/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- * * The contents of this file are subject to the Netscape Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/NPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is mozilla.org code. * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): */ #include "nsISupports.idl" [scriptable, uuid(4805e684-49b9-11d3-9ce4-ed60bd6cb5bc)] interface nsITableEditor : nsISupports { enum { eNoSearch, ePreviousColumn, ePreviousRow }; /* ------------ Table editing Methods -------------- */ /** Insert table methods * Insert relative to the selected cell or the * cell enclosing the selection anchor * The selection is collapsed and is left in the new cell * at the same row,col location as the original anchor cell * * @param aNumber Number of items to insert * @param aAfter If TRUE, insert after the current cell, * else insert before current cell */ void InsertTableCell(in long aNumber, in boolean aAfter); void InsertTableColumn(in long aNumber, in boolean aAfter); void InsertTableRow(in long aNumber, in boolean aAfter); /** Delete table methods * Delete starting at the selected cell or the * cell (or table) enclosing the selection anchor * The selection is collapsed and is left in the * cell at the same row,col location as * the previous selection anchor, if possible, * else in the closest neigboring cell * * @param aNumber Number of items to insert/delete */ void DeleteTable(); /** Delete just the cell contents * This is what should happen when Delete key is used * for selected cells, to minimize upsetting the table layout */ void DeleteTableCellContents(); /** Delete cell elements as well as contents * @param aNumber Number of contiguous cells, rows, or columns * * When there are more than 1 selected cells, aNumber is ignored. * For Delete Rows or Columns, the complete columns or rows are * determined by the selected cells. E.g., to delete 2 complete rows, * user simply selects a cell in each, and they don't * have to be contiguous. */ void DeleteTableCell(in long aNumber); void DeleteTableColumn(in long aNumber); void DeleteTableRow(in long aNumber); /** Table Selection methods * Selecting a row or column actually * selects all cells (not TR in the case of rows) */ void SelectTableCell(); /** Select a rectangular block of cells: * all cells falling within the row/column index of aStartCell * to through the row/column index of the aEndCell * aStartCell can be any location relative to aEndCell, * as long as they are in the same table * @param aStartCell starting cell in block * @param aEndCell ending cell in block */ void SelectBlockOfCells(in nsIDOMElement aStartCell, in nsIDOMElement aEndCell); void SelectTableRow(); void SelectTableColumn(); void SelectTable(); void SelectAllTableCells(); /** Create a new TD or TH element, the opposite type of the supplied aSourceCell * 1. Copy all attributes from aSourceCell to the new cell * 2. Move all contents of aSourceCell to the new cell * 3. Replace aSourceCell in the table with the new cell * * @param aSourceCell The cell to be replaced * @param aNewCell The new cell that replaces aSourceCell */ void SwitchTableCellHeaderType(in nsIDOMElement aSourceCell, out nsIDOMElement aNewCell); /** Merges contents of all selected cells * for selected cells that are adjacent, * this will result in a larger cell with appropriate * rowspan and colspan, and original cells are deleted * The resulting cell is in the location of the * cell at the upper-left corner of the adjacent * block of selected cells * * @param aMergeNonContiguousContents: * If true: * Non-contiguous cells are not deleted, * but their contents are still moved * to the upper-left cell * If false: contiguous cells are ignored * * If there are no selected cells, * and selection or caret is in a cell, * that cell and the one to the right * are merged */ void JoinTableCells(in boolean aMergeNonContiguousContents); /** Split a cell that has rowspan and/or colspan > 0 * into cells such that all new cells have * rowspan = 1 and colspan = 1 * All of the contents are not touched -- * they will appear to be in the upper-left cell */ void SplitTableCell(); /** Scan through all rows and add cells as needed so * all locations in the cellmap are occupied. * Used after inserting single cells or pasting * a collection of cells that extend past the * previous size of the table * If aTable is null, it uses table enclosing the selection anchor * This doesn't doesn't change the selection, * thus it can be used to fixup all tables * in a page independant of the selection */ void NormalizeTable(in nsIDOMElement aTable); /** Get the row an column index from the layout's cellmap * If aTable is null, it will try to find enclosing table of selection ancho * */ void GetCellIndexes(in nsIDOMElement aCell, out long aRowIndex, out long aColIndex); /** Get the number of rows and columns in a table from the layout's cellmap * If aTable is null, it will try to find enclosing table of selection ancho * Note that all rows in table will not have this many because of * ROWSPAN effects or if table is not "rectangular" (has short rows) */ void GetTableSize(in nsIDOMElement aTable, out long aRowCount, out long aColCount); /** Get a cell element at cellmap grid coordinates * A cell that spans across multiple cellmap locations will * be returned multiple times, once for each location it occupies * * @param aTable A table in the document * @param aRowIndex, aColIndex The 0-based cellmap indexes * * Returns NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found (passes NS_SUCCEEDED macro) * You can scan for all cells in a row or column * by iterating through the appropriate indexes * until the returned aCell is null */ void GetCellAt(in nsIDOMElement aTable, in long aRowIndex, in long aColIndex, out nsIDOMElement aCell); /** Get a cell at cellmap grid coordinates and associated data * A cell that spans across multiple cellmap locations will * be returned multiple times, once for each location it occupies * Examine the returned aStartRowIndex and aStartColIndex to see * if it is in the same layout column or layout row: * A "layout row" is all cells sharing the same top edge * A "layout column" is all cells sharing the same left edge * This is important to determine what to do when inserting or deleting a column or row * * @param aTable A table in the document * @param aRowIndex, aColIndex The 0-based cellmap indexes * returns values: * @param aCell The cell at this cellmap location * @param aStartRowIndex The row index where cell starts * @param aStartColIndex The col index where cell starts * @param aRowSpan May be 0 (to span down entire table) or number of cells spanned * @param aColSpan May be 0 (to span across entire table) or number of cells spanned * @param aActualRowSpan The actual number of cellmap locations (rows) spanned by the cell * @param aActualColSpan The actual number of cellmap locations (columns) spanned by the cell * @param aIsSelected * @param * * Returns NS_EDITOR_ELEMENT_NOT_FOUND if a cell is not found (passes NS_SUCCEEDED macro) */ void GetCellDataAt(in nsIDOMElement aTable, in long aRowIndex, in long aColIndex, out nsIDOMElement aCell, out long aStartRowIndex, out long aStartColIndex, out long aRowSpan, out long aColSpan, out long aActualRowSpan, out long aActualColSpan, out boolean aIsSelected); /** Get the first row element in a table * * @param aTableElement Any TABLE or child-of-table element in the document * @param aRowIndex The 0-based index of the row * * Returns: * @param aRow The row at the requested index * Returns null if there are no rows in table * Returns NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found (passes NS_SUCCEEDED macro) */ void GetFirstRow(in nsIDOMElement aTableElement, out nsIDOMElement aRow); /** Get the next row element starting the search from aTableElement * * @param aTableElement Any TR or child-of-TR element in the document * * Returns: * @param aRow The row to start search from * and the row returned from the search * Returns null if there isn't another row * Returns NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found (passes NS_SUCCEEDED macro) */ void GetNextRow(in nsIDOMElement aTableElement, out nsIDOMElement aRow); /** Preferred direction to search for neighboring cell * when trying to locate a cell to place caret in after * a table editing action. * Used for aDirection param in SetSelectionAfterTableEdit */ /** Reset a selected cell or collapsed selection (the caret) after table editing * * @param aTable A table in the document * @param aRow The row ... * @param aCol ... and column defining the cell * where we will try to place the caret * @param aSelected If true, we select the whole cell instead of setting caret * @param aDirection If cell at (aCol, aRow) is not found, * search for previous cell in the same * column (aPreviousColumn) or row (ePreviousRow) * or don't search for another cell (aNoSearch) * If no cell is found, caret is place just before table; * and if that fails, at beginning of document. * Thus we generally don't worry about the return value * and can use the nsSetSelectionAfterTableEdit stack-based * object to insure we reset the caret in a table-editing method. */ void SetSelectionAfterTableEdit(in nsIDOMElement aTable, in long aRow, in long aCol, in long aDirection, in boolean aSelected); /** Examine the current selection and find * a selected TABLE, TD or TH, or TR element. * or return the parent TD or TH if selection is inside a table cell * Returns null if no table element is found. * * @param aTableElement The table element (table, row, or cell) returned * @param aTagName The tagname of returned element * Note that "td" will be returned if name is actually "th" * @param aSelectedCount How many table elements were selected * This tells us if we have multiple cells selected * (0 if element is a parent cell of selection) * * Returns NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found (passes NS_SUCCEEDED macro) */ void GetSelectedOrParentTableElement(out nsIDOMElement aTableElement, nsString& aTagName, out long aSelectedCount); /** Generally used after GetSelectedOrParentTableElement * to test if selected cells are complete rows or columns * * @param aElement Any table or cell element or any element inside a table * Used to get enclosing table. * If null, selection's anchorNode is used * * @param aSelectionType Returns: * 0 aCellElement was not a cell (returned result = NS_ERROR_FAILURE) * TABLESELECTION_CELL There are 1 or more cells selected * but complete rows or columns are not selected * TABLESELECTION_ROW All cells are in 1 or more rows * and in each row, all cells selected * Note: This is the value if all rows (thus all cells) are selected * TABLESELECTION_COLUMN All cells are in 1 or more columns * and in each column, all cells are selected */ void GetSelectedCellsType(nsIDOMElement *aElement, PRUint32 &aSelectionType); /** Get first selected element from first selection range. * Assumes cell-selection model where each cell * is in a separate range (selection parent node is table row) * @param aCell Selected cell or null if ranges don't contain cell selections * @param aRange Optional: if not null, return the selection range * associated with the cell * Returns NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found (passes NS_SUCCEEDED macro) */ void GetFirstSelectedCell(nsIDOMElement **aCell, nsIDOMRange **aRange); /** Get first selected element from first selection range. * Assumes cell-selection model where each cell * is in a separate range (selection parent node is table row) * @param aCell Selected cell or null if ranges don't contain cell selections * @param aRowIndex Optional: if not null, return the row index of first cell * @param aColIndex Optional: if not null, return the column index of first cell * * Returns NS_EDITOR_ELEMENT_NOT_FOUND if an element is not found (passes NS_SUCCEEDED macro) */ void GetFirstSelectedCellInTable(nsIDOMElement **aCell, PRInt32 *aRowIndex, PRInt32 *aColIndex); /** Get next selected cell element from first selection range. * Assumes cell-selection model where each cell * is in a separate range (selection parent node is table row) * Always call GetFirstSelectedCell() to initialize stored index of "next" cell * @param aCell Selected cell or null if no more selected cells * or ranges don't contain cell selections * @param aRange Optional: if not null, return the selection range * associated with the cell */ void GetNextSelectedCell(nsIDOMElement **aCell, nsIDOMRange **aRange); }; #endif // nsITableEditor_h__