pjs/xpcom/io/nsFastLoadService.cpp

473 строки
13 KiB
C++
Исходник Обычный вид История

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
* The contents of this file are subject to the Netscape Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The Original Code is Mozilla FastLoad code.
*
* The Initial Developer of the Original Code is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 2001 Netscape Communications Corporation. All
* Rights Reserved.
*
* Contributor(s):
* Brendan Eich <brendan@mozilla.org> (original author)
*/
#include "prtypes.h"
#include "prio.h"
#include "prtime.h"
#include "pldhash.h"
#include "nsAppDirectoryServiceDefs.h"
#include "nsAutoLock.h"
#include "nsCOMPtr.h"
#include "nsFastLoadFile.h"
#include "nsFastLoadPtr.h"
#include "nsFastLoadService.h"
#include "nsString.h"
#include "nsIComponentManager.h"
#include "nsIFile.h"
#include "nsIObjectInputStream.h"
#include "nsIObjectOutputStream.h"
#include "nsISeekableStream.h"
#include "nsISupports.h"
// XXXbe we *know* that nsIObject*Stream is implemented by nsFastLoadFile.cpp
inline nsFastLoadFileReader* GetReader(nsIObjectInputStream* aStream) {
return NS_STATIC_CAST(nsFastLoadFileReader*, aStream);
}
inline nsFastLoadFileWriter* GetWriter(nsIObjectOutputStream* aStream) {
return NS_STATIC_CAST(nsFastLoadFileWriter*, aStream);
}
PR_IMPLEMENT_DATA(nsIFastLoadService*) gFastLoadService_ = nsnull;
NS_IMPL_THREADSAFE_ISUPPORTS1(nsFastLoadService, nsIFastLoadService)
nsFastLoadService::nsFastLoadService()
: mLock(nsnull),
mFastLoadPtrMap(nsnull),
mDirection(0)
{
NS_INIT_REFCNT();
NS_ASSERTION(gFastLoadService_ == nsnull, "double FastLoadService init?");
gFastLoadService_ = this;
}
nsFastLoadService::~nsFastLoadService()
{
gFastLoadService_ = nsnull;
if (mInputStream)
mInputStream->Close();
if (mOutputStream)
mOutputStream->Close();
if (mFastLoadPtrMap)
PL_DHashTableDestroy(mFastLoadPtrMap);
if (mLock)
PR_DestroyLock(mLock);
}
NS_IMETHODIMP
nsFastLoadService::Create(nsISupports *aOuter, REFNSIID aIID, void **aResult)
{
*aResult = nsnull;
if (aOuter)
return NS_ERROR_NO_AGGREGATION;
nsFastLoadService* fastLoadService = new nsFastLoadService();
if (!fastLoadService)
return NS_ERROR_OUT_OF_MEMORY;
fastLoadService->mLock = PR_NewLock();
if (!fastLoadService->mLock) {
delete fastLoadService;
return NS_ERROR_OUT_OF_MEMORY;
}
NS_ADDREF(fastLoadService);
nsresult rv = fastLoadService->QueryInterface(aIID, aResult);
NS_RELEASE(fastLoadService);
return rv;
}
#if defined XP_MAC
// Mac format: "<Basename> FastLoad File" with <basename> capitalized.
# include "nsCRT.h"
# define MASSAGE_BASENAME(bn) (bn.SetCharAt(nsCRT::ToUpper(bn.CharAt(0)), 0))
# define PLATFORM_FASL_SUFFIX " FastLoad File"
#elif defined(XP_UNIX) || defined(XP_BEOS)
// Unix format: "<basename>.mfasl".
# define MASSAGE_BASENAME(bn) /* nothing */
# define PLATFORM_FASL_SUFFIX ".mfasl"
#elif defined(XP_WIN) || defined(XP_OS2)
// Windows format: "<basename>.mfl".
# define MASSAGE_BASENAME(bn) /* nothing */
# define PLATFORM_FASL_SUFFIX ".mfl"
#endif
nsresult
nsFastLoadService::NewFastLoadFile(const char* aBaseName, nsIFile* *aResult)
{
nsresult rv;
nsCOMPtr<nsIFile> file;
rv = NS_GetSpecialDirectory(NS_APP_USER_PROFILE_50_DIR,
getter_AddRefs(file));
if (NS_FAILED(rv)) return rv;
nsCAutoString name(aBaseName);
MASSAGE_BASENAME(name);
name += PLATFORM_FASL_SUFFIX;
rv = file->Append(name);
if (NS_FAILED(rv)) return rv;
*aResult = file;
NS_ADDREF(*aResult);
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::NewInputStream(nsIInputStream* aSrcStream,
PRUint32 *aChecksum,
nsIObjectInputStream* *aResult)
{
nsresult rv;
nsAutoLock lock(mLock);
nsCOMPtr<nsIObjectInputStream> stream;
rv = NS_NewFastLoadFileReader(getter_AddRefs(stream), aSrcStream);
if (NS_FAILED(rv)) return rv;
nsFastLoadFileReader* reader = GetReader(stream);
rv = reader->GetChecksum(aChecksum);
if (NS_FAILED(rv)) return rv;
*aResult = stream;
NS_ADDREF(*aResult);
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::NewOutputStream(nsIOutputStream* aDestStream,
nsIObjectOutputStream* *aResult)
{
nsAutoLock lock(mLock);
return NS_NewFastLoadFileWriter(aResult, aDestStream);
}
NS_IMETHODIMP
nsFastLoadService::GetCurrentInputStream(nsIObjectInputStream* *aResult)
{
NS_IF_ADDREF(*aResult = mInputStream);
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::SetCurrentInputStream(nsIObjectInputStream* aStream)
{
nsAutoLock lock(mLock);
mInputStream = aStream;
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::GetCurrentOutputStream(nsIObjectOutputStream* *aResult)
{
NS_IF_ADDREF(*aResult = mOutputStream);
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::SetCurrentOutputStream(nsIObjectOutputStream* aStream)
{
nsAutoLock lock(mLock);
mOutputStream = aStream;
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::GetCurrentFileIO(nsIFastLoadFileIO* *aResult)
{
NS_IF_ADDREF(*aResult = mFileIO);
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::SetCurrentFileIO(nsIFastLoadFileIO* aFileIO)
{
nsAutoLock lock(mLock);
mFileIO = aFileIO;
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::GetCurrentDirection(PRInt32 *aResult)
{
*aResult = mDirection;
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::StartMuxedDocument(nsISupports* aURI, const char* aURISpec,
PRInt32 aDirectionFlags)
{
nsresult rv = NS_ERROR_NOT_AVAILABLE;
nsAutoLock lock(mLock);
// Try for an input stream first, in case aURISpec's data is multiplexed
// in the current FastLoad file.
if ((aDirectionFlags & NS_FASTLOAD_READ) && mInputStream) {
nsFastLoadFileReader* reader = GetReader(mInputStream);
rv = reader->StartMuxedDocument(aURI, aURISpec);
if (NS_SUCCEEDED(rv) || rv != NS_ERROR_NOT_AVAILABLE)
return rv;
// If aURISpec is not found in the reader, wrap it with an updater
// and store the updater at mOutputStream.
if (!mOutputStream && mFileIO) {
nsCOMPtr<nsIOutputStream> output;
rv = mFileIO->GetOutputStream(getter_AddRefs(output));
if (NS_FAILED(rv)) return rv;
rv = NS_NewFastLoadFileUpdater(getter_AddRefs(mOutputStream),
output,
reader);
if (NS_FAILED(rv)) return rv;
}
if (aDirectionFlags == NS_FASTLOAD_READ) {
// Tell our caller to re-start multiplexing, rather than attempt
// to select and deserialize now.
return NS_ERROR_NOT_AVAILABLE;
}
- Better failure codes from nsXULPrototypeScript::Deserialize. - Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize failure, instead of just nulling the FastLoad service's output stream. - Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for good measure. - The needless "Current" adjective in nsIFastLoadService attribute and method names is no more. - Add a do_GetFastLoadService() helper, to use CID instead of contractid, and to let the compiler consolidate the static inline CID. - Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without the checksum verification step when reading a FastLoad file. - Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad service so we don't recompute it when re-opening the FastLoad file as mailnews and other top-levels start up. Fill the checksum cache in EndFastLoad, when the last pseudo-concurrent top-level finishes loading. My hope to compute the checksum while writing the FastLoad file ran afoul of misordered writes. The old code to checksum the in-memory nsFastLoadHeader also was broken on little endian platforms. Now all checksumming is done via a separate read pass over the complete file, save for the header's checksum field, which is summed as if it contained zero. - Track and check FastLoad file dependencies. This required groveling with a bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it and weep. Dependency checking, as well as checksum access and computation, use better-factored nsIFastLoad{File,Read,Write}Control interfaces. - nsBufferedStream::Seek wasn't flushing the buffer when seeking backward within the buffer, but it must, because mCursor bounds the amount to write if the buffer contains the end of file. - Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we don't have to screw around with the bufferying layer when checksumming. Also implement nsIStreamBufferAccess in nsBufferedOutputStream. - nsISeekableOutputStream was bogus, based on a bad state I had put the nsBufferedOutputStream code in on its way from being completely broken when you seek backwards outside of the buffer. Removing this interface required using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful ordering of Close calls (the Writer or Updater must close after the Reader, so that the Reader's underlying, unbuffered input stream can be read by nsFastLoadFileWriter::Close to compute the checksum. - Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style, nsnull vs. 0, useless variable elimination, tortured control flow, AutoString instead of String, and gratuitous ; after nsISupportsUtils.h macro call cleanups.
2001-08-17 13:52:55 +04:00
}
if ((aDirectionFlags & NS_FASTLOAD_WRITE) && mOutputStream)
rv = GetWriter(mOutputStream)->StartMuxedDocument(aURI, aURISpec);
return rv;
}
NS_IMETHODIMP
nsFastLoadService::SelectMuxedDocument(nsISupports* aURI)
{
nsresult rv = NS_ERROR_NOT_AVAILABLE;
nsAutoLock lock(mLock);
// Try to select the reader, if any; then only if the URI was not in the
// file already, select the writer/updater.
if (mInputStream) {
rv = GetReader(mInputStream)->SelectMuxedDocument(aURI);
if (NS_SUCCEEDED(rv))
mDirection = NS_FASTLOAD_READ;
}
if (rv == NS_ERROR_NOT_AVAILABLE && mOutputStream) {
rv = GetWriter(mOutputStream)->SelectMuxedDocument(aURI);
if (NS_SUCCEEDED(rv))
mDirection = NS_FASTLOAD_WRITE;
}
return rv;
}
NS_IMETHODIMP
nsFastLoadService::EndMuxedDocument(nsISupports* aURI)
{
nsresult rv = NS_ERROR_NOT_AVAILABLE;
nsAutoLock lock(mLock);
// Try to end the document identified by aURI in the reader, if any; then
// only if the URI was not in the file already, end the writer/updater.
if (mInputStream)
rv = GetReader(mInputStream)->EndMuxedDocument(aURI);
if (rv == NS_ERROR_NOT_AVAILABLE && mOutputStream)
rv = GetWriter(mOutputStream)->EndMuxedDocument(aURI);
mDirection = 0;
return rv;
}
NS_IMETHODIMP
nsFastLoadService::AppendDependency(const char* aFileName)
{
nsAutoLock lock(mLock);
if (!mOutputStream)
return NS_OK;
if (!GetWriter(mOutputStream)->AppendDependency(aFileName))
return NS_ERROR_OUT_OF_MEMORY;
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::MaxDependencyModifiedTime(PRTime *aTime)
{
*aTime = LL_ZERO;
nsAutoLock lock(mLock);
if (!mOutputStream)
- Better failure codes from nsXULPrototypeScript::Deserialize. - Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize failure, instead of just nulling the FastLoad service's output stream. - Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for good measure. - The needless "Current" adjective in nsIFastLoadService attribute and method names is no more. - Add a do_GetFastLoadService() helper, to use CID instead of contractid, and to let the compiler consolidate the static inline CID. - Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without the checksum verification step when reading a FastLoad file. - Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad service so we don't recompute it when re-opening the FastLoad file as mailnews and other top-levels start up. Fill the checksum cache in EndFastLoad, when the last pseudo-concurrent top-level finishes loading. My hope to compute the checksum while writing the FastLoad file ran afoul of misordered writes. The old code to checksum the in-memory nsFastLoadHeader also was broken on little endian platforms. Now all checksumming is done via a separate read pass over the complete file, save for the header's checksum field, which is summed as if it contained zero. - Track and check FastLoad file dependencies. This required groveling with a bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it and weep. Dependency checking, as well as checksum access and computation, use better-factored nsIFastLoad{File,Read,Write}Control interfaces. - nsBufferedStream::Seek wasn't flushing the buffer when seeking backward within the buffer, but it must, because mCursor bounds the amount to write if the buffer contains the end of file. - Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we don't have to screw around with the bufferying layer when checksumming. Also implement nsIStreamBufferAccess in nsBufferedOutputStream. - nsISeekableOutputStream was bogus, based on a bad state I had put the nsBufferedOutputStream code in on its way from being completely broken when you seek backwards outside of the buffer. Removing this interface required using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful ordering of Close calls (the Writer or Updater must close after the Reader, so that the Reader's underlying, unbuffered input stream can be read by nsFastLoadFileWriter::Close to compute the checksum. - Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style, nsnull vs. 0, useless variable elimination, tortured control flow, AutoString instead of String, and gratuitous ; after nsISupportsUtils.h macro call cleanups.
2001-08-17 13:52:55 +04:00
return NS_OK;
nsFastLoadFileWriter* writer = GetWriter(mOutputStream);
- Better failure codes from nsXULPrototypeScript::Deserialize. - Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize failure, instead of just nulling the FastLoad service's output stream. - Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for good measure. - The needless "Current" adjective in nsIFastLoadService attribute and method names is no more. - Add a do_GetFastLoadService() helper, to use CID instead of contractid, and to let the compiler consolidate the static inline CID. - Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without the checksum verification step when reading a FastLoad file. - Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad service so we don't recompute it when re-opening the FastLoad file as mailnews and other top-levels start up. Fill the checksum cache in EndFastLoad, when the last pseudo-concurrent top-level finishes loading. My hope to compute the checksum while writing the FastLoad file ran afoul of misordered writes. The old code to checksum the in-memory nsFastLoadHeader also was broken on little endian platforms. Now all checksumming is done via a separate read pass over the complete file, save for the header's checksum field, which is summed as if it contained zero. - Track and check FastLoad file dependencies. This required groveling with a bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it and weep. Dependency checking, as well as checksum access and computation, use better-factored nsIFastLoad{File,Read,Write}Control interfaces. - nsBufferedStream::Seek wasn't flushing the buffer when seeking backward within the buffer, but it must, because mCursor bounds the amount to write if the buffer contains the end of file. - Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we don't have to screw around with the bufferying layer when checksumming. Also implement nsIStreamBufferAccess in nsBufferedOutputStream. - nsISeekableOutputStream was bogus, based on a bad state I had put the nsBufferedOutputStream code in on its way from being completely broken when you seek backwards outside of the buffer. Removing this interface required using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful ordering of Close calls (the Writer or Updater must close after the Reader, so that the Reader's underlying, unbuffered input stream can be read by nsFastLoadFileWriter::Close to compute the checksum. - Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style, nsnull vs. 0, useless variable elimination, tortured control flow, AutoString instead of String, and gratuitous ; after nsISupportsUtils.h macro call cleanups.
2001-08-17 13:52:55 +04:00
for (PRUint32 i = 0, n = writer->GetDependencyCount(); i < n; i++) {
PRFileInfo info;
if (PR_GetFileInfo(writer->GetDependency(i), &info) == PR_SUCCESS &&
LL_CMP(*aTime, <, info.modifyTime)) {
*aTime = info.modifyTime;
}
}
- Better failure codes from nsXULPrototypeScript::Deserialize. - Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize failure, instead of just nulling the FastLoad service's output stream. - Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for good measure. - The needless "Current" adjective in nsIFastLoadService attribute and method names is no more. - Add a do_GetFastLoadService() helper, to use CID instead of contractid, and to let the compiler consolidate the static inline CID. - Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without the checksum verification step when reading a FastLoad file. - Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad service so we don't recompute it when re-opening the FastLoad file as mailnews and other top-levels start up. Fill the checksum cache in EndFastLoad, when the last pseudo-concurrent top-level finishes loading. My hope to compute the checksum while writing the FastLoad file ran afoul of misordered writes. The old code to checksum the in-memory nsFastLoadHeader also was broken on little endian platforms. Now all checksumming is done via a separate read pass over the complete file, save for the header's checksum field, which is summed as if it contained zero. - Track and check FastLoad file dependencies. This required groveling with a bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it and weep. Dependency checking, as well as checksum access and computation, use better-factored nsIFastLoad{File,Read,Write}Control interfaces. - nsBufferedStream::Seek wasn't flushing the buffer when seeking backward within the buffer, but it must, because mCursor bounds the amount to write if the buffer contains the end of file. - Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we don't have to screw around with the bufferying layer when checksumming. Also implement nsIStreamBufferAccess in nsBufferedOutputStream. - nsISeekableOutputStream was bogus, based on a bad state I had put the nsBufferedOutputStream code in on its way from being completely broken when you seek backwards outside of the buffer. Removing this interface required using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful ordering of Close calls (the Writer or Updater must close after the Reader, so that the Reader's underlying, unbuffered input stream can be read by nsFastLoadFileWriter::Close to compute the checksum. - Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style, nsnull vs. 0, useless variable elimination, tortured control flow, AutoString instead of String, and gratuitous ; after nsISupportsUtils.h macro call cleanups.
2001-08-17 13:52:55 +04:00
return NS_OK;
}
struct nsFastLoadPtrEntry : public PLDHashEntryHdr {
nsISupports** mPtrAddr; // key, must come first for PL_DHashGetStubOps
PRUint32 mOffset;
};
NS_IMETHODIMP
nsFastLoadService::GetFastLoadReferent(nsISupports* *aPtrAddr)
{
NS_ASSERTION(*aPtrAddr == nsnull,
"aPtrAddr doesn't point to null nsFastLoadPtr<T>::mRawAddr?");
nsAutoLock lock(mLock);
if (!mFastLoadPtrMap || !mInputStream)
return NS_OK;
nsFastLoadPtrEntry* entry =
NS_STATIC_CAST(nsFastLoadPtrEntry*,
PL_DHashTableOperate(mFastLoadPtrMap, aPtrAddr,
PL_DHASH_LOOKUP));
if (PL_DHASH_ENTRY_IS_FREE(entry))
return NS_OK;
nsresult rv;
nsCOMPtr<nsISeekableStream> seekable(do_QueryInterface(mInputStream));
rv = seekable->Seek(nsISeekableStream::NS_SEEK_SET, entry->mOffset);
if (NS_FAILED(rv)) return rv;
rv = mInputStream->ReadObject(PR_TRUE, aPtrAddr);
if (NS_FAILED(rv)) return rv;
// Shrink the table if half the entries are removed sentinels.
PRUint32 size = PR_BIT(mFastLoadPtrMap->sizeLog2);
if (mFastLoadPtrMap->removedCount >= (size >> 2))
PL_DHashTableOperate(mFastLoadPtrMap, entry, PL_DHASH_REMOVE);
else
PL_DHashTableRawRemove(mFastLoadPtrMap, entry);
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::ReadFastLoadPtr(nsIObjectInputStream* aInputStream,
nsISupports* *aPtrAddr)
{
// nsFastLoadPtrs self-construct to null, so if we have a non-null value
// in our inout parameter, we must have been read already, alright!
if (*aPtrAddr)
return NS_OK;
nsresult rv;
PRUint32 nextOffset;
nsAutoLock lock(mLock);
rv = aInputStream->Read32(&nextOffset);
if (NS_FAILED(rv)) return rv;
nsCOMPtr<nsISeekableStream> seekable(do_QueryInterface(aInputStream));
if (!seekable)
return NS_ERROR_FAILURE;
PRUint32 thisOffset;
rv = seekable->Tell(&thisOffset);
if (NS_FAILED(rv)) return rv;
rv = seekable->Seek(nsISeekableStream::NS_SEEK_SET, nextOffset);
if (NS_FAILED(rv)) return rv;
if (!mFastLoadPtrMap) {
mFastLoadPtrMap = PL_NewDHashTable(PL_DHashGetStubOps(), this,
sizeof(nsFastLoadPtrEntry),
PL_DHASH_MIN_SIZE);
if (!mFastLoadPtrMap)
return NS_ERROR_OUT_OF_MEMORY;
}
nsFastLoadPtrEntry* entry =
NS_STATIC_CAST(nsFastLoadPtrEntry*,
PL_DHashTableOperate(mFastLoadPtrMap, aPtrAddr,
PL_DHASH_ADD));
NS_ASSERTION(entry->mPtrAddr == nsnull, "duplicate nsFastLoadPtr?!");
entry->mPtrAddr = aPtrAddr;
entry->mOffset = thisOffset;
return NS_OK;
}
NS_IMETHODIMP
nsFastLoadService::WriteFastLoadPtr(nsIObjectOutputStream* aOutputStream,
nsISupports* aObject)
{
NS_ASSERTION(aObject != nsnull, "writing an unread nsFastLoadPtr?!");
if (!aObject)
return NS_ERROR_UNEXPECTED;
nsresult rv;
nsAutoLock lock(mLock); // serialize writes to aOutputStream
nsCOMPtr<nsISeekableStream> seekable(do_QueryInterface(aOutputStream));
if (!seekable)
return NS_ERROR_FAILURE;
PRUint32 saveOffset;
rv = seekable->Tell(&saveOffset);
if (NS_FAILED(rv)) return rv;
rv = aOutputStream->Write32(0); // nextOffset placeholder
if (NS_FAILED(rv)) return rv;
rv = aOutputStream->WriteObject(aObject, PR_TRUE);
if (NS_FAILED(rv)) return rv;
PRUint32 nextOffset;
rv = seekable->Tell(&nextOffset);
if (NS_FAILED(rv)) return rv;
rv = seekable->Seek(nsISeekableStream::NS_SEEK_SET, saveOffset);
if (NS_FAILED(rv)) return rv;
rv = aOutputStream->Write32(nextOffset);
if (NS_FAILED(rv)) return rv;
rv = seekable->Seek(nsISeekableStream::NS_SEEK_SET, nextOffset);
if (NS_FAILED(rv)) return rv;
return NS_OK;
}