This commit is contained in:
atotic 1998-06-19 00:15:19 +00:00
Родитель 4e8deaae08
Коммит def6650bbd
4 изменённых файлов: 0 добавлений и 1736 удалений

Просмотреть файл

@ -44,7 +44,6 @@
#include "prtypes.h" #include "prtypes.h"
#include "prio.h" #include "prio.h"
#include "plstr.h" #include "plstr.h"
#include "prstrm.h"
#include <fstream.h> #include <fstream.h>

Просмотреть файл

@ -1,867 +0,0 @@
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
//#define __INCREMENTAL 1
#include "nsHTMLParser.h"
#include "nsIContentSink.h"
#include "nsString.h"
#include "nsCRT.h"
#include "COtherDTD.h"
#include "CNavDTD.h"
#include "nsScanner.h"
#include "prenv.h" //this is here for debug reasons...
#include "plstr.h"
#include "prstrm.h"
#include <fstream.h>
#include "nsIInputStream.h"
#include "nsIParserFilter.h"
/* UNCOMMENT THIS IF STUFF STOPS WORKING...
#ifdef XP_PC
#include <direct.h> //this is here for debug reasons...
#endif
#include <time.h>
#include "prmem.h"
*/
static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
static NS_DEFINE_IID(kClassIID, NS_IHTML_PARSER_IID);
static NS_DEFINE_IID(kIParserIID, NS_IPARSER_IID);
static const char* kNullURL = "Error: Null URL given";
static const char* kNullFilename= "Error: Null filename given";
static const char* kNullTokenizer = "Error: Unable to construct tokenizer";
static const int gTransferBufferSize=4096; //size of the buffer used in moving data from iistream
//#define DEBUG_SAVE_SOURCE_DOC 1
#ifdef DEBUG_SAVE_SOURCE_DOC
fstream* gTempStream=0;
#endif
/**
* This method is defined in nsIParser. It is used to
* cause the COM-like construction of an nsHTMLParser.
*
* @update gess 3/25/98
* @param nsIParser** ptr to newly instantiated parser
* @return NS_xxx error result
*/
NS_HTMLPARS nsresult NS_NewHTMLParser(nsIParser** aInstancePtrResult)
{
nsHTMLParser *it = new nsHTMLParser();
if (it == 0) {
return NS_ERROR_OUT_OF_MEMORY;
}
return it->QueryInterface(kIParserIID, (void **) aInstancePtrResult);
}
class CTokenDeallocator: public nsDequeFunctor{
public:
virtual void operator()(void* anObject) {
CToken* aToken = (CToken*)anObject;
delete aToken;
}
};
CTokenDeallocator gTokenKiller;
/**
* default constructor
*
* @update gess 3/25/98
* @param
* @return
*/
nsHTMLParser::nsHTMLParser() : mTokenDeque(gTokenKiller) {
NS_INIT_REFCNT();
mParserFilter = nsnull;
mListener = nsnull;
mTransferBuffer=0;
mSink=0;
mCurrentPos=0;
mMarkPos=0;
mParseMode=eParseMode_unknown;
mDTD=0;
}
/**
* Default destructor
*
* @update gess 3/25/98
* @param
* @return
*/
nsHTMLParser::~nsHTMLParser() {
NS_IF_RELEASE(mListener);
if(mTransferBuffer)
delete [] mTransferBuffer;
mTransferBuffer=0;
NS_RELEASE(mSink);
if(mCurrentPos)
delete mCurrentPos;
mCurrentPos=0;
if(mDTD)
NS_RELEASE(mDTD);
mDTD=0;
if(mScanner)
delete mScanner;
mScanner=0;
}
NS_IMPL_ADDREF(nsHTMLParser)
NS_IMPL_RELEASE(nsHTMLParser)
//NS_IMPL_ISUPPORTS(nsHTMLParser,NS_IHTML_PARSER_IID)
/**
* This method gets called as part of our COM-like interfaces.
* Its purpose is to create an interface to parser object
* of some type.
*
* @update gess 3/25/98
* @param nsIID id of object to discover
* @param aInstancePtr ptr to newly discovered interface
* @return NS_xxx result code
*/
nsresult nsHTMLParser::QueryInterface(const nsIID& aIID, void** aInstancePtr)
{
if (NULL == aInstancePtr) {
return NS_ERROR_NULL_POINTER;
}
if(aIID.Equals(kISupportsIID)) { //do IUnknown...
*aInstancePtr = (nsIParser*)(this);
}
else if(aIID.Equals(kIParserIID)) { //do IParser base class...
*aInstancePtr = (nsIParser*)(this);
}
else if(aIID.Equals(kClassIID)) { //do this class...
*aInstancePtr = (nsHTMLParser*)(this);
}
else {
*aInstancePtr=0;
return NS_NOINTERFACE;
}
((nsISupports*) *aInstancePtr)->AddRef();
return NS_OK;
}
nsIParserFilter * nsHTMLParser::SetParserFilter(nsIParserFilter * aFilter)
{
nsIParserFilter* old=mParserFilter;
if(old)
NS_RELEASE(old);
if(aFilter) {
mParserFilter=aFilter;
NS_ADDREF(aFilter);
}
return old;
}
/**
* This method gets called in order to set the content
* sink for this parser to dump nodes to.
*
* @update gess 3/25/98
* @param nsIContentSink interface for node receiver
* @return
*/
nsIContentSink* nsHTMLParser::SetContentSink(nsIContentSink* aSink) {
NS_PRECONDITION(0!=aSink,"sink cannot be null!");
nsIContentSink* old=mSink;
if(old)
NS_RELEASE(old);
if(aSink) {
mSink=aSink;
NS_ADDREF(aSink);
}
return old;
}
/**
*
*
* @update gess 6/9/98
* @param
* @return
*/
void nsHTMLParser::SetDTD(nsIDTD* aDTD) {
mDTD=aDTD;
}
nsIDTD * nsHTMLParser::GetDTD(void) {
return mDTD;
}
/**
*
*
* @update gess 6/9/98
* @param
* @return
*/
CScanner* nsHTMLParser::GetScanner(void){
return mScanner;
}
/**
* This is where we loop over the tokens created in the
* tokenization phase, and try to make sense out of them.
*
* @update gess 3/25/98
* @param
* @return PR_TRUE if parse succeeded, PR_FALSE otherwise.
*/
PRInt32 nsHTMLParser::IterateTokens() {
nsDequeIterator e=mTokenDeque.End();
nsDequeIterator theMarkPos(e);
if(!mCurrentPos)
mCurrentPos=new nsDequeIterator(mTokenDeque.Begin());
PRInt32 result=kNoError;
while((kNoError==result) && ((*mCurrentPos<e))){
mMinorIteration++;
CToken* theToken=(CToken*)mCurrentPos->GetCurrent();
theMarkPos=*mCurrentPos;
result=mDTD->HandleToken(theToken);
++(*mCurrentPos);
}
if(kInterrupted==result)
*mCurrentPos=theMarkPos;
return result;
}
/**
*
*
* @update gess 5/13/98
* @param
* @return
*/
eParseMode DetermineParseMode() {
const char* theModeStr= PR_GetEnv("PARSE_MODE");
const char* other="other";
eParseMode result=eParseMode_navigator;
if(theModeStr)
if(0==nsCRT::strcasecmp(other,theModeStr))
result=eParseMode_other;
return result;
}
/**
*
*
* @update gess 5/13/98
* @param
* @return
*/
nsIDTD* NewDTD(eParseMode aMode) {
nsIDTD* aDTD=0;
switch(aMode) {
case eParseMode_navigator:
aDTD=new CNavDTD(); break;
case eParseMode_other:
aDTD=new COtherDTD(); break;
default:
break;
}
if (aDTD)
aDTD->AddRef();
return aDTD;
}
/**
*
* @update gess5/18/98
* @param
* @return
*/
PRInt32 nsHTMLParser::WillBuildModel(void) {
mMajorIteration=-1;
mMinorIteration=-1;
if(mDTD)
mDTD->WillBuildModel();
#ifdef DEBUG_SAVE_SOURCE_DOC
#if defined(XP_UNIX) && defined(IRIX)
/* XXX: IRIX does not support ios::binary */
gTempStream =new fstream("c:/temp/out.html",ios::out);
#else
gTempStream = new fstream("c:/temp/out.html",ios::out|ios::binary);
#endif
#endif
return kNoError;
}
/**
*
* @update gess5/18/98
* @param
* @return
*/
PRInt32 nsHTMLParser::DidBuildModel(PRInt32 anErrorCode) {
//One last thing...close any open containers.
PRInt32 result=anErrorCode;
if(mDTD) {
result=mDTD->DidBuildModel(anErrorCode);
}
#ifdef DEBUG_SAVE_SOURCE_DOC
if(gTempStream) {
gTempStream->close();
delete gTempStream;
gTempStream=0;
}
#endif
return anErrorCode;
}
/**
* This DEBUG ONLY method is used to simulate a network-based
* i/o model where data comes in incrementally.
*
* @update gess 5/13/98
* @param aFilename is the name of the disk file to use for testing.
* @return error code (kNoError means ok)
*/
PRInt32 nsHTMLParser::ParseFileIncrementally(const char* aFilename){
PRInt32 result=kBadFilename;
fstream* theFileStream;
nsString theBuffer;
const int kLocalBufSize=10;
mMajorIteration=-1;
mMinorIteration=-1;
#if defined(XP_UNIX) && defined(IRIX)
/* XXX: IRIX does not support ios::binary */
theFileStream=new fstream(aFilename,ios::in);
#else
theFileStream=new fstream(aFilename,ios::in|ios::binary);
#endif
if(theFileStream) {
result=kNoError;
while((kNoError==result) || (kInterrupted==result)) {
//read some data from the file...
char buf[kLocalBufSize];
buf[kLocalBufSize]=0;
if(theFileStream) {
theFileStream->read(buf,kLocalBufSize);
PRInt32 numread=theFileStream->gcount();
if(numread>0) {
buf[numread]=0;
theBuffer.Truncate();
theBuffer.Append(buf);
mScanner->Append(theBuffer);
result=ResumeParse();
}
else break;
}
}
theFileStream->close();
delete theFileStream;
}
return result;
}
/**
* This is the main controlling routine in the parsing process.
* Note that it may get called multiple times for the same scanner,
* since this is a pushed based system, and all the tokens may
* not have been consumed by the scanner during a given invocation
* of this method.
*
* @update gess 3/25/98
* @param aFilename -- const char* containing file to be parsed.
* @return PR_TRUE if parse succeeded, PR_FALSE otherwise.
*/
PRBool nsHTMLParser::Parse(const char* aFilename,PRBool aIncremental, nsIParserDebug * aDebug){
NS_PRECONDITION(0!=aFilename,kNullFilename);
PRInt32 status=kBadFilename;
mIncremental=aIncremental;
if(aFilename) {
mParseMode=DetermineParseMode();
mDTD=(0==mDTD) ? NewDTD(mParseMode) : mDTD;
if(mDTD) {
mDTD->SetParser(this);
mDTD->SetContentSink(mSink);
mDTD->SetURLRef((char *)aFilename);
mDTD->SetParserDebug(aDebug);
}
WillBuildModel();
//ok, time to create our tokenizer and begin the process
if(aIncremental) {
mScanner=new CScanner(mParseMode);
status=ParseFileIncrementally(aFilename);
}
else {
//ok, time to create our tokenizer and begin the process
mScanner=new CScanner(aFilename,mParseMode);
status=ResumeParse();
}
DidBuildModel(status);
}
return status;
}
/**
* This is the main controlling routine in the parsing process.
* Note that it may get called multiple times for the same scanner,
* since this is a pushed based system, and all the tokens may
* not have been consumed by the scanner during a given invocation
* of this method.
*
* @update gess 3/25/98
* @param aFilename -- const char* containing file to be parsed.
* @return PR_TRUE if parse succeeded, PR_FALSE otherwise.
*/
PRInt32 nsHTMLParser::Parse(nsIURL* aURL,
nsIStreamListener* aListener,
PRBool aIncremental,
nsIParserDebug * aDebug) {
NS_PRECONDITION(0!=aURL,kNullURL);
PRInt32 status=kBadURL;
//set the rickGDebug flag to 1 if you want to try incrementally
//loading your document from a text file (given below).
static int rickGDebug=0;
if(rickGDebug)
return Parse("c:/temp/temp.html",PR_TRUE);
NS_IF_RELEASE(mListener);
mListener = aListener;
NS_IF_ADDREF(aListener);
mIncremental=aIncremental;
if(aURL) {
mParseMode=DetermineParseMode();
mDTD=(0==mDTD) ? NewDTD(mParseMode) : mDTD;
if(mDTD) {
mDTD->SetParser(this);
mDTD->SetContentSink(mSink);
mDTD->SetURLRef((char *)aURL->GetSpec());
mDTD->SetParserDebug(aDebug);
}
WillBuildModel();
//ok, time to create our tokenizer and begin the process
if(mIncremental) {
mScanner=new CScanner(mParseMode);
status=aURL->Open(this);
}
else {
mScanner=new CScanner(aURL,mParseMode);
WillBuildModel();
status=ResumeParse();
DidBuildModel(status);
}
}
return status;
}
/**
* Call this method if all you want to do is parse 1 string full of HTML text.
*
* @update gess5/11/98
* @param anHTMLString contains a string-full of real HTML
* @param appendTokens tells us whether we should insert tokens inline, or append them.
* @return TRUE if all went well -- FALSE otherwise
*/
PRInt32 nsHTMLParser::Parse(nsString& aSourceBuffer,PRBool appendTokens){
PRInt32 result=kNoError;
WillBuildModel();
mScanner->Append(aSourceBuffer);
result=ResumeParse();
DidBuildModel(result);
return result;
}
/**
* This routine is called to cause the parser to continue
* parsing it's underling stream. This call allows the
* parse process to happen in chunks, such as when the
* content is push based, and we need to parse in pieces.
*
* @update gess 3/25/98
* @param
* @return PR_TRUE if parsing concluded successfully.
*/
PRInt32 nsHTMLParser::ResumeParse() {
PRInt32 result=kNoError;
mDTD->WillResumeParse();
if(kNoError==result) {
result=Tokenize();
if(kInterrupted==result)
mDTD->WillInterruptParse();
IterateTokens();
}
return result;
}
/**
* Retrieve the attributes for this node, and add then into
* the node.
*
* @update gess4/22/98
* @param aNode is the node you want to collect attributes for
* @param aCount is the # of attributes you're expecting
* @return error code (should be 0)
*/
PRInt32 nsHTMLParser::CollectAttributes(nsCParserNode& aNode,PRInt32 aCount){
nsDequeIterator end=mTokenDeque.End();
int attr=0;
for(attr=0;attr<aCount;attr++) {
if(*mCurrentPos<end) {
CToken* tkn=(CToken*)(++(*mCurrentPos));
if(tkn){
if(eToken_attribute==eHTMLTokenTypes(tkn->GetTokenType())){
aNode.AddAttribute(tkn);
}
else (*mCurrentPos)--;
}
else return kInterrupted;
}
else return kInterrupted;
}
return kNoError;
}
/**
*
* @update gess4/22/98
* @param
* @return
*/
PRInt32 nsHTMLParser::CollectSkippedContent(nsCParserNode& aNode){
eHTMLTokenTypes subtype=eToken_attribute;
nsDequeIterator end=mTokenDeque.End();
PRInt32 count=0;
while((*mCurrentPos!=end) && (eToken_attribute==subtype)) {
CToken* tkn=(CToken*)(++(*mCurrentPos));
subtype=eHTMLTokenTypes(tkn->GetTokenType());
if(eToken_skippedcontent==subtype) {
aNode.SetSkippedContent(tkn);
count++;
}
else (*mCurrentPos)--;
}
return count;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult nsHTMLParser::GetBindInfo(void){
nsresult result=0;
return result;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult
nsHTMLParser::OnProgress(PRInt32 aProgress, PRInt32 aProgressMax,
const nsString& aMsg)
{
nsresult result=0;
if (nsnull != mListener) {
mListener->OnProgress(aProgress, aProgressMax, aMsg);
}
return result;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult nsHTMLParser::OnStartBinding(const char *aContentType){
if (nsnull != mListener) {
mListener->OnStartBinding(aContentType);
}
nsresult result=WillBuildModel();
if(!mTransferBuffer) {
mTransferBuffer=new char[gTransferBufferSize+1];
}
return result;
}
/**
*
*
* @update gess 5/12/98
* @param pIStream contains the input chars
* @param length is the number of bytes waiting input
* @return error code (usually 0)
*/
nsresult nsHTMLParser::OnDataAvailable(nsIInputStream *pIStream, PRInt32 length){
if (nsnull != mListener) {
mListener->OnDataAvailable(pIStream, length);
}
int len=0;
int offset=0;
do {
PRInt32 err;
len = pIStream->Read(&err, mTransferBuffer, 0, gTransferBufferSize);
if(len>0) {
#ifdef DEBUG_SAVE_SOURCE_DOC
if(gTempStream) {
gTempStream->write(mTransferBuffer,len);
}
#endif
if (mParserFilter)
mParserFilter->RawBuffer(mTransferBuffer, &len);
mScanner->Append(&mTransferBuffer[offset],len);
} //if
} while (len > 0);
nsresult result=ResumeParse();
return result;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult nsHTMLParser::OnStopBinding(PRInt32 status, const nsString& aMsg){
nsresult result=DidBuildModel(status);
if (nsnull != mListener) {
mListener->OnStopBinding(status, aMsg);
}
return result;
}
/*******************************************************************
Here comes the tokenization methods...
*******************************************************************/
/**
* Cause the tokenizer to consume the next token, and
* return an error result.
*
* @update gess 3/25/98
* @param anError -- ref to error code
* @return new token or null
*/
PRInt32 nsHTMLParser::ConsumeToken(CToken*& aToken) {
PRInt32 result=mDTD->ConsumeToken(aToken);
return result;
}
/**
* Part of the code sandwich, this gets called right before
* the tokenization process begins. The main reason for
* this call is to allow the delegate to do initialization.
*
* @update gess 3/25/98
* @param
* @return TRUE if it's ok to proceed
*/
PRBool nsHTMLParser::WillTokenize(PRBool aIncremental){
PRBool result=PR_TRUE;
return result;
}
/**
*
* @update gess 3/25/98
* @return TRUE if it's ok to proceed
*/
PRInt32 nsHTMLParser::Tokenize(nsString& aSourceBuffer,PRBool appendTokens){
CToken* theToken=0;
PRInt32 result=kNoError;
WillTokenize(PR_TRUE);
while(kNoError==result) {
result=ConsumeToken(theToken);
if(theToken && (kNoError==result)) {
#ifdef VERBOSE_DEBUG
theToken->DebugDumpToken(cout);
#endif
mTokenDeque.Push(theToken);
}
}
if(kEOF==result)
result=kNoError;
DidTokenize(PR_TRUE);
return result;
}
/**
* This is the primary control routine. It iteratively
* consumes tokens until an error occurs or you run out
* of data.
*
* @update gess 3/25/98
* @return error code
*/
PRInt32 nsHTMLParser::Tokenize(void) {
CToken* theToken=0;
PRInt32 result=kNoError;
PRBool done=(0==mMajorIteration) ? (!WillTokenize(PR_TRUE)) : PR_FALSE;
while((PR_FALSE==done) && (kNoError==result)) {
mScanner->Mark();
result=ConsumeToken(theToken);
if(kNoError==result) {
if(theToken) {
#ifdef VERBOSE_DEBUG
theToken->DebugDumpToken(cout);
#endif
mTokenDeque.Push(theToken);
}
}
else {
if(theToken)
delete theToken;
mScanner->RewindToMark();
}
}
if((PR_TRUE==done) && (kInterrupted!=result))
DidTokenize(PR_TRUE);
return result;
}
/**
* This is the tail-end of the code sandwich for the
* tokenization process. It gets called once tokenziation
* has completed.
*
* @update gess 3/25/98
* @param
* @return TRUE if all went well
*/
PRBool nsHTMLParser::DidTokenize(PRBool aIncremental) {
PRBool result=PR_TRUE;
#ifdef VERBOSE_DEBUG
DebugDumpTokens(cout);
#endif
return result;
}
/**
* This debug routine is used to cause the tokenizer to
* iterate its token list, asking each token to dump its
* contents to the given output stream.
*
* @update gess 3/25/98
* @param
* @return
*/
void nsHTMLParser::DebugDumpTokens(ostream& out) {
nsDequeIterator b=mTokenDeque.Begin();
nsDequeIterator e=mTokenDeque.End();
CToken* theToken;
while(b!=e) {
theToken=(CToken*)(b++);
theToken->DebugDumpToken(out);
}
}
/**
* This debug routine is used to cause the tokenizer to
* iterate its token list, asking each token to dump its
* contents to the given output stream.
*
* @update gess 3/25/98
* @param
* @return
*/
void nsHTMLParser::DebugDumpSource(ostream& out) {
nsDequeIterator b=mTokenDeque.Begin();
nsDequeIterator e=mTokenDeque.End();
CToken* theToken;
while(b!=e) {
theToken=(CToken*)(b++);
theToken->DebugDumpSource(out);
}
}

Просмотреть файл

@ -44,7 +44,6 @@
#include "prtypes.h" #include "prtypes.h"
#include "prio.h" #include "prio.h"
#include "plstr.h" #include "plstr.h"
#include "prstrm.h"
#include <fstream.h> #include <fstream.h>

Просмотреть файл

@ -1,867 +0,0 @@
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
//#define __INCREMENTAL 1
#include "nsHTMLParser.h"
#include "nsIContentSink.h"
#include "nsString.h"
#include "nsCRT.h"
#include "COtherDTD.h"
#include "CNavDTD.h"
#include "nsScanner.h"
#include "prenv.h" //this is here for debug reasons...
#include "plstr.h"
#include "prstrm.h"
#include <fstream.h>
#include "nsIInputStream.h"
#include "nsIParserFilter.h"
/* UNCOMMENT THIS IF STUFF STOPS WORKING...
#ifdef XP_PC
#include <direct.h> //this is here for debug reasons...
#endif
#include <time.h>
#include "prmem.h"
*/
static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID);
static NS_DEFINE_IID(kClassIID, NS_IHTML_PARSER_IID);
static NS_DEFINE_IID(kIParserIID, NS_IPARSER_IID);
static const char* kNullURL = "Error: Null URL given";
static const char* kNullFilename= "Error: Null filename given";
static const char* kNullTokenizer = "Error: Unable to construct tokenizer";
static const int gTransferBufferSize=4096; //size of the buffer used in moving data from iistream
//#define DEBUG_SAVE_SOURCE_DOC 1
#ifdef DEBUG_SAVE_SOURCE_DOC
fstream* gTempStream=0;
#endif
/**
* This method is defined in nsIParser. It is used to
* cause the COM-like construction of an nsHTMLParser.
*
* @update gess 3/25/98
* @param nsIParser** ptr to newly instantiated parser
* @return NS_xxx error result
*/
NS_HTMLPARS nsresult NS_NewHTMLParser(nsIParser** aInstancePtrResult)
{
nsHTMLParser *it = new nsHTMLParser();
if (it == 0) {
return NS_ERROR_OUT_OF_MEMORY;
}
return it->QueryInterface(kIParserIID, (void **) aInstancePtrResult);
}
class CTokenDeallocator: public nsDequeFunctor{
public:
virtual void operator()(void* anObject) {
CToken* aToken = (CToken*)anObject;
delete aToken;
}
};
CTokenDeallocator gTokenKiller;
/**
* default constructor
*
* @update gess 3/25/98
* @param
* @return
*/
nsHTMLParser::nsHTMLParser() : mTokenDeque(gTokenKiller) {
NS_INIT_REFCNT();
mParserFilter = nsnull;
mListener = nsnull;
mTransferBuffer=0;
mSink=0;
mCurrentPos=0;
mMarkPos=0;
mParseMode=eParseMode_unknown;
mDTD=0;
}
/**
* Default destructor
*
* @update gess 3/25/98
* @param
* @return
*/
nsHTMLParser::~nsHTMLParser() {
NS_IF_RELEASE(mListener);
if(mTransferBuffer)
delete [] mTransferBuffer;
mTransferBuffer=0;
NS_RELEASE(mSink);
if(mCurrentPos)
delete mCurrentPos;
mCurrentPos=0;
if(mDTD)
NS_RELEASE(mDTD);
mDTD=0;
if(mScanner)
delete mScanner;
mScanner=0;
}
NS_IMPL_ADDREF(nsHTMLParser)
NS_IMPL_RELEASE(nsHTMLParser)
//NS_IMPL_ISUPPORTS(nsHTMLParser,NS_IHTML_PARSER_IID)
/**
* This method gets called as part of our COM-like interfaces.
* Its purpose is to create an interface to parser object
* of some type.
*
* @update gess 3/25/98
* @param nsIID id of object to discover
* @param aInstancePtr ptr to newly discovered interface
* @return NS_xxx result code
*/
nsresult nsHTMLParser::QueryInterface(const nsIID& aIID, void** aInstancePtr)
{
if (NULL == aInstancePtr) {
return NS_ERROR_NULL_POINTER;
}
if(aIID.Equals(kISupportsIID)) { //do IUnknown...
*aInstancePtr = (nsIParser*)(this);
}
else if(aIID.Equals(kIParserIID)) { //do IParser base class...
*aInstancePtr = (nsIParser*)(this);
}
else if(aIID.Equals(kClassIID)) { //do this class...
*aInstancePtr = (nsHTMLParser*)(this);
}
else {
*aInstancePtr=0;
return NS_NOINTERFACE;
}
((nsISupports*) *aInstancePtr)->AddRef();
return NS_OK;
}
nsIParserFilter * nsHTMLParser::SetParserFilter(nsIParserFilter * aFilter)
{
nsIParserFilter* old=mParserFilter;
if(old)
NS_RELEASE(old);
if(aFilter) {
mParserFilter=aFilter;
NS_ADDREF(aFilter);
}
return old;
}
/**
* This method gets called in order to set the content
* sink for this parser to dump nodes to.
*
* @update gess 3/25/98
* @param nsIContentSink interface for node receiver
* @return
*/
nsIContentSink* nsHTMLParser::SetContentSink(nsIContentSink* aSink) {
NS_PRECONDITION(0!=aSink,"sink cannot be null!");
nsIContentSink* old=mSink;
if(old)
NS_RELEASE(old);
if(aSink) {
mSink=aSink;
NS_ADDREF(aSink);
}
return old;
}
/**
*
*
* @update gess 6/9/98
* @param
* @return
*/
void nsHTMLParser::SetDTD(nsIDTD* aDTD) {
mDTD=aDTD;
}
nsIDTD * nsHTMLParser::GetDTD(void) {
return mDTD;
}
/**
*
*
* @update gess 6/9/98
* @param
* @return
*/
CScanner* nsHTMLParser::GetScanner(void){
return mScanner;
}
/**
* This is where we loop over the tokens created in the
* tokenization phase, and try to make sense out of them.
*
* @update gess 3/25/98
* @param
* @return PR_TRUE if parse succeeded, PR_FALSE otherwise.
*/
PRInt32 nsHTMLParser::IterateTokens() {
nsDequeIterator e=mTokenDeque.End();
nsDequeIterator theMarkPos(e);
if(!mCurrentPos)
mCurrentPos=new nsDequeIterator(mTokenDeque.Begin());
PRInt32 result=kNoError;
while((kNoError==result) && ((*mCurrentPos<e))){
mMinorIteration++;
CToken* theToken=(CToken*)mCurrentPos->GetCurrent();
theMarkPos=*mCurrentPos;
result=mDTD->HandleToken(theToken);
++(*mCurrentPos);
}
if(kInterrupted==result)
*mCurrentPos=theMarkPos;
return result;
}
/**
*
*
* @update gess 5/13/98
* @param
* @return
*/
eParseMode DetermineParseMode() {
const char* theModeStr= PR_GetEnv("PARSE_MODE");
const char* other="other";
eParseMode result=eParseMode_navigator;
if(theModeStr)
if(0==nsCRT::strcasecmp(other,theModeStr))
result=eParseMode_other;
return result;
}
/**
*
*
* @update gess 5/13/98
* @param
* @return
*/
nsIDTD* NewDTD(eParseMode aMode) {
nsIDTD* aDTD=0;
switch(aMode) {
case eParseMode_navigator:
aDTD=new CNavDTD(); break;
case eParseMode_other:
aDTD=new COtherDTD(); break;
default:
break;
}
if (aDTD)
aDTD->AddRef();
return aDTD;
}
/**
*
* @update gess5/18/98
* @param
* @return
*/
PRInt32 nsHTMLParser::WillBuildModel(void) {
mMajorIteration=-1;
mMinorIteration=-1;
if(mDTD)
mDTD->WillBuildModel();
#ifdef DEBUG_SAVE_SOURCE_DOC
#if defined(XP_UNIX) && defined(IRIX)
/* XXX: IRIX does not support ios::binary */
gTempStream =new fstream("c:/temp/out.html",ios::out);
#else
gTempStream = new fstream("c:/temp/out.html",ios::out|ios::binary);
#endif
#endif
return kNoError;
}
/**
*
* @update gess5/18/98
* @param
* @return
*/
PRInt32 nsHTMLParser::DidBuildModel(PRInt32 anErrorCode) {
//One last thing...close any open containers.
PRInt32 result=anErrorCode;
if(mDTD) {
result=mDTD->DidBuildModel(anErrorCode);
}
#ifdef DEBUG_SAVE_SOURCE_DOC
if(gTempStream) {
gTempStream->close();
delete gTempStream;
gTempStream=0;
}
#endif
return anErrorCode;
}
/**
* This DEBUG ONLY method is used to simulate a network-based
* i/o model where data comes in incrementally.
*
* @update gess 5/13/98
* @param aFilename is the name of the disk file to use for testing.
* @return error code (kNoError means ok)
*/
PRInt32 nsHTMLParser::ParseFileIncrementally(const char* aFilename){
PRInt32 result=kBadFilename;
fstream* theFileStream;
nsString theBuffer;
const int kLocalBufSize=10;
mMajorIteration=-1;
mMinorIteration=-1;
#if defined(XP_UNIX) && defined(IRIX)
/* XXX: IRIX does not support ios::binary */
theFileStream=new fstream(aFilename,ios::in);
#else
theFileStream=new fstream(aFilename,ios::in|ios::binary);
#endif
if(theFileStream) {
result=kNoError;
while((kNoError==result) || (kInterrupted==result)) {
//read some data from the file...
char buf[kLocalBufSize];
buf[kLocalBufSize]=0;
if(theFileStream) {
theFileStream->read(buf,kLocalBufSize);
PRInt32 numread=theFileStream->gcount();
if(numread>0) {
buf[numread]=0;
theBuffer.Truncate();
theBuffer.Append(buf);
mScanner->Append(theBuffer);
result=ResumeParse();
}
else break;
}
}
theFileStream->close();
delete theFileStream;
}
return result;
}
/**
* This is the main controlling routine in the parsing process.
* Note that it may get called multiple times for the same scanner,
* since this is a pushed based system, and all the tokens may
* not have been consumed by the scanner during a given invocation
* of this method.
*
* @update gess 3/25/98
* @param aFilename -- const char* containing file to be parsed.
* @return PR_TRUE if parse succeeded, PR_FALSE otherwise.
*/
PRBool nsHTMLParser::Parse(const char* aFilename,PRBool aIncremental, nsIParserDebug * aDebug){
NS_PRECONDITION(0!=aFilename,kNullFilename);
PRInt32 status=kBadFilename;
mIncremental=aIncremental;
if(aFilename) {
mParseMode=DetermineParseMode();
mDTD=(0==mDTD) ? NewDTD(mParseMode) : mDTD;
if(mDTD) {
mDTD->SetParser(this);
mDTD->SetContentSink(mSink);
mDTD->SetURLRef((char *)aFilename);
mDTD->SetParserDebug(aDebug);
}
WillBuildModel();
//ok, time to create our tokenizer and begin the process
if(aIncremental) {
mScanner=new CScanner(mParseMode);
status=ParseFileIncrementally(aFilename);
}
else {
//ok, time to create our tokenizer and begin the process
mScanner=new CScanner(aFilename,mParseMode);
status=ResumeParse();
}
DidBuildModel(status);
}
return status;
}
/**
* This is the main controlling routine in the parsing process.
* Note that it may get called multiple times for the same scanner,
* since this is a pushed based system, and all the tokens may
* not have been consumed by the scanner during a given invocation
* of this method.
*
* @update gess 3/25/98
* @param aFilename -- const char* containing file to be parsed.
* @return PR_TRUE if parse succeeded, PR_FALSE otherwise.
*/
PRInt32 nsHTMLParser::Parse(nsIURL* aURL,
nsIStreamListener* aListener,
PRBool aIncremental,
nsIParserDebug * aDebug) {
NS_PRECONDITION(0!=aURL,kNullURL);
PRInt32 status=kBadURL;
//set the rickGDebug flag to 1 if you want to try incrementally
//loading your document from a text file (given below).
static int rickGDebug=0;
if(rickGDebug)
return Parse("c:/temp/temp.html",PR_TRUE);
NS_IF_RELEASE(mListener);
mListener = aListener;
NS_IF_ADDREF(aListener);
mIncremental=aIncremental;
if(aURL) {
mParseMode=DetermineParseMode();
mDTD=(0==mDTD) ? NewDTD(mParseMode) : mDTD;
if(mDTD) {
mDTD->SetParser(this);
mDTD->SetContentSink(mSink);
mDTD->SetURLRef((char *)aURL->GetSpec());
mDTD->SetParserDebug(aDebug);
}
WillBuildModel();
//ok, time to create our tokenizer and begin the process
if(mIncremental) {
mScanner=new CScanner(mParseMode);
status=aURL->Open(this);
}
else {
mScanner=new CScanner(aURL,mParseMode);
WillBuildModel();
status=ResumeParse();
DidBuildModel(status);
}
}
return status;
}
/**
* Call this method if all you want to do is parse 1 string full of HTML text.
*
* @update gess5/11/98
* @param anHTMLString contains a string-full of real HTML
* @param appendTokens tells us whether we should insert tokens inline, or append them.
* @return TRUE if all went well -- FALSE otherwise
*/
PRInt32 nsHTMLParser::Parse(nsString& aSourceBuffer,PRBool appendTokens){
PRInt32 result=kNoError;
WillBuildModel();
mScanner->Append(aSourceBuffer);
result=ResumeParse();
DidBuildModel(result);
return result;
}
/**
* This routine is called to cause the parser to continue
* parsing it's underling stream. This call allows the
* parse process to happen in chunks, such as when the
* content is push based, and we need to parse in pieces.
*
* @update gess 3/25/98
* @param
* @return PR_TRUE if parsing concluded successfully.
*/
PRInt32 nsHTMLParser::ResumeParse() {
PRInt32 result=kNoError;
mDTD->WillResumeParse();
if(kNoError==result) {
result=Tokenize();
if(kInterrupted==result)
mDTD->WillInterruptParse();
IterateTokens();
}
return result;
}
/**
* Retrieve the attributes for this node, and add then into
* the node.
*
* @update gess4/22/98
* @param aNode is the node you want to collect attributes for
* @param aCount is the # of attributes you're expecting
* @return error code (should be 0)
*/
PRInt32 nsHTMLParser::CollectAttributes(nsCParserNode& aNode,PRInt32 aCount){
nsDequeIterator end=mTokenDeque.End();
int attr=0;
for(attr=0;attr<aCount;attr++) {
if(*mCurrentPos<end) {
CToken* tkn=(CToken*)(++(*mCurrentPos));
if(tkn){
if(eToken_attribute==eHTMLTokenTypes(tkn->GetTokenType())){
aNode.AddAttribute(tkn);
}
else (*mCurrentPos)--;
}
else return kInterrupted;
}
else return kInterrupted;
}
return kNoError;
}
/**
*
* @update gess4/22/98
* @param
* @return
*/
PRInt32 nsHTMLParser::CollectSkippedContent(nsCParserNode& aNode){
eHTMLTokenTypes subtype=eToken_attribute;
nsDequeIterator end=mTokenDeque.End();
PRInt32 count=0;
while((*mCurrentPos!=end) && (eToken_attribute==subtype)) {
CToken* tkn=(CToken*)(++(*mCurrentPos));
subtype=eHTMLTokenTypes(tkn->GetTokenType());
if(eToken_skippedcontent==subtype) {
aNode.SetSkippedContent(tkn);
count++;
}
else (*mCurrentPos)--;
}
return count;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult nsHTMLParser::GetBindInfo(void){
nsresult result=0;
return result;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult
nsHTMLParser::OnProgress(PRInt32 aProgress, PRInt32 aProgressMax,
const nsString& aMsg)
{
nsresult result=0;
if (nsnull != mListener) {
mListener->OnProgress(aProgress, aProgressMax, aMsg);
}
return result;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult nsHTMLParser::OnStartBinding(const char *aContentType){
if (nsnull != mListener) {
mListener->OnStartBinding(aContentType);
}
nsresult result=WillBuildModel();
if(!mTransferBuffer) {
mTransferBuffer=new char[gTransferBufferSize+1];
}
return result;
}
/**
*
*
* @update gess 5/12/98
* @param pIStream contains the input chars
* @param length is the number of bytes waiting input
* @return error code (usually 0)
*/
nsresult nsHTMLParser::OnDataAvailable(nsIInputStream *pIStream, PRInt32 length){
if (nsnull != mListener) {
mListener->OnDataAvailable(pIStream, length);
}
int len=0;
int offset=0;
do {
PRInt32 err;
len = pIStream->Read(&err, mTransferBuffer, 0, gTransferBufferSize);
if(len>0) {
#ifdef DEBUG_SAVE_SOURCE_DOC
if(gTempStream) {
gTempStream->write(mTransferBuffer,len);
}
#endif
if (mParserFilter)
mParserFilter->RawBuffer(mTransferBuffer, &len);
mScanner->Append(&mTransferBuffer[offset],len);
} //if
} while (len > 0);
nsresult result=ResumeParse();
return result;
}
/**
*
*
* @update gess 5/12/98
* @param
* @return
*/
nsresult nsHTMLParser::OnStopBinding(PRInt32 status, const nsString& aMsg){
nsresult result=DidBuildModel(status);
if (nsnull != mListener) {
mListener->OnStopBinding(status, aMsg);
}
return result;
}
/*******************************************************************
Here comes the tokenization methods...
*******************************************************************/
/**
* Cause the tokenizer to consume the next token, and
* return an error result.
*
* @update gess 3/25/98
* @param anError -- ref to error code
* @return new token or null
*/
PRInt32 nsHTMLParser::ConsumeToken(CToken*& aToken) {
PRInt32 result=mDTD->ConsumeToken(aToken);
return result;
}
/**
* Part of the code sandwich, this gets called right before
* the tokenization process begins. The main reason for
* this call is to allow the delegate to do initialization.
*
* @update gess 3/25/98
* @param
* @return TRUE if it's ok to proceed
*/
PRBool nsHTMLParser::WillTokenize(PRBool aIncremental){
PRBool result=PR_TRUE;
return result;
}
/**
*
* @update gess 3/25/98
* @return TRUE if it's ok to proceed
*/
PRInt32 nsHTMLParser::Tokenize(nsString& aSourceBuffer,PRBool appendTokens){
CToken* theToken=0;
PRInt32 result=kNoError;
WillTokenize(PR_TRUE);
while(kNoError==result) {
result=ConsumeToken(theToken);
if(theToken && (kNoError==result)) {
#ifdef VERBOSE_DEBUG
theToken->DebugDumpToken(cout);
#endif
mTokenDeque.Push(theToken);
}
}
if(kEOF==result)
result=kNoError;
DidTokenize(PR_TRUE);
return result;
}
/**
* This is the primary control routine. It iteratively
* consumes tokens until an error occurs or you run out
* of data.
*
* @update gess 3/25/98
* @return error code
*/
PRInt32 nsHTMLParser::Tokenize(void) {
CToken* theToken=0;
PRInt32 result=kNoError;
PRBool done=(0==mMajorIteration) ? (!WillTokenize(PR_TRUE)) : PR_FALSE;
while((PR_FALSE==done) && (kNoError==result)) {
mScanner->Mark();
result=ConsumeToken(theToken);
if(kNoError==result) {
if(theToken) {
#ifdef VERBOSE_DEBUG
theToken->DebugDumpToken(cout);
#endif
mTokenDeque.Push(theToken);
}
}
else {
if(theToken)
delete theToken;
mScanner->RewindToMark();
}
}
if((PR_TRUE==done) && (kInterrupted!=result))
DidTokenize(PR_TRUE);
return result;
}
/**
* This is the tail-end of the code sandwich for the
* tokenization process. It gets called once tokenziation
* has completed.
*
* @update gess 3/25/98
* @param
* @return TRUE if all went well
*/
PRBool nsHTMLParser::DidTokenize(PRBool aIncremental) {
PRBool result=PR_TRUE;
#ifdef VERBOSE_DEBUG
DebugDumpTokens(cout);
#endif
return result;
}
/**
* This debug routine is used to cause the tokenizer to
* iterate its token list, asking each token to dump its
* contents to the given output stream.
*
* @update gess 3/25/98
* @param
* @return
*/
void nsHTMLParser::DebugDumpTokens(ostream& out) {
nsDequeIterator b=mTokenDeque.Begin();
nsDequeIterator e=mTokenDeque.End();
CToken* theToken;
while(b!=e) {
theToken=(CToken*)(b++);
theToken->DebugDumpToken(out);
}
}
/**
* This debug routine is used to cause the tokenizer to
* iterate its token list, asking each token to dump its
* contents to the given output stream.
*
* @update gess 3/25/98
* @param
* @return
*/
void nsHTMLParser::DebugDumpSource(ostream& out) {
nsDequeIterator b=mTokenDeque.Begin();
nsDequeIterator e=mTokenDeque.End();
CToken* theToken;
while(b!=e) {
theToken=(CToken*)(b++);
theToken->DebugDumpSource(out);
}
}