Remove unneeded buildrequires perl, gawk, sed
Remove leading / from path macros
Remove provides for package name - done automatically
Move pkgconfig file stuff under install
Added LICENSE and README under docs
This commit is contained in:
richm%stanfordalumni.org 2006-07-13 18:10:21 +00:00
Родитель 407bc038ef
Коммит f7791eab15
2 изменённых файлов: 0 добавлений и 317 удалений

Просмотреть файл

@ -1,191 +0,0 @@
#!/bin/sh
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape svrcore library.
#
# The Initial Developer of the Original Code is
# Red Hat
# Portions created by the Initial Developer are Copyright (C) 2006
# the Initial Developer. All Rights Reserved.
#
# Contributor(s): Rich Megginson <richm@stanfordalumni.org>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
# This script can be used to build the svrcore-devel rpm and srpm. It assumes
# you begin with nothing but this script. You must have nspr, nspr-devel,
# nss, and nss-devel installed on your system in order to run this script. Not
# only will the script check, but the rpmbuild will also check and bomb out if
# those dependencies are not present. The script allows you to build the rpm
# as a non root user and puts the build files under the current directory. This
# script does not install the rpm.
#
# You may need to edit this script to change:
# the versions of nspr and nss used
# the CVS tag for pulling svrcore
# the svrcore version and release - these should match the spec file
# Always switch into the base directory of this
# shell script prior to executing it so that all
# of its output is written to this directory
cd `dirname $0`
# This script may ONLY be run on Linux!
OS=`uname`
if [ ${OS} != "Linux" ]; then
echo "The '$0' script is ONLY executable on a 'Linux' machine!"
exit 255
fi
# This script may ONLY be executed on either
# an 'i386' platform or an 'x86_64' platform!
PLATFORM=`uname -i`
if [ ${PLATFORM} = "i386" ]; then
BITSIZE=32-bit
elif [ ${PLATFORM} = "x86_64" ]; then
BITSIZE=64-bit
else
echo "The '$0' script is ONLY executable on either"
echo "an 'i386' platform or an 'x86_64' platform!"
exit 255
fi
# initialize environment variables for this script
unset LD_LIBRARY_PATH
CVSROOT=:pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot
export CVSROOT
# define the remaining variables
PACKAGE=svrcore-devel
VERSION=4.0.2
RELEASE=2
SVRCORE_TAG=SVRCORE_4_0_2_RTM
SVRCORE_CORECONF_TAG=$SVRCORE_TAG
PRJ=${PACKAGE}-${VERSION}
RPM_HOME=`pwd`
SPEC_FILENAME=${PACKAGE}.spec
# define subroutines for this script
usage() {
echo
echo "Usage: $0"
echo
}
mkdirs() {
for d in "$@" ; do
if [ -d $d ]; then
mv $d $d.deleted
rm -rf $d.deleted &
fi
mkdir -p $d
done
}
# check the number of arguments supplied to this script
if [ $# -ne 0 ] ; then
usage
exit 255
fi
# remove any old RPM directories
echo "Removing any old RPM directories . . ."
if [ -d ${RPM_HOME}/BUILD ]; then
rm -rf ${RPM_HOME}/BUILD
fi
if [ -d ${RPM_HOME}/SOURCES ]; then
rm -rf ${RPM_HOME}/SOURCES
fi
if [ -d ${RPM_HOME}/SPECS ]; then
rm -rf ${RPM_HOME}/SPECS
fi
echo "Finished."
echo "Changing current working directory to ${RPM_HOME}."
cd ${RPM_HOME}
# create new RPM directories
echo "Creating new RPM directories . . ."
mkdirs BUILD
if [ ! -d ${RPM_HOME}/RPMS ]; then
mkdirs ${RPM_HOME}/RPMS
fi
mkdirs SOURCES SPECS
if [ ! -d ${RPM_HOME}/SRPMS ]; then
mkdirs ${RPM_HOME}/SRPMS
fi
echo "Finished."
# check out SVRCORE CORECONF code
echo "Checking out SVRCORE CORECONF source code . . ."
cvs -z3 -Q export -r ${SVRCORE_CORECONF_TAG} -d ${PRJ} -N mozilla/security/coreconf
echo "Finished."
# check out SVRCORE code
echo "Checking out SVRCORE source code . . ."
cvs -z3 -Q export -r ${SVRCORE_TAG} -d ${PRJ} -N mozilla/security/svrcore
echo "Finished."
# create a tarball from the checked out code
echo "Creating tarball of SVRCORE source code . . ."
tar cf - ${PRJ} | gzip > SOURCES/${PRJ}.tar.gz
echo "Finished."
# remove the checked out code
echo "Removing checked out SVRCORE source code . . ."
rm -rf ${PRJ}
echo "Finished."
# copy spec file
cp ${SPEC_FILENAME} SPECS/${SPEC_FILENAME}
# build the ${BITSIZE} RPM and Source RPM
echo "Executing ${BITSIZE} rpmbuild of ${SPEC_FILENAME} file . . . "
if [ ! -f SRPMS/${PACKAGE}-${VERSION}-${RELEASE}.src.rpm ]; then
rpmbuild --define="_topdir ${RPM_HOME}" --target ${PLATFORM} -ba --clean --rmspec SPECS/${SPEC_FILENAME}
else
rpmbuild --define="_topdir ${RPM_HOME}" --target ${PLATFORM} -bb --clean --rmspec SPECS/${SPEC_FILENAME}
fi
echo "Finished doing ${BITSIZE} rpmbuild of ${SPEC_FILENAME} file."
echo "Removing BUILD directory . . ."
if [ -d ${RPM_HOME}/BUILD ]; then
rm -rf ${RPM_HOME}/BUILD
fi
echo "Finished."
#echo "Removing SOURCES directory . . ."
#if [ -d ${RPM_HOME}/SOURCES ]; then
# rm -rf ${RPM_HOME}/SOURCES
#fi
#echo "Finished."
echo "Removing SPECS directory . . ."
if [ -d ${RPM_HOME}/SPECS ]; then
rm -rf ${RPM_HOME}/SPECS
fi
echo "Finished."

Просмотреть файл

@ -1,126 +0,0 @@
%define nspr_version 4.6
%define nss_version 3.11
Summary: Svrcore - development files for secure PIN handling using NSS crypto
Name: svrcore-devel
Version: 4.0.2
Release: 2%{?dist}
License: MPL/GPL/LGPL
URL: http://www.mozilla.org/projects/security/pki/
Group: Development/Libraries
Requires: nspr-devel >= %{nspr_version}
Requires: nss-devel >= %{nss_version}
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
BuildRequires: nspr-devel >= %{nspr_version}
BuildRequires: nss-devel >= %{nss_version}
BuildRequires: gawk
BuildRequires: perl
BuildRequires: sed
BuildRequires: pkgconfig
Provides: svrcore-devel
Source0: ftp://ftp.mozilla.org/pub/mozilla.org/directory/svrcore/releases/4.0.2/%{name}-%{version}.tar.gz
%description
svrcore provides applications with several ways to handle secure PIN storage
e.g. in an application that must be restarted, but needs the PIN to unlock
the private key and other crypto material, without user intervention. svrcore
uses the facilities provided by NSS.
%prep
%setup -q
%build
# Enable compiler optimizations and disable debugging code
BUILD_OPT=1
export BUILD_OPT
# Generate symbolic info for debuggers
XCFLAGS=$RPM_OPT_FLAGS
export XCFLAGS
PKG_CONFIG_ALLOW_SYSTEM_LIBS=1
PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1
export PKG_CONFIG_ALLOW_SYSTEM_LIBS
export PKG_CONFIG_ALLOW_SYSTEM_CFLAGS
NSPR_INCLUDE_DIR=`/usr/bin/pkg-config --variable=includedir nspr`
export NSPR_INCLUDE_DIR
NSS_INCLUDE_DIR=`/usr/bin/pkg-config --variable=includedir nss`
export NSS_INCLUDE_DIR
%ifarch x86_64 ppc64 ia64 s390x
USE_64=1
export USE_64
%endif
cd mozilla/security/svrcore
# This make assumes the build is still using the mozilla/security/coreconf stuff,
# which does all kinds of crazy stuff with copying files around, looking for
# dependencies, etc.
make EXPORTS="" RELEASE="" REQUIRES="" MODULE="" IMPORTS="" OBJDIR=. INSTALL=true
# Set up our package file
%{__mkdir_p} $RPM_BUILD_ROOT/%{_libdir}/pkgconfig
%{__cat} svrcore.pc.in | sed -e "s,%%libdir%%,%{_libdir},g" \
-e "s,%%prefix%%,%{_prefix},g" \
-e "s,%%exec_prefix%%,%{_prefix},g" \
-e "s,%%includedir%%,%{_includedir},g" \
-e "s,%%NSPR_VERSION%%,%{nspr_version},g" \
-e "s,%%NSS_VERSION%%,%{nss_version},g" \
-e "s,%%SVRCORE_VERSION%%,%{version},g" > \
$RPM_BUILD_ROOT/%{_libdir}/pkgconfig/%{name}.pc
%install
# There is no make install target so we'll do it ourselves.
%{__mkdir_p} $RPM_BUILD_ROOT/%{_includedir}
%{__mkdir_p} $RPM_BUILD_ROOT/%{_libdir}
cd mozilla/security/svrcore
# Copy the binary libraries we want
for file in libsvrcore.a
do
%{__install} -m 644 $file $RPM_BUILD_ROOT/%{_libdir}
done
# Copy the include files
for file in svrcore.h
do
%{__install} -m 644 $file $RPM_BUILD_ROOT/%{_includedir}
done
%clean
%{__rm} -rf $RPM_BUILD_ROOT
%files
%defattr(0644,root,root)
%{_libdir}/pkgconfig/%{name}.pc
%{_libdir}/libsvrcore.a
%{_includedir}/svrcore.h
%changelog
* Mon Jun 26 2006 Rich Megginson <rmeggins@redhat.com> - 4.0.2-2
- Bump spec rev to 2 due to change of spec file name from svrcore
- to svrcore-devel to comply with fedora packaging guidelines
* Thu Jun 22 2006 Rich Megginson <rmeggins@redhat.com> - 4.0.2-1
- Bump rev to 4.0.2; now using HEAD of mozilla/security/coreconf
- which includes the coreconf-location.patch, so got rid of patch
* Tue Apr 18 2006 Rich Megginson <rmeggins@redhat.com> - 4.0.1-3
- Use pkg-config --variable=includedir to get include dirs
* Wed Feb 1 2006 Rich <rmeggins@redhat.com> - 4.0.1-2
- Requires nss version was wrong
* Wed Jan 11 2006 Rich Megginson <rmeggins@redhat.com> - 4.01-1
- Removed svrcore-config - use pkg-config instead
* Mon Dec 19 2005 Rich Megginson <rmeggins@redhat.com> - 4.01-1
- Initial revision