pjs/gfx/thebes/gfxFT2FontBase.cpp

228 строки
9.0 KiB
C++
Исходник Обычный вид История

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 4 -*-
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Foundation code.
*
* The Initial Developer of the Original Code is Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2009
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Vladimir Vukicevic <vladimir@mozilla.com>
* Masayuki Nakano <masayuki@d-toybox.com>
* Behdad Esfahbod <behdad@gnome.org>
* Mats Palmgren <mats.palmgren@bredband.net>
* Karl Tomlinson <karlt+@karlt.net>, Mozilla Corporation
* Takuro Ashie <ashie@clear-code.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "gfxFT2FontBase.h"
#include "gfxFT2Utils.h"
gfxFT2FontBase::gfxFT2FontBase(cairo_scaled_font_t *aScaledFont,
gfxFontEntry *aFontEntry,
const gfxFontStyle *aFontStyle)
: gfxFont(aFontEntry, aFontStyle),
mScaledFont(aScaledFont),
mSpaceGlyph(0),
mHasMetrics(PR_FALSE)
{
cairo_scaled_font_reference(mScaledFont);
}
gfxFT2FontBase::~gfxFT2FontBase()
{
cairo_scaled_font_destroy(mScaledFont);
}
PRUint32
gfxFT2FontBase::GetGlyph(PRUint32 aCharCode)
{
// FcFreeTypeCharIndex needs to lock the FT_Face and can end up searching
// through all the postscript glyph names in the font. Therefore use a
// lightweight cache, which is stored on the cairo_font_face_t.
cairo_font_face_t *face =
cairo_scaled_font_get_font_face(CairoScaledFont());
if (cairo_font_face_status(face) != CAIRO_STATUS_SUCCESS)
return 0;
// This cache algorithm and size is based on what is done in
// cairo_scaled_font_text_to_glyphs and pango_fc_font_real_get_glyph. I
// think the concept is that adjacent characters probably come mostly from
// one Unicode block. This assumption is probably not so valid with
// scripts with large character sets as used for East Asian languages.
struct CmapCacheSlot {
PRUint32 mCharCode;
PRUint32 mGlyphIndex;
};
const PRUint32 kNumSlots = 256;
static cairo_user_data_key_t sCmapCacheKey;
CmapCacheSlot *slots = static_cast<CmapCacheSlot*>
(cairo_font_face_get_user_data(face, &sCmapCacheKey));
if (!slots) {
// cairo's caches can keep some cairo_font_faces alive past our last
// destroy, so the destroy function (free) for the cache must be
// callable from cairo without any assumptions about what other
// modules have not been shutdown.
slots = static_cast<CmapCacheSlot*>
(calloc(kNumSlots, sizeof(CmapCacheSlot)));
if (!slots)
return 0;
cairo_status_t status =
cairo_font_face_set_user_data(face, &sCmapCacheKey, slots, free);
if (status != CAIRO_STATUS_SUCCESS) { // OOM
free(slots);
return 0;
}
// Invalidate slot 0 by setting its char code to something that would
// never end up in slot 0. All other slots are already invalid
// because they have mCharCode = 0 and a glyph for char code 0 will
// always be in the slot 0.
slots[0].mCharCode = 1;
}
CmapCacheSlot *slot = &slots[aCharCode % kNumSlots];
if (slot->mCharCode != aCharCode) {
slot->mCharCode = aCharCode;
slot->mGlyphIndex = gfxFT2LockedFace(this).GetGlyph(aCharCode);
}
return slot->mGlyphIndex;
}
void
gfxFT2FontBase::GetGlyphExtents(PRUint32 aGlyph, cairo_text_extents_t* aExtents)
{
NS_PRECONDITION(aExtents != NULL, "aExtents must not be NULL");
cairo_glyph_t glyphs[1];
glyphs[0].index = aGlyph;
glyphs[0].x = 0.0;
glyphs[0].y = 0.0;
// cairo does some caching for us here but perhaps a small gain could be
// made by caching more. It is usually only the advance that is needed,
// so caching only the advance could allow many requests to be cached with
// little memory use. Ideally this cache would be merged with
// gfxGlyphExtents.
cairo_scaled_font_glyph_extents(CairoScaledFont(), glyphs, 1, aExtents);
}
const gfxFont::Metrics&
gfxFT2FontBase::GetMetrics()
{
if (mHasMetrics)
return mMetrics;
if (NS_UNLIKELY(GetStyle()->size <= 0.0)) {
new(&mMetrics) gfxFont::Metrics(); // zero initialize
mSpaceGlyph = 0;
} else {
gfxFT2LockedFace(this).GetMetrics(&mMetrics, &mSpaceGlyph);
}
SanitizeMetrics(&mMetrics, PR_FALSE);
#if 0
// printf("font name: %s %f\n", NS_ConvertUTF16toUTF8(GetName()).get(), GetStyle()->size);
// printf ("pango font %s\n", pango_font_description_to_string (pango_font_describe (font)));
fprintf (stderr, "Font: %s\n", NS_ConvertUTF16toUTF8(GetName()).get());
fprintf (stderr, " emHeight: %f emAscent: %f emDescent: %f\n", mMetrics.emHeight, mMetrics.emAscent, mMetrics.emDescent);
fprintf (stderr, " maxAscent: %f maxDescent: %f\n", mMetrics.maxAscent, mMetrics.maxDescent);
fprintf (stderr, " internalLeading: %f externalLeading: %f\n", mMetrics.externalLeading, mMetrics.internalLeading);
fprintf (stderr, " spaceWidth: %f aveCharWidth: %f xHeight: %f\n", mMetrics.spaceWidth, mMetrics.aveCharWidth, mMetrics.xHeight);
fprintf (stderr, " uOff: %f uSize: %f stOff: %f stSize: %f suOff: %f suSize: %f\n", mMetrics.underlineOffset, mMetrics.underlineSize, mMetrics.strikeoutOffset, mMetrics.strikeoutSize, mMetrics.superscriptOffset, mMetrics.subscriptOffset);
#endif
mHasMetrics = PR_TRUE;
return mMetrics;
}
nsString
gfxFT2FontBase::GetUniqueName()
{
return GetName();
}
// Get the glyphID of a space
PRUint32
gfxFT2FontBase::GetSpaceGlyph()
{
NS_ASSERTION(GetStyle()->size != 0,
"forgot to short-circuit a text run with zero-sized font?");
GetMetrics();
return mSpaceGlyph;
}
PRBool
gfxFT2FontBase::SetupCairoFont(gfxContext *aContext)
{
cairo_t *cr = aContext->GetCairo();
// The scaled font ctm is not relevant right here because
// cairo_set_scaled_font does not record the scaled font itself, but
// merely the font_face, font_matrix, font_options. The scaled_font used
// for the target can be different from the scaled_font passed to
// cairo_set_scaled_font. (Unfortunately we have measured only for an
// identity ctm.)
cairo_scaled_font_t *cairoFont = CairoScaledFont();
if (cairo_scaled_font_status(cairoFont) != CAIRO_STATUS_SUCCESS) {
// Don't cairo_set_scaled_font as that would propagate the error to
// the cairo_t, precluding any further drawing.
return PR_FALSE;
}
// Thoughts on which font_options to set on the context:
//
// cairoFont has been created for screen rendering.
//
// When the context is being used for screen rendering, we should set
// font_options such that the same scaled_font gets used (when the ctm is
// the same). The use of explicit font_options recorded in
// CreateScaledFont ensures that this will happen.
//
// XXXkt: For pdf and ps surfaces, I don't know whether it's better to
// remove surface-specific options, or try to draw with the same
// scaled_font that was used to measure. As the same font_face is being
// used, its font_options will often override some values anyway (unless
// perhaps we remove those from the FcPattern at face creation).
//
// I can't see any significant difference in printing, irrespective of
// what is set here. It's too late to change things here as measuring has
// already taken place. We should really be measuring with a different
// font for pdf and ps surfaces (bug 403513).
cairo_set_scaled_font(cr, cairoFont);
return PR_TRUE;
}