* We must use the full path to the source file when calling MSVC so that debugging information shows up in the object files.
* Because of cygwin's use of /cygdrive when using full paths, we must use a cygwin-wrapper script in some cases to allow native win32 programs to use a fully qualified cygwin path.
* We have to call configure using the full path so that $(srcdir) contains the
full path in the Makefiles. The rules have been changed for win32 so that it
always use $(srcdir)/$*.{c,cpp} as the sourcefile name even when the file is in
the cwd. This works around both the /cygdrive issue and the msvc's path info
optimization.
* We still use the wrapper when calling rc.exe & nsinstall. nsinstall
frequently takes multiple args and is called all over the tree so changing each
calling site is going to be expensive. (I'll have to check the logs again but
I think the rc wrapping can go.)
* nspr & ldap still use the wrappers for all native win32 progs. Neither nspr
nor ldap uses the acoutput-fast.pl script to speed up the substitution of
@srcdir@ into their Makefiles so, makefile substitution will break if we use
dos-paths.
* In the handful of directories where we copy srcfiles from another directory
in lieu of using VPATHs, we have to now copy those files to $(srcdir) so that
the default rules can find them.
Bug #141834 r=leaf,wtc,dmose,mcs
* Adds Makefile.ins to win32 specific dirs
* Adds WINNT ifdefs to Makefile.ins
* Causes NSPR to be compiled with --with-mozilla
* Misc general Makefile.in cleanup
Bug #58981 r=mcafee
for me on optimized and debug gcc2.96, rh7.1.
- Better failure codes from nsXULPrototypeScript::Deserialize.
- Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize
failure, instead of just nulling the FastLoad service's output stream.
- Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from
nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for
good measure.
- The needless "Current" adjective in nsIFastLoadService attribute and method
names is no more.
- Add a do_GetFastLoadService() helper, to use CID instead of contractid, and
to let the compiler consolidate the static inline CID.
- Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without
the checksum verification step when reading a FastLoad file.
- Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad
service so we don't recompute it when re-opening the FastLoad file as mailnews
and other top-levels start up. Fill the checksum cache in EndFastLoad, when
the last pseudo-concurrent top-level finishes loading.
My hope to compute the checksum while writing the FastLoad file ran afoul of
misordered writes. The old code to checksum the in-memory nsFastLoadHeader
also was broken on little endian platforms. Now all checksumming is done via
a separate read pass over the complete file, save for the header's checksum
field, which is summed as if it contained zero.
- Track and check FastLoad file dependencies. This required groveling with a
bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it
and weep. Dependency checking, as well as checksum access and computation,
use better-factored nsIFastLoad{File,Read,Write}Control interfaces.
- nsBufferedStream::Seek wasn't flushing the buffer when seeking backward
within the buffer, but it must, because mCursor bounds the amount to write
if the buffer contains the end of file.
- Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we
don't have to screw around with the bufferying layer when checksumming. Also
implement nsIStreamBufferAccess in nsBufferedOutputStream.
- nsISeekableOutputStream was bogus, based on a bad state I had put the
nsBufferedOutputStream code in on its way from being completely broken when
you seek backwards outside of the buffer. Removing this interface required
using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful
ordering of Close calls (the Reader must close after the Writer or Updater,
so that the Reader's underlying, unbuffered input stream can be read by
nsFastLoadFileWriter::Close to compute the checksum.
- Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style,
nsnull vs. 0, useless variable elimination, tortured control flow,
AutoString instead of String, and gratuitous ; after nsISupportsUtils.h
macro call cleanups.
- Call nsXULDocument::AbortFastLoads after nsXULPrototypeScript::Serialize
failure, instead of just nulling the FastLoad service's output stream.
- Expose nsXULDocument::AbortFastLoads via nsIXULPrototypeCache, for use from
nsChromeProtocolHandler.cpp. AbortFastLoads flushes the XUL cache now, for
good measure.
- The needless "Current" adjective in nsIFastLoadService attribute and method
names is no more.
- Add a do_GetFastLoadService() helper, to use CID instead of contractid, and
to let the compiler consolidate the static inline CID.
- Add "nglayout.debug.checksum_xul_fastload_file" pref so people can do without
the checksum verification step when reading a FastLoad file.
- Verify the FastLoad file checksum, by default. Also, cache it in the FastLoad
service so we don't recompute it when re-opening the FastLoad file as mailnews
and other top-levels start up. Fill the checksum cache in EndFastLoad, when
the last pseudo-concurrent top-level finishes loading.
My hope to compute the checksum while writing the FastLoad file ran afoul of
misordered writes. The old code to checksum the in-memory nsFastLoadHeader
also was broken on little endian platforms. Now all checksumming is done via
a separate read pass over the complete file, save for the header's checksum
field, which is summed as if it contained zero.
- Track and check FastLoad file dependencies. This required groveling with a
bunch of Necko interfaces in nsChromeProtocolHandler::NewChannel -- read it
and weep. Dependency checking, as well as checksum access and computation,
use better-factored nsIFastLoad{File,Read,Write}Control interfaces.
- nsBufferedStream::Seek wasn't flushing the buffer when seeking backward
within the buffer, but it must, because mCursor bounds the amount to write
if the buffer contains the end of file.
- Add an unbufferedStream readonly attribute to nsIStreamBufferAccess, so we
don't have to screw around with the bufferying layer when checksumming. Also
implement nsIStreamBufferAccess in nsBufferedOutputStream.
- nsISeekableOutputStream was bogus, based on a bad state I had put the
nsBufferedOutputStream code in on its way from being completely broken when
you seek backwards outside of the buffer. Removing this interface required
using nsIFastLoadFileIO in nsFastLoadFileWriter, and it also required careful
ordering of Close calls (the Writer or Updater must close after the Reader,
so that the Reader's underlying, unbuffered input stream can be read by
nsFastLoadFileWriter::Close to compute the checksum.
- Miscellaneous tab/indentation, comment typo, bracing, if( => if ( style,
nsnull vs. 0, useless variable elimination, tortured control flow,
AutoString instead of String, and gratuitous ; after nsISupportsUtils.h
macro call cleanups.
dynamic, updated static packager list, added build_static.pl, fixed static
component loader to handle no static component cases, updated and added
.cvsignore for extra files generated by static build
Changes allow us to have a finer control over which parts of the tree are built with PIC. Part of the static build branch landing.
Bug #46775 r=mcafee a=leaf
Revising nsIChannel to allow for overlapped i/o. This consists of three parts:
1. Factoring nsIChannel into a protocol specific part, the nsIChannel, and a socket specific, the nsITransport.
2. Derive the nsIChannel from a nsIRequest.
2. Changes the notification system from necko and the URILoader to pass the nsIRequest interface instead of nsIChannel interface.
This goal stems from wanting to be able to have active AsyncRead and AsyncWrite operations on nsSocketTransport.
This is desired because it would greatly simplify the task of maintaining persistent/reusable socket connections
for FTP, HTTP, and Imap (and potentially other protocols). The problem with the existing nsIChannel interface is
that it does not allow one to selectively suspend just one of the read or write operations while keeping the other active.
r=darin@netscape.comsr=rpotts@netscape.com
1. Factoring nsIChannel into a protocol specific part, the nsIChannel, and a socket specific, the nsITransport.
2. Derive the nsIChannel from a nsIRequest.
2. Changes the notification system from necko and the URILoader to pass the nsIRequest interface instead of nsIChannel interface.
This goal stems from wanting to be able to have active AsyncRead and AsyncWrite operations on nsSocketTransport.
This is desired because it would greatly simplify the task of maintaining persistent/reusable socket connections
for FTP, HTTP, and Imap (and potentially other protocols). The problem with the existing nsIChannel interface is
that it does not allow one to selectively suspend just one of the read or write operations while keeping the other active.
The full details of the change on written up in the netlib newsgroup.
r=darin@netscape.comsr=rpotts@netscape.com
bryner%netscape.com
mkaply%us.ibm.com
darin%netscape.com
seawood%netscape.com
leaf%mozilla.org
mstoltz%netscape.com
bzbarsky%mit.edu
dougt%netscape.com
timeless%mac.com
alecf%netscape.com
dp%netscape.com
cathleen%netscape.com
sfraser%netscape.com
brade%netscape.com
jaggernaut%netscape.com
ccarlen%netscape.com
blythe%netscape.com
jband%netscape.com
pete%alphanumerica.com
gerv%gerv.net
idk%eng.sun.com
scc%mozilla.org
valeski%netscape.com
cls%seawood.org
brendan%mozilla.org
dbaron%fas.harvard.edu
blizzard%redhat.com
andreas.otte%primus-online.de
mcafee%netscape.com
waterson%netscape.com
ddrinan%netscape.com
kandrot%netscape.com
shaver%mozilla.org
hewitt%netscape.com
dprice%netscape.com
rickg%netscape.com
dveditz%netscape.com
disttsc%bart.nl
gagan%netscape.com
ssu%netscape.com
jgmyers%netscape.com
bryner%uiuc.edu
sgehani%netscape.com