pjs/config/trace.cpp

/* The contents of this file are subject to the Netscape Public */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: NPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Netscape Public License
 * Version 1.1 (the "License"); you may not use this file except in
 * compliance with the License. You may obtain a copy of the License at
 * http://www.mozilla.org/NPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is 
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *  Garrett Arch Blythe, 03/04/2002  Added interval hit counting.
 *
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the NPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the NPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

/* 
   This is part of a MOZ_COVERAGE build.  (set MOZ_COVERAGE=1 and rebuild)
   When trace.dll is linked in to the build, it counts the number of times 
   each function is called.  When the program exits, it breaks out the 
   functions by module, sorts them by number of calls, then dumps them into 
   win32.order where the module is built.  The order files are used by the
   liker to rearrange the functions in the library.  
*/

#include <windows.h>
#include <imagehlp.h>
#include <stdio.h>

#include "pldhash.h"

//
//  HIT_INTERVAL
//
//  Interval for which we will count hits, in milliseconds.
//  This tends to sample the need for a particular function over time.
//
//  Decreasing the interval makes the code act more like call count
//      ordering.
//  Increasing the interval makes the code act more like no ordering
//      at all.
//  Some middle ground in between is best.  Tweak away....
//
//  We all know that not ordering the link order at all is not an
//      optimal scenario.
//  The folly of call count sorting is that you may group together
//      methods which are rarely used but often called with rountines that
//      are actually needed during the entire run of the application.
//      If you can apply a time filter to smooth out the "page level" or
//      "working set" needs to have a function in memory, then you should
//      get a much better real world ordering.
//
#define HIT_INTERVAL 1000

class Reporter {
public:
    ~Reporter();
};

static Reporter theReporter;
static FILE* logfile;

/* 
   Hash of function names, and call counts]
 */
static PLDHashTable Calls;

struct CallEntry {
    struct PLDHashEntryHdr hdr;
    const void*            addr;
    unsigned               count;
    unsigned               hits; // interval hits.
    DWORD                  tick; // last valid tick, used to count hits.
};

static PLDHashTableOps Ops = {
    PL_DHashAllocTable,
    PL_DHashFreeTable,
    PL_DHashGetKeyStub,
    PL_DHashVoidPtrKeyStub,
    PL_DHashMatchEntryStub,
    PL_DHashMoveEntryStub,
    PL_DHashClearEntryStub,
    PL_DHashFinalizeStub
};

class Node {
public:
    Node() {function = 0; count = 0; hits = 0; next = 0;};
    char* function;
    unsigned   count;
    unsigned   hits;
    Node* next;
};


/* 
   Hash of each module.  Contains a sorted linked list of each function and
   its number of calls for that module.
*/

static PLDHashTable Modules;

struct ModulesEntry {
    struct PLDHashEntryHdr hdr;
    char*                  moduleName;
    Node*                  byCount;
};

static PLDHashTableOps ModOps = {
    PL_DHashAllocTable,
    PL_DHashFreeTable,
    PL_DHashGetKeyStub,
    PL_DHashStringKey,
    PL_DHashMatchStringKey,
    PL_DHashMoveEntryStub,
    PL_DHashClearEntryStub,
    PL_DHashFinalizeStub
};


/*
   Counts the number of times a function is called.
*/
extern "C"
static void
Log(void* addr)
{
static int initialized = 0;

    addr = (void*) ((unsigned) addr - 5);

    if (!initialized) {
        initialized = PL_DHashTableInit(&Calls, &Ops, 0, sizeof(CallEntry), 16);
        if (!initialized) 
            return;
    }

    entry = (CallEntry*) PL_DHashTableOperate(&Calls, addr, PL_DHASH_ADD);
    if (!entry)
        return; // OOM

    if (!entry->addr)
        entry->addr = addr;

    //
    //  Another call recorded.
    //
    ++entry->count;

    //
    // Only record a hit if the appropriate amount of time has passed.
    //
    DWORD curtick = GetTickCount();
    if(curtick >= (entry->tick + HIT_INTERVAL))
    {
        //
        //  Record the interval hit.
        //  Update the tick.
        //
        entry->hits++;
        entry->tick = curtick;
    }
}

/*
   assembly to call Log, and count this function
*/

extern "C"
__declspec(naked dllexport)
void _penter()
{
    __asm {
        push ecx               // save ecx for caller
        push dword ptr [esp+4] // the caller's address is the only param
        call Log               // ...to Log()
        add  esp,4
        pop  ecx               // restore ecx for caller
        ret
    }
}

/*
   Steps through the hash of modules and dumps the function counts out to 
   win32.order
*/

static PLDHashOperator PR_CALLBACK
DumpFiles(PLDHashTable* table, PLDHashEntryHdr* hdr,
          PRUint32 number, void* arg)
{
    ModulesEntry* entry = (ModulesEntry*) hdr;    
    Node*         cur = entry->byCount;
    char          dest[MAX_PATH];
    char          pdbName[MAX_PATH];
    FILE*         orderFile;

    strcpy(pdbName, entry->moduleName);
    strcat(pdbName, ".pdb");

    if (!::SearchTreeForFile(MOZ_SRC, pdbName, dest) ) {
        fprintf(logfile,"+++ERROR Could not find %s\n",pdbName);
        return PL_DHASH_NEXT;
    }
    dest[strlen(dest)-strlen(pdbName)-strlen("WIN32_D.OBJ\\")] = 0;
    strcat(dest,"win32.order");
    orderFile = fopen(dest,"w");
    fprintf(logfile,"Creating order file %s\n",dest);
    
    while (cur) {
        if (cur->function[0] == '_')  // demangle "C" style function names
            fprintf(orderFile,"%s ; %d %d\n", cur->function+1, cur->hits, cur->count );
        else
            fprintf(orderFile,"%s ; %d %d\n", cur->function, cur->hits, cur->count );
        cur = cur->next;
    }

    fflush(orderFile);
    fclose(orderFile);
    return PL_DHASH_NEXT;
}

/*
   We have a function name.  Figure out which module it is from.  Then add that
   function and its call count into the module's sorted list.
*/

static PLDHashOperator PR_CALLBACK
ListCounts(PLDHashTable* table, PLDHashEntryHdr* hdr,
           PRUint32 number, void* arg)
{
    BOOL ok;
    CallEntry* entry = (CallEntry*) hdr;

    IMAGEHLP_MODULE module;
    module.SizeOfStruct = sizeof(module);

    ok = ::SymGetModuleInfo(::GetCurrentProcess(),
                            (unsigned) entry->addr,
                            &module);

    char buf[sizeof(IMAGEHLP_SYMBOL) + 512];
    PIMAGEHLP_SYMBOL symbol = (PIMAGEHLP_SYMBOL) buf;
    symbol->SizeOfStruct = sizeof(buf);
    symbol->MaxNameLength = 512;

    DWORD displacement;
    ok = ::SymGetSymFromAddr(::GetCurrentProcess(),
                             (unsigned) entry->addr,
                             &displacement,
                             symbol);

    if (ok)
    {
        if (displacement > 0) 
            return PL_DHASH_NEXT;
        static int modInitialized = 0;
        if (!modInitialized) {
            modInitialized = PL_DHashTableInit(&Modules, &ModOps, 0, sizeof(ModulesEntry), 16);
            if (!modInitialized)
                return PL_DHASH_NEXT;
        }

        ModulesEntry* mod
            = (ModulesEntry*) PL_DHashTableOperate(&Modules,
                                                   module.ModuleName,
                                                   PL_DHASH_ADD);
        if (!mod)
            return PL_DHASH_STOP;       // OOM

        if (!mod->moduleName) {
            mod->moduleName = strdup(module.ModuleName);
            mod->byCount = new Node();
            mod->byCount->function = strdup(symbol->Name);
            mod->byCount->count = entry->count;
            mod->byCount->hits = entry->hits;
        } else {
            // insertion sort.
            Node* cur = mod->byCount;
            Node* foo = new Node();
            foo->function = strdup(symbol->Name);
            foo->count = entry->count;
            foo->hits = entry->hits;

            if
#if defined(SORT_BY_CALL_COUNT)
                (cur->count < entry->count)
#else
                ((cur->hits < entry->hits) || (cur->hits == entry->hits && cur->count < entry->count))
#endif
            {
                if (!strcmp(cur->function,symbol->Name)) 
                    return PL_DHASH_NEXT;
                foo->next = mod->byCount;
                mod->byCount = foo;                
            } else {
                while (cur->next) {
                    if (!strcmp(cur->function,symbol->Name)) 
                        return PL_DHASH_NEXT;
                    if
#if defined(SORT_BY_CALL_COUNT)
                        (cur->next->count > entry->count)
#else
                        ((cur->next->hits > entry->hits) || (cur->next->hits == entry->hits && cur->next->count > entry->count))
#endif
                    { cur = cur->next; }
                    else { break; }
                }
                foo->next = cur->next;  
                cur->next = foo;
            }
        }
    } // if (ok)
    return PL_DHASH_NEXT;
}

Reporter::~Reporter()
{
    SymInitialize(GetCurrentProcess(), 0, TRUE);
    
    DWORD options = SymGetOptions();

    // We want the nasty name, as we'll have to pass it back to the
    // linker.
    options &= ~SYMOPT_UNDNAME;
    SymSetOptions(options);

    char logName[MAX_PATH];
    strcpy(logName,MOZ_SRC);
    strcat(logName,"\\tracelog");
    logfile = fopen(logName,"w");

    // break the function names out by module and sort them.
    PL_DHashTableEnumerate(&Calls, ListCounts, NULL);
    // dump the order files for each module.
    PL_DHashTableEnumerate(&Modules, DumpFiles, NULL);

    fclose(logfile);
    SymCleanup(GetCurrentProcess());
}