Bug 485071 - implement mozStorageStatementParams::NewEnumerate

This allows for the enumeration of named parameters on the parameter JS helper
object.
r=asuth
r=bent
This commit is contained in:
Shawn Wilsher 2009-03-26 16:33:35 -04:00
Родитель 09d3837a75
Коммит ebd57691df
2 изменённых файлов: 153 добавлений и 11 удалений

Просмотреть файл

@ -80,6 +80,7 @@ mozStorageStatementParams::GetScriptableFlags(PRUint32 *aScriptableFlags)
{
*aScriptableFlags =
nsIXPCScriptable::WANT_SETPROPERTY |
nsIXPCScriptable::WANT_NEWENUMERATE |
nsIXPCScriptable::WANT_NEWRESOLVE |
nsIXPCScriptable::ALLOW_PROP_MODS_DURING_RESOLVE;
return NS_OK;
@ -180,7 +181,62 @@ NS_IMETHODIMP
mozStorageStatementParams::NewEnumerate(nsIXPConnectWrappedNative *wrapper, JSContext * cx,
JSObject * obj, PRUint32 enum_op, jsval * statep, jsid *idp, PRBool *_retval)
{
return NS_ERROR_NOT_IMPLEMENTED;
NS_ENSURE_TRUE(mStatement, NS_ERROR_NOT_INITIALIZED);
switch (enum_op) {
case JSENUMERATE_INIT:
{
// Start our internal index at zero.
*statep = JSVAL_ZERO;
// And set our length, if needed.
if (idp)
*idp = INT_TO_JSVAL(mParamCount);
break;
}
case JSENUMERATE_NEXT:
{
NS_ASSERTION(*statep != JSVAL_NULL, "Internal state is null!");
// Make sure we are in range first.
PRUint32 index = static_cast<PRUint32>(JSVAL_TO_INT(*statep));
if (index >= mParamCount) {
*statep = JSVAL_NULL;
return NS_OK;
}
// Get the name of our parameter.
nsCAutoString name;
nsresult rv = mStatement->GetParameterName(index, name);
NS_ENSURE_SUCCESS(rv, rv);
// But drop the first character, which is going to be a ':'.
JSString *jsname = JS_NewStringCopyN(cx, &(name.get()[1]),
name.Length() - 1);
NS_ENSURE_TRUE(jsname, NS_ERROR_OUT_OF_MEMORY);
// Set our name.
if (!JS_ValueToId(cx, STRING_TO_JSVAL(jsname), idp)) {
*_retval = PR_FALSE;
return NS_OK;
}
// And increment our index.
*statep = INT_TO_JSVAL(++index);
break;
}
case JSENUMERATE_DESTROY:
{
// Clear our state.
*statep = JSVAL_NULL;
break;
}
}
return NS_OK;
}
/* PRBool newResolve (in nsIXPConnectWrappedNative wrapper, in JSContextPtr cx, in JSObjectPtr obj, in JSVal id, in PRUint32 flags, out JSObjectPtr objp); */
@ -189,11 +245,18 @@ mozStorageStatementParams::NewResolve(nsIXPConnectWrappedNative *wrapper, JSCont
JSObject * obj, jsval id, PRUint32 flags, JSObject * *objp, PRBool *_retval)
{
NS_ENSURE_TRUE(mStatement, NS_ERROR_NOT_INITIALIZED);
// We do not throw at any point after this unless our index is out of range
// because we want to allow the prototype chain to be checked for the
// property.
PRUint32 idx;
if (JSVAL_IS_INT(id)) {
idx = JSVAL_TO_INT(id);
// Ensure that our index is within range.
if (idx >= mParamCount)
return NS_ERROR_INVALID_ARG;
}
else if (JSVAL_IS_STRING(id)) {
JSString *str = JSVAL_TO_STRING(id);
@ -203,23 +266,21 @@ mozStorageStatementParams::NewResolve(nsIXPConnectWrappedNative *wrapper, JSCont
nsCAutoString name(":");
name.Append(NS_ConvertUTF16toUTF8(nameChars, nameLength));
// check to see if there's a parameter with this name
// Check to see if there's a parameter with this name, and if not, let
// the rest of the prototype chain be checked.
nsresult rv = mStatement->GetParameterIndex(name, &idx);
NS_ENSURE_SUCCESS(rv, rv);
if (NS_FAILED(rv))
return NS_OK;
PRBool success = JS_DefineUCProperty(cx, obj, nameChars, nameLength,
JSVAL_VOID, nsnull, nsnull, 0);
NS_ENSURE_TRUE(success, NS_ERROR_FAILURE);
*_retval = JS_DefineUCProperty(cx, obj, nameChars, nameLength,
JSVAL_VOID, nsnull, nsnull, 0);
NS_ENSURE_TRUE(*_retval, NS_OK);
}
else {
// We do not handle other types.
return NS_ERROR_UNEXPECTED;
return NS_OK;
}
// Ensure that our index is within range.
if (idx >= mParamCount)
return NS_ERROR_INVALID_ARG;
*_retval = ::JS_DefineElement(cx, obj, idx, JSVAL_VOID, nsnull, nsnull, 0);
if (*_retval)
*objp = obj;

Просмотреть файл

@ -0,0 +1,81 @@
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
* vim: sw=2 ts=2 sts=2 et
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Storage Test Code.
*
* The Initial Developer of the Original Code is
* Mozilla Corporation.
* Portions created by the Initial Developer are Copyright (C) 2009
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Shawn Wilsher <me@shawnwilsher.com> (Original Author)
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/**
* This file tests that the JS language helpers have the ability to enumerate
* their properties.
*/
////////////////////////////////////////////////////////////////////////////////
//// Test Functions
function test_params_enumerate()
{
let stmt = getOpenedDatabase().createStatement(
"SELECT * FROM test WHERE id IN (:a, :b, :c)"
);
// Make sure they are right.
let expected = ["a", "b", "c"];
let index = 0;
for (let name in stmt.params)
do_check_eq(name, expected[index++]);
}
////////////////////////////////////////////////////////////////////////////////
//// Test Runner
let tests = [
test_params_enumerate,
];
function run_test()
{
cleanup();
// Create our database.
getOpenedDatabase().executeSimpleSQL(
"CREATE TABLE test (" +
"id INTEGER PRIMARY KEY " +
")"
);
// Run the tests.
tests.forEach(function(test) test());
}