mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/modules/libjar/nsZipArchive.cpp

1675 строки
40 KiB
C++
Исходник Ответственный История

/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ----- BEGIN LICENSE BLOCK -----
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The Original Code is .
*
* The Initial Developer of the Original Code is Netscape Communications Corporation..
* Portions created by Netscape Communications Corporation. are
* Copyright (C) 1998 Netscape Communications Corporation.. All
* Rights Reserved.
*
* Contributor(s):
* Daniel Veditz <dveditz@netscape.com>
* Samir Gehani <sgehani@netscape.com>
* Mitch Stoltz <mstoltz@netscape.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the LGPL or the GPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ----- END LICENSE BLOCK ----- */
/*
* This module implements a simple archive extractor for the PKZIP format.
*
* The underlying nsZipArchive is NOT thread-safe. Do not pass references
* or pointers to it across thread boundaries.
*/
#ifndef STANDALONE
#include "nsWildCard.h"
#include "nscore.h"
#include "prmem.h"
#include "prio.h"
#include "plstr.h"
#include "prlog.h"
#define ZFILE_CREATE PR_WRONLY | PR_CREATE_FILE
#define READTYPE PRInt32
#include "zlib.h"
#include "nsISupportsUtils.h"
#else /* STANDALONE */
#ifdef XP_WIN
#include "windows.h"
#endif
#undef MOZILLA_CLIENT // undoes prtypes damage in zlib.h
#define ZFILE_CREATE "wb"
#define READTYPE PRUint32
#include "zlib.h"
#undef PR_PUBLIC_API
#include "zipstub.h"
#ifdef XP_MAC
#include <string.h>
#include <stdlib.h>
char * strdup(const char *src);
char * strdup(const char *src)
{
long len = strlen(src);
char *dup = (char *)malloc(len+1 * sizeof(char));
memcpy(dup, src, len+1);
return dup;
}
#endif
#endif /* STANDALONE */
#ifdef XP_UNIX
#include <sys/stat.h>
#elif defined(XP_PC)
#include <io.h>
#endif
#include "zipfile.h"
#include "zipstruct.h"
#include "nsZipArchive.h"
static PRUint16 xtoint(unsigned char *ii);
static PRUint32 xtolong(unsigned char *ll);
static PRUint16 ExtractMode(PRUint32 ext_attr);
static void dosdate(char *aOutDateStr, PRUint16 aDate);
static void dostime(char *aOutTimeStr, PRUint16 aTime);
/*---------------------------------------------
* C API wrapper for nsZipArchive
*--------------------------------------------*/
#ifdef STANDALONE
/**
* ZIP_OpenArchive
*
* opens the named zip/jar archive and returns a handle that
* represents the archive in other ZIP_ calls.
*
* @param zipname archive filename
* @param hZip receives handle if archive opened OK
* @return status code
*/
PR_PUBLIC_API(PRInt32) ZIP_OpenArchive( const char * zipname, void** hZip )
{
PRInt32 status;
/*--- error check args ---*/
if ( hZip == 0 )
return ZIP_ERR_PARAM;
/*--- NULL output to prevent use by bozos who don't check errors ---*/
*hZip = 0;
/*--- create and open the archive ---*/
nsZipArchive* zip = new nsZipArchive();
if ( zip == 0 )
return ZIP_ERR_MEMORY;
status = zip->OpenArchive(zipname);
if ( status == ZIP_OK )
*hZip = NS_STATIC_CAST(void*,zip);
else
delete zip;
return status;
}
/**
* ZIP_TestArchive
*
* Tests the integrity of this open zip archive by extracting each
* item to memory and performing a CRC check.
*
* @param hZip handle obtained from ZIP_OpenArchive
* @return status code (success indicated by ZIP_OK)
*/
PR_PUBLIC_API(PRInt32) ZIP_TestArchive( void *hZip )
{
/*--- error check args ---*/
if ( hZip == 0 )
return ZIP_ERR_PARAM;
nsZipArchive* zip = NS_STATIC_CAST(nsZipArchive*,hZip);
if ( zip->kMagic != ZIP_MAGIC )
return ZIP_ERR_PARAM; /* whatever it is isn't one of ours! */
/*--- test the archive ---*/
return zip->Test(NULL);
}
/**
* ZIP_CloseArchive
*
* closes zip archive and frees memory
* @param hZip handle obtained from ZIP_OpenArchive
* @return status code
*/
PR_PUBLIC_API(PRInt32) ZIP_CloseArchive( void** hZip )
{
/*--- error check args ---*/
if ( hZip == 0 || *hZip == 0 )
return ZIP_ERR_PARAM;
nsZipArchive* zip = NS_STATIC_CAST(nsZipArchive*,*hZip);
if ( zip->kMagic != ZIP_MAGIC )
return ZIP_ERR_PARAM; /* whatever it is isn't one of ours! */
/*--- close the archive ---*/
*hZip = 0;
delete zip;
return ZIP_OK;
}
/**
* ZIP_ExtractFile
*
* extracts named file from an opened archive
*
* @param hZip handle obtained from ZIP_OpenArchive
* @param filename name of file in archive
* @param outname filename to extract to
*/
PR_PUBLIC_API(PRInt32) ZIP_ExtractFile( void* hZip, const char * filename, const char * outname )
{
/*--- error check args ---*/
if ( hZip == 0 )
return ZIP_ERR_PARAM;
nsZipArchive* zip = NS_STATIC_CAST(nsZipArchive*,hZip);
if ( zip->kMagic != ZIP_MAGIC )
return ZIP_ERR_PARAM; /* whatever it is isn't one of ours! */
/*--- extract the file ---*/
return zip->ExtractFile( filename, outname );
}
/**
* ZIP_FindInit
*
* Initializes an enumeration of files in the archive
*
* @param hZip handle obtained from ZIP_OpenArchive
* @param pattern regexp to match files in archive, the usual shell expressions.
* NULL pattern also matches all files, faster than "*"
*/
PR_PUBLIC_API(void*) ZIP_FindInit( void* hZip, const char * pattern )
{
/*--- error check args ---*/
if ( hZip == 0 )
return 0;
nsZipArchive* zip = NS_STATIC_CAST(nsZipArchive*,hZip);
if ( zip->kMagic != ZIP_MAGIC )
return 0; /* whatever it is isn't one of ours! */
/*--- initialize the pattern search ---*/
return zip->FindInit( pattern );
}
/**
* ZIP_FindNext
*
* Puts the next name in the passed buffer. Returns ZIP_ERR_SMALLBUF when
* the name is too large for the buffer, and ZIP_ERR_FNF when there are no
* more files that match the pattern
*
* @param hFind handle obtained from ZIP_FindInit
* @param outbuf buffer to receive next filename
* @param bufsize size of allocated buffer
*/
PR_PUBLIC_API(PRInt32) ZIP_FindNext( void* hFind, char * outbuf, PRUint16 bufsize )
{
PRInt32 status;
/*--- error check args ---*/
if ( hFind == 0 )
return ZIP_ERR_PARAM;
nsZipFind* find = NS_STATIC_CAST(nsZipFind*,hFind);
if ( find->kMagic != ZIPFIND_MAGIC )
return ZIP_ERR_PARAM; /* whatever it is isn't one of ours! */
/*--- return next filename file ---*/
nsZipItem* item;
status = find->GetArchive()->FindNext( find, &item );
if ( status == ZIP_OK )
{
if ( bufsize > item->namelen )
{
PL_strcpy( outbuf, item->name );
}
else
status = ZIP_ERR_SMALLBUF;
}
return status;
}
/**
* ZIP_FindFree
*
* Releases allocated memory associated with the find token
*
* @param hFind handle obtained from ZIP_FindInit
*/
PR_PUBLIC_API(PRInt32) ZIP_FindFree( void* hFind )
{
/*--- error check args ---*/
if ( hFind == 0 )
return ZIP_ERR_PARAM;
nsZipFind* find = NS_STATIC_CAST(nsZipFind*,hFind);
if ( find->kMagic != ZIPFIND_MAGIC )
return ZIP_ERR_PARAM; /* whatever it is isn't one of ours! */
/* free the find structure */
return find->GetArchive()->FindFree( find );
}
#if defined XP_WIN
void ProcessWindowsMessages()
{
MSG msg;
while(PeekMessage(&msg, 0, 0, 0, PM_REMOVE))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
}
#endif /* XP_WIN */
#endif /* STANDALONE */
//***********************************************************
// nsZipArchive -- public methods
//***********************************************************
//---------------------------------------------
// nsZipArchive::OpenArchive
//---------------------------------------------
PRInt32 nsZipArchive::OpenArchive( const char * aArchiveName )
{
//-- validate arguments
if ( aArchiveName == 0 || *aArchiveName == '\0')
return ZIP_ERR_PARAM;
//-- not allowed to do two opens on the same object!
if ( mFd != 0 )
return ZIP_ERR_GENERAL;
//-- open the physical file
mFd = PR_Open( aArchiveName, PR_RDONLY, 0 );
if ( mFd == 0 )
return ZIP_ERR_DISK;
//-- get table of contents for archive
return BuildFileList();
}
PRInt32 nsZipArchive::OpenArchiveWithFileDesc(PRFileDesc* fd)
{
//-- validate arguments
if (fd == 0)
return ZIP_ERR_PARAM;
//-- not allowed to do two opens on the same object!
if ( mFd != 0 )
return ZIP_ERR_GENERAL;
mFd = fd;
//-- get table of contents for archive
return BuildFileList();
}
//---------------------------------------------
// nsZipArchive::Test
//---------------------------------------------
PRInt32 nsZipArchive::Test(const char *aEntryName)
{
PRInt32 rv = ZIP_OK;
nsZipItem *currItem = 0;
if (aEntryName) // only test specified item
{
currItem = GetFileItem(aEntryName);
if(!currItem)
return ZIP_ERR_FNF;
rv = TestItem(currItem);
}
else // test all items in archive
{
nsZipFind *iterator = FindInit( NULL );
if (!iterator)
return ZIP_ERR_GENERAL;
// iterate over items in list
while (ZIP_OK == FindNext(iterator, &currItem))
{
rv = TestItem(currItem);
// check if crc check failed
if (rv != ZIP_OK)
break;
#if defined STANDALONE && defined XP_WIN
ProcessWindowsMessages();
#endif
}
FindFree(iterator);
}
return rv;
}
//---------------------------------------------
// nsZipArchive::CloseArchive
//---------------------------------------------
PRInt32 nsZipArchive::CloseArchive()
{
// close the file if open
if ( mFd != 0 ) {
PR_Close(mFd);
mFd = 0;
}
// delete nsZipItems in table
nsZipItem* pItem;
for ( int i = 0; i < ZIP_TABSIZE; ++i)
{
pItem = mFiles[i];
while ( pItem != 0 )
{
mFiles[i] = pItem->next;
delete pItem;
pItem = mFiles[i];
}
}
return ZIP_OK;
}
//---------------------------------------------
// nsZipArchive::GetItem
//---------------------------------------------
PRInt32 nsZipArchive::GetItem( const char * aFilename, nsZipItem **result)
{
//-- Parameter validity check
if (aFilename == 0)
return ZIP_ERR_PARAM;
nsZipItem* item;
//-- find file information
item = GetFileItem( aFilename );
if ( item == 0 )
{
return ZIP_ERR_FNF;
}
*result = item; // Return a pointer to the struct
return ZIP_OK;
}
//---------------------------------------------
// nsZipArchive::ReadInit
//---------------------------------------------
PRInt32 nsZipArchive::ReadInit(const char* zipEntry, nsZipRead** aRead)
{
//-- Parameter validity check
if (zipEntry == 0 || aRead == 0)
return ZIP_ERR_PARAM;
PRInt32 result;
//-- find item
nsZipItem* item = GetFileItem(zipEntry);
if (!item)
return ZIP_ERR_FNF;
//-- Create nsZipRead object
*aRead = new nsZipRead(this, item);
if (aRead == 0)
return ZIP_ERR_MEMORY;
//-- Read the item into memory
// Inflate if necessary and save in mInflatedFileBuffer
// for sequential reading.
// (nsJAR needs the whole file in memory before passing it on)
char* buf = (char*)PR_Malloc(item->realsize);
if (!buf) return ZIP_ERR_MEMORY;
switch(item->compression)
{
case DEFLATED:
result = InflateItem(item, 0, buf);
break;
case STORED:
result = CopyItemToBuffer(item, buf);
break;
default:
return ZIP_ERR_UNSUPPORTED;
}
if (result == ZIP_OK)
(*aRead)->mFileBuffer = buf;
return result;
}
//------------------------------------------
// nsZipArchive::Read
//------------------------------------------
PRInt32 nsZipArchive::Read(nsZipRead* aRead, char* aOutBuf,
PRUint32 aCount, PRUint32* aBytesRead)
{
//-- Copies data from aRead->mFileBuffer
//-- Parameter check
if (aBytesRead == 0 || aRead == 0 || aOutBuf == 0 ||
aRead->mArchive != this)
return ZIP_ERR_PARAM;
if(!aRead->mItem || !aRead->mFileBuffer)
return ZIP_ERR_GENERAL;
//-- Set up the copy
PRUint32 bigBufSize = aRead->mItem->realsize;
PRUint32 curPos = aRead->mCurPos;
*aBytesRead = (curPos + aCount) < bigBufSize ? aCount : bigBufSize - curPos;
char* src = aRead->mFileBuffer + curPos;
//-- Do the copy and record number of bytes copied
memcpy(aOutBuf, src, *aBytesRead);
aRead->mCurPos += *aBytesRead;
return ZIP_OK;
}
//---------------------------------------------
// nsZipArchive::Available
//---------------------------------------------
PRUint32 nsZipArchive::Available(nsZipRead* aRead)
{
if (aRead == 0)
return 0;
nsZipItem* item = aRead->mItem;
if (item->compression == DEFLATED)
return item->realsize - aRead->mCurPos;
else
return item->size - aRead->mCurPos;
}
//---------------------------------------------
// nsZipArchive::ExtractFile
//---------------------------------------------
PRInt32 nsZipArchive::ExtractFile(const char* zipEntry, const char* aOutname)
{
PRFileDesc* fOut = PR_Open(aOutname, ZFILE_CREATE, 0644);
if (fOut == 0)
return ZIP_ERR_DISK;
nsZipItem *item = 0;
PRInt32 status = ExtractFileToFileDesc(zipEntry, fOut, &item);
PR_Close(fOut);
if (status != ZIP_OK) {
PR_Delete(aOutname);
}
#if defined(XP_UNIX)
else {
//-- set extracted file permissions
chmod(aOutname, item->mode);
}
#endif
return status;
}
PRInt32
nsZipArchive::ExtractFileToFileDesc(const char * zipEntry, PRFileDesc* outFD,
nsZipItem **outItem)
{
//-- sanity check arguments
if ( zipEntry == 0 || outFD == 0 || outItem == 0)
return ZIP_ERR_PARAM;
PRInt32 status;
//-- Find item in archive
nsZipItem* item = GetFileItem( zipEntry );
if (!item)
return ZIP_ERR_FNF;
//-- extract the file using the appropriate method
switch( item->compression )
{
case STORED:
status = CopyItemToDisk( item, outFD );
break;
case DEFLATED:
status = InflateItem( item, outFD, 0 );
break;
default:
//-- unsupported compression type
return ZIP_ERR_UNSUPPORTED;
}
*outItem = item;
return status;
}
//---------------------------------------------
// nsZipArchive::FindInit
//---------------------------------------------
nsZipFind* nsZipArchive::FindInit( const char * aPattern )
{
PRBool regExp = PR_FALSE;
char* pattern = 0;
// validate the pattern
if ( aPattern )
{
switch (NS_WildCardValid( (char*)aPattern ))
{
case INVALID_SXP:
return 0;
case NON_SXP:
regExp = PR_FALSE;
break;
case VALID_SXP:
regExp = PR_TRUE;
break;
default:
// undocumented return value from RegExpValid!
PR_ASSERT( PR_FALSE );
return 0;
}
pattern = PL_strdup( aPattern );
if ( !pattern )
return 0;
}
return new nsZipFind( this, pattern, regExp );
}
//---------------------------------------------
// nsZipArchive::FindNext
//---------------------------------------------
PRInt32 nsZipArchive::FindNext( nsZipFind* aFind, nsZipItem** aResult)
{
PRInt32 status;
PRBool found = PR_FALSE;
PRUint16 slot = aFind->mSlot;
nsZipItem* item = aFind->mItem;
if ( aFind->mArchive != this )
return ZIP_ERR_PARAM;
// we start from last match, look for next
while ( slot < ZIP_TABSIZE && !found )
{
if ( item != 0 )
item = item->next; // move to next in current chain
else
item = mFiles[slot]; // starting a new slot
if ( item == 0 )
{ // no more in this chain, move to next slot
++slot;
continue;
}
else if ( aFind->mPattern == 0 )
found = PR_TRUE; // always match
else if ( aFind->mRegExp )
found = (NS_WildCardMatch( item->name, aFind->mPattern, PR_FALSE ) == MATCH);
else
#if defined(STANDALONE) && defined(XP_MAC)
// simulate <regexp>* matches
found = ( strncmp( item->name, aFind->mPattern, strlen(aFind->mPattern) ) == 0 );
#else
found = ( PL_strcmp( item->name, aFind->mPattern ) == 0 );
#endif
}
if ( found )
{
*aResult = item;
aFind->mSlot = slot;
aFind->mItem = item;
status = ZIP_OK;
}
else
status = ZIP_ERR_FNF;
return status;
}
//---------------------------------------------
// nsZipArchive::FindFree
//---------------------------------------------
PRInt32 nsZipArchive::FindFree( nsZipFind* aFind )
{
if ( aFind->mArchive != this )
return ZIP_ERR_PARAM;
delete aFind;
return ZIP_OK;
}
//***********************************************************
// nsZipArchive -- private implementation
//***********************************************************
#define BR_BUF_SIZE 1024 /* backward read buffer size */
//---------------------------------------------
// nsZipArchive::BuildFileList
//---------------------------------------------
PRInt32 nsZipArchive::BuildFileList()
{
PRInt32 status = ZIP_OK;
PRUint8 buf[4*BR_BUF_SIZE];
ZipEnd *End;
//-----------------------------------------------------------------------
// locate the central directory via the End record
//-----------------------------------------------------------------------
PRInt32 pos = 0L;
PRInt32 bufsize = 0;
//-- get archive size using end pos
pos = PR_Seek(mFd, 0, PR_SEEK_END);
#ifndef STANDALONE
if (pos <= 0)
#else
if (pos || ((pos = ftell(mFd)) <= 0))
#endif
status = ZIP_ERR_CORRUPT;
while (status == ZIP_OK)
{
//-- read backwards in 1K-sized chunks (unless file is less than 1K)
pos > BR_BUF_SIZE ? bufsize = BR_BUF_SIZE : bufsize = pos;
pos -= bufsize;
if ( !ZIP_Seek( mFd, pos, PR_SEEK_SET ) )
{
status = ZIP_ERR_CORRUPT;
break;
}
if ( PR_Read( mFd, buf, bufsize ) != (READTYPE)bufsize )
{
status = ZIP_ERR_CORRUPT;
break;
}
//-- scan for ENDSIG
PRUint8 *endp = buf + bufsize;
PRUint32 endsig;
PRBool bEndsigFound = PR_FALSE;
for (endp -= sizeof(ZipEnd); endp >= buf; endp--)
{
endsig = xtolong(endp);
if (endsig == ENDSIG)
{
bEndsigFound = PR_TRUE;
break;
}
}
if (bEndsigFound)
{
End = (ZipEnd *) endp;
//-- set pos to start of central directory
pos = xtolong(End->offset_central_dir);
if ( !ZIP_Seek( mFd, pos, PR_SEEK_SET ) )
status = ZIP_ERR_CORRUPT;
break;
}
if(pos <= 0)
//-- We're at the beginning of the file, and still no sign
//-- of the end signiture. File must be corrupted!
status = ZIP_ERR_CORRUPT;
//-- backward read must overlap ZipEnd length
pos += sizeof(ZipEnd);
} /* while looking for end signature */
//-------------------------------------------------------
// read the central directory headers
//-------------------------------------------------------
if ( status == ZIP_OK )
{
//-- we think we found the central directory, read in the first chunk
pos = 0;
bufsize = PR_Read( mFd, &buf, sizeof(buf) );
if (bufsize < sizeof(ZipCentral) + sizeof(ZipEnd))
{
// We know we read the end sig and got pointed at the central
// directory--there should be at least this much
//
// (technically there can be a completely empty archive with only a
// ZipEnd structure; that's pointless and might as well be an error.)
status = ZIP_ERR_DISK;
}
//-- verify it's a central directory record
if ( xtolong( buf ) != CENTRALSIG )
status = ZIP_ERR_CORRUPT;
}
//-- loop through directory records
//
//-- we enter the loop positioned at a central directory record
//-- with enough valid data in the buffer to contain one
while ( status == ZIP_OK )
{
//-------------------------------------------------------
// read the fixed-size data
//-------------------------------------------------------
ZipCentral* central = (ZipCentral*)(buf+pos);
PRUint32 namelen = xtoint( central->filename_len );
PRUint32 extralen = xtoint( central->extrafield_len );
PRUint32 commentlen = xtoint( central->commentfield_len );
nsZipItem* item = new nsZipItem();
if (!item)
{
status = ZIP_ERR_MEMORY;
break;
}
item->namelen = namelen;
item->headerloc = xtolong( central->localhdr_offset );
item->compression = xtoint( central->method );
item->size = xtolong( central->size );
item->realsize = xtolong( central->orglen );
item->crc32 = xtolong( central->crc32 );
item->mode = ExtractMode(xtolong( central->external_attributes ));
item->time = xtoint( central->time );
item->date = xtoint( central->date );
pos += sizeof(ZipCentral);
//-------------------------------------------------------
// get the item name
//-------------------------------------------------------
item->name = new char[namelen + 1];
if ( !item->name )
{
status = ZIP_ERR_MEMORY;
delete item;
break;
}
PRUint32 leftover = (PRUint32)(bufsize - pos);
if ( leftover < namelen )
{
//-- not enough data left in buffer for the name.
//-- move leftover to top of buffer and read more
memcpy( buf, buf+pos, leftover );
bufsize = leftover + PR_Read( mFd, buf+leftover, bufsize-leftover );
pos = 0;
//-- make sure we were able to read enough
if ( (PRUint32)bufsize < namelen )
{
status = ZIP_ERR_CORRUPT;
break;
}
}
memcpy( item->name, buf+pos, namelen );
item->name[namelen] = 0;
//-- add item to file table
PRUint32 hash = HashName( item->name );
item->next = mFiles[hash];
mFiles[hash] = item;
pos += namelen;
//-------------------------------------------------------
// set up to process the next item at the top of loop
//-------------------------------------------------------
leftover = (PRUint32)(bufsize - pos);
if ( leftover < (extralen + commentlen + sizeof(ZipCentral)) )
{
//-- not enough data left to process at top of loop.
//-- move leftover and read more
memcpy( buf, buf+pos, leftover );
bufsize = leftover + PR_Read( mFd, buf+leftover, bufsize-leftover );
pos = 0;
}
//-- set position to start of next ZipCentral record
pos += extralen + commentlen;
PRUint32 sig = xtolong( buf+pos );
if ( sig != CENTRALSIG )
{
//-- we must be done or else archive is corrupt
if ( sig != ENDSIG )
status = ZIP_ERR_CORRUPT;
break;
}
//-- make sure we've read enough
if ( bufsize < pos + sizeof(ZipCentral) )
{
status = ZIP_ERR_CORRUPT;
break;
}
} /* while reading central directory records */
return status;
}
//---------------------------------------------
// nsZipArchive::GetFileItem
//---------------------------------------------
nsZipItem* nsZipArchive::GetFileItem( const char * zipEntry )
{
PR_ASSERT( zipEntry != 0 );
nsZipItem* item = mFiles[ HashName(zipEntry) ];
for ( ; item != 0; item = item->next )
{
if ( 0 == PL_strcmp( zipEntry, item->name ) )
break; //-- found it
}
return item;
}
//---------------------------------------------
// nsZipArchive::HashName
//---------------------------------------------
PRUint32 nsZipArchive::HashName( const char* aName )
{
PRUint32 val = 0;
PRUint8* c;
PR_ASSERT( aName != 0 );
for ( c = (PRUint8*)aName; *c != 0; c++ ) {
val = val*37 + *c;
}
return (val % ZIP_TABSIZE);
}
//---------------------------------------------
// nsZipArchive::SeekToItem
//---------------------------------------------
PRInt32 nsZipArchive::SeekToItem(const nsZipItem* aItem)
{
PR_ASSERT (aItem);
//-- the first time an item is used we need to calculate its offset
if ( aItem->offset == 0 )
{
//-- read local header to extract local extralen
//-- NOTE: extralen is different in central header and local header
//-- for archives created using the Unix "zip" utility. To set
//-- the offset accurately we need the local extralen.
if ( !ZIP_Seek( mFd, aItem->headerloc, PR_SEEK_SET ) )
return ZIP_ERR_CORRUPT;
ZipLocal Local;
if ( PR_Read(mFd, (char*)&Local, sizeof(ZipLocal)) != (READTYPE)sizeof(ZipLocal)
|| xtolong( Local.signature ) != LOCALSIG )
{
//-- read error or local header not found
return ZIP_ERR_CORRUPT;
}
((nsZipItem*)aItem)->offset = aItem->headerloc + sizeof(Local) +
xtoint( Local.filename_len ) +
xtoint( Local.extrafield_len );
}
//-- move to start of file in archive
if ( !ZIP_Seek( mFd, aItem->offset, PR_SEEK_SET ) )
return ZIP_ERR_CORRUPT;
return ZIP_OK;
}
//---------------------------------------------
// nsZipArchive::CopyItemToBuffer
//---------------------------------------------
PRInt32 nsZipArchive::CopyItemToBuffer(const nsZipItem* aItem, char* aOutBuf)
{
PR_ASSERT(aOutBuf != 0 && aItem != 0);
//-- move to the start of file's data
if ( SeekToItem( aItem ) != ZIP_OK )
return ZIP_ERR_CORRUPT;
//-- Read from file
PRUint32 actual = PR_Read( mFd, aOutBuf, aItem->realsize);
if (actual != aItem->realsize)
return ZIP_ERR_CORRUPT;
//-- verify crc32
PRUint32 calculatedCRC = crc32(0L, Z_NULL, 0);
calculatedCRC = crc32( calculatedCRC,(const unsigned char*)aOutBuf,
aItem->realsize);
if (calculatedCRC != aItem->crc32)
return ZIP_ERR_CORRUPT;
return ZIP_OK;
}
//---------------------------------------------
// nsZipArchive::CopyItemToDisk
//---------------------------------------------
PRInt32 nsZipArchive::CopyItemToDisk(const nsZipItem* aItem, PRFileDesc* fOut)
{
PRInt32 status = ZIP_OK;
PRUint32 chunk, pos, size, crc;
PR_ASSERT( aItem != 0 && fOut != 0 );
//-- move to the start of file's data
if ( SeekToItem( aItem ) != ZIP_OK )
return ZIP_ERR_CORRUPT;
char* buf = (char*)PR_Malloc(ZIP_BUFLEN);
if ( buf == 0 )
return ZIP_ERR_MEMORY;
//-- initialize crc
crc = crc32(0L, Z_NULL, 0);
//-- copy chunks until file is done
size = aItem->size;
for ( pos=0; pos < size; pos += chunk )
{
chunk = (pos+ZIP_BUFLEN <= size) ? ZIP_BUFLEN : size - pos;
if ( PR_Read( mFd, buf, chunk ) != (READTYPE)chunk )
{
//-- unexpected end of data in archive
status = ZIP_ERR_CORRUPT;
break;
}
//-- incrementally update crc32
crc = crc32(crc, (const unsigned char*)buf, chunk);
if ( PR_Write( fOut, buf, chunk ) < (READTYPE)chunk )
{
//-- Couldn't write all the data (disk full?)
status = ZIP_ERR_DISK;
break;
}
}
//-- verify crc32
if ( (status == ZIP_OK) && (crc != aItem->crc32) )
status = ZIP_ERR_CORRUPT;
PR_FREEIF( buf );
return status;
}
//---------------------------------------------
// nsZipArchive::InflateItem
//---------------------------------------------
PRInt32 nsZipArchive::InflateItem( const nsZipItem* aItem, PRFileDesc* fOut,
char* bigBuf )
/*
* This function either inflates an archive item to disk, to the
* file specified by aOutname, or into a buffer specified by
* bigBuf. bigBuf then gets copied into the "real" output
* buffer a chunk at a time by ReadInflatedItem(). Memory-wise,
* this is inefficient, since it stores an entire copy of the
* decompressed item in memory, then copies it to the caller's
* buffer. A more memory-efficient implementation is possible,
* in which the outbuf in this function could be returned
* directly, but implementing it would be complex.
*/
{
PRInt32 status = ZIP_OK;
PRUint32 chunk, inpos, outpos, size, crc;
PRUint32 bigBufSize;
z_stream zs;
int zerr;
PRBool bInflating = PR_FALSE;
PRBool bRead;
PRBool bWrote;
PRBool bToFile;
Bytef* old_next_out;
// -- if aOutname is null, we'll be writing to a buffer instead of a file
if (fOut != 0)
{
PR_ASSERT( aItem != 0 );
bToFile = PR_TRUE;
}
else
{
// -- Writing to a buffer, so bigBuf must not be null.
PR_ASSERT( aItem != 0 && bigBuf != 0 );
bToFile = PR_FALSE;
bigBufSize = aItem->realsize;
}
//-- move to the start of file's data
if ( SeekToItem( aItem ) != ZIP_OK )
return ZIP_ERR_CORRUPT;
//-- allocate deflation buffers
Bytef *inbuf = (Bytef*)PR_Malloc(ZIP_BUFLEN);
Bytef *outbuf = (Bytef*)PR_Malloc(ZIP_BUFLEN);
if ( inbuf == 0 || outbuf == 0 )
{
status = ZIP_ERR_MEMORY;
goto cleanup;
}
//-- set up the inflate
memset( &zs, 0, sizeof(zs) );
zerr = inflateInit2( &zs, -MAX_WBITS );
if ( zerr != Z_OK )
{
status = ZIP_ERR_GENERAL;
goto cleanup;
}
bInflating = PR_TRUE;
//-- inflate loop
size = aItem->size;
outpos = inpos = 0;
zs.next_out = outbuf;
zs.avail_out = ZIP_BUFLEN;
crc = crc32(0L, Z_NULL, 0);
while ( zerr == Z_OK )
{
bRead = PR_FALSE;
bWrote = PR_FALSE;
if ( zs.avail_in == 0 && zs.total_in < size )
{
//-- no data to inflate yet still more in file:
//-- read another chunk of compressed data
inpos = zs.total_in; // input position
chunk = ( inpos + ZIP_BUFLEN <= size ) ? ZIP_BUFLEN : size - inpos;
if ( PR_Read( mFd, inbuf, chunk ) != (READTYPE)chunk )
{
//-- unexpected end of data
status = ZIP_ERR_CORRUPT;
break;
}
zs.next_in = inbuf;
zs.avail_in = chunk;
bRead = PR_TRUE;
}
if ( zs.avail_out == 0 )
{
if (bToFile)
{
//-- write inflated buffer to disk and make space
if ( PR_Write( fOut, outbuf, ZIP_BUFLEN ) < ZIP_BUFLEN )
{
//-- Couldn't write all the data (disk full?)
status = ZIP_ERR_DISK;
break;
}
}
else
{
//-- copy inflated buffer to our big buffer
// Assertion makes sure we don't overflow bigBuf
PR_ASSERT( outpos + ZIP_BUFLEN <= bigBufSize);
char* copyStart = bigBuf + outpos;
memcpy(copyStart, outbuf, ZIP_BUFLEN);
}
outpos = zs.total_out;
zs.next_out = outbuf;
zs.avail_out = ZIP_BUFLEN;
bWrote = PR_TRUE;
}
if(bRead || bWrote)
{
old_next_out = zs.next_out;
zerr = inflate( &zs, Z_PARTIAL_FLUSH );
//-- incrementally update crc32
crc = crc32(crc, (const unsigned char*)old_next_out, zs.next_out - old_next_out);
}
else
zerr = Z_STREAM_END;
#if defined STANDALONE && defined XP_WIN
ProcessWindowsMessages();
#endif
} // while
//-- verify crc32
if ( (status == ZIP_OK) && (crc != aItem->crc32) )
{
status = ZIP_ERR_CORRUPT;
goto cleanup;
}
//-- write last inflated bit to disk
if ( zerr == Z_STREAM_END && outpos < zs.total_out )
{
chunk = zs.total_out - outpos;
if (bToFile)
{
if ( PR_Write( fOut, outbuf, chunk ) < (READTYPE)chunk )
status = ZIP_ERR_DISK;
}
else
{
PR_ASSERT( (outpos + chunk) <= bigBufSize );
char* copyStart = bigBuf + outpos;
memcpy(copyStart, outbuf, chunk);
}
}
//-- convert zlib error to return value
if ( status == ZIP_OK && zerr != Z_OK && zerr != Z_STREAM_END )
{
status = (zerr == Z_MEM_ERROR) ? ZIP_ERR_MEMORY : ZIP_ERR_CORRUPT;
}
//-- if found no errors make sure we've converted the whole thing
PR_ASSERT( status != ZIP_OK || zs.total_in == aItem->size );
PR_ASSERT( status != ZIP_OK || zs.total_out == aItem->realsize );
cleanup:
if ( bInflating )
{
//-- free zlib internal state
inflateEnd( &zs );
}
PR_FREEIF( inbuf );
PR_FREEIF( outbuf );
return status;
}
//---------------------------------------------
// nsZipArchive::TestItem
//---------------------------------------------
PRInt32 nsZipArchive::TestItem( const nsZipItem* aItem )
{
Bytef *inbuf = NULL, *outbuf = NULL, *old_next_out;
PRUint32 size, chunk=0, inpos, crc;
PRInt32 status = ZIP_OK;
int zerr = Z_OK;
z_stream zs;
PRBool bInflating = PR_FALSE;
PRBool bRead;
PRBool bWrote;
//-- param checks
if (!aItem)
return ZIP_ERR_PARAM;
if (aItem->compression != STORED && aItem->compression != DEFLATED)
return ZIP_ERR_UNSUPPORTED;
//-- move to the start of file's data
if ( SeekToItem( aItem ) != ZIP_OK )
return ZIP_ERR_CORRUPT;
//-- allocate buffers
inbuf = (Bytef *) PR_Malloc(ZIP_BUFLEN);
if (aItem->compression == DEFLATED)
outbuf = (Bytef *) PR_Malloc(ZIP_BUFLEN);
if ( inbuf == 0 || (aItem->compression == DEFLATED && outbuf == 0) )
{
status = ZIP_ERR_MEMORY;
goto cleanup;
}
//-- set up the inflate if DEFLATED
if (aItem->compression == DEFLATED)
{
memset( &zs, 0, sizeof(zs) );
zerr = inflateInit2( &zs, -MAX_WBITS );
if ( zerr != Z_OK )
{
status = ZIP_ERR_GENERAL;
goto cleanup;
}
else
{
zs.next_out = outbuf;
zs.avail_out = ZIP_BUFLEN;
}
bInflating = PR_TRUE;
}
//-- initialize crc checksum
crc = crc32(0L, Z_NULL, 0);
size = aItem->size;
inpos = 0;
//-- read in ZIP_BUFLEN-sized chunks of item
//-- inflating if item is DEFLATED
while ( zerr == Z_OK )
{
bRead = PR_FALSE; // used to check if new data to inflate
bWrote = PR_FALSE; // used to reset zs.next_out to outbuf
// when outbuf fills up
//-- read to inbuf
if (aItem->compression == DEFLATED)
{
if ( zs.avail_in == 0 && zs.total_in < size )
{
//-- no data to inflate yet still more in file:
//-- read another chunk of compressed data
inpos = zs.total_in; // input position
chunk = ( inpos + ZIP_BUFLEN <= size ) ? ZIP_BUFLEN : size - inpos;
if ( PR_Read( mFd, inbuf, chunk ) != (READTYPE)chunk )
{
//-- unexpected end of data
status = ZIP_ERR_CORRUPT;
break;
}
zs.next_in = inbuf;
zs.avail_in = chunk;
bRead = PR_TRUE;
}
if ( zs.avail_out == 0 )
{
//-- reuse output buffer
zs.next_out = outbuf;
zs.avail_out = ZIP_BUFLEN;
bWrote = PR_TRUE; // mimic writing to disk/memory
}
}
else
{
if (inpos < size)
{
//-- read a chunk in
chunk = ( inpos + ZIP_BUFLEN <= size ) ? ZIP_BUFLEN : size - inpos;
if ( PR_Read( mFd, inbuf, chunk ) != (READTYPE)chunk )
{
//-- unexpected end of data
status = ZIP_ERR_CORRUPT;
break;
}
inpos += chunk;
}
else
{
//-- finished reading STORED item
break;
}
}
//-- inflate if item is DEFLATED
if (aItem->compression == DEFLATED)
{
if (bRead || bWrote)
{
old_next_out = zs.next_out;
zerr = inflate( &zs, Z_PARTIAL_FLUSH );
//-- incrementally update crc checksum
crc = crc32(crc, (const unsigned char*)old_next_out, zs.next_out - old_next_out);
}
else
zerr = Z_STREAM_END;
}
//-- else just use input buffer containing data from STORED item
else
{
//-- incrementally update crc checksum
crc = crc32(crc, (const unsigned char*)inbuf, chunk);
}
}
//-- convert zlib error to return value
if ( status == ZIP_OK && zerr != Z_OK && zerr != Z_STREAM_END )
{
status = (zerr == Z_MEM_ERROR) ? ZIP_ERR_MEMORY : ZIP_ERR_CORRUPT;
goto cleanup;
}
//-- verify computed crc checksum against header info crc
if (status == ZIP_OK && crc != aItem->crc32)
{
status = ZIP_ERR_CORRUPT;
}
cleanup:
if ( bInflating )
{
//-- free zlib internal state
inflateEnd( &zs );
}
PR_FREEIF(inbuf);
if (aItem->compression == DEFLATED)
PR_FREEIF(outbuf);
return status;
}
//------------------------------------------
// nsZipArchive constructor and destructor
//------------------------------------------
MOZ_DECL_CTOR_COUNTER(nsZipArchive)
nsZipArchive::nsZipArchive()
: kMagic(ZIP_MAGIC), mFd(0)
{
MOZ_COUNT_CTOR(nsZipArchive);
// initialize the table to NULL
for ( int i = 0; i < ZIP_TABSIZE; ++i) {
mFiles[i] = 0;
}
}
nsZipArchive::~nsZipArchive()
{
(void)CloseArchive();
MOZ_COUNT_DTOR(nsZipArchive);
}
//------------------------------------------
// nsZipItem constructor and destructor
//------------------------------------------
MOZ_DECL_CTOR_COUNTER(nsZipItem)
nsZipItem::nsZipItem() : name(0), offset(0), next(0)
{
MOZ_COUNT_CTOR(nsZipItem);
}
nsZipItem::~nsZipItem()
{
if (name != 0 )
{
delete [] name;
name = 0;
}
MOZ_COUNT_DTOR(nsZipItem);
}
//------------------------------------------
// nsZipRead constructor and destructor
//------------------------------------------
MOZ_DECL_CTOR_COUNTER(nsZipRead)
nsZipRead::nsZipRead( nsZipArchive* aZipArchive, nsZipItem* aZipItem )
: mArchive(aZipArchive),
mItem(aZipItem),
mCurPos(0),
mFileBuffer(0)
{
MOZ_COUNT_CTOR(nsZipRead);
}
nsZipRead::~nsZipRead()
{
PR_FREEIF(mFileBuffer);
MOZ_COUNT_DTOR(nsZipRead);
}
//------------------------------------------
// nsZipFind constructor and destructor
//------------------------------------------
MOZ_DECL_CTOR_COUNTER(nsZipFind)
nsZipFind::nsZipFind( nsZipArchive* aZip, char* aPattern, PRBool aRegExp )
: kMagic(ZIPFIND_MAGIC),
mArchive(aZip),
mPattern(aPattern),
mSlot(0),
mItem(0),
mRegExp(aRegExp)
{
MOZ_COUNT_CTOR(nsZipFind);
}
nsZipFind::~nsZipFind()
{
if (mPattern != 0 )
PL_strfree( mPattern );
MOZ_COUNT_DTOR(nsZipFind);
}
//------------------------------------------
// nsZipFind::GetArchive
//------------------------------------------
nsZipArchive* nsZipFind::GetArchive()
{
if (!mArchive)
return NULL;
return mArchive;
}
//------------------------------------------
// helper functions
//------------------------------------------
/*
* x t o i n t
*
* Converts a two byte ugly endianed integer
* to our platform's integer.
*/
static PRUint16 xtoint (unsigned char *ii)
{
return (PRUint16) ((ii [0]) | (ii [1] << 8));
}
/*
* x t o l o n g
*
* Converts a four byte ugly endianed integer
* to our platform's integer.
*/
static PRUint32 xtolong (unsigned char *ll)
{
PRUint32 ret;
ret = (
(((PRUint32) ll [0]) << 0) |
(((PRUint32) ll [1]) << 8) |
(((PRUint32) ll [2]) << 16) |
(((PRUint32) ll [3]) << 24)
);
return ret;
}
/*
* ExtractMode
*
* Extracts bits 17-24 from a 32-bit unsigned long
* representation of the external attributes field.
* Subsequently it tacks on the implicit user-read
* bit.
*/
static PRUint16 ExtractMode(PRUint32 ext_attr)
{
ext_attr &= 0x00FF0000;
ext_attr >>= 16;
ext_attr |= 0x00000100;
return (PRUint16) ext_attr;
}
/*
* d o s d a t e
*
* Based on standard MS-DOS format date.
* Tweaked to be Y2K compliant and NSPR friendly.
*/
static void dosdate (char *aOutDateStr, PRUint16 aDate)
{
PRUint16 y2kCompliantYear = (aDate >> 9) + 1980;
sprintf (aOutDateStr, "%02d/%02d/%02d",
((aDate >> 5) & 0x0F), (aDate & 0x1F), y2kCompliantYear);
return;
}
/*
* d o s t i m e
*
* Standard MS-DOS format time.
*/
static void dostime (char *aOutTimeStr, PRUint16 aTime)
{
sprintf (aOutTimeStr, "%02d:%02d",
((aTime >> 11) & 0x1F), ((aTime >> 5) & 0x3F));
return;
}
char *
nsZipItem::GetModTime()
{
char *timestr; /* e.g. 21:07 */
char *datestr; /* e.g. 06/20/1995 */
char *nsprstr; /* e.g. 06/20/1995 21:07 */
/* NSPR bug parsing dd/mm/yyyy hh:mm */
/* so we use mm/dd/yyyy hh:mm */
timestr = (char *) PR_Malloc(6 * sizeof(char));
datestr = (char *) PR_Malloc(11 * sizeof(char));
nsprstr = (char *) PR_Malloc(17 * sizeof(char));
if (!timestr || !datestr || !nsprstr)
{
PR_FREEIF(timestr);
PR_FREEIF(datestr);
PR_FREEIF(nsprstr);
return 0;
}
memset(timestr, 0, 6);
memset(datestr, 0, 11);
memset(nsprstr, 0, 17);
dosdate(datestr, this->date);
dostime(timestr, this->time);
sprintf(nsprstr, "%s %s", datestr, timestr);
PR_FREEIF(timestr);
PR_FREEIF(datestr);
return nsprstr;
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку