/* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 2002 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Darin Fisher * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "nsIPipe.h" #include "nsIEventTarget.h" #include "nsISeekableStream.h" #include "nsSegmentedBuffer.h" #include "nsStreamUtils.h" #include "nsAutoLock.h" #include "nsCOMPtr.h" #include "nsCRT.h" #include "prlog.h" #include "nsInt64.h" #if defined(PR_LOGGING) // // set NSPR_LOG_MODULES=nsPipe:5 // static PRLogModuleInfo *gPipeLog = PR_NewLogModule("nsPipe"); #define LOG(args) PR_LOG(gPipeLog, PR_LOG_DEBUG, args) #else #define LOG(args) #endif #define DEFAULT_SEGMENT_SIZE 4096 #define DEFAULT_SEGMENT_COUNT 16 class nsPipe; class nsPipeEvents; class nsPipeInputStream; class nsPipeOutputStream; //----------------------------------------------------------------------------- // this class is used to delay notifications until the end of a particular // scope. it helps avoid the complexity of issuing callbacks while inside // a critical section. class nsPipeEvents { public: nsPipeEvents() { } ~nsPipeEvents(); inline void NotifyInputReady(nsIAsyncInputStream *stream, nsIInputStreamCallback *callback) { NS_ASSERTION(!mInputCallback, "already have an input event"); mInputStream = stream; mInputCallback = callback; } inline void NotifyOutputReady(nsIAsyncOutputStream *stream, nsIOutputStreamCallback *callback) { NS_ASSERTION(!mOutputCallback, "already have an output event"); mOutputStream = stream; mOutputCallback = callback; } private: nsCOMPtr mInputStream; nsCOMPtr mInputCallback; nsCOMPtr mOutputStream; nsCOMPtr mOutputCallback; }; //----------------------------------------------------------------------------- // the input end of a pipe (allocated as a member of the pipe). class nsPipeInputStream : public nsIAsyncInputStream , public nsISeekableStream , public nsISearchableInputStream { public: // since this class will be allocated as a member of the pipe, we do not // need our own ref count. instead, we share the lifetime (the ref count) // of the entire pipe. this macro is just convenience since it does not // declare a mRefCount variable; however, don't let the name fool you... // we are not inheriting from nsPipe ;-) NS_DECL_ISUPPORTS_INHERITED NS_DECL_NSIINPUTSTREAM NS_DECL_NSIASYNCINPUTSTREAM NS_DECL_NSISEEKABLESTREAM NS_DECL_NSISEARCHABLEINPUTSTREAM nsPipeInputStream(nsPipe *pipe) : mPipe(pipe) , mReaderRefCnt(0) , mLogicalOffset(0) , mBlocking(PR_TRUE) , mBlocked(PR_FALSE) , mAvailable(0) , mCallbackFlags(0) { } nsresult Fill(); void SetNonBlocking(PRBool aNonBlocking) { mBlocking = !aNonBlocking; } PRUint32 Available() { return mAvailable; } void ReduceAvailable(PRUint32 avail) { mAvailable -= avail; } // synchronously wait for the pipe to become readable. nsresult Wait(); // these functions return true to indicate that the pipe's monitor should // be notified, to wake up a blocked reader if any. PRBool OnInputReadable(PRUint32 bytesWritten, nsPipeEvents &); PRBool OnInputException(nsresult, nsPipeEvents &); private: nsPipe *mPipe; // separate refcnt so that we know when to close the consumer nsrefcnt mReaderRefCnt; nsInt64 mLogicalOffset; PRPackedBool mBlocking; // these variables can only be accessed while inside the pipe's monitor PRPackedBool mBlocked; PRUint32 mAvailable; nsCOMPtr mCallback; PRUint32 mCallbackFlags; }; //----------------------------------------------------------------------------- // the output end of a pipe (allocated as a member of the pipe). class nsPipeOutputStream : public nsIAsyncOutputStream , public nsISeekableStream { public: // since this class will be allocated as a member of the pipe, we do not // need our own ref count. instead, we share the lifetime (the ref count) // of the entire pipe. this macro is just convenience since it does not // declare a mRefCount variable; however, don't let the name fool you... // we are not inheriting from nsPipe ;-) NS_DECL_ISUPPORTS_INHERITED NS_DECL_NSIOUTPUTSTREAM NS_DECL_NSIASYNCOUTPUTSTREAM NS_DECL_NSISEEKABLESTREAM nsPipeOutputStream(nsPipe *pipe) : mPipe(pipe) , mWriterRefCnt(0) , mLogicalOffset(0) , mBlocking(PR_TRUE) , mBlocked(PR_FALSE) , mWritable(PR_TRUE) , mCallbackFlags(0) { } void SetNonBlocking(PRBool aNonBlocking) { mBlocking = !aNonBlocking; } void SetWritable(PRBool writable) { mWritable = writable; } // synchronously wait for the pipe to become writable. nsresult Wait(); // these functions return true to indicate that the pipe's monitor should // be notified, to wake up a blocked writer if any. PRBool OnOutputWritable(nsPipeEvents &); PRBool OnOutputException(nsresult, nsPipeEvents &); private: nsPipe *mPipe; // separate refcnt so that we know when to close the producer nsrefcnt mWriterRefCnt; nsInt64 mLogicalOffset; PRPackedBool mBlocking; // these variables can only be accessed while inside the pipe's monitor PRPackedBool mBlocked; PRPackedBool mWritable; nsCOMPtr mCallback; PRUint32 mCallbackFlags; }; //----------------------------------------------------------------------------- class nsPipe : public nsIPipe { public: friend class nsPipeInputStream; friend class nsPipeOutputStream; NS_DECL_ISUPPORTS NS_DECL_NSIPIPE // nsPipe methods: nsPipe(); private: ~nsPipe(); public: // // methods below may only be called while inside the pipe's monitor // void PeekSegment(PRUint32 n, char *&cursor, char *&limit); // // methods below may be called while outside the pipe's monitor // nsresult GetReadSegment(const char *&segment, PRUint32 &segmentLen); void AdvanceReadCursor(PRUint32 count); nsresult GetWriteSegment(char *&segment, PRUint32 &segmentLen); void AdvanceWriteCursor(PRUint32 count); void OnPipeException(nsresult reason, PRBool outputOnly = PR_FALSE); protected: // We can't inherit from both nsIInputStream and nsIOutputStream // because they collide on their Close method. Consequently we nest their // implementations to avoid the extra object allocation. nsPipeInputStream mInput; nsPipeOutputStream mOutput; PRMonitor* mMonitor; nsSegmentedBuffer mBuffer; char* mReadCursor; char* mReadLimit; PRInt32 mWriteSegment; char* mWriteCursor; char* mWriteLimit; nsresult mStatus; }; // // NOTES on buffer architecture: // // +-----------------+ - - mBuffer.GetSegment(0) // | | // + - - - - - - - - + - - mReadCursor // |/////////////////| // |/////////////////| // |/////////////////| // |/////////////////| // +-----------------+ - - mReadLimit // | // +-----------------+ // |/////////////////| // |/////////////////| // |/////////////////| // |/////////////////| // |/////////////////| // |/////////////////| // +-----------------+ // | // +-----------------+ - - mBuffer.GetSegment(mWriteSegment) // |/////////////////| // |/////////////////| // |/////////////////| // + - - - - - - - - + - - mWriteCursor // | | // | | // +-----------------+ - - mWriteLimit // // (shaded region contains data) // // NOTE: on some systems (notably OS/2), the heap allocator uses an arena for // small allocations (e.g., 64 byte allocations). this means that buffers may // be allocated back-to-back. in the diagram above, for example, mReadLimit // would actually be pointing at the beginning of the next segment. when // making changes to this file, please keep this fact in mind. // //----------------------------------------------------------------------------- // nsPipe methods: //----------------------------------------------------------------------------- nsPipe::nsPipe() : mInput(this) , mOutput(this) , mMonitor(nsnull) , mReadCursor(nsnull) , mReadLimit(nsnull) , mWriteSegment(-1) , mWriteCursor(nsnull) , mWriteLimit(nsnull) , mStatus(NS_OK) { } nsPipe::~nsPipe() { if (mMonitor) PR_DestroyMonitor(mMonitor); } NS_IMPL_THREADSAFE_ISUPPORTS1(nsPipe, nsIPipe) NS_IMETHODIMP nsPipe::Init(PRBool nonBlockingIn, PRBool nonBlockingOut, PRUint32 segmentSize, PRUint32 segmentCount, nsIMemory *segmentAlloc) { mMonitor = PR_NewMonitor(); if (!mMonitor) return NS_ERROR_OUT_OF_MEMORY; if (segmentSize == 0) segmentSize = DEFAULT_SEGMENT_SIZE; if (segmentCount == 0) segmentCount = DEFAULT_SEGMENT_COUNT; // protect against overflow PRUint32 maxCount = PRUint32(-1) / segmentSize; if (segmentCount > maxCount) segmentCount = maxCount; nsresult rv = mBuffer.Init(segmentSize, segmentSize * segmentCount, segmentAlloc); if (NS_FAILED(rv)) return rv; mInput.SetNonBlocking(nonBlockingIn); mOutput.SetNonBlocking(nonBlockingOut); return NS_OK; } NS_IMETHODIMP nsPipe::GetInputStream(nsIAsyncInputStream **aInputStream) { NS_ADDREF(*aInputStream = &mInput); return NS_OK; } NS_IMETHODIMP nsPipe::GetOutputStream(nsIAsyncOutputStream **aOutputStream) { NS_ADDREF(*aOutputStream = &mOutput); return NS_OK; } void nsPipe::PeekSegment(PRUint32 index, char *&cursor, char *&limit) { if (index == 0) { NS_ASSERTION(!mReadCursor || mBuffer.GetSegmentCount(), "unexpected state"); cursor = mReadCursor; limit = mReadLimit; } else { PRUint32 numSegments = mBuffer.GetSegmentCount(); if (index >= numSegments) cursor = limit = nsnull; else { cursor = mBuffer.GetSegment(index); if (mWriteSegment == (PRInt32) index) limit = mWriteCursor; else limit = cursor + mBuffer.GetSegmentSize(); } } } nsresult nsPipe::GetReadSegment(const char *&segment, PRUint32 &segmentLen) { nsAutoMonitor mon(mMonitor); if (mReadCursor == mReadLimit) return NS_FAILED(mStatus) ? mStatus : NS_BASE_STREAM_WOULD_BLOCK; segment = mReadCursor; segmentLen = mReadLimit - mReadCursor; return NS_OK; } void nsPipe::AdvanceReadCursor(PRUint32 bytesRead) { NS_ASSERTION(bytesRead, "don't call if no bytes read"); nsPipeEvents events; { nsAutoMonitor mon(mMonitor); LOG(("III advancing read cursor by %u\n", bytesRead)); NS_ASSERTION(bytesRead <= mBuffer.GetSegmentSize(), "read too much"); mReadCursor += bytesRead; NS_ASSERTION(mReadCursor <= mReadLimit, "read cursor exceeds limit"); mInput.ReduceAvailable(bytesRead); if (mReadCursor == mReadLimit) { // we've reached the limit of how much we can read from this segment. // if at the end of this segment, then we must discard this segment. // if still writing in this segment then bail because we're not done // with the segment and have to wait for now... if (mWriteSegment == 0 && mWriteLimit > mWriteCursor) { NS_ASSERTION(mReadLimit == mWriteCursor, "unexpected state"); return; } // shift write segment index (-1 indicates an empty buffer). --mWriteSegment; // done with this segment mBuffer.DeleteFirstSegment(); LOG(("III deleting first segment\n")); if (mWriteSegment == -1) { // buffer is completely empty mReadCursor = nsnull; mReadLimit = nsnull; mWriteCursor = nsnull; mWriteLimit = nsnull; } else { // advance read cursor and limit to next buffer segment mReadCursor = mBuffer.GetSegment(0); if (mWriteSegment == 0) mReadLimit = mWriteCursor; else mReadLimit = mReadCursor + mBuffer.GetSegmentSize(); } // we've free'd up a segment, so notify output stream that pipe has // room for a new segment. if (mOutput.OnOutputWritable(events)) mon.Notify(); } } } nsresult nsPipe::GetWriteSegment(char *&segment, PRUint32 &segmentLen) { nsAutoMonitor mon(mMonitor); if (NS_FAILED(mStatus)) return mStatus; // write cursor and limit may both be null indicating an empty buffer. if (mWriteCursor == mWriteLimit) { char *seg = mBuffer.AppendNewSegment(); // pipe is full if (seg == nsnull) return NS_BASE_STREAM_WOULD_BLOCK; LOG(("OOO appended new segment\n")); mWriteCursor = seg; mWriteLimit = mWriteCursor + mBuffer.GetSegmentSize(); ++mWriteSegment; } // make sure read cursor is initialized if (mReadCursor == nsnull) { NS_ASSERTION(mWriteSegment == 0, "unexpected null read cursor"); mReadCursor = mReadLimit = mWriteCursor; } // check to see if we can roll-back our read and write cursors to the // beginning of the current/first segment. this is purely an optimization. if (mReadCursor == mWriteCursor && mWriteSegment == 0) { char *head = mBuffer.GetSegment(0); LOG(("OOO rolling back write cursor %u bytes\n", mWriteCursor - head)); mWriteCursor = mReadCursor = mReadLimit = head; } segment = mWriteCursor; segmentLen = mWriteLimit - mWriteCursor; return NS_OK; } void nsPipe::AdvanceWriteCursor(PRUint32 bytesWritten) { NS_ASSERTION(bytesWritten, "don't call if no bytes written"); nsPipeEvents events; { nsAutoMonitor mon(mMonitor); LOG(("OOO advancing write cursor by %u\n", bytesWritten)); char *newWriteCursor = mWriteCursor + bytesWritten; NS_ASSERTION(newWriteCursor <= mWriteLimit, "write cursor exceeds limit"); // update read limit if reading in the same segment if (mWriteSegment == 0 && mReadLimit == mWriteCursor) mReadLimit = newWriteCursor; mWriteCursor = newWriteCursor; NS_ASSERTION(mReadCursor != mWriteCursor, "read cursor is bad"); // update the writable flag on the output stream if (mWriteCursor == mWriteLimit) { if (mBuffer.GetSize() >= mBuffer.GetMaxSize()) mOutput.SetWritable(PR_FALSE); } // notify input stream that pipe now contains additional data if (mInput.OnInputReadable(bytesWritten, events)) mon.Notify(); } } void nsPipe::OnPipeException(nsresult reason, PRBool outputOnly) { LOG(("PPP nsPipe::OnPipeException [reason=%x output-only=%d]\n", reason, outputOnly)); nsPipeEvents events; { nsAutoMonitor mon(mMonitor); // if we've already hit an exception, then ignore this one. if (NS_FAILED(mStatus)) return; mStatus = reason; // an output-only exception applies to the input end if the pipe has // zero bytes available. if (outputOnly && !mInput.Available()) outputOnly = PR_FALSE; if (!outputOnly) if (mInput.OnInputException(reason, events)) mon.Notify(); if (mOutput.OnOutputException(reason, events)) mon.Notify(); } } //----------------------------------------------------------------------------- // nsPipeEvents methods: //----------------------------------------------------------------------------- nsPipeEvents::~nsPipeEvents() { // dispatch any pending events if (mInputCallback) { mInputCallback->OnInputStreamReady(mInputStream); mInputCallback = 0; mInputStream = 0; } if (mOutputCallback) { mOutputCallback->OnOutputStreamReady(mOutputStream); mOutputCallback = 0; mOutputStream = 0; } } //----------------------------------------------------------------------------- // nsPipeInputStream methods: //----------------------------------------------------------------------------- nsresult nsPipeInputStream::Wait() { NS_ASSERTION(mBlocking, "wait on non-blocking pipe input stream"); nsAutoMonitor mon(mPipe->mMonitor); while (NS_SUCCEEDED(mPipe->mStatus) && (mAvailable == 0)) { LOG(("III pipe input: waiting for data\n")); mBlocked = PR_TRUE; mon.Wait(); mBlocked = PR_FALSE; LOG(("III pipe input: woke up [pipe-status=%x available=%u]\n", mPipe->mStatus, mAvailable)); } return mPipe->mStatus == NS_BASE_STREAM_CLOSED ? NS_OK : mPipe->mStatus; } PRBool nsPipeInputStream::OnInputReadable(PRUint32 bytesWritten, nsPipeEvents &events) { PRBool result = PR_FALSE; mAvailable += bytesWritten; if (mCallback && !(mCallbackFlags & WAIT_CLOSURE_ONLY)) { events.NotifyInputReady(this, mCallback); mCallback = 0; mCallbackFlags = 0; } else if (mBlocked) result = PR_TRUE; return result; } PRBool nsPipeInputStream::OnInputException(nsresult reason, nsPipeEvents &events) { LOG(("nsPipeInputStream::OnInputException [this=%x reason=%x]\n", this, reason)); PRBool result = PR_FALSE; NS_ASSERTION(NS_FAILED(reason), "huh? successful exception"); // force count of available bytes to zero. mAvailable = 0; if (mCallback) { events.NotifyInputReady(this, mCallback); mCallback = 0; mCallbackFlags = 0; } else if (mBlocked) result = PR_TRUE; return result; } NS_IMETHODIMP_(nsrefcnt) nsPipeInputStream::AddRef(void) { PR_AtomicIncrement((PRInt32*)&mReaderRefCnt); return mPipe->AddRef(); } NS_IMETHODIMP_(nsrefcnt) nsPipeInputStream::Release(void) { if (PR_AtomicDecrement((PRInt32 *)&mReaderRefCnt) == 0) Close(); return mPipe->Release(); } NS_IMPL_QUERY_INTERFACE4(nsPipeInputStream, nsIInputStream, nsIAsyncInputStream, nsISeekableStream, nsISearchableInputStream) NS_IMETHODIMP nsPipeInputStream::CloseWithStatus(nsresult reason) { LOG(("III CloseWithStatus [this=%x reason=%x]\n", this, reason)); if (NS_SUCCEEDED(reason)) reason = NS_BASE_STREAM_CLOSED; mPipe->OnPipeException(reason); return NS_OK; } NS_IMETHODIMP nsPipeInputStream::Close() { return CloseWithStatus(NS_BASE_STREAM_CLOSED); } NS_IMETHODIMP nsPipeInputStream::Available(PRUint32 *result) { nsAutoMonitor mon(mPipe->mMonitor); // return error if pipe closed if (!mAvailable && NS_FAILED(mPipe->mStatus)) return mPipe->mStatus; *result = mAvailable; return NS_OK; } NS_IMETHODIMP nsPipeInputStream::ReadSegments(nsWriteSegmentFun writer, void *closure, PRUint32 count, PRUint32 *readCount) { LOG(("III ReadSegments [this=%x count=%u]\n", this, count)); nsresult rv = NS_OK; const char *segment; PRUint32 segmentLen; *readCount = 0; while (count) { rv = mPipe->GetReadSegment(segment, segmentLen); if (NS_FAILED(rv)) { // ignore this error if we've already read something. if (*readCount > 0) { rv = NS_OK; break; } if (rv == NS_BASE_STREAM_WOULD_BLOCK) { // pipe is empty if (!mBlocking) break; // wait for some data to be written to the pipe rv = Wait(); if (NS_SUCCEEDED(rv)) continue; } // ignore this error, just return. if (rv == NS_BASE_STREAM_CLOSED) { rv = NS_OK; break; } mPipe->OnPipeException(rv); break; } // read no more than count if (segmentLen > count) segmentLen = count; PRUint32 writeCount, originalLen = segmentLen; while (segmentLen) { writeCount = 0; rv = writer(this, closure, segment, *readCount, segmentLen, &writeCount); if (NS_FAILED(rv) || writeCount == 0) { count = 0; // any errors returned from the writer end here: do not // propogate to the caller of ReadSegments. rv = NS_OK; break; } NS_ASSERTION(writeCount <= segmentLen, "wrote more than expected"); segment += writeCount; segmentLen -= writeCount; count -= writeCount; *readCount += writeCount; mLogicalOffset += writeCount; } if (segmentLen < originalLen) mPipe->AdvanceReadCursor(originalLen - segmentLen); } return rv; } NS_IMETHODIMP nsPipeInputStream::Read(char* toBuf, PRUint32 bufLen, PRUint32 *readCount) { return ReadSegments(NS_CopySegmentToBuffer, toBuf, bufLen, readCount); } NS_IMETHODIMP nsPipeInputStream::IsNonBlocking(PRBool *aNonBlocking) { *aNonBlocking = !mBlocking; return NS_OK; } NS_IMETHODIMP nsPipeInputStream::AsyncWait(nsIInputStreamCallback *callback, PRUint32 flags, PRUint32 requestedCount, nsIEventTarget *target) { LOG(("III AsyncWait [this=%x]\n", this)); nsPipeEvents pipeEvents; { nsAutoMonitor mon(mPipe->mMonitor); // replace a pending callback mCallback = 0; mCallbackFlags = 0; nsCOMPtr proxy; if (target) { nsresult rv = NS_NewInputStreamReadyEvent(getter_AddRefs(proxy), callback, target); if (NS_FAILED(rv)) return rv; callback = proxy; } if (NS_FAILED(mPipe->mStatus) || (mAvailable && !(flags & WAIT_CLOSURE_ONLY))) { // stream is already closed or readable; post event. pipeEvents.NotifyInputReady(this, callback); } else { // queue up callback object to be notified when data becomes available mCallback = callback; mCallbackFlags = flags; } } return NS_OK; } NS_IMETHODIMP nsPipeInputStream::Seek(PRInt32 whence, PRInt64 offset) { NS_NOTREACHED("nsPipeInputStream::Seek"); return NS_ERROR_NOT_IMPLEMENTED; } NS_IMETHODIMP nsPipeInputStream::Tell(PRInt64 *offset) { *offset = mLogicalOffset; return NS_OK; } NS_IMETHODIMP nsPipeInputStream::SetEOF() { NS_NOTREACHED("nsPipeInputStream::SetEOF"); return NS_ERROR_NOT_IMPLEMENTED; } #define COMPARE(s1, s2, i) \ (ignoreCase \ ? nsCRT::strncasecmp((const char *)s1, (const char *)s2, (PRUint32)i) \ : nsCRT::strncmp((const char *)s1, (const char *)s2, (PRUint32)i)) NS_IMETHODIMP nsPipeInputStream::Search(const char *forString, PRBool ignoreCase, PRBool *found, PRUint32 *offsetSearchedTo) { LOG(("III Search [for=%s ic=%u]\n", forString, ignoreCase)); nsAutoMonitor mon(mPipe->mMonitor); char *cursor1, *limit1; PRUint32 index = 0, offset = 0; PRUint32 strLen = strlen(forString); mPipe->PeekSegment(0, cursor1, limit1); if (cursor1 == limit1) { *found = PR_FALSE; *offsetSearchedTo = 0; LOG((" result [found=%u offset=%u]\n", *found, *offsetSearchedTo)); return NS_OK; } while (PR_TRUE) { PRUint32 i, len1 = limit1 - cursor1; // check if the string is in the buffer segment for (i = 0; i < len1 - strLen + 1; i++) { if (COMPARE(&cursor1[i], forString, strLen) == 0) { *found = PR_TRUE; *offsetSearchedTo = offset + i; LOG((" result [found=%u offset=%u]\n", *found, *offsetSearchedTo)); return NS_OK; } } // get the next segment char *cursor2, *limit2; PRUint32 len2; index++; offset += len1; mPipe->PeekSegment(index, cursor2, limit2); if (cursor2 == limit2) { *found = PR_FALSE; *offsetSearchedTo = offset - strLen + 1; LOG((" result [found=%u offset=%u]\n", *found, *offsetSearchedTo)); return NS_OK; } len2 = limit2 - cursor2; // check if the string is straddling the next buffer segment PRUint32 lim = PR_MIN(strLen, len2 + 1); for (i = 0; i < lim; ++i) { PRUint32 strPart1Len = strLen - i - 1; PRUint32 strPart2Len = strLen - strPart1Len; const char* strPart2 = &forString[strLen - strPart2Len]; PRUint32 bufSeg1Offset = len1 - strPart1Len; if (COMPARE(&cursor1[bufSeg1Offset], forString, strPart1Len) == 0 && COMPARE(cursor2, strPart2, strPart2Len) == 0) { *found = PR_TRUE; *offsetSearchedTo = offset - strPart1Len; LOG((" result [found=%u offset=%u]\n", *found, *offsetSearchedTo)); return NS_OK; } } // finally continue with the next buffer cursor1 = cursor2; limit1 = limit2; } NS_NOTREACHED("can't get here"); return NS_ERROR_UNEXPECTED; // keep compiler happy } //----------------------------------------------------------------------------- // nsPipeOutputStream methods: //----------------------------------------------------------------------------- nsresult nsPipeOutputStream::Wait() { NS_ASSERTION(mBlocking, "wait on non-blocking pipe output stream"); nsAutoMonitor mon(mPipe->mMonitor); if (NS_SUCCEEDED(mPipe->mStatus) && !mWritable) { LOG(("OOO pipe output: waiting for space\n")); mBlocked = PR_TRUE; mon.Wait(); mBlocked = PR_FALSE; LOG(("OOO pipe output: woke up [pipe-status=%x writable=%u]\n", mPipe->mStatus, mWritable == PR_TRUE)); } return mPipe->mStatus == NS_BASE_STREAM_CLOSED ? NS_OK : mPipe->mStatus; } PRBool nsPipeOutputStream::OnOutputWritable(nsPipeEvents &events) { PRBool result = PR_FALSE; mWritable = PR_TRUE; if (mCallback && !(mCallbackFlags & WAIT_CLOSURE_ONLY)) { events.NotifyOutputReady(this, mCallback); mCallback = 0; mCallbackFlags = 0; } else if (mBlocked) result = PR_TRUE; return result; } PRBool nsPipeOutputStream::OnOutputException(nsresult reason, nsPipeEvents &events) { LOG(("nsPipeOutputStream::OnOutputException [this=%x reason=%x]\n", this, reason)); nsresult result = PR_FALSE; NS_ASSERTION(NS_FAILED(reason), "huh? successful exception"); mWritable = PR_FALSE; if (mCallback) { events.NotifyOutputReady(this, mCallback); mCallback = 0; mCallbackFlags = 0; } else if (mBlocked) result = PR_TRUE; return result; } NS_IMETHODIMP_(nsrefcnt) nsPipeOutputStream::AddRef() { PR_AtomicIncrement((PRInt32*)&mWriterRefCnt); return mPipe->AddRef(); } NS_IMETHODIMP_(nsrefcnt) nsPipeOutputStream::Release() { if (PR_AtomicDecrement((PRInt32 *)&mWriterRefCnt) == 0) Close(); return mPipe->Release(); } NS_IMPL_QUERY_INTERFACE2(nsPipeOutputStream, nsIOutputStream, nsIAsyncOutputStream) NS_IMETHODIMP nsPipeOutputStream::CloseWithStatus(nsresult reason) { LOG(("OOO CloseWithStatus [this=%x reason=%x]\n", this, reason)); if (NS_SUCCEEDED(reason)) reason = NS_BASE_STREAM_CLOSED; // input stream may remain open mPipe->OnPipeException(reason, PR_TRUE); return NS_OK; } NS_IMETHODIMP nsPipeOutputStream::Close() { return CloseWithStatus(NS_BASE_STREAM_CLOSED); } NS_IMETHODIMP nsPipeOutputStream::WriteSegments(nsReadSegmentFun reader, void* closure, PRUint32 count, PRUint32 *writeCount) { LOG(("OOO WriteSegments [this=%x count=%u]\n", this, count)); nsresult rv = NS_OK; char *segment; PRUint32 segmentLen; *writeCount = 0; while (count) { rv = mPipe->GetWriteSegment(segment, segmentLen); if (NS_FAILED(rv)) { if (rv == NS_BASE_STREAM_WOULD_BLOCK) { // pipe is full if (!mBlocking) { // ignore this error if we've already written something if (*writeCount > 0) rv = NS_OK; break; } // wait for the pipe to have an empty segment. rv = Wait(); if (NS_SUCCEEDED(rv)) continue; } mPipe->OnPipeException(rv); break; } // write no more than count if (segmentLen > count) segmentLen = count; PRUint32 readCount, originalLen = segmentLen; while (segmentLen) { readCount = 0; rv = reader(this, closure, segment, *writeCount, segmentLen, &readCount); if (NS_FAILED(rv) || readCount == 0) { count = 0; // any errors returned from the reader end here: do not // propogate to the caller of WriteSegments. rv = NS_OK; break; } NS_ASSERTION(readCount <= segmentLen, "read more than expected"); segment += readCount; segmentLen -= readCount; count -= readCount; *writeCount += readCount; mLogicalOffset += readCount; } if (segmentLen < originalLen) mPipe->AdvanceWriteCursor(originalLen - segmentLen); } return rv; } static NS_METHOD nsReadFromRawBuffer(nsIOutputStream* outStr, void* closure, char* toRawSegment, PRUint32 offset, PRUint32 count, PRUint32 *readCount) { const char* fromBuf = (const char*)closure; memcpy(toRawSegment, &fromBuf[offset], count); *readCount = count; return NS_OK; } NS_IMETHODIMP nsPipeOutputStream::Write(const char* fromBuf, PRUint32 bufLen, PRUint32 *writeCount) { return WriteSegments(nsReadFromRawBuffer, (void*)fromBuf, bufLen, writeCount); } NS_IMETHODIMP nsPipeOutputStream::Flush(void) { // nothing to do return NS_OK; } static NS_METHOD nsReadFromInputStream(nsIOutputStream* outStr, void* closure, char* toRawSegment, PRUint32 offset, PRUint32 count, PRUint32 *readCount) { nsIInputStream* fromStream = (nsIInputStream*)closure; return fromStream->Read(toRawSegment, count, readCount); } NS_IMETHODIMP nsPipeOutputStream::WriteFrom(nsIInputStream* fromStream, PRUint32 count, PRUint32 *writeCount) { return WriteSegments(nsReadFromInputStream, fromStream, count, writeCount); } NS_IMETHODIMP nsPipeOutputStream::IsNonBlocking(PRBool *aNonBlocking) { *aNonBlocking = !mBlocking; return NS_OK; } NS_IMETHODIMP nsPipeOutputStream::AsyncWait(nsIOutputStreamCallback *callback, PRUint32 flags, PRUint32 requestedCount, nsIEventTarget *target) { LOG(("OOO AsyncWait [this=%x]\n", this)); nsPipeEvents pipeEvents; { nsAutoMonitor mon(mPipe->mMonitor); // replace a pending callback mCallback = 0; mCallbackFlags = 0; nsCOMPtr proxy; if (target) { nsresult rv = NS_NewOutputStreamReadyEvent(getter_AddRefs(proxy), callback, target); if (NS_FAILED(rv)) return rv; callback = proxy; } if (NS_FAILED(mPipe->mStatus) || (mWritable && !(flags & WAIT_CLOSURE_ONLY))) { // stream is already closed or writable; post event. pipeEvents.NotifyOutputReady(this, callback); } else { // queue up callback object to be notified when data becomes available mCallback = callback; mCallbackFlags = flags; } } return NS_OK; } NS_IMETHODIMP nsPipeOutputStream::Seek(PRInt32 whence, PRInt64 offset) { NS_NOTREACHED("nsPipeOutputStream::Seek"); return NS_ERROR_NOT_IMPLEMENTED; } NS_IMETHODIMP nsPipeOutputStream::Tell(PRInt64 *offset) { *offset = mLogicalOffset; return NS_OK; } NS_IMETHODIMP nsPipeOutputStream::SetEOF() { NS_NOTREACHED("nsPipeOutputStream::SetEOF"); return NS_ERROR_NOT_IMPLEMENTED; } //////////////////////////////////////////////////////////////////////////////// NS_COM nsresult NS_NewPipe2(nsIAsyncInputStream **pipeIn, nsIAsyncOutputStream **pipeOut, PRBool nonBlockingInput, PRBool nonBlockingOutput, PRUint32 segmentSize, PRUint32 segmentCount, nsIMemory *segmentAlloc) { nsresult rv; nsPipe *pipe = new nsPipe(); if (!pipe) return NS_ERROR_OUT_OF_MEMORY; rv = pipe->Init(nonBlockingInput, nonBlockingOutput, segmentSize, segmentCount, segmentAlloc); if (NS_FAILED(rv)) { NS_ADDREF(pipe); NS_RELEASE(pipe); return rv; } pipe->GetInputStream(pipeIn); pipe->GetOutputStream(pipeOut); return NS_OK; } NS_METHOD nsPipeConstructor(nsISupports *outer, REFNSIID iid, void **result) { if (outer) return NS_ERROR_NO_AGGREGATION; nsPipe *pipe = new nsPipe(); if (!pipe) return NS_ERROR_OUT_OF_MEMORY; NS_ADDREF(pipe); nsresult rv = pipe->QueryInterface(iid, result); NS_RELEASE(pipe); return rv; } ////////////////////////////////////////////////////////////////////////////////