mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/lib/mailto/bh_strm.c

416 строки
10 KiB
C
Исходник Ответственный История

/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All
* Rights Reserved.
*
* Contributor(s):
*/
/*
**
** Binhex_stream.c
** ---------------
**
** The code for the binhex encode/decode stream.
**
** 20sep95 mym Created.
**
*/
#include "msg.h"
#include "appledbl.h"
#include "m_binhex.h"
#include "m_cvstrm.h"
#include "ad_codes.h"
#ifdef XP_MAC
#pragma warn_unusedarg off
#endif /* XP_MAC */
/*
** -----------------------------------------------------------
**
** The BinHex encode writer stream.
**
** -----------------------------------------------------------
*/
extern int MK_MIME_ERROR_WRITING_FILE;
#define WORKING_BUFF_SIZE 8192
typedef struct
{
binhex_encode_object bh_encode_obj;
char *buff; /* the working buff */
int32 s_buff; /* the size of workiong buff. */
XP_File fp;
char *fname; /* the filename for file holding the encoding */
} BinHexEncodeObject ;
/*
** Let's go "l" characters forward of the encoding for this write.
** Note:
** "s" is just a dummy paramter.
*/
PRIVATE int net_BinHex_Encode_Write (void *dataObject, const char* s, int32 l)
{
int status = 0;
BinHexEncodeObject * obj = (BinHexEncodeObject*)dataObject;
int32 count;
int32 size;
do
{
size = obj->s_buff * 11 / 16;
size = MIN(l, size);
status = binhex_encode_next(&(obj->bh_encode_obj),
(char*)s,
size,
obj->buff,
obj->s_buff,
&count);
if (status == NOERR || status == errDone)
{
/*
* we get the encode data, so call the next stream to write it to the disk.
*/
if ((int) XP_FileWrite(obj->buff, count, obj->fp) != count )
return errFileWrite;
}
if (status < 0) /* abort */
break;
l -= size;
s += size;
} while (l > 0);
return status;
}
PRIVATE unsigned int net_BinHex_Encode_Ready (NET_StreamClass *dataObject)
{
return(MAX_WRITE_READY); /* always ready for writing */
}
PRIVATE void net_BinHex_Encode_Complete (void *dataObject)
{
int32 count, len = 0;
BinHexEncodeObject *obj = (BinHexEncodeObject *)dataObject;
/*
** push the close part.
*/
len = binhex_encode_next(&(obj->bh_encode_obj),
NULL,
0,
obj->buff,
obj->s_buff,
&count); /* this help us generate the finishing */
len = XP_FileWrite(obj->buff, count, obj->fp);
/*
** time to do some dirty work -- fix the real file size.
** (since we can only know by now)
*/
binhex_reencode_head(&(obj->bh_encode_obj),
obj->buff,
obj->s_buff,
&count); /* get the head part encoded again */
XP_FileSeek(obj->fp, 0L, SEEK_SET); /* and override the previous dummy */
XP_FileWrite(obj->buff, count, obj->fp);
binhex_encode_end(&(obj->bh_encode_obj), FALSE); /* now we get a real ending */
if (obj->fp)
{
XP_FileClose(obj->fp); /* we are done with the target file */
FREEIF(obj->fname); /* free the space for the file name */
}
FREEIF(obj->buff); /* and free the working buff. */
XP_FREE(obj);
}
PRIVATE void net_BinHex_Encode_Abort (void *dataObject, int status)
{
BinHexEncodeObject * obj = (BinHexEncodeObject*)dataObject;
binhex_encode_end(&(obj->bh_encode_obj), TRUE); /* it is an aborting exist... */
if (obj->fp)
{
XP_FileClose(obj->fp); /* we are aboring with the decoding */
XP_FileRemove(obj->fname, xpURL);
/* remove the incomplete file. */
FREEIF (obj->fname); /* free the space for the file name */
}
FREEIF(obj->buff); /* free the working buff. */
XP_FREE(obj);
}
/*
** Will create a apple double encode stream:
**
** -> take the filename as the input source (it needs to be a mac file.)
** -> tkae a stream to take care of the writing to a temp file.
*/
PUBLIC NET_StreamClass *
fe_MakeBinHexEncodeStream (int format_out,
void *data_obj,
URL_Struct *URL_s,
MWContext *window_id,
char* dst_filename )
{
BinHexEncodeObject* obj;
NET_StreamClass* stream;
char* working_buff = NULL;
int bSize = WORKING_BUFF_SIZE;
TRACEMSG(("Setting up apple encode stream. Have URL: %s\n", URL_s->address));
stream = XP_NEW(NET_StreamClass);
if(stream == NULL)
return(NULL);
obj = XP_NEW(BinHexEncodeObject);
if (obj == NULL)
{
XP_FREE (stream);
return(NULL);
}
while (!working_buff && (bSize >= 512))
{
working_buff = (char *)XP_ALLOC(bSize);
if (!working_buff)
bSize /= 2;
}
if (working_buff == NULL)
{
XP_FREE (obj);
XP_FREE (stream);
return (NULL);
}
stream->name = "BinHex Encode";
stream->complete = (MKStreamCompleteFunc) net_BinHex_Encode_Complete;
stream->abort = (MKStreamAbortFunc) net_BinHex_Encode_Abort;
stream->put_block = (MKStreamWriteFunc) net_BinHex_Encode_Write;
stream->is_write_ready = (MKStreamWriteReadyFunc) net_BinHex_Encode_Ready;
stream->data_object = obj; /* document info object */
stream->window_id = window_id;
obj->fname = XP_STRDUP(dst_filename);
obj->fp = XP_FileOpen(obj->fname, xpURL, XP_FILE_TRUNCATE);
/* this file will hold all the encoded data */
if (obj->fp == NULL)
{
XP_FREE(working_buff); /* if we can't open the target file, roll back then */
if(obj->fname) XP_FREE(obj->fname);
XP_FREE (obj);
XP_FREE (stream);
return (NULL);
}
obj->buff = working_buff;
obj->s_buff = WORKING_BUFF_SIZE;
/*
** setup all the need information on the apple double encoder.
*/
binhex_encode_init(&(obj->bh_encode_obj)); /* pass the file name of the source.*/
TRACEMSG(("Returning stream from NET_BinHexEncoder\n"));
return stream;
}
/*
** -----------------------------------------------------------
**
** The BinHex decode writer stream.
**
** -----------------------------------------------------------
*/
typedef struct BinHexDecodeObject
{
binhex_decode_object bh_decode_obj;
char* in_buff;
int32 bytes_in_buff;
} BinHexDecodeObject;
PRIVATE int
net_BinHex_Decode_Write (
void *dataObject, const char* s, int32 l)
{
int status = NOERR;
BinHexDecodeObject * obj = (BinHexDecodeObject*)dataObject;
int32 size;
if (obj->bytes_in_buff + l > 1024)
{
size = 1024 - obj->bytes_in_buff;
XP_MEMCPY(obj->in_buff+obj->bytes_in_buff,
s,
size);
s += size;
l -= size;
status = binhex_decode_next(&(obj->bh_decode_obj),
obj->in_buff,
1024);
if (status != NOERR)
return status;
obj->bytes_in_buff = 0;
}
if (l > 1024)
{
/* we are sure that obj->bytes_in_buff == 0 at this point. */
status = binhex_decode_next(&(obj->bh_decode_obj),
s,
l);
}
else
{
XP_MEMCPY(obj->in_buff+obj->bytes_in_buff,
s,
l);
obj->bytes_in_buff += l;
}
return status;
}
/*
* is the stream ready for writeing?
*/
PRIVATE unsigned int net_BinHex_Decode_Ready (void *stream)
{
return(MAX_WRITE_READY); /* always ready for writing */
}
PRIVATE void net_BinHex_Decode_Complete (void *dataObject)
{
BinHexDecodeObject *obj = (BinHexDecodeObject *) dataObject;
if (obj->bytes_in_buff)
{
/* do the last calls. */
binhex_decode_next(&(obj->bh_decode_obj),
(char *)obj->in_buff,
obj->bytes_in_buff);
obj->bytes_in_buff = 0;
}
binhex_decode_end(&(obj->bh_decode_obj), FALSE); /* it is a normal clean up classes. */
if (obj->in_buff)
XP_FREE(obj->in_buff);
XP_FREE(obj);
}
PRIVATE void net_BinHex_Decode_Abort (void *dataObject, int status)
{
BinHexDecodeObject *obj = (BinHexDecodeObject *)dataObject;
binhex_decode_end(&(obj->bh_decode_obj), TRUE); /* it is an abort. */
if (obj->in_buff)
XP_FREE(obj->in_buff);
XP_FREE(obj);
}
/*
** Create the bin hex decode stream.
**
*/
PUBLIC NET_StreamClass *
fe_MakeBinHexDecodeStream (int format_out,
void *data_obj,
URL_Struct *URL_s,
MWContext *window_id )
{
BinHexDecodeObject* obj;
NET_StreamClass* stream;
TRACEMSG(("Setting up bin hex decode stream. Have URL: %s\n", URL_s->address));
stream = XP_NEW(NET_StreamClass);
if(stream == NULL)
return(NULL);
obj = XP_NEW(BinHexDecodeObject);
if (obj == NULL)
{
XP_FREE(stream);
return(NULL);
}
if ((obj->in_buff = (char *)XP_ALLOC(1024)) == NULL)
{
XP_FREE(obj);
XP_FREE(stream);
return (NULL);
}
stream->name = "BinHex Decoder";
stream->complete = (MKStreamCompleteFunc) net_BinHex_Decode_Complete;
stream->abort = (MKStreamAbortFunc) net_BinHex_Decode_Abort;
stream->put_block = (MKStreamWriteFunc) net_BinHex_Decode_Write;
stream->is_write_ready = (MKStreamWriteReadyFunc) net_BinHex_Decode_Ready;
stream->data_object = obj;
stream->window_id = window_id;
/*
** Some initial to the object.
*/
obj->bytes_in_buff = 0;
/*
** setup all the need information on the apple double encoder.
*/
binhex_decode_init(&(obj->bh_decode_obj),window_id);
#ifdef XP_MAC
obj->bh_decode_obj.mSpec = (FSSpec*)( URL_s->fe_data );
#endif
TRACEMSG(("Returning stream from NET_BinHexDecode\n"));
return stream;
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку