mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/extensions/xmlterm/linetest/lterm.c

743 строки
19 KiB
C
Исходник Ответственный История

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is lineterm.
*
* The Initial Developer of the Original Code is
* Ramalingam Saravanan.
* Portions created by the Initial Developer are Copyright (C) 1999
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/* lterm.c: Test driver for LINETERM
* CPP options:
* USE_NCURSES: Enable NCURSES as a screen display option
* NCURSES_MOUSE_VERSION: Enable NCURSES mouse operations
* LINUX: for Linux2.0/glibc
* SOLARIS: for Solaris2.6
*/
#include <stdio.h>
#include <signal.h>
#include <sys/types.h>
#include <fcntl.h>
#include <unistd.h>
#include <termios.h>
#include <assert.h>
#ifdef USE_NCURSES
#include <ncurses.h>
#endif
#ifndef _REENTRANT
#define _REENTRANT
#endif /* !_REENTRANT */
#include <pthread.h>
#ifdef SOLARIS
#include <stropts.h>
#include <poll.h>
#endif
#ifdef LINUX
#include <sys/ioctl.h>
#include <sys/poll.h>
#endif
#include "lineterm.h"
#include "tracelog.h"
#define MAXPROMPT 256 /* Maximum length of prompt regexp */
#define MAXCOL 4096 /* Maximum columns in line buffer */
/* (0,0) is upper lefthand corner of window */
/* Character attributes
A_NORMAL Normal display (no highlight)
A_STANDOUT Best highlighting mode of the terminal.
A_UNDERLINE Underlining
A_REVERSE Reverse video
A_BLINK Blinking
A_DIM Half bright
A_BOLD Extra bright or bold
A_PROTECT Protected mode
A_INVIS Invisible or blank mode
A_ALTCHARSET Alternate character set
A_CHARTEXT Bit-mask to extract a character
COLOR_PAIR(n) Color-pair number n
*/
/* GLOBAL VARIABLES */
static int ncursesFlag = 0;
static int ptyFlag = 1;
static int debugFlag = 0;
static int ltermNumber = -1;
static char *debugFunction;
static char *ttyDevice;
static char *errDevice;
static int screenMode = 0;
static int topScrollRow, botScrollRow;
static struct termios tios; /* TERMIOS structure */
static void finish(int sig);
static pthread_t output_handler_thread_ID;
static void *output_handler(void *arg);
static void input_handler(int *plterm);
#ifdef USE_NCURSES
static SCREEN *termScreen = NULL;
#endif
int main(int argc, char *argv[]) {
FILE *inFile, *outFile;
UNICHAR uregexp[MAXPROMPT+1];
int argNo, options, processType, retValue;
int remaining, decoded;
int messageLevel;
char *promptStr;
char **commandArgs;
char *defaultCommand[] = {(char *)getenv("SHELL"), "-i", NULL};
/* Process command line arguments */
ncursesFlag = 0;
ptyFlag = 1;
debugFlag = 0;
processType = LTERM_DETERMINE_PROCESS;
debugFunction = NULL;
ttyDevice = NULL;
errDevice = NULL;
promptStr = "#$%>?"; /* JUST A LIST OF DELIMITERS AT PRESENT */
argNo = 1;
while (argNo < argc) {
if ((strcmp(argv[argNo],"-h") == 0)||(strcmp(argv[argNo],"-help") == 0)) {
fprintf(stderr, "Usage: %s [-help] [-ncurses] [-nopty] [-debug] [-tcsh / -bash] [-function debug_fun] [-tty /dev/ttyname] [-err /dev/ttyname] [-prompt <prompt>] <command> ...\n", argv[0]);
exit(0);
} else if (strcmp(argv[argNo],"-ncurses") == 0) {
ncursesFlag = 1;
argNo++;
} else if (strcmp(argv[argNo],"-nopty") == 0) {
ptyFlag = 0;
argNo++;
} else if (strcmp(argv[argNo],"-debug") == 0) {
debugFlag = 1;
argNo++;
} else if (strcmp(argv[argNo],"-bash") == 0) {
processType = LTERM_BASH_PROCESS;
argNo++;
} else if (strcmp(argv[argNo],"-tcsh") == 0) {
processType = LTERM_TCSH_PROCESS;
argNo++;
} else if (strcmp(argv[argNo],"-function") == 0) {
argNo++;
if (argNo < argc) {
debugFunction = argv[argNo++];
}
} else if (strcmp(argv[argNo],"-tty") == 0) {
argNo++;
if (argNo < argc) {
ttyDevice = argv[argNo++];
}
} else if (strcmp(argv[argNo],"-err") == 0) {
argNo++;
if (argNo < argc) {
errDevice = argv[argNo++];
}
} else if (strcmp(argv[argNo],"-prompt") == 0) {
argNo++;
if (argNo < argc) {
promptStr = argv[argNo++];
}
} else
break;
}
if (argNo < argc) {
/* Execute specified command */
commandArgs = argv + argNo;
} else {
/* Execute default shell */
commandArgs = defaultCommand;
}
/* Convert prompt string to Unicode */
retValue = utf8toucs(promptStr, strlen(promptStr), uregexp, MAXPROMPT,
0, &remaining, &decoded);
if ((retValue < 0) || (remaining > 0)) {
fprintf(stderr, "lterm: Error in decoding prompt string\n");
exit(1);
}
assert(decoded <= MAXPROMPT);
uregexp[decoded] = U_NUL;
if (debugFlag) {
messageLevel = 98;
} else {
messageLevel = 1;
}
if (errDevice != NULL) {
/* Redirect debug STDERR output to specified device */
int errfd = -1;
if ( (errfd = open(errDevice, O_WRONLY)) == -1)
perror("lterm");
if (dup2(errfd, 2) == -1) {
fprintf(stderr, "lterm: Failed dup2 for specified stderr\n");
exit(-1);
}
fprintf(stderr, "\n\nlterm: Echoing %s output to %s\n",
argv[0], errDevice);
}
signal(SIGINT, finish); /* Interrupt handler */
if (ncursesFlag) {
/* NCURSES mode */
#ifdef USE_NCURSES
if (ttyDevice == NULL) {
/* Initialize screen on controlling TTY */
initscr();
} else {
/* Initialize screen on specified TTY */
if (errDevice != NULL)
fprintf(stderr, "lterm-00: Opening xterm %s\n", ttyDevice);
inFile = fopen( ttyDevice, "r");
outFile = fopen( ttyDevice, "w");
termScreen = newterm("xterm", outFile, inFile);
set_term(termScreen);
}
/* NCURSES screen settings */
cbreak(); /* set terminal to raw (non-canonical) mode */
noecho(); /* Disable terminal echo */
nonl(); /* Do not translate newline */
intrflush(stdscr, FALSE); /* Flush input on interrupt */
keypad(stdscr, TRUE); /* Enable user keypad */
#ifdef NCURSES_MOUSE_VERSION
mousemask(BUTTON1_CLICKED, NULL); /* Capture Button1 click events */
#endif
clear(); /* Clear screen */
#endif /* USE_NCURSES */
} else {
/* XTERM mode */
/* Get terminal attributes */
if (tcgetattr(0, &tios) == -1) {
fprintf(stderr, "lterm: Failed to get TTY attributes\n");
exit(-1);
}
/* Disable signals, canonical mode processing, and echo */
tios.c_lflag &= ~(ISIG | ICANON | ECHO );
/* set MIN=1 and TIME=0 */
tios.c_cc[VMIN] = 1;
tios.c_cc[VTIME] = 0;
/* Set terminal attributes */
if (tcsetattr(0, TCSAFLUSH, &tios) == -1) {
fprintf(stderr, "lterm: Failed to set TTY attributes\n");
exit(-1);
}
}
/* Initialize LTERM operations */
lterm_init(0);
if (errDevice != NULL) {
tlog_message("lterm-00: Testing tlog_message\n");
tlog_warning("lterm-00: Testing tlog_warning\n");
fprintf(stderr, "lterm-00: ");
tlog_unichar(uregexp, ucslen(uregexp));
tlog_set_level(LTERM_TLOG_MODULE, messageLevel, debugFunction);
}
if (errDevice != NULL)
fprintf(stderr, "lintest-00: Opening LTERM to execute %s\n", commandArgs[0]);
options = 0;
if (!ptyFlag) options |= LTERM_NOPTY_FLAG;
ltermNumber = lterm_new();
retValue = lterm_open(ltermNumber, commandArgs, NULL, NULL, uregexp,
options, processType,
24, 80, 0, 0,
NULL, NULL);
if (retValue < 0) {
fprintf(stderr, "lterm: Error %d in opening LTERM\n", retValue);
exit(1);
}
/* Create output handler thread */
retValue = pthread_create(&output_handler_thread_ID, NULL,
output_handler, (void *) &ltermNumber);
if (retValue != 0) {
fprintf(stderr, "lterm: Error %d in creating OUTPUT_HANDLER thread\n",
retValue);
finish(0);
}
if (errDevice != NULL)
fprintf(stderr, "lterm-00: Created OUTPUT_HANDLER thread\n");
/* Process input */
input_handler(&ltermNumber);
/* Join output handler thread */
if (errDevice != NULL)
fprintf(stderr, "lterm-00: Joining OUTPUT_HANDLER thread\n");
retValue = pthread_join(output_handler_thread_ID, NULL);
if (retValue != 0) {
fprintf(stderr, "lterm: Error %d in joining OUTPUT_HANDLER thread\n",
retValue);
finish(0);
}
finish(0);
}
void finish(int sig)
{
if (ncursesFlag) {
#ifdef USE_NCURSES
endwin(); /* Close window */
if (termScreen != NULL)
delscreen(termScreen);
#endif
}
if (ltermNumber >= 0) {
/* Close and delete LTERM */
lterm_delete(ltermNumber);
}
if (errDevice != NULL)
fprintf(stderr, "finished-00: Finished\n");
exit(0);
}
/** Output an Unicode message to specified file descriptor or
* to NCURSES window if fd == -1;
*/
void writeUnicode(int fd, const UNICHAR *buf, int count)
{
char str[MAXCOL];
int j, k;
k = 0;
for (j=0; j<count; j++) {
if (k >= MAXCOL-4) {
if (MAXCOL >= 4) {
str[MAXCOL-4] = '.';
str[MAXCOL-3] = '.';
str[MAXCOL-2] = '.';
}
k = MAXCOL-1;
break;
}
/* TEMPORARY IMPLEMENTATION: just truncate Unicode to byte characters */
str[k++] = buf[j];
}
if (k == 0) return;
if (fd >= 0) {
if (write(fd, str, k) != k) {
fprintf(stderr, "writeUnicode: Error in writing to FD %d\n", fd);
exit(-1);
}
} else {
#ifdef USE_NCURSES
addnstr(str, k);
#endif
}
}
/** Output an Unicode message to specified output stream
* if NOCONTROL is true, control characters are converted to printable
* characters before output
*/
void printUnicode(FILE *outStream, const UNICHAR *buf, int count, int noControl)
{
char str[MAXCOL];
int j, k;
k = 0;
for (j=0; j<count; j++) {
if (k >= MAXCOL-4) {
if (MAXCOL >= 4) {
str[MAXCOL-4] = '.';
str[MAXCOL-3] = '.';
str[MAXCOL-2] = '.';
}
k = MAXCOL-1;
break;
}
if (!noControl && ((buf[j] < U_SPACE) || (buf[j] == U_DEL)) ) {
/* Control character */
str[k++] = U_CARET;
str[k++] = buf[j]+U_ATSIGN;
} else {
/* Printable character */
/* TEMPORARY IMPLEMENTATION: just truncate Unicode to byte characters */
str[k++] = buf[j];
}
}
/* Insert terminating null character and display string */
str[k++] = '\0';
fprintf(outStream, "%s\n", str);
}
void input_handler(int *plterm)
{
char ch;
UNICHAR uch;
int n_written;
for (;;) {
/* Read a character from TTY (raw mode) */
if (ncursesFlag) {
#ifdef USE_NCURSES
ch = getch();
if (ch == '\r')
ch = '\n';
#endif
} else {
ch = getchar();
}
/* fprintf(stderr, "input_handler-00: ch=%d\n", ch); */
if (ch == 0x1D) {
fprintf(stderr, "input_handler-00: C-] character read; terminating\n");
break;
}
uch = (UNICHAR) ch;
n_written = lterm_write(*plterm, &uch, 1, LTERM_WRITE_PLAIN_INPUT);
/* Exit loop if TTY has been closed */
if (n_written == -2) {
if (errDevice != NULL)
fprintf(stderr, "input_handler-00: pseudo-TTY has been closed\n", *plterm);
break;
}
if (n_written < 0) {
fprintf(stderr, "input_handler: Error %d return from lterm_write\n",
n_written);
return;
}
}
/* Close LTERM */
if (errDevice != NULL)
fprintf(stderr, "input_handler-00: Closing LTERM %d\n", *plterm);
/* Close and delete LTERM */
lterm_delete(*plterm);
*plterm = -1;
}
void *output_handler(void *arg)
{
int *plterm = (int *) arg;
int timeout = -1;
UNICHAR buf[MAXCOL];
UNISTYLE style[MAXCOL];
int n_read, opcodes, opvals, buf_row, buf_col, cursor_row, cursor_col;
int xmax, ymax, x, y, c;
#ifdef USE_NCURSES
MEVENT mev;
#endif
if (errDevice != NULL)
fprintf(stderr, "output_handler-00: thread ID = %d, LTERM=%d\n",
pthread_self(), *plterm);
/* Get screen size */
if (ncursesFlag) {
#ifdef USE_NCURSES
getmaxyx(stdscr, ymax, xmax);
#endif
} else {
ymax = 24;
xmax = 80;
}
if (errDevice != NULL)
fprintf(stderr, "output_handler-00: screen xmax = %d, ymax = %d\n",
xmax,ymax);
for (;;) {
n_read = lterm_read(*plterm, timeout, buf, MAXCOL,
style, &opcodes, &opvals,
&buf_row, &buf_col, &cursor_row, &cursor_col);
if (n_read == -1) {
fprintf(stderr, "output_handler: Error %d return from lterm_read\n",
n_read);
return NULL;
}
/* Exit loop if TTY has been closed;
* leave it to input handler to close the LTERM.
*/
if (n_read == -2) {
if (errDevice != NULL)
fprintf(stderr, "output_handler: pseudo-TTY has been closed\n");
break;
}
if (debugFlag) {
fprintf(stderr, "output_handler-00: n_read=%d, opcodes=%x, opvals=%d, buf_row/col=%d/%d, cursor_row/col=%d/%d\n",
n_read, opcodes, opvals, buf_row, buf_col, cursor_row, cursor_col);
fprintf(stderr, "output_handler-00: U(%d): ", n_read);
printUnicode(stderr, buf, n_read, 1);
fprintf(stderr, "\n");
}
if (opcodes & LTERM_STREAMDATA_CODE) {
/* Stream data */
if (debugFlag)
fprintf(stderr, "output_handler-00: STREAMDATA\n");
} else if (opcodes & LTERM_SCREENDATA_CODE) {
/* Screen data */
if (!screenMode) {
screenMode = 1;
topScrollRow = ymax-1;
botScrollRow = 0;
}
if (debugFlag)
fprintf(stderr, "output_handler-00: SCREENDATA, topScrollRow=%d, botScrollRow=%d\n", topScrollRow, botScrollRow);
if (ncursesFlag) {
/* NCURSES mode */
#ifdef USE_NCURSES
if (opcodes & LTERM_CLEAR_CODE) {
clear();
} else if (opcodes & LTERM_INSERT_CODE) {
if ((botScrollRow > 0) && (opvals > 0)) {
move(ymax-botScrollRow-opvals, 0);
insdelln(-opvals);
}
move(ymax-1-buf_row, 0);
insdelln(opvals);
} else if (opcodes & LTERM_DELETE_CODE) {
move(ymax-1-buf_row, 0);
insdelln(-opvals);
if ((botScrollRow > 0) && (opvals > 0)) {
move(ymax-botScrollRow-opvals, 0);
insdelln(opvals);
}
} else if (opcodes & LTERM_SCROLL_CODE) {
topScrollRow = opvals;
botScrollRow = buf_row;
} else if (opcodes & LTERM_OUTPUT_CODE) {
/* Data available for display */
move(ymax-1-buf_row, buf_col);
clrtoeol();
if (n_read > 0) {
if (style[0] != LTERM_STDOUT_STYLE)
attr_on(A_REVERSE, NULL);
writeUnicode(-1, buf, n_read);
if (style[0] != LTERM_STDOUT_STYLE)
attr_off(A_REVERSE, NULL);
}
}
/* Position cursor */
move(ymax-1-cursor_row, cursor_col);
refresh();
#endif /* USE_NCURSES */
} else {
/* XTERM MODE */
char esc_seq[21];
if (opcodes & LTERM_CLEAR_CODE) {
/* Clear screen */
write(1, "\033[H\033[2J", 7);
} else if (opcodes & LTERM_INSERT_CODE) {
/* Insert lines */
sprintf(esc_seq, "\033[%d;%dH", ymax-buf_row, buf_col+1);
write(1, esc_seq, strlen(esc_seq));
sprintf(esc_seq, "\033[%dL", opvals);
write(1, esc_seq, strlen(esc_seq));
} else if (opcodes & LTERM_DELETE_CODE) {
/* Delete lines */
sprintf(esc_seq, "\033[%d;%dH", ymax-buf_row, buf_col+1);
write(1, esc_seq, strlen(esc_seq));
sprintf(esc_seq, "\033[%dM", opvals);
write(1, esc_seq, strlen(esc_seq));
} else if (opcodes & LTERM_SCROLL_CODE) {
/* Set scrolling region */
sprintf(esc_seq, "\033[%d;%dr", ymax-opvals, ymax-buf_row);
write(1, esc_seq, strlen(esc_seq));
} else if (opcodes & LTERM_OUTPUT_CODE) {
/* Data available for display */
sprintf(esc_seq, "\033[%d;%dH", ymax-buf_row, buf_col+1);
write(1, esc_seq, strlen(esc_seq));
if (n_read > 0) {
if (style[0] != LTERM_STDOUT_STYLE)
write(1, "\033[7m", 4);
writeUnicode(1, buf, n_read);
if (style[0] != LTERM_STDOUT_STYLE)
write(1, "\033[27m", 5);
}
}
sprintf(esc_seq, "\033[%d;%dH", ymax-cursor_row, cursor_col+1);
write(1, esc_seq, strlen(esc_seq));
}
} else if (opcodes & LTERM_LINEDATA_CODE) {
/* Line data */
if (debugFlag)
fprintf(stderr, "output_handler-00: LINEDATA\n");
if (screenMode)
screenMode = 0;
if (ncursesFlag) {
/* NCURSES mode */
#ifdef USE_NCURSES
/* Move cursor to bottom of screen, clear line and display line */
move(ymax-1,0);
clrtoeol();
if (n_read > 0)
writeUnicode(-1, buf, n_read);
move(ymax-1,cursor_col);
if (opcodes & LTERM_NEWLINE_CODE) {
move(0,0);
insdelln(-1);
move(ymax-1,0);
}
refresh();
#endif /* USE_NCURSES */
} else {
/* Screen mode */
int j;
/* Clear line */
write(1, "\033[2K", 4);
write(1, "\r", 1);
if (opcodes & LTERM_META_CODE)
write(1, "META", 4);
if (n_read > 0)
writeUnicode(1, buf, n_read);
for (j=0; j< (n_read-cursor_col); j++)
write(1, "\033[D", 3);
if (opcodes & LTERM_BELL_CODE)
write(1, "\007", 1);
if (opcodes & LTERM_CLEAR_CODE)
write(1, "\033[H\033[2J", 7);
if (opcodes & LTERM_NEWLINE_CODE)
write(1, "\n", 1);
}
} else if (opcodes != 0) {
fprintf(stderr, "output_handler: invalid opcodes %x\n", opcodes);
}
}
return NULL;
}
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку