gecko-dev/dom/media/MediaResource.h

302 строки
13 KiB
C++

/* vim:set ts=2 sw=2 sts=2 et cindent: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#if !defined(MediaResource_h_)
#define MediaResource_h_
#include "DecoderDoctorLogger.h"
#include "Intervals.h"
#include "MediaData.h"
#include "mozilla/Attributes.h"
#include "mozilla/GuardObjects.h"
#include "mozilla/UniquePtr.h"
#include "nsISeekableStream.h"
#include "nsThreadUtils.h"
namespace mozilla {
// Represents a section of contiguous media, with a start and end offset.
// Used to denote ranges of data which are cached.
typedef media::Interval<int64_t> MediaByteRange;
typedef media::IntervalSet<int64_t> MediaByteRangeSet;
DDLoggedTypeDeclName(MediaResource);
/**
* Provides a thread-safe, seek/read interface to resources
* loaded from a URI. Uses MediaCache to cache data received over
* Necko's async channel API, thus resolving the mismatch between clients
* that need efficient random access to the data and protocols that do not
* support efficient random access, such as HTTP.
*
* Instances of this class must be created on the main thread.
* Most methods must be called on the main thread only. Read, Seek and
* Tell must only be called on non-main threads. In the case of the Ogg
* Decoder they are called on the Decode thread for example. You must
* ensure that no threads are calling these methods once Close is called.
*
* Instances of this class are reference counted. Use nsRefPtr for
* managing the lifetime of instances of this class.
*
* The generic implementation of this class is ChannelMediaResource, which can
* handle any URI for which Necko supports AsyncOpen.
* The 'file:' protocol can be implemented efficiently with direct random
* access, so the FileMediaResource implementation class bypasses the cache.
* For cross-process blob URL, CloneableWithRangeMediaResource is used.
* MediaResource::Create automatically chooses the best implementation class.
*/
class MediaResource : public DecoderDoctorLifeLogger<MediaResource>
{
public:
// Our refcounting is threadsafe, and when our refcount drops to zero
// we dispatch an event to the main thread to delete the MediaResource.
// Note that this means it's safe for references to this object to be
// released on a non main thread, but the destructor will always run on
// the main thread.
NS_METHOD_(MozExternalRefCountType) AddRef(void);
NS_METHOD_(MozExternalRefCountType) Release(void);
// Close the resource, stop any listeners, channels, etc.
// Cancels any currently blocking Read request and forces that request to
// return an error.
virtual nsresult Close() { return NS_OK; }
// These methods are called off the main thread.
// Read up to aCount bytes from the stream. The read starts at
// aOffset in the stream, seeking to that location initially if
// it is not the current stream offset. The remaining arguments,
// results and requirements are the same as per the Read method.
virtual nsresult ReadAt(int64_t aOffset, char* aBuffer,
uint32_t aCount, uint32_t* aBytes) = 0;
// Indicate whether caching data in advance of reads is worth it.
// E.g. Caching lockless and memory-based MediaResource subclasses would be a
// waste, but caching lock/IO-bound resources means reducing the impact of
// each read.
virtual bool ShouldCacheReads() = 0;
// These can be called on any thread.
// Cached blocks associated with this stream will not be evicted
// while the stream is pinned.
virtual void Pin() = 0;
virtual void Unpin() = 0;
// Get the length of the stream in bytes. Returns -1 if not known.
// This can change over time; after a seek operation, a misbehaving
// server may give us a resource of a different length to what it had
// reported previously --- or it may just lie in its Content-Length
// header and give us more or less data than it reported. We will adjust
// the result of GetLength to reflect the data that's actually arriving.
virtual int64_t GetLength() = 0;
// Returns the offset of the first byte of cached data at or after aOffset,
// or -1 if there is no such cached data.
virtual int64_t GetNextCachedData(int64_t aOffset) = 0;
// Returns the end of the bytes starting at the given offset which are in
// cache. Returns aOffset itself if there are zero bytes available there.
virtual int64_t GetCachedDataEnd(int64_t aOffset) = 0;
// Returns true if all the data from aOffset to the end of the stream
// is in cache. If the end of the stream is not known, we return false.
virtual bool IsDataCachedToEndOfResource(int64_t aOffset) = 0;
// Reads only data which is cached in the media cache. If you try to read
// any data which overlaps uncached data, or if aCount bytes otherwise can't
// be read, this function will return failure. This function be called from
// any thread, and it is the only read operation which is safe to call on
// the main thread, since it's guaranteed to be non blocking.
virtual nsresult ReadFromCache(char* aBuffer,
int64_t aOffset,
uint32_t aCount) = 0;
/**
* Fills aRanges with MediaByteRanges representing the data which is cached
* in the media cache. Stream should be pinned during call and while
* aRanges is being used.
*/
virtual nsresult GetCachedRanges(MediaByteRangeSet& aRanges) = 0;
protected:
virtual ~MediaResource() {};
private:
void Destroy();
mozilla::ThreadSafeAutoRefCnt mRefCnt;
NS_DECL_OWNINGTHREAD
};
/**
* RAII class that handles pinning and unpinning for MediaResource and derived.
* This should be used when making calculations that involve potentially-cached
* MediaResource data, so that the state of the world can't change out from under
* us.
*/
template<class T>
class MOZ_RAII AutoPinned {
public:
explicit AutoPinned(T* aResource MOZ_GUARD_OBJECT_NOTIFIER_PARAM) : mResource(aResource) {
MOZ_GUARD_OBJECT_NOTIFIER_INIT;
MOZ_ASSERT(mResource);
mResource->Pin();
}
~AutoPinned() {
mResource->Unpin();
}
operator T*() const { return mResource; }
T* operator->() const MOZ_NO_ADDREF_RELEASE_ON_RETURN { return mResource; }
private:
T* mResource;
MOZ_DECL_USE_GUARD_OBJECT_NOTIFIER
};
DDLoggedTypeDeclName(MediaResourceIndex);
/*
* MediaResourceIndex provides a way to access MediaResource objects.
* Read, Seek and Tell must only be called on non-main threads.
* In the case of the Ogg Decoder they are called on the Decode thread for
* example. You must ensure that no threads are calling these methods once
* the MediaResource has been Closed.
*/
class MediaResourceIndex : public DecoderDoctorLifeLogger<MediaResourceIndex>
{
public:
explicit MediaResourceIndex(MediaResource* aResource);
// Read up to aCount bytes from the stream. The buffer must have
// enough room for at least aCount bytes. Stores the number of
// actual bytes read in aBytes (0 on end of file).
// May read less than aCount bytes if the number of
// available bytes is less than aCount. Always check *aBytes after
// read, and call again if necessary.
nsresult Read(char* aBuffer, uint32_t aCount, uint32_t* aBytes);
// Seek to the given bytes offset in the stream. aWhence can be
// one of:
// nsISeekableStream::NS_SEEK_SET
// nsISeekableStream::NS_SEEK_CUR
// nsISeekableStream::NS_SEEK_END
//
// In the Http strategy case the cancel will cause the http
// channel's listener to close the pipe, forcing an i/o error on any
// blocked read. This will allow the decode thread to complete the
// event.
//
// In the case of a seek in progress, the byte range request creates
// a new listener. This is done on the main thread via seek
// synchronously dispatching an event. This avoids the issue of us
// closing the listener but an outstanding byte range request
// creating a new one. They run on the same thread so no explicit
// synchronisation is required. The byte range request checks for
// the cancel flag and does not create a new channel or listener if
// we are cancelling.
//
// The default strategy does not do any seeking - the only issue is
// a blocked read which it handles by causing the listener to close
// the pipe, as per the http case.
//
// The file strategy doesn't block for any great length of time so
// is fine for a no-op cancel.
nsresult Seek(int32_t aWhence, int64_t aOffset);
// Report the current offset in bytes from the start of the stream.
int64_t Tell() const { return mOffset; }
// Return the underlying MediaResource.
MediaResource* GetResource() const { return mResource; }
// Read up to aCount bytes from the stream. The read starts at
// aOffset in the stream, seeking to that location initially if
// it is not the current stream offset.
// Unlike MediaResource::ReadAt, ReadAt only returns fewer bytes than
// requested if end of stream or an error is encountered. There is no need to
// call it again to get more data.
// If the resource has cached data past the end of the request, it will be
// used to fill a local cache, which should speed up consecutive ReadAt's
// (mostly by avoiding using the resource's IOs and locks.)
// *aBytes will contain the number of bytes copied, even if an error occurred.
// ReadAt doesn't have an impact on the offset returned by Tell().
nsresult ReadAt(int64_t aOffset,
char* aBuffer,
uint32_t aCount,
uint32_t* aBytes);
// Same as ReadAt, but doesn't try to cache around the read.
// Useful if you know that you will not read again from the same area.
nsresult UncachedReadAt(int64_t aOffset,
char* aBuffer,
uint32_t aCount,
uint32_t* aBytes) const;
// Similar to ReadAt, but doesn't try to cache around the read.
// Useful if you know that you will not read again from the same area.
// Will attempt to read aRequestedCount+aExtraCount, repeatedly calling
// MediaResource/ ReadAt()'s until a read returns 0 bytes (so we may actually
// get less than aRequestedCount bytes), or until we get at least
// aRequestedCount bytes (so we may not get any/all of the aExtraCount bytes.)
nsresult UncachedRangedReadAt(int64_t aOffset,
char* aBuffer,
uint32_t aRequestedCount,
uint32_t aExtraCount,
uint32_t* aBytes) const;
// This method returns nullptr if anything fails.
// Otherwise, it returns an owned buffer.
// MediaReadAt may return fewer bytes than requested if end of stream is
// encountered. There is no need to call it again to get more data.
// Note this method will not update mOffset.
already_AddRefed<MediaByteBuffer> MediaReadAt(int64_t aOffset,
uint32_t aCount) const;
already_AddRefed<MediaByteBuffer> CachedMediaReadAt(int64_t aOffset,
uint32_t aCount) const;
// Get the length of the stream in bytes. Returns -1 if not known.
// This can change over time; after a seek operation, a misbehaving
// server may give us a resource of a different length to what it had
// reported previously --- or it may just lie in its Content-Length
// header and give us more or less data than it reported. We will adjust
// the result of GetLength to reflect the data that's actually arriving.
int64_t GetLength() const;
private:
// If the resource has cached data past the requested range, try to grab it
// into our local cache.
// If there is no cached data, or attempting to read it fails, fallback on
// a (potentially-blocking) read of just what was requested, so that we don't
// get unexpected side-effects by trying to read more than intended.
nsresult CacheOrReadAt(int64_t aOffset,
char* aBuffer,
uint32_t aCount,
uint32_t* aBytes);
// Maps a file offset to a mCachedBlock index.
uint32_t IndexInCache(int64_t aOffsetInFile) const;
// Starting file offset of the cache block that contains a given file offset.
int64_t CacheOffsetContaining(int64_t aOffsetInFile) const;
RefPtr<MediaResource> mResource;
int64_t mOffset;
// Local cache used by ReadAt().
// mCachedBlock is valid when mCachedBytes != 0, in which case it contains
// data of length mCachedBytes, starting at offset `mCachedOffset` in the
// resource, located at index `IndexInCache(mCachedOffset)` in mCachedBlock.
//
// resource: |------------------------------------------------------|
// <----------> mCacheBlockSize
// <---------------------------------> mCachedOffset
// <--> mCachedBytes
// mCachedBlock: |..----....|
// CacheOffsetContaining(mCachedOffset) <--> IndexInCache(mCachedOffset)
// <------------------------------>
const uint32_t mCacheBlockSize;
int64_t mCachedOffset;
uint32_t mCachedBytes;
UniquePtr<char[]> mCachedBlock;
};
} // namespace mozilla
#endif