gecko-dev/storage/mozStorageSQLFunctions.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * vim: sw=2 ts=2 et lcs=trail\:.,tab\:>~ :
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "mozilla/ArrayUtils.h"

#include "mozStorageSQLFunctions.h"
#include "nsTArray.h"
#include "nsUnicharUtils.h"
#include <algorithm>

namespace mozilla {
namespace storage {

////////////////////////////////////////////////////////////////////////////////
//// Local Helper Functions

namespace {

/**
 * Performs the LIKE comparison of a string against a pattern.  For more detail
 * see http://www.sqlite.org/lang_expr.html#like.
 *
 * @param aPatternItr
 *        An iterator at the start of the pattern to check for.
 * @param aPatternEnd
 *        An iterator at the end of the pattern to check for.
 * @param aStringItr
 *        An iterator at the start of the string to check for the pattern.
 * @param aStringEnd
 *        An iterator at the end of the string to check for the pattern.
 * @param aEscapeChar
 *        The character to use for escaping symbols in the pattern.
 * @return 1 if the pattern is found, 0 otherwise.
 */
int likeCompare(nsAString::const_iterator aPatternItr,
                nsAString::const_iterator aPatternEnd,
                nsAString::const_iterator aStringItr,
                nsAString::const_iterator aStringEnd, char16_t aEscapeChar) {
  const char16_t MATCH_ALL('%');
  const char16_t MATCH_ONE('_');

  bool lastWasEscape = false;
  while (aPatternItr != aPatternEnd) {
    /**
     * What we do in here is take a look at each character from the input
     * pattern, and do something with it.  There are 4 possibilities:
     * 1) character is an un-escaped match-all character
     * 2) character is an un-escaped match-one character
     * 3) character is an un-escaped escape character
     * 4) character is not any of the above
     */
    if (!lastWasEscape && *aPatternItr == MATCH_ALL) {
      // CASE 1
      /**
       * Now we need to skip any MATCH_ALL or MATCH_ONE characters that follow a
       * MATCH_ALL character.  For each MATCH_ONE character, skip one character
       * in the pattern string.
       */
      while (*aPatternItr == MATCH_ALL || *aPatternItr == MATCH_ONE) {
        if (*aPatternItr == MATCH_ONE) {
          // If we've hit the end of the string we are testing, no match
          if (aStringItr == aStringEnd) return 0;
          aStringItr++;
        }
        aPatternItr++;
      }

      // If we've hit the end of the pattern string, match
      if (aPatternItr == aPatternEnd) return 1;

      while (aStringItr != aStringEnd) {
        if (likeCompare(aPatternItr, aPatternEnd, aStringItr, aStringEnd,
                        aEscapeChar)) {
          // we've hit a match, so indicate this
          return 1;
        }
        aStringItr++;
      }

      // No match
      return 0;
    } else if (!lastWasEscape && *aPatternItr == MATCH_ONE) {
      // CASE 2
      if (aStringItr == aStringEnd) {
        // If we've hit the end of the string we are testing, no match
        return 0;
      }
      aStringItr++;
      lastWasEscape = false;
    } else if (!lastWasEscape && *aPatternItr == aEscapeChar) {
      // CASE 3
      lastWasEscape = true;
    } else {
      // CASE 4
      if (::ToUpperCase(*aStringItr) != ::ToUpperCase(*aPatternItr)) {
        // If we've hit a point where the strings don't match, there is no match
        return 0;
      }
      aStringItr++;
      lastWasEscape = false;
    }

    aPatternItr++;
  }

  return aStringItr == aStringEnd;
}

/**
 * Compute the Levenshtein Edit Distance between two strings.
 *
 * @param aStringS
 *        a string
 * @param aStringT
 *        another string
 * @param _result
 *        an outparam that will receive the edit distance between the arguments
 * @return a Sqlite result code, e.g. SQLITE_OK, SQLITE_NOMEM, etc.
 */
int levenshteinDistance(const nsAString &aStringS, const nsAString &aStringT,
                        int *_result) {
  // Set the result to a non-sensical value in case we encounter an error.
  *_result = -1;

  const uint32_t sLen = aStringS.Length();
  const uint32_t tLen = aStringT.Length();

  if (sLen == 0) {
    *_result = tLen;
    return SQLITE_OK;
  }
  if (tLen == 0) {
    *_result = sLen;
    return SQLITE_OK;
  }

  // Notionally, Levenshtein Distance is computed in a matrix.  If we
  // assume s = "span" and t = "spam", the matrix would look like this:
  //    s -->
  //  t          s   p   a   n
  //  |      0   1   2   3   4
  //  V  s   1   *   *   *   *
  //     p   2   *   *   *   *
  //     a   3   *   *   *   *
  //     m   4   *   *   *   *
  //
  // Note that the row width is sLen + 1 and the column height is tLen + 1,
  // where sLen is the length of the string "s" and tLen is the length of "t".
  // The first row and the first column are initialized as shown, and
  // the algorithm computes the remaining cells row-by-row, and
  // left-to-right within each row.  The computation only requires that
  // we be able to see the current row and the previous one.

  // Allocate memory for two rows.
  AutoTArray<int, nsAutoString::kStorageSize> row1;
  AutoTArray<int, nsAutoString::kStorageSize> row2;

  // Declare the raw pointers that will actually be used to access the memory.
  int *prevRow = row1.AppendElements(sLen + 1);
  int *currRow = row2.AppendElements(sLen + 1);

  // Initialize the first row.
  for (uint32_t i = 0; i <= sLen; i++) prevRow[i] = i;

  const char16_t *s = aStringS.BeginReading();
  const char16_t *t = aStringT.BeginReading();

  // Compute the empty cells in the "matrix" row-by-row, starting with
  // the second row.
  for (uint32_t ti = 1; ti <= tLen; ti++) {
    // Initialize the first cell in this row.
    currRow[0] = ti;

    // Get the character from "t" that corresponds to this row.
    const char16_t tch = t[ti - 1];

    // Compute the remaining cells in this row, left-to-right,
    // starting at the second column (and first character of "s").
    for (uint32_t si = 1; si <= sLen; si++) {
      // Get the character from "s" that corresponds to this column,
      // compare it to the t-character, and compute the "cost".
      const char16_t sch = s[si - 1];
      int cost = (sch == tch) ? 0 : 1;

      // ............ We want to calculate the value of cell "d" from
      // ...ab....... the previously calculated (or initialized) cells
      // ...cd....... "a", "b", and "c", where d = min(a', b', c').
      // ............
      int aPrime = prevRow[si - 1] + cost;
      int bPrime = prevRow[si] + 1;
      int cPrime = currRow[si - 1] + 1;
      currRow[si] = std::min(aPrime, std::min(bPrime, cPrime));
    }

    // Advance to the next row.  The current row becomes the previous
    // row and we recycle the old previous row as the new current row.
    // We don't need to re-initialize the new current row since we will
    // rewrite all of its cells anyway.
    int *oldPrevRow = prevRow;
    prevRow = currRow;
    currRow = oldPrevRow;
  }

  // The final result is the value of the last cell in the last row.
  // Note that that's now in the "previous" row, since we just swapped them.
  *_result = prevRow[sLen];
  return SQLITE_OK;
}

// This struct is used only by registerFunctions below, but ISO C++98 forbids
// instantiating a template dependent on a locally-defined type.  Boo-urns!
struct Functions {
  const char *zName;
  int nArg;
  int enc;
  void *pContext;
  void (*xFunc)(::sqlite3_context *, int, sqlite3_value **);
};

}  // namespace

////////////////////////////////////////////////////////////////////////////////
//// Exposed Functions

int registerFunctions(sqlite3 *aDB) {
  Functions functions[] = {
      {"lower", 1, SQLITE_UTF16, 0, caseFunction},
      {"lower", 1, SQLITE_UTF8, 0, caseFunction},
      {"upper", 1, SQLITE_UTF16, (void *)1, caseFunction},
      {"upper", 1, SQLITE_UTF8, (void *)1, caseFunction},

      {"like", 2, SQLITE_UTF16, 0, likeFunction},
      {"like", 2, SQLITE_UTF8, 0, likeFunction},
      {"like", 3, SQLITE_UTF16, 0, likeFunction},
      {"like", 3, SQLITE_UTF8, 0, likeFunction},

      {"levenshteinDistance", 2, SQLITE_UTF16, 0, levenshteinDistanceFunction},
      {"levenshteinDistance", 2, SQLITE_UTF8, 0, levenshteinDistanceFunction},

      {"utf16Length", 1, SQLITE_UTF16, 0, utf16LengthFunction},
      {"utf16Length", 1, SQLITE_UTF8, 0, utf16LengthFunction},
  };

  int rv = SQLITE_OK;
  for (size_t i = 0; SQLITE_OK == rv && i < ArrayLength(functions); ++i) {
    struct Functions *p = &functions[i];
    rv = ::sqlite3_create_function(aDB, p->zName, p->nArg, p->enc, p->pContext,
                                   p->xFunc, nullptr, nullptr);
  }

  return rv;
}

////////////////////////////////////////////////////////////////////////////////
//// SQL Functions

void caseFunction(sqlite3_context *aCtx, int aArgc, sqlite3_value **aArgv) {
  NS_ASSERTION(1 == aArgc, "Invalid number of arguments!");

  nsAutoString data(
      static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[0])));
  bool toUpper = ::sqlite3_user_data(aCtx) ? true : false;

  if (toUpper)
    ::ToUpperCase(data);
  else
    ::ToLowerCase(data);

  // Set the result.
  ::sqlite3_result_text16(aCtx, data.get(), -1, SQLITE_TRANSIENT);
}

/**
 * This implements the like() SQL function.  This is used by the LIKE operator.
 * The SQL statement 'A LIKE B' is implemented as 'like(B, A)', and if there is
 * an escape character, say E, it is implemented as 'like(B, A, E)'.
 */
void likeFunction(sqlite3_context *aCtx, int aArgc, sqlite3_value **aArgv) {
  NS_ASSERTION(2 == aArgc || 3 == aArgc, "Invalid number of arguments!");

  if (::sqlite3_value_bytes(aArgv[0]) > SQLITE_MAX_LIKE_PATTERN_LENGTH) {
    ::sqlite3_result_error(aCtx, "LIKE or GLOB pattern too complex",
                           SQLITE_TOOBIG);
    return;
  }

  if (!::sqlite3_value_text16(aArgv[0]) || !::sqlite3_value_text16(aArgv[1]))
    return;

  nsDependentString A(
      static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[1])));
  nsDependentString B(
      static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[0])));
  NS_ASSERTION(!B.IsEmpty(), "LIKE string must not be null!");

  char16_t E = 0;
  if (3 == aArgc)
    E = static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[2]))[0];

  nsAString::const_iterator itrString, endString;
  A.BeginReading(itrString);
  A.EndReading(endString);
  nsAString::const_iterator itrPattern, endPattern;
  B.BeginReading(itrPattern);
  B.EndReading(endPattern);
  ::sqlite3_result_int(
      aCtx, likeCompare(itrPattern, endPattern, itrString, endString, E));
}

void levenshteinDistanceFunction(sqlite3_context *aCtx, int aArgc,
                                 sqlite3_value **aArgv) {
  NS_ASSERTION(2 == aArgc, "Invalid number of arguments!");

  // If either argument is a SQL NULL, then return SQL NULL.
  if (::sqlite3_value_type(aArgv[0]) == SQLITE_NULL ||
      ::sqlite3_value_type(aArgv[1]) == SQLITE_NULL) {
    ::sqlite3_result_null(aCtx);
    return;
  }

  int aLen = ::sqlite3_value_bytes16(aArgv[0]) / sizeof(char16_t);
  const char16_t *a =
      static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[0]));

  int bLen = ::sqlite3_value_bytes16(aArgv[1]) / sizeof(char16_t);
  const char16_t *b =
      static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[1]));

  // Compute the Levenshtein Distance, and return the result (or error).
  int distance = -1;
  const nsDependentString A(a, aLen);
  const nsDependentString B(b, bLen);
  int status = levenshteinDistance(A, B, &distance);
  if (status == SQLITE_OK) {
    ::sqlite3_result_int(aCtx, distance);
  } else if (status == SQLITE_NOMEM) {
    ::sqlite3_result_error_nomem(aCtx);
  } else {
    ::sqlite3_result_error(aCtx, "User function returned error code", -1);
  }
}

void utf16LengthFunction(sqlite3_context *aCtx, int aArgc,
                         sqlite3_value **aArgv) {
  NS_ASSERTION(1 == aArgc, "Invalid number of arguments!");

  nsDependentString data(
      static_cast<const char16_t *>(::sqlite3_value_text16(aArgv[0])));

  int len = data.Length();

  // Set the result.
  ::sqlite3_result_int(aCtx, len);
}

}  // namespace storage
}  // namespace mozilla