gecko-dev/gfx/doc
Ryan Hunt e34eeaaa86 Remove DisplayItemLayer and corresponding layers.advanced prefs. (bug 1439960, r=mstange)
MozReview-Commit-ID: FAWTC1Llu31

--HG--
extra : rebase_source : 05bda872389db5cc61e805c3eb48e70eb5d95cbe
2018-02-21 09:29:49 -06:00
..
AdvancedLayers.md Don't use constant buffers for ancillary vertex data. (bug 1379314 part 3, r=mattwoodrow) 2017-07-11 00:05:30 -07:00
AsyncPanZoom-HighLevel.png
AsyncPanZoom.md Bug 1302493 - Update the in-tree APZ documentation to reflect various changes since it was last updated. r=botond 2016-09-14 07:54:46 -04:00
GraphicsOverview.md
LayersHistory.md Bug 1235223 - Fix another typo in the layers history document. 2016-01-27 13:33:56 +01:00
MainPage.md
MozSurface.md
README.webrender Bug 1434288 - Update webrender to commit e772c3cb8ea0a35e6477e9dc8dd2144e2de87b56. r=jrmuizel 2018-01-31 16:03:25 -05:00
SharedMozSurface.md
Silk.md Bug 1336311 - Change code comments with http://hg.mozilla.org to https://. r=gps 2017-02-07 17:52:56 +01:00
silkArchitecture.png Bug 1134385. Silk documentation. r=kats 2015-04-20 17:28:25 -07:00

README.webrender

To build and run WebRender in Gecko:
1. Install Rust if you don't have it already
   If you are doing gecko builds already, you should already have Rust as it is a build requirement.
   If not, you can install it using |mach bootstrap| (recommended) or from https://www.rust-lang.org/
       Note: If installing manually, use the stable 64-bit release - on Windows make sure to use the MSVC ABI installer.
   Ensure that rustc and cargo are in your $PATH (adding $HOME/.cargo/bin/ should be sufficient)
2. Build using |mach build|.
   You don't need anything special in your mozconfig for local builds; webrender will be built by default.
   If you are building a non-nightly version (e.g. beta) you may need to add |ac_add_options --enable-webrender=build| to your mozconfig.
3. Run with |MOZ_WEBRENDER=1| in your environment. e.g. |MOZ_WEBRENDER=1 ./mach run|.
   Alternatively, you can set the gfx.webrender.enabled pref to true (browser restart required).
   Note that on Linux, acceleration is disabled by default and it needs to be enabled for WebRender to work.
   On Linux you can enable acceleration by putting |MOZ_ACCELERATED=1| in your environment, or setting layers.acceleration.force-enabled to true in about:config.
4. Verify WebRender is enabled. You can do this by going to about:support and checking the "Compositing" line in the Graphics section. It should say "WebRender".
   There should also be a WebRender section under "Decision Log" in about:support, which will provide some more detail on what caused it to be enabled/disabled.

When making changes:
    - Make the changes you want.
    - Run |mach build| or |mach build binaries| as desired.

For a debug webrender build:
    Use a debug mozconfig (ac_add_options --enable-debug)
    You can also use an opt build but make webrender less optimized by putting opt-level=0 in the [profile.release] section of your toolkit/library/rust/Cargo.toml file
    See also https://groups.google.com/forum/#!topic/mozilla.dev.servo/MbeMcqqO1fs

--------------------------------------------------------------------------------

What if you have to pull in an update to webrender itself? You have two options,
listed below. Both options will give you a set of patches and the ability to do
try pushes to verify the update. After that, continue with the steps below to
actually land the update into the tree.

Option A:
   Use a script to do the update for you. This will usually work, if you satisfy
   all the assumptions the script is making. The script can be found at
   https://github.com/staktrace/moz-scripts/blob/master/try-latest-webrender.sh
   and contains documentation on how to use it. Read the documentation carefully
   before trying to use it.

Option B:
   Do the update manually. This is a little more cumbersome but may be required
   if the script doesn't work or the repos are in a state that violates hidden
   assumptions in the script (e.g. if the webrender_bindings/Cargo.toml file is
   no longer in the format expected by the script). The steps to do this are,
   roughly:
   - Update your mozilla-central checkout to the latest code on mozilla-central.
   - Check out and update the webrender repo to the version you want
   - Copy over the webrender, webrender_api, and part of the wrench folders into
     gfx/. The best way to do this is to simply delete the gfx/webrender,
     gfx/webrender_api, and gfx/wrench folders and use |cp -R| to copy them in
     again from the webrender repo, and then delete the gfx/wrench/reftests,
     gfx/wrench/benchmarks, and gfx/wrench/script folders. Update the revision
     in gfx/webrender_bindings/revision.txt file with the git changeset hash.
   - If you need to modify webrender_bindings/Cargo.toml file, do so now. Changes
     at this step usually consist of:
     (a) Updating version numbers. Go through the version numbers of ALL the
         dependencies in the Cargo.toml file (webrender, euclid, etc.) and make
         sure the version numbers listed match what's in the new
         gfx/webrender/Cargo.toml and gfx/webrender_api/Cargo.toml files.
     (b) Turning on or off any new features that were added in upstream WR. This
         used to happen a lot but is pretty rare now.
   - Go to toolkit/library/rust and run |cargo update -p webrender -p webrender_api|.
     If it complains about version numbers of other crates not lining up, add those
     as well, e.g. |cargo update -p webrender -p webrender_api -p gleam -p euclid|.
     You may need to do this a few times until you get all the crates to make it
     happy.
   - Run the same cargo update command from the previous step in the
     toolkit/library/gtest/rust folder.
   - Commit your changes locally. You'll need to do this before the next step or
     it will complain.
   - At the top of the tree, run |mach vendor rust| to update the rust
     dependencies in third_party/rust.
   - Commit your changes locally.
   - Build and test. You may need to make changes in bindings.rs or on the C++
     side depending on what changed in webrender. This can potentially be quite
     tricky if you don't fully understand the API changes on the webrender side.
     Get help if you need it. For simplicity in bisecting, try to not use your
     new features yet, just get the build working with the minimal changes.
   - Commit any changes from the previous step, and do a try push to make sure
     everything is good. Generally we do two try pushes, one for builds and
     linux tests. This should be totally green. The other forces WR enabled on
     Windows and runs reftests, which currently fails. However if it fails with
     more than just regular reftest failures (e.g. it crashes or has an assertion
     failure) then that's potentially going to be a problem for Windows users
     running WebRender and will need investigation.
   - You now have an updated webrender, so you can land it or write gecko
     code against the new features.

Once you have followed either Option A or Option B and have a good update, you
might want to land it in the tree. To do this:
- Find the current wr-future-update bug, by going to https://bugzil.la/wr-future-update
- Clone this bug (there is a little dropdown in the bottom right corner of the
  page which gives you an option to "Create a new bug ... as a clone of this bug").
- This will take you to a bug entry page with some stuff prepopulated. Do NOT
  submit it yet, but make the following changes:
  (a) Modify the "Description" to remove the SECOND instance of the text "+++ This
      bug was initially created as a clone of ... +++". Keep the first instance
      as it points to the bug you just cloned, and keep the rest of the text unless
      you feel it needs changing.
  (b) Add wr-future-update into the "Alias" field
  (c) Clear the bugs in the "Depends on" field
  (d) For each bug in the "Blocks" field, except for 1311790 and 1386670, go
      to the bug and check the "See Also" link for the corresponding WR issue/PR,
      if any. If there is a WR issue that is not yet resolved in the update you
      are landing, leave the bug in the "Blocks" field of your clone. In a later
      step you will remove the dependency from the update you are landing. At
      end of this step the "Blocks" field should contain 1311790, 1386670, and
      any bugs tracking upstream WR issues that are not fixed in the update.
  (e) You still cannot submit the clone as a new bug, because you can't have two
      bugs in the system with the same alias. So hold on a sec.
- Go back to the tab with the current wr-future-update bug, and click on the edit
  button. Make the following changes:
  (a) Assign the bug to yourself.
  (b) Clear the "Alias" field.
  (c) Remove bugs from the "Blocks" field that you kept in step (d), other than
      1311790 and 1386670. In other words, update the "Blocks" field so that it
      contains 1311790, 1386670, and any bugs that are actually fixed by the
      update.
  (d) Submit your changes to this bug.
- Now you can submit your changes to the clone bug which will create a new
  wr-future-update bug.
- Update your patch queue so that the patches are properly formatted with
  bug number, reviewer, etc. and push to MozReview. This is kind of important,
  because you want these patches to land on autoland rather than inbound. If it
  lands on inbound there's a high chance of it conflicting with the servo-vcs-sync
  bot that is regularly pushing to autoland, and then you'll only find out about
  it when the sheriff tries to do a merge and backs you out. If you push to
  autoland you're likely to find out about the problem at push time, when the
  patches won't rebase.


Troubleshooting tips:

1. Note that when webrender is built as part of gecko, it may end up using slightly
   different versions of its dependencies than when it is built standalone from the
   webrender repo. The reason is that the Cargo.lock files in m-c and in the WR
   repo may reference different versions of the dependencies. Both builds will be
   compatible in terms of semantic versioning, but may produce different results -
   for example the standalone webrender might use euclid 0.10.4 while the
   one in gecko uses euclid 0.10.3. Although both choices are "valid" per
   the semantic versioning rules in webrender's Cargo.toml, the 0.2.3 may provide
   a bugfix that is needed for correct behaviour in webrender. If this is the case,
   the technically "correct" fix is to change the upstream webrender Cargo.toml
   file to require the correct version. Alternnatively, you can update the
   Cargo.lock files in m-c to pull in the new version. The way to do this is as
   follows:
   - Go to toolkit/library/rust and run |cargo update -p <package> --precise <version>|.
     Repeat this for as many libraries as you need to update. Run the same commands
     in toolkit/library/gtest/rust and js/src (ignore any errors about unmatched
     packages). Commit all the changes locally.
   - Run |mach vendor rust|, which will update the corresponding libraries in
     third_party/rust to the versions you specified.
   The reason we don't do this by default is to work around bug 1336528. Specifically,
   there is another crate in m-c called mozjs_sys which is built separately but uses
   the same folder to store its rust dependencies. If one of the libraries that is
   required by both mozjs_sys and webrender is updated without updating the other
   project's Cargo.lock file, that results in build bustage.
   This means that any time you do this sort of manual update of packages, you need
   to make sure that mozjs_sys also has its Cargo.lock file updated if needed, hence
   the need to run the cargo update command in js/src as well. Hopefully this will
   be resolved soon.

2. Sometimes autoland tip has changed enough from mozilla-central (because of the
   servo vcs-sync-bot, which will sync servo into m-c and often re-vendor third-
   party rust dependencies) that trying to land an update based on mozilla-central
   will not work well. As in, you'll get conflicts in Cargo.lock files or in the
   third_party/rust directory. This is best handled by running your update steps
   on top of autoland tip rather than central. (The script-based update in option A
   has an env var you can set to do this). In theory you can get the same
   result by resolving the conflict manually but Cargo.lock files are usually not
   trivial to merge by hand. If it's just the third_party/rust dir that has conflicts
   you can delete it and run |mach vendor rust| again to repopulate it.

-------------------------------------------------------------------------------

The current WebRender revision can be found in gfx/webrender_bindings/revision.txt file.