mozilla
/
gecko-dev
зеркало из https://github.com/mozilla/gecko-dev.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
gecko-dev/dom/system/gonk/AutoMounter.cpp

1507 строки
47 KiB
C++
Исходник Ответственный История

/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this file,
* You can obtain one at http://mozilla.org/MPL/2.0/. */
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
#include <sys/statfs.h>
#include <arpa/inet.h>
#include <linux/types.h>
#include <linux/netlink.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <android/log.h>
#include <cutils/properties.h>
#include "AutoMounter.h"
#include "nsVolumeService.h"
#include "AutoMounterSetting.h"
#include "base/message_loop.h"
#include "mozilla/AutoRestore.h"
#include "mozilla/FileUtils.h"
#include "mozilla/Hal.h"
#include "mozilla/StaticPtr.h"
#include "MozMtpServer.h"
#include "MozMtpStorage.h"
#include "nsAutoPtr.h"
#include "nsCharSeparatedTokenizer.h"
#include "nsMemory.h"
#include "nsString.h"
#include "nsThreadUtils.h"
#include "nsXULAppAPI.h"
#include "OpenFileFinder.h"
#include "Volume.h"
#include "VolumeManager.h"
#include "nsIStatusReporter.h"
USING_MTP_NAMESPACE
/**************************************************************************
*
* The following "switch" files are available for monitoring usb
* connections:
*
* /sys/devices/virtual/switch/usb_connected/state
* /sys/devices/virtual/switch/usb_configuration/state
*
* Under gingerbread, only the usb_configuration seems to be available.
* Starting with honeycomb, usb_connected was also added.
*
* When a cable insertion/removal occurs, then a uevent similar to the
* following will be generted:
*
* change@/devices/virtual/switch/usb_configuration
* ACTION=change
* DEVPATH=/devices/virtual/switch/usb_configuration
* SUBSYSTEM=switch
* SWITCH_NAME=usb_configuration
* SWITCH_STATE=0
* SEQNUM=5038
*
* SWITCH_STATE will be 0 after a removal and 1 after an insertion
*
**************************************************************************/
#define USB_CONFIGURATION_SWITCH_NAME NS_LITERAL_STRING("usb_configuration")
#define GB_SYS_UMS_ENABLE "/sys/devices/virtual/usb_composite/usb_mass_storage/enable"
#define GB_SYS_USB_CONFIGURED "/sys/devices/virtual/switch/usb_configuration/state"
#define ICS_SYS_USB_FUNCTIONS "/sys/devices/virtual/android_usb/android0/functions"
#define ICS_SYS_UMS_DIRECTORY "/sys/devices/virtual/android_usb/android0/f_mass_storage"
#define ICS_SYS_MTP_DIRECTORY "/sys/devices/virtual/android_usb/android0/f_mtp"
#define ICS_SYS_USB_STATE "/sys/devices/virtual/android_usb/android0/state"
#undef USE_DEBUG // MozMtpDatabase.h also defines USE_DEBUG
#define USE_DEBUG 0
#undef LOG
#undef LOGW
#undef ERR
#define LOG(args...) __android_log_print(ANDROID_LOG_INFO, "AutoMounter", ## args)
#define LOGW(args...) __android_log_print(ANDROID_LOG_WARN, "AutoMounter", ## args)
#define ERR(args...) __android_log_print(ANDROID_LOG_ERROR, "AutoMounter", ## args)
#undef DBG
#if USE_DEBUG
#define DBG(args...) __android_log_print(ANDROID_LOG_DEBUG, "AutoMounter" , ## args)
#else
#define DBG(args...)
#endif
namespace mozilla {
namespace system {
#define SYS_USB_CONFIG "sys.usb.config"
#define PERSIST_SYS_USB_CONFIG "persist.sys.usb.config"
#define USB_FUNC_ADB "adb"
#define USB_FUNC_MTP "mtp"
#define USB_FUNC_NONE "none"
#define USB_FUNC_RNDIS "rndis"
#define USB_FUNC_UMS "mass_storage"
#define USB_FUNC_DEFAULT "default"
class AutoMounter;
static void SetAutoMounterStatus(int32_t aStatus);
/***************************************************************************/
inline const char* SwitchStateStr(const hal::SwitchEvent& aEvent)
{
return aEvent.status() == hal::SWITCH_STATE_ON ? "plugged" : "unplugged";
}
/***************************************************************************/
static bool
IsUsbCablePluggedIn()
{
#if 0
// Use this code when bug 745078 gets fixed (or use whatever the
// appropriate method is)
return GetCurrentSwitchEvent(SWITCH_USB) == hal::SWITCH_STATE_ON;
#else
// Until then, just go read the file directly
if (access(ICS_SYS_USB_STATE, F_OK) == 0) {
char usbState[20];
if (ReadSysFile(ICS_SYS_USB_STATE, usbState, sizeof(usbState))) {
DBG("IsUsbCablePluggedIn: state = '%s'", usbState);
return strcmp(usbState, "CONFIGURED") == 0 ||
strcmp(usbState, "CONNECTED") == 0;
}
ERR("Error reading file '%s': %s", ICS_SYS_USB_STATE, strerror(errno));
return false;
}
bool configured;
if (ReadSysFile(GB_SYS_USB_CONFIGURED, &configured)) {
return configured;
}
ERR("Error reading file '%s': %s", GB_SYS_USB_CONFIGURED, strerror(errno));
return false;
#endif
}
static bool
IsUsbConfigured()
{
if (access(ICS_SYS_USB_STATE, F_OK) == 0) {
char usbState[20];
if (ReadSysFile(ICS_SYS_USB_STATE, usbState, sizeof(usbState))) {
DBG("IsUsbConfigured: state = '%s'", usbState);
return strcmp(usbState, "CONFIGURED") == 0;
}
ERR("Error reading file '%s': %s", ICS_SYS_USB_STATE, strerror(errno));
return false;
}
bool configured;
if (ReadSysFile(GB_SYS_USB_CONFIGURED, &configured)) {
return configured;
}
ERR("Error reading file '%s': %s", GB_SYS_USB_CONFIGURED, strerror(errno));
return false;
}
/***************************************************************************/
// The AutoVolumeManagerStateObserver allows the AutoMounter to know when
// the volume manager changes state (i.e. it has finished initialization)
class AutoVolumeManagerStateObserver : public VolumeManager::StateObserver
{
public:
virtual void Notify(const VolumeManager::StateChangedEvent& aEvent);
};
// The AutoVolumeEventObserver allows the AutoMounter to know about card
// insertion and removal, as well as state changes in the volume.
class AutoVolumeEventObserver : public Volume::EventObserver
{
public:
virtual void Notify(Volume* const& aEvent);
};
class AutoMounterResponseCallback : public VolumeResponseCallback
{
public:
AutoMounterResponseCallback()
: mErrorCount(0)
{
}
protected:
virtual void ResponseReceived(const VolumeCommand* aCommand);
private:
const static int kMaxErrorCount = 3; // Max number of errors before we give up
int mErrorCount;
};
/***************************************************************************/
class AutoMounter
{
public:
NS_INLINE_DECL_REFCOUNTING(AutoMounter)
typedef nsTArray<RefPtr<Volume>> VolumeArray;
AutoMounter()
: mState(STATE_IDLE),
mResponseCallback(new AutoMounterResponseCallback),
mMode(AUTOMOUNTER_DISABLE)
{
VolumeManager::RegisterStateObserver(&mVolumeManagerStateObserver);
Volume::RegisterVolumeObserver(&mVolumeEventObserver, "AutoMounter");
// It's possible that the VolumeManager is already in the READY state,
// so we call CheckVolumeSettings here to cover that case. Otherwise,
// we'll pick it up when the VolumeManage state changes to VOLUMES_READY.
CheckVolumeSettings();
DBG("Calling UpdateState from constructor");
UpdateState();
}
void CheckVolumeSettings()
{
if (VolumeManager::State() != VolumeManager::VOLUMES_READY) {
DBG("CheckVolumeSettings: VolumeManager is NOT READY yet");
return;
}
DBG("CheckVolumeSettings: VolumeManager is READY");
// The VolumeManager knows about all of the volumes from vold. We now
// know the names of all of the volumes, so we can find out what the
// initial sharing settings are set to.
VolumeManager::VolumeArray::size_type numVolumes = VolumeManager::NumVolumes();
VolumeManager::VolumeArray::index_type i;
for (i = 0; i < numVolumes; i++) {
RefPtr<Volume> vol = VolumeManager::GetVolume(i);
if (vol) {
// We need to pick up the intial value of the
// ums.volume.NAME.enabled setting.
AutoMounterSetting::CheckVolumeSettings(vol->Name());
// Note: eventually CheckVolumeSettings will call
// AutoMounter::SetSharingMode, which will in turn call
// UpdateState if needed.
}
}
}
void UpdateState();
void GetStatus(bool& umsAvail, bool& umsConfigured, bool& umsEnabled, bool& mtpAvail,
bool& mtpConfigured, bool& mtpEnabled, bool& rndisConfigured);
nsresult Dump(nsACString& desc);
void ConfigureUsbFunction(const char* aUsbFunc);
bool StartMtpServer();
void StopMtpServer();
void StartUmsSharing();
void StopUmsSharing();
const char* ModeStr(int32_t aMode)
{
switch (aMode) {
case AUTOMOUNTER_DISABLE: return "Disable";
case AUTOMOUNTER_ENABLE_UMS: return "Enable-UMS";
case AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED: return "DisableWhenUnplugged";
case AUTOMOUNTER_ENABLE_MTP: return "Enable-MTP";
}
return "??? Unknown ???";
}
bool IsModeEnabled(int32_t aMode)
{
return aMode == AUTOMOUNTER_ENABLE_MTP ||
aMode == AUTOMOUNTER_ENABLE_UMS;
}
void SetMode(int32_t aMode)
{
if ((aMode == AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED) &&
(mMode == AUTOMOUNTER_DISABLE)) {
// If it's already disabled, then leave it as disabled.
// AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED implies "enabled until unplugged"
aMode = AUTOMOUNTER_DISABLE;
}
if (aMode == AUTOMOUNTER_DISABLE &&
mMode == AUTOMOUNTER_ENABLE_UMS && IsUsbCablePluggedIn()) {
// On many devices (esp non-Samsung), we can't force the disable, so we
// need to defer until the USB cable is actually unplugged.
// See bug 777043.
//
// Otherwise our attempt to disable it will fail, and we'll wind up in a bad
// state where the AutoMounter thinks that Sharing has been turned off, but
// the files are actually still being Shared because the attempt to unshare
// failed.
LOG("Attempting to disable UMS. Deferring until USB cable is unplugged.");
aMode = AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED;
}
if (aMode != mMode) {
LOG("Changing mode from '%s' to '%s'", ModeStr(mMode), ModeStr(aMode));
mMode = aMode;
DBG("Calling UpdateState due to mode set to %d", mMode);
UpdateState();
}
}
void SetSharingMode(const nsACString& aVolumeName, bool aAllowSharing)
{
RefPtr<Volume> vol = VolumeManager::FindVolumeByName(aVolumeName);
if (!vol) {
return;
}
if (vol->IsSharingEnabled() == aAllowSharing) {
return;
}
vol->SetUnmountRequested(false);
vol->SetMountRequested(false);
vol->SetSharingEnabled(aAllowSharing);
DBG("Calling UpdateState due to volume %s sharing set to %d",
vol->NameStr(), (int)aAllowSharing);
UpdateState();
}
void FormatVolume(const nsACString& aVolumeName)
{
RefPtr<Volume> vol = VolumeManager::FindVolumeByName(aVolumeName);
if (!vol) {
return;
}
if (vol->IsFormatRequested()) {
return;
}
vol->SetUnmountRequested(false);
vol->SetMountRequested(false);
vol->SetFormatRequested(true);
DBG("Calling UpdateState due to volume %s formatting set to %d",
vol->NameStr(), (int)vol->IsFormatRequested());
UpdateState();
}
void MountVolume(const nsACString& aVolumeName)
{
RefPtr<Volume> vol = VolumeManager::FindVolumeByName(aVolumeName);
if (!vol) {
return;
}
vol->SetUnmountRequested(false);
if (vol->IsMountRequested() || vol->mState == nsIVolume::STATE_MOUNTED) {
return;
}
vol->SetMountRequested(true);
DBG("Calling UpdateState due to volume %s mounting set to %d",
vol->NameStr(), (int)vol->IsMountRequested());
UpdateState();
}
void UnmountVolume(const nsACString& aVolumeName)
{
RefPtr<Volume> vol = VolumeManager::FindVolumeByName(aVolumeName);
if (!vol) {
return;
}
if (vol->IsUnmountRequested()) {
return;
}
vol->SetMountRequested(false);
vol->SetUnmountRequested(true);
DBG("Calling UpdateState due to volume %s unmounting set to %d",
vol->NameStr(), (int)vol->IsUnmountRequested());
UpdateState();
}
protected:
~AutoMounter()
{
Volume::UnregisterVolumeObserver(&mVolumeEventObserver, "AutoMounter");
VolumeManager::UnregisterStateObserver(&mVolumeManagerStateObserver);
}
private:
enum STATE
{
// IDLE - Nothing is being shared
STATE_IDLE,
// We've detected that conditions are right to enable mtp. So we've
// set sys.usb.config to include mtp, and we're waiting for the USB
// subsystem to be "configured". Once mtp shows up in
// then we know
// that its been configured and we can open /dev/mtp_usb
STATE_MTP_CONFIGURING,
// mtp has been configured (i.e. mtp now shows up in
// /sys/devices/virtual/android_usb/android0/functions so we can start
// the mtp server.
STATE_MTP_STARTED,
// The mtp server has reported sessionStarted. We'll leave this state
// when we receive sessionEnded.
STATE_MTP_CONNECTED,
// We've added mass_storage (aka UMS) to sys.usb.config and we're waiting for
// mass_storage to appear in /sys/devices/virtual/android_usb/android0/functions
STATE_UMS_CONFIGURING,
// mass_storage has been configured and we can start sharing once the user
// enables it.
STATE_UMS_CONFIGURED,
// USB Tethering is enabled
STATE_RNDIS_CONFIGURED,
};
const char *StateStr(STATE aState)
{
switch (aState) {
case STATE_IDLE: return "IDLE";
case STATE_MTP_CONFIGURING: return "MTP_CONFIGURING";
case STATE_MTP_CONNECTED: return "MTP_CONNECTED";
case STATE_MTP_STARTED: return "MTP_STARTED";
case STATE_UMS_CONFIGURING: return "UMS_CONFIGURING";
case STATE_UMS_CONFIGURED: return "UMS_CONFIGURED";
case STATE_RNDIS_CONFIGURED: return "RNDIS_CONFIGURED";
}
return "STATE_???";
}
void SetState(STATE aState)
{
const char *oldStateStr = StateStr(mState);
mState = aState;
const char *newStateStr = StateStr(mState);
LOG("AutoMounter state changed from %s to %s", oldStateStr, newStateStr);
}
STATE mState;
AutoVolumeEventObserver mVolumeEventObserver;
AutoVolumeManagerStateObserver mVolumeManagerStateObserver;
RefPtr<VolumeResponseCallback> mResponseCallback;
int32_t mMode;
MozMtpStorage::Array mMozMtpStorage;
};
static StaticRefPtr<AutoMounter> sAutoMounter;
static StaticRefPtr<MozMtpServer> sMozMtpServer;
// The following is for status reporter
enum STATE_REPORTER_STATE
{
REPORTER_UNREGISTERED,
REPORTER_REGISTERED
};
static int status_reporter_progress = REPORTER_UNREGISTERED;
nsresult getState(nsACString &desc)
{
sAutoMounter->Dump(desc);
return NS_OK;
}
NS_STATUS_REPORTER_IMPLEMENT(AutoMounter, "AutoMounter", getState);
/***************************************************************************/
void
AutoVolumeManagerStateObserver::Notify(const VolumeManager::StateChangedEvent &)
{
LOG("VolumeManager state changed event: %s", VolumeManager::StateStr());
if (!sAutoMounter) {
return;
}
// In the event that the VolumeManager just entered the VOLUMES_READY state,
// we call CheckVolumeSettings here (it's possible that this method never
// gets called if the VolumeManager was already in the VOLUMES_READY state
// by the time the AutoMounter was constructed).
sAutoMounter->CheckVolumeSettings();
DBG("Calling UpdateState due to VolumeManagerStateObserver");
sAutoMounter->UpdateState();
}
void
AutoVolumeEventObserver::Notify(Volume * const &)
{
if (!sAutoMounter) {
return;
}
DBG("Calling UpdateState due to VolumeEventStateObserver");
sAutoMounter->UpdateState();
}
void
AutoMounterResponseCallback::ResponseReceived(const VolumeCommand* aCommand)
{
if (WasSuccessful()) {
DBG("Calling UpdateState due to Volume::OnSuccess");
mErrorCount = 0;
sAutoMounter->UpdateState();
return;
}
ERR("Command '%s' failed: %d '%s'",
aCommand->CmdStr(), ResponseCode(), ResponseStr().get());
if (++mErrorCount < kMaxErrorCount) {
DBG("Calling UpdateState due to VolumeResponseCallback::OnError");
sAutoMounter->UpdateState();
}
}
static bool
IsUsbFunctionEnabled(const char* aConfig, const char* aUsbFunc)
{
nsAutoCString config(aConfig);
nsCCharSeparatedTokenizer tokenizer(config, ',');
while (tokenizer.hasMoreTokens()) {
nsAutoCString token(tokenizer.nextToken());
if (token.Equals(aUsbFunc)) {
DBG("IsUsbFunctionEnabled('%s', '%s'): returning true", aConfig, aUsbFunc);
return true;
}
}
DBG("IsUsbFunctionEnabled('%s', '%s'): returning false", aConfig, aUsbFunc);
return false;
}
static void
SetUsbFunction(const char* aUsbFunc)
{
char oldSysUsbConfig[PROPERTY_VALUE_MAX];
property_get(SYS_USB_CONFIG, oldSysUsbConfig, "");
if (strcmp(oldSysUsbConfig, USB_FUNC_NONE) == 0) {
// It's quite possible that sys.usb.config may have the value "none". We
// convert that to an empty string here, and at the end we convert the
// empty string back to "none".
oldSysUsbConfig[0] = '\0';
}
if (IsUsbFunctionEnabled(oldSysUsbConfig, aUsbFunc)) {
// The function is already configured. Nothing else to do.
DBG("SetUsbFunction('%s') - already set - nothing to do", aUsbFunc);
return;
}
char newSysUsbConfig[PROPERTY_VALUE_MAX];
if (strcmp(aUsbFunc, USB_FUNC_MTP) == 0) {
// We're enabling MTP. For this we'll wind up using mtp, or mtp,adb
strlcpy(newSysUsbConfig, USB_FUNC_MTP, sizeof(newSysUsbConfig));
} else if (strcmp(aUsbFunc, USB_FUNC_UMS) == 0) {
// We're enabling UMS. For this we make the assumption that the persisted
// property has mass_storage enabled.
property_get(PERSIST_SYS_USB_CONFIG, newSysUsbConfig, "");
} else if (strcmp(aUsbFunc, USB_FUNC_DEFAULT) == 0) {
// Set the property as PERSIST_SYS_USB_CONFIG
property_get(PERSIST_SYS_USB_CONFIG, newSysUsbConfig, "");
} else {
printf_stderr("AutoMounter::SetUsbFunction Unrecognized aUsbFunc '%s'\n", aUsbFunc);
MOZ_ASSERT(0);
return;
}
// Make sure the new value that we write into sys.usb.config keeps the adb
// (or non-adb) of the current string.
if (IsUsbFunctionEnabled(oldSysUsbConfig, USB_FUNC_ADB)) {
// ADB was turned on - keep it on.
if (!IsUsbFunctionEnabled(newSysUsbConfig, USB_FUNC_ADB)) {
// Add adb to the new string
strlcat(newSysUsbConfig, ",", sizeof(newSysUsbConfig));
strlcat(newSysUsbConfig, USB_FUNC_ADB, sizeof(newSysUsbConfig));
}
} else {
// ADB was turned off - keep it off
if (IsUsbFunctionEnabled(newSysUsbConfig, USB_FUNC_ADB)) {
// Remove ADB from the new string.
if (strcmp(newSysUsbConfig, USB_FUNC_ADB) == 0) {
newSysUsbConfig[0] = '\0';
} else {
nsAutoCString withoutAdb(newSysUsbConfig);
withoutAdb.ReplaceSubstring( "," USB_FUNC_ADB, "");
strlcpy(newSysUsbConfig, withoutAdb.get(), sizeof(newSysUsbConfig));
}
}
}
// If the persisted function didn't have mass_storage (this happens on
// the nexus 4/5, then we can get to here and have oldSysUsbConfig equal
// to newSysUsbConfig. So we need to check for that.
if (strcmp(oldSysUsbConfig, newSysUsbConfig) == 0) {
DBG("SetUsbFunction('%s') %s is already set to '%s' - nothing to do",
aUsbFunc, SYS_USB_CONFIG, newSysUsbConfig);
return;
}
if (newSysUsbConfig[0] == '\0') {
// Convert the empty string back to the string "none"
strlcpy(newSysUsbConfig, USB_FUNC_NONE, sizeof(newSysUsbConfig));
}
LOG("SetUsbFunction(%s) %s from '%s' to '%s'", aUsbFunc, SYS_USB_CONFIG,
oldSysUsbConfig, newSysUsbConfig);
property_set(SYS_USB_CONFIG, newSysUsbConfig);
}
bool
AutoMounter::StartMtpServer()
{
if (sMozMtpServer) {
// Mtp Server is already running - nothing to do
return true;
}
LOG("Starting MtpServer");
// For debugging, Change the #if 0 to #if 1, and then attach gdb during
// the 5 second interval below. Otherwise, configuring MTP will cause adb
// (and thus gdb) to get bounced.
#if 0
LOG("Sleeping");
PRTime now = PR_Now();
PRTime stopTime = now + 5000000;
while (PR_Now() < stopTime) {
LOG("Sleeping...");
sleep(1);
}
LOG("Sleep done");
#endif
sMozMtpServer = new MozMtpServer();
if (!sMozMtpServer->Init()) {
sMozMtpServer = nullptr;
return false;
}
VolumeArray::index_type volIndex;
VolumeArray::size_type numVolumes = VolumeManager::NumVolumes();
for (volIndex = 0; volIndex < numVolumes; volIndex++) {
RefPtr<Volume> vol = VolumeManager::GetVolume(volIndex);
RefPtr<MozMtpStorage> storage = new MozMtpStorage(vol, sMozMtpServer);
mMozMtpStorage.AppendElement(storage);
}
sMozMtpServer->Run();
return true;
}
void
AutoMounter::StopMtpServer()
{
LOG("Stopping MtpServer");
mMozMtpStorage.Clear();
sMozMtpServer = nullptr;
}
/***************************************************************************/
void
AutoMounter::UpdateState()
{
static bool inUpdateState = false;
if (inUpdateState) {
// When UpdateState calls SetISharing, this causes a volume state
// change to occur, which would normally cause UpdateState to be called
// again. We want the volume state change to go out (so that device
// storage will see the change in sharing state), but since we're
// already in UpdateState we just want to prevent recursion from screwing
// things up.
return;
}
AutoRestore<bool> inUpdateStateDetector(inUpdateState);
inUpdateState = true;
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
// If the following preconditions are met:
// - UMS is available (i.e. compiled into the kernel)
// - UMS is enabled
// - AutoMounter is enabled
// - USB cable is plugged in
// then we will try to unmount and share
// otherwise we will try to unshare and mount.
if (VolumeManager::State() != VolumeManager::VOLUMES_READY) {
// The volume manager isn't in a ready state, so there
// isn't anything else that we can do.
LOG("UpdateState: VolumeManager not ready yet");
return;
}
if (mResponseCallback->IsPending()) {
// We only deal with one outstanding volume command at a time,
// so we need to wait for it to finish.
return;
}
// Calling setprop sys.usb.config mtp,adb (or adding mass_storage) will
// cause /sys/devices/virtual/android_usb/android0/state to go:
// CONFIGURED -> DISCONNECTED -> CONNECTED -> CONFIGURED
//
// Since IsUsbCablePluggedIn returns state == CONFIGURED, it will look
// like a cable pull and replugin.
bool umsAvail, umsConfigured, umsEnabled;
bool mtpAvail, mtpConfigured, mtpEnabled;
bool rndisConfigured;
bool usbCablePluggedIn = IsUsbCablePluggedIn();
GetStatus(umsAvail, umsConfigured, umsEnabled, mtpAvail,
mtpConfigured, mtpEnabled, rndisConfigured);
bool enabled = mtpEnabled || umsEnabled;
if (mMode == AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED) {
// DISABLE_WHEN_UNPLUGGED implies already enabled.
enabled = usbCablePluggedIn;
if (!usbCablePluggedIn) {
mMode = AUTOMOUNTER_DISABLE;
mtpEnabled = false;
umsEnabled = false;
}
}
DBG("UpdateState: ums:A%dC%dE%d mtp:A%dC%dE%d rndis:%d mode:%d usb:%d mState:%s",
umsAvail, umsConfigured, umsEnabled,
mtpAvail, mtpConfigured, mtpEnabled, rndisConfigured,
mMode, usbCablePluggedIn, StateStr(mState));
switch (mState) {
case STATE_IDLE:
if (!usbCablePluggedIn) {
// Stay in the IDLE state. We'll get a CONNECTED or CONFIGURED
// UEvent when the usb cable is plugged in.
break;
}
if (rndisConfigured) {
// USB Tethering uses RNDIS. We'll just wait until its turned off.
SetState(STATE_RNDIS_CONFIGURED);
break;
}
if (mtpEnabled) {
if (mtpConfigured) {
// The USB layer has already been configured. Now we can go ahead
// and start the MTP server. This particular codepath will not
// normally be taken, but it could happen if you stop and restart
// b2g while sys.usb.config is set to enable mtp.
if (StartMtpServer()) {
SetState(STATE_MTP_STARTED);
} else {
if (umsAvail) {
// Unable to start MTP. Go back to UMS.
LOG("UpdateState: StartMtpServer failed, switch to UMS");
SetUsbFunction(USB_FUNC_UMS);
SetState(STATE_UMS_CONFIGURING);
} else {
LOG("UpdateState: StartMtpServer failed, keep idle state");
SetUsbFunction(USB_FUNC_DEFAULT);
}
}
} else {
// We need to configure USB to use mtp. Wait for it to be configured
// before we start the MTP server.
SetUsbFunction(USB_FUNC_MTP);
SetState(STATE_MTP_CONFIGURING);
}
} else if (umsConfigured) {
// UMS is already configured.
SetState(STATE_UMS_CONFIGURED);
} else if (umsAvail) {
// We do this whether or not UMS is enabled. With UMS, it's the
// sharing of the volume which is significant. What is important
// is that we don't leave it in MTP mode when MTP isn't enabled.
SetUsbFunction(USB_FUNC_UMS);
SetState(STATE_UMS_CONFIGURING);
}
break;
case STATE_MTP_CONFIGURING:
// While configuring, the USB configuration state will change from
// CONFIGURED -> CONNECTED -> DISCONNECTED -> CONNECTED -> CONFIGURED
// so we don't check for cable unplugged here.
if (mtpEnabled && mtpConfigured) {
// The USB layer has been configured. Now we can go ahead and start
// the MTP server.
if (StartMtpServer()) {
SetState(STATE_MTP_STARTED);
} else {
// Unable to start MTP. Go back to UMS.
SetUsbFunction(USB_FUNC_UMS);
SetState(STATE_UMS_CONFIGURING);
}
break;
}
if (rndisConfigured) {
SetState(STATE_RNDIS_CONFIGURED);
break;
}
break;
case STATE_MTP_STARTED:
if (usbCablePluggedIn && mtpConfigured && mtpEnabled) {
// Everything is still good. Leave the MTP server running
break;
}
DBG("STATE_MTP_STARTED: About to StopMtpServer "
"mtpConfigured = %d mtpEnabled = %d usbCablePluggedIn: %d",
mtpConfigured, mtpEnabled, usbCablePluggedIn);
StopMtpServer();
if (rndisConfigured) {
SetState(STATE_RNDIS_CONFIGURED);
break;
}
if (umsAvail) {
// Switch back to UMS
SetUsbFunction(USB_FUNC_UMS);
SetState(STATE_UMS_CONFIGURING);
break;
}
// if ums/rndis is not available and mtp is disable,
// restore the usb function as PERSIST_SYS_USB_CONFIG.
SetUsbFunction(USB_FUNC_DEFAULT);
SetState(STATE_IDLE);
break;
case STATE_UMS_CONFIGURING:
if (mtpEnabled) {
// MTP was enabled. Start reconfiguring.
SetState(STATE_MTP_CONFIGURING);
SetUsbFunction(USB_FUNC_MTP);
break;
}
if (rndisConfigured) {
SetState(STATE_RNDIS_CONFIGURED);
break;
}
// While configuring, the USB configuration state will change from
// CONFIGURED -> CONNECTED -> DISCONNECTED -> CONNECTED -> CONFIGURED
// so we don't check for cable unplugged here. However, having said
// that, we'll often sit in this state while the cable is unplugged,
// since we might not get any events until the cable gets plugged back
// in. This is why we need to check for mtpEnabled once we get the
// configured event.
if (umsConfigured) {
SetState(STATE_UMS_CONFIGURED);
}
break;
case STATE_UMS_CONFIGURED:
if (usbCablePluggedIn) {
if (mtpEnabled) {
// MTP was enabled. Start reconfiguring.
SetState(STATE_MTP_CONFIGURING);
SetUsbFunction(USB_FUNC_MTP);
break;
}
if (umsConfigured && umsEnabled) {
// This is the normal state when UMS is enabled.
break;
}
}
if (rndisConfigured) {
SetState(STATE_RNDIS_CONFIGURED);
break;
}
SetState(STATE_IDLE);
break;
case STATE_RNDIS_CONFIGURED:
if (usbCablePluggedIn && rndisConfigured) {
// Normal state when RNDIS is enabled.
break;
}
SetState(STATE_IDLE);
break;
default:
SetState(STATE_IDLE);
break;
}
bool tryToShare = umsEnabled && usbCablePluggedIn;
LOG("UpdateState: ums:A%dC%dE%d mtp:A%dC%dE%d mode:%d usb:%d tryToShare:%d state:%s",
umsAvail, umsConfigured, umsEnabled,
mtpAvail, mtpConfigured, mtpEnabled,
mMode, usbCablePluggedIn, tryToShare, StateStr(mState));
bool filesOpen = false;
static unsigned filesOpenDelayCount = 0;
VolumeArray::index_type volIndex;
VolumeArray::size_type numVolumes = VolumeManager::NumVolumes();
for (volIndex = 0; volIndex < numVolumes; volIndex++) {
RefPtr<Volume> vol = VolumeManager::GetVolume(volIndex);
Volume::STATE volState = vol->State();
if (vol->State() == nsIVolume::STATE_MOUNTED) {
LOG("UpdateState: Volume %s is %s and %s @ %s gen %d locked %d sharing %s",
vol->NameStr(), vol->StateStr(),
vol->MediaPresent() ? "inserted" : "missing",
vol->MountPoint().get(), vol->MountGeneration(),
(int)vol->IsMountLocked(),
vol->CanBeShared() ? (vol->IsSharingEnabled() ?
(vol->IsSharing() ? "en-y" : "en-n") : "dis") : "x");
if (vol->IsSharing() && !usbCablePluggedIn) {
// We call SetIsSharing(true) below to indicate intent to share. This
// causes a state change which notifys apps, and they'll close any
// open files, which will initiate the change away from the mounted
// state and into the sharing state. Normally, when the volume
// transitions back to the mounted state, then vol->mIsSharing gets set
// to false. However, if the user pulls the USB cable before we
// actually start sharing, then the volume never actually leaves
// the mounted state (and hence never transitions from
// sharing -> mounted), and mIsSharing never gets set back to false.
// So we clear mIsSharing here.
vol->SetIsSharing(false);
}
} else {
LOG("UpdateState: Volume %s is %s and %s", vol->NameStr(), vol->StateStr(),
vol->MediaPresent() ? "inserted" : "missing");
}
if (!vol->MediaPresent()) {
// No media - nothing we can do
continue;
}
if (vol->State() == nsIVolume::STATE_CHECKMNT) {
// vold reports the volume is "Mounted". Need to check if the volume is
// accessible by statfs(). Once it can be accessed, set the volume as
// STATE_MOUNTED, otherwise, post a delay task of UpdateState to check it
// again.
struct statfs fsbuf;
int rc = MOZ_TEMP_FAILURE_RETRY(statfs(vol->MountPoint().get(), &fsbuf));
if (rc == -1) {
// statfs() failed. Stay in STATE_CHECKMNT. Any failures here
// are probably non-recoverable, so we need to wait until
// something else changes the state back to IDLE/UNMOUNTED, etc.
ERR("statfs failed for '%s': errno = %d (%s)", vol->NameStr(), errno, strerror(errno));
continue;
}
static int delay = 250;
if (fsbuf.f_blocks == 0) {
if (delay <= 4000) {
LOG("UpdateState: Volume '%s' is inaccessible, checking again in %d msec", vol->NameStr(), delay);
MessageLoopForIO::current()->
PostDelayedTask(FROM_HERE,
NewRunnableMethod(this, &AutoMounter::UpdateState),
delay);
delay *= 2;
} else {
LOG("UpdateState: Volume '%s' is inaccessible, giving up", vol->NameStr());
}
continue;
} else {
delay = 250;
vol->SetState(nsIVolume::STATE_MOUNTED);
}
}
if ((tryToShare && vol->IsSharingEnabled()) ||
vol->IsFormatRequested() ||
vol->IsUnmountRequested()) {
switch (volState) {
// We're going to try to unmount the volume
case nsIVolume::STATE_MOUNTED: {
if (vol->IsMountLocked()) {
// The volume is currently locked, so leave it in the mounted
// state.
LOGW("UpdateState: Mounted volume %s is locked, not sharing or formatting",
vol->NameStr());
break;
}
// Mark the volume as if we've started sharing/formatting/unmmounting.
// This will cause apps which watch device storage notifications to see
// the volume go into the different state, and prompt them to close any
// open files that they might have.
if (tryToShare && vol->IsSharingEnabled()) {
vol->SetIsSharing(true);
} else if (vol->IsFormatRequested()){
vol->SetIsFormatting(true);
} else if (vol->IsUnmountRequested()){
vol->SetIsUnmounting(true);
}
// Check to see if there are any open files on the volume and
// don't initiate the unmount while there are open files.
OpenFileFinder::Info fileInfo;
OpenFileFinder fileFinder(vol->MountPoint());
if (fileFinder.First(&fileInfo)) {
LOGW("The following files are open under '%s'",
vol->MountPoint().get());
do {
LOGW(" PID: %d file: '%s' app: '%s' comm: '%s' exe: '%s'\n",
fileInfo.mPid,
fileInfo.mFileName.get(),
fileInfo.mAppName.get(),
fileInfo.mComm.get(),
fileInfo.mExe.get());
} while (fileFinder.Next(&fileInfo));
LOGW("UpdateState: Mounted volume %s has open files, not sharing or formatting",
vol->NameStr());
// Check again in a few seconds to see if the files are closed.
// Since we're trying to share the volume, this implies that we're
// plugged into the PC via USB and this in turn implies that the
// battery is charging, so we don't need to be too concerned about
// wasting battery here.
//
// If we just detected that there were files open, then we use
// a short timer. We will have told the apps that we're trying
// trying to share, and they'll be closing their files. This makes
// the sharing more responsive. If after a few seconds, the apps
// haven't closed their files, then we back off.
int delay = 1000;
if (filesOpenDelayCount > 10) {
delay = 5000;
}
MessageLoopForIO::current()->
PostDelayedTask(FROM_HERE,
NewRunnableMethod(this, &AutoMounter::UpdateState),
delay);
filesOpen = true;
break;
}
// Volume is mounted, we need to unmount before
// we can share.
LOG("UpdateState: Unmounting %s", vol->NameStr());
vol->StartUnmount(mResponseCallback);
return; // UpdateState will be called again when the Unmount command completes
}
case nsIVolume::STATE_IDLE:
case nsIVolume::STATE_MOUNT_FAIL: {
LOG("UpdateState: Volume %s is %s", vol->NameStr(), vol->StateStr());
if (vol->IsFormatting() && !vol->IsFormatRequested()) {
vol->SetFormatRequested(false);
if (!(tryToShare && vol->IsSharingEnabled()) && volState == nsIVolume::STATE_IDLE) {
LOG("UpdateState: Mounting %s", vol->NameStr());
vol->StartMount(mResponseCallback);
break;
}
}
// If there are format and share requests in the same time,
// we should do format first then share.
if (vol->IsFormatRequested()) {
// Volume is unmounted. We can go ahead and format.
LOG("UpdateState: Formatting %s", vol->NameStr());
vol->StartFormat(mResponseCallback);
} else if (tryToShare && vol->IsSharingEnabled() && volState == nsIVolume::STATE_IDLE) {
// Volume is unmounted. We can go ahead and share.
LOG("UpdateState: Sharing %s", vol->NameStr());
vol->StartShare(mResponseCallback);
}
return; // UpdateState will be called again when the Share/Format command completes
}
default: {
// Not in a state that we can do anything about.
break;
}
}
} else {
// We're going to try and unshare and remount the volumes
switch (volState) {
case nsIVolume::STATE_SHARED: {
// Volume is shared. We can go ahead and unshare.
LOG("UpdateState: Unsharing %s", vol->NameStr());
vol->StartUnshare(mResponseCallback);
return; // UpdateState will be called again when the Unshare command completes
}
case nsIVolume::STATE_IDLE: {
if (!vol->IsUnmountRequested()) {
// Volume is unmounted and mount-requested, try to mount.
LOG("UpdateState: Mounting %s", vol->NameStr());
vol->StartMount(mResponseCallback);
}
return; // UpdateState will be called again when Mount command completes
}
default: {
// Not in a state that we can do anything about.
break;
}
}
}
}
int32_t status = AUTOMOUNTER_STATUS_DISABLED;
if (filesOpen) {
filesOpenDelayCount++;
status = AUTOMOUNTER_STATUS_FILES_OPEN;
} else if (enabled) {
filesOpenDelayCount = 0;
status = AUTOMOUNTER_STATUS_ENABLED;
}
SetAutoMounterStatus(status);
}
/***************************************************************************/
void AutoMounter::GetStatus(bool& umsAvail, bool& umsConfigured, bool& umsEnabled,
bool& mtpAvail, bool& mtpConfigured, bool& mtpEnabled,
bool& rndisConfigured)
{
umsAvail = false;
umsConfigured = false;
umsEnabled = false;
mtpAvail = false;
mtpConfigured = false;
mtpEnabled = false;
rndisConfigured = false;
if (access(ICS_SYS_USB_FUNCTIONS, F_OK) != 0) {
return;
}
char functionsStr[60];
if (!ReadSysFile(ICS_SYS_USB_FUNCTIONS, functionsStr, sizeof(functionsStr))) {
ERR("Error reading file '%s': %s", ICS_SYS_USB_FUNCTIONS, strerror(errno));
functionsStr[0] = '\0';
}
DBG("GetStatus: USB functions: '%s'", functionsStr);
bool usbConfigured = IsUsbConfigured();
// On the Nexus 4/5, it advertises that the UMS usb function is available,
// but we have a further requirement that mass_storage be in the
// persist.sys.usb.config property.
char persistSysUsbConfig[PROPERTY_VALUE_MAX];
property_get(PERSIST_SYS_USB_CONFIG, persistSysUsbConfig, "");
if (IsUsbFunctionEnabled(persistSysUsbConfig, USB_FUNC_UMS)) {
umsAvail = (access(ICS_SYS_UMS_DIRECTORY, F_OK) == 0);
}
if (umsAvail) {
umsConfigured = usbConfigured && strstr(functionsStr, USB_FUNC_UMS) != nullptr;
umsEnabled = (mMode == AUTOMOUNTER_ENABLE_UMS) ||
((mMode == AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED) && umsConfigured);
} else {
umsConfigured = false;
umsEnabled = false;
}
mtpAvail = (access(ICS_SYS_MTP_DIRECTORY, F_OK) == 0);
if (mtpAvail) {
mtpConfigured = usbConfigured && strstr(functionsStr, USB_FUNC_MTP) != nullptr;
mtpEnabled = (mMode == AUTOMOUNTER_ENABLE_MTP) ||
((mMode == AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED) && mtpConfigured);
} else {
mtpConfigured = false;
mtpEnabled = false;
}
rndisConfigured = strstr(functionsStr, USB_FUNC_RNDIS) != nullptr;
}
nsresult AutoMounter::Dump(nsACString& desc)
{
DBG("GetState!");
bool umsAvail, umsConfigured, umsEnabled;
bool mtpAvail, mtpConfigured, mtpEnabled;
bool rndisConfigured;
GetStatus(umsAvail, umsConfigured, umsEnabled, mtpAvail,
mtpConfigured, mtpEnabled, rndisConfigured);
if (mMode == AUTOMOUNTER_DISABLE_WHEN_UNPLUGGED) {
// DISABLE_WHEN_UNPLUGGED implies already enabled.
if (!IsUsbCablePluggedIn()) {
mMode = AUTOMOUNTER_DISABLE;
mtpEnabled = false;
umsEnabled = false;
}
}
// Automounter information
desc += "Current Mode:";
desc += ModeStr(mMode);
desc += "|";
desc += "Current State:";
desc += StateStr(mState);
desc += "|";
desc += "UMS Status:";
if (umsAvail) {
desc += "Available";
} else {
desc += "UnAvailable";
}
desc += ",";
if (umsConfigured) {
desc += "Configured";
} else {
desc += "Un-Configured";
}
desc += ",";
if (umsEnabled) {
desc += "Enabled";
} else {
desc += "Disabled";
}
desc += "|";
desc += "MTP Status:";
if (mtpAvail) {
desc += "Available";
} else {
desc += "UnAvailable";
}
desc += ",";
if (mtpConfigured) {
desc += "Configured";
} else {
desc += "Un-Configured";
}
desc += ",";
if (mtpEnabled) {
desc += "Enabled";
} else {
desc += "Disabled";
}
// Volume information
VolumeArray::index_type volIndex;
VolumeArray::size_type numVolumes = VolumeManager::NumVolumes();
for (volIndex = 0; volIndex < numVolumes; volIndex++) {
RefPtr<Volume> vol = VolumeManager::GetVolume(volIndex);
desc += "|";
desc += vol->NameStr();
desc += ":";
desc += vol->StateStr();
desc += "@";
desc += vol->MountPoint().get();
if (!vol->MediaPresent()) {
continue;
}
if (vol->CanBeShared()) {
desc += ",CanBeShared";
}
if (vol->CanBeFormatted()) {
desc += ",CanBeFormatted";
}
if (vol->CanBeMounted()) {
desc += ",CanBeMounted";
}
if (vol->IsRemovable()) {
desc += ",Removable";
}
if (vol->IsHotSwappable()) {
desc += ",HotSwappable";
}
}
return NS_OK;
}
static void
InitAutoMounterIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(!sAutoMounter);
sAutoMounter = new AutoMounter();
}
static void
ShutdownAutoMounterIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
sAutoMounter = nullptr;
ShutdownVolumeManager();
}
static void
SetAutoMounterModeIOThread(const int32_t& aMode)
{
MOZ_ASSERT(XRE_IsParentProcess());
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sAutoMounter);
sAutoMounter->SetMode(aMode);
}
static void
SetAutoMounterSharingModeIOThread(const nsCString& aVolumeName, const bool& aAllowSharing)
{
MOZ_ASSERT(XRE_IsParentProcess());
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sAutoMounter);
sAutoMounter->SetSharingMode(aVolumeName, aAllowSharing);
}
static void
AutoMounterFormatVolumeIOThread(const nsCString& aVolumeName)
{
MOZ_ASSERT(XRE_IsParentProcess());
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sAutoMounter);
sAutoMounter->FormatVolume(aVolumeName);
}
static void
AutoMounterMountVolumeIOThread(const nsCString& aVolumeName)
{
MOZ_ASSERT(XRE_IsParentProcess());
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sAutoMounter);
sAutoMounter->MountVolume(aVolumeName);
}
static void
AutoMounterUnmountVolumeIOThread(const nsCString& aVolumeName)
{
MOZ_ASSERT(XRE_IsParentProcess());
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sAutoMounter);
sAutoMounter->UnmountVolume(aVolumeName);
}
static void
UsbCableEventIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
if (!sAutoMounter) {
return;
}
DBG("Calling UpdateState due to USBCableEvent");
sAutoMounter->UpdateState();
}
/**************************************************************************
*
* Public API
*
* Since the AutoMounter runs in IO Thread context, we need to switch
* to IOThread context before we can do anything.
*
**************************************************************************/
class UsbCableObserver final : public hal::SwitchObserver
{
~UsbCableObserver()
{
hal::UnregisterSwitchObserver(hal::SWITCH_USB, this);
}
public:
NS_INLINE_DECL_REFCOUNTING(UsbCableObserver)
UsbCableObserver()
{
hal::RegisterSwitchObserver(hal::SWITCH_USB, this);
}
virtual void Notify(const hal::SwitchEvent& aEvent)
{
DBG("UsbCable switch device: %d state: %s\n",
aEvent.device(), SwitchStateStr(aEvent));
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(UsbCableEventIOThread));
}
};
static StaticRefPtr<UsbCableObserver> sUsbCableObserver;
static StaticRefPtr<AutoMounterSetting> sAutoMounterSetting;
void
InitAutoMounter()
{
InitVolumeManager();
sAutoMounterSetting = new AutoMounterSetting();
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(InitAutoMounterIOThread));
// Switch Observers need to run on the main thread, so we need to
// start it here and have it send events to the AutoMounter running
// on the IO Thread.
sUsbCableObserver = new UsbCableObserver();
// Register status reporter into reporter manager
if(status_reporter_progress == REPORTER_UNREGISTERED) {
NS_RegisterStatusReporter(new NS_STATUS_REPORTER_NAME(AutoMounter));
}
status_reporter_progress = REPORTER_REGISTERED;
}
int32_t
GetAutoMounterStatus()
{
if (sAutoMounterSetting) {
return sAutoMounterSetting->GetStatus();
}
return AUTOMOUNTER_STATUS_DISABLED;
}
//static
void
SetAutoMounterStatus(int32_t aStatus)
{
if (sAutoMounterSetting) {
sAutoMounterSetting->SetStatus(aStatus);
}
}
void
SetAutoMounterMode(int32_t aMode)
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(SetAutoMounterModeIOThread, aMode));
}
void
SetAutoMounterSharingMode(const nsCString& aVolumeName, bool aAllowSharing)
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(SetAutoMounterSharingModeIOThread,
aVolumeName, aAllowSharing));
}
void
AutoMounterFormatVolume(const nsCString& aVolumeName)
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(AutoMounterFormatVolumeIOThread,
aVolumeName));
}
void
AutoMounterMountVolume(const nsCString& aVolumeName)
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(AutoMounterMountVolumeIOThread,
aVolumeName));
}
void
AutoMounterUnmountVolume(const nsCString& aVolumeName)
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(AutoMounterUnmountVolumeIOThread,
aVolumeName));
}
void
ShutdownAutoMounter()
{
if (sAutoMounter) {
DBG("ShutdownAutoMounter: About to StopMtpServer");
sAutoMounter->StopMtpServer();
// Unregister status reporter into reporter manager
if(status_reporter_progress == REPORTER_REGISTERED) {
NS_UnregisterStatusReporter(new NS_STATUS_REPORTER_NAME(AutoMounter));
}
status_reporter_progress = REPORTER_UNREGISTERED;
}
sAutoMounterSetting = nullptr;
sUsbCableObserver = nullptr;
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(ShutdownAutoMounterIOThread));
}
} // system
} // mozilla
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку