + entity + '</span>';
} catch (ex) {
return letter;
}
}
if (!gEntityConverter) {
try {
gEntityConverter =
Components.classes["@mozilla.org/intl/entityconverter;1"]
.createInstance(Components.interfaces.nsIEntityConverter);
} catch(e) { }
}
const entityVersion = Components.interfaces.nsIEntityConverter.entityW3C;
var str = text;
// replace chars in our charTable
str = str.replace(/[<>&"]/g, charTableLookup);
// replace chars > 0x7f via nsIEntityConverter
str = str.replace(/[^\0-\u007f]/g, convertEntity);
return str;
}