pjs/xpfe/bootstrap/nsNativeAppSupportOS2.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 *
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Bill Law       law@netscape.com
 *   IBM Corp.
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#define INCL_PM
#define INCL_GPI
#define INCL_DOS
#define INCL_DOSERRORS
#include <os2.h>

#include "nsNativeAppSupportBase.h"
#include "nsNativeAppSupportOS2.h"
#include "nsICmdLineService.h"
#include "nsCOMPtr.h"
#include "nsIComponentManager.h"
#include "nsComponentManagerUtils.h"
#include "nsIServiceManager.h"
#include "nsIServiceManagerUtils.h"
#include "nsICmdLineHandler.h"
#include "nsIDOMWindow.h"
#include "nsXPCOM.h"
#include "nsISupportsPrimitives.h"
#include "nsISupportsArray.h"
#include "nsIWindowWatcher.h"
#include "nsIDOMWindowInternal.h"
#include "nsIScriptGlobalObject.h"
#include "nsIDocShell.h"         
#include "nsIBaseWindow.h"       
#include "nsIWidget.h"
#include "nsIAppShellService.h"
#include "nsIAppStartup.h"
#include "nsIProfileInternal.h"
#include "nsIXULWindow.h"
#include "nsIInterfaceRequestor.h"
#include "nsIInterfaceRequestorUtils.h"
#include "nsIPref.h"
#include "nsIPromptService.h"
#include "nsNetCID.h"
#include "nsIObserverService.h"

#ifdef XPCOM_GLUE
#include "nsStringSupport.h"
#else
#include "nsString.h"
#endif

// These are needed to load a URL in a browser window.
#include "nsIDOMLocation.h"
#include "nsIJSContextStack.h"
#include "nsIWindowMediator.h"

#include "nsPaletteOS2.h"

#include <sys/stat.h>
#include <stdlib.h>
#include <ctype.h>

#include "prprf.h"

// getting from nsAppRunner.  Use to help track down arguments.
extern char ** __argv;
extern int    __argc;

/* trying to keep this like Window's COPYDATASTRUCT, but a compiler error is
 * forcing me to add chBuff so that we can append the data to the end of the
 * structure
 */
typedef struct _COPYDATASTRUCT
{
   ULONG   dwData;
   ULONG   cbData;
   PVOID   lpData;
   CHAR    chBuff;
}COPYDATASTRUCT, *PCOPYDATASTRUCT;
#define WM_COPYDATA             (WM_USER + 60)

char szCommandLine[2*CCHMAXPATH];

static HWND hwndForDOMWindow( nsISupports * );

static
nsresult
GetMostRecentWindow(const PRUnichar* aType, nsIDOMWindowInternal** aWindow) {
    nsresult rv;
    nsCOMPtr<nsIWindowMediator> med( do_GetService( NS_WINDOWMEDIATOR_CONTRACTID, &rv ) );
    if ( NS_FAILED( rv ) )
        return rv;

    if ( med )
        return med->GetMostRecentWindow( aType, aWindow );

    return NS_ERROR_FAILURE;
}

static
void
activateWindow( nsIDOMWindowInternal *win ) {
    // Try to get native window handle.
    HWND hwnd = hwndForDOMWindow( win );
    if ( hwnd ) {

        /* if we are looking at a client window, then we really probably want
         * the frame so that we can manipulate THAT
         */
        LONG id = WinQueryWindowUShort( hwnd, QWS_ID );
        if( id == FID_CLIENT )
        {
           hwnd = WinQueryWindow( hwnd, QW_PARENT );
        }

        // Restore the window in case it is minimized.
        // Use the OS call, if possible.
        WinSetWindowPos( hwnd, 0L, 0L, 0L, 0L, 0L, 
                         SWP_SHOW | SWP_RESTORE | SWP_ACTIVATE );
    } else {
        // Use internal method.
        win->Focus();
    }
}



// Define this macro to 1 to get DDE debugging output.
#define MOZ_DEBUG_DDE 0

#ifdef DEBUG_law
#undef MOZ_DEBUG_DDE
#define MOZ_DEBUG_DDE 1
#endif

class nsSplashScreenOS2 : public nsISplashScreen {
public:
    nsSplashScreenOS2();
    ~nsSplashScreenOS2();

    NS_IMETHOD Show();
    NS_IMETHOD Hide();

    // nsISupports methods
    NS_IMETHOD_(nsrefcnt) AddRef() {
        mRefCnt++;
        return mRefCnt;
    }
    NS_IMETHOD_(nsrefcnt) Release() {
        --mRefCnt;
        if ( !mRefCnt ) {
            delete this;
            return 0;
        }
        return mRefCnt;
    }
    NS_IMETHOD QueryInterface( const nsIID &iid, void**p ) {
        nsresult rv = NS_OK;
        if ( p ) {
            *p = 0;
            if ( iid.Equals( NS_GET_IID( nsISplashScreen ) ) ) {
                nsISplashScreen *result = this;
                *p = result;
                NS_ADDREF( result );
            } else if ( iid.Equals( NS_GET_IID( nsISupports ) ) ) {
                nsISupports *result = NS_STATIC_CAST( nsISupports*, this );
                *p = result;
                NS_ADDREF( result );
            } else {
                rv = NS_NOINTERFACE;
            }
        } else {
            rv = NS_ERROR_NULL_POINTER;
        }
        return rv;
    }

    void SetDialog( HWND dlg );
    void LoadBitmap();
    static nsSplashScreenOS2* GetPointer( HWND dlg );

    HWND mDlg;
    HBITMAP mBitmap;
    nsrefcnt mRefCnt;
    HDC hdcMemory;
    HPS hpsMemory;
    LONG mBitmapCX;
    LONG mBitmapCY;
}; // class nsSplashScreenOS2

MRESULT EXPENTRY DialogProc( HWND dlg, ULONG msg, MPARAM mp1, MPARAM mp2 );
void ThreadProc (void *splashScreen);

// Simple Win32 mutex wrapper.
struct Mutex {
    Mutex( const char *name )
        : mName( name ),
          mHandle( 0 ),
          mState( 0xFFFF ) {
        /* OS/2 named semaphores must begin with "\\SEM32\\" to be valid */
        mName.Insert("\\SEM32\\", 0);
        APIRET rc = DosCreateMutexSem(mName.get(), &mHandle, 0, FALSE);
        if (rc != NO_ERROR) {
#if MOZ_DEBUG_DDE
            printf( "CreateMutex error = 0x%08X\n", (int)rc );
#endif
        }
    }
    ~Mutex() {
        if ( mHandle ) {
            // Make sure we release it if we own it.
            Unlock();


            APIRET rc = DosCloseMutexSem(mHandle);
            if (rc != NO_ERROR) {
#if MOZ_DEBUG_DDE
                printf( "CloseHandle error = 0x%08X\n", (int)rc );
#endif
            }
        }
    }
    BOOL Lock( DWORD timeout ) {
        if ( mHandle ) {
#if MOZ_DEBUG_DDE
            printf( "Waiting (%d msec) for DDE mutex...\n", (int)timeout );
#endif
            mState = DosRequestMutexSem( mHandle, timeout );
#if MOZ_DEBUG_DDE
            printf( "...wait complete, result = 0x%08X\n", (int)mState );
#endif
            return (mState == NO_ERROR);
        } else {
            return FALSE;
        }
    }
    void Unlock() {
        if ( mHandle && mState == NO_ERROR ) {
#if MOZ_DEBUG_DDE
            printf( "Releasing DDE mutex\n" );
#endif
            DosReleaseMutexSem( mHandle );
            mState = 0xFFFF;
        }
    }
private:
    nsCString mName;
    HMTX      mHandle;
    DWORD     mState;
};

/* DDE Notes
 *
 * This section describes the Win32 DDE service implementation for
 * Mozilla.  DDE is used on Win32 platforms to communicate between
 * separate instances of mozilla.exe (or other Mozilla-based
 * executables), or, between the Win32 desktop shell and Mozilla.
 *
 * The first instance of Mozilla will become the "server" and
 * subsequent executables (and the shell) will use DDE to send
 * requests to that process.  The requests are DDE "execute" requests
 * that pass the command line arguments.
 *
 * Mozilla registers the DDE application "Mozilla" and currently
 * supports only the "WWW_OpenURL" topic.  This should be reasonably
 * compatible with applications that interfaced with Netscape
 * Communicator (and its predecessors?).  Note that even that topic
 * may not be supported in a compatible fashion as the command-line
 * options for Mozilla are different than for Communiator.
 *
 * It is imperative that at most one instance of Mozilla execute in
 * "server mode" at any one time.  The "native app support" in Mozilla
 * on Win32 ensures that only the server process performs XPCOM
 * initialization (that is not required for subsequent client processes
 * to communicate with the server process).
 *
 * To guarantee that only one server starts up, a Win32 "mutex" is used
 * to ensure only one process executes the server-detection code.  That
 * code consists of initializing DDE and doing a DdeConnect to Mozilla's
 * application/topic.  If that connection succeeds, then a server process
 * must be running already.
 * 
 * Otherwise, no server has started.  In that case, the current process
 * calls DdeNameService to register that application/topic.  Only at that
 * point does the mutex get released.
 *
 * There are a couple of subtleties that one should be aware of:
 * 
 * 1. It is imperative that DdeInitialize be called only after the mutex
 *    lock has been obtained.  The reason is that at shutdown, DDE
 *    notifications go out to all initialized DDE processes.  Thus, if
 *    the mutex is owned by a terminating intance of Mozilla, then
 *    calling DdeInitialize and then WaitForSingleObject will cause the
 *    DdeUninitialize from the terminating process to "hang" until the
 *    process waiting for the mutex times out (and can then service the
 *    notification that the DDE server is terminating).  So, don't mess
 *    with the sequence of things in the startup/shutdown logic.
 *
 * 2. All mutex requests are made with a reasonably long timeout value and
 *    are designed to "fail safe" (i.e., a timeout is treated as failure).
 * 
 * 3. An attempt has been made to minimize the degree to which the main
 *    Mozilla application logic needs to be aware of the DDE mechanisms
 *    implemented herein.  As a result, this module surfaces a very
 *    large-grained interface, consisting of simple start/stop methods.
 *    As a consequence, details of certain scenarios can be "lost."
 *    Particularly, incoming DDE requests can arrive after this module
 *    initiates the DDE server, but before Mozilla is initialized to the
 *    point where those requests can be serviced (e.g., open a browser
 *    window to a particular URL).  Since the client process sends the
 *    request early on, it may not be prepared to respond to that error.
 *    Thus, such situations may fail silently.  The design goal is that
 *    they fail harmlessly.  Refinements on this point will be made as
 *    details emerge (and time permits).
 */

/* Update 2001 March
 *
 * A significant DDE bug in Windows is causing Mozilla to get wedged at
 * startup.  This is detailed in Bugzill bug 53952
 * (http://bugzilla.mozilla.org/show_bug.cgi?id=53952).
 *
 * To resolve this, we are using a new strategy:
 *   o Use a "message window" to detect that Mozilla is already running and
 *     to pass requests from a second instance back to the first;
 *   o Run only as a "DDE server" (not as DDE client); this avoids the
 *     problematic call to DDEConnect().
 *
 * We still use the mutex semaphore to protect the code that detects
 * whether Mozilla is already running.
 */

class nsNativeAppSupportOS2 : public nsNativeAppSupportBase
{
public:
    // Overrides of base implementation.
    NS_IMETHOD Start( PRBool *aResult );
    NS_IMETHOD Stop( PRBool *aResult );
    NS_IMETHOD Quit();
    NS_IMETHOD StartServerMode();
    NS_IMETHOD OnLastWindowClosing();
    NS_IMETHOD SetIsServerMode( PRBool isServerMode );
    NS_IMETHOD EnsureProfile(nsICmdLineService* args);

    // The "old" Start method (renamed).
    NS_IMETHOD StartDDE();

    // Utility function to handle a Win32-specific command line
    // option: "-console", which dynamically creates a Windows
    // console.
    // On OS/2, we use the return from CheckConsole to determine
    // whether or not to use the OS/2 specific turbo mode
    PRBool CheckConsole();

private:
    static HDDEDATA APIENTRY HandleDDENotification( ULONG    idInst,
                                                    USHORT   uType,
                                                    USHORT   uFmt,
                                                    HCONV    hconv,
                                                    HSZ      hsz1,
                                                    HSZ      hsz2,
                                                    HDDEDATA hdata,
                                                    ULONG    dwData1,
                                                    ULONG    dwData2 );
    static void HandleRequest( LPBYTE request, PRBool newWindow = PR_TRUE );
    static void ParseDDEArg( HSZ args, int index, nsCString& string);
    static void ParseDDEArg( const char* args, int index, nsCString& aString);
    static void ActivateLastWindow();
    static HDDEDATA CreateDDEData( DWORD value );
    static HDDEDATA CreateDDEData( LPBYTE value, DWORD len );
    static PRBool   InitTopicStrings();
    static int      FindTopic( HSZ topic );
    static nsresult GetCmdLineArgs( LPBYTE request, nsICmdLineService **aResult );
    static nsresult OpenWindow( const char *urlstr, const char *args );
    static nsresult OpenBrowserWindow( const char *args, PRBool newWindow = PR_TRUE );
    static nsresult ReParent( nsISupports *window, HWND newParent );
    static nsresult GetStartupURL(nsICmdLineService *args, nsCString& taskURL);


    static int   mConversations;
    enum {
        topicOpenURL,
        topicActivate,
        topicCancelProgress,
        topicVersion,
        topicRegisterViewer,
        topicUnRegisterViewer,
        topicGetWindowInfo,
        // Note: Insert new values above this line!!!!!
        topicCount // Count of the number of real topics
    };

    static HSZ   mApplication, mTopics[ topicCount ];
    static DWORD mInstance;
    static char *mAppName;
    static PRBool mInitialWindowActive;
    static PRBool mForceProfileStartup;
    static char mMutexName[];
    static PRBool mUseDDE;
    friend struct MessageWindow;
}; // nsNativeAppSupportOS2

nsSplashScreenOS2::nsSplashScreenOS2()
    : mDlg( 0 ), mBitmap( 0 ), mRefCnt( 0 ),
      hdcMemory( 0 ), hpsMemory( 0 ), mBitmapCX(0), mBitmapCY(0) {
}

nsSplashScreenOS2::~nsSplashScreenOS2() {
#if MOZ_DEBUG_DDE
    printf( "splash screen dtor called\n" );
#endif
    // Make sure dialog is gone.
    Hide();
}

NS_IMETHODIMP
nsSplashScreenOS2::Show() {
    //Spawn new thread to display real splash screen.
    _beginthread( ThreadProc, NULL, 16384, (void *)this );
    return NS_OK;
}

NS_IMETHODIMP
nsSplashScreenOS2::Hide() {
    if ( mDlg ) {
        // Dismiss the dialog.
        WinPostMsg(mDlg, WM_CLOSE, 0, 0);
        mDlg = 0;
        GpiSetBitmap(hpsMemory, NULLHANDLE);
        if (mBitmap) {
            GpiDeleteBitmap(mBitmap);
            mBitmap = 0;
        }
        if (hdcMemory) {
            DevCloseDC(hdcMemory);
            hdcMemory = 0;
        }
        if (hpsMemory) {
           GpiDestroyPS(hpsMemory);
           hpsMemory = 0;
        }
    }
    return NS_OK;
}

HBITMAP LoadAndSetBitmapFromFile(HPS hps, PSZ pszFilename)
{
   FILE *fp = fopen(pszFilename, "rb");
   if (fp == NULL) {
      return NULLHANDLE;
   }
   fseek(fp, 0, SEEK_END );
   ULONG cbFile = ftell(fp);
   if (cbFile ==0) {
      fclose(fp);
      return NULLHANDLE;
   }
   fseek(fp, 0, SEEK_SET );
   PBYTE pBitmapData = (PBYTE)malloc(cbFile);
   fread((PVOID)pBitmapData, cbFile, 1, fp);
   fclose(fp);

   PBITMAPFILEHEADER2 pbfh2 = (PBITMAPFILEHEADER2)pBitmapData;
   PBITMAPINFOHEADER2 pbmp2 = NULL;

   switch (pbfh2->usType)
   {
      case BFT_BITMAPARRAY:
         /*
          *   If this is a Bitmap-Array, adjust pointer to the normal
          *   file header.  We'll just use the first bitmap in the
          *   array and ignore other device forms.
          */
         pbfh2 = &(((PBITMAPARRAYFILEHEADER2) pBitmapData)->bfh2);
         pbmp2 = &pbfh2->bmp2;
         break;
      case BFT_BMAP:
         pbmp2 = &pbfh2->bmp2;
         break;
      case BFT_ICON:
      case BFT_POINTER:
      case BFT_COLORICON:
      case BFT_COLORPOINTER:
      default:
         break;
   }
    
   if (pbmp2 == NULL) {
      free(pBitmapData);
      return NULLHANDLE;
   }

   LONG lScans;
   if (pbmp2->cbFix == sizeof(BITMAPINFOHEADER))
      lScans = (LONG) ((PBITMAPINFOHEADER)pbmp2)->cy;
   else
      lScans = pbmp2->cy;

   HBITMAP hbmp = GpiCreateBitmap(hps, pbmp2, 0L, NULL, NULL);
   if (!hbmp) {
      free(pBitmapData);
      return NULLHANDLE;
   }

   if (GpiSetBitmap(hps, hbmp) == HBM_ERROR) {
      GpiDeleteBitmap(hbmp);
      free(pBitmapData);
      return NULLHANDLE;
   }

   LONG lScansSet = GpiSetBitmapBits(hps, 0L, lScans, pBitmapData + pbfh2->offBits,
                                     (PBITMAPINFO2) pbmp2);
   free(pBitmapData);

   if (lScansSet != lScans) {
      GpiSetBitmap(hps, NULLHANDLE);
      GpiDeleteBitmap(hbmp);
      return NULLHANDLE;
   }

   return hbmp;
}

void
nsSplashScreenOS2::LoadBitmap() {
    hdcMemory = DevOpenDC((HAB)0, OD_MEMORY, "*", 0L, NULL, 0L);
    SIZEL sizel = {0, 0};
    hpsMemory = GpiCreatePS((HAB)0, hdcMemory, &sizel,
                            PU_PELS | GPIF_DEFAULT | GPIT_MICRO | GPIA_ASSOC );

    // Check for '<program-name>.bmp" in same directory as executable.
    PPIB ppib;
    PTIB ptib;
    char fileName[CCHMAXPATH];
    DosGetInfoBlocks( &ptib, &ppib);
    DosQueryModuleName( ppib->pib_hmte, CCHMAXPATH, fileName);
    int fileNameLen = strlen(fileName);
    if (fileNameLen >=3) {
        fileName[ fileNameLen - 3 ] = 0;
        strcat( fileName, "bmp" );
        // Try to load bitmap from that file.
        mBitmap = LoadAndSetBitmapFromFile(hpsMemory, fileName);
    }
    if (!mBitmap) {
        mBitmap = GpiLoadBitmap(hpsMemory, NULL, IDB_SPLASH, 0L, 0L);
        GpiSetBitmap(hpsMemory, mBitmap);
    }
    BITMAPINFOHEADER bitmap;
    bitmap.cbFix = sizeof(BITMAPINFOHEADER);
    GpiQueryBitmapParameters(mBitmap, &bitmap);
    mBitmapCX = bitmap.cx;
    mBitmapCY = bitmap.cy;
}

MRESULT EXPENTRY DialogProc( HWND dlg, ULONG msg, MPARAM mp1, MPARAM mp2 ) {
    if ( msg == WM_INITDLG ) {
        // Store dialog handle.
        nsSplashScreenOS2 *splashScreen = (nsSplashScreenOS2*)mp2;
        if ( mp2 ) {
            splashScreen->SetDialog( dlg );

            // Try to load customized bitmap.
            splashScreen->LoadBitmap();
        }

        /* Size and center the splash screen correctly. The flags in the 
         * dialog template do not do the right thing if the user's 
         * machine is using large fonts.
         */ 
        HBITMAP hbitmap = splashScreen->mBitmap;
        if ( hbitmap ) {
            WinSetWindowPos( dlg,
                             HWND_TOP,
                             WinQuerySysValue( HWND_DESKTOP, SV_CXSCREEN )/2 - splashScreen->mBitmapCX/2,
                             WinQuerySysValue( HWND_DESKTOP, SV_CYSCREEN )/2 - splashScreen->mBitmapCY/2,
                             splashScreen->mBitmapCX,
                             splashScreen->mBitmapCY,
                             SWP_ACTIVATE | SWP_MOVE | SWP_SIZE );
            WinShowWindow( dlg, TRUE );
        }
        return (MRESULT)FALSE;
    }
    else if ( msg == WM_PAINT ) {
        nsSplashScreenOS2 *splashScreen = (nsSplashScreenOS2*)WinQueryWindowPtr( dlg, QWL_USER );
        HPS hps = WinBeginPaint (dlg, NULLHANDLE, NULL);
#if 0
        nsPaletteOS2::SelectGlobalPalette(hps, dlg);
#endif
        GpiErase (hps);
        POINTL aptl[8] = {{0, 0}, {splashScreen->mBitmapCX, splashScreen->mBitmapCY},
                          {0, 0}, {0, 0},
                          {0, 0}, {0, 0},
                          {0, 0}, {0, 0}};

        GpiBitBlt( hps, splashScreen->hpsMemory, 3L, aptl, ROP_SRCCOPY, 0L );
        WinEndPaint( hps );
        return (MRESULT)TRUE;
    }
#if 0
    else if ( msg == WM_REALIZEPALETTE ) {
        HPS hps = WinGetPS(dlg);
        nsPaletteOS2::SelectGlobalPalette(hps, dlg);
        WinReleasePS(hps);
        WinInvalidateRect( dlg, 0, TRUE);
        return (MRESULT)TRUE;
    }
#endif
    return WinDefDlgProc (dlg, msg, mp1, mp2);
}

void nsSplashScreenOS2::SetDialog( HWND dlg ) {
    // Save dialog handle.
    mDlg = dlg;
    // Store this pointer in the dialog.
    WinSetWindowPtr( mDlg, QWL_USER, this );
}

nsSplashScreenOS2 *nsSplashScreenOS2::GetPointer( HWND dlg ) {
    // Get result from dialog user data.
    PVOID data = WinQueryWindowPtr( dlg, QWL_USER );
    return (nsSplashScreenOS2*)data;
}

void ThreadProc(void *splashScreen) {
    HAB hab = WinInitialize( 0 );
    HMQ hmq = WinCreateMsgQueue( hab, 0 );
    WinDlgBox( HWND_DESKTOP, HWND_DESKTOP, (PFNWP)DialogProc, NULLHANDLE, IDD_SPLASH, (MPARAM)splashScreen );
    WinDestroyMsgQueue( hmq );
    WinTerminate( hab );
//    _endthread();
}

#define TURBOD "mozturbo.exe"

PRBool gAbortServer = PR_FALSE;

PRBool
nsNativeAppSupportOS2::CheckConsole() {
    CHAR pszAppPath[CCHMAXPATH];
    PPIB ppib;
    PTIB ptib;
    DosGetInfoBlocks(&ptib, &ppib);
    DosQueryModuleName(ppib->pib_hmte, CCHMAXPATH, pszAppPath);
    *strrchr(pszAppPath, '\\') = '\0'; // XXX DBCS misery

    for ( int i = 1; i < __argc; i++ ) {
        if ( strcmp( "-console", __argv[i] ) == 0
             ||
             strcmp( "/console", __argv[i] ) == 0 ) {
            /* Figure out some magic way to create a console on OS/2 */
        } else if ( strcmp( "-turbo", __argv[i] ) == 0
                    ||
                    strcmp( "/turbo", __argv[i] ) == 0
                    ||
                    strcmp( "-server", __argv[i] ) == 0                                              
                    ||
                    strcmp( "/server", __argv[i] ) == 0 ) {         

            struct stat st;
            CHAR pszTurboPath[CCHMAXPATH];

            strcpy(pszTurboPath, pszAppPath);
            strcat(pszTurboPath, "\\");
            strcat(pszTurboPath, TURBOD);
            int statrv = stat(pszTurboPath, &st);

            /* If we can't find the turbo EXE, use the Mozilla turbo */
            if (statrv == 0) {
              RESULTCODES rcodes;
              CHAR pszArgString[CCHMAXPATH];

              strcpy(pszArgString, pszTurboPath);
              strcat(pszArgString, " -l -p ");
              strcat(pszArgString, pszAppPath);
              pszArgString[strlen(pszTurboPath)] = '\0';
       
              DosExecPgm(NULL,0,EXEC_BACKGROUND,
                         pszArgString,
                         0, &rcodes,
                         pszTurboPath);
              return PR_FALSE; /* Don't start the app */
            } else {
              // Start in server mode (and suppress splash screen).   
              mServerMode = PR_TRUE;
              mShouldShowUI = PR_FALSE;
              __argv[i] = "-nosplash"; // Bit of a hack, but it works!
              // Ignore other args.
            }
        }
    }

    for ( int j = 1; j < __argc; j++ ) {
        if (strcmp("-killAll", __argv[j]) == 0 || strcmp("/killAll", __argv[j]) == 0 ||
            strcmp("-kill", __argv[j]) == 0 || strcmp("/kill", __argv[j]) == 0) {

            struct stat st;
            CHAR pszTurboPath[CCHMAXPATH];

            strcpy(pszTurboPath, pszAppPath);
            strcat(pszTurboPath, "\\");
            strcat(pszTurboPath, TURBOD);
            int statrv = stat(pszTurboPath, &st);

            /* If we can't find the turbo EXE, use the Mozilla turbo */
            if (statrv == 0) {
              RESULTCODES rcodes;
              CHAR pszArgString[CCHMAXPATH];

              strcpy(pszArgString, pszTurboPath);
              strcat(pszArgString, " -u");
              pszArgString[strlen(pszTurboPath)] = '\0';
             
              DosExecPgm(NULL,0,EXEC_BACKGROUND,
                         pszArgString,
                         0, &rcodes,
                         pszTurboPath);
              return PR_FALSE; /* Don't start the app */
            } else {
              gAbortServer = PR_TRUE;
            }
            break;
        }
    }

    return PR_TRUE; /* Start the app */
}


// Create and return an instance of class nsNativeAppSupportOS2.
nsresult
NS_CreateNativeAppSupport( nsINativeAppSupport **aResult ) {
    if ( aResult ) {
        nsNativeAppSupportOS2 *pNative = new nsNativeAppSupportOS2;
        if ( pNative ) {                                           
            // Check for dynamic console creation request.         
            // If CheckConsole returns PR_FALSE, we should
            // start the turbo daemon and close the app.
            if (pNative->CheckConsole() == PR_FALSE) {
               delete pNative;
               return NS_ERROR_FAILURE;
            }
            *aResult = pNative;                                    
            NS_ADDREF( *aResult );                                 
        } else {
            return NS_ERROR_OUT_OF_MEMORY;
        }
    } else {
        return NS_ERROR_NULL_POINTER;
    }

    return NS_OK;
}

// Create instance of OS/2 splash screen object.
nsresult
NS_CreateSplashScreen( nsISplashScreen **aResult ) {
    /* In order to handle -splash on the command line, */
    /* we use a variable to handle splash. Defaults to true. */
    /* We set it to false if you have turned off the logo */
    /* in OS/2, but then back to true if you specify -splash. */
    BOOL doSplashScreen = TRUE;
    if ( aResult ) {
        *aResult = 0;
        CHAR pBuffer[3];
        PrfQueryProfileString( HINI_USERPROFILE, "PM_ControlPanel", "LogoDisplayTime", "1", pBuffer, 3);
        if (pBuffer[0] == '0') {
          doSplashScreen = FALSE;
        } /* endif */
        for ( int i = 1; i < __argc; i++ ) {
            if ( strcmp( "-quiet", __argv[i] ) == 0
                 ||
                 strcmp( "/quiet", __argv[i] ) == 0 ) {
                 doSplashScreen = FALSE;
            }
            if ( strcmp( "-splash", __argv[i] ) == 0
                 ||
                 strcmp( "/splash", __argv[i] ) == 0 ) {
                 doSplashScreen = TRUE;
            }
        }
        if (!doSplashScreen) {
          return NS_OK;
        }
        *aResult = new nsSplashScreenOS2;
        if ( *aResult ) {
            NS_ADDREF( *aResult );
        } else {
            return NS_ERROR_OUT_OF_MEMORY;
        }
    } else {
        return NS_ERROR_NULL_POINTER;
    }

    return NS_OK;
}

// Constants
#define MOZ_DDE_APPLICATION    "Mozilla"
#define MOZ_STARTUP_MUTEX_NAME "StartupMutex"
#define MOZ_DDE_START_TIMEOUT 30000
#define MOZ_DDE_STOP_TIMEOUT  15000
#define MOZ_DDE_EXEC_TIMEOUT  15000

// The array entries must match the enum ordering!
const char * const topicNames[] = { "WWW_OpenURL",
                                    "WWW_Activate",
                                    "WWW_CancelProgress",
                                    "WWW_Version",
                                    "WWW_RegisterViewer",
                                    "WWW_UnRegisterViewer",
                                    "WWW_GetWindowInfo" };

// Static member definitions.
int   nsNativeAppSupportOS2::mConversations = 0;
HSZ   nsNativeAppSupportOS2::mApplication   = 0;
HSZ   nsNativeAppSupportOS2::mTopics[nsNativeAppSupportOS2::topicCount] = { 0 };
DWORD nsNativeAppSupportOS2::mInstance      = 0;
PRBool nsNativeAppSupportOS2::mInitialWindowActive = PR_FALSE;
PRBool nsNativeAppSupportOS2::mForceProfileStartup = PR_FALSE;


// Added this as pmddeml has no api like this
int DdeCmpStringHandles( HSZ hsz1, HSZ hsz2 )
{
  char chhsz1[CCHMAXPATH], chhsz2[CCHMAXPATH];
  int rc = -1;

  /* I am assuming that the strings will never be more that CCHMAXPATH in
   * length.  Safe bet (for now).  To find true length, call WinDdeQueryString
   * and pass in (hsz, NULL, 0L, 0) and it will return iLength.  Passing 0
   * for codepage will use the codepage of the current thread.
   */
  WinDdeQueryString( hsz1, chhsz1, sizeof( chhsz1 ), 0 );
  WinDdeQueryString( hsz2, chhsz2, sizeof( chhsz2 ),0 );

  rc = stricmp( chhsz1, chhsz2 );

  return(rc);
}


char *GetCommandLine()
{
   /* This function is meant to be like the Window's GetCommandLine() function.
    * The value returned by pPIB->pib_pchcmd is of the format:
    * <executable>\0<command line parameters>.  So the first string is the
    * .exe and the second string is what followed on the command line.  Dorky,
    * but I guess it'll have to do.
    */
   PTIB pTIB = NULL;
   PPIB pPIB = NULL;
   APIRET rc = NO_ERROR;
   char *pchParam = NULL;

   rc = DosGetInfoBlocks( &pTIB, &pPIB );
   if( rc == NO_ERROR )
   {
      INT iLen = 0;
      char *pchTemp = NULL;
      pchParam = pPIB->pib_pchcmd;
      strcpy( szCommandLine, pchParam );
      iLen = strlen( pchParam );

      /* szCommandLine[iLen] is '\0', so see what's next.  Probably be another
       * '\0', a space or start of the arguments
       */
      pchTemp = &(pchParam[iLen+1]);

      /* At this point, szCommandLine holds just the program name.  Now we
       * go for the parameters.  If our next value is a space, ignore it
       * and go for the next character
       */
      if( *pchTemp )
      {
         szCommandLine[iLen] = ' ';
         iLen++;
         if( *pchTemp == ' ' )
         {
            pchTemp++;
         }
         strcpy( &(szCommandLine[iLen]), pchTemp );
      }

   }

   return( szCommandLine );
}

typedef struct _DDEMLFN
{
   PFN   *fn;
   ULONG ord; 
} DDEMLFN, *PDDEMLFN;

DDEMLFN ddemlfnTable[] = 
{
   { (PFN *)&WinDdeAbandonTransaction   ,100 },
   { (PFN *)&WinDdeAccessData           ,101 },
   { (PFN *)&WinDdeAddData              ,102 },
   { (PFN *)&WinDdeSubmitTransaction    ,103 },
   { (PFN *)&WinDdeCompareStringHandles ,104 },
   { (PFN *)&WinDdeConnect              ,105 },
   { (PFN *)&WinDdeConnectList          ,106 },
   { (PFN *)&WinDdeCreateDataHandle     ,107 },
   { (PFN *)&WinDdeCreateStringHandle   ,108 },
   { (PFN *)&WinDdeDisconnect           ,109 },
   { (PFN *)&WinDdeDisconnectList       ,110 },
   { (PFN *)&WinDdeEnableCallback       ,111 },
   { (PFN *)&WinDdeFreeDataHandle       ,112 },
   { (PFN *)&WinDdeFreeStringHandle     ,113 },
   { (PFN *)&WinDdeGetData              ,114 },
   { (PFN *)&WinDdeInitialize           ,116 },
   { (PFN *)&WinDdeKeepStringHandle     ,117 },
   { (PFN *)&WinDdeNameService          ,118 },
   { (PFN *)&WinDdePostAdvise           ,119 },
   { (PFN *)&WinDdeQueryConvInfo        ,120 },
   { (PFN *)&WinDdeQueryNextServer      ,121 },
   { (PFN *)&WinDdeQueryString          ,122 },
   { (PFN *)&WinDdeReconnect            ,123 },
   { (PFN *)&WinDdeSetUserHandle        ,124 },
   { (PFN *)&WinDdeUninitialize         ,126 },
   { (PFN *)NULL                           ,  0 }
};

/* SetupOS2ddeml makes sure that we can get pointers to all of the DDEML 
 * functions in demlfnTable using entrypoints.  If we can't find one of them
 * or can't load pmddeml.dll, then returns FALSE
 */
BOOL SetupOS2ddeml()
{
    BOOL bRC = FALSE;
    HMODULE hmodDDEML = NULLHANDLE;
    APIRET rc = NO_ERROR;

    rc = DosLoadModule( NULL, 0, "PMDDEML", &hmodDDEML );
    if( rc == NO_ERROR )
    {
       int i;
       /* all of this had better work.  Get ready to be a success! */
       bRC = TRUE;
       for( i=0; ddemlfnTable[i].ord != 0; i++ )
       {
          rc = DosQueryProcAddr( hmodDDEML, ddemlfnTable[i].ord, NULL,
                                 ddemlfnTable[i].fn );
          if( rc != NO_ERROR )
          {
             /* we're horked.  Return rc = horked */
             bRC = FALSE;
             break;
          }
       }
    } /* load PMDDEML */

    return( bRC );
}

char nsNativeAppSupportOS2::mMutexName[ 128 ] = { 0 };


// Message window encapsulation.
struct MessageWindow {
    // ctor/dtor are simplistic
    MessageWindow() {
        // Try to find window.
        HATOMTBL  hatomtbl;
        HENUM     henum;
        HWND      hwndNext;
        char      classname[CCHMAXPATH];

        mHandle = NULLHANDLE;

        hatomtbl = WinQuerySystemAtomTable();
        mMsgWindowAtom = WinFindAtom(hatomtbl, className());
        if (mMsgWindowAtom == 0)
        {
          // If there is not atom in the system table for this class name, then
          // we can assume that the app is not currently running.
          mMsgWindowAtom = WinAddAtom(hatomtbl, className());
        } else {
          // Found an existing atom for this class name.  Cycle through existing
          // windows and see if one with our window id and class name already 
          // exists
          henum = WinBeginEnumWindows(HWND_OBJECT);
          while ((hwndNext = WinGetNextWindow(henum)) != NULLHANDLE)
          {
            if (WinQueryWindowUShort(hwndNext, QWS_ID) == (USHORT)mMsgWindowAtom)
            {
              WinQueryClassName(hwndNext, CCHMAXPATH, classname);
              if (strcmp(classname, className()) == 0)
              {
                mHandle = hwndNext;
                break;
              }
            }
          }
        }
    }

    HWND getHWND() {
        return mHandle;
    }

    // Class name: appName + "MessageWindow"
    static const char *className() {
        static char classNameBuffer[128];
        static char *mClassName = 0;
        if ( !mClassName ) { 
            sprintf( classNameBuffer,
                         "%s%s",
                         nsNativeAppSupportOS2::mAppName,
                         "MessageWindow" );
            mClassName = classNameBuffer;
        }
        return mClassName;
    }

    // Create: Register class and create window.
    NS_IMETHOD Create() {

        // Register the window class.
        NS_ENSURE_TRUE( WinRegisterClass( 0, className(), 
                                          (PFNWP)&MessageWindow::WindowProc, 
                                          0L, 0 ), 
                        NS_ERROR_FAILURE );

        /* Giving a size but offscreen so that won't be seen, even if all
         * goes wrong.  Giving a size so that can be seen and understood by
         * tools
         */
        const char * pszClassName = className();
        mHandle = WinCreateWindow( HWND_OBJECT,
                                   pszClassName,
                                   NULL,        // name
                                   WS_DISABLED, // style
                                   0,0,     // x, y
                                   0,0,       // cx,cy
                                   HWND_DESKTOP,// owner
                                   HWND_BOTTOM,  // hwndbehind
                                   (USHORT)mMsgWindowAtom, // id
                                   NULL,        // pCtlData
                                   NULL );      // pres params

#if MOZ_DEBUG_DDE
        printf( "Message window = 0x%08X\n", (int)mHandle );
#endif

        return NS_OK;
    }

    // Destory:  Get rid of window and reset mHandle.
    NS_IMETHOD Destroy() {
        nsresult retval = NS_OK;

        if ( mHandle ) {
           HATOMTBL hatomtbl = WinQuerySystemAtomTable();
           WinDeleteAtom(hatomtbl, mMsgWindowAtom);
           
            // DestroyWindow can only destroy windows created from
            //  the same thread.
            BOOL desRes = WinDestroyWindow( mHandle );
            if ( FALSE != desRes ) {
                mHandle = NULL;
            }
            else {
                retval = NS_ERROR_FAILURE;
            }
        }

        return retval;
    }

    // SendRequest: Pass string via WM_COPYDATA to message window.
    NS_IMETHOD SendRequest( const char *cmd ) {
        /* Nothing like WM_COPYDATA in OS/2, where the OS allows pointers to be
         * passed to a different process and automatically accessible by that
         * process.  So we have to create shared mem on our side and then the
         * process that gets the WM_COPYDATA message has to do a 
         * DosGetSharedMem on this pointer to be able to access the data
         */

        COPYDATASTRUCT *pcds;
        APIRET rc = NO_ERROR;
        PVOID pvData = NULL;
        ULONG ulSize = sizeof(COPYDATASTRUCT)+strlen(cmd)+1;
        rc = DosAllocSharedMem( &pvData, NULL, ulSize,
                                (PAG_COMMIT|PAG_READ|PAG_WRITE|OBJ_GETTABLE) );

        if( rc != NO_ERROR )
        {
           /* don't even try doing anything else.  Windows doesn't worry about
            * errors so I guess that we shouldn't either
            */
           return NS_OK;
        }

        memset( pvData, '\0', ulSize );
        pcds = (COPYDATASTRUCT *)(pvData);
        pcds->dwData = 0;
        pcds->cbData = strlen(cmd)+1;
        /* put the data in the buffer space immediately after the 
         * COPYDATASTRUCT
         */
        pcds->lpData = &(pcds->chBuff);
        if( cmd )
        {
           strcpy( (char *)pcds->lpData, cmd );
        }
        WinSendMsg( mHandle, WM_COPYDATA, 0, (MPARAM)pcds );
        DosFreeMem( pvData );

        return NS_OK;
    }

    // Window proc.
    static MRESULT EXPENTRY WindowProc( HWND msgWindow, ULONG msg, MPARAM wp, 
                                        MPARAM lp )
    {
        MRESULT rc = (MRESULT)TRUE;

        if ( msg == WM_COPYDATA ) {
            // This is an incoming request.
            COPYDATASTRUCT *cds = (COPYDATASTRUCT*)lp;
            DosGetSharedMem( (PVOID)cds, PAG_READ|PAG_WRITE );
#if MOZ_DEBUG_DDE
            printf( "Incoming request: %s\n", (const char*)cds->lpData );
#endif
            (void)nsNativeAppSupportOS2::HandleRequest( (LPBYTE)cds->lpData );
 }

    /* We have to return a FALSE from WM_CREATE or this window will never
     * get off of the ground
     */
    else if ( msg == WM_CREATE ) {
        rc = (MRESULT)FALSE;
    }

    return rc;
}

private:
    HWND     mHandle;
    USHORT   mMsgWindowAtom;
}; // struct MessageWindow

static char nameBuffer[128] = { 0 };
char *nsNativeAppSupportOS2::mAppName = nameBuffer;
PRBool nsNativeAppSupportOS2::mUseDDE = PR_FALSE;

/* Start: Tries to find the "message window" to determine if it
 *        exists.  If so, then Mozilla is already running.  In that
 *        case, we use the handle to the "message" window and send
 *        a request corresponding to this process's command line
 *        options.
 *        
 *        If not, then this is the first instance of Mozilla.  In
 *        that case, we create and set up the message window.
 *
 *        The checking for existance of the message window must
 *        be protected by use of a mutex semaphore.
 */
NS_IMETHODIMP
nsNativeAppSupportOS2::Start( PRBool *aResult ) {
    NS_ENSURE_ARG( aResult );
    NS_ENSURE_TRUE( mInstance == 0, NS_ERROR_NOT_INITIALIZED );

    if (getenv("MOZ_NO_REMOTE"))
    {
        *aResult = PR_TRUE;
        return NS_OK;
    }

    nsresult rv = NS_ERROR_FAILURE;
    *aResult = PR_FALSE;

    for ( int i = 1; i < __argc; i++ ) {
        if ( strcmp( "-dde", __argv[i] ) == 0 ||
             strcmp( "/dde", __argv[i] ) == 0 ) {
            mUseDDE = PR_TRUE;
        }
    }

    // Grab mutex first.
    int retval;
    UINT id = ID_DDE_APPLICATION_NAME;
    retval = WinLoadString( NULLHANDLE, NULLHANDLE, id, sizeof(nameBuffer), nameBuffer );
    if ( retval == 0 ) {
        // No app name; just keep running.
        *aResult = PR_TRUE;
        return NS_OK;
    }

    // Build mutex name from app name.
    PR_snprintf( mMutexName, sizeof mMutexName, "%s%s", nameBuffer, MOZ_STARTUP_MUTEX_NAME );
    Mutex startupLock = Mutex( mMutexName );

    NS_ENSURE_TRUE( startupLock.Lock( MOZ_DDE_START_TIMEOUT ), NS_ERROR_FAILURE );

    /* We need to have a message queue to do the MessageWindow stuff (for both
     * Create() and SendRequest()).  If we don't have one, make it now.
     * If we are going to end up going away right after ::Start() returns,
     * then make sure to clean up the message queue.
     */
    MQINFO mqinfo;
    HAB hab = NULLHANDLE;
    HMQ hmqCurrent = WinQueryQueueInfo( HMQ_CURRENT, &mqinfo, 
                                        sizeof( MQINFO ) );
    if( !hmqCurrent )
    {
        /* Set our app to be a PM app before attempting Win calls */
        PPIB ppib;
        PTIB ptib;
        DosGetInfoBlocks(&ptib, &ppib);
        ppib->pib_ultype = 3;

        hab = WinInitialize( 0 );
        hmqCurrent = WinCreateMsgQueue( hab, 0 );
    }

    // Search for existing message window.
    MessageWindow msgWindow;
    if ( msgWindow.getHWND() ) {
        // We are a client process.  Pass request to message window.
        char *cmd = GetCommandLine();
        rv = msgWindow.SendRequest( cmd );
    } else {
        // We will be server.
        if (!gAbortServer) {
            rv = msgWindow.Create();
            if ( NS_SUCCEEDED( rv ) ) {
                if (mUseDDE) {
                    // Start up DDE server.
                    this->StartDDE();
                }
                // Tell caller to spin message loop.
                *aResult = PR_TRUE;
            }
        }
    }

    startupLock.Unlock();

    if( *aResult == PR_FALSE )
    {
        /* This process isn't going to continue much longer.  Make sure that we
         * clean up the message queue
         */
        if (hmqCurrent)
           WinDestroyMsgQueue(hmqCurrent);
        if (hab)
           WinTerminate(hab);
    }

    return rv;
}

PRBool
nsNativeAppSupportOS2::InitTopicStrings() {
    for ( int i = 0; i < topicCount; i++ ) {
        if ( !( mTopics[ i ] = WinDdeCreateStringHandle( (PSZ)topicNames[ i ], CP_WINANSI ) ) ) {
            return PR_FALSE;
        }
    }
    return PR_TRUE;
}

int
nsNativeAppSupportOS2::FindTopic( HSZ topic ) {
    for ( int i = 0; i < topicCount; i++ ) {
        if ( DdeCmpStringHandles( topic, mTopics[i] ) == 0 ) {
            return i;
        }
    }
    return -1;
}

// Start DDE server.
//
// This used to be the Start() method when we were using DDE as the
// primary IPC mechanism between secondary Mozilla processes and the
// initial "server" process.
//
// Now, it simply initializes the DDE server.  The caller must check
// that this process is to be the server, and, must acquire the DDE
// startup mutex semaphore prior to calling this routine.  See ::Start(),
// above.
NS_IMETHODIMP
nsNativeAppSupportOS2::StartDDE() {
    NS_ENSURE_TRUE( mInstance == 0, NS_ERROR_NOT_INITIALIZED );

    /* Get entrypoints for PMDDEML */
    BOOL bDDEML = SetupOS2ddeml();

    /* If we couldn't initialize DDEML, set mUSEDDE to PR_FALSE */
    /* so we don't do anything else DDE related */
    if (!bDDEML) {
       mUseDDE = PR_FALSE;
       return NS_OK;
    }

    // Initialize DDE.
    NS_ENSURE_TRUE( DDEERR_NO_ERROR == WinDdeInitialize( &mInstance,
                                                         nsNativeAppSupportOS2::HandleDDENotification,
                                                         APPCLASS_STANDARD,
                                                         0 ),
                    NS_ERROR_FAILURE );

    // Allocate DDE strings.
    NS_ENSURE_TRUE( ( mApplication = WinDdeCreateStringHandle( mAppName, CP_WINANSI ) ) && InitTopicStrings(),
                    NS_ERROR_FAILURE );

    // Next step is to register a DDE service.
    NS_ENSURE_TRUE( WinDdeNameService( mInstance, mApplication, 0, DNS_REGISTER ), NS_ERROR_FAILURE );

#if MOZ_DEBUG_DDE
    printf( "DDE server started\n" );
#endif

    return NS_OK;
}

// If no DDE conversations are pending, terminate DDE.
NS_IMETHODIMP
nsNativeAppSupportOS2::Stop( PRBool *aResult ) {
    NS_ENSURE_ARG( aResult );
    NS_ENSURE_TRUE( mInstance, NS_ERROR_NOT_INITIALIZED );

    nsresult rv = NS_OK;
    *aResult = PR_TRUE;

    if (!mUseDDE) {
       return rv;
    }

    Mutex ddeLock( mMutexName );

    if ( ddeLock.Lock( MOZ_DDE_STOP_TIMEOUT ) ) {
        if ( mConversations == 0 ) {
            this->Quit();
        } else {
            *aResult = PR_FALSE;
        }

        ddeLock.Unlock();
    }
    else {
        // No DDE application name specified, but that's OK.  Just
        // forge ahead.
        *aResult = PR_TRUE;
    }

    return rv;
}

// Terminate DDE regardless.
NS_IMETHODIMP
nsNativeAppSupportOS2::Quit() {
    // If another process wants to look for the message window, they need
    // to wait to hold the lock, in which case they will not find the
    // window as we will destroy ours under our lock.
    // When the mutex goes off the stack, it is unlocked via destructor.
    Mutex mutexLock(mMutexName);
    NS_ENSURE_TRUE(mutexLock.Lock(MOZ_DDE_START_TIMEOUT), NS_ERROR_FAILURE );

    // If we've got a message window to receive IPC or new window requests,
    // get rid of it as we are shutting down.
    // Note:  Destroy calls DestroyWindow, which will only work on a window
    //  created by the same thread.
    MessageWindow mw;
    mw.Destroy();

    if ( mInstance ) {
        // Unregister application name.
        WinDdeNameService( mInstance, mApplication, 0, DNS_UNREGISTER );
        // Clean up strings.
        if ( mApplication ) {
            WinDdeFreeStringHandle( mApplication );
            mApplication = 0;
        }
        for ( int i = 0; i < topicCount; i++ ) {
            if ( mTopics[i] ) {
                WinDdeFreeStringHandle( mTopics[i] );
                mTopics[i] = 0;
            }
        }
        WinDdeUninitialize( mInstance );
        mInstance = 0;
    }

    return NS_OK;
}

PRBool NS_CanRun()
{
      return PR_FALSE; /*  We do this so that we can bail if we are using custom turbo mode */
}

#if MOZ_DEBUG_DDE
// Macro to generate case statement for a given XTYP value.
#define XTYP_CASE(t) \
    case t: result = #t; break

static nsCString uTypeDesc( UINT uType ) {
    nsCString result;
    switch ( uType ) {
    XTYP_CASE(XTYP_ADVSTART);
    XTYP_CASE(XTYP_CONNECT);
    XTYP_CASE(XTYP_ADVREQ);
    XTYP_CASE(XTYP_REQUEST);
    XTYP_CASE(XTYP_WILDCONNECT);
    XTYP_CASE(XTYP_ADVDATA);
    XTYP_CASE(XTYP_EXECUTE);
    XTYP_CASE(XTYP_POKE);
    XTYP_CASE(XTYP_ADVSTOP);
    XTYP_CASE(XTYP_CONNECT_CONFIRM);
    XTYP_CASE(XTYP_DISCONNECT);
    XTYP_CASE(XTYP_ERROR);
    XTYP_CASE(XTYP_MONITOR);
    XTYP_CASE(XTYP_REGISTER);
    XTYP_CASE(XTYP_XACT_COMPLETE);
    XTYP_CASE(XTYP_UNREGISTER);
    default: result = "XTYP_?????";
    }
    return result;
}

static nsCString hszValue( DWORD instance, HSZ hsz ) {
    // Extract string from HSZ.
    nsCString result("[");
    DWORD len = WinDdeQueryString( hsz, NULL, NULL, CP_WINANSI );
    if ( len ) {
        char buffer[ 256 ];
        WinDdeQueryString( hsz, buffer, sizeof buffer, CP_WINANSI );
        result += buffer;
    }
    result += "]";
    return result;
}
#endif


// Utility function to escape double-quotes within a string.
static void escapeQuotes( nsString &aString ) {
    PRInt32 offset = -1;
    while( 1 ) {
       // Find next '"'.
       offset = aString.FindChar( '"', ++offset );
       if ( offset == kNotFound ) {
           // No more quotes, exit.
           break;
       } else {
           // Insert back-slash ahead of the '"'.
           aString.Insert( PRUnichar('\\'), offset );
           // Increment offset because we just inserted a slash
           offset++;
       }
    }
    return;
}

HDDEDATA APIENTRY
nsNativeAppSupportOS2::HandleDDENotification( ULONG idInst,     // DDEML instance
                                              USHORT uType,     // transaction type
                                              USHORT uFmt,      // clipboard data format
                                              HCONV hconv,      // handle to the conversation
                                              HSZ hsz1,         // handle to a string
                                              HSZ hsz2,         // handle to a string
                                              HDDEDATA hdata,   // handle to a global memory object
                                              ULONG dwData1,    // transaction-specific data
                                              ULONG dwData2 ) { // transaction-specific data

#if MOZ_DEBUG_DDE
    printf( "DDE: uType  =%s\n",      uTypeDesc( uType ).get() );
    printf( "     uFmt   =%u\n",      (unsigned)uFmt );
    printf( "     hconv  =%08x\n",    (int)hconv );
    printf( "     hsz1   =%08x:%s\n", (int)hsz1, hszValue( mInstance, hsz1 ).get() );
    printf( "     hsz2   =%08x:%s\n", (int)hsz2, hszValue( mInstance, hsz2 ).get() );
    printf( "     hdata  =%08x\n",    (int)hdata );
    printf( "     dwData1=%08x\n",    (int)dwData1 );
    printf( "     dwData2=%08x\n",    (int)dwData2 );
#endif

    HDDEDATA result = 0;
    if ( uType & XCLASS_BOOL ) {
        switch ( uType ) {
            case XTYP_CONNECT:
                // Make sure its for our service/topic.
                if ( FindTopic( hsz1 ) != -1 ) {
                    // We support this connection.
                    result = (HDDEDATA)1;
                }
                break;
            case XTYP_CONNECT_CONFIRM:
                // We don't care about the conversation handle, at this point.
                result = (HDDEDATA)1;
                break;
        }
    } else if ( uType & XCLASS_DATA ) {
        if ( uType == XTYP_REQUEST ) {
            switch ( FindTopic( hsz1 ) ) {
                case topicOpenURL: {
                    // Open a given URL...

                    // Default is to open in current window.
                    PRBool new_window = PR_FALSE;

                    // Get the URL from the first argument in the command.
                    nsCAutoString url;
                    ParseDDEArg(hsz2, 0, url);
                    // Read the 3rd argument in the command to determine if a
                    // new window is to be used.
                    nsCAutoString windowID;
                    ParseDDEArg(hsz2, 2, windowID);
                    // "0" means to open the URL in a new window.
                    if ( windowID.Equals( "0" ) ) {
                        new_window = PR_TRUE;
                    }

                    // Make it look like command line args.
                    url.Insert( "mozilla -url ", 0 );
#if MOZ_DEBUG_DDE
                    printf( "Handling dde XTYP_REQUEST request: [%s]...\n", url.get() );
#endif
                    // Now handle it.
                    HandleRequest( LPBYTE( url.get() ), new_window );
                    // Return pseudo window ID.
                    result = CreateDDEData( 1 );
                    break;
                }
                case topicGetWindowInfo: {
                    // This topic has to get the current URL, get the current
                    // page title and then format the output into the DDE
                    // return string.  The return value is "URL","Page Title",
                    // "Window ID" however the window ID is not used for this
                    // command, therefore it is returned as a null string

                    // This isn't really a loop.  We just use "break"
                    // statements to bypass the remaining steps when
                    // something goes wrong.
                    do {
                        // Get most recently used Nav window.
                        nsCOMPtr<nsIDOMWindowInternal> navWin;
                        GetMostRecentWindow( NS_LITERAL_STRING( "navigator:browser" ).get(),
                                             getter_AddRefs( navWin ) );
                        if ( !navWin ) {
                            // There is not a window open
                            break;
                        }
                        // Get content window.
                        nsCOMPtr<nsIDOMWindow> content;
                        navWin->GetContent( getter_AddRefs( content ) );
                        if ( !content ) {
                            break;
                        }
                        // Convert that to internal interface.
                        nsCOMPtr<nsIDOMWindowInternal> internalContent( do_QueryInterface( content ) );
                        if ( !internalContent ) {
                            break;
                        }
                        // Get location.
                        nsCOMPtr<nsIDOMLocation> location;
                        internalContent->GetLocation( getter_AddRefs( location ) );
                        if ( !location ) {
                            break;
                        }
                        // Get href for URL.
                        nsAutoString url;
                        if ( NS_FAILED( location->GetHref( url ) ) ) {
                            break;
                        }
                        // Escape any double-quotes.
                        escapeQuotes( url );

                        // Now for the title; first, get the "window" script global object.
                        nsCOMPtr<nsIScriptGlobalObject> scrGlobalObj( do_QueryInterface( internalContent ) );
                        if ( !scrGlobalObj ) {
                            break;
                        }
                        // Then from its doc shell get the base window...
                        nsCOMPtr<nsIBaseWindow> baseWindow =
                          do_QueryInterface( scrGlobalObj->GetDocShell() );
                        if ( !baseWindow ) {
                            break;
                        }
                        // And from the base window we can get the title.
                        nsXPIDLString title;
                        if(!baseWindow) {
                            break;
                        }
                        baseWindow->GetTitle(getter_Copies(title));
                        // Escape any double-quotes in the title.
                        escapeQuotes( title );

                        // Use a string buffer for the output data, first
                        // save a quote.
                        nsCAutoString   outpt( NS_LITERAL_CSTRING("\"") );
                        // Now copy the URL converting the Unicode string
                        // to a single-byte ASCII string
                        outpt.Append( NS_LossyConvertUCS2toASCII( url ) );
                        // Add the "," used to separate the URL and the page
                        // title
                        outpt.Append( NS_LITERAL_CSTRING("\",\"") );
                        // Now copy the current page title to the return string
                        outpt.Append( NS_LossyConvertUCS2toASCII( title ));
                        // Fill out the return string with the remainin ",""
                        outpt.Append( NS_LITERAL_CSTRING( "\",\"\"" ));

                        // Create a DDE handle to a char string for the data
                        // being returned, this copies and creates a "shared"
                        // copy of the DDE response until the calling APP
                        // reads it and says it can be freed.
                        result = CreateDDEData( (LPBYTE)(const char*)outpt.get(),
                                                outpt.Length() + 1 );
#if MOZ_DEBUG_DDE
                        printf( "WWW_GetWindowInfo->%s\n", outpt.get() );
#endif
                    } while ( PR_FALSE );
                    break;
                }
                case topicActivate: {
                    // Activate a Nav window...
                    nsCAutoString windowID;
                    ParseDDEArg(hsz2, 0, windowID);
                    // 4294967295 is decimal for 0xFFFFFFFF which is also a
                    //   correct value to do that Activate last window stuff
                    if ( windowID.Equals( "-1" ) ||
                         windowID.Equals( "4294967295" ) ) {
                        // We only support activating the most recent window (or a new one).
                        ActivateLastWindow();
                        // Return pseudo window ID.
                        result = CreateDDEData( 1 );
                    }
                    break;
                }
                case topicVersion: {
                    // Return version.  We're restarting at 1.0!
                    DWORD version = 1 << 16; // "1.0"
                    result = CreateDDEData( version );
                    break;
                }
                case topicRegisterViewer: {
                    // Register new viewer (not implemented).
                    result = CreateDDEData( PR_FALSE );
                    break;
                }
                case topicUnRegisterViewer: {
                    // Unregister new viewer (not implemented).
                    result = CreateDDEData( PR_FALSE );
                    break;
                }
                default:
                    break;
            }
        } else if ( uType & XTYP_POKE ) {
            switch ( FindTopic( hsz1 ) ) {
                case topicCancelProgress: {
                    // "Handle" progress cancel (actually, pretty much ignored).
                    result = (HDDEDATA)DDE_FACK;
                    break;
                }
                default:
                    break;
            }
        }
    } else if ( uType & XCLASS_FLAGS ) {
        if ( uType == XTYP_EXECUTE ) {
            // Prove that we received the request.
            DWORD bytes;
            LPBYTE request = (LPBYTE)WinDdeAccessData( hdata, &bytes );
#if MOZ_DEBUG_DDE
            printf( "Handling dde request: [%s]...\n", (char*)request );
#endif
            // Default is to open in current window.
            PRBool new_window = PR_FALSE;

            nsCAutoString url;
            ParseDDEArg((const char*) request, 0, url);

            // Read the 3rd argument in the command to determine if a
            // new window is to be used.
            nsCAutoString windowID;
            ParseDDEArg((const char*) request, 2, windowID);

            // "0" means to open the URL in a new window.
            if ( windowID.Equals( "0" ) ) {
                new_window = PR_TRUE;
            }

            // Make it look like command line args.
            url.Insert( "mozilla -url ", 0 );
#if MOZ_DEBUG_DDE
            printf( "Handling dde XTYP_REQUEST request: [%s]...\n", url.get() );
#endif
            // Now handle it.
            HandleRequest( LPBYTE( url.get() ), new_window );

            // Release the data.
//            DdeUnaccessData( hdata );
            result = (HDDEDATA)DDE_FACK;
        } else {
            result = (HDDEDATA)DDE_NOTPROCESSED;
        }
    } else if ( uType & XCLASS_NOTIFICATION ) {
    }
#if MOZ_DEBUG_DDE
    printf( "DDE result=%d (0x%08X)\n", (int)result, (int)result );
#endif
    return result;
}

// Utility function to advance to end of quoted string.
// p+offset must point to the comma preceding the arg on entry.
// On return, p+result points to the closing '"' (or end of the string
// if the closing '"' is missing) if the arg is quoted.  If the arg
// is not quoted, then p+result will point to the first character
// of the arg.
static PRInt32 advanceToEndOfQuotedArg( const char *p, PRInt32 offset, PRInt32 len ) {
    // Check whether the current arg is quoted.
    if ( p[++offset] == '"' ) {
        // Advance past the closing quote.
        while ( offset < len && p[++offset] != '"' ) {
            // If the current character is a backslash, then the
            // next character can't be a *real* '"', so skip it.
            if ( p[offset] == '\\' ) {
                offset++;
            }
        }
    }
    return offset;
}

void nsNativeAppSupportOS2::ParseDDEArg( const char* args, int index, nsCString& aString) {
    if ( args ) {
        int argLen = strlen(args);
        nsDependentCString temp(args, argLen);

        // offset points to the comma preceding the desired arg.
        PRInt32 offset = -1;
        // Skip commas till we get to the arg we want.
        while( index-- ) {
            // If this arg is quoted, then go to closing quote.
            offset = advanceToEndOfQuotedArg( args, offset, argLen);
            // Find next comma.
            offset = temp.FindChar( ',', offset );
            if ( offset == kNotFound ) {
                // No more commas, give up.
                aString = args;
                return;
            }
        }
        // The desired argument starts just past the preceding comma,
        // which offset points to, and extends until the following
        // comma (or the end of the string).
        //
        // Since the argument might be enclosed in quotes, we need to
        // deal with that before searching for the terminating comma.
        // We advance offset so it ends up pointing to the start of
        // the argument we want.
        PRInt32 end = advanceToEndOfQuotedArg( args, offset++, argLen );
        // Find next comma (or end of string).
        end = temp.FindChar( ',', end );
        if ( end == kNotFound ) {
            // Arg is the rest of the string.
            end = argLen;
        }
        // Extract result.
        aString.Assign( args + offset, end - offset );
    }
    return;
}

// Utility to parse out argument from a DDE item string.
void nsNativeAppSupportOS2::ParseDDEArg( HSZ args, int index, nsCString& aString) {
    DWORD argLen = WinDdeQueryString( args, NULL, NULL, CP_WINANSI );
    // there wasn't any string, so return empty string
    if ( !argLen ) return;
    // Ensure result's buffer is sufficiently big.
    char *temp = (char *) malloc(argLen + 1);
    if ( !temp ) return;
    // Now get the string contents.
    WinDdeQueryString( args, temp, argLen + 1, CP_WINANSI );
    // Parse out the given arg.
    ParseDDEArg(temp, index, aString);
    free(temp);
}

void nsNativeAppSupportOS2::ActivateLastWindow() {
    nsCOMPtr<nsIDOMWindowInternal> navWin;
    GetMostRecentWindow( NS_LITERAL_STRING("navigator:browser").get(), getter_AddRefs( navWin ) );
    if ( navWin ) {
        // Activate that window.
        activateWindow( navWin );
    } else {
        // Need to create a Navigator window, then.
        OpenBrowserWindow( "about:blank" );
    }
}

HDDEDATA nsNativeAppSupportOS2::CreateDDEData( DWORD value ) {
    return CreateDDEData( (LPBYTE)&value, sizeof value );
}

HDDEDATA nsNativeAppSupportOS2::CreateDDEData( LPBYTE value, DWORD len ) {
    HDDEDATA result = WinDdeCreateDataHandle( value,
                                              len,
                                              0,
                                              mApplication,
                                              CF_TEXT,
                                              0 );
    return result;
}

// Handle DDE request.  The argument is the command line received by the
// DDE client process.  We convert that string to an nsICmdLineService
// object via GetCmdLineArgs.  Then, we look for certain well-known cmd
// arguments.  This replicates code elsewhere, to some extent,
// unfortunately (if you can fix that, please do).
void
nsNativeAppSupportOS2::HandleRequest( LPBYTE request, PRBool newWindow ) {

    // if initial hidden window is still being displayed, we need to ignore requests
    // because such requests might not function properly.  See bug 147223 for details

    if (mInitialWindowActive) {
      return;
    }

    // Parse command line.

    nsCOMPtr<nsICmdLineService> args;
    nsresult rv;

    rv = GetCmdLineArgs( request, getter_AddRefs( args ) );
    if (NS_FAILED(rv)) return;

    nsCOMPtr<nsIAppStartup> appStartup(do_GetService(appStartup));
    if (!appStartup) return;

    nsCOMPtr<nsINativeAppSupport> nativeApp;
    rv = appStartup->GetNativeAppSupport(getter_AddRefs( nativeApp ));
    if (NS_FAILED(rv)) return;

    // first see if there is a url
    nsXPIDLCString arg;
    rv = args->GetURLToLoad(getter_Copies(arg));
    if (NS_SUCCEEDED(rv) && (const char*)arg ) {
      // Launch browser.
#if MOZ_DEBUG_DDE
      printf( "Launching browser on url [%s]...\n", (const char*)arg );
#endif
      if (NS_SUCCEEDED(nativeApp->EnsureProfile(args)))
        (void)OpenBrowserWindow( arg, newWindow );
      return;
    }


    // ok, let's try the -chrome argument
    rv = args->GetCmdLineValue("-chrome", getter_Copies(arg));
    if (NS_SUCCEEDED(rv) && (const char*)arg ) {
      // Launch chrome.
#if MOZ_DEBUG_DDE
      printf( "Launching chrome url [%s]...\n", (const char*)arg );
#endif
      if (NS_SUCCEEDED(nativeApp->EnsureProfile(args)))
        (void)OpenWindow( arg, "" );
      return;
    }

    // try for the "-profilemanager" argument, in which case we want the
    // profile manager to appear, but only if there are no windows open

    rv = args->GetCmdLineValue( "-profilemanager", getter_Copies(arg));
    if ( NS_SUCCEEDED(rv) && (const char*)arg ) { // -profilemanager on command line
      nsCOMPtr<nsIDOMWindowInternal> window;
      GetMostRecentWindow(0, getter_AddRefs(window));
      if (!window) { // there are no open windows
        mForceProfileStartup = PR_TRUE;
      }
    }

    // try for the "-kill" argument, to shut down the server
    rv = args->GetCmdLineValue( "-kill", getter_Copies(arg));
    if ( NS_SUCCEEDED(rv) && (const char*)arg ) {
      // Turn off server mode.
      nsCOMPtr<nsIAppStartup> appStartup
        (do_GetService(NS_APPSTARTUP_CONTRACTID));
      if (!appStartup) return;
      
      nsCOMPtr<nsINativeAppSupport> native;
      rv = appStartup->GetNativeAppSupport( getter_AddRefs( native ));
      if (NS_SUCCEEDED(rv)) {
        native->SetIsServerMode( PR_FALSE );

        // close app if there are no more top-level windows.
        appStartup->Quit(nsIAppShellService::eConsiderQuit);
      }

      return;
    }

    // Try standard startup's command-line handling logic from nsAppRunner.cpp...

    // Need profile before opening windows.
    rv = nativeApp->EnsureProfile(args);
    if (NS_FAILED(rv)) return;

    // This will tell us whether the command line processing opened a window.
    PRBool windowOpened = PR_FALSE;

    // If there are no command line arguments, then we want to open windows
    // based on startup prefs (which say to open navigator and/or mailnews
    // and/or composer), or, open just a Navigator window.  We do the former
    // if there are no open windows (i.e., we're in turbo mode), the latter
    // if there are open windows.  Note that we call DoCommandLines in the
    // case where there are no command line args but there are windows open
    // (i.e., with heedStartupPrefs==PR_FALSE) despite the fact that it may
    // not actually do anything in that case.  That way we're covered if the
    // logic in DoCommandLines changes.  Note that we cover this case below
    // by opening a navigator window if DoCommandLines doesn't open one.  We
    // have to cover that case anyway, because DoCommandLines won't open a
    // window when given "mozilla -foobar" or the like.
    PRBool heedStartupPrefs = PR_FALSE;
    PRInt32 argc = 0;
    args->GetArgc( &argc );
    if ( argc <= 1 ) {
        // Use startup prefs iff there are no windows currently open.
        nsCOMPtr<nsIDOMWindowInternal> win;
        GetMostRecentWindow( 0, getter_AddRefs( win ) );
        if ( !win ) {
            heedStartupPrefs = PR_TRUE;
        }
    }

    // Process command line options.
    rv = DoCommandLines( args, heedStartupPrefs, &windowOpened );

    // If a window was opened, then we're done.
    // Note that we keep on trying in the unlikely event of an error.
    if (rv == NS_ERROR_NOT_AVAILABLE || rv == NS_ERROR_ABORT || windowOpened) {
      return;
    }

    // ok, no idea what the param is.
#if MOZ_DEBUG_DDE
    printf( "Unknown request [%s]\n", (char*) request );
#endif
    // if all else fails, open a browser window
    const char * const contractID =
      "@mozilla.org/commandlinehandler/general-startup;1?type=browser";
    nsCOMPtr<nsICmdLineHandler> handler = do_GetService(contractID, &rv);
    if (NS_FAILED(rv)) return;

    nsXPIDLString defaultArgs;
    rv = handler->GetDefaultArgs(getter_Copies(defaultArgs));
    if (NS_FAILED(rv) || !defaultArgs) return;

    if (defaultArgs) {
      NS_LossyConvertUCS2toASCII url( defaultArgs );
      OpenBrowserWindow(url.get());
    } else {
      OpenBrowserWindow("about:blank");
    }
}

// Parse command line args according to MS spec
// (see "Parsing C++ Command-Line Arguments" at
// http://msdn.microsoft.com/library/devprods/vs6/visualc/vclang/_pluslang_parsing_c.2b2b_.command.2d.line_arguments.htm).
nsresult
nsNativeAppSupportOS2::GetCmdLineArgs( LPBYTE request, nsICmdLineService **aResult ) {
    nsresult rv = NS_OK;

    int justCounting = 1;
    char **argv = 0;
    // Flags, etc.
    int between = 1, quoted = 0, bSlashCount = 0;
    int argc = 0;
    char *p = (char*)request;
    nsCAutoString arg;
    // We loop if we've not finished the second pass through.
    while ( 1 ) {
        if ( between ) {
            // We are traversing whitespace between args.
            // Check for start of next arg.
            if (  *p != 0 && !isspace( *p ) ) {
                // Start of another arg.
                between = 0;
                arg = "";
                switch ( *p ) {
                    case '\\':
                        // Count the backslash.
                        bSlashCount = 1;
                        break;
                    case '"':
                        // Remember we're inside quotes.
                        quoted = 1;
                        break;
                    default:
                        // Add character to arg.
                        arg += *p;
                        break;
                }
            } else {
                // Another space between args, ignore it.
            }
        } else {
            // We are processing the contents of an argument.
            // Check for whitespace or end.
            if ( *p == 0 || ( !quoted && isspace( *p ) ) ) {
                // Process pending backslashes (interpret them 
                // literally since they're not followed by a ").
                while( bSlashCount ) {
                    arg += '\\';
                    bSlashCount--;
                }
                // End current arg.
                if ( !justCounting ) {
                    argv[argc] = new char[ arg.Length() + 1 ];
                    strcpy( argv[argc], arg.get() ); 
                }
                argc++;
                // We're now between args.
                between = 1;
            } else {
                // Still inside argument, process the character.
                switch ( *p ) {
                    case '"':
                        // First, digest preceding backslashes (if any).
                        while ( bSlashCount > 1 ) {
                            // Put one backsplash in arg for each pair.
                            arg += '\\';
                            bSlashCount -= 2;
                        }
                        if ( bSlashCount ) {
                            // Quote is literal.
                            arg += '"';
                            bSlashCount = 0;
                        } else {
                            // Quote starts or ends a quoted section.
                            if ( quoted ) {
                                // Check for special case of consecutive double
                                // quotes inside a quoted section.
                                if ( *(p+1) == '"' ) {
                                    // This implies a literal double-quote.  Fake that
                                    // out by causing next double-quote to look as
                                    // if it was preceded by a backslash.
                                    bSlashCount = 1;
                                } else {
                                    quoted = 0;
                                }
                            } else {
                                quoted = 1;
                            }
                        }
                        break;
                    case '\\':
                        // Add to count.
                        bSlashCount++;
                        break;
                    default:
                        // Accept any preceding backslashes literally.
                        while ( bSlashCount ) {
                            arg += '\\';
                            bSlashCount--;
                        }
                        // Just add next char to the current arg.
                        arg += *p;
                        break;
                }
            }
        }
        // Check for end of input.
        if ( *p ) {
            // Go to next character.
            p++;
        } else {
            // If on first pass, go on to second.
            if ( justCounting ) {
                // Allocate argv array.
                argv = new char*[ argc ];
    
                // Start second pass, initialize again
                justCounting = 0;
                p = (char*)request;
                between = 1;
                argc = quoted = bSlashCount = 0;
            } else {
                // Quit.
                break;
            }
        }
    }

    // OK, now create nsICmdLineService object from argc/argv.
    static NS_DEFINE_CID( kCmdLineServiceCID,    NS_COMMANDLINE_SERVICE_CID );

    nsCOMPtr<nsIComponentManager> compMgr;
    NS_GetComponentManager(getter_AddRefs(compMgr));
    rv = compMgr->CreateInstance( kCmdLineServiceCID,
                                  0,
                                  NS_GET_IID( nsICmdLineService ),
                                  (void**)aResult );

    if ( NS_FAILED( rv ) || NS_FAILED( ( rv = (*aResult)->Initialize( argc, argv ) ) ) ) {
#if MOZ_DEBUG_DDE
        printf( "Error creating command line service = 0x%08X (argc=%d, argv=0x%08X)\n", (int)rv, (int)argc, (int)argv );
#endif
    }

    // Cleanup.
    while ( argc ) {
        delete [] argv[ --argc ];
    }
    delete [] argv;

    return rv;
}

// Check to see if we have a profile. We will not have a profile
// at this point if we were launched invisibly in -turbo mode, and
// the profile mgr needed to show UI (to pick from multiple profiles).
// At this point, we can show UI, so call DoProfileStartUp().
nsresult
nsNativeAppSupportOS2::EnsureProfile(nsICmdLineService* args)
{
  nsresult rv;  

  nsCOMPtr<nsIProfileInternal> profileMgr(do_GetService(NS_PROFILE_CONTRACTID, &rv));
  if (NS_FAILED(rv)) return rv;
  nsCOMPtr<nsIAppStartup> appStartup(do_GetService(NS_APPSTARTUP_CONTRACTID, &rv));
  if (NS_FAILED(rv)) return rv;

  // If we have a profile, everything is fine.
  // unless mForceProfileStartup is TRUE. This flag is set when the
  // last window is closed in -turbo mode. When TRUE, it forces the
  // profile UI to come up at the beginning of the next -turbo session
  // even if we currently have a profile.
  PRBool haveProfile;
  rv = profileMgr->IsCurrentProfileAvailable(&haveProfile);
  if (!mForceProfileStartup && NS_SUCCEEDED(rv) && haveProfile)
      return NS_OK;
 
  // If the profile selection is happening, fail.
  PRBool doingProfileStartup;
  rv = profileMgr->GetIsStartingUp(&doingProfileStartup);
  if (NS_FAILED(rv) || doingProfileStartup) return NS_ERROR_FAILURE;

  // See if profile manager is being suppressed via -silent flag.
  PRBool canInteract = PR_TRUE;
  nsXPIDLCString arg;
  if (NS_SUCCEEDED(args->GetCmdLineValue("-silent", getter_Copies(arg)))) {
    if ((const char*)arg) {
      canInteract = PR_FALSE;
    }
  }
  rv = appStartup->DoProfileStartup(args, canInteract);

  mForceProfileStartup = PR_FALSE;

  return rv;
}

nsresult
nsNativeAppSupportOS2::OpenWindow( const char*urlstr, const char *args ) {

  nsresult rv = NS_ERROR_FAILURE;

  nsCOMPtr<nsIWindowWatcher> wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID));
  nsCOMPtr<nsISupportsCString> sarg(do_CreateInstance(NS_SUPPORTS_CSTRING_CONTRACTID));
  if (sarg)
    sarg->SetData(nsDependentCString(args));

  if (wwatch && sarg) {
    nsCOMPtr<nsIDOMWindow> newWindow;
    rv = wwatch->OpenWindow(0, urlstr, "_blank", "chrome,dialog=no,all",
                   sarg, getter_AddRefs(newWindow));
#if MOZ_DEBUG_DDE
  } else {
      printf("Get WindowWatcher (or create string) failed\n");
#endif
  }
  return rv;
}

HWND hwndForDOMWindow( nsISupports *window ) {
    nsCOMPtr<nsIScriptGlobalObject> ppScriptGlobalObj( do_QueryInterface(window) );
    if ( !ppScriptGlobalObj ) {
        return 0;
    }

    nsCOMPtr<nsIBaseWindow> ppBaseWindow =
      do_QueryInterface( ppScriptGlobalObj->GetDocShell() );
    if ( !ppBaseWindow ) {
        return 0;
    }

    nsCOMPtr<nsIWidget> ppWidget;
    ppBaseWindow->GetMainWidget( getter_AddRefs( ppWidget ) );

    return (HWND)( ppWidget->GetNativeData( NS_NATIVE_WIDGET ) );
}

nsresult
nsNativeAppSupportOS2::ReParent( nsISupports *window, HWND newParent ) {
    HWND hMainClient = hwndForDOMWindow( window );
    if ( !hMainClient ) {
        return NS_ERROR_FAILURE;
    }
    HWND hMainFrame = WinQueryWindow(hMainClient, QW_PARENT);

    // Reset the parent.
    WinSetParent( hMainFrame, newParent, FALSE );

    return NS_OK;
}

static const char sJSStackContractID[] = "@mozilla.org/js/xpc/ContextStack;1";

class SafeJSContext {
public:
  SafeJSContext();
  ~SafeJSContext();

  nsresult   Push();
  JSContext *get() { return mContext; }

protected:
  nsCOMPtr<nsIThreadJSContextStack>  mService;
  JSContext                         *mContext;
};

SafeJSContext::SafeJSContext() : mContext(nsnull) {
}

SafeJSContext::~SafeJSContext() {
  JSContext *cx;
  nsresult   rv;

  if(mContext) {
    rv = mService->Pop(&cx);
    NS_ASSERTION(NS_SUCCEEDED(rv) && cx == mContext, "JSContext push/pop mismatch");
  }
}

nsresult SafeJSContext::Push() {
  nsresult rv;

  if (mContext) // only once
    return NS_ERROR_FAILURE;

  mService = do_GetService(sJSStackContractID);
  if(mService) {
    rv = mService->GetSafeJSContext(&mContext);
    if (NS_SUCCEEDED(rv) && mContext) {
      rv = mService->Push(mContext);
      if (NS_FAILED(rv))
        mContext = 0;
    }
  }
  return mContext ? NS_OK : NS_ERROR_FAILURE; 
}


nsresult
nsNativeAppSupportOS2::OpenBrowserWindow( const char *args, PRBool newWindow ) {
    nsresult rv = NS_OK;
    // Open the argument URL in the most recently used Navigator window.
    // If there is no Nav window, open a new one.
    
    // Get most recently used Nav window.
    nsCOMPtr<nsIDOMWindowInternal> navWin;
    GetMostRecentWindow( NS_LITERAL_STRING( "navigator:browser" ).get(), getter_AddRefs( navWin ) );

    // This isn't really a loop.  We just use "break" statements to fall
    // out to the OpenWindow call when things go awry.
    do {
        // If caller requires a new window, then don't use an existing one.
        if ( newWindow ) {
            break;
        }
        if ( !navWin ) {
            // Have to open a new one.
            break;
        }
        // Get content window.
        nsCOMPtr<nsIDOMWindow> content;
        navWin->GetContent( getter_AddRefs( content ) );
        if ( !content ) {
            break;
        }
        // Convert that to internal interface.
        nsCOMPtr<nsIDOMWindowInternal> internalContent( do_QueryInterface( content ) );
        if ( !internalContent ) {
            break;
        }
        // Get location.
        nsCOMPtr<nsIDOMLocation> location;
        internalContent->GetLocation( getter_AddRefs( location ) );
        if ( !location ) {
            break;
        }
        // Set up environment.
        SafeJSContext context;
        if ( NS_FAILED( context.Push() ) ) {
            break;
        }
        // Set href.
        nsAutoString url; url.AssignWithConversion( args );
        if ( NS_FAILED( location->SetHref( url ) ) ) {
            break;
        }
        // Finally, if we get here, we're done.
        return NS_OK;
    } while ( PR_FALSE );

    nsCOMPtr<nsICmdLineHandler> handler(do_GetService("@mozilla.org/commandlinehandler/general-startup;1?type=browser", &rv));
    if (NS_FAILED(rv)) return rv;

    nsXPIDLCString chromeUrlForTask;
    rv = handler->GetChromeUrlForTask(getter_Copies(chromeUrlForTask));
    if (NS_FAILED(rv)) return rv;

    // Last resort is to open a brand new window.
    return OpenWindow( chromeUrlForTask, args );
}

//   This opens a special browser window for purposes of priming the pump for
//   server mode (getting stuff into the caching, loading .dlls, etc.).  The
//   window will have these attributes:
//     - Load about:blank (no home page)
//     - No toolbar (so there's no sidebar panels loaded, either)
//     - Pass magic arg to cause window to close in onload handler.
NS_IMETHODIMP
nsNativeAppSupportOS2::StartServerMode() {

    if (mShouldShowUI) {
        // We dont have to anything anymore. The native UI
        // will create the window
        return NS_OK;
    } else {
        // Sometimes a window will have been opened even though mShouldShowUI is false
        // (e.g., mozilla -mail -turbo).  Detect that by testing whether there's a
        // window already open.
        nsCOMPtr<nsIDOMWindowInternal> win;
        GetMostRecentWindow( 0, getter_AddRefs( win ) );
        if ( win ) {
            // Window already opened, don't need this special Nav window.
            return NS_OK;
        }
    }

    // Since native UI wont create any window, we create a hidden window
    // so thing work alright.

    // Create some of the objects we'll need.
    nsCOMPtr<nsIWindowWatcher>   ww(do_GetService(NS_WINDOWWATCHER_CONTRACTID));
    nsCOMPtr<nsISupportsString> arg1(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID));
    nsCOMPtr<nsISupportsString> arg2(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID));
    if ( !ww || !arg1 || !arg2 ) {
        return NS_OK;
    }

    // Create the array for the arguments.
    nsCOMPtr<nsISupportsArray> argArray = do_CreateInstance(NS_SUPPORTSARRAY_CONTRACTID);
    if ( !argArray ) {
        return NS_OK;
    }

    // arg1 is the url to load.
    // arg2 is the string that tells navigator.js to auto-close.
    arg1->SetData( NS_LITERAL_STRING( "about:blank" ) );
    arg2->SetData( NS_LITERAL_STRING( "turbo=yes" ) );

    // Put args into array.
    if ( NS_FAILED( argArray->AppendElement( arg1 ) ) ||
        NS_FAILED( argArray->AppendElement( arg2 ) ) ) {
        return NS_OK;
    }

    // Now open the window.
    nsCOMPtr<nsIDOMWindow> newWindow;
    ww->OpenWindow( 0,
        "chrome://navigator/content",
        "_blank",
        "chrome,dialog=no,toolbar=no",
        argArray,
        getter_AddRefs( newWindow ) );

    if ( !newWindow ) {
        return NS_OK;
    }
    mInitialWindowActive = PR_TRUE;

    // Hide this window by re-parenting it (to ensure it doesn't appear).
    ReParent( newWindow, MessageWindow().getHWND() );

    return NS_OK;
}

NS_IMETHODIMP
nsNativeAppSupportOS2::SetIsServerMode( PRBool isServerMode ) {
    return nsNativeAppSupportBase::SetIsServerMode( isServerMode );
}

NS_IMETHODIMP
nsNativeAppSupportOS2::OnLastWindowClosing() {
 
    if ( !mServerMode )
        return NS_OK;

    // If the last window closed is our special "turbo" window made
    // in StartServerMode(), don't do anything.
    if ( mInitialWindowActive ) {
        mInitialWindowActive = PR_FALSE;
        return NS_OK;
    }

    nsresult rv;

    // If activated by the browser.turbo.singleProfileOnly pref,
    // check for multi-profile situation and turn off turbo mode
    // if there are multiple profiles.
    PRBool singleProfileOnly = PR_FALSE;
    nsCOMPtr<nsIPref> prefService( do_GetService( NS_PREF_CONTRACTID, &rv ) );
    if ( NS_SUCCEEDED( rv ) ) {
        prefService->GetBoolPref( "browser.turbo.singleProfileOnly", &singleProfileOnly );
    }
    if ( singleProfileOnly ) {
        nsCOMPtr<nsIProfile> profileMgr( do_GetService( NS_PROFILE_CONTRACTID, &rv ) );
        if ( NS_SUCCEEDED( rv ) ) {
            PRInt32 profileCount = 0;
            if ( NS_SUCCEEDED( profileMgr->GetProfileCount( &profileCount ) ) &&
                 profileCount > 1 ) {
                // Turn off turbo mode and quit the application.
                SetIsServerMode( PR_FALSE );
                nsCOMPtr<nsIAppStartup> appShell
                    (do_GetService(NS_APPSTARTUP_CONTRACTID, &rv));
                if ( NS_SUCCEEDED( rv ) ) {
                    appShell->Quit(nsIAppShellService::eAttemptQuit);
                }
                return NS_OK;
            }
        }
    }

    nsCOMPtr<nsIObserverService> observerService(do_GetService("@mozilla.org/observer-service;1", &rv));
    if (NS_FAILED(rv)) return rv;
    observerService->NotifyObservers(nsnull, "session-logout", nsnull);

    mForceProfileStartup = PR_TRUE;

    return NS_OK;
}