gecko-dev/widget/xpwidgets/nsBaseAppShell.cpp

401 строка
12 KiB
C++

/* -*- Mode: c++; tab-width: 2; indent-tabs-mode: nil; -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Widget code.
*
* The Initial Developer of the Original Code is Google Inc.
* Portions created by the Initial Developer are Copyright (C) 2006
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Darin Fisher <darin@meer.net> (original author)
* Mats Palmgren <mats.palmgren@bredband.net>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "base/message_loop.h"
#include "nsBaseAppShell.h"
#include "nsThreadUtils.h"
#include "nsIObserverService.h"
#include "nsServiceManagerUtils.h"
#include "mozilla/Services.h"
// When processing the next thread event, the appshell may process native
// events (if not in performance mode), which can result in suppressing the
// next thread event for at most this many ticks:
#define THREAD_EVENT_STARVATION_LIMIT PR_MillisecondsToInterval(20)
NS_IMPL_THREADSAFE_ISUPPORTS3(nsBaseAppShell, nsIAppShell, nsIThreadObserver,
nsIObserver)
nsBaseAppShell::nsBaseAppShell()
: mSuspendNativeCount(0)
, mEventloopNestingLevel(0)
, mBlockedWait(nsnull)
, mFavorPerf(0)
, mNativeEventPending(0)
, mStarvationDelay(0)
, mSwitchTime(0)
, mLastNativeEventTime(0)
, mEventloopNestingState(eEventloopNone)
, mRunning(false)
, mExiting(false)
, mBlockNativeEvent(false)
{
}
nsBaseAppShell::~nsBaseAppShell()
{
NS_ASSERTION(mSyncSections.Count() == 0, "Must have run all sync sections");
}
nsresult
nsBaseAppShell::Init()
{
// Configure ourselves as an observer for the current thread:
nsCOMPtr<nsIThreadInternal> threadInt =
do_QueryInterface(NS_GetCurrentThread());
NS_ENSURE_STATE(threadInt);
threadInt->SetObserver(this);
nsCOMPtr<nsIObserverService> obsSvc =
mozilla::services::GetObserverService();
if (obsSvc)
obsSvc->AddObserver(this, NS_XPCOM_SHUTDOWN_OBSERVER_ID, false);
return NS_OK;
}
// Called by nsAppShell's native event callback
void
nsBaseAppShell::NativeEventCallback()
{
PRInt32 hasPending = PR_ATOMIC_SET(&mNativeEventPending, 0);
if (hasPending == 0)
return;
// If DoProcessNextNativeEvent is on the stack, then we assume that we can
// just unwind and let nsThread::ProcessNextEvent process the next event.
// However, if we are called from a nested native event loop (maybe via some
// plug-in or library function), then go ahead and process Gecko events now.
if (mEventloopNestingState == eEventloopXPCOM) {
mEventloopNestingState = eEventloopOther;
// XXX there is a tiny risk we will never get a new NativeEventCallback,
// XXX see discussion in bug 389931.
return;
}
// nsBaseAppShell::Run is not being used to pump events, so this may be
// our only opportunity to process pending gecko events.
nsIThread *thread = NS_GetCurrentThread();
bool prevBlockNativeEvent = mBlockNativeEvent;
if (mEventloopNestingState == eEventloopOther) {
if (!NS_HasPendingEvents(thread))
return;
// We're in a nested native event loop and have some gecko events to
// process. While doing that we block processing native events from the
// appshell - instead, we want to get back to the nested native event
// loop ASAP (bug 420148).
mBlockNativeEvent = true;
}
++mEventloopNestingLevel;
EventloopNestingState prevVal = mEventloopNestingState;
NS_ProcessPendingEvents(thread, THREAD_EVENT_STARVATION_LIMIT);
mProcessedGeckoEvents = true;
mEventloopNestingState = prevVal;
mBlockNativeEvent = prevBlockNativeEvent;
// Continue processing pending events later (we don't want to starve the
// embedders event loop).
if (NS_HasPendingEvents(thread))
DoProcessMoreGeckoEvents();
--mEventloopNestingLevel;
}
// Note, this is currently overidden on windows, see comments in nsAppShell for
// details.
void
nsBaseAppShell::DoProcessMoreGeckoEvents()
{
OnDispatchedEvent(nsnull);
}
// Main thread via OnProcessNextEvent below
bool
nsBaseAppShell::DoProcessNextNativeEvent(bool mayWait)
{
// The next native event to be processed may trigger our NativeEventCallback,
// in which case we do not want it to process any thread events since we'll
// do that when this function returns.
//
// If the next native event is not our NativeEventCallback, then we may end
// up recursing into this function.
//
// However, if the next native event is not our NativeEventCallback, but it
// results in another native event loop, then our NativeEventCallback could
// fire and it will see mEventloopNestingState as eEventloopOther.
//
EventloopNestingState prevVal = mEventloopNestingState;
mEventloopNestingState = eEventloopXPCOM;
++mEventloopNestingLevel;
bool result = ProcessNextNativeEvent(mayWait);
--mEventloopNestingLevel;
mEventloopNestingState = prevVal;
return result;
}
//-------------------------------------------------------------------------
// nsIAppShell methods:
NS_IMETHODIMP
nsBaseAppShell::Run(void)
{
NS_ENSURE_STATE(!mRunning); // should not call Run twice
mRunning = true;
nsIThread *thread = NS_GetCurrentThread();
MessageLoop::current()->Run();
NS_ProcessPendingEvents(thread);
mRunning = false;
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::Exit(void)
{
if (mRunning && !mExiting) {
MessageLoop::current()->Quit();
}
mExiting = true;
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::FavorPerformanceHint(bool favorPerfOverStarvation,
PRUint32 starvationDelay)
{
mStarvationDelay = PR_MillisecondsToInterval(starvationDelay);
if (favorPerfOverStarvation) {
++mFavorPerf;
} else {
--mFavorPerf;
mSwitchTime = PR_IntervalNow();
}
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::SuspendNative()
{
++mSuspendNativeCount;
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::ResumeNative()
{
--mSuspendNativeCount;
NS_ASSERTION(mSuspendNativeCount >= 0, "Unbalanced call to nsBaseAppShell::ResumeNative!");
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::GetEventloopNestingLevel(PRUint32* aNestingLevelResult)
{
NS_ENSURE_ARG_POINTER(aNestingLevelResult);
*aNestingLevelResult = mEventloopNestingLevel;
return NS_OK;
}
//-------------------------------------------------------------------------
// nsIThreadObserver methods:
// Called from any thread
NS_IMETHODIMP
nsBaseAppShell::OnDispatchedEvent(nsIThreadInternal *thr)
{
if (mBlockNativeEvent)
return NS_OK;
PRInt32 lastVal = PR_ATOMIC_SET(&mNativeEventPending, 1);
if (lastVal == 1)
return NS_OK;
// Returns on the main thread in NativeEventCallback above
ScheduleNativeEventCallback();
return NS_OK;
}
// Called from the main thread
NS_IMETHODIMP
nsBaseAppShell::OnProcessNextEvent(nsIThreadInternal *thr, bool mayWait,
PRUint32 recursionDepth)
{
if (mBlockNativeEvent) {
if (!mayWait)
return NS_OK;
// Hmm, we're in a nested native event loop and would like to get
// back to it ASAP, but it seems a gecko event has caused us to
// spin up a nested XPCOM event loop (eg. modal window), so we
// really must start processing native events here again.
mBlockNativeEvent = false;
if (NS_HasPendingEvents(thr))
OnDispatchedEvent(thr); // in case we blocked it earlier
}
PRIntervalTime start = PR_IntervalNow();
PRIntervalTime limit = THREAD_EVENT_STARVATION_LIMIT;
// Unblock outer nested wait loop (below).
if (mBlockedWait)
*mBlockedWait = false;
bool *oldBlockedWait = mBlockedWait;
mBlockedWait = &mayWait;
// When mayWait is true, we need to make sure that there is an event in the
// thread's event queue before we return. Otherwise, the thread will block
// on its event queue waiting for an event.
bool needEvent = mayWait;
// Reset prior to invoking DoProcessNextNativeEvent which might cause
// NativeEventCallback to process gecko events.
mProcessedGeckoEvents = false;
if (mFavorPerf <= 0 && start > mSwitchTime + mStarvationDelay) {
// Favor pending native events
PRIntervalTime now = start;
bool keepGoing;
do {
mLastNativeEventTime = now;
keepGoing = DoProcessNextNativeEvent(false);
} while (keepGoing && ((now = PR_IntervalNow()) - start) < limit);
} else {
// Avoid starving native events completely when in performance mode
if (start - mLastNativeEventTime > limit) {
mLastNativeEventTime = start;
DoProcessNextNativeEvent(false);
}
}
while (!NS_HasPendingEvents(thr) && !mProcessedGeckoEvents) {
// If we have been asked to exit from Run, then we should not wait for
// events to process. Note that an inner nested event loop causes
// 'mayWait' to become false too, through 'mBlockedWait'.
if (mExiting)
mayWait = false;
mLastNativeEventTime = PR_IntervalNow();
if (!DoProcessNextNativeEvent(mayWait) || !mayWait)
break;
}
mBlockedWait = oldBlockedWait;
// Make sure that the thread event queue does not block on its monitor, as
// it normally would do if it did not have any pending events. To avoid
// that, we simply insert a dummy event into its queue during shutdown.
if (needEvent && !mExiting && !NS_HasPendingEvents(thr)) {
if (!mDummyEvent)
mDummyEvent = new nsRunnable();
thr->Dispatch(mDummyEvent, NS_DISPATCH_NORMAL);
}
// We're about to run an event, so we're in a stable state.
RunSyncSections();
return NS_OK;
}
void
nsBaseAppShell::RunSyncSections()
{
if (mSyncSections.Count() == 0) {
return;
}
// We've got synchronous sections awaiting a stable state. Run
// all the synchronous sections. Note that a synchronous section could
// add another synchronous section, so we don't remove elements from
// mSyncSections until all sections have been run, else we'll screw up
// our iteration.
for (PRInt32 i = 0; i < mSyncSections.Count(); i++) {
mSyncSections[i]->Run();
}
mSyncSections.Clear();
}
// Called from the main thread
NS_IMETHODIMP
nsBaseAppShell::AfterProcessNextEvent(nsIThreadInternal *thr,
PRUint32 recursionDepth)
{
// We've just finished running an event, so we're in a stable state.
RunSyncSections();
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::Observe(nsISupports *subject, const char *topic,
const PRUnichar *data)
{
NS_ASSERTION(!strcmp(topic, NS_XPCOM_SHUTDOWN_OBSERVER_ID), "oops");
Exit();
return NS_OK;
}
NS_IMETHODIMP
nsBaseAppShell::RunInStableState(nsIRunnable* aRunnable)
{
NS_ASSERTION(NS_IsMainThread(), "Should be on main thread.");
// Record the synchronous section, and run it with any others once
// we reach a stable state.
mSyncSections.AppendObject(aRunnable);
// Ensure we've got a pending event, else the callbacks will never run.
nsIThread* thread = NS_GetCurrentThread();
if (!NS_HasPendingEvents(thread) &&
NS_FAILED(thread->Dispatch(new nsRunnable(), NS_DISPATCH_NORMAL)))
{
// Failed to dispatch dummy event to cause sync sections to run, thread
// is probably done processing events, just run the sync sections now.
RunSyncSections();
}
return NS_OK;
}