gecko-dev/lib/mac/UserInterface/UGAAppearance.cp

415 строки
16 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifdef PowerPlant_PCH
#include PowerPlant_PCH
#endif
#include <UMemoryMgr.h>
#include <UDrawingState.h>
#include <UDrawingUtils.h>
#include <UGAColorRamp.h>
#include "UGraphicGizmos.h"
#include "UGAAppearance.h"
// GA Bevel tints.
Uint16 UGAAppearance::sGAOneGrayLevel = 0x1111;
Uint16 UGAAppearance::sGATwoGrayLevels = 0x2222;
Uint16 UGAAppearance::sGAThreeGrayLevels = 0x3333;
Uint16 UGAAppearance::sGAFourGrayLevels = 0x4444;
Uint16 UGAAppearance::sGAFiveGrayLevels = 0x5555;
Uint16 UGAAppearance::sGASixGrayLevels = 0x6666;
Uint16 UGAAppearance::sGASevenGrayLevels = 0x7777;
Uint16 UGAAppearance::sGAHiliteContentTint = 0x0500;
const Int16 gsPopup_ArrowButtonWidth = 22; // Width used in drawing the arrow only
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// <09> DrawGAButtonBevelTint
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// This function is based in part on LGAPushButton::DrawButtonNormalColor().
// Given a rect and assuming the content of the rect is filled with 87% gray
// (0xDDDD, 0xDDDD, 0xDDDD), this function will apply tints such that it will
// look like a GA button
void UGAAppearance::DrawGAButtonBevelTint(
const Rect &inRect)
{
StColorPenState thePenSaver;
thePenSaver.Normalize();
Rect frame = inRect;
//::RGBForeColor(&UGAColorRamp::GetBlackColor());
::RGBForeColor(&UGAColorRamp::GetColor(colorRamp_Gray8));
::FrameRoundRect(&frame, 8, 8);
// bevel light side
::InsetRect(&frame, 2, 2);
frame.bottom -= 1;
frame.right -= 1;
SBooleanRect sides = { true, true, false, false };
UGraphicGizmos::BevelTintPartialRect(frame, 1, sGATwoGrayLevels, sGAThreeGrayLevels, sides);
// corner hilites
UGraphicGizmos::BevelTintPixel(inRect.left + 3, inRect.top + 3, sGATwoGrayLevels, true);
UGraphicGizmos::BevelTintPixel(inRect.left + 1, inRect.top + 2, sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(inRect.left + 2, inRect.top + 1, sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(inRect.left + 1, inRect.bottom - 3, sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(inRect.left + 2, inRect.bottom - 2, sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(inRect.right - 3, inRect.top + 1, sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(inRect.right - 2, inRect.top + 2, sGAThreeGrayLevels, false);
// bevel dark side
::OffsetRect(&frame, 1, 1);
sides.left = sides.top = false;
sides.right = sides.bottom = true;
UGraphicGizmos::BevelTintPartialRect(frame, 1, sGATwoGrayLevels, sGAThreeGrayLevels, sides);
UGraphicGizmos::BevelTintLine(frame.left, frame.bottom,
frame.right, frame.bottom,
sGASixGrayLevels, false);
UGraphicGizmos::BevelTintLine(frame.right, frame.bottom - 1,
frame.right, frame.top,
sGASixGrayLevels, false);
// lower right corner pixel dark "hilites"
UGraphicGizmos::BevelTintPixel(inRect.right - 3, inRect.bottom - 3, sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(inRect.right - 4, inRect.bottom - 4, sGAThreeGrayLevels, false);
}
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// <09> DrawGAButtonPressedBevelTint
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// This function is based in part on LGAPushButton::DrawButtonHilitedColor().
// Given a rect and assuming the content of the rect is filled with 40% gray
// (0x6666, 0x6666, 0x6666), this function will apply tints such that it will
// look like a GA button that's pressed down.
void UGAAppearance::DrawGAButtonPressedBevelTint(
const Rect &inRect)
{
StColorPenState thePenSaver;
thePenSaver.Normalize();
Rect frame = inRect;
// Draw frame
//::RGBForeColor(&UGAColorRamp::GetBlackColor());
::RGBForeColor(&UGAColorRamp::GetColor(colorRamp_Gray8));
::FrameRoundRect(&frame, 8, 8);
// <20> LIGHT EDGES
// <20> Start by rendering the bevelled edges of the sides facing the light
// source
// Draw first dark bevel
// Left
UGraphicGizmos::BevelTintLine(frame.left + 1, frame.top + 2,
frame.left + 1, frame.bottom - 2,
sGATwoGrayLevels, false);
// Top
UGraphicGizmos::BevelTintLine(frame.left + 2, frame.top + 1,
frame.right - 2, frame.top + 1,
sGATwoGrayLevels, false);
// second topleft dark bevel
::InsetRect(&frame, 2, 2);
frame.bottom -= 1;
frame.right -= 1;
SBooleanRect sides = { true, true, false, false };
UGraphicGizmos::BevelTintPartialRect(frame, -1, sGAOneGrayLevel, sGAOneGrayLevel, sides);
// corner "hilites"
UGraphicGizmos::BevelTintPixel(inRect.left + 3, inRect.top + 3, sGAOneGrayLevel, false);
UGraphicGizmos::BevelTintPixel(inRect.left + 2, inRect.top + 2, sGAOneGrayLevel, false);
UGraphicGizmos::BevelTintPixel(inRect.left + 2, inRect.bottom - 2, sGAOneGrayLevel, true);
UGraphicGizmos::BevelTintPixel(inRect.right - 2, inRect.top + 2, sGAOneGrayLevel, true);
// <20> SHADOW EDGES
::OffsetRect(&frame, 1, 1);
sides.left = sides.top = false;
sides.right = sides.bottom = true;
UGraphicGizmos::BevelTintPartialRect(frame, -1, sGAOneGrayLevel, sGAOneGrayLevel, sides);
UGraphicGizmos::BevelTintLine(frame.left, frame.bottom,
frame.right, frame.bottom,
sGATwoGrayLevels, true);
UGraphicGizmos::BevelTintLine(frame.right, frame.bottom - 1,
frame.right, frame.top,
sGATwoGrayLevels, true);
// lower right corner pixel dark "hilites"
UGraphicGizmos::BevelTintPixel(inRect.right - 3, inRect.bottom - 3, sGAOneGrayLevel, true);
UGraphicGizmos::BevelTintPixel(inRect.right - 4, inRect.bottom - 4, sGAOneGrayLevel, true);
}
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// <09> DrawGAButtonDimmedBevelTint
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// This function is based in part on LGAPushButton::DrawButtonDimmedColor().
// Given a rect and assuming the content of the rect is filled with 87% gray
// (0xDDDD, 0xDDDD, 0xDDDD), this function will apply tints such that it will
// look like a dimmed GA button
void UGAAppearance::DrawGAButtonDimmedBevelTint(
const Rect &inRect)
{
Rect frame = inRect;
// <20> Draw the frame for the control outside of everything else
// ::RGBForeColor ( &UGAColorRamp::GetColor(colorRamp_Gray7) );
// ::FrameRoundRect ( &frame, 8, 8 );
UGraphicGizmos::BevelTintRoundRect(frame, 8, 8, sGAFiveGrayLevels, false);
}
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// <09> DrawGAPopupBevelTint
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// This function is based in part on LGAPopup::DrawPopupNormalColor().
// Given a rect and assuming the content of the rect is filled with 87% gray
// (0xDDDD, 0xDDDD, 0xDDDD), this function will apply tints such that it will
// look like a GA popup menu
void UGAAppearance::DrawGAPopupBevelTint(
const Rect &inRect)
{
StColorPenState thePenSaver;
thePenSaver.Normalize();
Rect frame = inRect;
// Draw frame
::RGBForeColor(&UGAColorRamp::GetBlackColor());
::FrameRoundRect(&frame, 8, 8);
// <20> LIGHT EDGES
// <20> Start by rendering the bevelled edges of the sides facing the light
// source
// Draw first dark bevel
// Left
UGraphicGizmos::BevelTintLine(frame.left + 1, frame.top + 2,
frame.left + 1, frame.bottom - 2,
sGATwoGrayLevels, true);
// Top
UGraphicGizmos::BevelTintLine(frame.left + 2, frame.top + 1,
frame.right - gsPopup_ArrowButtonWidth - 1, frame.top + 1,
sGATwoGrayLevels, true);
// <20> SHADOW EDGES
// <20> Render the shadow bevels
// Bottom
UGraphicGizmos::BevelTintLine(frame.left + 2, frame.bottom - 2,
frame.right - gsPopup_ArrowButtonWidth, frame.bottom - 2,
sGAThreeGrayLevels, false);
// Right
UGraphicGizmos::BevelTintLine(frame.right - gsPopup_ArrowButtonWidth, frame.top + 2,
frame.right - gsPopup_ArrowButtonWidth, frame.bottom - 3,
sGAThreeGrayLevels, false);
// corner hilite
UGraphicGizmos::BevelTintPixel(frame.right - gsPopup_ArrowButtonWidth, frame.top + 1,
sGAOneGrayLevel, true);
// <20><> EDGES ON ARROW BUTTON
// <20> LIGHT EDGES
// <20> Start by rendering the bevelled edges of the sides facing the light
// source
// Left
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 2), frame.top + 2,
frame.right - (gsPopup_ArrowButtonWidth - 2), frame.bottom - 4,
sGATwoGrayLevels, true);
// Top
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 3), frame.top + 2,
frame.right - 4, frame.top + 2,
sGATwoGrayLevels, true);
// <20> SHADOW EDGES
// <20> Render the shadow bevels
// Light shadow bevel
// Bottom
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 3), frame.bottom - 3,
frame.right - 3, frame.bottom - 3,
sGAThreeGrayLevels, false);
// Right
UGraphicGizmos::BevelTintLine(frame.right - 3, frame.top + 3,
frame.right - 3, frame.bottom - 4,
sGAThreeGrayLevels, false);
// Dark shadow bevel
// Bottom
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 2), frame.bottom - 2,
frame.right - 2, frame.bottom - 2,
sGASixGrayLevels, false);
// Right
UGraphicGizmos::BevelTintLine(frame.right - 2, frame.top + 3,
frame.right - 2, frame.bottom - 2,
sGASixGrayLevels, false);
// corner hilites
UGraphicGizmos::BevelTintPixel(frame.right - 3, frame.top + 1,
sGATwoGrayLevels, false);
UGraphicGizmos::BevelTintPixel(frame.right - (gsPopup_ArrowButtonWidth - 1), frame.bottom - 2,
sGATwoGrayLevels, false);
UGraphicGizmos::BevelTintPixel(frame.right - 2, frame.top + 2,
sGAThreeGrayLevels, false);
UGraphicGizmos::BevelTintPixel(frame.right - 3, frame.bottom - 3,
sGAThreeGrayLevels, false);
}
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// <09> DrawGAPopupPressedBevelTint
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// This function is based in part on LGAPopup::DrawPopupHilitedColor().
// Given a rect and assuming the content of the rect is filled with 40% gray
// (0x6666, 0x6666, 0x6666), this function will apply tints such that it will
// look like a GA popup menu that's pressed down.
void UGAAppearance::DrawGAPopupPressedBevelTint(
const Rect &inRect)
{
StColorPenState thePenSaver;
thePenSaver.Normalize();
Rect frame = inRect;
::RGBForeColor(&UGAColorRamp::GetBlackColor());
::FrameRoundRect(&frame, 8, 8);
// <20> LIGHT EDGES
// <20> Start by rendering the bevelled edges of the sides facing the light
// source
// Left
UGraphicGizmos::BevelTintLine(frame.left + 1, frame.top + 2,
frame.left + 1, frame.bottom - 2,
sGAOneGrayLevel, false);
// Top
UGraphicGizmos::BevelTintLine(frame.left + 2, frame.top + 1,
frame.right - gsPopup_ArrowButtonWidth, frame.top + 1,
sGAOneGrayLevel, false);
// <20> SHADOW EDGES
// <20> Render the shadow bevels
// Bottom
UGraphicGizmos::BevelTintLine(frame.left + 2, frame.bottom - 2,
frame.right - gsPopup_ArrowButtonWidth, frame.bottom - 2,
sGAOneGrayLevel, true);
// Right
UGraphicGizmos::BevelTintLine(frame.right - gsPopup_ArrowButtonWidth, frame.top + 2,
frame.right - gsPopup_ArrowButtonWidth, frame.bottom - 3,
sGAOneGrayLevel, true);
// <20><> EDGES ON ARROW BUTTON
// <20> LIGHT EDGES
// <20> Start by rendering the bevelled edges of the sides facing the light
// source
// Draw first dark bevel
// Left
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 1), frame.top + 1,
frame.right - (gsPopup_ArrowButtonWidth - 1), frame.bottom - 2,
sGATwoGrayLevels, false);
// Top
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 2), frame.top + 1,
frame.right - 3, frame.top + 1,
sGATwoGrayLevels, false);
// Draw second dark bevel
// Left
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 2), frame.top + 2,
frame.right - (gsPopup_ArrowButtonWidth - 2), frame.bottom - 4,
sGAOneGrayLevel, false);
// Top
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 3), frame.top + 2,
frame.right - 4, frame.top + 2,
sGAOneGrayLevel, false);
// <20> SHADOW EDGES
// <20> Render the shadow bevels
// First light bevel
// Right
UGraphicGizmos::BevelTintLine(frame.right - 3, frame.top + 3,
frame.right - 3, frame.bottom - 4,
sGAOneGrayLevel, true);
// Bottom
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 3), frame.bottom - 3,
frame.right - 4, frame.bottom - 3,
sGAOneGrayLevel, true);
// Second light bevel
// Right
UGraphicGizmos::BevelTintLine(frame.right - 2, frame.top + 3,
frame.right - 2, frame.bottom - 3,
sGATwoGrayLevels, true);
// Bottom
UGraphicGizmos::BevelTintLine(frame.right - (gsPopup_ArrowButtonWidth - 2), frame.bottom - 2,
frame.right - 3, frame.bottom - 2,
sGATwoGrayLevels, true);
// corner hilite
UGraphicGizmos::BevelTintPixel(frame.right - 3, frame.bottom - 3,
sGATwoGrayLevels, true);
}
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// <09> DrawGAPopupDimmedBevelTint
// <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
// This function is based in part on LGAPopup::DrawPopupDimmedColor().
// Given a rect and assuming the content of the rect is filled with 87% gray
// (0xDDDD, 0xDDDD, 0xDDDD), this function will apply tints such that it will
// look like a dimmed GA popup menu
void UGAAppearance::DrawGAPopupDimmedBevelTint(
const Rect &inRect)
{
Rect frame = inRect;
// draw round rect frame
UGraphicGizmos::BevelTintRoundRect(frame, 8, 8, sGAFiveGrayLevels, false);
// draw separator between text and arrow
UGraphicGizmos::BevelTintLine(frame.right - gsPopup_ArrowButtonWidth,
frame.top + 1,
frame.right - gsPopup_ArrowButtonWidth,
frame.bottom - 2,
sGAFiveGrayLevels,
false);
}