gecko-dev/nsprpub/pr/tests/prselect.c

373 строки
11 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/***********************************************************************
** 1997 - Netscape Communications Corporation
**
** Name: prselect_err.c
**
** Description: tests PR_Select with sockets Error condition functions.
**
** Modification History:
** 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
** The debug mode will print all of the printfs associated with this test.
** The regress mode will be the default mode. Since the regress tool limits
** the output to a one line status:PASS or FAIL,all of the printf statements
** have been handled with an if (debug_mode) statement.
***********************************************************************/
/***********************************************************************
** Includes
***********************************************************************/
/* Used to get the command line option */
#include "plgetopt.h"
#include "prttools.h"
#include "prinit.h"
#include "prio.h"
#include "prlog.h"
#include "prprf.h"
#include "prerror.h"
#include "prnetdb.h"
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
/***********************************************************************
** PRIVATE FUNCTION: Test_Result
** DESCRIPTION: Used in conjunction with the regress tool, prints out the
** status of the test case.
** INPUTS: PASS/FAIL
** OUTPUTS: None
** RETURN: None
** SIDE EFFECTS:
**
** RESTRICTIONS:
** None
** MEMORY: NA
** ALGORITHM: Determine what the status is and print accordingly.
**
***********************************************************************/
static Test_Result (int result)
{
if (result == PASS)
printf ("PASS\n");
else
printf ("FAIL\n");
}
static void
clientThreadFunc(void *arg)
{
PRUint16 port = (PRUint16) arg;
PRFileDesc *sock;
PRNetAddr addr;
char buf[128];
int i;
addr.inet.family = AF_INET;
addr.inet.port = PR_htons(port);
addr.inet.ip = PR_htonl(INADDR_LOOPBACK);
PR_snprintf(buf, sizeof(buf), "%hu", port);
for (i = 0; i < 5; i++) {
sock = PR_NewTCPSocket();
PR_Connect(sock, &addr, PR_INTERVAL_NO_TIMEOUT);
PR_Write(sock, buf, sizeof(buf));
PR_Close(sock);
}
}
int main(int argc, char **argv)
{
PRFileDesc *listenSock1, *listenSock2;
PRFileDesc *badFD;
PRFileDesc *fds0[10], *fds1[10], **fds, **other_fds;
PRIntn nfds;
PRUint16 listenPort1, listenPort2;
PRNetAddr addr;
PR_fd_set readFdSet;
char buf[128];
PRThread *clientThread;
PRInt32 retVal;
PRIntn i, j;
/* The command line argument: -d is used to determine if the test is being run
in debug mode. The regress tool requires only one line output:PASS or FAIL.
All of the printfs associated with this test has been handled with a if (debug_mode)
test.
Usage: test_name -d
*/
PLOptStatus os;
PLOptState *opt = PL_CreateOptState(argc, argv, "d:");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
{
if (PL_OPT_BAD == os) continue;
switch (opt->option)
{
case 'd': /* debug mode */
debug_mode = 1;
break;
default:
break;
}
}
PL_DestroyOptState(opt);
/* main test */
PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
PR_STDIO_INIT();
if (debug_mode) {
printf("This program tests PR_Select with sockets. Timeout, error\n");
printf("reporting, and normal operation are tested.\n\n");
}
/* Create two listening sockets */
if ((listenSock1 = PR_NewTCPSocket()) == NULL) {
fprintf(stderr, "Can't create a new TCP socket\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
addr.inet.family = AF_INET;
addr.inet.ip = PR_htonl(INADDR_ANY);
addr.inet.port = PR_htons(0);
if (PR_Bind(listenSock1, &addr) == PR_FAILURE) {
fprintf(stderr, "Can't bind socket\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
if (PR_GetSockName(listenSock1, &addr) == PR_FAILURE) {
fprintf(stderr, "PR_GetSockName failed\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
listenPort1 = PR_ntohs(addr.inet.port);
if (PR_Listen(listenSock1, 5) == PR_FAILURE) {
fprintf(stderr, "Can't listen on a socket\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
if ((listenSock2 = PR_NewTCPSocket()) == NULL) {
fprintf(stderr, "Can't create a new TCP socket\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
addr.inet.family = AF_INET;
addr.inet.ip = PR_htonl(INADDR_ANY);
addr.inet.port = PR_htons(0);
if (PR_Bind(listenSock2, &addr) == PR_FAILURE) {
fprintf(stderr, "Can't bind socket\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
if (PR_GetSockName(listenSock2, &addr) == PR_FAILURE) {
fprintf(stderr, "PR_GetSockName failed\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
listenPort2 = PR_ntohs(addr.inet.port);
if (PR_Listen(listenSock2, 5) == PR_FAILURE) {
fprintf(stderr, "Can't listen on a socket\n");
if (!debug_mode) Test_Result(FAIL);
exit(1);
}
PR_snprintf(buf, sizeof(buf),
"The server thread is listening on ports %hu and %hu\n\n",
listenPort1, listenPort2);
printf("%s", buf);
/* Set up the fd set */
PR_FD_ZERO(&readFdSet);
PR_FD_SET(listenSock1, &readFdSet);
PR_FD_SET(listenSock2, &readFdSet);
/* Testing timeout */
if (debug_mode) printf("PR_Select should time out in 5 seconds\n");
retVal = PR_Select(0 /* unused */, &readFdSet, NULL, NULL,
PR_SecondsToInterval(5));
if (retVal != 0) {
PR_snprintf(buf, sizeof(buf),
"PR_Select should time out and return 0, but it returns %ld\n",
retVal);
fprintf(stderr, "%s", buf);
if (retVal == -1) {
fprintf(stderr, "Error %d, oserror %d\n", PR_GetError(),
PR_GetOSError());
if (!debug_mode) Test_Result(FAIL);
}
exit(1);
}
if (debug_mode) printf("PR_Select timed out. Test passed.\n\n");
else Test_Result(PASS);
/* Testing bad fd */
printf("PR_Select should detect a bad file descriptor\n");
if ((badFD = PR_NewTCPSocket()) == NULL) {
fprintf(stderr, "Can't create a TCP socket\n");
exit(1);
}
PR_FD_SET(listenSock1, &readFdSet);
PR_FD_SET(listenSock2, &readFdSet);
PR_FD_SET(badFD, &readFdSet);
PR_Close(badFD); /* make the fd bad */
retVal = PR_Select(0 /* unused */, &readFdSet, NULL, NULL,
PR_INTERVAL_NO_TIMEOUT);
if (retVal != -1 || PR_GetError() != PR_BAD_DESCRIPTOR_ERROR) {
fprintf(stderr, "Failed to detect the bad fd: "
"PR_Select returns %d\n", retVal);
if (retVal == -1) {
fprintf(stderr, "Error %d, oserror %d\n", PR_GetError(),
PR_GetOSError());
}
exit(1);
}
printf("PR_Select detected a bad fd. Test passed.\n\n");
PR_FD_CLR(badFD, &readFdSet);
clientThread = PR_CreateThread(PR_USER_THREAD,
clientThreadFunc, (void *) listenPort1,
PR_PRIORITY_NORMAL, PR_LOCAL_THREAD,
PR_UNJOINABLE_THREAD, 0);
if (clientThread == NULL) {
fprintf(stderr, "can't create thread\n");
exit(1);
}
clientThread = PR_CreateThread(PR_USER_THREAD,
clientThreadFunc, (void *) listenPort2,
PR_PRIORITY_NORMAL, PR_LOCAL_THREAD,
PR_UNJOINABLE_THREAD, 0);
if (clientThread == NULL) {
fprintf(stderr, "can't create thread\n");
exit(1);
}
printf("Two client threads are created. Each of them will\n");
printf("send data to one of the two ports the server is listening on.\n");
printf("The data they send is the port number. Each of them send\n");
printf("the data five times, so you should see ten lines below,\n");
printf("interleaved in an arbitrary order.\n");
/* set up the fd array */
fds = fds0;
other_fds = fds1;
fds[0] = listenSock1;
fds[1] = listenSock2;
nfds = 2;
PR_FD_SET(listenSock1, &readFdSet);
PR_FD_SET(listenSock2, &readFdSet);
/* 20 events total */
i = 0;
while (i < 20) {
PRFileDesc **tmp;
int nextIndex;
int nEvents = 0;
retVal = PR_Select(0 /* unused */, &readFdSet, NULL, NULL,
PR_INTERVAL_NO_TIMEOUT);
PR_ASSERT(retVal != 0); /* no timeout */
if (retVal == -1) {
fprintf(stderr, "PR_Select failed (%d, %d)\n", PR_GetError(),
PR_GetOSError());
exit(1);
}
nextIndex = 2;
/* the two listening sockets */
for (j = 0; j < 2; j++) {
other_fds[j] = fds[j];
if (PR_FD_ISSET(fds[j], &readFdSet)) {
PRFileDesc *sock;
nEvents++;
sock = PR_Accept(fds[j], NULL, PR_INTERVAL_NO_TIMEOUT);
if (sock == NULL) {
fprintf(stderr, "PR_Accept() failed\n");
exit(1);
}
other_fds[nextIndex] = sock;
PR_FD_SET(sock, &readFdSet);
nextIndex++;
}
PR_FD_SET(fds[j], &readFdSet);
}
for (j = 2; j < nfds; j++) {
if (PR_FD_ISSET(fds[j], &readFdSet)) {
PRInt32 nBytes;
PR_FD_CLR(fds[j], &readFdSet);
nEvents++;
nBytes = PR_Read(fds[j], buf, sizeof(buf));
if (nBytes == -1) {
fprintf(stderr, "PR_Read() failed\n");
exit(1);
}
/* Just to be safe */
buf[127] = '\0';
PR_Close(fds[j]);
printf("The server received \"%s\" from a client\n", buf);
} else {
PR_FD_SET(fds[j], &readFdSet);
other_fds[nextIndex] = fds[j];
nextIndex++;
}
}
PR_ASSERT(retVal == nEvents);
/* swap */
tmp = fds;
fds = other_fds;
other_fds = tmp;
nfds = nextIndex;
i += nEvents;
}
printf("All tests finished\n");
PR_Cleanup();
return 0;
}