gecko-dev/netwerk/streamconv/test/TestStreamConv.cpp

285 строки
11 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsIServiceManager.h"
#include "nsIComponentManager.h"
#include "nsIComponentRegistrar.h"
#include "nsIStreamConverterService.h"
#include "nsIStreamConverter.h"
#include "nsICategoryManager.h"
#include "nsIFactory.h"
#include "nsIStringStream.h"
#include "nsCOMPtr.h"
#include "nsNetUtil.h"
#include "nsThreadUtils.h"
#include "nspr.h"
#define ASYNC_TEST // undefine this if you want to test sycnronous conversion.
/////////////////////////////////
// Event pump setup
/////////////////////////////////
#ifdef XP_WIN
#include <windows.h>
#endif
#ifdef XP_OS2
#include <os2.h>
#endif
static int gKeepRunning = 0;
/////////////////////////////////
// Event pump END
/////////////////////////////////
/////////////////////////////////
// Test converters include
/////////////////////////////////
#include "Converters.h"
// CID setup
static NS_DEFINE_CID(kStreamConverterServiceCID, NS_STREAMCONVERTERSERVICE_CID);
////////////////////////////////////////////////////////////////////////
// EndListener - This listener is the final one in the chain. It
// receives the fully converted data, although it doesn't do anything with
// the data.
////////////////////////////////////////////////////////////////////////
class EndListener : public nsIStreamListener {
public:
// nsISupports declaration
NS_DECL_ISUPPORTS
EndListener() {};
// nsIStreamListener method
NS_IMETHOD OnDataAvailable(nsIRequest* request, nsISupports *ctxt, nsIInputStream *inStr,
PRUint32 sourceOffset, PRUint32 count)
{
nsresult rv;
PRUint32 read, len;
rv = inStr->Available(&len);
if (NS_FAILED(rv)) return rv;
char *buffer = (char*)nsMemory::Alloc(len + 1);
if (!buffer) return NS_ERROR_OUT_OF_MEMORY;
rv = inStr->Read(buffer, len, &read);
buffer[len] = '\0';
if (NS_SUCCEEDED(rv)) {
printf("CONTEXT %p: Received %u bytes and the following data: \n %s\n\n", ctxt, read, buffer);
}
nsMemory::Free(buffer);
return NS_OK;
}
// nsIRequestObserver methods
NS_IMETHOD OnStartRequest(nsIRequest* request, nsISupports *ctxt) { return NS_OK; }
NS_IMETHOD OnStopRequest(nsIRequest* request, nsISupports *ctxt,
nsresult aStatus) { return NS_OK; }
};
NS_IMPL_ISUPPORTS1(EndListener, nsIStreamListener)
////////////////////////////////////////////////////////////////////////
// EndListener END
////////////////////////////////////////////////////////////////////////
nsresult SendData(const char * aData, nsIStreamListener* aListener, nsIRequest* request) {
nsresult rv;
nsCOMPtr<nsIStringInputStream> dataStream
(do_CreateInstance("@mozilla.org/io/string-input-stream;1", &rv));
NS_ENSURE_SUCCESS(rv, rv);
rv = dataStream->SetData(aData, strlen(aData));
NS_ENSURE_SUCCESS(rv, rv);
PRUint32 avail;
dataStream->Available(&avail);
return aListener->OnDataAvailable(request, nsnull, dataStream, 0, avail);
}
#define SEND_DATA(x) SendData(x, converterListener, request)
int
main(int argc, char* argv[])
{
nsresult rv;
{
nsCOMPtr<nsIServiceManager> servMan;
NS_InitXPCOM2(getter_AddRefs(servMan), nsnull, nsnull);
nsCOMPtr<nsIComponentRegistrar> registrar = do_QueryInterface(servMan);
NS_ASSERTION(registrar, "Null nsIComponentRegistrar");
if (registrar)
registrar->AutoRegister(nsnull);
nsCOMPtr<nsIThread> thread = do_GetCurrentThread();
nsCOMPtr<nsICategoryManager> catman =
do_GetService(NS_CATEGORYMANAGER_CONTRACTID, &rv);
if (NS_FAILED(rv)) return rv;
nsCString previous;
///////////////////////////////////////////
// BEGIN - Stream converter registration
// All stream converters must register with the ComponentManager
///////////////////////////////////////////
// these stream converters are just for testing. running this harness
// from the dist/bin dir will also pickup converters registered
// in other modules (necko converters for example).
PRUint32 converterListSize = 7;
const char *const converterList[] = {
"?from=a/foo&to=b/foo",
"?from=b/foo&to=c/foo",
"?from=b/foo&to=d/foo",
"?from=c/foo&to=d/foo",
"?from=d/foo&to=e/foo",
"?from=d/foo&to=f/foo",
"?from=t/foo&to=k/foo",
};
TestConverterFactory *convFactory = new TestConverterFactory(kTestConverterCID, "TestConverter", NS_ISTREAMCONVERTER_KEY);
nsCOMPtr<nsIFactory> convFactSup(do_QueryInterface(convFactory, &rv));
if (NS_FAILED(rv)) return rv;
for (PRUint32 count = 0; count < converterListSize; ++count) {
// register the TestConverter with the component manager. One contractid registration
// per conversion pair (from - to pair).
nsCString contractID(NS_ISTREAMCONVERTER_KEY);
contractID.Append(converterList[count]);
rv = registrar->RegisterFactory(kTestConverterCID,
"TestConverter",
contractID.get(),
convFactSup);
if (NS_FAILED(rv)) return rv;
rv = catman->AddCategoryEntry(NS_ISTREAMCONVERTER_KEY, converterList[count], "x",
PR_TRUE, PR_TRUE, getter_Copies(previous));
if (NS_FAILED(rv)) return rv;
}
nsCOMPtr<nsIStreamConverterService> StreamConvService =
do_GetService(kStreamConverterServiceCID, &rv);
if (NS_FAILED(rv)) return rv;
// Define the *from* content type and *to* content-type for conversion.
static const char fromStr[] = "a/foo";
static const char toStr[] = "c/foo";
#ifdef ASYNC_TEST
// ASYNCHRONOUS conversion
// Build up a channel that represents the content we're
// starting the transaction with.
//
// sample multipart mixed content-type string:
// "multipart/x-mixed-replacE;boundary=thisrandomstring"
#if 0
nsCOMPtr<nsIChannel> channel;
nsCOMPtr<nsIURI> dummyURI;
rv = NS_NewURI(getter_AddRefs(dummyURI), "http://meaningless");
if (NS_FAILED(rv)) return rv;
rv = NS_NewInputStreamChannel(getter_AddRefs(channel),
dummyURI,
nsnull, // inStr
"text/plain", // content-type
-1); // XXX fix contentLength
if (NS_FAILED(rv)) return rv;
nsCOMPtr<nsIRequest> request(do_QueryInterface(channel));
#endif
nsCOMPtr<nsIRequest> request;
// setup a listener to receive the converted data. This guy is the end
// listener in the chain, he wants the fully converted (toType) data.
// An example of this listener in mozilla would be the DocLoader.
nsIStreamListener *dataReceiver = new EndListener();
NS_ADDREF(dataReceiver);
// setup a listener to push the data into. This listener sits inbetween the
// unconverted data of fromType, and the final listener in the chain (in this case
// the dataReceiver.
nsIStreamListener *converterListener = nsnull;
rv = StreamConvService->AsyncConvertData(fromStr, toStr,
dataReceiver, nsnull, &converterListener);
if (NS_FAILED(rv)) return rv;
NS_RELEASE(dataReceiver);
// at this point we have a stream listener to push data to, and the one
// that will receive the converted data. Let's mimic On*() calls and get the conversion
// going. Typically these On*() calls would be made inside their respective wrappers On*()
// methods.
rv = converterListener->OnStartRequest(request, nsnull);
if (NS_FAILED(rv)) return rv;
rv = SEND_DATA("aaa");
if (NS_FAILED(rv)) return rv;
rv = SEND_DATA("aaa");
if (NS_FAILED(rv)) return rv;
// Finish the request.
rv = converterListener->OnStopRequest(request, nsnull, rv);
if (NS_FAILED(rv)) return rv;
NS_RELEASE(converterListener);
#else
// SYNCHRONOUS conversion
nsCOMPtr<nsIInputStream> convertedData;
rv = StreamConvService->Convert(inputData, fromStr, toStr,
nsnull, getter_AddRefs(convertedData));
if (NS_FAILED(rv)) return rv;
#endif
// Enter the message pump to allow the URL load to proceed.
while ( gKeepRunning ) {
if (!NS_ProcessNextEvent(thread))
break;
}
} // this scopes the nsCOMPtrs
// no nsCOMPtrs are allowed to be alive when you call NS_ShutdownXPCOM
NS_ShutdownXPCOM(nsnull);
return rv;
}