gecko-dev/media/gmp-clearkey/0.1/WMFH264Decoder.cpp

351 строка
8.5 KiB
C++

/*
* Copyright 2013, Mozilla Foundation and contributors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "WMFH264Decoder.h"
#include <algorithm>
namespace wmf {
WMFH264Decoder::WMFH264Decoder()
: mDecoder(nullptr)
{
memset(&mInputStreamInfo, 0, sizeof(MFT_INPUT_STREAM_INFO));
memset(&mOutputStreamInfo, 0, sizeof(MFT_OUTPUT_STREAM_INFO));
}
WMFH264Decoder::~WMFH264Decoder()
{
}
HRESULT
WMFH264Decoder::Init()
{
HRESULT hr;
hr = CreateMFT(__uuidof(CMSH264DecoderMFT),
WMFDecoderDllNameFor(H264),
mDecoder);
if (FAILED(hr)) {
// Windows 7 Enterprise Server N (which is what Mozilla's mochitests run
// on) need a different CLSID to instantiate the H.264 decoder.
hr = CreateMFT(CLSID_CMSH264DecMFT,
WMFDecoderDllNameFor(H264),
mDecoder);
}
ENSURE(SUCCEEDED(hr), hr);
hr = SetDecoderInputType();
ENSURE(SUCCEEDED(hr), hr);
hr = SetDecoderOutputType();
ENSURE(SUCCEEDED(hr), hr);
hr = SendMFTMessage(MFT_MESSAGE_NOTIFY_BEGIN_STREAMING, 0);
ENSURE(SUCCEEDED(hr), hr);
hr = SendMFTMessage(MFT_MESSAGE_NOTIFY_START_OF_STREAM, 0);
ENSURE(SUCCEEDED(hr), hr);
hr = mDecoder->GetInputStreamInfo(0, &mInputStreamInfo);
ENSURE(SUCCEEDED(hr), hr);
hr = mDecoder->GetOutputStreamInfo(0, &mOutputStreamInfo);
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
HRESULT
WMFH264Decoder::ConfigureVideoFrameGeometry(IMFMediaType* aMediaType)
{
ENSURE(aMediaType != nullptr, E_POINTER);
HRESULT hr;
IntRect pictureRegion;
hr = wmf::GetPictureRegion(aMediaType, pictureRegion);
ENSURE(SUCCEEDED(hr), hr);
UINT32 width = 0, height = 0;
hr = MFGetAttributeSize(aMediaType, MF_MT_FRAME_SIZE, &width, &height);
ENSURE(SUCCEEDED(hr), hr);
// Success! Save state.
GetDefaultStride(aMediaType, (UINT32*)&mStride);
mVideoWidth = width;
mVideoHeight = height;
mPictureRegion = pictureRegion;
LOG("WMFH264Decoder frame geometry frame=(%u,%u) stride=%u picture=(%d, %d, %d, %d)\n",
width, height,
mStride,
mPictureRegion.x, mPictureRegion.y, mPictureRegion.width, mPictureRegion.height);
return S_OK;
}
int32_t
WMFH264Decoder::GetFrameWidth() const
{
return mVideoWidth;
}
int32_t
WMFH264Decoder::GetFrameHeight() const
{
return mVideoHeight;
}
const IntRect&
WMFH264Decoder::GetPictureRegion() const
{
return mPictureRegion;
}
int32_t
WMFH264Decoder::GetStride() const
{
return mStride;
}
HRESULT
WMFH264Decoder::SetDecoderInputType()
{
HRESULT hr;
CComPtr<IMFMediaType> type;
hr = MFCreateMediaType(&type);
ENSURE(SUCCEEDED(hr), hr);
hr = type->SetGUID(MF_MT_MAJOR_TYPE, MFMediaType_Video);
ENSURE(SUCCEEDED(hr), hr);
hr = type->SetGUID(MF_MT_SUBTYPE, MFVideoFormat_H264);
ENSURE(SUCCEEDED(hr), hr);
hr = type->SetUINT32(MF_MT_INTERLACE_MODE, MFVideoInterlace_MixedInterlaceOrProgressive);
ENSURE(SUCCEEDED(hr), hr);
hr = mDecoder->SetInputType(0, type, 0);
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
HRESULT
WMFH264Decoder::SetDecoderOutputType()
{
HRESULT hr;
CComPtr<IMFMediaType> type;
UINT32 typeIndex = 0;
while (type = nullptr, SUCCEEDED(mDecoder->GetOutputAvailableType(0, typeIndex++, &type))) {
GUID subtype;
hr = type->GetGUID(MF_MT_SUBTYPE, &subtype);
if (FAILED(hr)) {
continue;
}
if (subtype == MFVideoFormat_I420 || subtype == MFVideoFormat_IYUV) {
// On Windows 7 Enterprise N the MFT reports it reports IYUV instead
// of I420. Other Windows' report I420. The formats are the same, so
// support both.
hr = mDecoder->SetOutputType(0, type, 0);
ENSURE(SUCCEEDED(hr), hr);
hr = ConfigureVideoFrameGeometry(type);
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
}
return E_FAIL;
}
HRESULT
WMFH264Decoder::SendMFTMessage(MFT_MESSAGE_TYPE aMsg, UINT32 aData)
{
ENSURE(mDecoder != nullptr, E_POINTER);
HRESULT hr = mDecoder->ProcessMessage(aMsg, aData);
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
HRESULT
WMFH264Decoder::CreateInputSample(const uint8_t* aData,
uint32_t aDataSize,
Microseconds aTimestamp,
Microseconds aDuration,
IMFSample** aOutSample)
{
HRESULT hr;
CComPtr<IMFSample> sample;
hr = MFCreateSample(&sample);
ENSURE(SUCCEEDED(hr), hr);
CComPtr<IMFMediaBuffer> buffer;
int32_t bufferSize = std::max<uint32_t>(uint32_t(mInputStreamInfo.cbSize), aDataSize);
UINT32 alignment = (mInputStreamInfo.cbAlignment > 1) ? mInputStreamInfo.cbAlignment - 1 : 0;
hr = MFCreateAlignedMemoryBuffer(bufferSize, alignment, &buffer);
ENSURE(SUCCEEDED(hr), hr);
DWORD maxLength = 0;
DWORD currentLength = 0;
BYTE* dst = nullptr;
hr = buffer->Lock(&dst, &maxLength, &currentLength);
ENSURE(SUCCEEDED(hr), hr);
// Copy data into sample's buffer.
memcpy(dst, aData, aDataSize);
hr = buffer->Unlock();
ENSURE(SUCCEEDED(hr), hr);
hr = buffer->SetCurrentLength(aDataSize);
ENSURE(SUCCEEDED(hr), hr);
hr = sample->AddBuffer(buffer);
ENSURE(SUCCEEDED(hr), hr);
hr = sample->SetSampleTime(UsecsToHNs(aTimestamp));
ENSURE(SUCCEEDED(hr), hr);
sample->SetSampleDuration(UsecsToHNs(aDuration));
*aOutSample = sample.Detach();
return S_OK;
}
HRESULT
WMFH264Decoder::CreateOutputSample(IMFSample** aOutSample)
{
HRESULT hr;
CComPtr<IMFSample> sample;
hr = MFCreateSample(&sample);
ENSURE(SUCCEEDED(hr), hr);
CComPtr<IMFMediaBuffer> buffer;
int32_t bufferSize = mOutputStreamInfo.cbSize;
UINT32 alignment = (mOutputStreamInfo.cbAlignment > 1) ? mOutputStreamInfo.cbAlignment - 1 : 0;
hr = MFCreateAlignedMemoryBuffer(bufferSize, alignment, &buffer);
ENSURE(SUCCEEDED(hr), hr);
hr = sample->AddBuffer(buffer);
ENSURE(SUCCEEDED(hr), hr);
*aOutSample = sample.Detach();
return S_OK;
}
HRESULT
WMFH264Decoder::GetOutputSample(IMFSample** aOutSample)
{
HRESULT hr;
// We allocate samples for MFT output.
MFT_OUTPUT_DATA_BUFFER output = {0};
CComPtr<IMFSample> sample;
hr = CreateOutputSample(&sample);
ENSURE(SUCCEEDED(hr), hr);
output.pSample = sample;
DWORD status = 0;
hr = mDecoder->ProcessOutput(0, 1, &output, &status);
//LOG(L"WMFH264Decoder::GetOutputSample() ProcessOutput returned 0x%x\n", hr);
CComPtr<IMFCollection> events = output.pEvents; // Ensure this is released.
if (hr == MF_E_TRANSFORM_STREAM_CHANGE) {
// Type change. Probably geometric apperature change.
hr = SetDecoderOutputType();
ENSURE(SUCCEEDED(hr), hr);
return GetOutputSample(aOutSample);
} else if (hr == MF_E_TRANSFORM_NEED_MORE_INPUT) {
return MF_E_TRANSFORM_NEED_MORE_INPUT;
}
// Treat other errors as fatal.
ENSURE(SUCCEEDED(hr), hr);
assert(sample);
// output.pSample
*aOutSample = sample.Detach(); // AddRefs
return S_OK;
}
HRESULT
WMFH264Decoder::Input(const uint8_t* aData,
uint32_t aDataSize,
Microseconds aTimestamp,
Microseconds aDuration)
{
HRESULT hr;
CComPtr<IMFSample> input = nullptr;
hr = CreateInputSample(aData, aDataSize, aTimestamp, aDuration, &input);
ENSURE(SUCCEEDED(hr) && input!=nullptr, hr);
hr = mDecoder->ProcessInput(0, input, 0);
if (hr == MF_E_NOTACCEPTING) {
// MFT *already* has enough data to produce a sample. Retrieve it.
LOG("ProcessInput returned MF_E_NOTACCEPTING\n");
return MF_E_NOTACCEPTING;
}
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
HRESULT
WMFH264Decoder::Output(IMFSample** aOutput)
{
HRESULT hr;
CComPtr<IMFSample> outputSample;
hr = GetOutputSample(&outputSample);
if (hr == MF_E_TRANSFORM_NEED_MORE_INPUT) {
return MF_E_TRANSFORM_NEED_MORE_INPUT;
}
// Treat other errors as fatal.
ENSURE(SUCCEEDED(hr) && outputSample, hr);
*aOutput = outputSample.Detach();
return S_OK;
}
HRESULT
WMFH264Decoder::Reset()
{
HRESULT hr = SendMFTMessage(MFT_MESSAGE_COMMAND_FLUSH, 0);
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
HRESULT
WMFH264Decoder::Drain()
{
HRESULT hr = SendMFTMessage(MFT_MESSAGE_COMMAND_DRAIN, 0);
ENSURE(SUCCEEDED(hr), hr);
return S_OK;
}
} // namespace wmf