pjs/xpcom/ds/pldhash.h

/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 *
 * The contents of this file are subject to the Netscape Public
 * License Version 1.1 (the "License"); you may not use this file
 * except in compliance with the License. You may obtain a copy of
 * the License at http://www.mozilla.org/NPL/
 *
 * Software distributed under the License is distributed on an "AS
 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express oqr
 * implied. See the License for the specific language governing
 * rights and limitations under the License.
 *
 * The Original Code is Mozilla JavaScript code.
 *
 * The Initial Developer of the Original Code is Netscape
 * Communications Corporation.  Portions created by Netscape are
 * Copyright (C) 1999,2000 Netscape Communications Corporation.
 * All Rights Reserved.
 *
 * Contributor(s): 
 *
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU Public License (the "GPL"), in which case the
 * provisions of the GPL are applicable instead of those above.
 * If you wish to allow use of your version of this file only
 * under the terms of the GPL and not to allow others to use your
 * version of this file under the NPL, indicate your decision by
 * deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL.  If you do not delete
 * the provisions above, a recipient may use your version of this
 * file under either the NPL or the GPL.
 */

#ifndef pldhash_h___
#define pldhash_h___
/*
 * Double hashing, a la Knuth 6.
 * GENERATED BY js/src/plify_jsdhash.sed -- DO NOT EDIT!!!
 */
#include "prtypes.h"

PR_BEGIN_EXTERN_C

/* Minimum table size, or gross entry count (net is at most .75 loaded). */
#ifndef PL_DHASH_MIN_SIZE
#define PL_DHASH_MIN_SIZE 16
#endif

/*
 * Multiplicative hash uses an unsigned 32 bit integer and the golden ratio,
 * expressed as a fixed-point 32-bit fraction.
 */
#define PL_DHASH_BITS           32
#define PL_DHASH_GOLDEN_RATIO   0x9E3779B9U

/* Primitive and forward-struct typedefs. */
typedef PRUint32                PLDHashNumber;
typedef struct PLDHashEntryHdr  PLDHashEntryHdr;
typedef struct PLDHashEntryStub PLDHashEntryStub;
typedef struct PLDHashTable     PLDHashTable;
typedef struct PLDHashTableOps  PLDHashTableOps;

/*
 * Table entry header structure.
 *
 * In order to allow in-line allocation of key and value, we do not declare
 * either here.  Instead, the API uses const void *key as a formal parameter,
 * and asks each entry for its key when necessary via a getKey callback, used
 * when growing or shrinking the table.  Other callback types are defined
 * below and grouped into the PLDHashTableOps structure, for single static
 * initialization per hash table sub-type.
 *
 * Each hash table sub-type should nest the PLDHashEntryHdr structure at the
 * front of its particular entry type.  The keyHash member contains the result
 * of multiplying the hash code returned from the hashKey callback (see below)
 * by PL_DHASH_GOLDEN_RATIO.  Its value is table size invariant.  keyHash is
 * maintained automatically by PL_DHashTableOperate -- users should never set
 * it, and its only uses should be via the entry macros below.
 */
struct PLDHashEntryHdr {
    PLDHashNumber       keyHash;        /* every entry must begin like this */
};

#define PL_DHASH_ENTRY_IS_FREE(entry)   ((entry)->keyHash == 0)
#define PL_DHASH_ENTRY_IS_BUSY(entry)   (!PL_DHASH_ENTRY_IS_FREE(entry))

/*
 * A PLDHashTable is currently 8 words (without the PL_DHASHMETER overhead)
 * on most architectures, and may be allocated on the stack or within another
 * structure or class (see below for the Init and Finish functions to use).
 */
struct PLDHashTable {
    PLDHashTableOps     *ops;           /* virtual operations, see below */
    void                *data;          /* ops- and instance-specific data */
    PRInt16             hashShift;      /* multiplicative hash shift */
    PRInt16             sizeLog2;       /* log2(table size) */
    PRUint32            sizeMask;       /* PR_BITMASK(log2(table size)) */
    PRUint32            entrySize;      /* number of bytes in an entry */
    PRUint32            entryCount;     /* number of entries in table */
    PRUint32            removedCount;   /* removed entry sentinels in table */
    char                *entryStore;    /* entry storage */
#ifdef PL_DHASHMETER
    struct PLDHashStats {
        PRUint32        searches;       /* total number of table searches */
        PRUint32        steps;          /* hash chain links traversed */
        PRUint32        hits;           /* searches that found key */
        PRUint32        misses;         /* searches that didn't find key */
        PRUint32        lookups;        /* number of PL_DHASH_LOOKUPs */
        PRUint32        addMisses;      /* adds that miss, and do work */
        PRUint32        addHits;        /* adds that hit an existing entry */
        PRUint32        addFailures;    /* out-of-memory during add growth */
        PRUint32        removeHits;     /* removes that hit, and do work */
        PRUint32        removeMisses;   /* useless removes that miss */
        PRUint32        removeEnums;    /* removes done by Enumerate */
        PRUint32        grows;          /* table expansions */
        PRUint32        shrinks;        /* table contractions */
    } stats;
#endif
};

#ifndef CRT_CALL
#ifdef XP_OS2_VACPP
#define CRT_CALL _Optlink
#else
#define CRT_CALL
#endif
#endif

/*
 * Table space at entryStore is allocated and freed using these callbacks.
 * The allocator should return null on error only (not if called with nbytes
 * equal to 0; but note that jsdhash.c code will never call with 0 nbytes).
 */
typedef void *
(* CRT_CALL PLDHashAllocTable)(PLDHashTable *table, PRUint32 nbytes);

typedef void
(* CRT_CALL PLDHashFreeTable) (PLDHashTable *table, void *ptr);

/*
 * When a table grows or shrinks, each entry is queried for its key using this
 * callback.  NB: in that event, entry is not in table any longer; it's in the
 * old entryStore vector, which is due to be freed once all entries have been
 * moved via moveEntry callbacks.
 */
typedef const void *
(* CRT_CALL PLDHashGetKey)    (PLDHashTable *table, PLDHashEntryHdr *entry);

/*
 * Compute the hash code for a given key to be looked up, added, or removed
 * from table.  A hash code may have any PLDHashNumber value.
 */
typedef PLDHashNumber
(* CRT_CALL PLDHashHashKey)   (PLDHashTable *table, const void *key);

/*
 * Compare the key identifying entry in table with the provided key parameter.
 * Return PR_TRUE if keys match, PR_FALSE otherwise.
 */
typedef PRBool
(* CRT_CALL PLDHashMatchEntry)(PLDHashTable *table,
                               const PLDHashEntryHdr *entry,
                               const void *key);

/*
 * Copy the data starting at from to the new entry storage at to.  Do not add
 * reference counts for any strong references in the entry, however, as this
 * is a "move" operation: the old entry storage at from will be freed without
 * any reference-decrementing callback shortly.
 */
typedef void
(* CRT_CALL PLDHashMoveEntry)(PLDHashTable *table,
                              const PLDHashEntryHdr *from,
                              PLDHashEntryHdr *to);

/*
 * Clear the entry and drop any strong references it holds.  This callback is
 * invoked during a PL_DHASH_REMOVE operation (see below for operation codes),
 * but only if the given key is found in the table.
 */
typedef void
(* CRT_CALL PLDHashClearEntry)(PLDHashTable *table, PLDHashEntryHdr *entry);

/*
 * Called when a table (whether allocated dynamically by itself, or nested in
 * a larger structure, or allocated on the stack) is finished.  This callback
 * allows table->ops-specific code to finalize table->data.
 */
typedef void
(* CRT_CALL PLDHashFinalize)  (PLDHashTable *table);

/* Finally, the "vtable" structure for PLDHashTable. */
struct PLDHashTableOps {
    PLDHashAllocTable   allocTable;
    PLDHashFreeTable    freeTable;
    PLDHashGetKey       getKey;
    PLDHashHashKey      hashKey;
    PLDHashMatchEntry   matchEntry;
    PLDHashMoveEntry    moveEntry;
    PLDHashClearEntry   clearEntry;
    PLDHashFinalize     finalize;
};

/*
 * Default implementations for the above ops.
 */
PR_EXTERN(void *)
PL_DHashAllocTable(PLDHashTable *table, PRUint32 nbytes);

PR_EXTERN(void)
PL_DHashFreeTable(PLDHashTable *table, void *ptr);

PR_EXTERN(PLDHashNumber)
PL_DHashStringKey(PLDHashTable *table, const void *key);

/* A minimal entry contains a keyHash header and a void key pointer. */
struct PLDHashEntryStub {
    PLDHashEntryHdr hdr;
    const void      *key;
};

PR_EXTERN(const void *)
PL_DHashGetKeyStub(PLDHashTable *table, PLDHashEntryHdr *entry);

PR_EXTERN(PLDHashNumber)
PL_DHashVoidPtrKeyStub(PLDHashTable *table, const void *key);

PR_EXTERN(PRBool)
PL_DHashMatchEntryStub(PLDHashTable *table,
                       const PLDHashEntryHdr *entry,
                       const void *key);

PR_EXTERN(void)
PL_DHashMoveEntryStub(PLDHashTable *table,
                      const PLDHashEntryHdr *from,
                      PLDHashEntryHdr *to);

PR_EXTERN(void)
PL_DHashClearEntryStub(PLDHashTable *table, PLDHashEntryHdr *entry);

PR_EXTERN(void)
PL_DHashFinalizeStub(PLDHashTable *table);

/*
 * If you use PLDHashEntryStub or a subclass of it as your entry struct, and
 * if your entries move via memcpy and clear via memset(0), you can use these
 * stub operations.
 */
PR_EXTERN(PLDHashTableOps *)
PL_DHashGetStubOps(void);

/*
 * Dynamically allocate a new PLDHashTable using malloc, initialize it using
 * PL_DHashTableInit, and return its address.  Return null on malloc failure.
 * Note that the entry storage at table->entryStore will be allocated using
 * the ops->allocTable callback.
 */
PR_EXTERN(PLDHashTable *)
PR_NewDHashTable(PLDHashTableOps *ops, void *data, PRUint32 entrySize,
                 PRUint32 capacity);

/*
 * Finalize table's data, free its entry storage (via table->ops->freeTable),
 * and return the memory starting at table to the malloc heap.
 */
PR_EXTERN(void)
PL_DHashTableDestroy(PLDHashTable *table);

/*
 * Initialize table with ops, data, entrySize, and capacity.  Capacity is a
 * guess for the smallest table size at which the table will usually be less
 * than 75% loaded (the table will grow or shrink as needed; capacity serves
 * only to avoid inevitable early growth from PL_DHASH_MIN_SIZE).
 */
PR_EXTERN(PRBool)
PL_DHashTableInit(PLDHashTable *table, PLDHashTableOps *ops, void *data,
                  PRUint32 entrySize, PRUint32 capacity);

/*
 * Finalize table's data, free its entry storage using table->ops->freeTable,
 * and leave its members unchanged from their last live values (which leaves
 * pointers dangling).  If you want to burn cycles clearing table, it's up to
 * your code to call memset.
 */
PR_EXTERN(void)
PL_DHashTableFinish(PLDHashTable *table);

/*
 * To consolidate keyHash computation and table grow/shrink code, we use a
 * single entry point for lookup, add, and remove operations.  The operation
 * codes are declared here, along with codes returned by PLDHashEnumerator
 * functions, which control PL_DHashTableEnumerate's behavior.
 */
typedef enum PLDHashOperator {
    PL_DHASH_LOOKUP = 0,        /* lookup entry */
    PL_DHASH_ADD = 1,           /* add entry */
    PL_DHASH_REMOVE = 2,        /* remove entry, or enumerator says remove */
    PL_DHASH_NEXT = 0,          /* enumerator says continue */
    PL_DHASH_STOP = 1           /* enumerator says stop */
} PLDHashOperator;

/*
 * To lookup a key in table, call:
 *
 *  entry = PL_DHashTableOperate(table, key, PL_DHASH_LOOKUP);
 *
 * If PL_DHASH_ENTRY_IS_BUSY(entry) is true, key was found and it identifies
 * entry.  If PL_DHASH_ENTRY_IS_FREE(entry) is true, key was not found.
 *
 * To add an entry identified by key to table, call:
 *
 *  entry = PL_DHashTableOperate(table, key, PL_DHASH_ADD);
 *
 * If entry is null upon return, the table is severely overloaded, and new
 * memory can't be allocated for new entry storage via table->ops->allocTable.
 * Otherwise, entry->keyHash has been set so that PL_DHASH_ENTRY_IS_BUSY(entry)
 * is true, and it is up to the caller to initialize the key and value parts
 * of the entry sub-type, if they have not been set already (i.e. if entry was
 * not already in the table).
 *
 * To remove an entry identified by key from table, call:
 *
 *  (void) PL_DHashTableOperate(table, key, PL_DHASH_REMOVE);
 *
 * If key's entry is found, it is cleared (via table->ops->clearEntry) and
 * the entry is marked so that PL_DHASH_ENTRY_IS_FREE(entry).  This operation
 * returns null unconditionally; you should ignore its return value.
 */
PR_EXTERN(PLDHashEntryHdr *)
PL_DHashTableOperate(PLDHashTable *table, const void *key, PLDHashOperator op);

/*
 * Remove an entry already accessed via LOOKUP or ADD.
 *
 * NB: this is a "raw" or low-level routine, intended to be used only where
 * the inefficiency of a full PL_DHashTableOperate (which rehashes in order
 * to find the entry given its key) is not tolerable.  This function does not
 * shrink the table if it is underloaded.  It does not update stats #ifdef
 * PL_DHASHMETER, either.
 */
PR_EXTERN(void)
PL_DHashTableRawRemove(PLDHashTable *table, PLDHashEntryHdr *entry);

/*
 * Enumerate entries in table using etor:
 *
 *   count = PL_DHashTableEnumerate(table, etor, arg);
 *
 * PL_DHashTableEnumerate calls etor like so:
 *
 *   op = etor(table, entry, number, arg);
 *
 * where number is a zero-based ordinal assigned to live entries according to
 * their order in table->entryStore.
 *
 * The return value, op, is treated as a set of flags.  If op is PL_DHASH_NEXT,
 * then continue enumerating.  If op contains PL_DHASH_REMOVE, then clear (via
 * table->ops->clearEntry) and free entry.  Then we check whether op contains
 * PL_DHASH_STOP; if so, stop enumerating and return the number of live entries
 * that were enumerated so far.  Return the total number of live entries when
 * enumeration completes normally.
 *
 * If etor calls PL_DHashTableOperate on table, it must return PL_DHASH_STOP;
 * otherwise undefined behavior results.
 */
typedef PLDHashOperator
(* CRT_CALL PLDHashEnumerator)(PLDHashTable *table, PLDHashEntryHdr *hdr,
                               PRUint32 number, void *arg);

PR_EXTERN(PRUint32)
PL_DHashTableEnumerate(PLDHashTable *table, PLDHashEnumerator etor, void *arg);

#ifdef PL_DHASHMETER
#include <stdio.h>

PR_EXTERN(void)
PL_DHashTableDumpMeter(PLDHashTable *table, PLDHashEnumerator dump, FILE *fp);
#endif

PR_END_EXTERN_C

#endif /* pldhash_h___ */