Граф коммитов

18 Коммитов

Автор SHA1 Сообщение Дата
bienvenu%nventure.com a348600c38 fix build warnings introduced by 64 bit seekable streams, r=darin, sr=mscott, 242591, 242583 2004-05-04 23:32:32 +00:00
gerv%gerv.net 6f486a3c92 Bug 236613: change to MPL/LGPL/GPL tri-license. 2004-04-18 14:21:17 +00:00
bienvenu%nventure.com 6fd0bba771 make nsISeekableStream interface support 64 bit streams, part of 180154 also fix 207400 allow mail folders > 2GB r=darin, sr=mscott 2004-04-13 14:37:53 +00:00
brendan%mozilla.org 36867f5dc9 Reduce seeks outside the FastLoad file's underlying stream buffer (195010,
r=ben, sr=bryner).

- Pass null scope objects into nsIScriptContext::Compile{EventHandler,Script}
when precompiling for brutal sharing.  The JS engine does not need a non-null
object parameter for static scope.  That parameter can be non-null only if it
helps the compiler "pre-bind" functions to the same scope object that they'll
be parented by when executing, but with brutal sharing, functions are
precompiled once and executed against many different scope objects.

- A problem in XUL FastLoad was that it would serialize master .xul document
out-of-line scripts (those included via script src= from non-overlay, "master"
.xul docs) far from the place in the FastLoad file where XUL prototype script
info was serialized for the <script src=> tag itself.  I fixed that so that,
unless the out-of-line script was previously serialized (by a different src=
reference from another .xul file), the OOL script data immediately follows the
proto-script info in the FastLoad file.

This required adding a SerializeOutOfLine method to nsXULPrototypeScript, which
restores symmetry by matching the existing DeserializeOutOfLine(Script) (note:
I dropped the redundant "Script" from the end of the latter method's name.  We
need SerializeOutOfLine to handle overlay OOL scripts.	They are serialized by
nsXULDocument::OnStreamComplete, because that code knows the difference between
an overlay and a master doc.  This removes all trace of FastLoad writing from
nsXULPrototypeScript::Compile -- FastLoad stuff didn't belong there, not only
because we now want to write master OOL scripts later, when walking the master
XUL prototype doc's element tree, but also for modularity reasons.  The caller
knows about FastLoad, nsXULPrototypeScript::Compile does just what its name
implies.

There are 132 seeks with the patch, only 49 of which dump the underlying file
stream's buffer, vs. 133 seeks without the patch, 87 of which dump the buffer.

- Nit-picked some comments to fit in 80 columns, and made other cosmetic fixes.

- Implicated the nsXULDocument::mIsWritingFastLoad flag from the useXULCache
"is the XUL cache enabled?" flag, so other places that test mIsWritingFastLoad
don't have to query whether the cache is enabled.

- Added METERING synchronous meter-dumping to /tmp/bufstats, only ifdef
DEBUG_brendan, in netwerk/base/src/nsBufferedStreams.cpp.

- Added the deferred seek optimization from the first patch in bug 195010 to
nsFastLoadFile.cpp.

- Fixed nsFastLoadFileReader so it overrides readSegments as well as read.
This catches up with the interface extension made to nsIInputStream to add
readSegments.  The nsFastLoadFileReader extends nsBinaryInputStream, which is
a concrete class, and overrides Read in order to snoop on *all* bytes read.
It does this in order to demultiplex documents interleaved when the FastLoad
file was written.

But since the readSegments move into nsIInputStream.idl, certain primitives
in nsBinaryStream.cpp, e.g., nsBinaryInputStream::ReadCString, have used
ReadSegments, not Read, to consume parts of the underlying stream (to read
the C string's chars, in that example), and the FastLoad file implementation
has not accounted for those bytes.

- Added a new method to nsIFastLoadFileControl and its impls: hasMuxedDocument.
 This is needed when serializing master XUL doc OOL scripts, because we must
not serialize twice, and any OOL script that other XUL docs can include via
script src= could already be in the FastLoad mux.

/be
2003-04-12 01:34:11 +00:00
dbaron%dbaron.org f2cd5e3e66 Bug 178643: Remove uses of NS_INIT_ISUPPORTS, since it is no longer needed. r=timeless sr=jag 2003-01-08 23:19:20 +00:00
dougt%netscape.com c5e8f896cd 166917. Clean up xpcom SDK includes. r=rpotts@netscape.com, sr=alecf@netscape.com, a=rjesup@wgate.com 2002-09-07 17:13:19 +00:00
darin%netscape.com f43dfb75ba fixes bug 142870 "nsIFile should use UCS-2 instead of UTF-8"
r=dougt sr=alecf
2002-05-07 23:07:19 +00:00
ben%netscape.com 4ad1dffce2 Forgot to check in this file, which was r=dbaron, sr=waterson as part of previous checkin 2002-05-03 03:37:31 +00:00
darin%netscape.com 1b1677bbe9 fixes bug 129279 "nsIFile unicode/utf8/ascii task"
r=dougt sr=alecf
2002-04-27 05:33:09 +00:00
brendan%mozilla.org 1f2b9eb5f4 Store FastLoad dependency mtimes, and invalidate if any changes (106021, r=dveditz, sr=shaver). 2001-10-31 08:29:25 +00:00
jaggernaut%netscape.com d77d1a3808 Bug 53057: [API] turn off implicit |CharT*| conversion operators for nsCString, rr=dbaron, rs=scc 2001-10-24 09:06:49 +00:00
brendan%mozilla.org a96c9a9870 Add SetAlphaBounds, TABLE_SIZE, and MIN_ALPHA APIs (103990, r=dbaron, sr=waterson). 2001-10-16 05:40:27 +00:00
gerv%gerv.net f385eb981a Relicensing Round 1, Take 2. Most C-like NPL files -> NPL/GPL/LGPL. Bug 98089. 2001-09-28 20:14:13 +00:00
brendan%mozilla.org b365808864 Bit checkin for bug 68045, r/sr=waterson&shaver, second attempt. It all works
for me on optimized and debug gcc2.96, rh7.1.

- Better failure codes from nsXULPrototypeScript::Deserialize.

- Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize
  failure, instead of just nulling the FastLoad service's output stream.

- Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from
  nsChromeProtocolHandler.cpp.  AbortFastLoads flushes the XUL cache now, for
  good measure.

- The needless "Current" adjective in nsIFastLoadService attribute and method
  names is no more.

- Add a do_GetFastLoadService() helper, to use CID instead of contractid, and
  to let the compiler consolidate the static inline CID.

- Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without
  the checksum verification step when reading a FastLoad file.

- Verify the FastLoad file checksum, by default.  Also, cache it in the FastLoad
  service so we don't recompute it when re-opening the FastLoad file as mailnews
  and other top-levels start up.  Fill the checksum cache in EndFastLoad, when
  the last pseudo-concurrent top-level finishes loading.

  My hope to compute the checksum while writing the FastLoad file ran afoul of
  misordered writes.  The old code to checksum the in-memory nsFastLoadHeader
  also was broken on little endian platforms.  Now all checksumming is done via
  a separate read pass over the complete file, save for the header's checksum
  field, which is summed as if it contained zero.

- Track and check FastLoad file dependencies.  This required groveling with a
  bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it
  and weep.  Dependency checking, as well as checksum access and computation,
  use better-factored nsIFastLoad{File,Read,Write}Control interfaces.

- nsBufferedStream::Seek wasn't flushing the buffer when seeking backward
  within the buffer, but it must, because mCursor bounds the amount to write
  if the buffer contains the end of file.

- Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we
  don't have to screw around with the bufferying layer when checksumming. Also
  implement nsIStreamBufferAccess in nsBufferedOutputStream.

- nsISeekableOutputStream was bogus, based on a bad state I had put the
  nsBufferedOutputStream code in on its way from being completely broken when
  you seek backwards outside of the buffer.  Removing this interface required
  using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful
  ordering of Close calls (the Reader must close after the Writer or Updater,
  so that the Reader's underlying, unbuffered input stream can be read by
  nsFastLoadFileWriter::Close to compute the checksum.

- Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style,
  nsnull vs. 0, useless variable elimination, tortured control flow,
  AutoString instead of String, and gratuitous ; after nsISupportsUtils.h
  macro call cleanups.
2001-08-21 20:51:34 +00:00
blizzard%redhat.com 8449d6469f Back out brendan's checkin to try and get linux starting up again. 2001-08-17 19:45:11 +00:00
brendan%mozilla.org 525a387cf2 - Better failure codes from nsXULPrototypeScript::Deserialize.
- Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize
  failure, instead of just nulling the FastLoad service's output stream.

- Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from
  nsChromeProtocolHandler.cpp.  AbortFastLoads flushes the XUL cache now, for
  good measure.

- The needless "Current" adjective in nsIFastLoadService attribute and method
  names is no more.

- Add a do_GetFastLoadService() helper, to use CID instead of contractid, and
  to let the compiler consolidate the static inline CID.

- Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without
  the checksum verification step when reading a FastLoad file.

- Verify the FastLoad file checksum, by default.  Also, cache it in the FastLoad
  service so we don't recompute it when re-opening the FastLoad file as mailnews
  and other top-levels start up.  Fill the checksum cache in EndFastLoad, when
  the last pseudo-concurrent top-level finishes loading.

  My hope to compute the checksum while writing the FastLoad file ran afoul of
  misordered writes.  The old code to checksum the in-memory nsFastLoadHeader
  also was broken on little endian platforms.  Now all checksumming is done via
  a separate read pass over the complete file, save for the header's checksum
  field, which is summed as if it contained zero.

- Track and check FastLoad file dependencies.  This required groveling with a
  bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it
  and weep.  Dependency checking, as well as checksum access and computation,
  use better-factored nsIFastLoad{File,Read,Write}Control interfaces.

- nsBufferedStream::Seek wasn't flushing the buffer when seeking backward
  within the buffer, but it must, because mCursor bounds the amount to write
  if the buffer contains the end of file.

- Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we
  don't have to screw around with the bufferying layer when checksumming. Also
  implement nsIStreamBufferAccess in nsBufferedOutputStream.

- nsISeekableOutputStream was bogus, based on a bad state I had put the
  nsBufferedOutputStream code in on its way from being completely broken when
  you seek backwards outside of the buffer.  Removing this interface required
  using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful
  ordering of Close calls (the Writer or Updater must close after the Reader,
  so that the Reader's underlying, unbuffered input stream can be read by
  nsFastLoadFileWriter::Close to compute the checksum.

- Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style,
  nsnull vs. 0, useless variable elimination, tortured control flow,
  AutoString instead of String, and gratuitous ; after nsISupportsUtils.h
  macro call cleanups.
2001-08-17 09:52:55 +00:00
dbaron%fas.harvard.edu 0e25f44bee Fix OS/2 and BeOS bustage from fastload landing. 2001-07-31 20:34:37 +00:00
brendan%mozilla.org 8c7c819206 FASTLOAD_20010703_BRANCH landing, r=dbaron, sr=shaver. 2001-07-31 19:05:34 +00:00