gecko-dev/network/module/nsSocketTransport.cpp

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 *
 * The contents of this file are subject to the Netscape Public License
 * Version 1.0 (the "NPL"); you may not use this file except in
 * compliance with the NPL.  You may obtain a copy of the NPL at
 * http://www.mozilla.org/NPL/
 *
 * Software distributed under the NPL is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
 * for the specific language governing rights and limitations under the
 * NPL.
 *
 * The Initial Developer of this code under the NPL is Netscape
 * Communications Corporation.  Portions created by Netscape are
 * Copyright (C) 1998 Netscape Communications Corporation.  All Rights
 * Reserved.
 */
#include "nsIComponentManager.h"
#include "nsNetStream.h"
#include "nsSocketTransport.h"
#include "nsINetService.h"
#include "nsINetlibURL.h"

#include "nsIServiceManager.h"
#include "nsXPComCIID.h"

#include "netutils.h"
#include "mktcp.h"
#include "sockstub.h"

#include "plstr.h"

extern nsIStreamListener* ns_NewStreamListenerProxy(nsIStreamListener* aListener, nsIEventQueue* aEventQ);
static NS_DEFINE_IID(kIOutputStreamIID, NS_IOUTPUTSTREAM_IID);
static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
static NS_DEFINE_IID(kEventQueueServiceCID, NS_EVENTQUEUESERVICE_CID);
static NS_DEFINE_IID(kIEventQueueServiceIID, NS_IEVENTQUEUESERVICE_IID);

////////////////////////////////////////////////////////////////////////////
// from nsISupports

static NS_DEFINE_IID(kITransportIID, NS_ITRANSPORT_IID);
NS_IMPL_ADDREF(nsSocketTransport)
NS_IMPL_RELEASE(nsSocketTransport)
NS_IMPL_QUERY_INTERFACE(nsSocketTransport, kITransportIID);

////////////////////////////////////////////////////////////////////////////
// from nsITransport:

NS_METHOD 
nsSocketTransport::GetURL(nsIURL* *result) 
{
  *result = m_url;
  return NS_OK;
}


static NS_DEFINE_IID(kINetlibURLIID, NS_INETLIBURL_IID);

NS_METHOD nsSocketTransport::IsTransportOpen(PRBool * aSocketOpen)
{
	nsresult rv = NS_OK;
	if (aSocketOpen)
		*aSocketOpen = m_socketIsOpen;
	
	return rv;
}

/* Open means take the url and make a socket connection with the host...
   The user will then write data to be sent to the host via our input stream...
 */

NS_METHOD nsSocketTransport::Open(nsIURL *pURL)
{
  nsresult rv = NS_OK;

  // only actually try to do anything if we aren't open for business yet...
  if (m_socketIsOpen == PR_FALSE)
  {
	  m_socketIsOpen = PR_TRUE;

	  if (nsnull == pURL) 
		return NS_ERROR_NULL_POINTER;

	  if (nsnull == m_inputStreamConsumer)
		return NS_ERROR_NULL_POINTER;

	  NS_IF_ADDREF(pURL);
	  m_url = pURL;

	  if (!m_isFileConnection)
	  {
		  pURL->SetHostPort(m_port);
		  const char * hostName = nsnull;
		  pURL->GetHost(&hostName);
		  if (hostName)
		  {
			  PR_FREEIF(m_hostName);
			  m_hostName = PL_strdup(hostName);
		  }
	  }

	  // mscott --> okay here's where the fact that the transport implementation is just a hack on
	  // the old world comes in....right now this transport class supports both socket and file based
	  // connections. The protocol is blind to this. They just gave us a url like: news://newshost.
	  // this particular url wants a network based socket so we need to use the sockstub hack. In order
	  // to do this, we need to change the protocol part of the url string to sockstub....
	  // if the url wants a file based socket connection, we change the protocol part of the url to
	  // file:// and piggy back off of the file protocol code. Why do we do this here? Well the rest of the
	  // app (both the app who runs the url and the protocol which is handling the url) can use protocol
	  // url parts like imap, mailbox, http, etc. Then when they are done with it and hand it to us for
	  // the underlying socket to be opened, we can turn around and tweek the protocol name to use the old
	  // world technology to build it (sockstub and file).

	  if (m_isFileConnection)
		  pURL->SetProtocol("file");
	  else // we want a network socket so use sockstub
		  pURL->SetProtocol("sockstub");

	  // now the right protocol is set for the old networking world to use to complete the task
	  // so we can open it now..
	  rv = NS_OpenURL(pURL, m_inputStreamConsumer);

	  m_socketIsOpen = PR_TRUE;
  }

  return rv;
}

NS_METHOD 
nsSocketTransport::SetInputStreamConsumer(nsIStreamListener* aListener)
{
  // generates the thread safe proxy
  m_inputStreamConsumer = ns_NewStreamListenerProxy(aListener, m_evQueue);  
  NS_IF_ADDREF(m_inputStreamConsumer);
  return NS_OK;
}


NS_METHOD
nsSocketTransport::GetOutputStreamConsumer(nsIStreamListener ** aConsumer)
{
	if (aConsumer)
	{
		// assuming the transport layer is a nsIStreamListener 
		*aConsumer = ns_NewStreamListenerProxy(this, m_evQueue); 
		// add ref bfore returning...
		NS_IF_ADDREF(*aConsumer);
	}
  return NS_OK;
}


NS_METHOD 
nsSocketTransport::GetOutputStream(nsIOutputStream ** aOutputStream)
{
  if (aOutputStream) {
    // a buffered stream supports the nsIOutputStream interface
	nsBufferedStream * stream = new nsBufferedStream();
	if (stream) // return the buffer in the format they want
		stream->QueryInterface(kIOutputStreamIID, (void **) aOutputStream);
	else
		*aOutputStream = NULL;
  }
  return NS_OK;
}


NS_IMETHODIMP 
nsSocketTransport::OnStartBinding(nsIURL* pURL, const char *aContentType)
{
  return NS_OK;
}

NS_IMETHODIMP 
nsSocketTransport::OnProgress(nsIURL* pURL, 
			      PRUint32 aProgress, 
			      PRUint32 aProgressMax)
{
  return NS_OK;
}

NS_IMETHODIMP 
nsSocketTransport::OnStatus(nsIURL* pURL, const PRUnichar* aMsg)
{
  return NS_OK;
}

NS_IMETHODIMP 
nsSocketTransport::OnStopBinding(nsIURL* pURL, 
				 nsresult aStatus, 
				 const PRUnichar* aMsg)
{
// if the protocol instance called OnStopBinding then they are effectively asking us
// to close the connection. But they don't want US to go away.....
// so we need to close the underlying socket....
  CloseCurrentConnection();
  return NS_OK;
}

NS_IMETHODIMP 
nsSocketTransport::GetBindInfo(nsIURL* pURL,
			       nsStreamBindingInfo* aInfo)
{
  return NS_OK;
}

NS_IMETHODIMP 
nsSocketTransport::OnDataAvailable(nsIURL* pURL, 
				   nsIInputStream *aIStream, 
				   PRUint32 aLength)
{
  nsresult rv = NS_OK;
  PRUint32 len, lenRead;
  URL_Struct* URL_s;
  m_ready_fd = NULL;

  /* XXX: HACK The following is a hack. 
   * Get the URL_s structure and pass it to sockstub protocol code to get the 
   * socket FD so that we could write the data back.
   */

  NS_PRECONDITION(m_socketIsOpen, "Uhoh, you tried to write to a socket before opening it by calling open...");

  if (m_socketIsOpen == PR_TRUE)  // only do something useful if we are open...
  {
  	  rv = GetURLInfo(pURL, &URL_s); // this call is necessay 'cause it forces us to get m_bindedUrlStruct if we don't have it.

	  if (NS_SUCCEEDED(rv)) 
	  {
		if (nsnull != m_bindedUrlStruct)
		  /* Find the socket given URL_s pointer */
		  m_ready_fd = NET_GetSocketToHashTable(m_bindedUrlStruct);
	  } 
	  else
		return rv;
    
	  if (m_ready_fd == NULL)
		  return NS_ERROR_NULL_POINTER;

	  aIStream->GetLength(&len);

	  memset(m_buffer, '\0', NET_SOCKSTUB_BUF_SIZE);
	  while (len > 0) 
	  {
		if (len < NET_SOCKSTUB_BUF_SIZE)
		  lenRead = len;
		else
		  lenRead = NET_SOCKSTUB_BUF_SIZE;

		rv = aIStream->Read(m_buffer, lenRead, &lenRead);
		if (NS_OK != rv)
		  return rv;

		/* XXX: We should check if the write has succeeded or not */
		(int) NET_BlockingWrite(m_ready_fd, m_buffer, lenRead);
		len -= lenRead;
	  }
  }
  else
	  rv = NS_ERROR_FAILURE; // stream was not open...

  return rv;
}



////////////////////////////////////////////////////////////////////////////
// from nsSocketTransport:

nsSocketTransport::nsSocketTransport(PRUint32 aPortToUse, const char * aHostName)
{
  NS_INIT_REFCNT();

  // remember the port and host name
  NS_PRECONDITION(aPortToUse > 0 && aHostName, "Creating a socket transport with an invalid port or host name.");
  m_port = aPortToUse;
  if (aHostName)
	m_hostName = PL_strdup(aHostName);
  else
	  m_hostName = PL_strdup("");

  m_isFileConnection = PR_FALSE;

  // common initialization code 
  Initialize();
}

nsSocketTransport::nsSocketTransport(const char * fileName)
{
    NS_INIT_REFCNT();

	NS_PRECONDITION(fileName && *fileName, "Creating a socket with an invalid file name.");
	if (fileName)
	{
		m_fileName = PL_strdup(fileName);
	}

	m_isFileConnection = PR_TRUE;
	m_hostName = nsnull; // initialize value

	// common initialization code 
	Initialize();
}

void nsSocketTransport::Initialize()
{
	m_inputStream = NULL;
	m_inputStreamConsumer = NULL;
	m_url = NULL;
	m_bindedUrlStruct = NULL;

	m_outStream = NULL;
	m_outStreamSize = 0;
	m_socketIsOpen = PR_FALSE; // initially, we have not opened the socket...

	/*
	* Cache the EventQueueService...
	*/
	// XXX: What if this fails?
  
	mEventQService = nsnull;
	m_evQueue = nsnull;
	nsresult rv = nsServiceManager::GetService(kEventQueueServiceCID,
					     kIEventQueueServiceIID,
					     (nsISupports **)&mEventQService);

	if (nsnull != mEventQService) 
		mEventQService->GetThreadEventQueue(PR_GetCurrentThread(), &m_evQueue);
}

nsSocketTransport::~nsSocketTransport()
{
  nsresult rv = NS_OK;

  /* XXX: HACK The following is a hack. 
   * Get the URL_s structure and pass it to sockstub protocol code to delete it
   */

  rv = CloseCurrentConnection();

  NS_IF_RELEASE(mEventQService);
  NS_IF_RELEASE(m_evQueue);
  NS_IF_RELEASE(m_outStream);
  NS_IF_RELEASE(m_url);
  NS_IF_RELEASE(m_inputStreamConsumer);
}

NS_IMETHODIMP nsSocketTransport::SetSocketBinding(nsIURL* pURL, URL_Struct_ ** aResult)
{
  nsresult rv = NS_OK;
  nsINetlibURL *pNetlibURL = NULL;
  if (pURL && aResult)
  {
      if (pURL)
          rv = pURL->QueryInterface(kINetlibURLIID, (void**)&pNetlibURL);
	  if (NS_SUCCEEDED(rv) && pNetlibURL) 
	  {
		pNetlibURL->GetURLInfo(aResult);
		NS_RELEASE(pNetlibURL);
	  } 
  }
  
  return rv;
}

NS_IMETHODIMP 
nsSocketTransport::GetURLInfo(nsIURL* pURL, URL_Struct_ **aResult)
{
	// hack alert!!! we use a url struct to bind a socket transport to an active entry 
	// running the sockstub protocol. however the url struct is bound to the url. if you run
	// another url through the socket, you'll get a different active entry back! (i.e.
	// you won't get the original active entry that should be bound to the transport. 
	// so i'm going to remember the url_struct used to create the active entry and we'll 
	// always return that url struct for the lifetime ofthe transport. This will ensure,
	// that we always get the original active entry and those allows us to run multiple
	// urls through this connection.

	SetSocketBinding(pURL, aResult);

	if (!m_bindedUrlStruct && aResult)
		m_bindedUrlStruct = *aResult;
	else // we must be running a new url.....
	{
		// this is a god awful hack...i'm ashamed.....swap the url associated with
		// the connection info out from under us with the new url...pURL.
		
		nsIConnectionInfo * pConn = (nsIConnectionInfo *) m_bindedUrlStruct->fe_data;
		if (pConn)
			pConn->SetURL(pURL);
	}
	return NS_OK;
}

nsresult nsSocketTransport::CloseCurrentConnection()
{
	nsresult rv = NS_OK;
	URL_Struct_ * URL_s = nsnull;

	// mscott --> we used to interrupt the stream for the current url
	// here. However, the stream has already been interrupted! A typical
	// scenario: we lose a connection with the server. the stream is interrupted
	// and it tells the protocol that the connection is going down (through an 
	// on stop binding call). The protocol is then releasing the transport which 
	// is causing close current connection to get called. But the stream
	// has already been interrupted.....that's what started the whole process.
	// so don't add code to interrupt it again.

	// Note: If we need to provide the ability for the protocol to interrupt
	// the stream manually then we need a separate method in the transport
	// interface which would be used explicitly for protocol driven close
	// connection rather than netlib driven close connection...

	// now free any per socket state information...
	m_socketIsOpen = PR_FALSE;

	NS_IF_RELEASE(m_url);
    m_url = nsnull;
    PR_FREEIF(m_hostName);
    return rv;
}