pjs/xpfe/bootstrap/nsAppRunner.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 *
 * The contents of this file are subject to the Netscape Public License
 * Version 1.0 (the "License"); you may not use this file except in
 * compliance with the License.  You may obtain a copy of the License at
 * http://www.mozilla.org/NPL/
 *
 * Software distributed under the License is distributed on an "AS IS"
 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See
 * the License for the specific language governing rights and limitations
 * under the License.
 *
 * The Original Code is Mozilla Communicator client code.
 *
 * The Initial Developer of the Original Code is Netscape Communications
 * Corporation.  Portions created by Netscape are Copyright (C) 1998
 * Netscape Communications Corporation.  All Rights Reserved.
 */
#include "nsIServiceManager.h"
#include "nsIComponentManager.h"
#include "nsIURL.h"
#include "nsIWidget.h"
#include "nsIPref.h"
#include "plevent.h"
#include "prmem.h"

#include "nsIAppShell.h"
#include "nsICmdLineService.h"
#include "nsIThread.h"
#include "nsIAppShellService.h"
#include "nsIAppShellComponent.h"
#include "nsAppShellCIDs.h"
#include "prprf.h"
#include "nsCRT.h"
#include "nsFileSpec.h"
#include "nsIFileSpec.h"
#include "nsIFileLocator.h"
#include "nsIPrefWindow.h"
#include "nsFileLocations.h"
#include "nsFileStream.h"
#include "nsSpecialSystemDirectory.h"

// Temporary stuff.
#include "nsIDOMToolkitCore.h"
#include "nsAppCoresCIDs.h"
static NS_DEFINE_CID( kToolkitCoreCID, NS_TOOLKITCORE_CID );

#ifdef MOZ_FULLCIRCLE
#include "fullsoft.h"
#endif

// header file for profile manager
#include "nsIProfile.h"
// Uncomment this line to skip the profile code compilation
//#include "profileSwitch.h"

#if defined(XP_MAC)
#include "macstdlibextras.h"
#include <TextServices.h>
  // Set up the toolbox and (if DEBUG) the console.  Do this in a static initializer,
  // to make it as unlikely as possible that somebody calls printf() before we get initialized.
static struct MacInitializer { MacInitializer() { InitializeMacToolbox(); } } gInitializer;
#endif // XP_MAC

/* Define Class IDs */
static NS_DEFINE_IID(kAppShellServiceCID,   NS_APPSHELL_SERVICE_CID);
static NS_DEFINE_IID(kCmdLineServiceCID,    NS_COMMANDLINE_SERVICE_CID);
static NS_DEFINE_CID(kPrefCID,              NS_PREF_CID);
static NS_DEFINE_CID(kFileLocatorCID,       NS_FILELOCATOR_CID);

/* Define Interface IDs */
static NS_DEFINE_IID(kIAppShellServiceIID,  NS_IAPPSHELL_SERVICE_IID);
static NS_DEFINE_IID(kICmdLineServiceIID,   NS_ICOMMANDLINE_SERVICE_IID);
static NS_DEFINE_IID(kIFileLocatorIID,      NS_IFILELOCATOR_IID);

// defined for profileManager
#if defined(NS_USING_PROFILES)
static NS_DEFINE_CID(kProfileCID,           NS_PROFILE_CID);
#endif // XP_PC

/*********************************************
 AppCores
*********************************************/

#include "nsAppCoresCIDs.h"
#include "nsIDOMAppCoresManager.h"

//static nsIDOMAppCoresManager *appCoresManager = nsnull;
static NS_DEFINE_IID(kIDOMAppCoresManagerIID, NS_IDOMAPPCORESMANAGER_IID);
static NS_DEFINE_IID(kAppCoresManagerCID,     NS_APPCORESMANAGER_CID);

/*********************************************/

/*
 * This routine translates the nsresult into a platform specific return
 * code for the application...
 */
static int TranslateReturnValue(nsresult aResult)
{
  if (NS_SUCCEEDED(aResult)) {
    return 0;
  }
  return 1;
}


extern "C" void NS_SetupRegistry_1();

static void
PrintUsage(void)
{
   fprintf(stderr, "Usage: apprunner <url>\n");
   fprintf(stderr, "\t<url>:  a fully defined url string like http:// etc..\n");
}


int main(int argc, char* argv[])
{
  nsresult rv;
  
  nsICmdLineService *  cmdLineArgs = nsnull;
  NS_VERIFY(NS_SUCCEEDED(nsIThread::SetMainThread()), "couldn't set main thread");

  char *  urlstr=nsnull;
  //char *   progname = nsnull;
  char *   width=nsnull, *height=nsnull;
  //char *  iconic_state=nsnull;

  PRInt32 widthVal  = 790;
  PRInt32 heightVal = 580;

  nsIAppShellService* appShell;
  nsIDOMAppCoresManager *appCoresManager;
  nsIURL* url;
  nsIPref *prefs;

  // initialization for Full Circle
#ifdef MOZ_FULLCIRCLE
  {
	  FC_ERROR fcstatus = FC_ERROR_FAILED;
	  fcstatus = FCInitialize();
	  
	  // Print out error status.
	  switch(fcstatus) {
	  case FC_ERROR_OK:
		  printf("Talkback loaded Ok.\n");
		  break;
	  case FC_ERROR_CANT_INITIALIZE:
		  printf("Talkback error: Can't initialize.\n");
		  break;
	  case FC_ERROR_NOT_INITIALIZED:
		  printf("Talkback error: Not initialized.\n");
		  break;
	  case FC_ERROR_ALREADY_INITIALIZED:
		  printf("Talkback error: Already initialized.\n");
		  break;
	  case FC_ERROR_FAILED:
		  printf("Talkback error: Failure.\n");
		  break;
	  case FC_ERROR_OUT_OF_MEMORY:
		  printf("Talkback error: Out of memory.\n");
		  break;
	  case FC_ERROR_INVALID_PARAMETER:
		  printf("Talkback error: Invalid parameter.\n");
		  break;
	  default:
		  printf("Talkback error: Unknown error status.\n");
		  break;
	  }
  }
#endif

  // initializations for profile manager
#if defined(NS_USING_PROFILES)
	nsFileSpec currProfileDirSpec;
	PRBool profileDirSet = PR_FALSE;
	nsIProfile *profileService = nsnull;
	char *profstr = nsnull;
#endif // defined(NS_USING_PROFILES)

  /* 
   * initialize all variables that are NS_IF_RELEASE(...) during
   * cleanup...
   */
  url             = nsnull;
  prefs           = nsnull;
  appShell        = nsnull;
  cmdLineArgs     = nsnull;
  appCoresManager = nsnull;

  char* cmdResult = nsnull;

  // These manage funky stuff with ensuring onload handler getting called at
  // the correct time.  The problem is that upcoming (or recent)
  // changes will result in the .xul window's onload handler getting called
  // prior to execution of nsIXULWindowCallback's ContructBeforeJavaScript.
  // This will break windows whose onload handler must execute subsequent to
  // that callback mechanism (i.e., those that may need "args").  The short-term
  // fix (ultimately, these windows will receive arguments via different means)
  // is to trigger the pseudo-onload handler from the ConstructBeforeJavaScript
  // code.  The problem is those windows that are not always constructed with an
  // nsIXULWindowCallbacks, i.e., the editor.  The fix here is to ensure that
  // the toolkit core's ShowWindowWithArgs function is used to open the editor.
  // Whew.  For details, call me (law@netscape.com, x2296).  This code is only
  // temporary!
  nsString withArgs;
  PRBool useArgs = PR_FALSE;

  /*
   * Initialize XPCOM.  Ultimately, this should be a function call such as
   * NS_XPCOM_Initialize(...).
   *
   * - PL_EventsLib(...)
   * - Repository
   * - ServiceManager
   */
  // XXX: This call will be replaced by a registry initialization...
  NS_SetupRegistry_1();

  nsIFileLocator* locator = nsnull;
  rv = nsServiceManager::GetService(kFileLocatorCID, kIFileLocatorIID, (nsISupports**)&locator);
  if (NS_FAILED(rv))
      return rv;
  if (!locator)
      return NS_ERROR_FAILURE;

  // get and start the ProfileManager service
#if defined(NS_USING_PROFILES)
  rv = nsServiceManager::GetService(kProfileCID, 
                                    nsIProfile::GetIID(), 
                                    (nsISupports **)&profileService);
  

  if (NS_FAILED(rv)) {
    goto done;
  }
  profileService->Startup(nsnull);

#endif // defined(NS_USING_PROFILES)



  /*
   * Start up the core services:
   *  - Command-line processor.
   */

  rv = nsServiceManager::GetService(kCmdLineServiceCID,
                                    kICmdLineServiceIID,
                                    (nsISupports **)&cmdLineArgs);
  if (NS_FAILED(rv)) {
    fprintf(stderr, "Could not obtain CmdLine processing service\n");
    goto done;
  }

  // Initialize the cmd line service 
  rv = cmdLineArgs->Initialize(argc, argv);
  if (rv  == NS_ERROR_INVALID_ARG) {
    PrintUsage();
    goto done;
  }
  
#if 0
  // Get the URL to load
  rv = cmdLineArgs->GetURLToLoad(&urlstr);
  if (rv  == NS_ERROR_INVALID_ARG) {
    PrintUsage();
    goto done;
  }
#endif  /* 0 */

  // Default URL if one was not provided in the cmdline
  // Changed by kostello on 2/10/99 to look for -editor
  // or -mail command line and load the appropriate URL.
  // Please let me know if this is incorrect and I will
  // change it. -- Greg Kostello
  if (nsnull == urlstr){

#if defined(NS_USING_PROFILES)
	// check for command line arguments for profile manager
  //	
	// -P command line option works this way:
	// apprunner -P profilename 
	// runs the app using the profile <profilename> 
	// remembers profile for next time 
	rv = cmdLineArgs->GetCmdLineValue("-P", &cmdResult);
    if (NS_SUCCEEDED(rv))
    {
		if (cmdResult) {
			char* currProfileName = cmdResult;

			fprintf(stderr, "ProfileName : %s\n", cmdResult);
			
			rv = profileService->GetProfileDir(currProfileName, &currProfileDirSpec);
			printf("** ProfileDir  :  %s **\n", currProfileDirSpec.GetCString());
			
			if (NS_SUCCEEDED(rv)){
				profileDirSet = PR_TRUE;
			}
		}
    }

	// -CreateProfile command line option works this way:
	// apprunner -CreateProfile profilename 
	// creates a new profile named <profilename> and sets the directory to your CWD 
	// runs app using that profile 
	// remembers profile for next time 
	//                         - OR -
	// apprunner -CreateProfile "profilename profiledir" 
	// creates a new profile named <profilename> and sets the directory to <profiledir> 
	// runs app using that profile 
	// remembers profile for next time

	rv = cmdLineArgs->GetCmdLineValue("-CreateProfile", &cmdResult);
    if (NS_SUCCEEDED(rv))
    {
		if (cmdResult) {
			char* currProfileName = strtok(cmdResult, " ");
            char* currProfileDirString = strtok(NULL, " ");
			
			if (currProfileDirString)
			    currProfileDirSpec = currProfileDirString;
			else
			{
				// No directory name provided. Get File Locator
				nsIFileLocator* locator = nsnull;
				rv = nsServiceManager::GetService(kFileLocatorCID, kIFileLocatorIID, (nsISupports**)&locator);
				if (NS_FAILED(rv) || !locator)
					return NS_ERROR_FAILURE;
				
				// Get current profile, make the new one a sibling...
				nsIFileSpec* spec;
				rv = locator->GetFileLocation(nsSpecialFileSpec::App_UserProfileDirectory50, &spec);
				if (NS_FAILED(rv) || !spec)
					return NS_ERROR_FAILURE;
				spec->GetFileSpec(&currProfileDirSpec);
				NS_RELEASE(spec);
				currProfileDirSpec.SetLeafName(currProfileName);

				if (locator)
				{
					rv = locator->ForgetProfileDir();
					nsServiceManager::ReleaseService(kFileLocatorCID, locator);
				}
			}

			fprintf(stderr, "profileName & profileDir are: %s\n", cmdResult);
			profileService->SetProfileDir(currProfileName, currProfileDirSpec);
	  		profileDirSet = PR_TRUE;
			
		}
    }

	// Start Profile Manager
	rv = cmdLineArgs->GetCmdLineValue("-ProfileManager", &cmdResult);
    if (NS_SUCCEEDED(rv))
    {		
		if (cmdResult) {
			profstr = "resource:/res/profile/profileManagerContainer.xul"; 
		}
    }

	// Start Profile Wizard
	rv = cmdLineArgs->GetCmdLineValue("-ProfileWizard", &cmdResult);
    if (NS_SUCCEEDED(rv))
    {		
		if (cmdResult) {
			profstr = "resource:/res/profile/cpw.xul"; 
		}
    }

	// Start Migaration activity
	rv = cmdLineArgs->GetCmdLineValue("-installer", &cmdResult);
    if (NS_SUCCEEDED(rv))
    {		
		if (cmdResult) {
#ifdef XP_PC
			profileService->MigrateProfileInfo(); 
#endif
			profstr = "resource:/res/profile/profileManagerContainer.xul";
		}
    }

#endif // defined(NS_USING_PROFILES)
    
    rv = cmdLineArgs->GetCmdLineValue("-editor", &cmdResult);
    if (NS_SUCCEEDED(rv))
    {
      if (cmdResult && (strcmp("1",cmdResult)==0)) {
        urlstr = "chrome://editor/content/";
        useArgs = PR_TRUE;
        withArgs = "chrome://editor/content/EditorInitPage.html";
      }
    }
    if (nsnull == urlstr)
    {
      rv = cmdLineArgs->GetCmdLineValue("-mail", &cmdResult);
      if (NS_SUCCEEDED(rv))
      {
        if (cmdResult && (strcmp("1",cmdResult)==0))
          urlstr = "chrome://messenger/content/";
      }
    }
    if (nsnull == urlstr)
    {    
      urlstr = "chrome://navigator/content/";
    }
  }
  else
      fprintf(stderr, "URL to load is %s\n", urlstr);


  // Get the value of -width option
  rv = cmdLineArgs->GetCmdLineValue("-width", &width);
  if (NS_FAILED(rv)) {
    goto done;
  }
  if (width) {
    PR_sscanf(width, "%d", &widthVal);
    fprintf(stderr, "Width is set to %d\n", widthVal);
  } else {
    fprintf(stderr, "width was not set\n");
  }
  
  // Get the value of -height option
  rv = cmdLineArgs->GetCmdLineValue("-height", &height);
  if (NS_FAILED(rv)) {
    goto done;
  }
  if (height) {
    PR_sscanf(height, "%d", &heightVal);
    fprintf(stderr, "height is set to %d\n", heightVal);
  } else {
    fprintf(stderr, "height was not set\n");
  }
  
  /*
   * Load preferences, causing them to be initialized, and hold a reference to them.
   */
  rv = nsServiceManager::GetService(kPrefCID, 
                                    nsIPref::GetIID(), 
                                    (nsISupports **)&prefs);
  if (NS_FAILED(rv))
    goto done;

  /*
   * Create the Application Shell instance...
   */
  rv = nsServiceManager::GetService(kAppShellServiceCID,
                                    kIAppShellServiceIID,
                                    (nsISupports**)&appShell);
  if (NS_FAILED(rv)) {
    goto done;
  }

  /*
   * Initialize the Shell...
   */
  rv = appShell->Initialize( cmdLineArgs );
  if (NS_FAILED(rv)) {
    goto done;
  }
 
  /*
   * Post an event to the shell instance to load the AppShell 
   * initialization routines...  
   * 
   * This allows the application to enter its event loop before having to 
   * deal with GUI initialization...
   */
  ///write me...
  nsIWebShellWindow* newWindow;
  
  rv = NS_NewURL(&url, urlstr);
  if (NS_FAILED(rv)) {
    goto done;
  }

  /* ********************************************************************* */
  /* This is a temporary hack to get mail working with autoregistration
   * This won't succeed unless messenger was found
   * through autoregistration, and will go away when the service manager
     * is accessable from JavaScript
     */
  /* Comments/questions to alecf@netscape.com */
  {
	/*MESSENGER*/
    nsCOMPtr<nsIAppShellComponent> messenger;
    //const char *messengerProgID = "component://netscape/messenger";
    nsresult result;

    /* this is so ugly, but ProgID->CLSID mapping seems to be broken -alecf */
#define NS_MESSENGERBOOTSTRAP_CID                 \
    { /* 4a85a5d0-cddd-11d2-b7f6-00805f05ffa5 */      \
      0x4a85a5d0, 0xcddd, 0x11d2,                     \
      {0xb7, 0xf6, 0x00, 0x80, 0x5f, 0x05, 0xff, 0xa5}}

    NS_DEFINE_CID(kCMessengerBootstrapCID, NS_MESSENGERBOOTSTRAP_CID);
    
    result = nsComponentManager::CreateInstance(kCMessengerBootstrapCID,
                                                nsnull,
                                                nsIAppShellComponent::GetIID(),
                                                getter_AddRefs(messenger));
    if (NS_SUCCEEDED(result)) 
      result = messenger->Initialize(appShell, cmdLineArgs);
 
	/*COMPOSER*/
    nsCOMPtr<nsIAppShellComponent> composer;
      //const char *composerProgID = "component://netscape/composer";

    /* this is so ugly, but ProgID->CLSID mapping seems to be broken -alecf */
#define NS_COMPOSERBOOTSTRAP_CID                 \
	{ /* 82041531-D73E-11d2-82A9-00805F2A0107 */      \
		0x82041531, 0xd73e, 0x11d2,                     \
		{0x82, 0xa9, 0x0, 0x80, 0x5f, 0x2a, 0x1, 0x7}}

    NS_DEFINE_CID(kCComposerBootstrapCID, NS_COMPOSERBOOTSTRAP_CID);
    
    result = nsComponentManager::CreateInstance(kCComposerBootstrapCID,
                                                nsnull,
                                                nsIAppShellComponent::GetIID(),
                                                getter_AddRefs(composer));
    if (NS_SUCCEEDED(result)) 
		result = composer->Initialize(appShell, cmdLineArgs);
  }
  /* End of mailhack */
  /* ********************************************************************* */

  // Support the "-pref" command-line option, which just puts up the pref window, so that
  // apprunner becomes a "control panel". The "OK" and "Cancel" buttons will quit
  // the application.
  rv = cmdLineArgs->GetCmdLineValue("-pref", &cmdResult);
  if (NS_SUCCEEDED(rv) && cmdResult && (strcmp("1",cmdResult) == 0))
  {
    nsIPrefWindow* prefWindow;
    rv = nsComponentManager::CreateInstance(
	  NS_PREFWINDOW_PROGID,
      nsnull,
      nsIPrefWindow::GetIID(),
      (void **)&prefWindow);
	if (NS_SUCCEEDED(rv))
	  prefWindow->showWindow(nsString("Apprunner::main()").GetUnicode(), nsnull, nsnull);
	NS_IF_RELEASE(prefWindow);
	goto done;
  }

  // Kick off appcores
  rv = nsServiceManager::GetService(kAppCoresManagerCID,
                                    kIDOMAppCoresManagerIID,
                                    (nsISupports**)&appCoresManager);
	if (NS_SUCCEEDED(rv)) {
		if (appCoresManager->Startup() != NS_OK) {
		  appCoresManager->Shutdown();
      nsServiceManager::ReleaseService(kAppCoresManagerCID, appCoresManager);
		}
  }

#if defined (NS_USING_PROFILES)
	/* 
	 * If default profile is current, launch CreateProfile Wizard. 
	 */ 
	if (!profileDirSet)
	{
		int numProfiles = 0; 
		nsIURL* profURL = nsnull;

		PRInt32 profWinWidth  = 615;
		PRInt32 profWinHeight = 500;

		nsIWebShellWindow*  profWindow;
		nsIAppShellService* profAppShell;

		/*
	 	 * Create the Application Shell instance...
		 */
		rv = nsServiceManager::GetService(kAppShellServiceCID,
                                    kIAppShellServiceIID,
                                    (nsISupports**)&profAppShell);
		if (NS_FAILED(rv)) {
			goto done;
		}

		profileService->GetProfileCount(&numProfiles); 

		NS_ASSERTION(numProfiles > 0, "Oops, no profiles yet!"); 
    
		if (!profstr)
		{
			if (numProfiles == 1)
			{
				char* profileName = nsnull;
				profileService->GetCurrentProfile(&profileName);
          
				if (profileName && strcmp(profileName, "default") == 0)
				{
					profstr = "resource:/res/profile/cpw.xul"; 
				}
			}

			if (numProfiles > 1)
			{
				profstr = "resource:/res/profile/profileManagerContainer.xul"; 
			}	
		}

		if (profstr)
		{
			rv = NS_NewURL(&profURL, profstr);
	
			if (NS_FAILED(rv)) {
				goto done;
			} 

			rv = profAppShell->CreateTopLevelWindow(nsnull, profURL, PR_TRUE, profWindow,
				       nsnull, nsnull, profWinWidth, profWinHeight);

			NS_RELEASE(profURL);
		
			if (NS_FAILED(rv)) 
			{
				goto done;
			}

			/*
			 * Start up the main event loop...
			 */	
			rv = profAppShell->Run();
		}
	}
#endif

  // Now we have the right profile, read the user-specific prefs.
  prefs->ReadUserPrefs();
 
  if ( !useArgs ) {
      rv = appShell->CreateTopLevelWindow(nsnull, url, PR_TRUE, newWindow,
                       nsnull, nsnull, widthVal, heightVal);
  } else {
      nsIDOMToolkitCore* toolkit = nsnull;
      rv = nsServiceManager::GetService(kToolkitCoreCID,
                                        nsIDOMToolkitCore::GetIID(),
                                        (nsISupports**)&toolkit);
      if (NS_SUCCEEDED(rv)) {
          nsIWebShellWindow* newWindow = nsnull;
          
          toolkit->ShowWindowWithArgs( urlstr, nsnull, withArgs );
          
          /* Release the toolkit... */
          if (nsnull != toolkit) {
            nsServiceManager::ReleaseService(kToolkitCoreCID, toolkit);
          }
      }
  }

  NS_RELEASE(url);
  if (NS_FAILED(rv)) {
    goto done;
  }

 
  /*
   * Start up the main event loop...
   */
  rv = appShell->Run();

  /*
   * Shut down the Shell instance...  This is done even if the Run(...)
   * method returned an error.
   */
  (void) appShell->Shutdown();

done:
  /* Release the services... */
#if 0
  if (nsnull != cmdLineArgs) {
    nsServiceManager::ReleaseService(kCmdLineProcessorCID, cmdLineArgs);
  }
#endif

  /* Release the shell... */
  if (nsnull != appShell) {
    nsServiceManager::ReleaseService(kAppShellServiceCID, appShell);
  }

  /* Release the AppCoresManager... */
  if (nsnull != appCoresManager) {
		appCoresManager->Shutdown();
    nsServiceManager::ReleaseService(kAppCoresManagerCID, appCoresManager);
  }

  /* Release the global preferences... */
  if (prefs) {
    prefs->SavePrefFile(); 
    prefs->ShutDown();
    nsServiceManager::ReleaseService(kPrefCID, prefs);
  }

#if defined(NS_USING_PROFILES)
  /* Release the global profile service... */
  if (profileService) {
    profileService->Shutdown();
    nsServiceManager::ReleaseService(kProfileCID, profileService);
  }
#endif // defined(NS_USING_PROFILES)

    nsServiceManager::ReleaseService(kFileLocatorCID, locator);

#ifdef XP_MAC
	(void)CloseTSMAwareApplication();
#endif
  /* 
   * Translate the nsresult into an appropriate platform-specific return code.
   */
  return TranslateReturnValue(rv);
}