зеркало из https://github.com/mozilla/gecko-dev.git
4757 строки
179 KiB
Python
Executable File
4757 строки
179 KiB
Python
Executable File
#!/usr/bin/python
|
|
#
|
|
# Copyright (c) 2009 Google Inc. All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are
|
|
# met:
|
|
#
|
|
# * Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# * Redistributions in binary form must reproduce the above
|
|
# copyright notice, this list of conditions and the following disclaimer
|
|
# in the documentation and/or other materials provided with the
|
|
# distribution.
|
|
# * Neither the name of Google Inc. nor the names of its
|
|
# contributors may be used to endorse or promote products derived from
|
|
# this software without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
"""Does google-lint on c++ files.
|
|
|
|
The goal of this script is to identify places in the code that *may*
|
|
be in non-compliance with google style. It does not attempt to fix
|
|
up these problems -- the point is to educate. It does also not
|
|
attempt to find all problems, or to ensure that everything it does
|
|
find is legitimately a problem.
|
|
|
|
In particular, we can get very confused by /* and // inside strings!
|
|
We do a small hack, which is to ignore //'s with "'s after them on the
|
|
same line, but it is far from perfect (in either direction).
|
|
"""
|
|
|
|
import codecs
|
|
import copy
|
|
import getopt
|
|
import math # for log
|
|
import os
|
|
import re
|
|
import sre_compile
|
|
import string
|
|
import sys
|
|
import unicodedata
|
|
|
|
|
|
_USAGE = """
|
|
Syntax: cpplint.py [--verbose=#] [--output=vs7] [--filter=-x,+y,...]
|
|
[--counting=total|toplevel|detailed] [--root=subdir]
|
|
[--linelength=digits]
|
|
<file> [file] ...
|
|
|
|
The style guidelines this tries to follow are those in
|
|
http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
|
|
|
|
Every problem is given a confidence score from 1-5, with 5 meaning we are
|
|
certain of the problem, and 1 meaning it could be a legitimate construct.
|
|
This will miss some errors, and is not a substitute for a code review.
|
|
|
|
To suppress false-positive errors of a certain category, add a
|
|
'NOLINT(category)' comment to the line. NOLINT or NOLINT(*)
|
|
suppresses errors of all categories on that line.
|
|
|
|
The files passed in will be linted; at least one file must be provided.
|
|
Default linted extensions are .cc, .cpp, .cu, .cuh and .h. Change the
|
|
extensions with the --extensions flag.
|
|
|
|
Flags:
|
|
|
|
output=vs7
|
|
By default, the output is formatted to ease emacs parsing. Visual Studio
|
|
compatible output (vs7) may also be used. Other formats are unsupported.
|
|
|
|
verbose=#
|
|
Specify a number 0-5 to restrict errors to certain verbosity levels.
|
|
|
|
filter=-x,+y,...
|
|
Specify a comma-separated list of category-filters to apply: only
|
|
error messages whose category names pass the filters will be printed.
|
|
(Category names are printed with the message and look like
|
|
"[whitespace/indent]".) Filters are evaluated left to right.
|
|
"-FOO" and "FOO" means "do not print categories that start with FOO".
|
|
"+FOO" means "do print categories that start with FOO".
|
|
|
|
Examples: --filter=-whitespace,+whitespace/braces
|
|
--filter=whitespace,runtime/printf,+runtime/printf_format
|
|
--filter=-,+build/include_what_you_use
|
|
|
|
To see a list of all the categories used in cpplint, pass no arg:
|
|
--filter=
|
|
|
|
counting=total|toplevel|detailed
|
|
The total number of errors found is always printed. If
|
|
'toplevel' is provided, then the count of errors in each of
|
|
the top-level categories like 'build' and 'whitespace' will
|
|
also be printed. If 'detailed' is provided, then a count
|
|
is provided for each category like 'build/class'.
|
|
|
|
root=subdir
|
|
The root directory used for deriving header guard CPP variable.
|
|
By default, the header guard CPP variable is calculated as the relative
|
|
path to the directory that contains .git, .hg, or .svn. When this flag
|
|
is specified, the relative path is calculated from the specified
|
|
directory. If the specified directory does not exist, this flag is
|
|
ignored.
|
|
|
|
Examples:
|
|
Assuing that src/.git exists, the header guard CPP variables for
|
|
src/chrome/browser/ui/browser.h are:
|
|
|
|
No flag => CHROME_BROWSER_UI_BROWSER_H_
|
|
--root=chrome => BROWSER_UI_BROWSER_H_
|
|
--root=chrome/browser => UI_BROWSER_H_
|
|
|
|
linelength=digits
|
|
This is the allowed line length for the project. The default value is
|
|
80 characters.
|
|
|
|
Examples:
|
|
--linelength=120
|
|
|
|
extensions=extension,extension,...
|
|
The allowed file extensions that cpplint will check
|
|
|
|
Examples:
|
|
--extensions=hpp,cpp
|
|
"""
|
|
|
|
# We categorize each error message we print. Here are the categories.
|
|
# We want an explicit list so we can list them all in cpplint --filter=.
|
|
# If you add a new error message with a new category, add it to the list
|
|
# here! cpplint_unittest.py should tell you if you forget to do this.
|
|
_ERROR_CATEGORIES = [
|
|
'build/class',
|
|
'build/deprecated',
|
|
'build/endif_comment',
|
|
'build/explicit_make_pair',
|
|
'build/forward_decl',
|
|
'build/header_guard',
|
|
'build/include',
|
|
'build/include_alpha',
|
|
'build/include_order',
|
|
'build/include_what_you_use',
|
|
'build/namespaces',
|
|
'build/printf_format',
|
|
'build/storage_class',
|
|
'legal/copyright',
|
|
'readability/alt_tokens',
|
|
'readability/braces',
|
|
'readability/casting',
|
|
'readability/check',
|
|
'readability/constructors',
|
|
'readability/fn_size',
|
|
'readability/function',
|
|
'readability/multiline_comment',
|
|
'readability/multiline_string',
|
|
'readability/namespace',
|
|
'readability/nolint',
|
|
'readability/nul',
|
|
'readability/streams',
|
|
'readability/todo',
|
|
'readability/utf8',
|
|
'runtime/arrays',
|
|
'runtime/casting',
|
|
'runtime/explicit',
|
|
'runtime/int',
|
|
'runtime/init',
|
|
'runtime/invalid_increment',
|
|
'runtime/member_string_references',
|
|
'runtime/memset',
|
|
'runtime/operator',
|
|
'runtime/printf',
|
|
'runtime/printf_format',
|
|
'runtime/references',
|
|
'runtime/sizeof',
|
|
'runtime/string',
|
|
'runtime/threadsafe_fn',
|
|
'runtime/vlog',
|
|
'whitespace/blank_line',
|
|
'whitespace/braces',
|
|
'whitespace/comma',
|
|
'whitespace/comments',
|
|
'whitespace/empty_conditional_body',
|
|
'whitespace/empty_loop_body',
|
|
'whitespace/end_of_line',
|
|
'whitespace/ending_newline',
|
|
'whitespace/forcolon',
|
|
'whitespace/indent',
|
|
'whitespace/line_length',
|
|
'whitespace/newline',
|
|
'whitespace/operators',
|
|
'whitespace/parens',
|
|
'whitespace/semicolon',
|
|
'whitespace/tab',
|
|
'whitespace/todo'
|
|
]
|
|
|
|
# The default state of the category filter. This is overrided by the --filter=
|
|
# flag. By default all errors are on, so only add here categories that should be
|
|
# off by default (i.e., categories that must be enabled by the --filter= flags).
|
|
# All entries here should start with a '-' or '+', as in the --filter= flag.
|
|
_DEFAULT_FILTERS = ['-build/include_alpha']
|
|
|
|
# We used to check for high-bit characters, but after much discussion we
|
|
# decided those were OK, as long as they were in UTF-8 and didn't represent
|
|
# hard-coded international strings, which belong in a separate i18n file.
|
|
|
|
|
|
# C++ headers
|
|
_CPP_HEADERS = frozenset([
|
|
# Legacy
|
|
'algobase.h',
|
|
'algo.h',
|
|
'alloc.h',
|
|
'builtinbuf.h',
|
|
'bvector.h',
|
|
'complex.h',
|
|
'defalloc.h',
|
|
'deque.h',
|
|
'editbuf.h',
|
|
'fstream.h',
|
|
'function.h',
|
|
'hash_map',
|
|
'hash_map.h',
|
|
'hash_set',
|
|
'hash_set.h',
|
|
'hashtable.h',
|
|
'heap.h',
|
|
'indstream.h',
|
|
'iomanip.h',
|
|
'iostream.h',
|
|
'istream.h',
|
|
'iterator.h',
|
|
'list.h',
|
|
'map.h',
|
|
'multimap.h',
|
|
'multiset.h',
|
|
'ostream.h',
|
|
'pair.h',
|
|
'parsestream.h',
|
|
'pfstream.h',
|
|
'procbuf.h',
|
|
'pthread_alloc',
|
|
'pthread_alloc.h',
|
|
'rope',
|
|
'rope.h',
|
|
'ropeimpl.h',
|
|
'set.h',
|
|
'slist',
|
|
'slist.h',
|
|
'stack.h',
|
|
'stdiostream.h',
|
|
'stl_alloc.h',
|
|
'stl_relops.h',
|
|
'streambuf.h',
|
|
'stream.h',
|
|
'strfile.h',
|
|
'strstream.h',
|
|
'tempbuf.h',
|
|
'tree.h',
|
|
'type_traits.h',
|
|
'vector.h',
|
|
# 17.6.1.2 C++ library headers
|
|
'algorithm',
|
|
'array',
|
|
'atomic',
|
|
'bitset',
|
|
'chrono',
|
|
'codecvt',
|
|
'complex',
|
|
'condition_variable',
|
|
'deque',
|
|
'exception',
|
|
'forward_list',
|
|
'fstream',
|
|
'functional',
|
|
'future',
|
|
'initializer_list',
|
|
'iomanip',
|
|
'ios',
|
|
'iosfwd',
|
|
'iostream',
|
|
'istream',
|
|
'iterator',
|
|
'limits',
|
|
'list',
|
|
'locale',
|
|
'map',
|
|
'memory',
|
|
'mutex',
|
|
'new',
|
|
'numeric',
|
|
'ostream',
|
|
'queue',
|
|
'random',
|
|
'ratio',
|
|
'regex',
|
|
'set',
|
|
'sstream',
|
|
'stack',
|
|
'stdexcept',
|
|
'streambuf',
|
|
'string',
|
|
'strstream',
|
|
'system_error',
|
|
'thread',
|
|
'tuple',
|
|
'typeindex',
|
|
'typeinfo',
|
|
'type_traits',
|
|
'unordered_map',
|
|
'unordered_set',
|
|
'utility',
|
|
'valarray',
|
|
'vector',
|
|
# 17.6.1.2 C++ headers for C library facilities
|
|
'cassert',
|
|
'ccomplex',
|
|
'cctype',
|
|
'cerrno',
|
|
'cfenv',
|
|
'cfloat',
|
|
'cinttypes',
|
|
'ciso646',
|
|
'climits',
|
|
'clocale',
|
|
'cmath',
|
|
'csetjmp',
|
|
'csignal',
|
|
'cstdalign',
|
|
'cstdarg',
|
|
'cstdbool',
|
|
'cstddef',
|
|
'cstdint',
|
|
'cstdio',
|
|
'cstdlib',
|
|
'cstring',
|
|
'ctgmath',
|
|
'ctime',
|
|
'cuchar',
|
|
'cwchar',
|
|
'cwctype',
|
|
])
|
|
|
|
# Assertion macros. These are defined in base/logging.h and
|
|
# testing/base/gunit.h. Note that the _M versions need to come first
|
|
# for substring matching to work.
|
|
_CHECK_MACROS = [
|
|
'DCHECK', 'CHECK',
|
|
'EXPECT_TRUE_M', 'EXPECT_TRUE',
|
|
'ASSERT_TRUE_M', 'ASSERT_TRUE',
|
|
'EXPECT_FALSE_M', 'EXPECT_FALSE',
|
|
'ASSERT_FALSE_M', 'ASSERT_FALSE',
|
|
]
|
|
|
|
# Replacement macros for CHECK/DCHECK/EXPECT_TRUE/EXPECT_FALSE
|
|
_CHECK_REPLACEMENT = dict([(m, {}) for m in _CHECK_MACROS])
|
|
|
|
for op, replacement in [('==', 'EQ'), ('!=', 'NE'),
|
|
('>=', 'GE'), ('>', 'GT'),
|
|
('<=', 'LE'), ('<', 'LT')]:
|
|
_CHECK_REPLACEMENT['DCHECK'][op] = 'DCHECK_%s' % replacement
|
|
_CHECK_REPLACEMENT['CHECK'][op] = 'CHECK_%s' % replacement
|
|
_CHECK_REPLACEMENT['EXPECT_TRUE'][op] = 'EXPECT_%s' % replacement
|
|
_CHECK_REPLACEMENT['ASSERT_TRUE'][op] = 'ASSERT_%s' % replacement
|
|
_CHECK_REPLACEMENT['EXPECT_TRUE_M'][op] = 'EXPECT_%s_M' % replacement
|
|
_CHECK_REPLACEMENT['ASSERT_TRUE_M'][op] = 'ASSERT_%s_M' % replacement
|
|
|
|
for op, inv_replacement in [('==', 'NE'), ('!=', 'EQ'),
|
|
('>=', 'LT'), ('>', 'LE'),
|
|
('<=', 'GT'), ('<', 'GE')]:
|
|
_CHECK_REPLACEMENT['EXPECT_FALSE'][op] = 'EXPECT_%s' % inv_replacement
|
|
_CHECK_REPLACEMENT['ASSERT_FALSE'][op] = 'ASSERT_%s' % inv_replacement
|
|
_CHECK_REPLACEMENT['EXPECT_FALSE_M'][op] = 'EXPECT_%s_M' % inv_replacement
|
|
_CHECK_REPLACEMENT['ASSERT_FALSE_M'][op] = 'ASSERT_%s_M' % inv_replacement
|
|
|
|
# Alternative tokens and their replacements. For full list, see section 2.5
|
|
# Alternative tokens [lex.digraph] in the C++ standard.
|
|
#
|
|
# Digraphs (such as '%:') are not included here since it's a mess to
|
|
# match those on a word boundary.
|
|
_ALT_TOKEN_REPLACEMENT = {
|
|
'and': '&&',
|
|
'bitor': '|',
|
|
'or': '||',
|
|
'xor': '^',
|
|
'compl': '~',
|
|
'bitand': '&',
|
|
'and_eq': '&=',
|
|
'or_eq': '|=',
|
|
'xor_eq': '^=',
|
|
'not': '!',
|
|
'not_eq': '!='
|
|
}
|
|
|
|
# Compile regular expression that matches all the above keywords. The "[ =()]"
|
|
# bit is meant to avoid matching these keywords outside of boolean expressions.
|
|
#
|
|
# False positives include C-style multi-line comments and multi-line strings
|
|
# but those have always been troublesome for cpplint.
|
|
_ALT_TOKEN_REPLACEMENT_PATTERN = re.compile(
|
|
r'[ =()](' + ('|'.join(_ALT_TOKEN_REPLACEMENT.keys())) + r')(?=[ (]|$)')
|
|
|
|
|
|
# These constants define types of headers for use with
|
|
# _IncludeState.CheckNextIncludeOrder().
|
|
_C_SYS_HEADER = 1
|
|
_CPP_SYS_HEADER = 2
|
|
_LIKELY_MY_HEADER = 3
|
|
_POSSIBLE_MY_HEADER = 4
|
|
_OTHER_HEADER = 5
|
|
|
|
# These constants define the current inline assembly state
|
|
_NO_ASM = 0 # Outside of inline assembly block
|
|
_INSIDE_ASM = 1 # Inside inline assembly block
|
|
_END_ASM = 2 # Last line of inline assembly block
|
|
_BLOCK_ASM = 3 # The whole block is an inline assembly block
|
|
|
|
# Match start of assembly blocks
|
|
_MATCH_ASM = re.compile(r'^\s*(?:asm|_asm|__asm|__asm__)'
|
|
r'(?:\s+(volatile|__volatile__))?'
|
|
r'\s*[{(]')
|
|
|
|
|
|
_regexp_compile_cache = {}
|
|
|
|
# Finds occurrences of NOLINT or NOLINT(...).
|
|
_RE_SUPPRESSION = re.compile(r'\bNOLINT\b(\([^)]*\))?')
|
|
|
|
# {str, set(int)}: a map from error categories to sets of linenumbers
|
|
# on which those errors are expected and should be suppressed.
|
|
_error_suppressions = {}
|
|
|
|
# The root directory used for deriving header guard CPP variable.
|
|
# This is set by --root flag.
|
|
_root = None
|
|
|
|
# The allowed line length of files.
|
|
# This is set by --linelength flag.
|
|
_line_length = 80
|
|
|
|
# The allowed extensions for file names
|
|
# This is set by --extensions flag.
|
|
_valid_extensions = set(['cc', 'h', 'cpp', 'cu', 'cuh'])
|
|
|
|
def ParseNolintSuppressions(filename, raw_line, linenum, error):
|
|
"""Updates the global list of error-suppressions.
|
|
|
|
Parses any NOLINT comments on the current line, updating the global
|
|
error_suppressions store. Reports an error if the NOLINT comment
|
|
was malformed.
|
|
|
|
Args:
|
|
filename: str, the name of the input file.
|
|
raw_line: str, the line of input text, with comments.
|
|
linenum: int, the number of the current line.
|
|
error: function, an error handler.
|
|
"""
|
|
# FIXME(adonovan): "NOLINT(" is misparsed as NOLINT(*).
|
|
matched = _RE_SUPPRESSION.search(raw_line)
|
|
if matched:
|
|
category = matched.group(1)
|
|
if category in (None, '(*)'): # => "suppress all"
|
|
_error_suppressions.setdefault(None, set()).add(linenum)
|
|
else:
|
|
if category.startswith('(') and category.endswith(')'):
|
|
category = category[1:-1]
|
|
if category in _ERROR_CATEGORIES:
|
|
_error_suppressions.setdefault(category, set()).add(linenum)
|
|
else:
|
|
error(filename, linenum, 'readability/nolint', 5,
|
|
'Unknown NOLINT error category: %s' % category)
|
|
|
|
|
|
def ResetNolintSuppressions():
|
|
"Resets the set of NOLINT suppressions to empty."
|
|
_error_suppressions.clear()
|
|
|
|
|
|
def IsErrorSuppressedByNolint(category, linenum):
|
|
"""Returns true if the specified error category is suppressed on this line.
|
|
|
|
Consults the global error_suppressions map populated by
|
|
ParseNolintSuppressions/ResetNolintSuppressions.
|
|
|
|
Args:
|
|
category: str, the category of the error.
|
|
linenum: int, the current line number.
|
|
Returns:
|
|
bool, True iff the error should be suppressed due to a NOLINT comment.
|
|
"""
|
|
return (linenum in _error_suppressions.get(category, set()) or
|
|
linenum in _error_suppressions.get(None, set()))
|
|
|
|
def Match(pattern, s):
|
|
"""Matches the string with the pattern, caching the compiled regexp."""
|
|
# The regexp compilation caching is inlined in both Match and Search for
|
|
# performance reasons; factoring it out into a separate function turns out
|
|
# to be noticeably expensive.
|
|
if pattern not in _regexp_compile_cache:
|
|
_regexp_compile_cache[pattern] = sre_compile.compile(pattern)
|
|
return _regexp_compile_cache[pattern].match(s)
|
|
|
|
|
|
def ReplaceAll(pattern, rep, s):
|
|
"""Replaces instances of pattern in a string with a replacement.
|
|
|
|
The compiled regex is kept in a cache shared by Match and Search.
|
|
|
|
Args:
|
|
pattern: regex pattern
|
|
rep: replacement text
|
|
s: search string
|
|
|
|
Returns:
|
|
string with replacements made (or original string if no replacements)
|
|
"""
|
|
if pattern not in _regexp_compile_cache:
|
|
_regexp_compile_cache[pattern] = sre_compile.compile(pattern)
|
|
return _regexp_compile_cache[pattern].sub(rep, s)
|
|
|
|
|
|
def Search(pattern, s):
|
|
"""Searches the string for the pattern, caching the compiled regexp."""
|
|
if pattern not in _regexp_compile_cache:
|
|
_regexp_compile_cache[pattern] = sre_compile.compile(pattern)
|
|
return _regexp_compile_cache[pattern].search(s)
|
|
|
|
|
|
class _IncludeState(dict):
|
|
"""Tracks line numbers for includes, and the order in which includes appear.
|
|
|
|
As a dict, an _IncludeState object serves as a mapping between include
|
|
filename and line number on which that file was included.
|
|
|
|
Call CheckNextIncludeOrder() once for each header in the file, passing
|
|
in the type constants defined above. Calls in an illegal order will
|
|
raise an _IncludeError with an appropriate error message.
|
|
|
|
"""
|
|
# self._section will move monotonically through this set. If it ever
|
|
# needs to move backwards, CheckNextIncludeOrder will raise an error.
|
|
_INITIAL_SECTION = 0
|
|
_MY_H_SECTION = 1
|
|
_C_SECTION = 2
|
|
_CPP_SECTION = 3
|
|
_OTHER_H_SECTION = 4
|
|
|
|
_TYPE_NAMES = {
|
|
_C_SYS_HEADER: 'C system header',
|
|
_CPP_SYS_HEADER: 'C++ system header',
|
|
_LIKELY_MY_HEADER: 'header this file implements',
|
|
_POSSIBLE_MY_HEADER: 'header this file may implement',
|
|
_OTHER_HEADER: 'other header',
|
|
}
|
|
_SECTION_NAMES = {
|
|
_INITIAL_SECTION: "... nothing. (This can't be an error.)",
|
|
_MY_H_SECTION: 'a header this file implements',
|
|
_C_SECTION: 'C system header',
|
|
_CPP_SECTION: 'C++ system header',
|
|
_OTHER_H_SECTION: 'other header',
|
|
}
|
|
|
|
def __init__(self):
|
|
dict.__init__(self)
|
|
self.ResetSection()
|
|
|
|
def ResetSection(self):
|
|
# The name of the current section.
|
|
self._section = self._INITIAL_SECTION
|
|
# The path of last found header.
|
|
self._last_header = ''
|
|
|
|
def SetLastHeader(self, header_path):
|
|
self._last_header = header_path
|
|
|
|
def CanonicalizeAlphabeticalOrder(self, header_path):
|
|
"""Returns a path canonicalized for alphabetical comparison.
|
|
|
|
- replaces "-" with "_" so they both cmp the same.
|
|
- removes '-inl' since we don't require them to be after the main header.
|
|
- lowercase everything, just in case.
|
|
|
|
Args:
|
|
header_path: Path to be canonicalized.
|
|
|
|
Returns:
|
|
Canonicalized path.
|
|
"""
|
|
return header_path.replace('-inl.h', '.h').replace('-', '_').lower()
|
|
|
|
def IsInAlphabeticalOrder(self, clean_lines, linenum, header_path):
|
|
"""Check if a header is in alphabetical order with the previous header.
|
|
|
|
Args:
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
header_path: Canonicalized header to be checked.
|
|
|
|
Returns:
|
|
Returns true if the header is in alphabetical order.
|
|
"""
|
|
# If previous section is different from current section, _last_header will
|
|
# be reset to empty string, so it's always less than current header.
|
|
#
|
|
# If previous line was a blank line, assume that the headers are
|
|
# intentionally sorted the way they are.
|
|
if (self._last_header > header_path and
|
|
not Match(r'^\s*$', clean_lines.elided[linenum - 1])):
|
|
return False
|
|
return True
|
|
|
|
def CheckNextIncludeOrder(self, header_type):
|
|
"""Returns a non-empty error message if the next header is out of order.
|
|
|
|
This function also updates the internal state to be ready to check
|
|
the next include.
|
|
|
|
Args:
|
|
header_type: One of the _XXX_HEADER constants defined above.
|
|
|
|
Returns:
|
|
The empty string if the header is in the right order, or an
|
|
error message describing what's wrong.
|
|
|
|
"""
|
|
error_message = ('Found %s after %s' %
|
|
(self._TYPE_NAMES[header_type],
|
|
self._SECTION_NAMES[self._section]))
|
|
|
|
last_section = self._section
|
|
|
|
if header_type == _C_SYS_HEADER:
|
|
if self._section <= self._C_SECTION:
|
|
self._section = self._C_SECTION
|
|
else:
|
|
self._last_header = ''
|
|
return error_message
|
|
elif header_type == _CPP_SYS_HEADER:
|
|
if self._section <= self._CPP_SECTION:
|
|
self._section = self._CPP_SECTION
|
|
else:
|
|
self._last_header = ''
|
|
return error_message
|
|
elif header_type == _LIKELY_MY_HEADER:
|
|
if self._section <= self._MY_H_SECTION:
|
|
self._section = self._MY_H_SECTION
|
|
else:
|
|
self._section = self._OTHER_H_SECTION
|
|
elif header_type == _POSSIBLE_MY_HEADER:
|
|
if self._section <= self._MY_H_SECTION:
|
|
self._section = self._MY_H_SECTION
|
|
else:
|
|
# This will always be the fallback because we're not sure
|
|
# enough that the header is associated with this file.
|
|
self._section = self._OTHER_H_SECTION
|
|
else:
|
|
assert header_type == _OTHER_HEADER
|
|
self._section = self._OTHER_H_SECTION
|
|
|
|
if last_section != self._section:
|
|
self._last_header = ''
|
|
|
|
return ''
|
|
|
|
|
|
class _CppLintState(object):
|
|
"""Maintains module-wide state.."""
|
|
|
|
def __init__(self):
|
|
self.verbose_level = 1 # global setting.
|
|
self.error_count = 0 # global count of reported errors
|
|
# filters to apply when emitting error messages
|
|
self.filters = _DEFAULT_FILTERS[:]
|
|
self.counting = 'total' # In what way are we counting errors?
|
|
self.errors_by_category = {} # string to int dict storing error counts
|
|
|
|
# output format:
|
|
# "emacs" - format that emacs can parse (default)
|
|
# "vs7" - format that Microsoft Visual Studio 7 can parse
|
|
self.output_format = 'emacs'
|
|
|
|
def SetOutputFormat(self, output_format):
|
|
"""Sets the output format for errors."""
|
|
self.output_format = output_format
|
|
|
|
def SetVerboseLevel(self, level):
|
|
"""Sets the module's verbosity, and returns the previous setting."""
|
|
last_verbose_level = self.verbose_level
|
|
self.verbose_level = level
|
|
return last_verbose_level
|
|
|
|
def SetCountingStyle(self, counting_style):
|
|
"""Sets the module's counting options."""
|
|
self.counting = counting_style
|
|
|
|
def SetFilters(self, filters):
|
|
"""Sets the error-message filters.
|
|
|
|
These filters are applied when deciding whether to emit a given
|
|
error message.
|
|
|
|
Args:
|
|
filters: A string of comma-separated filters (eg "+whitespace/indent").
|
|
Each filter should start with + or -; else we die.
|
|
|
|
Raises:
|
|
ValueError: The comma-separated filters did not all start with '+' or '-'.
|
|
E.g. "-,+whitespace,-whitespace/indent,whitespace/badfilter"
|
|
"""
|
|
# Default filters always have less priority than the flag ones.
|
|
self.filters = _DEFAULT_FILTERS[:]
|
|
for filt in filters.split(','):
|
|
clean_filt = filt.strip()
|
|
if clean_filt:
|
|
self.filters.append(clean_filt)
|
|
for filt in self.filters:
|
|
if not (filt.startswith('+') or filt.startswith('-')):
|
|
raise ValueError('Every filter in --filters must start with + or -'
|
|
' (%s does not)' % filt)
|
|
|
|
def ResetErrorCounts(self):
|
|
"""Sets the module's error statistic back to zero."""
|
|
self.error_count = 0
|
|
self.errors_by_category = {}
|
|
|
|
def IncrementErrorCount(self, category):
|
|
"""Bumps the module's error statistic."""
|
|
self.error_count += 1
|
|
if self.counting in ('toplevel', 'detailed'):
|
|
if self.counting != 'detailed':
|
|
category = category.split('/')[0]
|
|
if category not in self.errors_by_category:
|
|
self.errors_by_category[category] = 0
|
|
self.errors_by_category[category] += 1
|
|
|
|
def PrintErrorCounts(self):
|
|
"""Print a summary of errors by category, and the total."""
|
|
for category, count in self.errors_by_category.iteritems():
|
|
sys.stderr.write('Category \'%s\' errors found: %d\n' %
|
|
(category, count))
|
|
sys.stderr.write('Total errors found: %d\n' % self.error_count)
|
|
|
|
_cpplint_state = _CppLintState()
|
|
|
|
|
|
def _OutputFormat():
|
|
"""Gets the module's output format."""
|
|
return _cpplint_state.output_format
|
|
|
|
|
|
def _SetOutputFormat(output_format):
|
|
"""Sets the module's output format."""
|
|
_cpplint_state.SetOutputFormat(output_format)
|
|
|
|
|
|
def _VerboseLevel():
|
|
"""Returns the module's verbosity setting."""
|
|
return _cpplint_state.verbose_level
|
|
|
|
|
|
def _SetVerboseLevel(level):
|
|
"""Sets the module's verbosity, and returns the previous setting."""
|
|
return _cpplint_state.SetVerboseLevel(level)
|
|
|
|
|
|
def _SetCountingStyle(level):
|
|
"""Sets the module's counting options."""
|
|
_cpplint_state.SetCountingStyle(level)
|
|
|
|
|
|
def _Filters():
|
|
"""Returns the module's list of output filters, as a list."""
|
|
return _cpplint_state.filters
|
|
|
|
|
|
def _SetFilters(filters):
|
|
"""Sets the module's error-message filters.
|
|
|
|
These filters are applied when deciding whether to emit a given
|
|
error message.
|
|
|
|
Args:
|
|
filters: A string of comma-separated filters (eg "whitespace/indent").
|
|
Each filter should start with + or -; else we die.
|
|
"""
|
|
_cpplint_state.SetFilters(filters)
|
|
|
|
|
|
class _FunctionState(object):
|
|
"""Tracks current function name and the number of lines in its body."""
|
|
|
|
_NORMAL_TRIGGER = 250 # for --v=0, 500 for --v=1, etc.
|
|
_TEST_TRIGGER = 400 # about 50% more than _NORMAL_TRIGGER.
|
|
|
|
def __init__(self):
|
|
self.in_a_function = False
|
|
self.lines_in_function = 0
|
|
self.current_function = ''
|
|
|
|
def Begin(self, function_name):
|
|
"""Start analyzing function body.
|
|
|
|
Args:
|
|
function_name: The name of the function being tracked.
|
|
"""
|
|
self.in_a_function = True
|
|
self.lines_in_function = 0
|
|
self.current_function = function_name
|
|
|
|
def Count(self):
|
|
"""Count line in current function body."""
|
|
if self.in_a_function:
|
|
self.lines_in_function += 1
|
|
|
|
def Check(self, error, filename, linenum):
|
|
"""Report if too many lines in function body.
|
|
|
|
Args:
|
|
error: The function to call with any errors found.
|
|
filename: The name of the current file.
|
|
linenum: The number of the line to check.
|
|
"""
|
|
if Match(r'T(EST|est)', self.current_function):
|
|
base_trigger = self._TEST_TRIGGER
|
|
else:
|
|
base_trigger = self._NORMAL_TRIGGER
|
|
trigger = base_trigger * 2**_VerboseLevel()
|
|
|
|
if self.lines_in_function > trigger:
|
|
error_level = int(math.log(self.lines_in_function / base_trigger, 2))
|
|
# 50 => 0, 100 => 1, 200 => 2, 400 => 3, 800 => 4, 1600 => 5, ...
|
|
if error_level > 5:
|
|
error_level = 5
|
|
error(filename, linenum, 'readability/fn_size', error_level,
|
|
'Small and focused functions are preferred:'
|
|
' %s has %d non-comment lines'
|
|
' (error triggered by exceeding %d lines).' % (
|
|
self.current_function, self.lines_in_function, trigger))
|
|
|
|
def End(self):
|
|
"""Stop analyzing function body."""
|
|
self.in_a_function = False
|
|
|
|
|
|
class _IncludeError(Exception):
|
|
"""Indicates a problem with the include order in a file."""
|
|
pass
|
|
|
|
|
|
class FileInfo:
|
|
"""Provides utility functions for filenames.
|
|
|
|
FileInfo provides easy access to the components of a file's path
|
|
relative to the project root.
|
|
"""
|
|
|
|
def __init__(self, filename):
|
|
self._filename = filename
|
|
|
|
def FullName(self):
|
|
"""Make Windows paths like Unix."""
|
|
return os.path.abspath(self._filename).replace('\\', '/')
|
|
|
|
def RepositoryName(self):
|
|
"""FullName after removing the local path to the repository.
|
|
|
|
If we have a real absolute path name here we can try to do something smart:
|
|
detecting the root of the checkout and truncating /path/to/checkout from
|
|
the name so that we get header guards that don't include things like
|
|
"C:\Documents and Settings\..." or "/home/username/..." in them and thus
|
|
people on different computers who have checked the source out to different
|
|
locations won't see bogus errors.
|
|
"""
|
|
fullname = self.FullName()
|
|
|
|
if os.path.exists(fullname):
|
|
project_dir = os.path.dirname(fullname)
|
|
|
|
if os.path.exists(os.path.join(project_dir, ".svn")):
|
|
# If there's a .svn file in the current directory, we recursively look
|
|
# up the directory tree for the top of the SVN checkout
|
|
root_dir = project_dir
|
|
one_up_dir = os.path.dirname(root_dir)
|
|
while os.path.exists(os.path.join(one_up_dir, ".svn")):
|
|
root_dir = os.path.dirname(root_dir)
|
|
one_up_dir = os.path.dirname(one_up_dir)
|
|
|
|
prefix = os.path.commonprefix([root_dir, project_dir])
|
|
return fullname[len(prefix) + 1:]
|
|
|
|
# Not SVN <= 1.6? Try to find a git, hg, or svn top level directory by
|
|
# searching up from the current path.
|
|
root_dir = os.path.dirname(fullname)
|
|
while (root_dir != os.path.dirname(root_dir) and
|
|
not os.path.exists(os.path.join(root_dir, ".git")) and
|
|
not os.path.exists(os.path.join(root_dir, ".hg")) and
|
|
not os.path.exists(os.path.join(root_dir, ".svn"))):
|
|
root_dir = os.path.dirname(root_dir)
|
|
|
|
if (os.path.exists(os.path.join(root_dir, ".git")) or
|
|
os.path.exists(os.path.join(root_dir, ".hg")) or
|
|
os.path.exists(os.path.join(root_dir, ".svn"))):
|
|
prefix = os.path.commonprefix([root_dir, project_dir])
|
|
return fullname[len(prefix) + 1:]
|
|
|
|
# Don't know what to do; header guard warnings may be wrong...
|
|
return fullname
|
|
|
|
def Split(self):
|
|
"""Splits the file into the directory, basename, and extension.
|
|
|
|
For 'chrome/browser/browser.cc', Split() would
|
|
return ('chrome/browser', 'browser', '.cc')
|
|
|
|
Returns:
|
|
A tuple of (directory, basename, extension).
|
|
"""
|
|
|
|
googlename = self.RepositoryName()
|
|
project, rest = os.path.split(googlename)
|
|
return (project,) + os.path.splitext(rest)
|
|
|
|
def BaseName(self):
|
|
"""File base name - text after the final slash, before the final period."""
|
|
return self.Split()[1]
|
|
|
|
def Extension(self):
|
|
"""File extension - text following the final period."""
|
|
return self.Split()[2]
|
|
|
|
def NoExtension(self):
|
|
"""File has no source file extension."""
|
|
return '/'.join(self.Split()[0:2])
|
|
|
|
def IsSource(self):
|
|
"""File has a source file extension."""
|
|
return self.Extension()[1:] in ('c', 'cc', 'cpp', 'cxx')
|
|
|
|
|
|
def _ShouldPrintError(category, confidence, linenum):
|
|
"""If confidence >= verbose, category passes filter and is not suppressed."""
|
|
|
|
# There are three ways we might decide not to print an error message:
|
|
# a "NOLINT(category)" comment appears in the source,
|
|
# the verbosity level isn't high enough, or the filters filter it out.
|
|
if IsErrorSuppressedByNolint(category, linenum):
|
|
return False
|
|
if confidence < _cpplint_state.verbose_level:
|
|
return False
|
|
|
|
is_filtered = False
|
|
for one_filter in _Filters():
|
|
if one_filter.startswith('-'):
|
|
if category.startswith(one_filter[1:]):
|
|
is_filtered = True
|
|
elif one_filter.startswith('+'):
|
|
if category.startswith(one_filter[1:]):
|
|
is_filtered = False
|
|
else:
|
|
assert False # should have been checked for in SetFilter.
|
|
if is_filtered:
|
|
return False
|
|
|
|
return True
|
|
|
|
|
|
def Error(filename, linenum, category, confidence, message):
|
|
"""Logs the fact we've found a lint error.
|
|
|
|
We log where the error was found, and also our confidence in the error,
|
|
that is, how certain we are this is a legitimate style regression, and
|
|
not a misidentification or a use that's sometimes justified.
|
|
|
|
False positives can be suppressed by the use of
|
|
"cpplint(category)" comments on the offending line. These are
|
|
parsed into _error_suppressions.
|
|
|
|
Args:
|
|
filename: The name of the file containing the error.
|
|
linenum: The number of the line containing the error.
|
|
category: A string used to describe the "category" this bug
|
|
falls under: "whitespace", say, or "runtime". Categories
|
|
may have a hierarchy separated by slashes: "whitespace/indent".
|
|
confidence: A number from 1-5 representing a confidence score for
|
|
the error, with 5 meaning that we are certain of the problem,
|
|
and 1 meaning that it could be a legitimate construct.
|
|
message: The error message.
|
|
"""
|
|
if _ShouldPrintError(category, confidence, linenum):
|
|
_cpplint_state.IncrementErrorCount(category)
|
|
if _cpplint_state.output_format == 'vs7':
|
|
sys.stderr.write('%s(%s): %s [%s] [%d]\n' % (
|
|
filename, linenum, message, category, confidence))
|
|
elif _cpplint_state.output_format == 'eclipse':
|
|
sys.stderr.write('%s:%s: warning: %s [%s] [%d]\n' % (
|
|
filename, linenum, message, category, confidence))
|
|
else:
|
|
sys.stderr.write('%s:%s: %s [%s] [%d]\n' % (
|
|
filename, linenum, message, category, confidence))
|
|
|
|
|
|
# Matches standard C++ escape sequences per 2.13.2.3 of the C++ standard.
|
|
_RE_PATTERN_CLEANSE_LINE_ESCAPES = re.compile(
|
|
r'\\([abfnrtv?"\\\']|\d+|x[0-9a-fA-F]+)')
|
|
# Matches strings. Escape codes should already be removed by ESCAPES.
|
|
_RE_PATTERN_CLEANSE_LINE_DOUBLE_QUOTES = re.compile(r'"[^"]*"')
|
|
# Matches characters. Escape codes should already be removed by ESCAPES.
|
|
_RE_PATTERN_CLEANSE_LINE_SINGLE_QUOTES = re.compile(r"'.'")
|
|
# Matches multi-line C++ comments.
|
|
# This RE is a little bit more complicated than one might expect, because we
|
|
# have to take care of space removals tools so we can handle comments inside
|
|
# statements better.
|
|
# The current rule is: We only clear spaces from both sides when we're at the
|
|
# end of the line. Otherwise, we try to remove spaces from the right side,
|
|
# if this doesn't work we try on left side but only if there's a non-character
|
|
# on the right.
|
|
_RE_PATTERN_CLEANSE_LINE_C_COMMENTS = re.compile(
|
|
r"""(\s*/\*.*\*/\s*$|
|
|
/\*.*\*/\s+|
|
|
\s+/\*.*\*/(?=\W)|
|
|
/\*.*\*/)""", re.VERBOSE)
|
|
|
|
|
|
def IsCppString(line):
|
|
"""Does line terminate so, that the next symbol is in string constant.
|
|
|
|
This function does not consider single-line nor multi-line comments.
|
|
|
|
Args:
|
|
line: is a partial line of code starting from the 0..n.
|
|
|
|
Returns:
|
|
True, if next character appended to 'line' is inside a
|
|
string constant.
|
|
"""
|
|
|
|
line = line.replace(r'\\', 'XX') # after this, \\" does not match to \"
|
|
return ((line.count('"') - line.count(r'\"') - line.count("'\"'")) & 1) == 1
|
|
|
|
|
|
def CleanseRawStrings(raw_lines):
|
|
"""Removes C++11 raw strings from lines.
|
|
|
|
Before:
|
|
static const char kData[] = R"(
|
|
multi-line string
|
|
)";
|
|
|
|
After:
|
|
static const char kData[] = ""
|
|
(replaced by blank line)
|
|
"";
|
|
|
|
Args:
|
|
raw_lines: list of raw lines.
|
|
|
|
Returns:
|
|
list of lines with C++11 raw strings replaced by empty strings.
|
|
"""
|
|
|
|
delimiter = None
|
|
lines_without_raw_strings = []
|
|
for line in raw_lines:
|
|
if delimiter:
|
|
# Inside a raw string, look for the end
|
|
end = line.find(delimiter)
|
|
if end >= 0:
|
|
# Found the end of the string, match leading space for this
|
|
# line and resume copying the original lines, and also insert
|
|
# a "" on the last line.
|
|
leading_space = Match(r'^(\s*)\S', line)
|
|
line = leading_space.group(1) + '""' + line[end + len(delimiter):]
|
|
delimiter = None
|
|
else:
|
|
# Haven't found the end yet, append a blank line.
|
|
line = ''
|
|
|
|
else:
|
|
# Look for beginning of a raw string.
|
|
# See 2.14.15 [lex.string] for syntax.
|
|
matched = Match(r'^(.*)\b(?:R|u8R|uR|UR|LR)"([^\s\\()]*)\((.*)$', line)
|
|
if matched:
|
|
delimiter = ')' + matched.group(2) + '"'
|
|
|
|
end = matched.group(3).find(delimiter)
|
|
if end >= 0:
|
|
# Raw string ended on same line
|
|
line = (matched.group(1) + '""' +
|
|
matched.group(3)[end + len(delimiter):])
|
|
delimiter = None
|
|
else:
|
|
# Start of a multi-line raw string
|
|
line = matched.group(1) + '""'
|
|
|
|
lines_without_raw_strings.append(line)
|
|
|
|
# TODO(unknown): if delimiter is not None here, we might want to
|
|
# emit a warning for unterminated string.
|
|
return lines_without_raw_strings
|
|
|
|
|
|
def FindNextMultiLineCommentStart(lines, lineix):
|
|
"""Find the beginning marker for a multiline comment."""
|
|
while lineix < len(lines):
|
|
if lines[lineix].strip().startswith('/*'):
|
|
# Only return this marker if the comment goes beyond this line
|
|
if lines[lineix].strip().find('*/', 2) < 0:
|
|
return lineix
|
|
lineix += 1
|
|
return len(lines)
|
|
|
|
|
|
def FindNextMultiLineCommentEnd(lines, lineix):
|
|
"""We are inside a comment, find the end marker."""
|
|
while lineix < len(lines):
|
|
if lines[lineix].strip().endswith('*/'):
|
|
return lineix
|
|
lineix += 1
|
|
return len(lines)
|
|
|
|
|
|
def RemoveMultiLineCommentsFromRange(lines, begin, end):
|
|
"""Clears a range of lines for multi-line comments."""
|
|
# Having // dummy comments makes the lines non-empty, so we will not get
|
|
# unnecessary blank line warnings later in the code.
|
|
for i in range(begin, end):
|
|
lines[i] = '// dummy'
|
|
|
|
|
|
def RemoveMultiLineComments(filename, lines, error):
|
|
"""Removes multiline (c-style) comments from lines."""
|
|
lineix = 0
|
|
while lineix < len(lines):
|
|
lineix_begin = FindNextMultiLineCommentStart(lines, lineix)
|
|
if lineix_begin >= len(lines):
|
|
return
|
|
lineix_end = FindNextMultiLineCommentEnd(lines, lineix_begin)
|
|
if lineix_end >= len(lines):
|
|
error(filename, lineix_begin + 1, 'readability/multiline_comment', 5,
|
|
'Could not find end of multi-line comment')
|
|
return
|
|
RemoveMultiLineCommentsFromRange(lines, lineix_begin, lineix_end + 1)
|
|
lineix = lineix_end + 1
|
|
|
|
|
|
def CleanseComments(line):
|
|
"""Removes //-comments and single-line C-style /* */ comments.
|
|
|
|
Args:
|
|
line: A line of C++ source.
|
|
|
|
Returns:
|
|
The line with single-line comments removed.
|
|
"""
|
|
commentpos = line.find('//')
|
|
if commentpos != -1 and not IsCppString(line[:commentpos]):
|
|
line = line[:commentpos].rstrip()
|
|
# get rid of /* ... */
|
|
return _RE_PATTERN_CLEANSE_LINE_C_COMMENTS.sub('', line)
|
|
|
|
|
|
class CleansedLines(object):
|
|
"""Holds 3 copies of all lines with different preprocessing applied to them.
|
|
|
|
1) elided member contains lines without strings and comments,
|
|
2) lines member contains lines without comments, and
|
|
3) raw_lines member contains all the lines without processing.
|
|
All these three members are of <type 'list'>, and of the same length.
|
|
"""
|
|
|
|
def __init__(self, lines):
|
|
self.elided = []
|
|
self.lines = []
|
|
self.raw_lines = lines
|
|
self.num_lines = len(lines)
|
|
self.lines_without_raw_strings = CleanseRawStrings(lines)
|
|
for linenum in range(len(self.lines_without_raw_strings)):
|
|
self.lines.append(CleanseComments(
|
|
self.lines_without_raw_strings[linenum]))
|
|
elided = self._CollapseStrings(self.lines_without_raw_strings[linenum])
|
|
self.elided.append(CleanseComments(elided))
|
|
|
|
def NumLines(self):
|
|
"""Returns the number of lines represented."""
|
|
return self.num_lines
|
|
|
|
@staticmethod
|
|
def _CollapseStrings(elided):
|
|
"""Collapses strings and chars on a line to simple "" or '' blocks.
|
|
|
|
We nix strings first so we're not fooled by text like '"http://"'
|
|
|
|
Args:
|
|
elided: The line being processed.
|
|
|
|
Returns:
|
|
The line with collapsed strings.
|
|
"""
|
|
if not _RE_PATTERN_INCLUDE.match(elided):
|
|
# Remove escaped characters first to make quote/single quote collapsing
|
|
# basic. Things that look like escaped characters shouldn't occur
|
|
# outside of strings and chars.
|
|
elided = _RE_PATTERN_CLEANSE_LINE_ESCAPES.sub('', elided)
|
|
elided = _RE_PATTERN_CLEANSE_LINE_SINGLE_QUOTES.sub("''", elided)
|
|
elided = _RE_PATTERN_CLEANSE_LINE_DOUBLE_QUOTES.sub('""', elided)
|
|
return elided
|
|
|
|
|
|
def FindEndOfExpressionInLine(line, startpos, depth, startchar, endchar):
|
|
"""Find the position just after the matching endchar.
|
|
|
|
Args:
|
|
line: a CleansedLines line.
|
|
startpos: start searching at this position.
|
|
depth: nesting level at startpos.
|
|
startchar: expression opening character.
|
|
endchar: expression closing character.
|
|
|
|
Returns:
|
|
On finding matching endchar: (index just after matching endchar, 0)
|
|
Otherwise: (-1, new depth at end of this line)
|
|
"""
|
|
for i in xrange(startpos, len(line)):
|
|
if line[i] == startchar:
|
|
depth += 1
|
|
elif line[i] == endchar:
|
|
depth -= 1
|
|
if depth == 0:
|
|
return (i + 1, 0)
|
|
return (-1, depth)
|
|
|
|
|
|
def CloseExpression(clean_lines, linenum, pos):
|
|
"""If input points to ( or { or [ or <, finds the position that closes it.
|
|
|
|
If lines[linenum][pos] points to a '(' or '{' or '[' or '<', finds the
|
|
linenum/pos that correspond to the closing of the expression.
|
|
|
|
Args:
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
pos: A position on the line.
|
|
|
|
Returns:
|
|
A tuple (line, linenum, pos) pointer *past* the closing brace, or
|
|
(line, len(lines), -1) if we never find a close. Note we ignore
|
|
strings and comments when matching; and the line we return is the
|
|
'cleansed' line at linenum.
|
|
"""
|
|
|
|
line = clean_lines.elided[linenum]
|
|
startchar = line[pos]
|
|
if startchar not in '({[<':
|
|
return (line, clean_lines.NumLines(), -1)
|
|
if startchar == '(': endchar = ')'
|
|
if startchar == '[': endchar = ']'
|
|
if startchar == '{': endchar = '}'
|
|
if startchar == '<': endchar = '>'
|
|
|
|
# Check first line
|
|
(end_pos, num_open) = FindEndOfExpressionInLine(
|
|
line, pos, 0, startchar, endchar)
|
|
if end_pos > -1:
|
|
return (line, linenum, end_pos)
|
|
|
|
# Continue scanning forward
|
|
while linenum < clean_lines.NumLines() - 1:
|
|
linenum += 1
|
|
line = clean_lines.elided[linenum]
|
|
(end_pos, num_open) = FindEndOfExpressionInLine(
|
|
line, 0, num_open, startchar, endchar)
|
|
if end_pos > -1:
|
|
return (line, linenum, end_pos)
|
|
|
|
# Did not find endchar before end of file, give up
|
|
return (line, clean_lines.NumLines(), -1)
|
|
|
|
|
|
def FindStartOfExpressionInLine(line, endpos, depth, startchar, endchar):
|
|
"""Find position at the matching startchar.
|
|
|
|
This is almost the reverse of FindEndOfExpressionInLine, but note
|
|
that the input position and returned position differs by 1.
|
|
|
|
Args:
|
|
line: a CleansedLines line.
|
|
endpos: start searching at this position.
|
|
depth: nesting level at endpos.
|
|
startchar: expression opening character.
|
|
endchar: expression closing character.
|
|
|
|
Returns:
|
|
On finding matching startchar: (index at matching startchar, 0)
|
|
Otherwise: (-1, new depth at beginning of this line)
|
|
"""
|
|
for i in xrange(endpos, -1, -1):
|
|
if line[i] == endchar:
|
|
depth += 1
|
|
elif line[i] == startchar:
|
|
depth -= 1
|
|
if depth == 0:
|
|
return (i, 0)
|
|
return (-1, depth)
|
|
|
|
|
|
def ReverseCloseExpression(clean_lines, linenum, pos):
|
|
"""If input points to ) or } or ] or >, finds the position that opens it.
|
|
|
|
If lines[linenum][pos] points to a ')' or '}' or ']' or '>', finds the
|
|
linenum/pos that correspond to the opening of the expression.
|
|
|
|
Args:
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
pos: A position on the line.
|
|
|
|
Returns:
|
|
A tuple (line, linenum, pos) pointer *at* the opening brace, or
|
|
(line, 0, -1) if we never find the matching opening brace. Note
|
|
we ignore strings and comments when matching; and the line we
|
|
return is the 'cleansed' line at linenum.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
endchar = line[pos]
|
|
if endchar not in ')}]>':
|
|
return (line, 0, -1)
|
|
if endchar == ')': startchar = '('
|
|
if endchar == ']': startchar = '['
|
|
if endchar == '}': startchar = '{'
|
|
if endchar == '>': startchar = '<'
|
|
|
|
# Check last line
|
|
(start_pos, num_open) = FindStartOfExpressionInLine(
|
|
line, pos, 0, startchar, endchar)
|
|
if start_pos > -1:
|
|
return (line, linenum, start_pos)
|
|
|
|
# Continue scanning backward
|
|
while linenum > 0:
|
|
linenum -= 1
|
|
line = clean_lines.elided[linenum]
|
|
(start_pos, num_open) = FindStartOfExpressionInLine(
|
|
line, len(line) - 1, num_open, startchar, endchar)
|
|
if start_pos > -1:
|
|
return (line, linenum, start_pos)
|
|
|
|
# Did not find startchar before beginning of file, give up
|
|
return (line, 0, -1)
|
|
|
|
|
|
def CheckForCopyright(filename, lines, error):
|
|
"""Logs an error if no Copyright message appears at the top of the file."""
|
|
|
|
# We'll say it should occur by line 10. Don't forget there's a
|
|
# dummy line at the front.
|
|
for line in xrange(1, min(len(lines), 11)):
|
|
if re.search(r'Copyright', lines[line], re.I): break
|
|
else: # means no copyright line was found
|
|
error(filename, 0, 'legal/copyright', 5,
|
|
'No copyright message found. '
|
|
'You should have a line: "Copyright [year] <Copyright Owner>"')
|
|
|
|
|
|
def GetHeaderGuardCPPVariable(filename):
|
|
"""Returns the CPP variable that should be used as a header guard.
|
|
|
|
Args:
|
|
filename: The name of a C++ header file.
|
|
|
|
Returns:
|
|
The CPP variable that should be used as a header guard in the
|
|
named file.
|
|
|
|
"""
|
|
|
|
# Restores original filename in case that cpplint is invoked from Emacs's
|
|
# flymake.
|
|
filename = re.sub(r'_flymake\.h$', '.h', filename)
|
|
filename = re.sub(r'/\.flymake/([^/]*)$', r'/\1', filename)
|
|
|
|
fileinfo = FileInfo(filename)
|
|
file_path_from_root = fileinfo.RepositoryName()
|
|
if _root:
|
|
file_path_from_root = re.sub('^' + _root + os.sep, '', file_path_from_root)
|
|
return re.sub(r'[-./\s]', '_', file_path_from_root).upper() + '_'
|
|
|
|
|
|
def CheckForHeaderGuard(filename, lines, error):
|
|
"""Checks that the file contains a header guard.
|
|
|
|
Logs an error if no #ifndef header guard is present. For other
|
|
headers, checks that the full pathname is used.
|
|
|
|
Args:
|
|
filename: The name of the C++ header file.
|
|
lines: An array of strings, each representing a line of the file.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
cppvar = GetHeaderGuardCPPVariable(filename)
|
|
|
|
ifndef = None
|
|
ifndef_linenum = 0
|
|
define = None
|
|
endif = None
|
|
endif_linenum = 0
|
|
for linenum, line in enumerate(lines):
|
|
linesplit = line.split()
|
|
if len(linesplit) >= 2:
|
|
# find the first occurrence of #ifndef and #define, save arg
|
|
if not ifndef and linesplit[0] == '#ifndef':
|
|
# set ifndef to the header guard presented on the #ifndef line.
|
|
ifndef = linesplit[1]
|
|
ifndef_linenum = linenum
|
|
if not define and linesplit[0] == '#define':
|
|
define = linesplit[1]
|
|
# find the last occurrence of #endif, save entire line
|
|
if line.startswith('#endif'):
|
|
endif = line
|
|
endif_linenum = linenum
|
|
|
|
if not ifndef:
|
|
error(filename, 0, 'build/header_guard', 5,
|
|
'No #ifndef header guard found, suggested CPP variable is: %s' %
|
|
cppvar)
|
|
return
|
|
|
|
if not define:
|
|
error(filename, 0, 'build/header_guard', 5,
|
|
'No #define header guard found, suggested CPP variable is: %s' %
|
|
cppvar)
|
|
return
|
|
|
|
# The guard should be PATH_FILE_H_, but we also allow PATH_FILE_H__
|
|
# for backward compatibility.
|
|
if ifndef != cppvar:
|
|
error_level = 0
|
|
if ifndef != cppvar + '_':
|
|
error_level = 5
|
|
|
|
ParseNolintSuppressions(filename, lines[ifndef_linenum], ifndef_linenum,
|
|
error)
|
|
error(filename, ifndef_linenum, 'build/header_guard', error_level,
|
|
'#ifndef header guard has wrong style, please use: %s' % cppvar)
|
|
|
|
if define != ifndef:
|
|
error(filename, 0, 'build/header_guard', 5,
|
|
'#ifndef and #define don\'t match, suggested CPP variable is: %s' %
|
|
cppvar)
|
|
return
|
|
|
|
if endif != ('#endif // %s' % cppvar):
|
|
error_level = 0
|
|
if endif != ('#endif // %s' % (cppvar + '_')):
|
|
error_level = 5
|
|
|
|
ParseNolintSuppressions(filename, lines[endif_linenum], endif_linenum,
|
|
error)
|
|
error(filename, endif_linenum, 'build/header_guard', error_level,
|
|
'#endif line should be "#endif // %s"' % cppvar)
|
|
|
|
|
|
def CheckForBadCharacters(filename, lines, error):
|
|
"""Logs an error for each line containing bad characters.
|
|
|
|
Two kinds of bad characters:
|
|
|
|
1. Unicode replacement characters: These indicate that either the file
|
|
contained invalid UTF-8 (likely) or Unicode replacement characters (which
|
|
it shouldn't). Note that it's possible for this to throw off line
|
|
numbering if the invalid UTF-8 occurred adjacent to a newline.
|
|
|
|
2. NUL bytes. These are problematic for some tools.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
lines: An array of strings, each representing a line of the file.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
for linenum, line in enumerate(lines):
|
|
if u'\ufffd' in line:
|
|
error(filename, linenum, 'readability/utf8', 5,
|
|
'Line contains invalid UTF-8 (or Unicode replacement character).')
|
|
if '\0' in line:
|
|
error(filename, linenum, 'readability/nul', 5, 'Line contains NUL byte.')
|
|
|
|
|
|
def CheckForNewlineAtEOF(filename, lines, error):
|
|
"""Logs an error if there is no newline char at the end of the file.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
lines: An array of strings, each representing a line of the file.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
# The array lines() was created by adding two newlines to the
|
|
# original file (go figure), then splitting on \n.
|
|
# To verify that the file ends in \n, we just have to make sure the
|
|
# last-but-two element of lines() exists and is empty.
|
|
if len(lines) < 3 or lines[-2]:
|
|
error(filename, len(lines) - 2, 'whitespace/ending_newline', 5,
|
|
'Could not find a newline character at the end of the file.')
|
|
|
|
|
|
def CheckForMultilineCommentsAndStrings(filename, clean_lines, linenum, error):
|
|
"""Logs an error if we see /* ... */ or "..." that extend past one line.
|
|
|
|
/* ... */ comments are legit inside macros, for one line.
|
|
Otherwise, we prefer // comments, so it's ok to warn about the
|
|
other. Likewise, it's ok for strings to extend across multiple
|
|
lines, as long as a line continuation character (backslash)
|
|
terminates each line. Although not currently prohibited by the C++
|
|
style guide, it's ugly and unnecessary. We don't do well with either
|
|
in this lint program, so we warn about both.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
|
|
# Remove all \\ (escaped backslashes) from the line. They are OK, and the
|
|
# second (escaped) slash may trigger later \" detection erroneously.
|
|
line = line.replace('\\\\', '')
|
|
|
|
if line.count('/*') > line.count('*/'):
|
|
error(filename, linenum, 'readability/multiline_comment', 5,
|
|
'Complex multi-line /*...*/-style comment found. '
|
|
'Lint may give bogus warnings. '
|
|
'Consider replacing these with //-style comments, '
|
|
'with #if 0...#endif, '
|
|
'or with more clearly structured multi-line comments.')
|
|
|
|
if (line.count('"') - line.count('\\"')) % 2:
|
|
error(filename, linenum, 'readability/multiline_string', 5,
|
|
'Multi-line string ("...") found. This lint script doesn\'t '
|
|
'do well with such strings, and may give bogus warnings. '
|
|
'Use C++11 raw strings or concatenation instead.')
|
|
|
|
|
|
threading_list = (
|
|
('asctime(', 'asctime_r('),
|
|
('ctime(', 'ctime_r('),
|
|
('getgrgid(', 'getgrgid_r('),
|
|
('getgrnam(', 'getgrnam_r('),
|
|
('getlogin(', 'getlogin_r('),
|
|
('getpwnam(', 'getpwnam_r('),
|
|
('getpwuid(', 'getpwuid_r('),
|
|
('gmtime(', 'gmtime_r('),
|
|
('localtime(', 'localtime_r('),
|
|
('rand(', 'rand_r('),
|
|
('strtok(', 'strtok_r('),
|
|
('ttyname(', 'ttyname_r('),
|
|
)
|
|
|
|
|
|
def CheckPosixThreading(filename, clean_lines, linenum, error):
|
|
"""Checks for calls to thread-unsafe functions.
|
|
|
|
Much code has been originally written without consideration of
|
|
multi-threading. Also, engineers are relying on their old experience;
|
|
they have learned posix before threading extensions were added. These
|
|
tests guide the engineers to use thread-safe functions (when using
|
|
posix directly).
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
for single_thread_function, multithread_safe_function in threading_list:
|
|
ix = line.find(single_thread_function)
|
|
# Comparisons made explicit for clarity -- pylint: disable=g-explicit-bool-comparison
|
|
if ix >= 0 and (ix == 0 or (not line[ix - 1].isalnum() and
|
|
line[ix - 1] not in ('_', '.', '>'))):
|
|
error(filename, linenum, 'runtime/threadsafe_fn', 2,
|
|
'Consider using ' + multithread_safe_function +
|
|
'...) instead of ' + single_thread_function +
|
|
'...) for improved thread safety.')
|
|
|
|
|
|
def CheckVlogArguments(filename, clean_lines, linenum, error):
|
|
"""Checks that VLOG() is only used for defining a logging level.
|
|
|
|
For example, VLOG(2) is correct. VLOG(INFO), VLOG(WARNING), VLOG(ERROR), and
|
|
VLOG(FATAL) are not.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
if Search(r'\bVLOG\((INFO|ERROR|WARNING|DFATAL|FATAL)\)', line):
|
|
error(filename, linenum, 'runtime/vlog', 5,
|
|
'VLOG() should be used with numeric verbosity level. '
|
|
'Use LOG() if you want symbolic severity levels.')
|
|
|
|
|
|
# Matches invalid increment: *count++, which moves pointer instead of
|
|
# incrementing a value.
|
|
_RE_PATTERN_INVALID_INCREMENT = re.compile(
|
|
r'^\s*\*\w+(\+\+|--);')
|
|
|
|
|
|
def CheckInvalidIncrement(filename, clean_lines, linenum, error):
|
|
"""Checks for invalid increment *count++.
|
|
|
|
For example following function:
|
|
void increment_counter(int* count) {
|
|
*count++;
|
|
}
|
|
is invalid, because it effectively does count++, moving pointer, and should
|
|
be replaced with ++*count, (*count)++ or *count += 1.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
if _RE_PATTERN_INVALID_INCREMENT.match(line):
|
|
error(filename, linenum, 'runtime/invalid_increment', 5,
|
|
'Changing pointer instead of value (or unused value of operator*).')
|
|
|
|
|
|
class _BlockInfo(object):
|
|
"""Stores information about a generic block of code."""
|
|
|
|
def __init__(self, seen_open_brace):
|
|
self.seen_open_brace = seen_open_brace
|
|
self.open_parentheses = 0
|
|
self.inline_asm = _NO_ASM
|
|
|
|
def CheckBegin(self, filename, clean_lines, linenum, error):
|
|
"""Run checks that applies to text up to the opening brace.
|
|
|
|
This is mostly for checking the text after the class identifier
|
|
and the "{", usually where the base class is specified. For other
|
|
blocks, there isn't much to check, so we always pass.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
pass
|
|
|
|
def CheckEnd(self, filename, clean_lines, linenum, error):
|
|
"""Run checks that applies to text after the closing brace.
|
|
|
|
This is mostly used for checking end of namespace comments.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
pass
|
|
|
|
|
|
class _ClassInfo(_BlockInfo):
|
|
"""Stores information about a class."""
|
|
|
|
def __init__(self, name, class_or_struct, clean_lines, linenum):
|
|
_BlockInfo.__init__(self, False)
|
|
self.name = name
|
|
self.starting_linenum = linenum
|
|
self.is_derived = False
|
|
if class_or_struct == 'struct':
|
|
self.access = 'public'
|
|
self.is_struct = True
|
|
else:
|
|
self.access = 'private'
|
|
self.is_struct = False
|
|
|
|
# Remember initial indentation level for this class. Using raw_lines here
|
|
# instead of elided to account for leading comments.
|
|
initial_indent = Match(r'^( *)\S', clean_lines.raw_lines[linenum])
|
|
if initial_indent:
|
|
self.class_indent = len(initial_indent.group(1))
|
|
else:
|
|
self.class_indent = 0
|
|
|
|
# Try to find the end of the class. This will be confused by things like:
|
|
# class A {
|
|
# } *x = { ...
|
|
#
|
|
# But it's still good enough for CheckSectionSpacing.
|
|
self.last_line = 0
|
|
depth = 0
|
|
for i in range(linenum, clean_lines.NumLines()):
|
|
line = clean_lines.elided[i]
|
|
depth += line.count('{') - line.count('}')
|
|
if not depth:
|
|
self.last_line = i
|
|
break
|
|
|
|
def CheckBegin(self, filename, clean_lines, linenum, error):
|
|
# Look for a bare ':'
|
|
if Search('(^|[^:]):($|[^:])', clean_lines.elided[linenum]):
|
|
self.is_derived = True
|
|
|
|
def CheckEnd(self, filename, clean_lines, linenum, error):
|
|
# Check that closing brace is aligned with beginning of the class.
|
|
# Only do this if the closing brace is indented by only whitespaces.
|
|
# This means we will not check single-line class definitions.
|
|
indent = Match(r'^( *)\}', clean_lines.elided[linenum])
|
|
if indent and len(indent.group(1)) != self.class_indent:
|
|
if self.is_struct:
|
|
parent = 'struct ' + self.name
|
|
else:
|
|
parent = 'class ' + self.name
|
|
error(filename, linenum, 'whitespace/indent', 3,
|
|
'Closing brace should be aligned with beginning of %s' % parent)
|
|
|
|
|
|
class _NamespaceInfo(_BlockInfo):
|
|
"""Stores information about a namespace."""
|
|
|
|
def __init__(self, name, linenum):
|
|
_BlockInfo.__init__(self, False)
|
|
self.name = name or ''
|
|
self.starting_linenum = linenum
|
|
|
|
def CheckEnd(self, filename, clean_lines, linenum, error):
|
|
"""Check end of namespace comments."""
|
|
line = clean_lines.raw_lines[linenum]
|
|
|
|
# Check how many lines is enclosed in this namespace. Don't issue
|
|
# warning for missing namespace comments if there aren't enough
|
|
# lines. However, do apply checks if there is already an end of
|
|
# namespace comment and it's incorrect.
|
|
#
|
|
# TODO(unknown): We always want to check end of namespace comments
|
|
# if a namespace is large, but sometimes we also want to apply the
|
|
# check if a short namespace contained nontrivial things (something
|
|
# other than forward declarations). There is currently no logic on
|
|
# deciding what these nontrivial things are, so this check is
|
|
# triggered by namespace size only, which works most of the time.
|
|
if (linenum - self.starting_linenum < 10
|
|
and not Match(r'};*\s*(//|/\*).*\bnamespace\b', line)):
|
|
return
|
|
|
|
# Look for matching comment at end of namespace.
|
|
#
|
|
# Note that we accept C style "/* */" comments for terminating
|
|
# namespaces, so that code that terminate namespaces inside
|
|
# preprocessor macros can be cpplint clean.
|
|
#
|
|
# We also accept stuff like "// end of namespace <name>." with the
|
|
# period at the end.
|
|
#
|
|
# Besides these, we don't accept anything else, otherwise we might
|
|
# get false negatives when existing comment is a substring of the
|
|
# expected namespace.
|
|
if self.name:
|
|
# Named namespace
|
|
if not Match((r'};*\s*(//|/\*).*\bnamespace\s+' + re.escape(self.name) +
|
|
r'[\*/\.\\\s]*$'),
|
|
line):
|
|
error(filename, linenum, 'readability/namespace', 5,
|
|
'Namespace should be terminated with "// namespace %s"' %
|
|
self.name)
|
|
else:
|
|
# Anonymous namespace
|
|
if not Match(r'};*\s*(//|/\*).*\bnamespace[\*/\.\\\s]*$', line):
|
|
error(filename, linenum, 'readability/namespace', 5,
|
|
'Namespace should be terminated with "// namespace"')
|
|
|
|
|
|
class _PreprocessorInfo(object):
|
|
"""Stores checkpoints of nesting stacks when #if/#else is seen."""
|
|
|
|
def __init__(self, stack_before_if):
|
|
# The entire nesting stack before #if
|
|
self.stack_before_if = stack_before_if
|
|
|
|
# The entire nesting stack up to #else
|
|
self.stack_before_else = []
|
|
|
|
# Whether we have already seen #else or #elif
|
|
self.seen_else = False
|
|
|
|
|
|
class _NestingState(object):
|
|
"""Holds states related to parsing braces."""
|
|
|
|
def __init__(self):
|
|
# Stack for tracking all braces. An object is pushed whenever we
|
|
# see a "{", and popped when we see a "}". Only 3 types of
|
|
# objects are possible:
|
|
# - _ClassInfo: a class or struct.
|
|
# - _NamespaceInfo: a namespace.
|
|
# - _BlockInfo: some other type of block.
|
|
self.stack = []
|
|
|
|
# Stack of _PreprocessorInfo objects.
|
|
self.pp_stack = []
|
|
|
|
def SeenOpenBrace(self):
|
|
"""Check if we have seen the opening brace for the innermost block.
|
|
|
|
Returns:
|
|
True if we have seen the opening brace, False if the innermost
|
|
block is still expecting an opening brace.
|
|
"""
|
|
return (not self.stack) or self.stack[-1].seen_open_brace
|
|
|
|
def InNamespaceBody(self):
|
|
"""Check if we are currently one level inside a namespace body.
|
|
|
|
Returns:
|
|
True if top of the stack is a namespace block, False otherwise.
|
|
"""
|
|
return self.stack and isinstance(self.stack[-1], _NamespaceInfo)
|
|
|
|
def UpdatePreprocessor(self, line):
|
|
"""Update preprocessor stack.
|
|
|
|
We need to handle preprocessors due to classes like this:
|
|
#ifdef SWIG
|
|
struct ResultDetailsPageElementExtensionPoint {
|
|
#else
|
|
struct ResultDetailsPageElementExtensionPoint : public Extension {
|
|
#endif
|
|
|
|
We make the following assumptions (good enough for most files):
|
|
- Preprocessor condition evaluates to true from #if up to first
|
|
#else/#elif/#endif.
|
|
|
|
- Preprocessor condition evaluates to false from #else/#elif up
|
|
to #endif. We still perform lint checks on these lines, but
|
|
these do not affect nesting stack.
|
|
|
|
Args:
|
|
line: current line to check.
|
|
"""
|
|
if Match(r'^\s*#\s*(if|ifdef|ifndef)\b', line):
|
|
# Beginning of #if block, save the nesting stack here. The saved
|
|
# stack will allow us to restore the parsing state in the #else case.
|
|
self.pp_stack.append(_PreprocessorInfo(copy.deepcopy(self.stack)))
|
|
elif Match(r'^\s*#\s*(else|elif)\b', line):
|
|
# Beginning of #else block
|
|
if self.pp_stack:
|
|
if not self.pp_stack[-1].seen_else:
|
|
# This is the first #else or #elif block. Remember the
|
|
# whole nesting stack up to this point. This is what we
|
|
# keep after the #endif.
|
|
self.pp_stack[-1].seen_else = True
|
|
self.pp_stack[-1].stack_before_else = copy.deepcopy(self.stack)
|
|
|
|
# Restore the stack to how it was before the #if
|
|
self.stack = copy.deepcopy(self.pp_stack[-1].stack_before_if)
|
|
else:
|
|
# TODO(unknown): unexpected #else, issue warning?
|
|
pass
|
|
elif Match(r'^\s*#\s*endif\b', line):
|
|
# End of #if or #else blocks.
|
|
if self.pp_stack:
|
|
# If we saw an #else, we will need to restore the nesting
|
|
# stack to its former state before the #else, otherwise we
|
|
# will just continue from where we left off.
|
|
if self.pp_stack[-1].seen_else:
|
|
# Here we can just use a shallow copy since we are the last
|
|
# reference to it.
|
|
self.stack = self.pp_stack[-1].stack_before_else
|
|
# Drop the corresponding #if
|
|
self.pp_stack.pop()
|
|
else:
|
|
# TODO(unknown): unexpected #endif, issue warning?
|
|
pass
|
|
|
|
def Update(self, filename, clean_lines, linenum, error):
|
|
"""Update nesting state with current line.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
|
|
# Update pp_stack first
|
|
self.UpdatePreprocessor(line)
|
|
|
|
# Count parentheses. This is to avoid adding struct arguments to
|
|
# the nesting stack.
|
|
if self.stack:
|
|
inner_block = self.stack[-1]
|
|
depth_change = line.count('(') - line.count(')')
|
|
inner_block.open_parentheses += depth_change
|
|
|
|
# Also check if we are starting or ending an inline assembly block.
|
|
if inner_block.inline_asm in (_NO_ASM, _END_ASM):
|
|
if (depth_change != 0 and
|
|
inner_block.open_parentheses == 1 and
|
|
_MATCH_ASM.match(line)):
|
|
# Enter assembly block
|
|
inner_block.inline_asm = _INSIDE_ASM
|
|
else:
|
|
# Not entering assembly block. If previous line was _END_ASM,
|
|
# we will now shift to _NO_ASM state.
|
|
inner_block.inline_asm = _NO_ASM
|
|
elif (inner_block.inline_asm == _INSIDE_ASM and
|
|
inner_block.open_parentheses == 0):
|
|
# Exit assembly block
|
|
inner_block.inline_asm = _END_ASM
|
|
|
|
# Consume namespace declaration at the beginning of the line. Do
|
|
# this in a loop so that we catch same line declarations like this:
|
|
# namespace proto2 { namespace bridge { class MessageSet; } }
|
|
while True:
|
|
# Match start of namespace. The "\b\s*" below catches namespace
|
|
# declarations even if it weren't followed by a whitespace, this
|
|
# is so that we don't confuse our namespace checker. The
|
|
# missing spaces will be flagged by CheckSpacing.
|
|
namespace_decl_match = Match(r'^\s*namespace\b\s*([:\w]+)?(.*)$', line)
|
|
if not namespace_decl_match:
|
|
break
|
|
|
|
new_namespace = _NamespaceInfo(namespace_decl_match.group(1), linenum)
|
|
self.stack.append(new_namespace)
|
|
|
|
line = namespace_decl_match.group(2)
|
|
if line.find('{') != -1:
|
|
new_namespace.seen_open_brace = True
|
|
line = line[line.find('{') + 1:]
|
|
|
|
# Look for a class declaration in whatever is left of the line
|
|
# after parsing namespaces. The regexp accounts for decorated classes
|
|
# such as in:
|
|
# class LOCKABLE API Object {
|
|
# };
|
|
#
|
|
# Templates with class arguments may confuse the parser, for example:
|
|
# template <class T
|
|
# class Comparator = less<T>,
|
|
# class Vector = vector<T> >
|
|
# class HeapQueue {
|
|
#
|
|
# Because this parser has no nesting state about templates, by the
|
|
# time it saw "class Comparator", it may think that it's a new class.
|
|
# Nested templates have a similar problem:
|
|
# template <
|
|
# typename ExportedType,
|
|
# typename TupleType,
|
|
# template <typename, typename> class ImplTemplate>
|
|
#
|
|
# To avoid these cases, we ignore classes that are followed by '=' or '>'
|
|
class_decl_match = Match(
|
|
r'\s*(template\s*<[\w\s<>,:]*>\s*)?'
|
|
r'(class|struct)\s+([A-Z_]+\s+)*(\w+(?:::\w+)*)'
|
|
r'(([^=>]|<[^<>]*>|<[^<>]*<[^<>]*>\s*>)*)$', line)
|
|
if (class_decl_match and
|
|
(not self.stack or self.stack[-1].open_parentheses == 0)):
|
|
self.stack.append(_ClassInfo(
|
|
class_decl_match.group(4), class_decl_match.group(2),
|
|
clean_lines, linenum))
|
|
line = class_decl_match.group(5)
|
|
|
|
# If we have not yet seen the opening brace for the innermost block,
|
|
# run checks here.
|
|
if not self.SeenOpenBrace():
|
|
self.stack[-1].CheckBegin(filename, clean_lines, linenum, error)
|
|
|
|
# Update access control if we are inside a class/struct
|
|
if self.stack and isinstance(self.stack[-1], _ClassInfo):
|
|
classinfo = self.stack[-1]
|
|
access_match = Match(
|
|
r'^(.*)\b(public|private|protected|signals)(\s+(?:slots\s*)?)?'
|
|
r':(?:[^:]|$)',
|
|
line)
|
|
if access_match:
|
|
classinfo.access = access_match.group(2)
|
|
|
|
# Check that access keywords are indented +1 space. Skip this
|
|
# check if the keywords are not preceded by whitespaces.
|
|
indent = access_match.group(1)
|
|
if (len(indent) != classinfo.class_indent + 1 and
|
|
Match(r'^\s*$', indent)):
|
|
if classinfo.is_struct:
|
|
parent = 'struct ' + classinfo.name
|
|
else:
|
|
parent = 'class ' + classinfo.name
|
|
slots = ''
|
|
if access_match.group(3):
|
|
slots = access_match.group(3)
|
|
error(filename, linenum, 'whitespace/indent', 3,
|
|
'%s%s: should be indented +1 space inside %s' % (
|
|
access_match.group(2), slots, parent))
|
|
|
|
# Consume braces or semicolons from what's left of the line
|
|
while True:
|
|
# Match first brace, semicolon, or closed parenthesis.
|
|
matched = Match(r'^[^{;)}]*([{;)}])(.*)$', line)
|
|
if not matched:
|
|
break
|
|
|
|
token = matched.group(1)
|
|
if token == '{':
|
|
# If namespace or class hasn't seen a opening brace yet, mark
|
|
# namespace/class head as complete. Push a new block onto the
|
|
# stack otherwise.
|
|
if not self.SeenOpenBrace():
|
|
self.stack[-1].seen_open_brace = True
|
|
else:
|
|
self.stack.append(_BlockInfo(True))
|
|
if _MATCH_ASM.match(line):
|
|
self.stack[-1].inline_asm = _BLOCK_ASM
|
|
elif token == ';' or token == ')':
|
|
# If we haven't seen an opening brace yet, but we already saw
|
|
# a semicolon, this is probably a forward declaration. Pop
|
|
# the stack for these.
|
|
#
|
|
# Similarly, if we haven't seen an opening brace yet, but we
|
|
# already saw a closing parenthesis, then these are probably
|
|
# function arguments with extra "class" or "struct" keywords.
|
|
# Also pop these stack for these.
|
|
if not self.SeenOpenBrace():
|
|
self.stack.pop()
|
|
else: # token == '}'
|
|
# Perform end of block checks and pop the stack.
|
|
if self.stack:
|
|
self.stack[-1].CheckEnd(filename, clean_lines, linenum, error)
|
|
self.stack.pop()
|
|
line = matched.group(2)
|
|
|
|
def InnermostClass(self):
|
|
"""Get class info on the top of the stack.
|
|
|
|
Returns:
|
|
A _ClassInfo object if we are inside a class, or None otherwise.
|
|
"""
|
|
for i in range(len(self.stack), 0, -1):
|
|
classinfo = self.stack[i - 1]
|
|
if isinstance(classinfo, _ClassInfo):
|
|
return classinfo
|
|
return None
|
|
|
|
def CheckCompletedBlocks(self, filename, error):
|
|
"""Checks that all classes and namespaces have been completely parsed.
|
|
|
|
Call this when all lines in a file have been processed.
|
|
Args:
|
|
filename: The name of the current file.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
# Note: This test can result in false positives if #ifdef constructs
|
|
# get in the way of brace matching. See the testBuildClass test in
|
|
# cpplint_unittest.py for an example of this.
|
|
for obj in self.stack:
|
|
if isinstance(obj, _ClassInfo):
|
|
error(filename, obj.starting_linenum, 'build/class', 5,
|
|
'Failed to find complete declaration of class %s' %
|
|
obj.name)
|
|
elif isinstance(obj, _NamespaceInfo):
|
|
error(filename, obj.starting_linenum, 'build/namespaces', 5,
|
|
'Failed to find complete declaration of namespace %s' %
|
|
obj.name)
|
|
|
|
|
|
def CheckForNonStandardConstructs(filename, clean_lines, linenum,
|
|
nesting_state, error):
|
|
r"""Logs an error if we see certain non-ANSI constructs ignored by gcc-2.
|
|
|
|
Complain about several constructs which gcc-2 accepts, but which are
|
|
not standard C++. Warning about these in lint is one way to ease the
|
|
transition to new compilers.
|
|
- put storage class first (e.g. "static const" instead of "const static").
|
|
- "%lld" instead of %qd" in printf-type functions.
|
|
- "%1$d" is non-standard in printf-type functions.
|
|
- "\%" is an undefined character escape sequence.
|
|
- text after #endif is not allowed.
|
|
- invalid inner-style forward declaration.
|
|
- >? and <? operators, and their >?= and <?= cousins.
|
|
|
|
Additionally, check for constructor/destructor style violations and reference
|
|
members, as it is very convenient to do so while checking for
|
|
gcc-2 compliance.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: A callable to which errors are reported, which takes 4 arguments:
|
|
filename, line number, error level, and message
|
|
"""
|
|
|
|
# Remove comments from the line, but leave in strings for now.
|
|
line = clean_lines.lines[linenum]
|
|
|
|
if Search(r'printf\s*\(.*".*%[-+ ]?\d*q', line):
|
|
error(filename, linenum, 'runtime/printf_format', 3,
|
|
'%q in format strings is deprecated. Use %ll instead.')
|
|
|
|
if Search(r'printf\s*\(.*".*%\d+\$', line):
|
|
error(filename, linenum, 'runtime/printf_format', 2,
|
|
'%N$ formats are unconventional. Try rewriting to avoid them.')
|
|
|
|
# Remove escaped backslashes before looking for undefined escapes.
|
|
line = line.replace('\\\\', '')
|
|
|
|
if Search(r'("|\').*\\(%|\[|\(|{)', line):
|
|
error(filename, linenum, 'build/printf_format', 3,
|
|
'%, [, (, and { are undefined character escapes. Unescape them.')
|
|
|
|
# For the rest, work with both comments and strings removed.
|
|
line = clean_lines.elided[linenum]
|
|
|
|
if Search(r'\b(const|volatile|void|char|short|int|long'
|
|
r'|float|double|signed|unsigned'
|
|
r'|schar|u?int8|u?int16|u?int32|u?int64)'
|
|
r'\s+(register|static|extern|typedef)\b',
|
|
line):
|
|
error(filename, linenum, 'build/storage_class', 5,
|
|
'Storage class (static, extern, typedef, etc) should be first.')
|
|
|
|
if Match(r'\s*#\s*endif\s*[^/\s]+', line):
|
|
error(filename, linenum, 'build/endif_comment', 5,
|
|
'Uncommented text after #endif is non-standard. Use a comment.')
|
|
|
|
if Match(r'\s*class\s+(\w+\s*::\s*)+\w+\s*;', line):
|
|
error(filename, linenum, 'build/forward_decl', 5,
|
|
'Inner-style forward declarations are invalid. Remove this line.')
|
|
|
|
if Search(r'(\w+|[+-]?\d+(\.\d*)?)\s*(<|>)\?=?\s*(\w+|[+-]?\d+)(\.\d*)?',
|
|
line):
|
|
error(filename, linenum, 'build/deprecated', 3,
|
|
'>? and <? (max and min) operators are non-standard and deprecated.')
|
|
|
|
if Search(r'^\s*const\s*string\s*&\s*\w+\s*;', line):
|
|
# TODO(unknown): Could it be expanded safely to arbitrary references,
|
|
# without triggering too many false positives? The first
|
|
# attempt triggered 5 warnings for mostly benign code in the regtest, hence
|
|
# the restriction.
|
|
# Here's the original regexp, for the reference:
|
|
# type_name = r'\w+((\s*::\s*\w+)|(\s*<\s*\w+?\s*>))?'
|
|
# r'\s*const\s*' + type_name + '\s*&\s*\w+\s*;'
|
|
error(filename, linenum, 'runtime/member_string_references', 2,
|
|
'const string& members are dangerous. It is much better to use '
|
|
'alternatives, such as pointers or simple constants.')
|
|
|
|
# Everything else in this function operates on class declarations.
|
|
# Return early if the top of the nesting stack is not a class, or if
|
|
# the class head is not completed yet.
|
|
classinfo = nesting_state.InnermostClass()
|
|
if not classinfo or not classinfo.seen_open_brace:
|
|
return
|
|
|
|
# The class may have been declared with namespace or classname qualifiers.
|
|
# The constructor and destructor will not have those qualifiers.
|
|
base_classname = classinfo.name.split('::')[-1]
|
|
|
|
# Look for single-argument constructors that aren't marked explicit.
|
|
# Technically a valid construct, but against style.
|
|
args = Match(r'\s+(?:inline\s+)?%s\s*\(([^,()]+)\)'
|
|
% re.escape(base_classname),
|
|
line)
|
|
if (args and
|
|
args.group(1) != 'void' and
|
|
not Match(r'(const\s+)?%s(\s+const)?\s*(?:<\w+>\s*)?&'
|
|
% re.escape(base_classname), args.group(1).strip())):
|
|
error(filename, linenum, 'runtime/explicit', 5,
|
|
'Single-argument constructors should be marked explicit.')
|
|
|
|
|
|
def CheckSpacingForFunctionCall(filename, line, linenum, error):
|
|
"""Checks for the correctness of various spacing around function calls.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
line: The text of the line to check.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
# Since function calls often occur inside if/for/while/switch
|
|
# expressions - which have their own, more liberal conventions - we
|
|
# first see if we should be looking inside such an expression for a
|
|
# function call, to which we can apply more strict standards.
|
|
fncall = line # if there's no control flow construct, look at whole line
|
|
for pattern in (r'\bif\s*\((.*)\)\s*{',
|
|
r'\bfor\s*\((.*)\)\s*{',
|
|
r'\bwhile\s*\((.*)\)\s*[{;]',
|
|
r'\bswitch\s*\((.*)\)\s*{'):
|
|
match = Search(pattern, line)
|
|
if match:
|
|
fncall = match.group(1) # look inside the parens for function calls
|
|
break
|
|
|
|
# Except in if/for/while/switch, there should never be space
|
|
# immediately inside parens (eg "f( 3, 4 )"). We make an exception
|
|
# for nested parens ( (a+b) + c ). Likewise, there should never be
|
|
# a space before a ( when it's a function argument. I assume it's a
|
|
# function argument when the char before the whitespace is legal in
|
|
# a function name (alnum + _) and we're not starting a macro. Also ignore
|
|
# pointers and references to arrays and functions coz they're too tricky:
|
|
# we use a very simple way to recognize these:
|
|
# " (something)(maybe-something)" or
|
|
# " (something)(maybe-something," or
|
|
# " (something)[something]"
|
|
# Note that we assume the contents of [] to be short enough that
|
|
# they'll never need to wrap.
|
|
if ( # Ignore control structures.
|
|
not Search(r'\b(if|for|while|switch|return|new|delete|catch|sizeof)\b',
|
|
fncall) and
|
|
# Ignore pointers/references to functions.
|
|
not Search(r' \([^)]+\)\([^)]*(\)|,$)', fncall) and
|
|
# Ignore pointers/references to arrays.
|
|
not Search(r' \([^)]+\)\[[^\]]+\]', fncall)):
|
|
if Search(r'\w\s*\(\s(?!\s*\\$)', fncall): # a ( used for a fn call
|
|
error(filename, linenum, 'whitespace/parens', 4,
|
|
'Extra space after ( in function call')
|
|
elif Search(r'\(\s+(?!(\s*\\)|\()', fncall):
|
|
error(filename, linenum, 'whitespace/parens', 2,
|
|
'Extra space after (')
|
|
if (Search(r'\w\s+\(', fncall) and
|
|
not Search(r'#\s*define|typedef', fncall) and
|
|
not Search(r'\w\s+\((\w+::)*\*\w+\)\(', fncall)):
|
|
error(filename, linenum, 'whitespace/parens', 4,
|
|
'Extra space before ( in function call')
|
|
# If the ) is followed only by a newline or a { + newline, assume it's
|
|
# part of a control statement (if/while/etc), and don't complain
|
|
if Search(r'[^)]\s+\)\s*[^{\s]', fncall):
|
|
# If the closing parenthesis is preceded by only whitespaces,
|
|
# try to give a more descriptive error message.
|
|
if Search(r'^\s+\)', fncall):
|
|
error(filename, linenum, 'whitespace/parens', 2,
|
|
'Closing ) should be moved to the previous line')
|
|
else:
|
|
error(filename, linenum, 'whitespace/parens', 2,
|
|
'Extra space before )')
|
|
|
|
|
|
def IsBlankLine(line):
|
|
"""Returns true if the given line is blank.
|
|
|
|
We consider a line to be blank if the line is empty or consists of
|
|
only white spaces.
|
|
|
|
Args:
|
|
line: A line of a string.
|
|
|
|
Returns:
|
|
True, if the given line is blank.
|
|
"""
|
|
return not line or line.isspace()
|
|
|
|
|
|
def CheckForFunctionLengths(filename, clean_lines, linenum,
|
|
function_state, error):
|
|
"""Reports for long function bodies.
|
|
|
|
For an overview why this is done, see:
|
|
http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Write_Short_Functions
|
|
|
|
Uses a simplistic algorithm assuming other style guidelines
|
|
(especially spacing) are followed.
|
|
Only checks unindented functions, so class members are unchecked.
|
|
Trivial bodies are unchecked, so constructors with huge initializer lists
|
|
may be missed.
|
|
Blank/comment lines are not counted so as to avoid encouraging the removal
|
|
of vertical space and comments just to get through a lint check.
|
|
NOLINT *on the last line of a function* disables this check.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
function_state: Current function name and lines in body so far.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
lines = clean_lines.lines
|
|
line = lines[linenum]
|
|
raw = clean_lines.raw_lines
|
|
raw_line = raw[linenum]
|
|
joined_line = ''
|
|
|
|
starting_func = False
|
|
regexp = r'(\w(\w|::|\*|\&|\s)*)\(' # decls * & space::name( ...
|
|
match_result = Match(regexp, line)
|
|
if match_result:
|
|
# If the name is all caps and underscores, figure it's a macro and
|
|
# ignore it, unless it's TEST or TEST_F.
|
|
function_name = match_result.group(1).split()[-1]
|
|
if function_name == 'TEST' or function_name == 'TEST_F' or (
|
|
not Match(r'[A-Z_]+$', function_name)):
|
|
starting_func = True
|
|
|
|
if starting_func:
|
|
body_found = False
|
|
for start_linenum in xrange(linenum, clean_lines.NumLines()):
|
|
start_line = lines[start_linenum]
|
|
joined_line += ' ' + start_line.lstrip()
|
|
if Search(r'(;|})', start_line): # Declarations and trivial functions
|
|
body_found = True
|
|
break # ... ignore
|
|
elif Search(r'{', start_line):
|
|
body_found = True
|
|
function = Search(r'((\w|:)*)\(', line).group(1)
|
|
if Match(r'TEST', function): # Handle TEST... macros
|
|
parameter_regexp = Search(r'(\(.*\))', joined_line)
|
|
if parameter_regexp: # Ignore bad syntax
|
|
function += parameter_regexp.group(1)
|
|
else:
|
|
function += '()'
|
|
function_state.Begin(function)
|
|
break
|
|
if not body_found:
|
|
# No body for the function (or evidence of a non-function) was found.
|
|
error(filename, linenum, 'readability/fn_size', 5,
|
|
'Lint failed to find start of function body.')
|
|
elif Match(r'^\}\s*$', line): # function end
|
|
function_state.Check(error, filename, linenum)
|
|
function_state.End()
|
|
elif not Match(r'^\s*$', line):
|
|
function_state.Count() # Count non-blank/non-comment lines.
|
|
|
|
|
|
_RE_PATTERN_TODO = re.compile(r'^//(\s*)TODO(\(.+?\))?:?(\s|$)?')
|
|
|
|
|
|
def CheckComment(comment, filename, linenum, error):
|
|
"""Checks for common mistakes in TODO comments.
|
|
|
|
Args:
|
|
comment: The text of the comment from the line in question.
|
|
filename: The name of the current file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
match = _RE_PATTERN_TODO.match(comment)
|
|
if match:
|
|
# One whitespace is correct; zero whitespace is handled elsewhere.
|
|
leading_whitespace = match.group(1)
|
|
if len(leading_whitespace) > 1:
|
|
error(filename, linenum, 'whitespace/todo', 2,
|
|
'Too many spaces before TODO')
|
|
|
|
username = match.group(2)
|
|
if not username:
|
|
error(filename, linenum, 'readability/todo', 2,
|
|
'Missing username in TODO; it should look like '
|
|
'"// TODO(my_username): Stuff."')
|
|
|
|
middle_whitespace = match.group(3)
|
|
# Comparisons made explicit for correctness -- pylint: disable=g-explicit-bool-comparison
|
|
if middle_whitespace != ' ' and middle_whitespace != '':
|
|
error(filename, linenum, 'whitespace/todo', 2,
|
|
'TODO(my_username) should be followed by a space')
|
|
|
|
def CheckAccess(filename, clean_lines, linenum, nesting_state, error):
|
|
"""Checks for improper use of DISALLOW* macros.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum] # get rid of comments and strings
|
|
|
|
matched = Match((r'\s*(DISALLOW_COPY_AND_ASSIGN|'
|
|
r'DISALLOW_EVIL_CONSTRUCTORS|'
|
|
r'DISALLOW_IMPLICIT_CONSTRUCTORS)'), line)
|
|
if not matched:
|
|
return
|
|
if nesting_state.stack and isinstance(nesting_state.stack[-1], _ClassInfo):
|
|
if nesting_state.stack[-1].access != 'private':
|
|
error(filename, linenum, 'readability/constructors', 3,
|
|
'%s must be in the private: section' % matched.group(1))
|
|
|
|
else:
|
|
# Found DISALLOW* macro outside a class declaration, or perhaps it
|
|
# was used inside a function when it should have been part of the
|
|
# class declaration. We could issue a warning here, but it
|
|
# probably resulted in a compiler error already.
|
|
pass
|
|
|
|
|
|
def FindNextMatchingAngleBracket(clean_lines, linenum, init_suffix):
|
|
"""Find the corresponding > to close a template.
|
|
|
|
Args:
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: Current line number.
|
|
init_suffix: Remainder of the current line after the initial <.
|
|
|
|
Returns:
|
|
True if a matching bracket exists.
|
|
"""
|
|
line = init_suffix
|
|
nesting_stack = ['<']
|
|
while True:
|
|
# Find the next operator that can tell us whether < is used as an
|
|
# opening bracket or as a less-than operator. We only want to
|
|
# warn on the latter case.
|
|
#
|
|
# We could also check all other operators and terminate the search
|
|
# early, e.g. if we got something like this "a<b+c", the "<" is
|
|
# most likely a less-than operator, but then we will get false
|
|
# positives for default arguments and other template expressions.
|
|
match = Search(r'^[^<>(),;\[\]]*([<>(),;\[\]])(.*)$', line)
|
|
if match:
|
|
# Found an operator, update nesting stack
|
|
operator = match.group(1)
|
|
line = match.group(2)
|
|
|
|
if nesting_stack[-1] == '<':
|
|
# Expecting closing angle bracket
|
|
if operator in ('<', '(', '['):
|
|
nesting_stack.append(operator)
|
|
elif operator == '>':
|
|
nesting_stack.pop()
|
|
if not nesting_stack:
|
|
# Found matching angle bracket
|
|
return True
|
|
elif operator == ',':
|
|
# Got a comma after a bracket, this is most likely a template
|
|
# argument. We have not seen a closing angle bracket yet, but
|
|
# it's probably a few lines later if we look for it, so just
|
|
# return early here.
|
|
return True
|
|
else:
|
|
# Got some other operator.
|
|
return False
|
|
|
|
else:
|
|
# Expecting closing parenthesis or closing bracket
|
|
if operator in ('<', '(', '['):
|
|
nesting_stack.append(operator)
|
|
elif operator in (')', ']'):
|
|
# We don't bother checking for matching () or []. If we got
|
|
# something like (] or [), it would have been a syntax error.
|
|
nesting_stack.pop()
|
|
|
|
else:
|
|
# Scan the next line
|
|
linenum += 1
|
|
if linenum >= len(clean_lines.elided):
|
|
break
|
|
line = clean_lines.elided[linenum]
|
|
|
|
# Exhausted all remaining lines and still no matching angle bracket.
|
|
# Most likely the input was incomplete, otherwise we should have
|
|
# seen a semicolon and returned early.
|
|
return True
|
|
|
|
|
|
def FindPreviousMatchingAngleBracket(clean_lines, linenum, init_prefix):
|
|
"""Find the corresponding < that started a template.
|
|
|
|
Args:
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: Current line number.
|
|
init_prefix: Part of the current line before the initial >.
|
|
|
|
Returns:
|
|
True if a matching bracket exists.
|
|
"""
|
|
line = init_prefix
|
|
nesting_stack = ['>']
|
|
while True:
|
|
# Find the previous operator
|
|
match = Search(r'^(.*)([<>(),;\[\]])[^<>(),;\[\]]*$', line)
|
|
if match:
|
|
# Found an operator, update nesting stack
|
|
operator = match.group(2)
|
|
line = match.group(1)
|
|
|
|
if nesting_stack[-1] == '>':
|
|
# Expecting opening angle bracket
|
|
if operator in ('>', ')', ']'):
|
|
nesting_stack.append(operator)
|
|
elif operator == '<':
|
|
nesting_stack.pop()
|
|
if not nesting_stack:
|
|
# Found matching angle bracket
|
|
return True
|
|
elif operator == ',':
|
|
# Got a comma before a bracket, this is most likely a
|
|
# template argument. The opening angle bracket is probably
|
|
# there if we look for it, so just return early here.
|
|
return True
|
|
else:
|
|
# Got some other operator.
|
|
return False
|
|
|
|
else:
|
|
# Expecting opening parenthesis or opening bracket
|
|
if operator in ('>', ')', ']'):
|
|
nesting_stack.append(operator)
|
|
elif operator in ('(', '['):
|
|
nesting_stack.pop()
|
|
|
|
else:
|
|
# Scan the previous line
|
|
linenum -= 1
|
|
if linenum < 0:
|
|
break
|
|
line = clean_lines.elided[linenum]
|
|
|
|
# Exhausted all earlier lines and still no matching angle bracket.
|
|
return False
|
|
|
|
|
|
def CheckSpacing(filename, clean_lines, linenum, nesting_state, error):
|
|
"""Checks for the correctness of various spacing issues in the code.
|
|
|
|
Things we check for: spaces around operators, spaces after
|
|
if/for/while/switch, no spaces around parens in function calls, two
|
|
spaces between code and comment, don't start a block with a blank
|
|
line, don't end a function with a blank line, don't add a blank line
|
|
after public/protected/private, don't have too many blank lines in a row.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
# Don't use "elided" lines here, otherwise we can't check commented lines.
|
|
# Don't want to use "raw" either, because we don't want to check inside C++11
|
|
# raw strings,
|
|
raw = clean_lines.lines_without_raw_strings
|
|
line = raw[linenum]
|
|
|
|
# Before nixing comments, check if the line is blank for no good
|
|
# reason. This includes the first line after a block is opened, and
|
|
# blank lines at the end of a function (ie, right before a line like '}'
|
|
#
|
|
# Skip all the blank line checks if we are immediately inside a
|
|
# namespace body. In other words, don't issue blank line warnings
|
|
# for this block:
|
|
# namespace {
|
|
#
|
|
# }
|
|
#
|
|
# A warning about missing end of namespace comments will be issued instead.
|
|
if IsBlankLine(line) and not nesting_state.InNamespaceBody():
|
|
elided = clean_lines.elided
|
|
prev_line = elided[linenum - 1]
|
|
prevbrace = prev_line.rfind('{')
|
|
# TODO(unknown): Don't complain if line before blank line, and line after,
|
|
# both start with alnums and are indented the same amount.
|
|
# This ignores whitespace at the start of a namespace block
|
|
# because those are not usually indented.
|
|
if prevbrace != -1 and prev_line[prevbrace:].find('}') == -1:
|
|
# OK, we have a blank line at the start of a code block. Before we
|
|
# complain, we check if it is an exception to the rule: The previous
|
|
# non-empty line has the parameters of a function header that are indented
|
|
# 4 spaces (because they did not fit in a 80 column line when placed on
|
|
# the same line as the function name). We also check for the case where
|
|
# the previous line is indented 6 spaces, which may happen when the
|
|
# initializers of a constructor do not fit into a 80 column line.
|
|
exception = False
|
|
if Match(r' {6}\w', prev_line): # Initializer list?
|
|
# We are looking for the opening column of initializer list, which
|
|
# should be indented 4 spaces to cause 6 space indentation afterwards.
|
|
search_position = linenum-2
|
|
while (search_position >= 0
|
|
and Match(r' {6}\w', elided[search_position])):
|
|
search_position -= 1
|
|
exception = (search_position >= 0
|
|
and elided[search_position][:5] == ' :')
|
|
else:
|
|
# Search for the function arguments or an initializer list. We use a
|
|
# simple heuristic here: If the line is indented 4 spaces; and we have a
|
|
# closing paren, without the opening paren, followed by an opening brace
|
|
# or colon (for initializer lists) we assume that it is the last line of
|
|
# a function header. If we have a colon indented 4 spaces, it is an
|
|
# initializer list.
|
|
exception = (Match(r' {4}\w[^\(]*\)\s*(const\s*)?(\{\s*$|:)',
|
|
prev_line)
|
|
or Match(r' {4}:', prev_line))
|
|
|
|
if not exception:
|
|
error(filename, linenum, 'whitespace/blank_line', 2,
|
|
'Redundant blank line at the start of a code block '
|
|
'should be deleted.')
|
|
# Ignore blank lines at the end of a block in a long if-else
|
|
# chain, like this:
|
|
# if (condition1) {
|
|
# // Something followed by a blank line
|
|
#
|
|
# } else if (condition2) {
|
|
# // Something else
|
|
# }
|
|
if linenum + 1 < clean_lines.NumLines():
|
|
next_line = raw[linenum + 1]
|
|
if (next_line
|
|
and Match(r'\s*}', next_line)
|
|
and next_line.find('} else ') == -1):
|
|
error(filename, linenum, 'whitespace/blank_line', 3,
|
|
'Redundant blank line at the end of a code block '
|
|
'should be deleted.')
|
|
|
|
matched = Match(r'\s*(public|protected|private):', prev_line)
|
|
if matched:
|
|
error(filename, linenum, 'whitespace/blank_line', 3,
|
|
'Do not leave a blank line after "%s:"' % matched.group(1))
|
|
|
|
# Next, we complain if there's a comment too near the text
|
|
commentpos = line.find('//')
|
|
if commentpos != -1:
|
|
# Check if the // may be in quotes. If so, ignore it
|
|
# Comparisons made explicit for clarity -- pylint: disable=g-explicit-bool-comparison
|
|
if (line.count('"', 0, commentpos) -
|
|
line.count('\\"', 0, commentpos)) % 2 == 0: # not in quotes
|
|
# Allow one space for new scopes, two spaces otherwise:
|
|
if (not Match(r'^\s*{ //', line) and
|
|
((commentpos >= 1 and
|
|
line[commentpos-1] not in string.whitespace) or
|
|
(commentpos >= 2 and
|
|
line[commentpos-2] not in string.whitespace))):
|
|
error(filename, linenum, 'whitespace/comments', 2,
|
|
'At least two spaces is best between code and comments')
|
|
# There should always be a space between the // and the comment
|
|
commentend = commentpos + 2
|
|
if commentend < len(line) and not line[commentend] == ' ':
|
|
# but some lines are exceptions -- e.g. if they're big
|
|
# comment delimiters like:
|
|
# //----------------------------------------------------------
|
|
# or are an empty C++ style Doxygen comment, like:
|
|
# ///
|
|
# or C++ style Doxygen comments placed after the variable:
|
|
# ///< Header comment
|
|
# //!< Header comment
|
|
# or they begin with multiple slashes followed by a space:
|
|
# //////// Header comment
|
|
match = (Search(r'[=/-]{4,}\s*$', line[commentend:]) or
|
|
Search(r'^/$', line[commentend:]) or
|
|
Search(r'^!< ', line[commentend:]) or
|
|
Search(r'^/< ', line[commentend:]) or
|
|
Search(r'^/+ ', line[commentend:]))
|
|
if not match:
|
|
error(filename, linenum, 'whitespace/comments', 4,
|
|
'Should have a space between // and comment')
|
|
CheckComment(line[commentpos:], filename, linenum, error)
|
|
|
|
line = clean_lines.elided[linenum] # get rid of comments and strings
|
|
|
|
# Don't try to do spacing checks for operator methods
|
|
line = re.sub(r'operator(==|!=|<|<<|<=|>=|>>|>)\(', 'operator\(', line)
|
|
|
|
# We allow no-spaces around = within an if: "if ( (a=Foo()) == 0 )".
|
|
# Otherwise not. Note we only check for non-spaces on *both* sides;
|
|
# sometimes people put non-spaces on one side when aligning ='s among
|
|
# many lines (not that this is behavior that I approve of...)
|
|
if Search(r'[\w.]=[\w.]', line) and not Search(r'\b(if|while) ', line):
|
|
error(filename, linenum, 'whitespace/operators', 4,
|
|
'Missing spaces around =')
|
|
|
|
# It's ok not to have spaces around binary operators like + - * /, but if
|
|
# there's too little whitespace, we get concerned. It's hard to tell,
|
|
# though, so we punt on this one for now. TODO.
|
|
|
|
# You should always have whitespace around binary operators.
|
|
#
|
|
# Check <= and >= first to avoid false positives with < and >, then
|
|
# check non-include lines for spacing around < and >.
|
|
match = Search(r'[^<>=!\s](==|!=|<=|>=)[^<>=!\s]', line)
|
|
if match:
|
|
error(filename, linenum, 'whitespace/operators', 3,
|
|
'Missing spaces around %s' % match.group(1))
|
|
# We allow no-spaces around << when used like this: 10<<20, but
|
|
# not otherwise (particularly, not when used as streams)
|
|
# Also ignore using ns::operator<<;
|
|
match = Search(r'(operator|\S)(?:L|UL|ULL|l|ul|ull)?<<(\S)', line)
|
|
if (match and
|
|
not (match.group(1).isdigit() and match.group(2).isdigit()) and
|
|
not (match.group(1) == 'operator' and match.group(2) == ';')):
|
|
error(filename, linenum, 'whitespace/operators', 3,
|
|
'Missing spaces around <<')
|
|
elif not Match(r'#.*include', line):
|
|
# Avoid false positives on ->
|
|
reduced_line = line.replace('->', '')
|
|
|
|
# Look for < that is not surrounded by spaces. This is only
|
|
# triggered if both sides are missing spaces, even though
|
|
# technically should should flag if at least one side is missing a
|
|
# space. This is done to avoid some false positives with shifts.
|
|
match = Search(r'[^\s<]<([^\s=<].*)', reduced_line)
|
|
if (match and
|
|
not FindNextMatchingAngleBracket(clean_lines, linenum, match.group(1))):
|
|
error(filename, linenum, 'whitespace/operators', 3,
|
|
'Missing spaces around <')
|
|
|
|
# Look for > that is not surrounded by spaces. Similar to the
|
|
# above, we only trigger if both sides are missing spaces to avoid
|
|
# false positives with shifts.
|
|
match = Search(r'^(.*[^\s>])>[^\s=>]', reduced_line)
|
|
if (match and
|
|
not FindPreviousMatchingAngleBracket(clean_lines, linenum,
|
|
match.group(1))):
|
|
error(filename, linenum, 'whitespace/operators', 3,
|
|
'Missing spaces around >')
|
|
|
|
# We allow no-spaces around >> for almost anything. This is because
|
|
# C++11 allows ">>" to close nested templates, which accounts for
|
|
# most cases when ">>" is not followed by a space.
|
|
#
|
|
# We still warn on ">>" followed by alpha character, because that is
|
|
# likely due to ">>" being used for right shifts, e.g.:
|
|
# value >> alpha
|
|
#
|
|
# When ">>" is used to close templates, the alphanumeric letter that
|
|
# follows would be part of an identifier, and there should still be
|
|
# a space separating the template type and the identifier.
|
|
# type<type<type>> alpha
|
|
match = Search(r'>>[a-zA-Z_]', line)
|
|
if match:
|
|
error(filename, linenum, 'whitespace/operators', 3,
|
|
'Missing spaces around >>')
|
|
|
|
# There shouldn't be space around unary operators
|
|
match = Search(r'(!\s|~\s|[\s]--[\s;]|[\s]\+\+[\s;])', line)
|
|
if match:
|
|
error(filename, linenum, 'whitespace/operators', 4,
|
|
'Extra space for operator %s' % match.group(1))
|
|
|
|
# A pet peeve of mine: no spaces after an if, while, switch, or for
|
|
match = Search(r' (if\(|for\(|while\(|switch\()', line)
|
|
if match:
|
|
error(filename, linenum, 'whitespace/parens', 5,
|
|
'Missing space before ( in %s' % match.group(1))
|
|
|
|
# For if/for/while/switch, the left and right parens should be
|
|
# consistent about how many spaces are inside the parens, and
|
|
# there should either be zero or one spaces inside the parens.
|
|
# We don't want: "if ( foo)" or "if ( foo )".
|
|
# Exception: "for ( ; foo; bar)" and "for (foo; bar; )" are allowed.
|
|
match = Search(r'\b(if|for|while|switch)\s*'
|
|
r'\(([ ]*)(.).*[^ ]+([ ]*)\)\s*{\s*$',
|
|
line)
|
|
if match:
|
|
if len(match.group(2)) != len(match.group(4)):
|
|
if not (match.group(3) == ';' and
|
|
len(match.group(2)) == 1 + len(match.group(4)) or
|
|
not match.group(2) and Search(r'\bfor\s*\(.*; \)', line)):
|
|
error(filename, linenum, 'whitespace/parens', 5,
|
|
'Mismatching spaces inside () in %s' % match.group(1))
|
|
if len(match.group(2)) not in [0, 1]:
|
|
error(filename, linenum, 'whitespace/parens', 5,
|
|
'Should have zero or one spaces inside ( and ) in %s' %
|
|
match.group(1))
|
|
|
|
# You should always have a space after a comma (either as fn arg or operator)
|
|
#
|
|
# This does not apply when the non-space character following the
|
|
# comma is another comma, since the only time when that happens is
|
|
# for empty macro arguments.
|
|
#
|
|
# We run this check in two passes: first pass on elided lines to
|
|
# verify that lines contain missing whitespaces, second pass on raw
|
|
# lines to confirm that those missing whitespaces are not due to
|
|
# elided comments.
|
|
if Search(r',[^,\s]', line) and Search(r',[^,\s]', raw[linenum]):
|
|
error(filename, linenum, 'whitespace/comma', 3,
|
|
'Missing space after ,')
|
|
|
|
# You should always have a space after a semicolon
|
|
# except for few corner cases
|
|
# TODO(unknown): clarify if 'if (1) { return 1;}' is requires one more
|
|
# space after ;
|
|
if Search(r';[^\s};\\)/]', line):
|
|
error(filename, linenum, 'whitespace/semicolon', 3,
|
|
'Missing space after ;')
|
|
|
|
# Next we will look for issues with function calls.
|
|
CheckSpacingForFunctionCall(filename, line, linenum, error)
|
|
|
|
# Except after an opening paren, or after another opening brace (in case of
|
|
# an initializer list, for instance), you should have spaces before your
|
|
# braces. And since you should never have braces at the beginning of a line,
|
|
# this is an easy test.
|
|
match = Match(r'^(.*[^ ({]){', line)
|
|
if match:
|
|
# Try a bit harder to check for brace initialization. This
|
|
# happens in one of the following forms:
|
|
# Constructor() : initializer_list_{} { ... }
|
|
# Constructor{}.MemberFunction()
|
|
# Type variable{};
|
|
# FunctionCall(type{}, ...);
|
|
# LastArgument(..., type{});
|
|
# LOG(INFO) << type{} << " ...";
|
|
# map_of_type[{...}] = ...;
|
|
#
|
|
# We check for the character following the closing brace, and
|
|
# silence the warning if it's one of those listed above, i.e.
|
|
# "{.;,)<]".
|
|
#
|
|
# To account for nested initializer list, we allow any number of
|
|
# closing braces up to "{;,)<". We can't simply silence the
|
|
# warning on first sight of closing brace, because that would
|
|
# cause false negatives for things that are not initializer lists.
|
|
# Silence this: But not this:
|
|
# Outer{ if (...) {
|
|
# Inner{...} if (...){ // Missing space before {
|
|
# }; }
|
|
#
|
|
# There is a false negative with this approach if people inserted
|
|
# spurious semicolons, e.g. "if (cond){};", but we will catch the
|
|
# spurious semicolon with a separate check.
|
|
(endline, endlinenum, endpos) = CloseExpression(
|
|
clean_lines, linenum, len(match.group(1)))
|
|
trailing_text = ''
|
|
if endpos > -1:
|
|
trailing_text = endline[endpos:]
|
|
for offset in xrange(endlinenum + 1,
|
|
min(endlinenum + 3, clean_lines.NumLines() - 1)):
|
|
trailing_text += clean_lines.elided[offset]
|
|
if not Match(r'^[\s}]*[{.;,)<\]]', trailing_text):
|
|
error(filename, linenum, 'whitespace/braces', 5,
|
|
'Missing space before {')
|
|
|
|
# Make sure '} else {' has spaces.
|
|
if Search(r'}else', line):
|
|
error(filename, linenum, 'whitespace/braces', 5,
|
|
'Missing space before else')
|
|
|
|
# You shouldn't have spaces before your brackets, except maybe after
|
|
# 'delete []' or 'new char * []'.
|
|
if Search(r'\w\s+\[', line) and not Search(r'delete\s+\[', line):
|
|
error(filename, linenum, 'whitespace/braces', 5,
|
|
'Extra space before [')
|
|
|
|
# You shouldn't have a space before a semicolon at the end of the line.
|
|
# There's a special case for "for" since the style guide allows space before
|
|
# the semicolon there.
|
|
if Search(r':\s*;\s*$', line):
|
|
error(filename, linenum, 'whitespace/semicolon', 5,
|
|
'Semicolon defining empty statement. Use {} instead.')
|
|
elif Search(r'^\s*;\s*$', line):
|
|
error(filename, linenum, 'whitespace/semicolon', 5,
|
|
'Line contains only semicolon. If this should be an empty statement, '
|
|
'use {} instead.')
|
|
elif (Search(r'\s+;\s*$', line) and
|
|
not Search(r'\bfor\b', line)):
|
|
error(filename, linenum, 'whitespace/semicolon', 5,
|
|
'Extra space before last semicolon. If this should be an empty '
|
|
'statement, use {} instead.')
|
|
|
|
# In range-based for, we wanted spaces before and after the colon, but
|
|
# not around "::" tokens that might appear.
|
|
if (Search('for *\(.*[^:]:[^: ]', line) or
|
|
Search('for *\(.*[^: ]:[^:]', line)):
|
|
error(filename, linenum, 'whitespace/forcolon', 2,
|
|
'Missing space around colon in range-based for loop')
|
|
|
|
|
|
def CheckSectionSpacing(filename, clean_lines, class_info, linenum, error):
|
|
"""Checks for additional blank line issues related to sections.
|
|
|
|
Currently the only thing checked here is blank line before protected/private.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
class_info: A _ClassInfo objects.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
# Skip checks if the class is small, where small means 25 lines or less.
|
|
# 25 lines seems like a good cutoff since that's the usual height of
|
|
# terminals, and any class that can't fit in one screen can't really
|
|
# be considered "small".
|
|
#
|
|
# Also skip checks if we are on the first line. This accounts for
|
|
# classes that look like
|
|
# class Foo { public: ... };
|
|
#
|
|
# If we didn't find the end of the class, last_line would be zero,
|
|
# and the check will be skipped by the first condition.
|
|
if (class_info.last_line - class_info.starting_linenum <= 24 or
|
|
linenum <= class_info.starting_linenum):
|
|
return
|
|
|
|
matched = Match(r'\s*(public|protected|private):', clean_lines.lines[linenum])
|
|
if matched:
|
|
# Issue warning if the line before public/protected/private was
|
|
# not a blank line, but don't do this if the previous line contains
|
|
# "class" or "struct". This can happen two ways:
|
|
# - We are at the beginning of the class.
|
|
# - We are forward-declaring an inner class that is semantically
|
|
# private, but needed to be public for implementation reasons.
|
|
# Also ignores cases where the previous line ends with a backslash as can be
|
|
# common when defining classes in C macros.
|
|
prev_line = clean_lines.lines[linenum - 1]
|
|
if (not IsBlankLine(prev_line) and
|
|
not Search(r'\b(class|struct)\b', prev_line) and
|
|
not Search(r'\\$', prev_line)):
|
|
# Try a bit harder to find the beginning of the class. This is to
|
|
# account for multi-line base-specifier lists, e.g.:
|
|
# class Derived
|
|
# : public Base {
|
|
end_class_head = class_info.starting_linenum
|
|
for i in range(class_info.starting_linenum, linenum):
|
|
if Search(r'\{\s*$', clean_lines.lines[i]):
|
|
end_class_head = i
|
|
break
|
|
if end_class_head < linenum - 1:
|
|
error(filename, linenum, 'whitespace/blank_line', 3,
|
|
'"%s:" should be preceded by a blank line' % matched.group(1))
|
|
|
|
|
|
def GetPreviousNonBlankLine(clean_lines, linenum):
|
|
"""Return the most recent non-blank line and its line number.
|
|
|
|
Args:
|
|
clean_lines: A CleansedLines instance containing the file contents.
|
|
linenum: The number of the line to check.
|
|
|
|
Returns:
|
|
A tuple with two elements. The first element is the contents of the last
|
|
non-blank line before the current line, or the empty string if this is the
|
|
first non-blank line. The second is the line number of that line, or -1
|
|
if this is the first non-blank line.
|
|
"""
|
|
|
|
prevlinenum = linenum - 1
|
|
while prevlinenum >= 0:
|
|
prevline = clean_lines.elided[prevlinenum]
|
|
if not IsBlankLine(prevline): # if not a blank line...
|
|
return (prevline, prevlinenum)
|
|
prevlinenum -= 1
|
|
return ('', -1)
|
|
|
|
|
|
def CheckBraces(filename, clean_lines, linenum, error):
|
|
"""Looks for misplaced braces (e.g. at the end of line).
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
line = clean_lines.elided[linenum] # get rid of comments and strings
|
|
|
|
if Match(r'\s*{\s*$', line):
|
|
# We allow an open brace to start a line in the case where someone is using
|
|
# braces in a block to explicitly create a new scope, which is commonly used
|
|
# to control the lifetime of stack-allocated variables. Braces are also
|
|
# used for brace initializers inside function calls. We don't detect this
|
|
# perfectly: we just don't complain if the last non-whitespace character on
|
|
# the previous non-blank line is ',', ';', ':', '(', '{', or '}', or if the
|
|
# previous line starts a preprocessor block.
|
|
prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0]
|
|
if (not Search(r'[,;:}{(]\s*$', prevline) and
|
|
not Match(r'\s*#', prevline)):
|
|
error(filename, linenum, 'whitespace/braces', 4,
|
|
'{ should almost always be at the end of the previous line')
|
|
|
|
# An else clause should be on the same line as the preceding closing brace.
|
|
if Match(r'\s*else\s*', line):
|
|
prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0]
|
|
if Match(r'\s*}\s*$', prevline):
|
|
error(filename, linenum, 'whitespace/newline', 4,
|
|
'An else should appear on the same line as the preceding }')
|
|
|
|
# If braces come on one side of an else, they should be on both.
|
|
# However, we have to worry about "else if" that spans multiple lines!
|
|
if Search(r'}\s*else[^{]*$', line) or Match(r'[^}]*else\s*{', line):
|
|
if Search(r'}\s*else if([^{]*)$', line): # could be multi-line if
|
|
# find the ( after the if
|
|
pos = line.find('else if')
|
|
pos = line.find('(', pos)
|
|
if pos > 0:
|
|
(endline, _, endpos) = CloseExpression(clean_lines, linenum, pos)
|
|
if endline[endpos:].find('{') == -1: # must be brace after if
|
|
error(filename, linenum, 'readability/braces', 5,
|
|
'If an else has a brace on one side, it should have it on both')
|
|
else: # common case: else not followed by a multi-line if
|
|
error(filename, linenum, 'readability/braces', 5,
|
|
'If an else has a brace on one side, it should have it on both')
|
|
|
|
# Likewise, an else should never have the else clause on the same line
|
|
if Search(r'\belse [^\s{]', line) and not Search(r'\belse if\b', line):
|
|
error(filename, linenum, 'whitespace/newline', 4,
|
|
'Else clause should never be on same line as else (use 2 lines)')
|
|
|
|
# In the same way, a do/while should never be on one line
|
|
if Match(r'\s*do [^\s{]', line):
|
|
error(filename, linenum, 'whitespace/newline', 4,
|
|
'do/while clauses should not be on a single line')
|
|
|
|
# Block bodies should not be followed by a semicolon. Due to C++11
|
|
# brace initialization, there are more places where semicolons are
|
|
# required than not, so we use a whitelist approach to check these
|
|
# rather than a blacklist. These are the places where "};" should
|
|
# be replaced by just "}":
|
|
# 1. Some flavor of block following closing parenthesis:
|
|
# for (;;) {};
|
|
# while (...) {};
|
|
# switch (...) {};
|
|
# Function(...) {};
|
|
# if (...) {};
|
|
# if (...) else if (...) {};
|
|
#
|
|
# 2. else block:
|
|
# if (...) else {};
|
|
#
|
|
# 3. const member function:
|
|
# Function(...) const {};
|
|
#
|
|
# 4. Block following some statement:
|
|
# x = 42;
|
|
# {};
|
|
#
|
|
# 5. Block at the beginning of a function:
|
|
# Function(...) {
|
|
# {};
|
|
# }
|
|
#
|
|
# Note that naively checking for the preceding "{" will also match
|
|
# braces inside multi-dimensional arrays, but this is fine since
|
|
# that expression will not contain semicolons.
|
|
#
|
|
# 6. Block following another block:
|
|
# while (true) {}
|
|
# {};
|
|
#
|
|
# 7. End of namespaces:
|
|
# namespace {};
|
|
#
|
|
# These semicolons seems far more common than other kinds of
|
|
# redundant semicolons, possibly due to people converting classes
|
|
# to namespaces. For now we do not warn for this case.
|
|
#
|
|
# Try matching case 1 first.
|
|
match = Match(r'^(.*\)\s*)\{', line)
|
|
if match:
|
|
# Matched closing parenthesis (case 1). Check the token before the
|
|
# matching opening parenthesis, and don't warn if it looks like a
|
|
# macro. This avoids these false positives:
|
|
# - macro that defines a base class
|
|
# - multi-line macro that defines a base class
|
|
# - macro that defines the whole class-head
|
|
#
|
|
# But we still issue warnings for macros that we know are safe to
|
|
# warn, specifically:
|
|
# - TEST, TEST_F, TEST_P, MATCHER, MATCHER_P
|
|
# - TYPED_TEST
|
|
# - INTERFACE_DEF
|
|
# - EXCLUSIVE_LOCKS_REQUIRED, SHARED_LOCKS_REQUIRED, LOCKS_EXCLUDED:
|
|
#
|
|
# We implement a whitelist of safe macros instead of a blacklist of
|
|
# unsafe macros, even though the latter appears less frequently in
|
|
# google code and would have been easier to implement. This is because
|
|
# the downside for getting the whitelist wrong means some extra
|
|
# semicolons, while the downside for getting the blacklist wrong
|
|
# would result in compile errors.
|
|
#
|
|
# In addition to macros, we also don't want to warn on compound
|
|
# literals.
|
|
closing_brace_pos = match.group(1).rfind(')')
|
|
opening_parenthesis = ReverseCloseExpression(
|
|
clean_lines, linenum, closing_brace_pos)
|
|
if opening_parenthesis[2] > -1:
|
|
line_prefix = opening_parenthesis[0][0:opening_parenthesis[2]]
|
|
macro = Search(r'\b([A-Z_]+)\s*$', line_prefix)
|
|
if ((macro and
|
|
macro.group(1) not in (
|
|
'TEST', 'TEST_F', 'MATCHER', 'MATCHER_P', 'TYPED_TEST',
|
|
'EXCLUSIVE_LOCKS_REQUIRED', 'SHARED_LOCKS_REQUIRED',
|
|
'LOCKS_EXCLUDED', 'INTERFACE_DEF')) or
|
|
Search(r'\s+=\s*$', line_prefix)):
|
|
match = None
|
|
|
|
else:
|
|
# Try matching cases 2-3.
|
|
match = Match(r'^(.*(?:else|\)\s*const)\s*)\{', line)
|
|
if not match:
|
|
# Try matching cases 4-6. These are always matched on separate lines.
|
|
#
|
|
# Note that we can't simply concatenate the previous line to the
|
|
# current line and do a single match, otherwise we may output
|
|
# duplicate warnings for the blank line case:
|
|
# if (cond) {
|
|
# // blank line
|
|
# }
|
|
prevline = GetPreviousNonBlankLine(clean_lines, linenum)[0]
|
|
if prevline and Search(r'[;{}]\s*$', prevline):
|
|
match = Match(r'^(\s*)\{', line)
|
|
|
|
# Check matching closing brace
|
|
if match:
|
|
(endline, endlinenum, endpos) = CloseExpression(
|
|
clean_lines, linenum, len(match.group(1)))
|
|
if endpos > -1 and Match(r'^\s*;', endline[endpos:]):
|
|
# Current {} pair is eligible for semicolon check, and we have found
|
|
# the redundant semicolon, output warning here.
|
|
#
|
|
# Note: because we are scanning forward for opening braces, and
|
|
# outputting warnings for the matching closing brace, if there are
|
|
# nested blocks with trailing semicolons, we will get the error
|
|
# messages in reversed order.
|
|
error(filename, endlinenum, 'readability/braces', 4,
|
|
"You don't need a ; after a }")
|
|
|
|
|
|
def CheckEmptyBlockBody(filename, clean_lines, linenum, error):
|
|
"""Look for empty loop/conditional body with only a single semicolon.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
# Search for loop keywords at the beginning of the line. Because only
|
|
# whitespaces are allowed before the keywords, this will also ignore most
|
|
# do-while-loops, since those lines should start with closing brace.
|
|
#
|
|
# We also check "if" blocks here, since an empty conditional block
|
|
# is likely an error.
|
|
line = clean_lines.elided[linenum]
|
|
matched = Match(r'\s*(for|while|if)\s*\(', line)
|
|
if matched:
|
|
# Find the end of the conditional expression
|
|
(end_line, end_linenum, end_pos) = CloseExpression(
|
|
clean_lines, linenum, line.find('('))
|
|
|
|
# Output warning if what follows the condition expression is a semicolon.
|
|
# No warning for all other cases, including whitespace or newline, since we
|
|
# have a separate check for semicolons preceded by whitespace.
|
|
if end_pos >= 0 and Match(r';', end_line[end_pos:]):
|
|
if matched.group(1) == 'if':
|
|
error(filename, end_linenum, 'whitespace/empty_conditional_body', 5,
|
|
'Empty conditional bodies should use {}')
|
|
else:
|
|
error(filename, end_linenum, 'whitespace/empty_loop_body', 5,
|
|
'Empty loop bodies should use {} or continue')
|
|
|
|
|
|
def CheckCheck(filename, clean_lines, linenum, error):
|
|
"""Checks the use of CHECK and EXPECT macros.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
# Decide the set of replacement macros that should be suggested
|
|
lines = clean_lines.elided
|
|
check_macro = None
|
|
start_pos = -1
|
|
for macro in _CHECK_MACROS:
|
|
i = lines[linenum].find(macro)
|
|
if i >= 0:
|
|
check_macro = macro
|
|
|
|
# Find opening parenthesis. Do a regular expression match here
|
|
# to make sure that we are matching the expected CHECK macro, as
|
|
# opposed to some other macro that happens to contain the CHECK
|
|
# substring.
|
|
matched = Match(r'^(.*\b' + check_macro + r'\s*)\(', lines[linenum])
|
|
if not matched:
|
|
continue
|
|
start_pos = len(matched.group(1))
|
|
break
|
|
if not check_macro or start_pos < 0:
|
|
# Don't waste time here if line doesn't contain 'CHECK' or 'EXPECT'
|
|
return
|
|
|
|
# Find end of the boolean expression by matching parentheses
|
|
(last_line, end_line, end_pos) = CloseExpression(
|
|
clean_lines, linenum, start_pos)
|
|
if end_pos < 0:
|
|
return
|
|
if linenum == end_line:
|
|
expression = lines[linenum][start_pos + 1:end_pos - 1]
|
|
else:
|
|
expression = lines[linenum][start_pos + 1:]
|
|
for i in xrange(linenum + 1, end_line):
|
|
expression += lines[i]
|
|
expression += last_line[0:end_pos - 1]
|
|
|
|
# Parse expression so that we can take parentheses into account.
|
|
# This avoids false positives for inputs like "CHECK((a < 4) == b)",
|
|
# which is not replaceable by CHECK_LE.
|
|
lhs = ''
|
|
rhs = ''
|
|
operator = None
|
|
while expression:
|
|
matched = Match(r'^\s*(<<|<<=|>>|>>=|->\*|->|&&|\|\||'
|
|
r'==|!=|>=|>|<=|<|\()(.*)$', expression)
|
|
if matched:
|
|
token = matched.group(1)
|
|
if token == '(':
|
|
# Parenthesized operand
|
|
expression = matched.group(2)
|
|
(end, _) = FindEndOfExpressionInLine(expression, 0, 1, '(', ')')
|
|
if end < 0:
|
|
return # Unmatched parenthesis
|
|
lhs += '(' + expression[0:end]
|
|
expression = expression[end:]
|
|
elif token in ('&&', '||'):
|
|
# Logical and/or operators. This means the expression
|
|
# contains more than one term, for example:
|
|
# CHECK(42 < a && a < b);
|
|
#
|
|
# These are not replaceable with CHECK_LE, so bail out early.
|
|
return
|
|
elif token in ('<<', '<<=', '>>', '>>=', '->*', '->'):
|
|
# Non-relational operator
|
|
lhs += token
|
|
expression = matched.group(2)
|
|
else:
|
|
# Relational operator
|
|
operator = token
|
|
rhs = matched.group(2)
|
|
break
|
|
else:
|
|
# Unparenthesized operand. Instead of appending to lhs one character
|
|
# at a time, we do another regular expression match to consume several
|
|
# characters at once if possible. Trivial benchmark shows that this
|
|
# is more efficient when the operands are longer than a single
|
|
# character, which is generally the case.
|
|
matched = Match(r'^([^-=!<>()&|]+)(.*)$', expression)
|
|
if not matched:
|
|
matched = Match(r'^(\s*\S)(.*)$', expression)
|
|
if not matched:
|
|
break
|
|
lhs += matched.group(1)
|
|
expression = matched.group(2)
|
|
|
|
# Only apply checks if we got all parts of the boolean expression
|
|
if not (lhs and operator and rhs):
|
|
return
|
|
|
|
# Check that rhs do not contain logical operators. We already know
|
|
# that lhs is fine since the loop above parses out && and ||.
|
|
if rhs.find('&&') > -1 or rhs.find('||') > -1:
|
|
return
|
|
|
|
# At least one of the operands must be a constant literal. This is
|
|
# to avoid suggesting replacements for unprintable things like
|
|
# CHECK(variable != iterator)
|
|
#
|
|
# The following pattern matches decimal, hex integers, strings, and
|
|
# characters (in that order).
|
|
lhs = lhs.strip()
|
|
rhs = rhs.strip()
|
|
match_constant = r'^([-+]?(\d+|0[xX][0-9a-fA-F]+)[lLuU]{0,3}|".*"|\'.*\')$'
|
|
if Match(match_constant, lhs) or Match(match_constant, rhs):
|
|
# Note: since we know both lhs and rhs, we can provide a more
|
|
# descriptive error message like:
|
|
# Consider using CHECK_EQ(x, 42) instead of CHECK(x == 42)
|
|
# Instead of:
|
|
# Consider using CHECK_EQ instead of CHECK(a == b)
|
|
#
|
|
# We are still keeping the less descriptive message because if lhs
|
|
# or rhs gets long, the error message might become unreadable.
|
|
error(filename, linenum, 'readability/check', 2,
|
|
'Consider using %s instead of %s(a %s b)' % (
|
|
_CHECK_REPLACEMENT[check_macro][operator],
|
|
check_macro, operator))
|
|
|
|
|
|
def CheckAltTokens(filename, clean_lines, linenum, error):
|
|
"""Check alternative keywords being used in boolean expressions.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
|
|
# Avoid preprocessor lines
|
|
if Match(r'^\s*#', line):
|
|
return
|
|
|
|
# Last ditch effort to avoid multi-line comments. This will not help
|
|
# if the comment started before the current line or ended after the
|
|
# current line, but it catches most of the false positives. At least,
|
|
# it provides a way to workaround this warning for people who use
|
|
# multi-line comments in preprocessor macros.
|
|
#
|
|
# TODO(unknown): remove this once cpplint has better support for
|
|
# multi-line comments.
|
|
if line.find('/*') >= 0 or line.find('*/') >= 0:
|
|
return
|
|
|
|
for match in _ALT_TOKEN_REPLACEMENT_PATTERN.finditer(line):
|
|
error(filename, linenum, 'readability/alt_tokens', 2,
|
|
'Use operator %s instead of %s' % (
|
|
_ALT_TOKEN_REPLACEMENT[match.group(1)], match.group(1)))
|
|
|
|
|
|
def GetLineWidth(line):
|
|
"""Determines the width of the line in column positions.
|
|
|
|
Args:
|
|
line: A string, which may be a Unicode string.
|
|
|
|
Returns:
|
|
The width of the line in column positions, accounting for Unicode
|
|
combining characters and wide characters.
|
|
"""
|
|
if isinstance(line, unicode):
|
|
width = 0
|
|
for uc in unicodedata.normalize('NFC', line):
|
|
if unicodedata.east_asian_width(uc) in ('W', 'F'):
|
|
width += 2
|
|
elif not unicodedata.combining(uc):
|
|
width += 1
|
|
return width
|
|
else:
|
|
return len(line)
|
|
|
|
|
|
def CheckStyle(filename, clean_lines, linenum, file_extension, nesting_state,
|
|
error):
|
|
"""Checks rules from the 'C++ style rules' section of cppguide.html.
|
|
|
|
Most of these rules are hard to test (naming, comment style), but we
|
|
do what we can. In particular we check for 2-space indents, line lengths,
|
|
tab usage, spaces inside code, etc.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
file_extension: The extension (without the dot) of the filename.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
|
|
# Don't use "elided" lines here, otherwise we can't check commented lines.
|
|
# Don't want to use "raw" either, because we don't want to check inside C++11
|
|
# raw strings,
|
|
raw_lines = clean_lines.lines_without_raw_strings
|
|
line = raw_lines[linenum]
|
|
|
|
if line.find('\t') != -1:
|
|
error(filename, linenum, 'whitespace/tab', 1,
|
|
'Tab found; better to use spaces')
|
|
|
|
# One or three blank spaces at the beginning of the line is weird; it's
|
|
# hard to reconcile that with 2-space indents.
|
|
# NOTE: here are the conditions rob pike used for his tests. Mine aren't
|
|
# as sophisticated, but it may be worth becoming so: RLENGTH==initial_spaces
|
|
# if(RLENGTH > 20) complain = 0;
|
|
# if(match($0, " +(error|private|public|protected):")) complain = 0;
|
|
# if(match(prev, "&& *$")) complain = 0;
|
|
# if(match(prev, "\\|\\| *$")) complain = 0;
|
|
# if(match(prev, "[\",=><] *$")) complain = 0;
|
|
# if(match($0, " <<")) complain = 0;
|
|
# if(match(prev, " +for \\(")) complain = 0;
|
|
# if(prevodd && match(prevprev, " +for \\(")) complain = 0;
|
|
initial_spaces = 0
|
|
cleansed_line = clean_lines.elided[linenum]
|
|
while initial_spaces < len(line) and line[initial_spaces] == ' ':
|
|
initial_spaces += 1
|
|
if line and line[-1].isspace():
|
|
error(filename, linenum, 'whitespace/end_of_line', 4,
|
|
'Line ends in whitespace. Consider deleting these extra spaces.')
|
|
# There are certain situations we allow one space, notably for section labels
|
|
elif ((initial_spaces == 1 or initial_spaces == 3) and
|
|
not Match(r'\s*\w+\s*:\s*$', cleansed_line)):
|
|
error(filename, linenum, 'whitespace/indent', 3,
|
|
'Weird number of spaces at line-start. '
|
|
'Are you using a 2-space indent?')
|
|
|
|
# Check if the line is a header guard.
|
|
is_header_guard = False
|
|
if file_extension == 'h':
|
|
cppvar = GetHeaderGuardCPPVariable(filename)
|
|
if (line.startswith('#ifndef %s' % cppvar) or
|
|
line.startswith('#define %s' % cppvar) or
|
|
line.startswith('#endif // %s' % cppvar)):
|
|
is_header_guard = True
|
|
# #include lines and header guards can be long, since there's no clean way to
|
|
# split them.
|
|
#
|
|
# URLs can be long too. It's possible to split these, but it makes them
|
|
# harder to cut&paste.
|
|
#
|
|
# The "$Id:...$" comment may also get very long without it being the
|
|
# developers fault.
|
|
if (not line.startswith('#include') and not is_header_guard and
|
|
not Match(r'^\s*//.*http(s?)://\S*$', line) and
|
|
not Match(r'^// \$Id:.*#[0-9]+ \$$', line)):
|
|
line_width = GetLineWidth(line)
|
|
extended_length = int((_line_length * 1.25))
|
|
if line_width > extended_length:
|
|
error(filename, linenum, 'whitespace/line_length', 4,
|
|
'Lines should very rarely be longer than %i characters' %
|
|
extended_length)
|
|
elif line_width > _line_length:
|
|
error(filename, linenum, 'whitespace/line_length', 2,
|
|
'Lines should be <= %i characters long' % _line_length)
|
|
|
|
if (cleansed_line.count(';') > 1 and
|
|
# for loops are allowed two ;'s (and may run over two lines).
|
|
cleansed_line.find('for') == -1 and
|
|
(GetPreviousNonBlankLine(clean_lines, linenum)[0].find('for') == -1 or
|
|
GetPreviousNonBlankLine(clean_lines, linenum)[0].find(';') != -1) and
|
|
# It's ok to have many commands in a switch case that fits in 1 line
|
|
not ((cleansed_line.find('case ') != -1 or
|
|
cleansed_line.find('default:') != -1) and
|
|
cleansed_line.find('break;') != -1)):
|
|
error(filename, linenum, 'whitespace/newline', 0,
|
|
'More than one command on the same line')
|
|
|
|
# Some more style checks
|
|
CheckBraces(filename, clean_lines, linenum, error)
|
|
CheckEmptyBlockBody(filename, clean_lines, linenum, error)
|
|
CheckAccess(filename, clean_lines, linenum, nesting_state, error)
|
|
CheckSpacing(filename, clean_lines, linenum, nesting_state, error)
|
|
CheckCheck(filename, clean_lines, linenum, error)
|
|
CheckAltTokens(filename, clean_lines, linenum, error)
|
|
classinfo = nesting_state.InnermostClass()
|
|
if classinfo:
|
|
CheckSectionSpacing(filename, clean_lines, classinfo, linenum, error)
|
|
|
|
|
|
_RE_PATTERN_INCLUDE_NEW_STYLE = re.compile(r'#include +"[^/]+\.h"')
|
|
_RE_PATTERN_INCLUDE = re.compile(r'^\s*#\s*include\s*([<"])([^>"]*)[>"].*$')
|
|
# Matches the first component of a filename delimited by -s and _s. That is:
|
|
# _RE_FIRST_COMPONENT.match('foo').group(0) == 'foo'
|
|
# _RE_FIRST_COMPONENT.match('foo.cc').group(0) == 'foo'
|
|
# _RE_FIRST_COMPONENT.match('foo-bar_baz.cc').group(0) == 'foo'
|
|
# _RE_FIRST_COMPONENT.match('foo_bar-baz.cc').group(0) == 'foo'
|
|
_RE_FIRST_COMPONENT = re.compile(r'^[^-_.]+')
|
|
|
|
|
|
def _DropCommonSuffixes(filename):
|
|
"""Drops common suffixes like _test.cc or -inl.h from filename.
|
|
|
|
For example:
|
|
>>> _DropCommonSuffixes('foo/foo-inl.h')
|
|
'foo/foo'
|
|
>>> _DropCommonSuffixes('foo/bar/foo.cc')
|
|
'foo/bar/foo'
|
|
>>> _DropCommonSuffixes('foo/foo_internal.h')
|
|
'foo/foo'
|
|
>>> _DropCommonSuffixes('foo/foo_unusualinternal.h')
|
|
'foo/foo_unusualinternal'
|
|
|
|
Args:
|
|
filename: The input filename.
|
|
|
|
Returns:
|
|
The filename with the common suffix removed.
|
|
"""
|
|
for suffix in ('test.cc', 'regtest.cc', 'unittest.cc',
|
|
'inl.h', 'impl.h', 'internal.h'):
|
|
if (filename.endswith(suffix) and len(filename) > len(suffix) and
|
|
filename[-len(suffix) - 1] in ('-', '_')):
|
|
return filename[:-len(suffix) - 1]
|
|
return os.path.splitext(filename)[0]
|
|
|
|
|
|
def _IsTestFilename(filename):
|
|
"""Determines if the given filename has a suffix that identifies it as a test.
|
|
|
|
Args:
|
|
filename: The input filename.
|
|
|
|
Returns:
|
|
True if 'filename' looks like a test, False otherwise.
|
|
"""
|
|
if (filename.endswith('_test.cc') or
|
|
filename.endswith('_unittest.cc') or
|
|
filename.endswith('_regtest.cc')):
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
|
|
def _ClassifyInclude(fileinfo, include, is_system):
|
|
"""Figures out what kind of header 'include' is.
|
|
|
|
Args:
|
|
fileinfo: The current file cpplint is running over. A FileInfo instance.
|
|
include: The path to a #included file.
|
|
is_system: True if the #include used <> rather than "".
|
|
|
|
Returns:
|
|
One of the _XXX_HEADER constants.
|
|
|
|
For example:
|
|
>>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'stdio.h', True)
|
|
_C_SYS_HEADER
|
|
>>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'string', True)
|
|
_CPP_SYS_HEADER
|
|
>>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'foo/foo.h', False)
|
|
_LIKELY_MY_HEADER
|
|
>>> _ClassifyInclude(FileInfo('foo/foo_unknown_extension.cc'),
|
|
... 'bar/foo_other_ext.h', False)
|
|
_POSSIBLE_MY_HEADER
|
|
>>> _ClassifyInclude(FileInfo('foo/foo.cc'), 'foo/bar.h', False)
|
|
_OTHER_HEADER
|
|
"""
|
|
# This is a list of all standard c++ header files, except
|
|
# those already checked for above.
|
|
is_cpp_h = include in _CPP_HEADERS
|
|
|
|
if is_system:
|
|
if is_cpp_h:
|
|
return _CPP_SYS_HEADER
|
|
else:
|
|
return _C_SYS_HEADER
|
|
|
|
# If the target file and the include we're checking share a
|
|
# basename when we drop common extensions, and the include
|
|
# lives in . , then it's likely to be owned by the target file.
|
|
target_dir, target_base = (
|
|
os.path.split(_DropCommonSuffixes(fileinfo.RepositoryName())))
|
|
include_dir, include_base = os.path.split(_DropCommonSuffixes(include))
|
|
if target_base == include_base and (
|
|
include_dir == target_dir or
|
|
include_dir == os.path.normpath(target_dir + '/../public')):
|
|
return _LIKELY_MY_HEADER
|
|
|
|
# If the target and include share some initial basename
|
|
# component, it's possible the target is implementing the
|
|
# include, so it's allowed to be first, but we'll never
|
|
# complain if it's not there.
|
|
target_first_component = _RE_FIRST_COMPONENT.match(target_base)
|
|
include_first_component = _RE_FIRST_COMPONENT.match(include_base)
|
|
if (target_first_component and include_first_component and
|
|
target_first_component.group(0) ==
|
|
include_first_component.group(0)):
|
|
return _POSSIBLE_MY_HEADER
|
|
|
|
return _OTHER_HEADER
|
|
|
|
|
|
|
|
def CheckIncludeLine(filename, clean_lines, linenum, include_state, error):
|
|
"""Check rules that are applicable to #include lines.
|
|
|
|
Strings on #include lines are NOT removed from elided line, to make
|
|
certain tasks easier. However, to prevent false positives, checks
|
|
applicable to #include lines in CheckLanguage must be put here.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
include_state: An _IncludeState instance in which the headers are inserted.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
fileinfo = FileInfo(filename)
|
|
|
|
line = clean_lines.lines[linenum]
|
|
|
|
# "include" should use the new style "foo/bar.h" instead of just "bar.h"
|
|
if _RE_PATTERN_INCLUDE_NEW_STYLE.search(line):
|
|
error(filename, linenum, 'build/include', 4,
|
|
'Include the directory when naming .h files')
|
|
|
|
# we shouldn't include a file more than once. actually, there are a
|
|
# handful of instances where doing so is okay, but in general it's
|
|
# not.
|
|
match = _RE_PATTERN_INCLUDE.search(line)
|
|
if match:
|
|
include = match.group(2)
|
|
is_system = (match.group(1) == '<')
|
|
if include in include_state:
|
|
error(filename, linenum, 'build/include', 4,
|
|
'"%s" already included at %s:%s' %
|
|
(include, filename, include_state[include]))
|
|
else:
|
|
include_state[include] = linenum
|
|
|
|
# We want to ensure that headers appear in the right order:
|
|
# 1) for foo.cc, foo.h (preferred location)
|
|
# 2) c system files
|
|
# 3) cpp system files
|
|
# 4) for foo.cc, foo.h (deprecated location)
|
|
# 5) other google headers
|
|
#
|
|
# We classify each include statement as one of those 5 types
|
|
# using a number of techniques. The include_state object keeps
|
|
# track of the highest type seen, and complains if we see a
|
|
# lower type after that.
|
|
error_message = include_state.CheckNextIncludeOrder(
|
|
_ClassifyInclude(fileinfo, include, is_system))
|
|
if error_message:
|
|
error(filename, linenum, 'build/include_order', 4,
|
|
'%s. Should be: %s.h, c system, c++ system, other.' %
|
|
(error_message, fileinfo.BaseName()))
|
|
canonical_include = include_state.CanonicalizeAlphabeticalOrder(include)
|
|
if not include_state.IsInAlphabeticalOrder(
|
|
clean_lines, linenum, canonical_include):
|
|
error(filename, linenum, 'build/include_alpha', 4,
|
|
'Include "%s" not in alphabetical order' % include)
|
|
include_state.SetLastHeader(canonical_include)
|
|
|
|
# Look for any of the stream classes that are part of standard C++.
|
|
match = _RE_PATTERN_INCLUDE.match(line)
|
|
if match:
|
|
include = match.group(2)
|
|
if Match(r'(f|ind|io|i|o|parse|pf|stdio|str|)?stream$', include):
|
|
# Many unit tests use cout, so we exempt them.
|
|
if not _IsTestFilename(filename):
|
|
error(filename, linenum, 'readability/streams', 3,
|
|
'Streams are highly discouraged.')
|
|
|
|
|
|
def _GetTextInside(text, start_pattern):
|
|
r"""Retrieves all the text between matching open and close parentheses.
|
|
|
|
Given a string of lines and a regular expression string, retrieve all the text
|
|
following the expression and between opening punctuation symbols like
|
|
(, [, or {, and the matching close-punctuation symbol. This properly nested
|
|
occurrences of the punctuations, so for the text like
|
|
printf(a(), b(c()));
|
|
a call to _GetTextInside(text, r'printf\(') will return 'a(), b(c())'.
|
|
start_pattern must match string having an open punctuation symbol at the end.
|
|
|
|
Args:
|
|
text: The lines to extract text. Its comments and strings must be elided.
|
|
It can be single line and can span multiple lines.
|
|
start_pattern: The regexp string indicating where to start extracting
|
|
the text.
|
|
Returns:
|
|
The extracted text.
|
|
None if either the opening string or ending punctuation could not be found.
|
|
"""
|
|
# TODO(sugawarayu): Audit cpplint.py to see what places could be profitably
|
|
# rewritten to use _GetTextInside (and use inferior regexp matching today).
|
|
|
|
# Give opening punctuations to get the matching close-punctuations.
|
|
matching_punctuation = {'(': ')', '{': '}', '[': ']'}
|
|
closing_punctuation = set(matching_punctuation.itervalues())
|
|
|
|
# Find the position to start extracting text.
|
|
match = re.search(start_pattern, text, re.M)
|
|
if not match: # start_pattern not found in text.
|
|
return None
|
|
start_position = match.end(0)
|
|
|
|
assert start_position > 0, (
|
|
'start_pattern must ends with an opening punctuation.')
|
|
assert text[start_position - 1] in matching_punctuation, (
|
|
'start_pattern must ends with an opening punctuation.')
|
|
# Stack of closing punctuations we expect to have in text after position.
|
|
punctuation_stack = [matching_punctuation[text[start_position - 1]]]
|
|
position = start_position
|
|
while punctuation_stack and position < len(text):
|
|
if text[position] == punctuation_stack[-1]:
|
|
punctuation_stack.pop()
|
|
elif text[position] in closing_punctuation:
|
|
# A closing punctuation without matching opening punctuations.
|
|
return None
|
|
elif text[position] in matching_punctuation:
|
|
punctuation_stack.append(matching_punctuation[text[position]])
|
|
position += 1
|
|
if punctuation_stack:
|
|
# Opening punctuations left without matching close-punctuations.
|
|
return None
|
|
# punctuations match.
|
|
return text[start_position:position - 1]
|
|
|
|
|
|
# Patterns for matching call-by-reference parameters.
|
|
#
|
|
# Supports nested templates up to 2 levels deep using this messy pattern:
|
|
# < (?: < (?: < [^<>]*
|
|
# >
|
|
# | [^<>] )*
|
|
# >
|
|
# | [^<>] )*
|
|
# >
|
|
_RE_PATTERN_IDENT = r'[_a-zA-Z]\w*' # =~ [[:alpha:]][[:alnum:]]*
|
|
_RE_PATTERN_TYPE = (
|
|
r'(?:const\s+)?(?:typename\s+|class\s+|struct\s+|union\s+|enum\s+)?'
|
|
r'(?:\w|'
|
|
r'\s*<(?:<(?:<[^<>]*>|[^<>])*>|[^<>])*>|'
|
|
r'::)+')
|
|
# A call-by-reference parameter ends with '& identifier'.
|
|
_RE_PATTERN_REF_PARAM = re.compile(
|
|
r'(' + _RE_PATTERN_TYPE + r'(?:\s*(?:\bconst\b|[*]))*\s*'
|
|
r'&\s*' + _RE_PATTERN_IDENT + r')\s*(?:=[^,()]+)?[,)]')
|
|
# A call-by-const-reference parameter either ends with 'const& identifier'
|
|
# or looks like 'const type& identifier' when 'type' is atomic.
|
|
_RE_PATTERN_CONST_REF_PARAM = (
|
|
r'(?:.*\s*\bconst\s*&\s*' + _RE_PATTERN_IDENT +
|
|
r'|const\s+' + _RE_PATTERN_TYPE + r'\s*&\s*' + _RE_PATTERN_IDENT + r')')
|
|
|
|
|
|
def CheckLanguage(filename, clean_lines, linenum, file_extension,
|
|
include_state, nesting_state, error):
|
|
"""Checks rules from the 'C++ language rules' section of cppguide.html.
|
|
|
|
Some of these rules are hard to test (function overloading, using
|
|
uint32 inappropriately), but we do the best we can.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
file_extension: The extension (without the dot) of the filename.
|
|
include_state: An _IncludeState instance in which the headers are inserted.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
# If the line is empty or consists of entirely a comment, no need to
|
|
# check it.
|
|
line = clean_lines.elided[linenum]
|
|
if not line:
|
|
return
|
|
|
|
match = _RE_PATTERN_INCLUDE.search(line)
|
|
if match:
|
|
CheckIncludeLine(filename, clean_lines, linenum, include_state, error)
|
|
return
|
|
|
|
# Reset include state across preprocessor directives. This is meant
|
|
# to silence warnings for conditional includes.
|
|
if Match(r'^\s*#\s*(?:ifdef|elif|else|endif)\b', line):
|
|
include_state.ResetSection()
|
|
|
|
# Make Windows paths like Unix.
|
|
fullname = os.path.abspath(filename).replace('\\', '/')
|
|
|
|
# TODO(unknown): figure out if they're using default arguments in fn proto.
|
|
|
|
# Check to see if they're using an conversion function cast.
|
|
# I just try to capture the most common basic types, though there are more.
|
|
# Parameterless conversion functions, such as bool(), are allowed as they are
|
|
# probably a member operator declaration or default constructor.
|
|
match = Search(
|
|
r'(\bnew\s+)?\b' # Grab 'new' operator, if it's there
|
|
r'(int|float|double|bool|char|int32|uint32|int64|uint64)'
|
|
r'(\([^)].*)', line)
|
|
if match:
|
|
matched_new = match.group(1)
|
|
matched_type = match.group(2)
|
|
matched_funcptr = match.group(3)
|
|
|
|
# gMock methods are defined using some variant of MOCK_METHODx(name, type)
|
|
# where type may be float(), int(string), etc. Without context they are
|
|
# virtually indistinguishable from int(x) casts. Likewise, gMock's
|
|
# MockCallback takes a template parameter of the form return_type(arg_type),
|
|
# which looks much like the cast we're trying to detect.
|
|
#
|
|
# std::function<> wrapper has a similar problem.
|
|
#
|
|
# Return types for function pointers also look like casts if they
|
|
# don't have an extra space.
|
|
if (matched_new is None and # If new operator, then this isn't a cast
|
|
not (Match(r'^\s*MOCK_(CONST_)?METHOD\d+(_T)?\(', line) or
|
|
Search(r'\bMockCallback<.*>', line) or
|
|
Search(r'\bstd::function<.*>', line)) and
|
|
not (matched_funcptr and
|
|
Match(r'\((?:[^() ]+::\s*\*\s*)?[^() ]+\)\s*\(',
|
|
matched_funcptr))):
|
|
# Try a bit harder to catch gmock lines: the only place where
|
|
# something looks like an old-style cast is where we declare the
|
|
# return type of the mocked method, and the only time when we
|
|
# are missing context is if MOCK_METHOD was split across
|
|
# multiple lines. The missing MOCK_METHOD is usually one or two
|
|
# lines back, so scan back one or two lines.
|
|
#
|
|
# It's not possible for gmock macros to appear in the first 2
|
|
# lines, since the class head + section name takes up 2 lines.
|
|
if (linenum < 2 or
|
|
not (Match(r'^\s*MOCK_(?:CONST_)?METHOD\d+(?:_T)?\((?:\S+,)?\s*$',
|
|
clean_lines.elided[linenum - 1]) or
|
|
Match(r'^\s*MOCK_(?:CONST_)?METHOD\d+(?:_T)?\(\s*$',
|
|
clean_lines.elided[linenum - 2]))):
|
|
error(filename, linenum, 'readability/casting', 4,
|
|
'Using deprecated casting style. '
|
|
'Use static_cast<%s>(...) instead' %
|
|
matched_type)
|
|
|
|
CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum],
|
|
'static_cast',
|
|
r'\((int|float|double|bool|char|u?int(16|32|64))\)', error)
|
|
|
|
# This doesn't catch all cases. Consider (const char * const)"hello".
|
|
#
|
|
# (char *) "foo" should always be a const_cast (reinterpret_cast won't
|
|
# compile).
|
|
if CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum],
|
|
'const_cast', r'\((char\s?\*+\s?)\)\s*"', error):
|
|
pass
|
|
else:
|
|
# Check pointer casts for other than string constants
|
|
CheckCStyleCast(filename, linenum, line, clean_lines.raw_lines[linenum],
|
|
'reinterpret_cast', r'\((\w+\s?\*+\s?)\)', error)
|
|
|
|
# In addition, we look for people taking the address of a cast. This
|
|
# is dangerous -- casts can assign to temporaries, so the pointer doesn't
|
|
# point where you think.
|
|
match = Search(
|
|
r'(?:&\(([^)]+)\)[\w(])|'
|
|
r'(?:&(static|dynamic|down|reinterpret)_cast\b)', line)
|
|
if match and match.group(1) != '*':
|
|
error(filename, linenum, 'runtime/casting', 4,
|
|
('Are you taking an address of a cast? '
|
|
'This is dangerous: could be a temp var. '
|
|
'Take the address before doing the cast, rather than after'))
|
|
|
|
# Create an extended_line, which is the concatenation of the current and
|
|
# next lines, for more effective checking of code that may span more than one
|
|
# line.
|
|
if linenum + 1 < clean_lines.NumLines():
|
|
extended_line = line + clean_lines.elided[linenum + 1]
|
|
else:
|
|
extended_line = line
|
|
|
|
# Check for people declaring static/global STL strings at the top level.
|
|
# This is dangerous because the C++ language does not guarantee that
|
|
# globals with constructors are initialized before the first access.
|
|
match = Match(
|
|
r'((?:|static +)(?:|const +))string +([a-zA-Z0-9_:]+)\b(.*)',
|
|
line)
|
|
# Make sure it's not a function.
|
|
# Function template specialization looks like: "string foo<Type>(...".
|
|
# Class template definitions look like: "string Foo<Type>::Method(...".
|
|
#
|
|
# Also ignore things that look like operators. These are matched separately
|
|
# because operator names cross non-word boundaries. If we change the pattern
|
|
# above, we would decrease the accuracy of matching identifiers.
|
|
if (match and
|
|
not Search(r'\boperator\W', line) and
|
|
not Match(r'\s*(<.*>)?(::[a-zA-Z0-9_]+)?\s*\(([^"]|$)', match.group(3))):
|
|
error(filename, linenum, 'runtime/string', 4,
|
|
'For a static/global string constant, use a C style string instead: '
|
|
'"%schar %s[]".' %
|
|
(match.group(1), match.group(2)))
|
|
|
|
if Search(r'\b([A-Za-z0-9_]*_)\(\1\)', line):
|
|
error(filename, linenum, 'runtime/init', 4,
|
|
'You seem to be initializing a member variable with itself.')
|
|
|
|
if file_extension == 'h':
|
|
# TODO(unknown): check that 1-arg constructors are explicit.
|
|
# How to tell it's a constructor?
|
|
# (handled in CheckForNonStandardConstructs for now)
|
|
# TODO(unknown): check that classes have DISALLOW_EVIL_CONSTRUCTORS
|
|
# (level 1 error)
|
|
pass
|
|
|
|
# Check if people are using the verboten C basic types. The only exception
|
|
# we regularly allow is "unsigned short port" for port.
|
|
if Search(r'\bshort port\b', line):
|
|
if not Search(r'\bunsigned short port\b', line):
|
|
error(filename, linenum, 'runtime/int', 4,
|
|
'Use "unsigned short" for ports, not "short"')
|
|
else:
|
|
match = Search(r'\b(short|long(?! +double)|long long)\b', line)
|
|
if match:
|
|
error(filename, linenum, 'runtime/int', 4,
|
|
'Use int16/int64/etc, rather than the C type %s' % match.group(1))
|
|
|
|
# When snprintf is used, the second argument shouldn't be a literal.
|
|
match = Search(r'snprintf\s*\(([^,]*),\s*([0-9]*)\s*,', line)
|
|
if match and match.group(2) != '0':
|
|
# If 2nd arg is zero, snprintf is used to calculate size.
|
|
error(filename, linenum, 'runtime/printf', 3,
|
|
'If you can, use sizeof(%s) instead of %s as the 2nd arg '
|
|
'to snprintf.' % (match.group(1), match.group(2)))
|
|
|
|
# Check if some verboten C functions are being used.
|
|
if Search(r'\bsprintf\b', line):
|
|
error(filename, linenum, 'runtime/printf', 5,
|
|
'Never use sprintf. Use snprintf instead.')
|
|
match = Search(r'\b(strcpy|strcat)\b', line)
|
|
if match:
|
|
error(filename, linenum, 'runtime/printf', 4,
|
|
'Almost always, snprintf is better than %s' % match.group(1))
|
|
|
|
# Check if some verboten operator overloading is going on
|
|
# TODO(unknown): catch out-of-line unary operator&:
|
|
# class X {};
|
|
# int operator&(const X& x) { return 42; } // unary operator&
|
|
# The trick is it's hard to tell apart from binary operator&:
|
|
# class Y { int operator&(const Y& x) { return 23; } }; // binary operator&
|
|
if Search(r'\boperator\s*&\s*\(\s*\)', line):
|
|
error(filename, linenum, 'runtime/operator', 4,
|
|
'Unary operator& is dangerous. Do not use it.')
|
|
|
|
# Check for suspicious usage of "if" like
|
|
# } if (a == b) {
|
|
if Search(r'\}\s*if\s*\(', line):
|
|
error(filename, linenum, 'readability/braces', 4,
|
|
'Did you mean "else if"? If not, start a new line for "if".')
|
|
|
|
# Check for potential format string bugs like printf(foo).
|
|
# We constrain the pattern not to pick things like DocidForPrintf(foo).
|
|
# Not perfect but it can catch printf(foo.c_str()) and printf(foo->c_str())
|
|
# TODO(sugawarayu): Catch the following case. Need to change the calling
|
|
# convention of the whole function to process multiple line to handle it.
|
|
# printf(
|
|
# boy_this_is_a_really_long_variable_that_cannot_fit_on_the_prev_line);
|
|
printf_args = _GetTextInside(line, r'(?i)\b(string)?printf\s*\(')
|
|
if printf_args:
|
|
match = Match(r'([\w.\->()]+)$', printf_args)
|
|
if match and match.group(1) != '__VA_ARGS__':
|
|
function_name = re.search(r'\b((?:string)?printf)\s*\(',
|
|
line, re.I).group(1)
|
|
error(filename, linenum, 'runtime/printf', 4,
|
|
'Potential format string bug. Do %s("%%s", %s) instead.'
|
|
% (function_name, match.group(1)))
|
|
|
|
# Check for potential memset bugs like memset(buf, sizeof(buf), 0).
|
|
match = Search(r'memset\s*\(([^,]*),\s*([^,]*),\s*0\s*\)', line)
|
|
if match and not Match(r"^''|-?[0-9]+|0x[0-9A-Fa-f]$", match.group(2)):
|
|
error(filename, linenum, 'runtime/memset', 4,
|
|
'Did you mean "memset(%s, 0, %s)"?'
|
|
% (match.group(1), match.group(2)))
|
|
|
|
if Search(r'\busing namespace\b', line):
|
|
error(filename, linenum, 'build/namespaces', 5,
|
|
'Do not use namespace using-directives. '
|
|
'Use using-declarations instead.')
|
|
|
|
# Detect variable-length arrays.
|
|
match = Match(r'\s*(.+::)?(\w+) [a-z]\w*\[(.+)];', line)
|
|
if (match and match.group(2) != 'return' and match.group(2) != 'delete' and
|
|
match.group(3).find(']') == -1):
|
|
# Split the size using space and arithmetic operators as delimiters.
|
|
# If any of the resulting tokens are not compile time constants then
|
|
# report the error.
|
|
tokens = re.split(r'\s|\+|\-|\*|\/|<<|>>]', match.group(3))
|
|
is_const = True
|
|
skip_next = False
|
|
for tok in tokens:
|
|
if skip_next:
|
|
skip_next = False
|
|
continue
|
|
|
|
if Search(r'sizeof\(.+\)', tok): continue
|
|
if Search(r'arraysize\(\w+\)', tok): continue
|
|
|
|
tok = tok.lstrip('(')
|
|
tok = tok.rstrip(')')
|
|
if not tok: continue
|
|
if Match(r'\d+', tok): continue
|
|
if Match(r'0[xX][0-9a-fA-F]+', tok): continue
|
|
if Match(r'k[A-Z0-9]\w*', tok): continue
|
|
if Match(r'(.+::)?k[A-Z0-9]\w*', tok): continue
|
|
if Match(r'(.+::)?[A-Z][A-Z0-9_]*', tok): continue
|
|
# A catch all for tricky sizeof cases, including 'sizeof expression',
|
|
# 'sizeof(*type)', 'sizeof(const type)', 'sizeof(struct StructName)'
|
|
# requires skipping the next token because we split on ' ' and '*'.
|
|
if tok.startswith('sizeof'):
|
|
skip_next = True
|
|
continue
|
|
is_const = False
|
|
break
|
|
if not is_const:
|
|
error(filename, linenum, 'runtime/arrays', 1,
|
|
'Do not use variable-length arrays. Use an appropriately named '
|
|
"('k' followed by CamelCase) compile-time constant for the size.")
|
|
|
|
# If DISALLOW_EVIL_CONSTRUCTORS, DISALLOW_COPY_AND_ASSIGN, or
|
|
# DISALLOW_IMPLICIT_CONSTRUCTORS is present, then it should be the last thing
|
|
# in the class declaration.
|
|
match = Match(
|
|
(r'\s*'
|
|
r'(DISALLOW_(EVIL_CONSTRUCTORS|COPY_AND_ASSIGN|IMPLICIT_CONSTRUCTORS))'
|
|
r'\(.*\);$'),
|
|
line)
|
|
if match and linenum + 1 < clean_lines.NumLines():
|
|
next_line = clean_lines.elided[linenum + 1]
|
|
# We allow some, but not all, declarations of variables to be present
|
|
# in the statement that defines the class. The [\w\*,\s]* fragment of
|
|
# the regular expression below allows users to declare instances of
|
|
# the class or pointers to instances, but not less common types such
|
|
# as function pointers or arrays. It's a tradeoff between allowing
|
|
# reasonable code and avoiding trying to parse more C++ using regexps.
|
|
if not Search(r'^\s*}[\w\*,\s]*;', next_line):
|
|
error(filename, linenum, 'readability/constructors', 3,
|
|
match.group(1) + ' should be the last thing in the class')
|
|
|
|
# Check for use of unnamed namespaces in header files. Registration
|
|
# macros are typically OK, so we allow use of "namespace {" on lines
|
|
# that end with backslashes.
|
|
if (file_extension == 'h'
|
|
and Search(r'\bnamespace\s*{', line)
|
|
and line[-1] != '\\'):
|
|
error(filename, linenum, 'build/namespaces', 4,
|
|
'Do not use unnamed namespaces in header files. See '
|
|
'http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml#Namespaces'
|
|
' for more information.')
|
|
|
|
def CheckForNonConstReference(filename, clean_lines, linenum,
|
|
nesting_state, error):
|
|
"""Check for non-const references.
|
|
|
|
Separate from CheckLanguage since it scans backwards from current
|
|
line, instead of scanning forward.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
# Do nothing if there is no '&' on current line.
|
|
line = clean_lines.elided[linenum]
|
|
if '&' not in line:
|
|
return
|
|
|
|
# Long type names may be broken across multiple lines, usually in one
|
|
# of these forms:
|
|
# LongType
|
|
# ::LongTypeContinued &identifier
|
|
# LongType::
|
|
# LongTypeContinued &identifier
|
|
# LongType<
|
|
# ...>::LongTypeContinued &identifier
|
|
#
|
|
# If we detected a type split across two lines, join the previous
|
|
# line to current line so that we can match const references
|
|
# accordingly.
|
|
#
|
|
# Note that this only scans back one line, since scanning back
|
|
# arbitrary number of lines would be expensive. If you have a type
|
|
# that spans more than 2 lines, please use a typedef.
|
|
if linenum > 1:
|
|
previous = None
|
|
if Match(r'\s*::(?:[\w<>]|::)+\s*&\s*\S', line):
|
|
# previous_line\n + ::current_line
|
|
previous = Search(r'\b((?:const\s*)?(?:[\w<>]|::)+[\w<>])\s*$',
|
|
clean_lines.elided[linenum - 1])
|
|
elif Match(r'\s*[a-zA-Z_]([\w<>]|::)+\s*&\s*\S', line):
|
|
# previous_line::\n + current_line
|
|
previous = Search(r'\b((?:const\s*)?(?:[\w<>]|::)+::)\s*$',
|
|
clean_lines.elided[linenum - 1])
|
|
if previous:
|
|
line = previous.group(1) + line.lstrip()
|
|
else:
|
|
# Check for templated parameter that is split across multiple lines
|
|
endpos = line.rfind('>')
|
|
if endpos > -1:
|
|
(_, startline, startpos) = ReverseCloseExpression(
|
|
clean_lines, linenum, endpos)
|
|
if startpos > -1 and startline < linenum:
|
|
# Found the matching < on an earlier line, collect all
|
|
# pieces up to current line.
|
|
line = ''
|
|
for i in xrange(startline, linenum + 1):
|
|
line += clean_lines.elided[i].strip()
|
|
|
|
# Check for non-const references in function parameters. A single '&' may
|
|
# found in the following places:
|
|
# inside expression: binary & for bitwise AND
|
|
# inside expression: unary & for taking the address of something
|
|
# inside declarators: reference parameter
|
|
# We will exclude the first two cases by checking that we are not inside a
|
|
# function body, including one that was just introduced by a trailing '{'.
|
|
# TODO(unknwon): Doesn't account for preprocessor directives.
|
|
# TODO(unknown): Doesn't account for 'catch(Exception& e)' [rare].
|
|
check_params = False
|
|
if not nesting_state.stack:
|
|
check_params = True # top level
|
|
elif (isinstance(nesting_state.stack[-1], _ClassInfo) or
|
|
isinstance(nesting_state.stack[-1], _NamespaceInfo)):
|
|
check_params = True # within class or namespace
|
|
elif Match(r'.*{\s*$', line):
|
|
if (len(nesting_state.stack) == 1 or
|
|
isinstance(nesting_state.stack[-2], _ClassInfo) or
|
|
isinstance(nesting_state.stack[-2], _NamespaceInfo)):
|
|
check_params = True # just opened global/class/namespace block
|
|
# We allow non-const references in a few standard places, like functions
|
|
# called "swap()" or iostream operators like "<<" or ">>". Do not check
|
|
# those function parameters.
|
|
#
|
|
# We also accept & in static_assert, which looks like a function but
|
|
# it's actually a declaration expression.
|
|
whitelisted_functions = (r'(?:[sS]wap(?:<\w:+>)?|'
|
|
r'operator\s*[<>][<>]|'
|
|
r'static_assert|COMPILE_ASSERT'
|
|
r')\s*\(')
|
|
if Search(whitelisted_functions, line):
|
|
check_params = False
|
|
elif not Search(r'\S+\([^)]*$', line):
|
|
# Don't see a whitelisted function on this line. Actually we
|
|
# didn't see any function name on this line, so this is likely a
|
|
# multi-line parameter list. Try a bit harder to catch this case.
|
|
for i in xrange(2):
|
|
if (linenum > i and
|
|
Search(whitelisted_functions, clean_lines.elided[linenum - i - 1])):
|
|
check_params = False
|
|
break
|
|
|
|
if check_params:
|
|
decls = ReplaceAll(r'{[^}]*}', ' ', line) # exclude function body
|
|
for parameter in re.findall(_RE_PATTERN_REF_PARAM, decls):
|
|
if not Match(_RE_PATTERN_CONST_REF_PARAM, parameter):
|
|
error(filename, linenum, 'runtime/references', 2,
|
|
'Is this a non-const reference? '
|
|
'If so, make const or use a pointer: ' +
|
|
ReplaceAll(' *<', '<', parameter))
|
|
|
|
|
|
def CheckCStyleCast(filename, linenum, line, raw_line, cast_type, pattern,
|
|
error):
|
|
"""Checks for a C-style cast by looking for the pattern.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
linenum: The number of the line to check.
|
|
line: The line of code to check.
|
|
raw_line: The raw line of code to check, with comments.
|
|
cast_type: The string for the C++ cast to recommend. This is either
|
|
reinterpret_cast, static_cast, or const_cast, depending.
|
|
pattern: The regular expression used to find C-style casts.
|
|
error: The function to call with any errors found.
|
|
|
|
Returns:
|
|
True if an error was emitted.
|
|
False otherwise.
|
|
"""
|
|
match = Search(pattern, line)
|
|
if not match:
|
|
return False
|
|
|
|
# e.g., sizeof(int)
|
|
sizeof_match = Match(r'.*sizeof\s*$', line[0:match.start(1) - 1])
|
|
if sizeof_match:
|
|
error(filename, linenum, 'runtime/sizeof', 1,
|
|
'Using sizeof(type). Use sizeof(varname) instead if possible')
|
|
return True
|
|
|
|
# operator++(int) and operator--(int)
|
|
if (line[0:match.start(1) - 1].endswith(' operator++') or
|
|
line[0:match.start(1) - 1].endswith(' operator--')):
|
|
return False
|
|
|
|
# A single unnamed argument for a function tends to look like old
|
|
# style cast. If we see those, don't issue warnings for deprecated
|
|
# casts, instead issue warnings for unnamed arguments where
|
|
# appropriate.
|
|
#
|
|
# These are things that we want warnings for, since the style guide
|
|
# explicitly require all parameters to be named:
|
|
# Function(int);
|
|
# Function(int) {
|
|
# ConstMember(int) const;
|
|
# ConstMember(int) const {
|
|
# ExceptionMember(int) throw (...);
|
|
# ExceptionMember(int) throw (...) {
|
|
# PureVirtual(int) = 0;
|
|
#
|
|
# These are functions of some sort, where the compiler would be fine
|
|
# if they had named parameters, but people often omit those
|
|
# identifiers to reduce clutter:
|
|
# (FunctionPointer)(int);
|
|
# (FunctionPointer)(int) = value;
|
|
# Function((function_pointer_arg)(int))
|
|
# <TemplateArgument(int)>;
|
|
# <(FunctionPointerTemplateArgument)(int)>;
|
|
remainder = line[match.end(0):]
|
|
if Match(r'^\s*(?:;|const\b|throw\b|=|>|\{|\))', remainder):
|
|
# Looks like an unnamed parameter.
|
|
|
|
# Don't warn on any kind of template arguments.
|
|
if Match(r'^\s*>', remainder):
|
|
return False
|
|
|
|
# Don't warn on assignments to function pointers, but keep warnings for
|
|
# unnamed parameters to pure virtual functions. Note that this pattern
|
|
# will also pass on assignments of "0" to function pointers, but the
|
|
# preferred values for those would be "nullptr" or "NULL".
|
|
matched_zero = Match(r'^\s=\s*(\S+)\s*;', remainder)
|
|
if matched_zero and matched_zero.group(1) != '0':
|
|
return False
|
|
|
|
# Don't warn on function pointer declarations. For this we need
|
|
# to check what came before the "(type)" string.
|
|
if Match(r'.*\)\s*$', line[0:match.start(0)]):
|
|
return False
|
|
|
|
# Don't warn if the parameter is named with block comments, e.g.:
|
|
# Function(int /*unused_param*/);
|
|
if '/*' in raw_line:
|
|
return False
|
|
|
|
# Passed all filters, issue warning here.
|
|
error(filename, linenum, 'readability/function', 3,
|
|
'All parameters should be named in a function')
|
|
return True
|
|
|
|
# At this point, all that should be left is actual casts.
|
|
error(filename, linenum, 'readability/casting', 4,
|
|
'Using C-style cast. Use %s<%s>(...) instead' %
|
|
(cast_type, match.group(1)))
|
|
|
|
return True
|
|
|
|
|
|
_HEADERS_CONTAINING_TEMPLATES = (
|
|
('<deque>', ('deque',)),
|
|
('<functional>', ('unary_function', 'binary_function',
|
|
'plus', 'minus', 'multiplies', 'divides', 'modulus',
|
|
'negate',
|
|
'equal_to', 'not_equal_to', 'greater', 'less',
|
|
'greater_equal', 'less_equal',
|
|
'logical_and', 'logical_or', 'logical_not',
|
|
'unary_negate', 'not1', 'binary_negate', 'not2',
|
|
'bind1st', 'bind2nd',
|
|
'pointer_to_unary_function',
|
|
'pointer_to_binary_function',
|
|
'ptr_fun',
|
|
'mem_fun_t', 'mem_fun', 'mem_fun1_t', 'mem_fun1_ref_t',
|
|
'mem_fun_ref_t',
|
|
'const_mem_fun_t', 'const_mem_fun1_t',
|
|
'const_mem_fun_ref_t', 'const_mem_fun1_ref_t',
|
|
'mem_fun_ref',
|
|
)),
|
|
('<limits>', ('numeric_limits',)),
|
|
('<list>', ('list',)),
|
|
('<map>', ('map', 'multimap',)),
|
|
('<memory>', ('allocator',)),
|
|
('<queue>', ('queue', 'priority_queue',)),
|
|
('<set>', ('set', 'multiset',)),
|
|
('<stack>', ('stack',)),
|
|
('<string>', ('char_traits', 'basic_string',)),
|
|
('<utility>', ('pair',)),
|
|
('<vector>', ('vector',)),
|
|
|
|
# gcc extensions.
|
|
# Note: std::hash is their hash, ::hash is our hash
|
|
('<hash_map>', ('hash_map', 'hash_multimap',)),
|
|
('<hash_set>', ('hash_set', 'hash_multiset',)),
|
|
('<slist>', ('slist',)),
|
|
)
|
|
|
|
_RE_PATTERN_STRING = re.compile(r'\bstring\b')
|
|
|
|
_re_pattern_algorithm_header = []
|
|
for _template in ('copy', 'max', 'min', 'min_element', 'sort', 'swap',
|
|
'transform'):
|
|
# Match max<type>(..., ...), max(..., ...), but not foo->max, foo.max or
|
|
# type::max().
|
|
_re_pattern_algorithm_header.append(
|
|
(re.compile(r'[^>.]\b' + _template + r'(<.*?>)?\([^\)]'),
|
|
_template,
|
|
'<algorithm>'))
|
|
|
|
_re_pattern_templates = []
|
|
for _header, _templates in _HEADERS_CONTAINING_TEMPLATES:
|
|
for _template in _templates:
|
|
_re_pattern_templates.append(
|
|
(re.compile(r'(\<|\b)' + _template + r'\s*\<'),
|
|
_template + '<>',
|
|
_header))
|
|
|
|
|
|
def FilesBelongToSameModule(filename_cc, filename_h):
|
|
"""Check if these two filenames belong to the same module.
|
|
|
|
The concept of a 'module' here is a as follows:
|
|
foo.h, foo-inl.h, foo.cc, foo_test.cc and foo_unittest.cc belong to the
|
|
same 'module' if they are in the same directory.
|
|
some/path/public/xyzzy and some/path/internal/xyzzy are also considered
|
|
to belong to the same module here.
|
|
|
|
If the filename_cc contains a longer path than the filename_h, for example,
|
|
'/absolute/path/to/base/sysinfo.cc', and this file would include
|
|
'base/sysinfo.h', this function also produces the prefix needed to open the
|
|
header. This is used by the caller of this function to more robustly open the
|
|
header file. We don't have access to the real include paths in this context,
|
|
so we need this guesswork here.
|
|
|
|
Known bugs: tools/base/bar.cc and base/bar.h belong to the same module
|
|
according to this implementation. Because of this, this function gives
|
|
some false positives. This should be sufficiently rare in practice.
|
|
|
|
Args:
|
|
filename_cc: is the path for the .cc file
|
|
filename_h: is the path for the header path
|
|
|
|
Returns:
|
|
Tuple with a bool and a string:
|
|
bool: True if filename_cc and filename_h belong to the same module.
|
|
string: the additional prefix needed to open the header file.
|
|
"""
|
|
|
|
if not filename_cc.endswith('.cc'):
|
|
return (False, '')
|
|
filename_cc = filename_cc[:-len('.cc')]
|
|
if filename_cc.endswith('_unittest'):
|
|
filename_cc = filename_cc[:-len('_unittest')]
|
|
elif filename_cc.endswith('_test'):
|
|
filename_cc = filename_cc[:-len('_test')]
|
|
filename_cc = filename_cc.replace('/public/', '/')
|
|
filename_cc = filename_cc.replace('/internal/', '/')
|
|
|
|
if not filename_h.endswith('.h'):
|
|
return (False, '')
|
|
filename_h = filename_h[:-len('.h')]
|
|
if filename_h.endswith('-inl'):
|
|
filename_h = filename_h[:-len('-inl')]
|
|
filename_h = filename_h.replace('/public/', '/')
|
|
filename_h = filename_h.replace('/internal/', '/')
|
|
|
|
files_belong_to_same_module = filename_cc.endswith(filename_h)
|
|
common_path = ''
|
|
if files_belong_to_same_module:
|
|
common_path = filename_cc[:-len(filename_h)]
|
|
return files_belong_to_same_module, common_path
|
|
|
|
|
|
def UpdateIncludeState(filename, include_state, io=codecs):
|
|
"""Fill up the include_state with new includes found from the file.
|
|
|
|
Args:
|
|
filename: the name of the header to read.
|
|
include_state: an _IncludeState instance in which the headers are inserted.
|
|
io: The io factory to use to read the file. Provided for testability.
|
|
|
|
Returns:
|
|
True if a header was succesfully added. False otherwise.
|
|
"""
|
|
headerfile = None
|
|
try:
|
|
headerfile = io.open(filename, 'r', 'utf8', 'replace')
|
|
except IOError:
|
|
return False
|
|
linenum = 0
|
|
for line in headerfile:
|
|
linenum += 1
|
|
clean_line = CleanseComments(line)
|
|
match = _RE_PATTERN_INCLUDE.search(clean_line)
|
|
if match:
|
|
include = match.group(2)
|
|
# The value formatting is cute, but not really used right now.
|
|
# What matters here is that the key is in include_state.
|
|
include_state.setdefault(include, '%s:%d' % (filename, linenum))
|
|
return True
|
|
|
|
|
|
def CheckForIncludeWhatYouUse(filename, clean_lines, include_state, error,
|
|
io=codecs):
|
|
"""Reports for missing stl includes.
|
|
|
|
This function will output warnings to make sure you are including the headers
|
|
necessary for the stl containers and functions that you use. We only give one
|
|
reason to include a header. For example, if you use both equal_to<> and
|
|
less<> in a .h file, only one (the latter in the file) of these will be
|
|
reported as a reason to include the <functional>.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
include_state: An _IncludeState instance.
|
|
error: The function to call with any errors found.
|
|
io: The IO factory to use to read the header file. Provided for unittest
|
|
injection.
|
|
"""
|
|
required = {} # A map of header name to linenumber and the template entity.
|
|
# Example of required: { '<functional>': (1219, 'less<>') }
|
|
|
|
for linenum in xrange(clean_lines.NumLines()):
|
|
line = clean_lines.elided[linenum]
|
|
if not line or line[0] == '#':
|
|
continue
|
|
|
|
# String is special -- it is a non-templatized type in STL.
|
|
matched = _RE_PATTERN_STRING.search(line)
|
|
if matched:
|
|
# Don't warn about strings in non-STL namespaces:
|
|
# (We check only the first match per line; good enough.)
|
|
prefix = line[:matched.start()]
|
|
if prefix.endswith('std::') or not prefix.endswith('::'):
|
|
required['<string>'] = (linenum, 'string')
|
|
|
|
for pattern, template, header in _re_pattern_algorithm_header:
|
|
if pattern.search(line):
|
|
required[header] = (linenum, template)
|
|
|
|
# The following function is just a speed up, no semantics are changed.
|
|
if not '<' in line: # Reduces the cpu time usage by skipping lines.
|
|
continue
|
|
|
|
for pattern, template, header in _re_pattern_templates:
|
|
if pattern.search(line):
|
|
required[header] = (linenum, template)
|
|
|
|
# The policy is that if you #include something in foo.h you don't need to
|
|
# include it again in foo.cc. Here, we will look at possible includes.
|
|
# Let's copy the include_state so it is only messed up within this function.
|
|
include_state = include_state.copy()
|
|
|
|
# Did we find the header for this file (if any) and succesfully load it?
|
|
header_found = False
|
|
|
|
# Use the absolute path so that matching works properly.
|
|
abs_filename = FileInfo(filename).FullName()
|
|
|
|
# For Emacs's flymake.
|
|
# If cpplint is invoked from Emacs's flymake, a temporary file is generated
|
|
# by flymake and that file name might end with '_flymake.cc'. In that case,
|
|
# restore original file name here so that the corresponding header file can be
|
|
# found.
|
|
# e.g. If the file name is 'foo_flymake.cc', we should search for 'foo.h'
|
|
# instead of 'foo_flymake.h'
|
|
abs_filename = re.sub(r'_flymake\.cc$', '.cc', abs_filename)
|
|
|
|
# include_state is modified during iteration, so we iterate over a copy of
|
|
# the keys.
|
|
header_keys = include_state.keys()
|
|
for header in header_keys:
|
|
(same_module, common_path) = FilesBelongToSameModule(abs_filename, header)
|
|
fullpath = common_path + header
|
|
if same_module and UpdateIncludeState(fullpath, include_state, io):
|
|
header_found = True
|
|
|
|
# If we can't find the header file for a .cc, assume it's because we don't
|
|
# know where to look. In that case we'll give up as we're not sure they
|
|
# didn't include it in the .h file.
|
|
# TODO(unknown): Do a better job of finding .h files so we are confident that
|
|
# not having the .h file means there isn't one.
|
|
if filename.endswith('.cc') and not header_found:
|
|
return
|
|
|
|
# All the lines have been processed, report the errors found.
|
|
for required_header_unstripped in required:
|
|
template = required[required_header_unstripped][1]
|
|
if required_header_unstripped.strip('<>"') not in include_state:
|
|
error(filename, required[required_header_unstripped][0],
|
|
'build/include_what_you_use', 4,
|
|
'Add #include ' + required_header_unstripped + ' for ' + template)
|
|
|
|
|
|
_RE_PATTERN_EXPLICIT_MAKEPAIR = re.compile(r'\bmake_pair\s*<')
|
|
|
|
|
|
def CheckMakePairUsesDeduction(filename, clean_lines, linenum, error):
|
|
"""Check that make_pair's template arguments are deduced.
|
|
|
|
G++ 4.6 in C++0x mode fails badly if make_pair's template arguments are
|
|
specified explicitly, and such use isn't intended in any case.
|
|
|
|
Args:
|
|
filename: The name of the current file.
|
|
clean_lines: A CleansedLines instance containing the file.
|
|
linenum: The number of the line to check.
|
|
error: The function to call with any errors found.
|
|
"""
|
|
line = clean_lines.elided[linenum]
|
|
match = _RE_PATTERN_EXPLICIT_MAKEPAIR.search(line)
|
|
if match:
|
|
error(filename, linenum, 'build/explicit_make_pair',
|
|
4, # 4 = high confidence
|
|
'For C++11-compatibility, omit template arguments from make_pair'
|
|
' OR use pair directly OR if appropriate, construct a pair directly')
|
|
|
|
|
|
def ProcessLine(filename, file_extension, clean_lines, line,
|
|
include_state, function_state, nesting_state, error,
|
|
extra_check_functions=[]):
|
|
"""Processes a single line in the file.
|
|
|
|
Args:
|
|
filename: Filename of the file that is being processed.
|
|
file_extension: The extension (dot not included) of the file.
|
|
clean_lines: An array of strings, each representing a line of the file,
|
|
with comments stripped.
|
|
line: Number of line being processed.
|
|
include_state: An _IncludeState instance in which the headers are inserted.
|
|
function_state: A _FunctionState instance which counts function lines, etc.
|
|
nesting_state: A _NestingState instance which maintains information about
|
|
the current stack of nested blocks being parsed.
|
|
error: A callable to which errors are reported, which takes 4 arguments:
|
|
filename, line number, error level, and message
|
|
extra_check_functions: An array of additional check functions that will be
|
|
run on each source line. Each function takes 4
|
|
arguments: filename, clean_lines, line, error
|
|
"""
|
|
raw_lines = clean_lines.raw_lines
|
|
ParseNolintSuppressions(filename, raw_lines[line], line, error)
|
|
nesting_state.Update(filename, clean_lines, line, error)
|
|
if nesting_state.stack and nesting_state.stack[-1].inline_asm != _NO_ASM:
|
|
return
|
|
CheckForFunctionLengths(filename, clean_lines, line, function_state, error)
|
|
CheckForMultilineCommentsAndStrings(filename, clean_lines, line, error)
|
|
CheckStyle(filename, clean_lines, line, file_extension, nesting_state, error)
|
|
CheckLanguage(filename, clean_lines, line, file_extension, include_state,
|
|
nesting_state, error)
|
|
CheckForNonConstReference(filename, clean_lines, line, nesting_state, error)
|
|
CheckForNonStandardConstructs(filename, clean_lines, line,
|
|
nesting_state, error)
|
|
CheckVlogArguments(filename, clean_lines, line, error)
|
|
CheckPosixThreading(filename, clean_lines, line, error)
|
|
CheckInvalidIncrement(filename, clean_lines, line, error)
|
|
CheckMakePairUsesDeduction(filename, clean_lines, line, error)
|
|
for check_fn in extra_check_functions:
|
|
check_fn(filename, clean_lines, line, error)
|
|
|
|
def ProcessFileData(filename, file_extension, lines, error,
|
|
extra_check_functions=[]):
|
|
"""Performs lint checks and reports any errors to the given error function.
|
|
|
|
Args:
|
|
filename: Filename of the file that is being processed.
|
|
file_extension: The extension (dot not included) of the file.
|
|
lines: An array of strings, each representing a line of the file, with the
|
|
last element being empty if the file is terminated with a newline.
|
|
error: A callable to which errors are reported, which takes 4 arguments:
|
|
filename, line number, error level, and message
|
|
extra_check_functions: An array of additional check functions that will be
|
|
run on each source line. Each function takes 4
|
|
arguments: filename, clean_lines, line, error
|
|
"""
|
|
lines = (['// marker so line numbers and indices both start at 1'] + lines +
|
|
['// marker so line numbers end in a known way'])
|
|
|
|
include_state = _IncludeState()
|
|
function_state = _FunctionState()
|
|
nesting_state = _NestingState()
|
|
|
|
ResetNolintSuppressions()
|
|
|
|
CheckForCopyright(filename, lines, error)
|
|
|
|
if file_extension == 'h':
|
|
CheckForHeaderGuard(filename, lines, error)
|
|
|
|
RemoveMultiLineComments(filename, lines, error)
|
|
clean_lines = CleansedLines(lines)
|
|
for line in xrange(clean_lines.NumLines()):
|
|
ProcessLine(filename, file_extension, clean_lines, line,
|
|
include_state, function_state, nesting_state, error,
|
|
extra_check_functions)
|
|
nesting_state.CheckCompletedBlocks(filename, error)
|
|
|
|
CheckForIncludeWhatYouUse(filename, clean_lines, include_state, error)
|
|
|
|
# We check here rather than inside ProcessLine so that we see raw
|
|
# lines rather than "cleaned" lines.
|
|
CheckForBadCharacters(filename, lines, error)
|
|
|
|
CheckForNewlineAtEOF(filename, lines, error)
|
|
|
|
def ProcessFile(filename, vlevel, extra_check_functions=[]):
|
|
"""Does google-lint on a single file.
|
|
|
|
Args:
|
|
filename: The name of the file to parse.
|
|
|
|
vlevel: The level of errors to report. Every error of confidence
|
|
>= verbose_level will be reported. 0 is a good default.
|
|
|
|
extra_check_functions: An array of additional check functions that will be
|
|
run on each source line. Each function takes 4
|
|
arguments: filename, clean_lines, line, error
|
|
"""
|
|
|
|
_SetVerboseLevel(vlevel)
|
|
|
|
try:
|
|
# Support the UNIX convention of using "-" for stdin. Note that
|
|
# we are not opening the file with universal newline support
|
|
# (which codecs doesn't support anyway), so the resulting lines do
|
|
# contain trailing '\r' characters if we are reading a file that
|
|
# has CRLF endings.
|
|
# If after the split a trailing '\r' is present, it is removed
|
|
# below. If it is not expected to be present (i.e. os.linesep !=
|
|
# '\r\n' as in Windows), a warning is issued below if this file
|
|
# is processed.
|
|
|
|
if filename == '-':
|
|
lines = codecs.StreamReaderWriter(sys.stdin,
|
|
codecs.getreader('utf8'),
|
|
codecs.getwriter('utf8'),
|
|
'replace').read().split('\n')
|
|
else:
|
|
lines = codecs.open(filename, 'r', 'utf8', 'replace').read().split('\n')
|
|
|
|
carriage_return_found = False
|
|
# Remove trailing '\r'.
|
|
for linenum in range(len(lines)):
|
|
if lines[linenum].endswith('\r'):
|
|
lines[linenum] = lines[linenum].rstrip('\r')
|
|
carriage_return_found = True
|
|
|
|
except IOError:
|
|
sys.stderr.write(
|
|
"Skipping input '%s': Can't open for reading\n" % filename)
|
|
return
|
|
|
|
# Note, if no dot is found, this will give the entire filename as the ext.
|
|
file_extension = filename[filename.rfind('.') + 1:]
|
|
|
|
# When reading from stdin, the extension is unknown, so no cpplint tests
|
|
# should rely on the extension.
|
|
if filename != '-' and file_extension not in _valid_extensions:
|
|
sys.stderr.write('Ignoring %s; not a valid file name '
|
|
'(%s)\n' % (filename, ', '.join(_valid_extensions)))
|
|
else:
|
|
ProcessFileData(filename, file_extension, lines, Error,
|
|
extra_check_functions)
|
|
if carriage_return_found and os.linesep != '\r\n':
|
|
# Use 0 for linenum since outputting only one error for potentially
|
|
# several lines.
|
|
Error(filename, 0, 'whitespace/newline', 1,
|
|
'One or more unexpected \\r (^M) found;'
|
|
'better to use only a \\n')
|
|
|
|
sys.stderr.write('Done processing %s\n' % filename)
|
|
|
|
|
|
def PrintUsage(message):
|
|
"""Prints a brief usage string and exits, optionally with an error message.
|
|
|
|
Args:
|
|
message: The optional error message.
|
|
"""
|
|
sys.stderr.write(_USAGE)
|
|
if message:
|
|
sys.exit('\nFATAL ERROR: ' + message)
|
|
else:
|
|
sys.exit(1)
|
|
|
|
|
|
def PrintCategories():
|
|
"""Prints a list of all the error-categories used by error messages.
|
|
|
|
These are the categories used to filter messages via --filter.
|
|
"""
|
|
sys.stderr.write(''.join(' %s\n' % cat for cat in _ERROR_CATEGORIES))
|
|
sys.exit(0)
|
|
|
|
|
|
def ParseArguments(args):
|
|
"""Parses the command line arguments.
|
|
|
|
This may set the output format and verbosity level as side-effects.
|
|
|
|
Args:
|
|
args: The command line arguments:
|
|
|
|
Returns:
|
|
The list of filenames to lint.
|
|
"""
|
|
try:
|
|
(opts, filenames) = getopt.getopt(args, '', ['help', 'output=', 'verbose=',
|
|
'counting=',
|
|
'filter=',
|
|
'root=',
|
|
'linelength=',
|
|
'extensions='])
|
|
except getopt.GetoptError:
|
|
PrintUsage('Invalid arguments.')
|
|
|
|
verbosity = _VerboseLevel()
|
|
output_format = _OutputFormat()
|
|
filters = ''
|
|
counting_style = ''
|
|
|
|
for (opt, val) in opts:
|
|
if opt == '--help':
|
|
PrintUsage(None)
|
|
elif opt == '--output':
|
|
if val not in ('emacs', 'vs7', 'eclipse'):
|
|
PrintUsage('The only allowed output formats are emacs, vs7 and eclipse.')
|
|
output_format = val
|
|
elif opt == '--verbose':
|
|
verbosity = int(val)
|
|
elif opt == '--filter':
|
|
filters = val
|
|
if not filters:
|
|
PrintCategories()
|
|
elif opt == '--counting':
|
|
if val not in ('total', 'toplevel', 'detailed'):
|
|
PrintUsage('Valid counting options are total, toplevel, and detailed')
|
|
counting_style = val
|
|
elif opt == '--root':
|
|
global _root
|
|
_root = val
|
|
elif opt == '--linelength':
|
|
global _line_length
|
|
try:
|
|
_line_length = int(val)
|
|
except ValueError:
|
|
PrintUsage('Line length must be digits.')
|
|
elif opt == '--extensions':
|
|
global _valid_extensions
|
|
try:
|
|
_valid_extensions = set(val.split(','))
|
|
except ValueError:
|
|
PrintUsage('Extensions must be comma seperated list.')
|
|
|
|
if not filenames:
|
|
PrintUsage('No files were specified.')
|
|
|
|
_SetOutputFormat(output_format)
|
|
_SetVerboseLevel(verbosity)
|
|
_SetFilters(filters)
|
|
_SetCountingStyle(counting_style)
|
|
|
|
return filenames
|
|
|
|
|
|
def main():
|
|
filenames = ParseArguments(sys.argv[1:])
|
|
|
|
# Change stderr to write with replacement characters so we don't die
|
|
# if we try to print something containing non-ASCII characters.
|
|
sys.stderr = codecs.StreamReaderWriter(sys.stderr,
|
|
codecs.getreader('utf8'),
|
|
codecs.getwriter('utf8'),
|
|
'replace')
|
|
|
|
_cpplint_state.ResetErrorCounts()
|
|
for filename in filenames:
|
|
ProcessFile(filename, _cpplint_state.verbose_level)
|
|
_cpplint_state.PrintErrorCounts()
|
|
|
|
sys.exit(_cpplint_state.error_count > 0)
|
|
|
|
|
|
if __name__ == '__main__':
|
|
main()
|