mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/dom/base/Selection.h

1017 строки
38 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this file,
* You can obtain one at http://mozilla.org/MPL/2.0/. */
#ifndef mozilla_Selection_h__
#define mozilla_Selection_h__
#include "mozilla/dom/StyledRange.h"
#include "mozilla/AutoRestore.h"
#include "mozilla/EventForwards.h"
#include "mozilla/PresShellForwards.h"
#include "mozilla/RangeBoundary.h"
#include "mozilla/SelectionChangeEventDispatcher.h"
#include "mozilla/UniquePtr.h"
#include "mozilla/WeakPtr.h"
#include "nsDirection.h"
#include "nsISelectionController.h"
#include "nsISelectionListener.h"
#include "nsRange.h"
#include "nsTArrayForwardDeclare.h"
#include "nsThreadUtils.h"
#include "nsWeakReference.h"
#include "nsWrapperCache.h"
struct CachedOffsetForFrame;
class AutoScroller;
class nsIFrame;
class nsFrameSelection;
class nsPIDOMWindowOuter;
struct SelectionDetails;
struct SelectionCustomColors;
class nsCopySupport;
class nsHTMLCopyEncoder;
class nsPresContext;
struct nsPoint;
struct nsRect;
namespace mozilla {
class AccessibleCaretEventHub;
class ErrorResult;
class HTMLEditor;
class PostContentIterator;
enum class TableSelectionMode : uint32_t;
struct AutoPrepareFocusRange;
namespace dom {
class DocGroup;
} // namespace dom
} // namespace mozilla
namespace mozilla {
namespace dom {
// Note, the ownership of mozilla::dom::Selection depends on which way the
// object is created. When nsFrameSelection has created Selection,
// addreffing/releasing the Selection object is aggregated to nsFrameSelection.
// Otherwise normal addref/release is used. This ensures that nsFrameSelection
// is never deleted before its Selections.
class Selection final : public nsSupportsWeakReference,
public nsWrapperCache,
public SupportsWeakPtr {
protected:
virtual ~Selection();
public:
/**
* @param aFrameSelection can be nullptr.
*/
explicit Selection(SelectionType aSelectionType,
nsFrameSelection* aFrameSelection);
NS_DECL_CYCLE_COLLECTING_ISUPPORTS
NS_DECL_CYCLE_COLLECTION_SCRIPT_HOLDER_CLASS(Selection)
// match this up with EndbatchChanges. will stop ui updates while multiple
// selection methods are called
void StartBatchChanges();
// match this up with StartBatchChanges
void EndBatchChanges(int16_t aReason = nsISelectionListener::NO_REASON);
/**
* NotifyAutoCopy() starts to notify AutoCopyListener of selection changes.
*/
void NotifyAutoCopy() {
MOZ_ASSERT(mSelectionType == SelectionType::eNormal);
mNotifyAutoCopy = true;
}
/**
* MaybeNotifyAccessibleCaretEventHub() starts to notify
* AccessibleCaretEventHub of selection change if aPresShell has it.
*/
void MaybeNotifyAccessibleCaretEventHub(PresShell* aPresShell);
/**
* StopNotifyingAccessibleCaretEventHub() stops notifying
* AccessibleCaretEventHub of selection change.
*/
void StopNotifyingAccessibleCaretEventHub();
/**
* EnableSelectionChangeEvent() starts to notify
* SelectionChangeEventDispatcher of selection change to dispatch a
* selectionchange event at every selection change.
*/
void EnableSelectionChangeEvent() {
if (!mSelectionChangeEventDispatcher) {
mSelectionChangeEventDispatcher = new SelectionChangeEventDispatcher();
}
}
// Required for WebIDL bindings, see
// https://developer.mozilla.org/en-US/docs/Mozilla/WebIDL_bindings#Adding_WebIDL_bindings_to_a_class.
Document* GetParentObject() const;
DocGroup* GetDocGroup() const;
// utility methods for scrolling the selection into view
nsPresContext* GetPresContext() const;
PresShell* GetPresShell() const;
nsFrameSelection* GetFrameSelection() const { return mFrameSelection; }
// Returns a rect containing the selection region, and frame that that
// position is relative to. For SELECTION_ANCHOR_REGION or
// SELECTION_FOCUS_REGION the rect is a zero-width rectangle. For
// SELECTION_WHOLE_SELECTION the rect contains both the anchor and focus
// region rects.
nsIFrame* GetSelectionAnchorGeometry(SelectionRegion aRegion, nsRect* aRect);
// Returns the position of the region (SELECTION_ANCHOR_REGION or
// SELECTION_FOCUS_REGION only), and frame that that position is relative to.
// The 'position' is a zero-width rectangle.
nsIFrame* GetSelectionEndPointGeometry(SelectionRegion aRegion,
nsRect* aRect);
nsresult PostScrollSelectionIntoViewEvent(SelectionRegion aRegion,
int32_t aFlags,
ScrollAxis aVertical,
ScrollAxis aHorizontal);
enum {
SCROLL_SYNCHRONOUS = 1 << 1,
SCROLL_FIRST_ANCESTOR_ONLY = 1 << 2,
SCROLL_DO_FLUSH =
1 << 3, // only matters if SCROLL_SYNCHRONOUS is passed too
SCROLL_OVERFLOW_HIDDEN = 1 << 5,
SCROLL_FOR_CARET_MOVE = 1 << 6
};
// If aFlags doesn't contain SCROLL_SYNCHRONOUS, then we'll flush when
// the scroll event fires so we make sure to scroll to the right place.
// Otherwise, if SCROLL_DO_FLUSH is also in aFlags, then this method will
// flush layout and you MUST hold a strong ref on 'this' for the duration
// of this call. This might destroy arbitrary layout objects.
MOZ_CAN_RUN_SCRIPT nsresult
ScrollIntoView(SelectionRegion aRegion, ScrollAxis aVertical = ScrollAxis(),
ScrollAxis aHorizontal = ScrollAxis(), int32_t aFlags = 0);
private:
static bool IsUserSelectionCollapsed(
const nsRange& aRange, nsTArray<RefPtr<nsRange>>& aTempRangesToAdd);
/**
* https://w3c.github.io/selection-api/#selectstart-event.
*/
enum class DispatchSelectstartEvent {
No,
Maybe,
};
/**
* See `AddRangesForSelectableNodes`.
*/
[[nodiscard]] MOZ_CAN_RUN_SCRIPT nsresult AddRangesForUserSelectableNodes(
nsRange* aRange, int32_t* aOutIndex,
const DispatchSelectstartEvent aDispatchSelectstartEvent);
/**
* Adds aRange to this Selection. If mUserInitiated is true,
* then aRange is first scanned for -moz-user-select:none nodes and split up
* into multiple ranges to exclude those before adding the resulting ranges
* to this Selection.
*
* @param aOutIndex points to the range last added, if at least one was added.
* If aRange is already contained, it points to the range
* containing it. -1 if mStyledRanges.mRanges was empty and
* no range was added.
*/
[[nodiscard]] MOZ_CAN_RUN_SCRIPT nsresult AddRangesForSelectableNodes(
nsRange* aRange, int32_t* aOutIndex,
DispatchSelectstartEvent aDispatchSelectstartEvent);
public:
nsresult RemoveCollapsedRanges();
void Clear(nsPresContext* aPresContext);
MOZ_CAN_RUN_SCRIPT nsresult CollapseInLimiter(nsINode* aContainer,
uint32_t aOffset) {
if (!aContainer) {
return NS_ERROR_INVALID_ARG;
}
return CollapseInLimiter(RawRangeBoundary(aContainer, aOffset));
}
MOZ_CAN_RUN_SCRIPT nsresult
CollapseInLimiter(const RawRangeBoundary& aPoint) {
ErrorResult result;
CollapseInLimiter(aPoint, result);
return result.StealNSResult();
}
MOZ_CAN_RUN_SCRIPT void CollapseInLimiter(const RawRangeBoundary& aPoint,
ErrorResult& aRv) {
CollapseInternal(InLimiter::eYes, aPoint, aRv);
}
MOZ_CAN_RUN_SCRIPT nsresult Extend(nsINode* aContainer, int32_t aOffset);
/**
* See mStyledRanges.mRanges.
*/
nsRange* GetRangeAt(int32_t aIndex) const;
// Get the anchor-to-focus range if we don't care which end is
// anchor and which end is focus.
const nsRange* GetAnchorFocusRange() const { return mAnchorFocusRange; }
nsDirection GetDirection() const { return mDirection; }
void SetDirection(nsDirection aDir) { mDirection = aDir; }
MOZ_CAN_RUN_SCRIPT nsresult SetAnchorFocusToRange(nsRange* aRange);
MOZ_CAN_RUN_SCRIPT void ReplaceAnchorFocusRange(nsRange* aRange);
void AdjustAnchorFocusForMultiRange(nsDirection aDirection);
nsIFrame* GetPrimaryFrameForAnchorNode() const;
nsIFrame* GetPrimaryFrameForFocusNode(bool aVisual,
int32_t* aOffsetUsed = nullptr) const;
UniquePtr<SelectionDetails> LookUpSelection(
nsIContent* aContent, int32_t aContentOffset, int32_t aContentLength,
UniquePtr<SelectionDetails> aDetailsHead, SelectionType aSelectionType,
bool aSlowCheck);
NS_IMETHOD Repaint(nsPresContext* aPresContext);
MOZ_CAN_RUN_SCRIPT
nsresult StartAutoScrollTimer(nsIFrame* aFrame, const nsPoint& aPoint,
uint32_t aDelayInMs);
nsresult StopAutoScrollTimer();
JSObject* WrapObject(JSContext* aCx,
JS::Handle<JSObject*> aGivenProto) override;
// WebIDL methods
nsINode* GetAnchorNode(CallerType aCallerType = CallerType::System) const {
const RangeBoundary& anchor = AnchorRef();
nsINode* anchorNode = anchor.IsSet() ? anchor.Container() : nullptr;
if (!anchorNode || aCallerType == CallerType::System ||
!anchorNode->ChromeOnlyAccess()) {
return anchorNode;
}
// anchor is nsIContent as ChromeOnlyAccess is nsIContent-only
return anchorNode->AsContent()->FindFirstNonChromeOnlyAccessContent();
}
uint32_t AnchorOffset(CallerType aCallerType = CallerType::System) const {
const RangeBoundary& anchor = AnchorRef();
if (aCallerType != CallerType::System && anchor.IsSet() &&
anchor.Container()->ChromeOnlyAccess()) {
return 0;
}
const Maybe<uint32_t> offset =
anchor.Offset(RangeBoundary::OffsetFilter::kValidOffsets);
return offset ? *offset : 0;
}
nsINode* GetFocusNode(CallerType aCallerType = CallerType::System) const {
const RangeBoundary& focus = FocusRef();
nsINode* focusNode = focus.IsSet() ? focus.Container() : nullptr;
if (!focusNode || aCallerType == CallerType::System ||
!focusNode->ChromeOnlyAccess()) {
return focusNode;
}
// focus is nsIContent as ChromeOnlyAccess is nsIContent-only
return focusNode->AsContent()->FindFirstNonChromeOnlyAccessContent();
}
uint32_t FocusOffset(CallerType aCallerType = CallerType::System) const {
const RangeBoundary& focus = FocusRef();
if (aCallerType != CallerType::System && focus.IsSet() &&
focus.Container()->ChromeOnlyAccess()) {
return 0;
}
const Maybe<uint32_t> offset =
focus.Offset(RangeBoundary::OffsetFilter::kValidOffsets);
return offset ? *offset : 0;
}
nsIContent* GetChildAtAnchorOffset() {
const RangeBoundary& anchor = AnchorRef();
return anchor.IsSet() ? anchor.GetChildAtOffset() : nullptr;
}
nsIContent* GetChildAtFocusOffset() {
const RangeBoundary& focus = FocusRef();
return focus.IsSet() ? focus.GetChildAtOffset() : nullptr;
}
const RangeBoundary& AnchorRef() const;
const RangeBoundary& FocusRef() const;
/*
* IsCollapsed -- is the whole selection just one point, or unset?
*/
bool IsCollapsed() const {
uint32_t cnt = mStyledRanges.Length();
if (cnt == 0) {
return true;
}
if (cnt != 1) {
return false;
}
return mStyledRanges.mRanges[0].mRange->Collapsed();
}
// *JS() methods are mapped to Selection.*().
// They may move focus only when the range represents normal selection.
// These methods shouldn't be used by non-JS callers.
MOZ_CAN_RUN_SCRIPT void CollapseJS(nsINode* aContainer, uint32_t aOffset,
mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void CollapseToStartJS(mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void CollapseToEndJS(mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void ExtendJS(nsINode& aContainer, uint32_t aOffset,
mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void SelectAllChildrenJS(nsINode& aNode,
mozilla::ErrorResult& aRv);
/**
* Deletes this selection from document the nodes belong to.
* Only if this has `SelectionType::eNormal`.
*/
MOZ_CAN_RUN_SCRIPT void DeleteFromDocument(mozilla::ErrorResult& aRv);
uint32_t RangeCount() const { return mStyledRanges.Length(); }
void GetType(nsAString& aOutType) const;
nsRange* GetRangeAt(uint32_t aIndex, mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void AddRangeJS(nsRange& aRange,
mozilla::ErrorResult& aRv);
/**
* Callers need to keep `aRange` alive.
*/
MOZ_CAN_RUN_SCRIPT void RemoveRangeAndUnselectFramesAndNotifyListeners(
nsRange& aRange, mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void RemoveAllRanges(mozilla::ErrorResult& aRv);
/**
* Whether Stringify should flush layout or not.
*/
enum class FlushFrames { No, Yes };
MOZ_CAN_RUN_SCRIPT
void Stringify(nsAString& aResult, FlushFrames = FlushFrames::Yes);
/**
* Indicates whether the node is part of the selection. If partlyContained
* is true, the function returns true when some part of the node
* is part of the selection. If partlyContained is false, the
* function only returns true when the entire node is part of the selection.
*/
bool ContainsNode(nsINode& aNode, bool aPartlyContained,
mozilla::ErrorResult& aRv);
/**
* Check to see if the given point is contained within the selection area. In
* particular, this iterates through all the rects that make up the selection,
* not just the bounding box, and checks to see if the given point is
* contained in any one of them.
* @param aPoint The point to check, relative to the root frame.
*/
bool ContainsPoint(const nsPoint& aPoint);
/**
* Modifies the selection. Note that the parameters are case-insensitive.
*
* @param alter can be one of { "move", "extend" }
* - "move" collapses the selection to the end of the selection and
* applies the movement direction/granularity to the collapsed
* selection.
* - "extend" leaves the start of the selection unchanged, and applies
* movement direction/granularity to the end of the selection.
* @param direction can be one of { "forward", "backward", "left", "right" }
* @param granularity can be one of { "character", "word",
* "line", "lineboundary" }
*
* @throws NS_ERROR_NOT_IMPLEMENTED if the granularity is "sentence",
* "sentenceboundary", "paragraph", "paragraphboundary", or
* "documentboundary". Throws NS_ERROR_INVALID_ARG if alter, direction,
* or granularity has an unrecognized value.
*/
MOZ_CAN_RUN_SCRIPT void Modify(const nsAString& aAlter,
const nsAString& aDirection,
const nsAString& aGranularity,
mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT
void SetBaseAndExtentJS(nsINode& aAnchorNode, uint32_t aAnchorOffset,
nsINode& aFocusNode, uint32_t aFocusOffset,
mozilla::ErrorResult& aRv);
bool GetInterlinePosition(mozilla::ErrorResult& aRv);
void SetInterlinePosition(bool aValue, mozilla::ErrorResult& aRv);
Nullable<int16_t> GetCaretBidiLevel(mozilla::ErrorResult& aRv) const;
void SetCaretBidiLevel(const Nullable<int16_t>& aCaretBidiLevel,
mozilla::ErrorResult& aRv);
void ToStringWithFormat(const nsAString& aFormatType, uint32_t aFlags,
int32_t aWrapColumn, nsAString& aReturn,
mozilla::ErrorResult& aRv);
void AddSelectionListener(nsISelectionListener* aListener);
void RemoveSelectionListener(nsISelectionListener* aListener);
RawSelectionType RawType() const {
return ToRawSelectionType(mSelectionType);
}
SelectionType Type() const { return mSelectionType; }
/**
* See documentation of `GetRangesForInterval` in Selection.webidl.
*
* @param aReturn references, not copies, of the internal ranges.
*/
void GetRangesForInterval(nsINode& aBeginNode, int32_t aBeginOffset,
nsINode& aEndNode, int32_t aEndOffset,
bool aAllowAdjacent,
nsTArray<RefPtr<nsRange>>& aReturn,
mozilla::ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void ScrollIntoView(int16_t aRegion, bool aIsSynchronous,
WhereToScroll aVPercent,
WhereToScroll aHPercent,
mozilla::ErrorResult& aRv);
void SetColors(const nsAString& aForeColor, const nsAString& aBackColor,
const nsAString& aAltForeColor, const nsAString& aAltBackColor,
mozilla::ErrorResult& aRv);
void ResetColors(mozilla::ErrorResult& aRv);
/**
* Non-JS callers should use the following
* collapse/collapseToStart/extend/etc methods, instead of the *JS
* versions that bindings call.
*/
/**
* Collapses the selection to a single point, at the specified offset
* in the given node. When the selection is collapsed, and the content
* is focused and editable, the caret will blink there.
* @param aContainer The given node where the selection will be set
* @param aOffset Where in given dom node to place the selection (the
* offset into the given node)
*/
MOZ_CAN_RUN_SCRIPT void CollapseInLimiter(nsINode& aContainer,
uint32_t aOffset,
ErrorResult& aRv) {
CollapseInternal(InLimiter::eYes, RawRangeBoundary(&aContainer, aOffset),
aRv);
}
private:
enum class InLimiter {
// If eYes, the method may reset selection limiter and move focus if the
// given range is out of the limiter.
eYes,
// If eNo, the method won't reset selection limiter. So, if given range
// is out of bounds, the method may return error.
eNo,
};
MOZ_CAN_RUN_SCRIPT
void CollapseInternal(InLimiter aInLimiter, const RawRangeBoundary& aPoint,
ErrorResult& aRv);
public:
/**
* Collapses the whole selection to a single point at the start
* of the current selection (irrespective of direction). If content
* is focused and editable, the caret will blink there.
*/
MOZ_CAN_RUN_SCRIPT void CollapseToStart(mozilla::ErrorResult& aRv);
/**
* Collapses the whole selection to a single point at the end
* of the current selection (irrespective of direction). If content
* is focused and editable, the caret will blink there.
*/
MOZ_CAN_RUN_SCRIPT void CollapseToEnd(mozilla::ErrorResult& aRv);
/**
* Extends the selection by moving the selection end to the specified node and
* offset, preserving the selection begin position. The new selection end
* result will always be from the anchorNode to the new focusNode, regardless
* of direction.
*
* @param aContainer The node where the selection will be extended to
* @param aOffset Where in aContainer to place the offset of the new
* selection end.
*/
MOZ_CAN_RUN_SCRIPT void Extend(nsINode& aContainer, uint32_t aOffset,
ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT void AddRangeAndSelectFramesAndNotifyListeners(
nsRange& aRange, mozilla::ErrorResult& aRv);
/**
* Adds all children of the specified node to the selection.
* @param aNode the parent of the children to be added to the selection.
*/
MOZ_CAN_RUN_SCRIPT void SelectAllChildren(nsINode& aNode,
mozilla::ErrorResult& aRv);
/**
* SetStartAndEnd() removes all ranges and sets new range as given range.
* Different from SetBaseAndExtent(), this won't compare the DOM points of
* aStartRef and aEndRef for performance nor set direction to eDirPrevious.
* Note that this may reset the limiter and move focus. If you don't want
* that, use SetStartAndEndInLimiter() instead.
*/
MOZ_CAN_RUN_SCRIPT
void SetStartAndEnd(const RawRangeBoundary& aStartRef,
const RawRangeBoundary& aEndRef, ErrorResult& aRv) {
SetStartAndEndInternal(InLimiter::eNo, aStartRef, aEndRef, eDirNext, aRv);
}
MOZ_CAN_RUN_SCRIPT
void SetStartAndEnd(nsINode& aStartContainer, uint32_t aStartOffset,
nsINode& aEndContainer, uint32_t aEndOffset,
ErrorResult& aRv) {
SetStartAndEnd(RawRangeBoundary(&aStartContainer, aStartOffset),
RawRangeBoundary(&aEndContainer, aEndOffset), aRv);
}
/**
* SetStartAndEndInLimiter() is similar to SetStartAndEnd(), but this respects
* the selection limiter. If all or part of given range is not in the
* limiter, this returns error.
*/
MOZ_CAN_RUN_SCRIPT
void SetStartAndEndInLimiter(const RawRangeBoundary& aStartRef,
const RawRangeBoundary& aEndRef,
ErrorResult& aRv) {
SetStartAndEndInternal(InLimiter::eYes, aStartRef, aEndRef, eDirNext, aRv);
}
MOZ_CAN_RUN_SCRIPT
void SetStartAndEndInLimiter(nsINode& aStartContainer, uint32_t aStartOffset,
nsINode& aEndContainer, uint32_t aEndOffset,
ErrorResult& aRv) {
SetStartAndEndInLimiter(RawRangeBoundary(&aStartContainer, aStartOffset),
RawRangeBoundary(&aEndContainer, aEndOffset), aRv);
}
MOZ_CAN_RUN_SCRIPT
Result<Ok, nsresult> SetStartAndEndInLimiter(
nsINode& aStartContainer, uint32_t aStartOffset, nsINode& aEndContainer,
uint32_t aEndOffset, nsDirection aDirection, int16_t aReason);
/**
* SetBaseAndExtent() is alternative of the JS API for internal use.
* Different from SetStartAndEnd(), this sets anchor and focus points as
* specified, then if anchor point is after focus node, this sets the
* direction to eDirPrevious.
* Note that this may reset the limiter and move focus. If you don't want
* that, use SetBaseAndExtentInLimier() instead.
*/
MOZ_CAN_RUN_SCRIPT
void SetBaseAndExtent(nsINode& aAnchorNode, uint32_t aAnchorOffset,
nsINode& aFocusNode, uint32_t aFocusOffset,
ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT
void SetBaseAndExtent(const RawRangeBoundary& aAnchorRef,
const RawRangeBoundary& aFocusRef, ErrorResult& aRv) {
SetBaseAndExtentInternal(InLimiter::eNo, aAnchorRef, aFocusRef, aRv);
}
/**
* SetBaseAndExtentInLimiter() is similar to SetBaseAndExtent(), but this
* respects the selection limiter. If all or part of given range is not in
* the limiter, this returns error.
*/
MOZ_CAN_RUN_SCRIPT
void SetBaseAndExtentInLimiter(nsINode& aAnchorNode, uint32_t aAnchorOffset,
nsINode& aFocusNode, uint32_t aFocusOffset,
ErrorResult& aRv) {
SetBaseAndExtentInLimiter(RawRangeBoundary(&aAnchorNode, aAnchorOffset),
RawRangeBoundary(&aFocusNode, aFocusOffset), aRv);
}
MOZ_CAN_RUN_SCRIPT
void SetBaseAndExtentInLimiter(const RawRangeBoundary& aAnchorRef,
const RawRangeBoundary& aFocusRef,
ErrorResult& aRv) {
SetBaseAndExtentInternal(InLimiter::eYes, aAnchorRef, aFocusRef, aRv);
}
void AddSelectionChangeBlocker();
void RemoveSelectionChangeBlocker();
bool IsBlockingSelectionChangeEvents() const;
// Whether this selection is focused in an editable element.
bool IsEditorSelection() const;
/**
* Set the painting style for the range. The range must be a range in
* the selection. The textRangeStyle will be used by text frame
* when it is painting the selection.
*/
nsresult SetTextRangeStyle(nsRange* aRange,
const TextRangeStyle& aTextRangeStyle);
// Methods to manipulate our mFrameSelection's ancestor limiter.
nsIContent* GetAncestorLimiter() const;
void SetAncestorLimiter(nsIContent* aLimiter);
/*
* Frame Offset cache can be used just during calling
* nsEditor::EndPlaceHolderTransaction. EndPlaceHolderTransaction will give
* rise to reflow/refreshing view/scroll, and call times of
* nsTextFrame::GetPointFromOffset whose return value is to be cached. see
* bugs 35296 and 199412
*/
void SetCanCacheFrameOffset(bool aCanCacheFrameOffset);
// Selection::GetRangesForIntervalArray
//
// Fills a nsTArray with the ranges overlapping the range specified by
// the given endpoints. Ranges in the selection exactly adjacent to the
// input range are not returned unless aAllowAdjacent is set.
//
// For example, if the following ranges were in the selection
// (assume everything is within the same node)
//
// Start Offset: 0 2 7 9
// End Offset: 2 5 9 10
//
// and passed aBeginOffset of 2 and aEndOffset of 9, then with
// aAllowAdjacent set, all the ranges should be returned. If
// aAllowAdjacent was false, the ranges [2, 5] and [7, 9] only
// should be returned
//
// Now that overlapping ranges are disallowed, there can be a maximum of
// 2 adjacent ranges
nsresult GetRangesForIntervalArray(nsINode* aBeginNode, int32_t aBeginOffset,
nsINode* aEndNode, int32_t aEndOffset,
bool aAllowAdjacent,
nsTArray<nsRange*>* aRanges);
/**
* Modifies the cursor Bidi level after a change in keyboard direction
* @param langRTL is true if the new language is right-to-left or
* false if the new language is left-to-right.
*/
nsresult SelectionLanguageChange(bool aLangRTL);
private:
bool HasSameRootOrSameComposedDoc(const nsINode& aNode);
// XXX Please don't add additional uses of this method, it's only for
// XXX supporting broken code (bug 1245883) in the following classes:
friend class ::nsCopySupport;
friend class ::nsHTMLCopyEncoder;
MOZ_CAN_RUN_SCRIPT
void AddRangeAndSelectFramesAndNotifyListeners(nsRange& aRange,
Document* aDocument,
ErrorResult&);
// This is helper method for GetPrimaryFrameForFocusNode.
// If aVisual is true, this returns caret frame.
// If false, this returns primary frame.
nsIFrame* GetPrimaryOrCaretFrameForNodeOffset(nsIContent* aContent,
uint32_t aOffset,
int32_t* aOffsetUsed,
bool aVisual) const;
// Get the cached value for nsTextFrame::GetPointFromOffset.
nsresult GetCachedFrameOffset(nsIFrame* aFrame, int32_t inOffset,
nsPoint& aPoint);
MOZ_CAN_RUN_SCRIPT
void SetStartAndEndInternal(InLimiter aInLimiter,
const RawRangeBoundary& aStartRef,
const RawRangeBoundary& aEndRef,
nsDirection aDirection, ErrorResult& aRv);
MOZ_CAN_RUN_SCRIPT
void SetBaseAndExtentInternal(InLimiter aInLimiter,
const RawRangeBoundary& aAnchorRef,
const RawRangeBoundary& aFocusRef,
ErrorResult& aRv);
public:
SelectionType GetType() const { return mSelectionType; }
SelectionCustomColors* GetCustomColors() const { return mCustomColors.get(); }
MOZ_CAN_RUN_SCRIPT void NotifySelectionListeners(bool aCalledByJS);
MOZ_CAN_RUN_SCRIPT void NotifySelectionListeners();
friend struct AutoUserInitiated;
struct MOZ_RAII AutoUserInitiated {
explicit AutoUserInitiated(Selection& aSelectionRef)
: AutoUserInitiated(&aSelectionRef) {}
explicit AutoUserInitiated(Selection* aSelection)
: mSavedValue(aSelection->mUserInitiated) {
aSelection->mUserInitiated = true;
}
AutoRestore<bool> mSavedValue;
};
private:
friend struct mozilla::AutoPrepareFocusRange;
class ScrollSelectionIntoViewEvent;
friend class ScrollSelectionIntoViewEvent;
class ScrollSelectionIntoViewEvent : public Runnable {
public:
MOZ_CAN_RUN_SCRIPT_BOUNDARY NS_DECL_NSIRUNNABLE
ScrollSelectionIntoViewEvent(Selection* aSelection, SelectionRegion aRegion,
ScrollAxis aVertical, ScrollAxis aHorizontal,
int32_t aFlags)
: Runnable("dom::Selection::ScrollSelectionIntoViewEvent"),
mSelection(aSelection),
mRegion(aRegion),
mVerticalScroll(aVertical),
mHorizontalScroll(aHorizontal),
mFlags(aFlags) {
NS_ASSERTION(aSelection, "null parameter");
}
void Revoke() { mSelection = nullptr; }
private:
Selection* mSelection;
SelectionRegion mRegion;
ScrollAxis mVerticalScroll;
ScrollAxis mHorizontalScroll;
int32_t mFlags;
};
/**
* Set mAnchorFocusRange to mStyledRanges.mRanges[aIndex] if aIndex is a valid
* index. Set mAnchorFocusRange to nullptr if aIndex is negative. Otherwise,
* i.e., if aIndex is positive but out of bounds of mStyledRanges.mRanges, do
* nothing.
*/
void SetAnchorFocusRange(int32_t aIndex);
void SelectFramesOf(nsIContent* aContent, bool aSelected) const;
/**
* https://dom.spec.whatwg.org/#concept-tree-inclusive-descendant.
*/
nsresult SelectFramesOfInclusiveDescendantsOfContent(
PostContentIterator& aPostOrderIter, nsIContent* aContent,
bool aSelected) const;
nsresult SelectFrames(nsPresContext* aPresContext, nsRange* aRange,
bool aSelect) const;
/**
* SelectFramesInAllRanges() calls SelectFrames() for all current
* ranges.
*/
void SelectFramesInAllRanges(nsPresContext* aPresContext);
/**
* @param aOutIndex points to the index of the range in mStyledRanges.mRanges.
* If aDidAddRange is true, it is in [0, mStyledRanges.Length()).
*/
MOZ_CAN_RUN_SCRIPT nsresult MaybeAddTableCellRange(nsRange& aRange,
bool* aDidAddRange,
int32_t* aOutIndex);
Document* GetDocument() const;
void Disconnect();
struct StyledRanges {
void Clear();
StyledRange* FindRangeData(nsRange* aRange);
using Elements = AutoTArray<StyledRange, 1>;
Elements::size_type Length() const;
nsresult RemoveCollapsedRanges();
nsresult RemoveRangeAndUnregisterSelection(nsRange& aRange);
/**
* Binary searches the given sorted array of ranges for the insertion point
* for the given node/offset. The given comparator is used, and the index
* where the point should appear in the array is returned.
* If there is an item in the array equal to the input point (aPointNode,
* aPointOffset), we will return the index of this item.
*
* @return the index where the point should appear in the array. In
* [0, `aElementArray->Length()`].
*/
static int32_t FindInsertionPoint(
const nsTArray<StyledRange>* aElementArray, const nsINode& aPointNode,
int32_t aPointOffset,
int32_t (*aComparator)(const nsINode&, int32_t, const nsRange&));
/**
* Works on the same principle as GetRangesForIntervalArray, however
* instead this returns the indices into mRanges between which
* the overlapping ranges lie.
*
* @param aStartIndex will be less or equal than aEndIndex.
* @param aEndIndex can be in [-1, mRanges.Length()].
*/
nsresult GetIndicesForInterval(const nsINode* aBeginNode,
int32_t aBeginOffset,
const nsINode* aEndNode, int32_t aEndOffset,
bool aAllowAdjacent, int32_t& aStartIndex,
int32_t& aEndIndex) const;
bool HasEqualRangeBoundariesAt(const nsRange& aRange,
int32_t aRangeIndex) const;
/**
* Preserves the sorting and disjunctiveness of mRanges.
*
* @param aOutIndex will point to the index of the added range, or if aRange
* is already contained, to the one containing it. Hence
* it'll always be in [0, mRanges.Length()).
*/
MOZ_CAN_RUN_SCRIPT nsresult MaybeAddRangeAndTruncateOverlaps(
nsRange* aRange, int32_t* aOutIndex, Selection& aSelection);
/**
* GetCommonEditingHost() returns common editing host of all
* ranges if there is. If at least one of the ranges is in non-editable
* element, returns nullptr. See following examples for the detail:
*
* <div id="a" contenteditable>
* an[cestor
* <div id="b" contenteditable="false">
* non-editable
* <div id="c" contenteditable>
* desc]endant
* in this case, this returns div#a because div#c is also in div#a.
*
* <div id="a" contenteditable>
* an[ce]stor
* <div id="b" contenteditable="false">
* non-editable
* <div id="c" contenteditable>
* de[sc]endant
* in this case, this returns div#a because second range is also in div#a
* and common ancestor of the range (i.e., div#c) is editable.
*
* <div id="a" contenteditable>
* an[ce]stor
* <div id="b" contenteditable="false">
* [non]-editable
* <div id="c" contenteditable>
* de[sc]endant
* in this case, this returns nullptr because the second range is in
* non-editable area.
*/
Element* GetCommonEditingHost() const;
MOZ_CAN_RUN_SCRIPT void MaybeFocusCommonEditingHost(
PresShell* aPresShell) const;
static nsresult SubtractRange(StyledRange& aRange, nsRange& aSubtract,
nsTArray<StyledRange>* aOutput);
void UnregisterSelection();
// These are the ranges inside this selection. They are kept sorted in order
// of DOM start position.
//
// This data structure is sorted by the range beginnings. As the ranges are
// disjoint, it is also implicitly sorted by the range endings. This allows
// us to perform binary searches when searching for existence of a range,
// giving us O(log n) search time.
//
// Inserting a new range requires finding the overlapping interval,
// requiring two binary searches plus up to an additional 6 DOM comparisons.
// If this proves to be a performance concern, then an interval tree may be
// a possible solution, allowing the calculation of the overlap interval in
// O(log n) time, though this would require rebalancing and other overhead.
Elements mRanges;
};
StyledRanges mStyledRanges;
RefPtr<nsRange> mAnchorFocusRange;
RefPtr<nsFrameSelection> mFrameSelection;
RefPtr<AccessibleCaretEventHub> mAccessibleCaretEventHub;
RefPtr<SelectionChangeEventDispatcher> mSelectionChangeEventDispatcher;
RefPtr<AutoScroller> mAutoScroller;
nsTArray<nsCOMPtr<nsISelectionListener>> mSelectionListeners;
nsRevocableEventPtr<ScrollSelectionIntoViewEvent> mScrollEvent;
CachedOffsetForFrame* mCachedOffsetForFrame;
nsDirection mDirection;
const SelectionType mSelectionType;
UniquePtr<SelectionCustomColors> mCustomColors;
// Non-zero if we don't want any changes we make to the selection to be
// visible to content. If non-zero, content won't be notified about changes.
uint32_t mSelectionChangeBlockerCount;
/**
* True if the current selection operation was initiated by user action.
* It determines whether we exclude -moz-user-select:none nodes or not,
* as well as whether selectstart events will be fired.
*/
bool mUserInitiated;
/**
* When the selection change is caused by a call of Selection API,
* mCalledByJS is true. Otherwise, false.
*/
bool mCalledByJS;
/**
* true if AutoCopyListner::OnSelectionChange() should be called.
*/
bool mNotifyAutoCopy;
};
// Stack-class to turn on/off selection batching.
class MOZ_STACK_CLASS SelectionBatcher final {
private:
RefPtr<Selection> mSelection;
int16_t mReason;
public:
explicit SelectionBatcher(Selection& aSelectionRef)
: SelectionBatcher(&aSelectionRef) {}
explicit SelectionBatcher(Selection* aSelection,
int16_t aReason = nsISelectionListener::NO_REASON) {
mSelection = aSelection;
mReason = aReason;
if (mSelection) {
mSelection->StartBatchChanges();
}
}
~SelectionBatcher() {
if (mSelection) {
mSelection->EndBatchChanges(mReason);
}
}
};
class MOZ_RAII AutoHideSelectionChanges final {
public:
explicit AutoHideSelectionChanges(const nsFrameSelection* aFrame);
explicit AutoHideSelectionChanges(Selection& aSelectionRef)
: AutoHideSelectionChanges(&aSelectionRef) {}
~AutoHideSelectionChanges() {
if (mSelection) {
mSelection->RemoveSelectionChangeBlocker();
}
}
private:
explicit AutoHideSelectionChanges(Selection* aSelection)
: mSelection(aSelection) {
if (mSelection) {
mSelection->AddSelectionChangeBlocker();
}
}
RefPtr<Selection> mSelection;
};
} // namespace dom
inline bool IsValidRawSelectionType(RawSelectionType aRawSelectionType) {
return aRawSelectionType >= nsISelectionController::SELECTION_NONE &&
aRawSelectionType <= nsISelectionController::SELECTION_URLSTRIKEOUT;
}
inline SelectionType ToSelectionType(RawSelectionType aRawSelectionType) {
if (!IsValidRawSelectionType(aRawSelectionType)) {
return SelectionType::eInvalid;
}
return static_cast<SelectionType>(aRawSelectionType);
}
inline RawSelectionType ToRawSelectionType(SelectionType aSelectionType) {
MOZ_ASSERT(aSelectionType != SelectionType::eInvalid);
return static_cast<RawSelectionType>(aSelectionType);
}
inline RawSelectionType ToRawSelectionType(TextRangeType aTextRangeType) {
return ToRawSelectionType(ToSelectionType(aTextRangeType));
}
inline SelectionTypeMask ToSelectionTypeMask(SelectionType aSelectionType) {
MOZ_ASSERT(aSelectionType != SelectionType::eInvalid);
return aSelectionType == SelectionType::eNone
? 0
: static_cast<SelectionTypeMask>(
1 << (static_cast<uint8_t>(aSelectionType) - 1));
}
} // namespace mozilla
#endif // mozilla_Selection_h__
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку