adding new files on trunk before committing them on the branch, these files

are not build on the trunk (yet). a=chofmann, bug 86323
This commit is contained in:
cltbld%netscape.com 2001-06-26 21:50:30 +00:00
Родитель 62ccbbf1f3
Коммит e08feedd82
5 изменённых файлов: 895 добавлений и 0 удалений

471
modules/zlib/src/ChangeLog Normal file
Просмотреть файл

@ -0,0 +1,471 @@
ChangeLog file for zlib
Changes in 1.1.3 (9 July 1998)
- fix "an inflate input buffer bug that shows up on rare but persistent
occasions" (Mark)
- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
- fix gzseek(..., SEEK_SET) in write mode
- fix crc check after a gzeek (Frank Faubert)
- fix miniunzip when the last entry in a zip file is itself a zip file
(J Lillge)
- add contrib/asm586 and contrib/asm686 (Brian Raiter)
See http://www.muppetlabs.com/~breadbox/software/assembly.html
- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
- added a FAQ file
- Support gzdopen on Mac with Metrowerks (Jason Linhart)
- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
- avoid some warnings with Borland C (Tom Tanner)
- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
- use libdir and includedir in Makefile.in (Tim Mooney)
- support shared libraries on OSF1 V4 (Tim Mooney)
- remove so_locations in "make clean" (Tim Mooney)
- fix maketree.c compilation error (Glenn, Mark)
- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
- new Makefile.riscos (Rich Walker)
- initialize static descriptors in trees.c for embedded targets (Nick Smith)
- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
- fix maketree.c to allow clean compilation of inffixed.h (Mark)
- fix parameter check in deflateCopy (Gunther Nikl)
- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
- Many portability patches by Christian Spieler:
. zutil.c, zutil.h: added "const" for zmem*
. Make_vms.com: fixed some typos
. Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
. msdos/Makefile.msc: remove "default rtl link library" info from obj files
. msdos/Makefile.*: use model-dependent name for the built zlib library
. msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
- replace __far with _far for better portability (Christian Spieler, Tom Lane)
- fix test for errno.h in configure (Tim Newsham)
Changes in 1.1.2 (19 March 98)
- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
See http://www.winimage.com/zLibDll/unzip.html
- preinitialize the inflate tables for fixed codes, to make the code
completely thread safe (Mark)
- some simplifications and slight speed-up to the inflate code (Mark)
- fix gzeof on non-compressed files (Allan Schrum)
- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
- do not wrap extern "C" around system includes (Tom Lane)
- mention zlib binding for TCL in README (Andreas Kupries)
- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
- allow "configure --prefix $HOME" (Tim Mooney)
- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
- move Makefile.sas to amiga/Makefile.sas
Changes in 1.1.1 (27 Feb 98)
- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
- remove block truncation heuristic which had very marginal effect for zlib
(smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
compression ratio on some files. This also allows inlining _tr_tally for
matches in deflate_slow.
- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
Changes in 1.1.0 (24 Feb 98)
- do not return STREAM_END prematurely in inflate (John Bowler)
- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
- compile with -DFASTEST to get compression code optimized for speed only
- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
on Sun but significant on HP)
- add a pointer to experimental unzip library in README (Gilles Vollant)
- initialize variable gcc in configure (Chris Herborth)
Changes in 1.0.9 (17 Feb 1998)
- added gzputs and gzgets functions
- do not clear eof flag in gzseek (Mark Diekhans)
- fix gzseek for files in transparent mode (Mark Diekhans)
- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
- replace EXPORT with ZEXPORT to avoid conflict with other programs
- added compress2 in zconf.h, zlib.def, zlib.dnt
- new asm code from Gilles Vollant in contrib/asm386
- simplify the inflate code (Mark):
. Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
. ZALLOC the length list in inflate_trees_fixed() instead of using stack
. ZALLOC the value area for huft_build() instead of using stack
. Simplify Z_FINISH check in inflate()
- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
the declaration of FAR (Gilles VOllant)
- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
- read_buf buf parameter of type Bytef* instead of charf*
- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
- fix check for presence of directories in "make install" (Ian Willis)
Changes in 1.0.8 (27 Jan 1998)
- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
- added compress2() to allow setting the compression level
- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
- use constant arrays for the static trees in trees.c instead of computing
them at run time (thanks to Ken Raeburn for this suggestion). To create
trees.h, compile with GEN_TREES_H and run "make test".
- check return code of example in "make test" and display result
- pass minigzip command line options to file_compress
- simplifying code of inflateSync to avoid gcc 2.8 bug
- support CC="gcc -Wall" in configure -s (QingLong)
- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
- fix test for shared library support to avoid compiler warnings
- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
- do not use fdopen for Metrowerks on Mac (Brad Pettit))
- add checks for gzputc and gzputc in example.c
- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
- use const for the CRC table (Ken Raeburn)
- fixed "make uninstall" for shared libraries
- use Tracev instead of Trace in infblock.c
- in example.c use correct compressed length for test_sync
- suppress +vnocompatwarnings in configure for HPUX (not always supported)
Changes in 1.0.7 (20 Jan 1998)
- fix gzseek which was broken in write mode
- return error for gzseek to negative absolute position
- fix configure for Linux (Chun-Chung Chen)
- increase stack space for MSC (Tim Wegner)
- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
- define EXPORTVA for gzprintf (Gilles Vollant)
- added man page zlib.3 (Rick Rodgers)
- for contrib/untgz, fix makedir() and improve Makefile
- check gzseek in write mode in example.c
- allocate extra buffer for seeks only if gzseek is actually called
- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
- add inflateSyncPoint in zconf.h
- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
- Fix a deflate bug occuring only with compression level 0 (thanks to
Andy Buckler for finding this one).
- In minigzip, pass transparently also the first byte for .Z files.
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
- check Z_FINISH in inflate (thanks to Marc Schluper)
- Implement deflateCopy (thanks to Adam Costello)
- make static libraries by default in configure, add --shared option.
- move MSDOS or Windows specific files to directory msdos
- suppress the notion of partial flush to simplify the interface
(but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
- suppress history buffer provided by application to simplify the interface
(this feature was not implemented anyway in 1.0.4)
- next_in and avail_in must be initialized before calling inflateInit or
inflateInit2
- add EXPORT in all exported functions (for Windows DLL)
- added Makefile.nt (thanks to Stephen Williams)
- added the unsupported "contrib" directory:
contrib/asm386/ by Gilles Vollant <info@winimage.com>
386 asm code replacing longest_match().
contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
A C++ I/O streams interface to the zlib gz* functions
contrib/iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
Another C++ I/O streams interface
contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
A very simple tar.gz file extractor using zlib
contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
How to use compress(), uncompress() and the gz* functions from VB.
- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
level) in minigzip (thanks to Tom Lane)
- use const for rommable constants in deflate
- added test for gzseek and gztell in example.c
- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
- add undocumented function zError to convert error code to string
(for Tim Smithers)
- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
- Use default memcpy for Symantec MSDOS compiler.
- Add EXPORT keyword for check_func (needed for Windows DLL)
- add current directory to LD_LIBRARY_PATH for "make test"
- create also a link for libz.so.1
- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
- added -soname for Linux in configure (Chun-Chung Chen,
- assign numbers to the exported functions in zlib.def (for Windows DLL)
- add advice in zlib.h for best usage of deflateSetDictionary
- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
- allow compilation with ANSI keywords only enabled for TurboC in large model
- avoid "versionString"[0] (Borland bug)
- add NEED_DUMMY_RETURN for Borland
- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
- allow compilation with CC
- defined STDC for OS/2 (David Charlap)
- limit external names to 8 chars for MVS (Thomas Lund)
- in minigzip.c, use static buffers only for 16-bit systems
- fix suffix check for "minigzip -d foo.gz"
- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
- added makelcc.bat for lcc-win32 (Tom St Denis)
- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
- Avoid expanded $Id: ChangeLog,v 1.1 2001-06-26 21:50:27 cltbld%netscape.com Exp $. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
- check for unistd.h in configure (for off_t)
- remove useless check parameter in inflate_blocks_free
- avoid useless assignment of s->check to itself in inflate_blocks_new
- do not flush twice in gzclose (thanks to Ken Raeburn)
- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
- work around buggy fclose on pipes for HP/UX
- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
- fix configure if CC is already equal to gcc
Changes in 1.0.5 (3 Jan 98)
- Fix inflate to terminate gracefully when fed corrupted or invalid data
- Use const for rommable constants in inflate
- Eliminate memory leaks on error conditions in inflate
- Removed some vestigial code in inflate
- Update web address in README
Changes in 1.0.4 (24 Jul 96)
- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
bit, so the decompressor could decompress all the correct data but went
on to attempt decompressing extra garbage data. This affected minigzip too.
- zlibVersion and gzerror return const char* (needed for DLL)
- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
- use z_error only for DEBUG (avoid problem with DLLs)
Changes in 1.0.3 (2 Jul 96)
- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
small and medium models; this makes the library incompatible with previous
versions for these models. (No effect in large model or on other systems.)
- return OK instead of BUF_ERROR if previous deflate call returned with
avail_out as zero but there is nothing to do
- added memcmp for non STDC compilers
- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
- better check for 16-bit mode MSC (avoids problem with Symantec)
Changes in 1.0.2 (23 May 96)
- added Windows DLL support
- added a function zlibVersion (for the DLL support)
- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
- Bytef is define's instead of typedef'd only for Borland C
- avoid reading uninitialized memory in example.c
- mention in README that the zlib format is now RFC1950
- updated Makefile.dj2
- added algorithm.doc
Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
- fix array overlay in deflate.c which sometimes caused bad compressed data
- fix inflate bug with empty stored block
- fix MSDOS medium model which was broken in 0.99
- fix deflateParams() which could generated bad compressed data.
- Bytef is define'd instead of typedef'ed (work around Borland bug)
- added an INDEX file
- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
- speed up adler32 for modern machines without auto-increment
- added -ansi for IRIX in configure
- static_init_done in trees.c is an int
- define unlink as delete for VMS
- fix configure for QNX
- add configure branch for SCO and HPUX
- avoid many warnings (unused variables, dead assignments, etc...)
- no fdopen for BeOS
- fix the Watcom fix for 32 bit mode (define FAR as empty)
- removed redefinition of Byte for MKWERKS
- work around an MWKERKS bug (incorrect merge of all .h files)
Changes in 0.99 (27 Jan 96)
- allow preset dictionary shared between compressor and decompressor
- allow compression level 0 (no compression)
- add deflateParams in zlib.h: allow dynamic change of compression level
and compression strategy.
- test large buffers and deflateParams in example.c
- add optional "configure" to build zlib as a shared library
- suppress Makefile.qnx, use configure instead
- fixed deflate for 64-bit systems (detected on Cray)
- fixed inflate_blocks for 64-bit systems (detected on Alpha)
- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
- always return Z_BUF_ERROR when deflate() has nothing to do
- deflateInit and inflateInit are now macros to allow version checking
- prefix all global functions and types with z_ with -DZ_PREFIX
- make falloc completely reentrant (inftrees.c)
- fixed very unlikely race condition in ct_static_init
- free in reverse order of allocation to help memory manager
- use zlib-1.0/* instead of zlib/* inside the tar.gz
- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
-Wconversion -Wstrict-prototypes -Wmissing-prototypes"
- allow gzread on concatenated .gz files
- deflateEnd now returns Z_DATA_ERROR if it was premature
- deflate is finally (?) fully deterministic (no matches beyond end of input)
- Document Z_SYNC_FLUSH
- add uninstall in Makefile
- Check for __cpluplus in zlib.h
- Better test in ct_align for partial flush
- avoid harmless warnings for Borland C++
- initialize hash_head in deflate.c
- avoid warning on fdopen (gzio.c) for HP cc -Aa
- include stdlib.h for STDC compilers
- include errno.h for Cray
- ignore error if ranlib doesn't exist
- call ranlib twice for NeXTSTEP
- use exec_prefix instead of prefix for libz.a
- renamed ct_* as _tr_* to avoid conflict with applications
- clear z->msg in inflateInit2 before any error return
- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
- fixed typo in zconf.h (_GNUC__ => __GNUC__)
- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
- in fcalloc, normalize pointer if size > 65520 bytes
- don't use special fcalloc for 32 bit Borland C++
- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
- use Z_BINARY instead of BINARY
- document that gzclose after gzdopen will close the file
- allow "a" as mode in gzopen.
- fix error checking in gzread
- allow skipping .gz extra-field on pipes
- added reference to Perl interface in README
- put the crc table in FAR data (I dislike more and more the medium model :)
- added get_crc_table
- added a dimension to all arrays (Borland C can't count).
- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
- guard against multiple inclusion of *.h (for precompiled header on Mac)
- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
- don't use unsized arrays to avoid silly warnings by Visual C++:
warning C4746: 'inflate_mask' : unsized array treated as '__far'
(what's wrong with far data in far model?).
- define enum out of inflate_blocks_state to allow compilation with C++
Changes in 0.95 (16 Aug 95)
- fix MSDOS small and medium model (now easier to adapt to any compiler)
- inlined send_bits
- fix the final (:-) bug for deflate with flush (output was correct but
not completely flushed in rare occasions).
- default window size is same for compression and decompression
(it's now sufficient to set MAX_WBITS in zconf.h).
- voidp -> voidpf and voidnp -> voidp (for consistency with other
typedefs and because voidnp was not near in large model).
Changes in 0.94 (13 Aug 95)
- support MSDOS medium model
- fix deflate with flush (could sometimes generate bad output)
- fix deflateReset (zlib header was incorrectly suppressed)
- added support for VMS
- allow a compression level in gzopen()
- gzflush now calls fflush
- For deflate with flush, flush even if no more input is provided.
- rename libgz.a as libz.a
- avoid complex expression in infcodes.c triggering Turbo C bug
- work around a problem with gcc on Alpha (in INSERT_STRING)
- don't use inline functions (problem with some gcc versions)
- allow renaming of Byte, uInt, etc... with #define.
- avoid warning about (unused) pointer before start of array in deflate.c
- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
- avoid reserved word 'new' in trees.c
Changes in 0.93 (25 June 95)
- temporarily disable inline functions
- make deflate deterministic
- give enough lookahead for PARTIAL_FLUSH
- Set binary mode for stdin/stdout in minigzip.c for OS/2
- don't even use signed char in inflate (not portable enough)
- fix inflate memory leak for segmented architectures
Changes in 0.92 (3 May 95)
- don't assume that char is signed (problem on SGI)
- Clear bit buffer when starting a stored block
- no memcpy on Pyramid
- suppressed inftest.c
- optimized fill_window, put longest_match inline for gcc
- optimized inflate on stored blocks.
- untabify all sources to simplify patches
Changes in 0.91 (2 May 95)
- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
- Document the memory requirements in zconf.h
- added "make install"
- fix sync search logic in inflateSync
- deflate(Z_FULL_FLUSH) now works even if output buffer too short
- after inflateSync, don't scare people with just "lo world"
- added support for DJGPP
Changes in 0.9 (1 May 95)
- don't assume that zalloc clears the allocated memory (the TurboC bug
was Mark's bug after all :)
- let again gzread copy uncompressed data unchanged (was working in 0.71)
- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
- added a test of inflateSync in example.c
- moved MAX_WBITS to zconf.h because users might want to change that.
- document explicitly that zalloc(64K) on MSDOS must return a normalized
pointer (zero offset)
- added Makefiles for Microsoft C, Turbo C, Borland C++
- faster crc32()
Changes in 0.8 (29 April 95)
- added fast inflate (inffast.c)
- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
is incompatible with previous versions of zlib which returned Z_OK.
- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
(actually that was not a compiler bug, see 0.81 above)
- gzread no longer reads one extra byte in certain cases
- In gzio destroy(), don't reference a freed structure
- avoid many warnings for MSDOS
- avoid the ERROR symbol which is used by MS Windows
Changes in 0.71 (14 April 95)
- Fixed more MSDOS compilation problems :( There is still a bug with
TurboC large model.
Changes in 0.7 (14 April 95)
- Added full inflate support.
- Simplified the crc32() interface. The pre- and post-conditioning
(one's complement) is now done inside crc32(). WARNING: this is
incompatible with previous versions; see zlib.h for the new usage.
Changes in 0.61 (12 April 95)
- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
Changes in 0.6 (11 April 95)
- added minigzip.c
- added gzdopen to reopen a file descriptor as gzFile
- added transparent reading of non-gziped files in gzread.
- fixed bug in gzread (don't read crc as data)
- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
- don't allocate big arrays in the stack (for MSDOS)
- fix some MSDOS compilation problems
Changes in 0.5:
- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
not yet Z_FULL_FLUSH.
- support decompression but only in a single step (forced Z_FINISH)
- added opaque object for zalloc and zfree.
- added deflateReset and inflateReset
- added a variable zlib_version for consistency checking.
- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
Changes in 0.4:
- avoid "zip" everywhere, use zlib instead of ziplib.
- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
if compression method == 8.
- added adler32 and crc32
- renamed deflateOptions as deflateInit2, call one or the other but not both
- added the method parameter for deflateInit2.
- added inflateInit2
- simplied considerably deflateInit and inflateInit by not supporting
user-provided history buffer. This is supported only in deflateInit2
and inflateInit2.
Changes in 0.3:
- prefix all macro names with Z_
- use Z_FINISH instead of deflateEnd to finish compression.
- added Z_HUFFMAN_ONLY
- added gzerror()

151
modules/zlib/src/inffixed.h Normal file
Просмотреть файл

@ -0,0 +1,151 @@
/* inffixed.h -- table for decoding fixed codes
* Generated automatically by the maketree.c program
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
local uInt fixed_bl = 9;
local uInt fixed_bd = 5;
local inflate_huft fixed_tl[] = {
{{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
{{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
{{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
{{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
{{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
{{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
{{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
{{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
{{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
{{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
{{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
{{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
{{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
{{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
{{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
{{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
{{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
{{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
{{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
{{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
{{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
{{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
{{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
{{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
{{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
{{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
{{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
{{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
{{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
{{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
{{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
{{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
{{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
{{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
{{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
{{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
{{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
{{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
{{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
{{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
{{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
{{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
{{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
{{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
{{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
{{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
{{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
{{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
{{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
{{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
{{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
{{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
{{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
{{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
{{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
{{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
{{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
{{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
{{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
{{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
{{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
{{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
{{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
{{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
{{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
{{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
{{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
{{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
{{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
{{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
{{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
{{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
{{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
{{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
{{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
{{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
{{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
{{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
{{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
{{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
{{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
{{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
{{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
{{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
{{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
{{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
{{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
{{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
{{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
{{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
{{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
{{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
{{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
{{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
{{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
{{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
{{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
{{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
{{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
{{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
{{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
{{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
{{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
{{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
{{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
{{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
{{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
{{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
{{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
{{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
{{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
{{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
{{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
{{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
{{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
{{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
{{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
{{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
{{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
{{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
{{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
{{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
{{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
{{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
{{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
{{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
{{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
{{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
};
local inflate_huft fixed_td[] = {
{{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
{{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
{{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
{{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
{{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
{{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
{{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
{{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
};

Просмотреть файл

@ -0,0 +1,85 @@
/* maketree.c -- make inffixed.h table for decoding fixed codes
* Copyright (C) 1998 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
/* This program is included in the distribution for completeness.
You do not need to compile or run this program since inffixed.h
is already included in the distribution. To use this program
you need to compile zlib with BUILDFIXED defined and then compile
and link this program with the zlib library. Then the output of
this program can be piped to inffixed.h. */
#include <stdio.h>
#include <stdlib.h>
#include "zutil.h"
#include "inftrees.h"
/* simplify the use of the inflate_huft type with some defines */
#define exop word.what.Exop
#define bits word.what.Bits
/* generate initialization table for an inflate_huft structure array */
void maketree(uInt b, inflate_huft *t)
{
int i, e;
i = 0;
while (1)
{
e = t[i].exop;
if (e && (e & (16+64)) == 0) /* table pointer */
{
fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
exit(1);
}
if (i % 4 == 0)
printf("\n ");
printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
if (++i == (1<<b))
break;
putchar(',');
}
puts("");
}
/* create the fixed tables in C initialization syntax */
void main(void)
{
int r;
uInt bl, bd;
inflate_huft *tl, *td;
z_stream z;
z.zalloc = zcalloc;
z.opaque = (voidpf)0;
z.zfree = zcfree;
r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
if (r)
{
fprintf(stderr, "inflate_trees_fixed error %d\n", r);
return;
}
puts("/* inffixed.h -- table for decoding fixed codes");
puts(" * Generated automatically by the maketree.c program");
puts(" */");
puts("");
puts("/* WARNING: this file should *not* be used by applications. It is");
puts(" part of the implementation of the compression library and is");
puts(" subject to change. Applications should only use zlib.h.");
puts(" */");
puts("");
printf("local uInt fixed_bl = %d;\n", bl);
printf("local uInt fixed_bd = %d;\n", bd);
printf("local inflate_huft fixed_tl[] = {");
maketree(bl, tl);
puts(" };");
printf("local inflate_huft fixed_td[] = {");
maketree(bd, td);
puts(" };");
}

128
modules/zlib/src/trees.h Normal file
Просмотреть файл

@ -0,0 +1,128 @@
/* header created automatically with -DGEN_TREES_H */
local const ct_data static_ltree[L_CODES+2] = {
{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}},
{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}},
{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}},
{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}},
{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}},
{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}},
{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}},
{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}},
{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}},
{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}},
{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}},
{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}},
{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}},
{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}},
{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}},
{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}},
{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}},
{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}},
{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}},
{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}},
{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}},
{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}},
{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}},
{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}},
{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}},
{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}},
{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}},
{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}},
{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}},
{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}},
{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}},
{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}},
{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}},
{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}},
{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}},
{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}},
{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}},
{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}},
{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}},
{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}},
{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}},
{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}},
{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}},
{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}},
{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}},
{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}},
{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}},
{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}},
{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}},
{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}},
{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}},
{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}},
{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}},
{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}},
{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}},
{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}},
{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}},
{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}}
};
local const ct_data static_dtree[D_CODES] = {
{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
};
const uch _dist_code[DIST_CODE_LEN] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17,
18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
};
const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
};
local const int base_length[LENGTH_CODES] = {
0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
64, 80, 96, 112, 128, 160, 192, 224, 0
};
local const int base_dist[D_CODES] = {
0, 1, 2, 3, 4, 6, 8, 12, 16, 24,
32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
};

60
modules/zlib/src/zlib.def Normal file
Просмотреть файл

@ -0,0 +1,60 @@
LIBRARY "zlib"
DESCRIPTION '"""zlib data compression library"""'
EXETYPE NT
SUBSYSTEM WINDOWS
STUB 'WINSTUB.EXE'
VERSION 1.13
CODE EXECUTE READ
DATA READ WRITE
HEAPSIZE 1048576,4096
EXPORTS
adler32 @1
compress @2
crc32 @3
deflate @4
deflateCopy @5
deflateEnd @6
deflateInit2_ @7
deflateInit_ @8
deflateParams @9
deflateReset @10
deflateSetDictionary @11
gzclose @12
gzdopen @13
gzerror @14
gzflush @15
gzopen @16
gzread @17
gzwrite @18
inflate @19
inflateEnd @20
inflateInit2_ @21
inflateInit_ @22
inflateReset @23
inflateSetDictionary @24
inflateSync @25
uncompress @26
zlibVersion @27
gzprintf @28
gzputc @29
gzgetc @30
gzseek @31
gzrewind @32
gztell @33
gzeof @34
gzsetparams @35
zError @36
inflateSyncPoint @37
get_crc_table @38
compress2 @39
gzputs @40
gzgets @41