/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "nsCOMPtr.h" #include "nsStyleConsts.h" #include "nsCSSAnonBoxes.h" #include "nsFrame.h" #include "nsIContent.h" #include "nsHTMLAtoms.h" #include "nsPresContext.h" #include "nsIPresShell.h" #include "nsLayoutAtoms.h" #include "nsIDeviceContext.h" #include "nsIRenderingContext.h" #include "nsIFontMetrics.h" #include "nsBlockFrame.h" #include "nsLineBox.h" #include "nsImageFrame.h" #include "nsIServiceManager.h" #include "nsIPercentHeightObserver.h" #include "nsContentUtils.h" #ifdef IBMBIDI #include "nsBidiUtils.h" #endif #ifdef NS_DEBUG #undef NOISY_VERTICAL_ALIGN #else #undef NOISY_VERTICAL_ALIGN #endif // Prefs-driven control for |text-decoration: blink| static PRPackedBool sPrefIsLoaded = PR_FALSE; static PRPackedBool sBlinkIsAllowed = PR_TRUE; enum eNormalLineHeightControl { eUninitialized = -1, eNoExternalLeading = 0, // does not include external leading eIncludeExternalLeading, // use whatever value font vendor provides eCompensateLeading // compensate leading if leading provided by font vendor is not enough }; #ifdef FONT_LEADING_APIS_V2 static eNormalLineHeightControl sNormalLineHeightControl = eUninitialized; #endif #ifdef DEBUG const char* nsHTMLReflowState::ReasonToString(nsReflowReason aReason) { static const char* reasons[] = { "initial", "incremental", "resize", "style-change", "dirty" }; return reasons[aReason]; } #endif // Initialize a root reflow state with a rendering context to // use for measuring things. nsHTMLReflowState::nsHTMLReflowState(nsPresContext* aPresContext, nsIFrame* aFrame, nsReflowReason aReason, nsIRenderingContext* aRenderingContext, const nsSize& aAvailableSpace) : mReflowDepth(0) { NS_PRECONDITION(nsnull != aRenderingContext, "no rendering context"); parentReflowState = nsnull; frame = aFrame; reason = aReason; path = nsnull; availableWidth = aAvailableSpace.width; availableHeight = aAvailableSpace.height; rendContext = aRenderingContext; mSpaceManager = nsnull; mLineLayout = nsnull; mFlags.mSpecialHeightReflow = PR_FALSE; mFlags.mIsTopOfPage = PR_FALSE; mFlags.mUnused = 0; mPercentHeightObserver = nsnull; mPercentHeightReflowInitiator = nsnull; Init(aPresContext); #ifdef IBMBIDI mFlags.mVisualBidiFormControl = IsBidiFormControl(aPresContext); mRightEdge = NS_UNCONSTRAINEDSIZE; #endif } // Initialize a root reflow state for an incremental // reflow. nsHTMLReflowState::nsHTMLReflowState(nsPresContext* aPresContext, nsIFrame* aFrame, nsReflowPath* aReflowPath, nsIRenderingContext* aRenderingContext, const nsSize& aAvailableSpace) : mReflowDepth(0) { NS_PRECONDITION(nsnull != aRenderingContext, "no rendering context"); reason = eReflowReason_Incremental; path = aReflowPath; parentReflowState = nsnull; frame = aFrame; availableWidth = aAvailableSpace.width; availableHeight = aAvailableSpace.height; rendContext = aRenderingContext; mSpaceManager = nsnull; mLineLayout = nsnull; mFlags.mSpecialHeightReflow = PR_FALSE; mFlags.mIsTopOfPage = PR_FALSE; mFlags.mUnused = 0; mPercentHeightObserver = nsnull; mPercentHeightReflowInitiator = nsnull; Init(aPresContext); #ifdef IBMBIDI mFlags.mVisualBidiFormControl = IsBidiFormControl(aPresContext); mRightEdge = NS_UNCONSTRAINEDSIZE; #endif // IBMBIDI } // Initialize a reflow state for a child frames reflow. Some state // is copied from the parent reflow state; the remaining state is // computed. nsHTMLReflowState::nsHTMLReflowState(nsPresContext* aPresContext, const nsHTMLReflowState& aParentReflowState, nsIFrame* aFrame, const nsSize& aAvailableSpace, nsReflowReason aReason, PRBool aInit) : mReflowDepth(aParentReflowState.mReflowDepth + 1), mFlags(aParentReflowState.mFlags) { parentReflowState = &aParentReflowState; frame = aFrame; reason = aReason; if (reason == eReflowReason_Incremental) { // If the child frame isn't along the reflow path, then convert // the incremental reflow to a dirty reflow. path = aParentReflowState.path->GetSubtreeFor(aFrame); if (! path) reason = eReflowReason_Dirty; } else path = nsnull; availableWidth = aAvailableSpace.width; availableHeight = aAvailableSpace.height; rendContext = aParentReflowState.rendContext; mSpaceManager = aParentReflowState.mSpaceManager; mLineLayout = aParentReflowState.mLineLayout; mFlags.mIsTopOfPage = aParentReflowState.mFlags.mIsTopOfPage; mPercentHeightObserver = (aParentReflowState.mPercentHeightObserver && aParentReflowState.mPercentHeightObserver->NeedsToObserve(*this)) ? aParentReflowState.mPercentHeightObserver : nsnull; mPercentHeightReflowInitiator = aParentReflowState.mPercentHeightReflowInitiator; if (aInit) { Init(aPresContext); } #ifdef IBMBIDI mFlags.mVisualBidiFormControl = (aParentReflowState.mFlags.mVisualBidiFormControl) ? PR_TRUE : IsBidiFormControl(aPresContext); mRightEdge = aParentReflowState.mRightEdge; #endif // IBMBIDI } // Same as the previous except that the reason is taken from the // parent's reflow state. nsHTMLReflowState::nsHTMLReflowState(nsPresContext* aPresContext, const nsHTMLReflowState& aParentReflowState, nsIFrame* aFrame, const nsSize& aAvailableSpace) : mReflowDepth(aParentReflowState.mReflowDepth + 1), mFlags(aParentReflowState.mFlags) { parentReflowState = &aParentReflowState; frame = aFrame; reason = aParentReflowState.reason; if (reason == eReflowReason_Incremental) { // If the child frame isn't along the reflow path, then convert // the incremental reflow to a dirty reflow. path = aParentReflowState.path->GetSubtreeFor(aFrame); if (! path) reason = eReflowReason_Dirty; } else path = nsnull; availableWidth = aAvailableSpace.width; availableHeight = aAvailableSpace.height; rendContext = aParentReflowState.rendContext; mSpaceManager = aParentReflowState.mSpaceManager; mLineLayout = aParentReflowState.mLineLayout; mFlags.mIsTopOfPage = aParentReflowState.mFlags.mIsTopOfPage; mPercentHeightObserver = (aParentReflowState.mPercentHeightObserver && aParentReflowState.mPercentHeightObserver->NeedsToObserve(*this)) ? aParentReflowState.mPercentHeightObserver : nsnull; mPercentHeightReflowInitiator = aParentReflowState.mPercentHeightReflowInitiator; Init(aPresContext); #ifdef IBMBIDI mFlags.mVisualBidiFormControl = (aParentReflowState.mFlags.mVisualBidiFormControl) ? PR_TRUE : IsBidiFormControl(aPresContext); mRightEdge = aParentReflowState.mRightEdge; #endif // IBMBIDI } // Version that species the containing block width and height nsHTMLReflowState::nsHTMLReflowState(nsPresContext* aPresContext, const nsHTMLReflowState& aParentReflowState, nsIFrame* aFrame, const nsSize& aAvailableSpace, nscoord aContainingBlockWidth, nscoord aContainingBlockHeight, nsReflowReason aReason) : mReflowDepth(aParentReflowState.mReflowDepth + 1), mFlags(aParentReflowState.mFlags) { parentReflowState = &aParentReflowState; frame = aFrame; reason = aReason; if (reason == eReflowReason_Incremental) { // If the child frame isn't along the reflow path, then convert // the incremental reflow to a dirty reflow. path = aParentReflowState.path->GetSubtreeFor(aFrame); if (! path) reason = eReflowReason_Dirty; } else path = nsnull; availableWidth = aAvailableSpace.width; availableHeight = aAvailableSpace.height; rendContext = aParentReflowState.rendContext; mSpaceManager = aParentReflowState.mSpaceManager; mLineLayout = aParentReflowState.mLineLayout; mFlags.mIsTopOfPage = aParentReflowState.mFlags.mIsTopOfPage; mPercentHeightObserver = (aParentReflowState.mPercentHeightObserver && aParentReflowState.mPercentHeightObserver->NeedsToObserve(*this)) ? aParentReflowState.mPercentHeightObserver : nsnull; mPercentHeightReflowInitiator = aParentReflowState.mPercentHeightReflowInitiator; Init(aPresContext, aContainingBlockWidth, aContainingBlockHeight); #ifdef IBMBIDI mFlags.mVisualBidiFormControl = (aParentReflowState.mFlags.mVisualBidiFormControl) ? PR_TRUE : IsBidiFormControl(aPresContext); mRightEdge = aParentReflowState.mRightEdge; #endif // IBMBIDI } void nsHTMLReflowState::Init(nsPresContext* aPresContext, nscoord aContainingBlockWidth, nscoord aContainingBlockHeight, nsMargin* aBorder, nsMargin* aPadding) { mCompactMarginWidth = 0; #ifdef DEBUG mDebugHook = nsnull; #endif mStylePosition = frame->GetStylePosition(); mStyleDisplay = frame->GetStyleDisplay(); mStyleVisibility = frame->GetStyleVisibility(); mStyleBorder = frame->GetStyleBorder(); mStyleMargin = frame->GetStyleMargin(); mStylePadding = frame->GetStylePadding(); mStyleText = frame->GetStyleText(); InitFrameType(); InitCBReflowState(); InitConstraints(aPresContext, aContainingBlockWidth, aContainingBlockHeight, aBorder, aPadding); } void nsHTMLReflowState::InitCBReflowState() { if (!parentReflowState) { mCBReflowState = nsnull; return; } if (parentReflowState->frame->IsContainingBlock() || // Absolutely positioned frames should always be kids of the frames that // determine their containing block (NS_FRAME_GET_TYPE(mFrameType) == NS_CSS_FRAME_TYPE_ABSOLUTE)) { // a block inside a table cell needs to use the table cell if (parentReflowState->parentReflowState && IS_TABLE_CELL(parentReflowState->parentReflowState->frame->GetType())) { mCBReflowState = parentReflowState->parentReflowState; } else { mCBReflowState = parentReflowState; } return; } mCBReflowState = parentReflowState->mCBReflowState; } const nsHTMLReflowState* nsHTMLReflowState::GetPageBoxReflowState(const nsHTMLReflowState* aParentRS) { // XXX write me as soon as we can ask a frame if it's a page frame... return nsnull; } nscoord nsHTMLReflowState::GetContainingBlockContentWidth(const nsHTMLReflowState* aReflowState) { const nsHTMLReflowState* rs = aReflowState->mCBReflowState; if (!rs) return 0; return rs->mComputedWidth; } void nsHTMLReflowState::InitFrameType() { const nsStyleDisplay *disp = mStyleDisplay; nsCSSFrameType frameType; // Section 9.7 of the CSS2 spec indicates that absolute position // takes precedence over float which takes precedence over display. // Make sure the frame was actually moved out of the flow, and don't // just assume what the style says // XXXldb nsRuleNode::ComputeDisplayData should take care of this, right? if (frame->GetStateBits() & NS_FRAME_OUT_OF_FLOW) { if (disp->IsAbsolutelyPositioned()) { frameType = NS_CSS_FRAME_TYPE_ABSOLUTE; } else { NS_ASSERTION(NS_STYLE_FLOAT_NONE != disp->mFloats, "unknown out of flow frame type"); frameType = NS_CSS_FRAME_TYPE_FLOATING; } } else { switch (disp->mDisplay) { case NS_STYLE_DISPLAY_BLOCK: case NS_STYLE_DISPLAY_LIST_ITEM: case NS_STYLE_DISPLAY_TABLE: case NS_STYLE_DISPLAY_TABLE_CAPTION: frameType = NS_CSS_FRAME_TYPE_BLOCK; break; case NS_STYLE_DISPLAY_INLINE: case NS_STYLE_DISPLAY_MARKER: case NS_STYLE_DISPLAY_INLINE_TABLE: case NS_STYLE_DISPLAY_INLINE_BOX: case NS_STYLE_DISPLAY_INLINE_GRID: case NS_STYLE_DISPLAY_INLINE_STACK: frameType = NS_CSS_FRAME_TYPE_INLINE; break; case NS_STYLE_DISPLAY_RUN_IN: case NS_STYLE_DISPLAY_COMPACT: // XXX need to look ahead at the frame's sibling frameType = NS_CSS_FRAME_TYPE_BLOCK; break; case NS_STYLE_DISPLAY_TABLE_CELL: case NS_STYLE_DISPLAY_TABLE_ROW_GROUP: case NS_STYLE_DISPLAY_TABLE_COLUMN: case NS_STYLE_DISPLAY_TABLE_COLUMN_GROUP: case NS_STYLE_DISPLAY_TABLE_HEADER_GROUP: case NS_STYLE_DISPLAY_TABLE_FOOTER_GROUP: case NS_STYLE_DISPLAY_TABLE_ROW: frameType = NS_CSS_FRAME_TYPE_INTERNAL_TABLE; break; case NS_STYLE_DISPLAY_NONE: default: frameType = NS_CSS_FRAME_TYPE_UNKNOWN; break; } } // See if the frame is replaced if (frame->GetStateBits() & NS_FRAME_REPLACED_ELEMENT) { frameType = NS_FRAME_REPLACED(frameType); } mFrameType = frameType; } void nsHTMLReflowState::ComputeRelativeOffsets(const nsHTMLReflowState* cbrs, nscoord aContainingBlockWidth, nscoord aContainingBlockHeight) { nsStyleCoord coord; // Compute the 'left' and 'right' values. 'Left' moves the boxes to the right, // and 'right' moves the boxes to the left. The computed values are always: // left=-right PRBool leftIsAuto = eStyleUnit_Auto == mStylePosition->mOffset.GetLeftUnit(); PRBool rightIsAuto = eStyleUnit_Auto == mStylePosition->mOffset.GetRightUnit(); // Check for percentage based values and an unconstrained containing // block width. Treat them like 'auto' if (NS_UNCONSTRAINEDSIZE == aContainingBlockWidth) { if (eStyleUnit_Percent == mStylePosition->mOffset.GetLeftUnit()) { leftIsAuto = PR_TRUE; } if (eStyleUnit_Percent == mStylePosition->mOffset.GetRightUnit()) { rightIsAuto = PR_TRUE; } } // If neither 'left' not 'right' are auto, then we're over-constrained and // we ignore one of them if (!leftIsAuto && !rightIsAuto) { const nsStyleVisibility* vis = frame->GetStyleVisibility(); if (NS_STYLE_DIRECTION_LTR == vis->mDirection) { rightIsAuto = PR_TRUE; } else { leftIsAuto = PR_TRUE; } } if (leftIsAuto) { if (rightIsAuto) { // If both are 'auto' (their initial values), the computed values are 0 mComputedOffsets.left = mComputedOffsets.right = 0; } else { // 'Right' isn't 'auto' so compute its value ComputeHorizontalValue(aContainingBlockWidth, mStylePosition->mOffset.GetRightUnit(), mStylePosition->mOffset.GetRight(coord), mComputedOffsets.right); // Computed value for 'left' is minus the value of 'right' mComputedOffsets.left = -mComputedOffsets.right; } } else { NS_ASSERTION(rightIsAuto, "unexpected specified constraint"); // 'Left' isn't 'auto' so compute its value ComputeHorizontalValue(aContainingBlockWidth, mStylePosition->mOffset.GetLeftUnit(), mStylePosition->mOffset.GetLeft(coord), mComputedOffsets.left); // Computed value for 'right' is minus the value of 'left' mComputedOffsets.right = -mComputedOffsets.left; } // Compute the 'top' and 'bottom' values. The 'top' and 'bottom' properties // move relatively positioned elements up and down. They also must be each // other's negative PRBool topIsAuto = eStyleUnit_Auto == mStylePosition->mOffset.GetTopUnit(); PRBool bottomIsAuto = eStyleUnit_Auto == mStylePosition->mOffset.GetBottomUnit(); // Check for percentage based values and a containing block height that // depends on the content height. Treat them like 'auto' if (NS_AUTOHEIGHT == aContainingBlockHeight) { if (eStyleUnit_Percent == mStylePosition->mOffset.GetTopUnit()) { topIsAuto = PR_TRUE; } if (eStyleUnit_Percent == mStylePosition->mOffset.GetBottomUnit()) { bottomIsAuto = PR_TRUE; } } // If neither is 'auto', 'bottom' is ignored if (!topIsAuto && !bottomIsAuto) { bottomIsAuto = PR_TRUE; } if (topIsAuto) { if (bottomIsAuto) { // If both are 'auto' (their initial values), the computed values are 0 mComputedOffsets.top = mComputedOffsets.bottom = 0; } else { // 'Bottom' isn't 'auto' so compute its value ComputeVerticalValue(aContainingBlockHeight, mStylePosition->mOffset.GetBottomUnit(), mStylePosition->mOffset.GetBottom(coord), mComputedOffsets.bottom); // Computed value for 'top' is minus the value of 'bottom' mComputedOffsets.top = -mComputedOffsets.bottom; } } else { NS_ASSERTION(bottomIsAuto, "unexpected specified constraint"); // 'Top' isn't 'auto' so compute its value ComputeVerticalValue(aContainingBlockHeight, mStylePosition->mOffset.GetTopUnit(), mStylePosition->mOffset.GetTop(coord), mComputedOffsets.top); // Computed value for 'bottom' is minus the value of 'top' mComputedOffsets.bottom = -mComputedOffsets.top; } } // Returns the nearest containing block frame for the specified frame. // Also returns the left, top, right, and bottom edges of the specified // frame's content area. These are in the coordinate space of the block // frame itself static nsIFrame* GetNearestContainingBlock(nsIFrame* aFrame, nsMargin& aContentArea) { aFrame = aFrame->GetParent(); while (aFrame) { nsIAtom* frameType = aFrame->GetType(); PRBool isBlock = (frameType == nsLayoutAtoms::blockFrame) || (frameType == nsLayoutAtoms::areaFrame); if (isBlock) { break; } aFrame = aFrame->GetParent(); } if (aFrame) { nsSize size = aFrame->GetSize(); aContentArea.left = 0; aContentArea.top = 0; aContentArea.right = size.width; aContentArea.bottom = size.height; // Subtract off for border and padding. If it can't be computed because // it's percentage based (for example) then just ignore it nsStyleBorderPadding bPad; nsMargin borderPadding; nsStyleContext* styleContext = aFrame->GetStyleContext(); styleContext->GetBorderPaddingFor(bPad); if (bPad.GetBorderPadding(borderPadding)) { aContentArea.left += borderPadding.left; aContentArea.top += borderPadding.top; aContentArea.right -= borderPadding.right; aContentArea.bottom -= borderPadding.bottom; } } return aFrame; } // When determining the hypothetical box that would have been if the element // had been in the flow we may not be able to exactly determine both the left // and right edges. For example, if the element is a non-replaced inline-level // element we would have to reflow it in order to determine it desired width. // In that case depending on the progression direction either the left or // right edge would be marked as not being exact struct nsHypotheticalBox { nscoord mLeft, mRight; nscoord mTop; PRPackedBool mLeftIsExact, mRightIsExact; nsHypotheticalBox() { mLeftIsExact = mRightIsExact = PR_FALSE; } }; static PRBool GetIntrinsicSizeFor(nsIFrame* aFrame, nsSize& aIntrinsicSize) { // See if it is an image frame PRBool result = PR_FALSE; // Currently the only type of replaced frame that we can get the intrinsic // size for is an image frame // XXX We should add back the GetReflowMetrics() function and one of the // things should be the intrinsic size... if (aFrame->GetType() == nsLayoutAtoms::imageFrame) { nsImageFrame* imageFrame = (nsImageFrame*)aFrame; imageFrame->GetIntrinsicImageSize(aIntrinsicSize); result = (aIntrinsicSize != nsSize(0, 0)); } return result; } nscoord nsHTMLReflowState::CalculateHorizBorderPaddingMargin(nscoord aContainingBlockWidth) { nsMargin border, padding, margin; // Get the border if (!mStyleBorder->GetBorder(border)) { // CSS2 has no percentage borders border.SizeTo(0, 0, 0, 0); } // See if the style system can provide us the padding directly if (!mStylePadding->GetPadding(padding)) { nsStyleCoord left, right; // We have to compute the left and right values ComputeHorizontalValue(aContainingBlockWidth, mStylePadding->mPadding.GetLeftUnit(), mStylePadding->mPadding.GetLeft(left), padding.left); ComputeHorizontalValue(aContainingBlockWidth, mStylePadding->mPadding.GetRightUnit(), mStylePadding->mPadding.GetRight(right), padding.right); } // See if the style system can provide us the margin directly if (!mStyleMargin->GetMargin(margin)) { nsStyleCoord left, right; // We have to compute the left and right values if (eStyleUnit_Auto == mStyleMargin->mMargin.GetLeftUnit()) { margin.left = 0; // just ignore } else { ComputeHorizontalValue(aContainingBlockWidth, mStyleMargin->mMargin.GetLeftUnit(), mStyleMargin->mMargin.GetLeft(left), margin.left); } if (eStyleUnit_Auto == mStyleMargin->mMargin.GetRightUnit()) { margin.right = 0; // just ignore } else { ComputeHorizontalValue(aContainingBlockWidth, mStyleMargin->mMargin.GetRightUnit(), mStyleMargin->mMargin.GetRight(right), margin.right); } } return padding.left + padding.right + border.left + border.right + margin.left + margin.right; } static void GetPlaceholderOffset(nsIFrame* aPlaceholderFrame, nsIFrame* aBlockFrame, nsPoint& aOffset) { aOffset = aPlaceholderFrame->GetPosition(); // Convert the placeholder position to the coordinate space of the block // frame that contains it nsIFrame* parent = aPlaceholderFrame->GetParent(); while (parent && (parent != aBlockFrame)) { aOffset += parent->GetPosition(); parent = parent->GetParent(); } } static nsIFrame* FindImmediateChildOf(nsIFrame* aParent, nsIFrame* aDescendantFrame) { nsIFrame* result = aDescendantFrame; while (result) { nsIFrame* parent = result->GetParent(); if (parent == aParent) { break; } // The frame is not an immediate child of aParent so walk up another level result = parent; } return result; } // Calculate the hypothetical box that the element would have if it were in // the flow. The values returned are relative to the padding edge of the // absolute containing block void nsHTMLReflowState::CalculateHypotheticalBox(nsPresContext* aPresContext, nsIFrame* aPlaceholderFrame, nsIFrame* aBlockFrame, nsMargin& aBlockContentArea, const nsHTMLReflowState* cbrs, nsHypotheticalBox& aHypotheticalBox) { NS_ASSERTION(mStyleDisplay->mOriginalDisplay != NS_STYLE_DISPLAY_NONE, "mOriginalDisplay has not been properly initialized"); // If it's a replaced element and it has a 'auto' value for 'width', see if we // can get the intrinsic size. This will allow us to exactly determine both the // left and right edges nsStyleUnit widthUnit = mStylePosition->mWidth.GetUnit(); nsSize intrinsicSize; PRBool knowIntrinsicSize = PR_FALSE; if (NS_FRAME_IS_REPLACED(mFrameType) && (eStyleUnit_Auto == widthUnit)) { // See if we can get the intrinsic size of the element knowIntrinsicSize = GetIntrinsicSizeFor(frame, intrinsicSize); } // See if we can calculate what the box width would have been if the // element had been in the flow nscoord boxWidth; PRBool knowBoxWidth = PR_FALSE; if ((NS_STYLE_DISPLAY_INLINE == mStyleDisplay->mOriginalDisplay) && !NS_FRAME_IS_REPLACED(mFrameType)) { // For non-replaced inline-level elements the 'width' property doesn't apply, // so we don't know what the width would have been without reflowing it } else { // It's either a replaced inline-level element or a block-level element nscoord horizBorderPaddingMargin; // Determine the total amount of horizontal border/padding/margin that // the element would have had if it had been in the flow. Note that we // ignore any 'auto' and 'inherit' values horizBorderPaddingMargin = CalculateHorizBorderPaddingMargin(aBlockContentArea.right - aBlockContentArea.left); if (NS_FRAME_IS_REPLACED(mFrameType) && (eStyleUnit_Auto == widthUnit)) { // It's a replaced element with an 'auto' width so the box width is // its intrinsic size plus any border/padding/margin if (knowIntrinsicSize) { boxWidth = intrinsicSize.width + horizBorderPaddingMargin; knowBoxWidth = PR_TRUE; } } else if (eStyleUnit_Auto == widthUnit) { // The box width is the containing block width boxWidth = aBlockContentArea.right - aBlockContentArea.left; knowBoxWidth = PR_TRUE; } else { // We need to compute it. It's important we do this, because if it's // percentage based this computed value may be different from the comnputed // value calculated using the absolute containing block width ComputeHorizontalValue(aBlockContentArea.right - aBlockContentArea.left, widthUnit, mStylePosition->mWidth, boxWidth); boxWidth += horizBorderPaddingMargin; knowBoxWidth = PR_TRUE; } } // Get the 'direction' of the block const nsStyleVisibility* blockVis = aBlockFrame->GetStyleVisibility(); // Get the placeholder x-offset and y-offset in the coordinate // space of the block frame that contains it // XXXbz the placeholder is not fully reflown yet if our containing block is // relatively positioned... nsPoint placeholderOffset; GetPlaceholderOffset(aPlaceholderFrame, aBlockFrame, placeholderOffset); // First, determine the hypothetical box's mTop if (aBlockFrame) { // We need the immediate child of the block frame, and that may not be // the placeholder frame nsBlockFrame* blockFrame = NS_STATIC_CAST(nsBlockFrame*, aBlockFrame); nsIFrame *blockChild = FindImmediateChildOf(aBlockFrame, aPlaceholderFrame); nsBlockFrame::line_iterator lineBox = blockFrame->FindLineFor(blockChild); // How we determine the hypothetical box depends on whether the element // would have been inline-level or block-level if (NS_STYLE_DISPLAY_INLINE == mStyleDisplay->mOriginalDisplay) { // Use the top of the inline box which the placeholder lives in as the // hypothetical box's top. aHypotheticalBox.mTop = lineBox->mBounds.y; } else { // The element would have been block-level which means it would be below // the line containing the placeholder frame, unless all the frames // before it are empty. In that case, it would have been just before // this line. // XXXbz the line box is not fully reflown yet if our containing block is // relatively positioned... if (lineBox != blockFrame->end_lines()) { nsIFrame * firstFrame = lineBox->mFirstChild; while (firstFrame != aPlaceholderFrame) { NS_ASSERTION(firstFrame, "Must reach our placeholder before end of list!"); if (!firstFrame) // This can be removed when we split out-of-flow break; // frames correctly, see bug 223064 if (!firstFrame->IsEmpty()) { break; } firstFrame = firstFrame->GetNextSibling(); } if (firstFrame == aPlaceholderFrame) { // The top of the hypothetical box is the top of the line containing // the placeholder, since there is nothing in the line before our // placeholder except empty frames. aHypotheticalBox.mTop = lineBox->mBounds.y; } else { // The top of the hypothetical box is just below the line containing // the placeholder. aHypotheticalBox.mTop = lineBox->mBounds.YMost(); } } else { // Just use the placeholder's y-offset aHypotheticalBox.mTop = placeholderOffset.y; } } } // Second, determine the hypothetical box's mLeft & mRight // To determine the left and right offsets we need to look at the block's 'direction' if (NS_STYLE_DIRECTION_LTR == blockVis->mDirection) { // How we determine the hypothetical box depends on whether the element // would have been inline-level or block-level if (NS_STYLE_DISPLAY_INLINE == mStyleDisplay->mOriginalDisplay) { // The placeholder represents the left edge of the hypothetical box aHypotheticalBox.mLeft = placeholderOffset.x; } else { aHypotheticalBox.mLeft = aBlockContentArea.left; } aHypotheticalBox.mLeftIsExact = PR_TRUE; if (knowBoxWidth) { aHypotheticalBox.mRight = aHypotheticalBox.mLeft + boxWidth; aHypotheticalBox.mRightIsExact = PR_TRUE; } else { // We can't compute the right edge because we don't know the desired // width. So instead use the right content edge of the block parent, // but remember it's not exact aHypotheticalBox.mRight = aBlockContentArea.right; aHypotheticalBox.mRightIsExact = PR_FALSE; } } else { // The placeholder represents the right edge of the hypothetical box if (NS_STYLE_DISPLAY_INLINE == mStyleDisplay->mOriginalDisplay) { aHypotheticalBox.mRight = placeholderOffset.x; } else { aHypotheticalBox.mRight = aBlockContentArea.right; } aHypotheticalBox.mRightIsExact = PR_TRUE; if (knowBoxWidth) { aHypotheticalBox.mLeft = aHypotheticalBox.mRight - boxWidth; aHypotheticalBox.mLeftIsExact = PR_TRUE; } else { // We can't compute the left edge because we don't know the desired // width. So instead use the left content edge of the block parent, // but remember it's not exact aHypotheticalBox.mLeft = aBlockContentArea.left; aHypotheticalBox.mLeftIsExact = PR_FALSE; } } // The current coordinate space is that of the nearest block to the placeholder. // Convert to the coordinate space of the absolute containing block nsIFrame* absoluteContainingBlock = cbrs->frame; if (aBlockFrame != absoluteContainingBlock) { nsIFrame* parent; nsIFrame* stop; if (NS_FRAME_GET_TYPE(cbrs->mFrameType) == NS_CSS_FRAME_TYPE_INLINE) { // The absolute containing block is an inline frame... so it will be a // descendant of aBlockFrame parent = absoluteContainingBlock; stop = aBlockFrame; } else { // aBlockFrame may be a descendant of absoluteContainingBlock parent = aBlockFrame; stop = absoluteContainingBlock; } do { nsPoint origin = parent->GetPosition(); aHypotheticalBox.mLeft += origin.x; aHypotheticalBox.mRight += origin.x; aHypotheticalBox.mTop += origin.y; // Move up the tree one level parent = parent->GetParent(); } while (parent && parent != stop); } // The specified offsets are relative to the absolute containing block's // padding edge or content edge, and our current values are relative to the // border edge, so translate. if (NS_FRAME_GET_TYPE(cbrs->mFrameType) == NS_CSS_FRAME_TYPE_INLINE) { // content edge const nsMargin& borderPadding = cbrs->mComputedBorderPadding; aHypotheticalBox.mLeft -= borderPadding.left; aHypotheticalBox.mRight -= borderPadding.right; aHypotheticalBox.mTop -= borderPadding.top; } else { // padding edge nsMargin border = cbrs->mComputedBorderPadding - cbrs->mComputedPadding; aHypotheticalBox.mLeft -= border.left; aHypotheticalBox.mRight -= border.right; aHypotheticalBox.mTop -= border.top; } } void nsHTMLReflowState::InitAbsoluteConstraints(nsPresContext* aPresContext, const nsHTMLReflowState* cbrs, nscoord containingBlockWidth, nscoord containingBlockHeight) { NS_PRECONDITION(containingBlockHeight != NS_AUTOHEIGHT, "containing block height must be constrained"); // Get the placeholder frame nsIFrame* placeholderFrame; aPresContext->PresShell()->GetPlaceholderFrameFor(frame, &placeholderFrame); NS_ASSERTION(nsnull != placeholderFrame, "no placeholder frame"); // Find the nearest containing block frame to the placeholder frame, // and return its content area left, top, right, and bottom edges nsMargin blockContentArea; nsIFrame* blockFrame = GetNearestContainingBlock(placeholderFrame, blockContentArea); // If both 'left' and 'right' are 'auto' or both 'top' and 'bottom' are // 'auto', then compute the hypothetical box of where the element would // have been if it had been in the flow nsHypotheticalBox hypotheticalBox; if (((eStyleUnit_Auto == mStylePosition->mOffset.GetLeftUnit()) && (eStyleUnit_Auto == mStylePosition->mOffset.GetRightUnit())) || ((eStyleUnit_Auto == mStylePosition->mOffset.GetTopUnit()) && (eStyleUnit_Auto == mStylePosition->mOffset.GetBottomUnit()))) { CalculateHypotheticalBox(aPresContext, placeholderFrame, blockFrame, blockContentArea, cbrs, hypotheticalBox); } // Initialize the 'left' and 'right' computed offsets // XXX Handle new 'static-position' value... PRBool leftIsAuto = PR_FALSE, rightIsAuto = PR_FALSE; nsStyleCoord coord; if (eStyleUnit_Auto == mStylePosition->mOffset.GetLeftUnit()) { mComputedOffsets.left = 0; leftIsAuto = PR_TRUE; } else { ComputeHorizontalValue(containingBlockWidth, mStylePosition->mOffset.GetLeftUnit(), mStylePosition->mOffset.GetLeft(coord), mComputedOffsets.left); } if (eStyleUnit_Auto == mStylePosition->mOffset.GetRightUnit()) { mComputedOffsets.right = 0; rightIsAuto = PR_TRUE; } else { ComputeHorizontalValue(containingBlockWidth, mStylePosition->mOffset.GetRightUnit(), mStylePosition->mOffset.GetRight(coord), mComputedOffsets.right); } PRUint8 direction = mStyleVisibility->mDirection; // Initialize the 'width' computed value nsStyleUnit widthUnit = mStylePosition->mWidth.GetUnit(); PRBool widthIsAuto = (eStyleUnit_Auto == widthUnit); if (!widthIsAuto) { // Use the specified value for the computed width ComputeHorizontalValue(containingBlockWidth, widthUnit, mStylePosition->mWidth, mComputedWidth); AdjustComputedWidth(PR_TRUE); } // See if none of 'left', 'width', and 'right', is 'auto' if (!leftIsAuto && !widthIsAuto && !rightIsAuto) { // See whether we're over-constrained PRInt32 availBoxSpace = containingBlockWidth - mComputedOffsets.left - mComputedOffsets.right; PRInt32 availContentSpace = availBoxSpace - mComputedBorderPadding.left - mComputedBorderPadding.right; if (availContentSpace < mComputedWidth) { // We're over-constrained so use 'direction' to dictate which value to // ignore if (NS_STYLE_DIRECTION_LTR == direction) { // Ignore the specified value for 'right' mComputedOffsets.right = containingBlockWidth - mComputedOffsets.left - mComputedBorderPadding.left - mComputedWidth - mComputedBorderPadding.right; } else { // Ignore the specified value for 'left' mComputedOffsets.left = containingBlockWidth - mComputedBorderPadding.left - mComputedWidth - mComputedBorderPadding.right - mComputedOffsets.right; } } else { // Calculate any 'auto' margin values PRBool marginLeftIsAuto = (eStyleUnit_Auto == mStyleMargin->mMargin.GetLeftUnit()); PRBool marginRightIsAuto = (eStyleUnit_Auto == mStyleMargin->mMargin.GetRightUnit()); PRInt32 availMarginSpace = availContentSpace - mComputedWidth; if (marginLeftIsAuto) { if (marginRightIsAuto) { // Both 'margin-left' and 'margin-right' are 'auto', so they get // equal values mComputedMargin.left = availMarginSpace / 2; mComputedMargin.right = availMarginSpace - mComputedMargin.left; } else { // Just 'margin-left' is 'auto' mComputedMargin.left = availMarginSpace - mComputedMargin.right; } } else { // Just 'margin-right' is 'auto' mComputedMargin.right = availMarginSpace - mComputedMargin.left; } } } else { // See if all three of 'left', 'width', and 'right', are 'auto' if (leftIsAuto && widthIsAuto && rightIsAuto) { // Use the 'direction' to dictate whether 'left' or 'right' is // treated like 'static-position' if (NS_STYLE_DIRECTION_LTR == direction) { if (hypotheticalBox.mLeftIsExact) { mComputedOffsets.left = hypotheticalBox.mLeft; leftIsAuto = PR_FALSE; } else { // Well, we don't know 'left' so we have to use 'right' and // then solve for 'left' mComputedOffsets.right = hypotheticalBox.mRight; rightIsAuto = PR_FALSE; } } else { if (hypotheticalBox.mRightIsExact) { mComputedOffsets.right = containingBlockWidth - hypotheticalBox.mRight; rightIsAuto = PR_FALSE; } else { // Well, we don't know 'right' so we have to use 'left' and // then solve for 'right' mComputedOffsets.left = hypotheticalBox.mLeft; leftIsAuto = PR_FALSE; } } } // At this point we know that at least one of 'left', 'width', and 'right' // is 'auto', but not all three. Examine the various combinations if (widthIsAuto) { if (leftIsAuto || rightIsAuto) { if (NS_FRAME_IS_REPLACED(mFrameType)) { // For a replaced element we use the intrinsic size mComputedWidth = NS_INTRINSICSIZE; } else { // The width is shrink-to-fit but constrained by the containing block width mComputedWidth = NS_SHRINKWRAPWIDTH; PRInt32 maxWidth = containingBlockWidth; if (NS_UNCONSTRAINEDSIZE != maxWidth) { maxWidth -= mComputedOffsets.left + mComputedMargin.left + mComputedBorderPadding.left + mComputedBorderPadding.right + mComputedMargin.right + mComputedOffsets.right; } if (maxWidth <= 0) { maxWidth = 1; } if (mComputedMaxWidth > maxWidth) { mComputedMaxWidth = maxWidth; } } if (leftIsAuto) { mComputedOffsets.left = NS_AUTOOFFSET; // solve for 'left' } else { mComputedOffsets.right = NS_AUTOOFFSET; // solve for 'right' } } else { // Only 'width' is 'auto' so just solve for 'width' mComputedWidth = containingBlockWidth - mComputedOffsets.left - mComputedMargin.left - mComputedBorderPadding.left - mComputedBorderPadding.right - mComputedMargin.right - mComputedOffsets.right; mComputedWidth = PR_MAX(mComputedWidth, 0); AdjustComputedWidth(PR_FALSE); // XXX If the direction is rtl then we need to reevaluate left... } } else { // Either 'left' or 'right' or both is 'auto' if (leftIsAuto && rightIsAuto) { // Use the 'direction' to dictate whether 'left' or 'right' is treated like // 'static-position' if (NS_STYLE_DIRECTION_LTR == direction) { if (hypotheticalBox.mLeftIsExact) { mComputedOffsets.left = hypotheticalBox.mLeft; leftIsAuto = PR_FALSE; } else { // Well, we don't know 'left' so we have to use 'right' and // then solve for 'left' mComputedOffsets.right = hypotheticalBox.mRight; rightIsAuto = PR_FALSE; } } else { if (hypotheticalBox.mRightIsExact) { mComputedOffsets.right = containingBlockWidth - hypotheticalBox.mRight; rightIsAuto = PR_FALSE; } else { // Well, we don't know 'right' so we have to use 'left' and // then solve for 'right' mComputedOffsets.left = hypotheticalBox.mLeft; leftIsAuto = PR_FALSE; } } } if (leftIsAuto) { // Solve for 'left' mComputedOffsets.left = containingBlockWidth - mComputedMargin.left - mComputedBorderPadding.left - mComputedWidth - mComputedBorderPadding.right - mComputedMargin.right - mComputedOffsets.right; } else if (rightIsAuto) { // Solve for 'right' mComputedOffsets.right = containingBlockWidth - mComputedOffsets.left - mComputedMargin.left - mComputedBorderPadding.left - mComputedWidth - mComputedBorderPadding.right - mComputedMargin.right; } } } // Initialize the 'top' and 'bottom' computed offsets nsStyleUnit heightUnit = mStylePosition->mHeight.GetUnit(); PRBool topIsAuto = PR_FALSE, bottomIsAuto = PR_FALSE; if (eStyleUnit_Auto == mStylePosition->mOffset.GetTopUnit()) { mComputedOffsets.top = 0; topIsAuto = PR_TRUE; } else { nsStyleCoord c; ComputeVerticalValue(containingBlockHeight, mStylePosition->mOffset.GetTopUnit(), mStylePosition->mOffset.GetTop(c), mComputedOffsets.top); } if (eStyleUnit_Auto == mStylePosition->mOffset.GetBottomUnit()) { mComputedOffsets.bottom = 0; bottomIsAuto = PR_TRUE; } else { nsStyleCoord c; ComputeVerticalValue(containingBlockHeight, mStylePosition->mOffset.GetBottomUnit(), mStylePosition->mOffset.GetBottom(c), mComputedOffsets.bottom); } // Initialize the 'height' computed value PRBool heightIsAuto = (eStyleUnit_Auto == heightUnit); if (!heightIsAuto) { // Use the specified value for the computed height ComputeVerticalValue(containingBlockHeight, heightUnit, mStylePosition->mHeight, mComputedHeight); AdjustComputedHeight(PR_TRUE); } // See if none of 'top', 'height', and 'bottom', is 'auto' if (!topIsAuto && !heightIsAuto && !bottomIsAuto) { // See whether we're over-constrained PRInt32 availBoxSpace = containingBlockHeight - mComputedOffsets.top - mComputedOffsets.bottom; PRInt32 availContentSpace = availBoxSpace - mComputedBorderPadding.top - mComputedBorderPadding.bottom; if (availContentSpace < mComputedHeight) { // We're over-constrained so ignore the specified value for 'bottom' mComputedOffsets.bottom = containingBlockHeight - mComputedOffsets.top - mComputedBorderPadding.top - mComputedHeight - mComputedBorderPadding.bottom; } else { // Calculate any 'auto' margin values PRBool marginTopIsAuto = (eStyleUnit_Auto == mStyleMargin->mMargin.GetTopUnit()); PRBool marginBottomIsAuto = (eStyleUnit_Auto == mStyleMargin->mMargin.GetBottomUnit()); PRInt32 availMarginSpace = availContentSpace - mComputedHeight; if (marginTopIsAuto) { if (marginBottomIsAuto) { // Both 'margin-top' and 'margin-bottom' are 'auto', so they get // equal values mComputedMargin.top = availMarginSpace / 2; mComputedMargin.bottom = availMarginSpace - mComputedMargin.top; } else { // Just 'margin-top' is 'auto' mComputedMargin.top = availMarginSpace - mComputedMargin.bottom; } } else { // Just 'margin-bottom' is 'auto' mComputedMargin.bottom = availMarginSpace - mComputedMargin.top; } } } else { // See if all three of 'top', 'height', and 'bottom', are 'auto' if (topIsAuto && heightIsAuto && bottomIsAuto) { // Treat 'top' like 'static-position' mComputedOffsets.top = hypotheticalBox.mTop; topIsAuto = PR_FALSE; } // At this point we know that at least one of 'top', 'height', and 'bottom' // is 'auto', but not all three. Examine the various combinations if (heightIsAuto) { if (topIsAuto || bottomIsAuto) { if (NS_FRAME_IS_REPLACED(mFrameType)) { // For a replaced element we use the intrinsic size mComputedHeight = NS_INTRINSICSIZE; } else { // The height is based on the content mComputedHeight = NS_AUTOHEIGHT; } if (topIsAuto) { mComputedOffsets.top = NS_AUTOOFFSET; // solve for 'top' } else { mComputedOffsets.bottom = NS_AUTOOFFSET; // solve for 'bottom' } } else { // Only 'height' is 'auto' so just solve for 'height' mComputedHeight = containingBlockHeight - mComputedOffsets.top - mComputedMargin.top - mComputedBorderPadding.top - mComputedBorderPadding.bottom - mComputedMargin.bottom - mComputedOffsets.bottom; mComputedHeight = PR_MAX(mComputedHeight, 0); AdjustComputedHeight(PR_FALSE); } } else { // Either 'top' or 'bottom' or both is 'auto' if (topIsAuto && bottomIsAuto) { // Treat 'top' like 'static-position' mComputedOffsets.top = hypotheticalBox.mTop; topIsAuto = PR_FALSE; } if (topIsAuto) { // Solve for 'top' mComputedOffsets.top = containingBlockHeight - mComputedMargin.top - mComputedBorderPadding.top - mComputedHeight - mComputedBorderPadding.bottom - mComputedMargin.bottom - mComputedOffsets.bottom; } else if (bottomIsAuto) { // Solve for 'bottom' mComputedOffsets.bottom = containingBlockHeight - mComputedOffsets.top - mComputedMargin.top - mComputedBorderPadding.top - mComputedHeight - mComputedBorderPadding.bottom - mComputedMargin.bottom; } } } // Now that we've solved for our auto offsets and so forth, we need to adjust // the offsets to what the rest of layout actually expects them to be. The // offsets as computed now are relative to the parent's padding edge if the // parent is a block and the parent's content edge if the parent is an // inline. We need them to be relative to the parent's padding edge for // nsAbsoluteContainer reflow to work right. if (NS_FRAME_GET_TYPE(cbrs->mFrameType) == NS_CSS_FRAME_TYPE_INLINE) { mComputedOffsets += cbrs->mComputedPadding; } } static PRBool IsInitialContainingBlock(nsIFrame* aFrame) { nsIContent* content = aFrame->GetContent(); if (content && !content->GetParent()) { // The containing block corresponds to the document element so it's // the initial containing block return PR_TRUE; } return PR_FALSE; } nscoord GetVerticalMarginBorderPadding(const nsHTMLReflowState* aReflowState) { nscoord result = 0; if (!aReflowState) return result; // zero auto margins nsMargin margin = aReflowState->mComputedMargin; if (NS_AUTOMARGIN == margin.top) margin.top = 0; if (NS_AUTOMARGIN == margin.bottom) margin.bottom = 0; result += margin.top + margin.bottom; result += aReflowState->mComputedBorderPadding.top + aReflowState->mComputedBorderPadding.bottom; return result; } /* Get the height based on the viewport of the containing block specified * in aReflowState when the containing block has mComputedHeight == NS_AUTOHEIGHT * This will walk up the chain of containing blocks looking for a computed height * until it finds the canvas frame, or it encounters a frame that is not a block, * area, or scroll frame. This handles compatibility with IE (see bug 85016 and bug 219693) * * When we encounter scrolledContent area frames, we skip over them, since they are guaranteed to not be useful for computing the containing block. */ nscoord CalcQuirkContainingBlockHeight(const nsHTMLReflowState& aReflowState) { nsHTMLReflowState* firstAncestorRS = nsnull; // a candidate for html frame nsHTMLReflowState* secondAncestorRS = nsnull; // a candidate for body frame // initialize the default to NS_AUTOHEIGHT as this is the containings block // computed height when this function is called. It is possible that we // don't alter this height especially if we are restricted to one level nscoord result = NS_AUTOHEIGHT; const nsHTMLReflowState* rs = &aReflowState; for (; rs && rs->frame; rs = (nsHTMLReflowState *)(rs->parentReflowState)) { nsIAtom* frameType = rs->frame->GetType(); // if the ancestor is auto height then skip it and continue up if it // is the first block/area frame and possibly the body/html if (nsLayoutAtoms::blockFrame == frameType || nsLayoutAtoms::areaFrame == frameType || nsLayoutAtoms::scrollFrame == frameType) { if (nsLayoutAtoms::areaFrame == frameType) { // Skip over scrolled-content area frames if (rs->frame->GetStyleContext()->GetPseudoType() == nsCSSAnonBoxes::scrolledContent) { continue; } } secondAncestorRS = firstAncestorRS; firstAncestorRS = (nsHTMLReflowState*)rs; // If the current frame we're looking at is positioned, we don't want to // go any further (see bug 221784). The behavior we want here is: 1) If // not auto-height, use this as the percentage base. 2) If auto-height, // keep looking, unless the frame is positioned. if (NS_AUTOHEIGHT == rs->mComputedHeight) { if (rs->frame->GetStyleDisplay()->IsAbsolutelyPositioned()) { break; } else { continue; } } } else if (nsLayoutAtoms::canvasFrame == frameType) { // Use scroll frames' computed height if we have one, this will // allow us to get viewport height for native scrollbars. nsHTMLReflowState* scrollState = (nsHTMLReflowState *)rs->parentReflowState; if (nsLayoutAtoms::scrollFrame == scrollState->frame->GetType()) { rs = scrollState; } } else if (nsLayoutAtoms::pageContentFrame == frameType) { nsIFrame* prevInFlow; rs->frame->GetPrevInFlow(&prevInFlow); // only use the page content frame for a height basis if it is the first in flow if (prevInFlow) break; } else { break; } // if the ancestor is the page content frame then the percent base is // the avail height, otherwise it is the computed height result = (nsLayoutAtoms::pageContentFrame == frameType) ? rs->availableHeight : rs->mComputedHeight; // if unconstrained - don't sutract borders - would result in huge height if (NS_AUTOHEIGHT == result) return result; // if we got to the canvas or page content frame, then subtract out // margin/border/padding for the BODY and HTML elements if ((nsLayoutAtoms::canvasFrame == frameType) || (nsLayoutAtoms::pageContentFrame == frameType)) { result -= GetVerticalMarginBorderPadding(firstAncestorRS); result -= GetVerticalMarginBorderPadding(secondAncestorRS); #ifdef DEBUG // make sure the first ancestor is the HTML and the second is the BODY if (firstAncestorRS) { nsIContent* frameContent = firstAncestorRS->frame->GetContent(); if (frameContent) { nsIAtom *contentTag = frameContent->Tag(); NS_ASSERTION(contentTag == nsHTMLAtoms::html, "First ancestor is not HTML"); } } if (secondAncestorRS) { nsIContent* frameContent = secondAncestorRS->frame->GetContent(); if (frameContent) { nsIAtom *contentTag = frameContent->Tag(); NS_ASSERTION(contentTag == nsHTMLAtoms::body, "Second ancestor is not BODY"); } } #endif } // if we got to the html frame, then subtract out // margin/border/padding for the BODY element else if (nsLayoutAtoms::areaFrame == frameType) { // make sure it is the body if (nsLayoutAtoms::canvasFrame == rs->parentReflowState->frame->GetType()) { result -= GetVerticalMarginBorderPadding(secondAncestorRS); } } break; } return result; } // Called by InitConstraints() to compute the containing block rectangle for // the element. Handles the special logic for absolutely positioned elements void nsHTMLReflowState::ComputeContainingBlockRectangle(nsPresContext* aPresContext, const nsHTMLReflowState* aContainingBlockRS, nscoord& aContainingBlockWidth, nscoord& aContainingBlockHeight) { // Unless the element is absolutely positioned, the containing block is // formed by the content edge of the nearest block-level ancestor aContainingBlockWidth = aContainingBlockRS->mComputedWidth; aContainingBlockHeight = aContainingBlockRS->mComputedHeight; if (NS_FRAME_GET_TYPE(mFrameType) == NS_CSS_FRAME_TYPE_ABSOLUTE) { // See if the ancestor is block-level or inline-level if (NS_FRAME_GET_TYPE(aContainingBlockRS->mFrameType) == NS_CSS_FRAME_TYPE_INLINE) { // Base our size on the actual size of the frame. In cases when this is // completely bogus (eg initial reflow), this code shouldn't even be // called, since the code in nsPositionedInlineFrame::Reflow will pass in // the containing block dimensions to our constructor. // XXXbz we should be taking the in-flows into account too, but // that's very hard. aContainingBlockWidth = aContainingBlockRS->frame->GetRect().width - (aContainingBlockRS->mComputedBorderPadding.left + aContainingBlockRS->mComputedBorderPadding.right); NS_ASSERTION(aContainingBlockWidth >= 0, "Negative containing block width!"); aContainingBlockHeight = aContainingBlockRS->frame->GetRect().height - (aContainingBlockRS->mComputedBorderPadding.top + aContainingBlockRS->mComputedBorderPadding.bottom); NS_ASSERTION(aContainingBlockHeight >= 0, "Negative containing block height!"); } else { // If the ancestor is block-level, the containing block is formed by the // padding edge of the ancestor aContainingBlockWidth += aContainingBlockRS->mComputedPadding.left + aContainingBlockRS->mComputedPadding.right; // If the containing block is the initial containing block and it has a // height that depends on its content, then use the viewport height instead. // This gives us a reasonable value against which to compute percentage // based heights and to do bottom relative positioning if ((NS_AUTOHEIGHT == aContainingBlockHeight) && IsInitialContainingBlock(aContainingBlockRS->frame)) { // Use the viewport height as the containing block height const nsHTMLReflowState* rs = aContainingBlockRS->parentReflowState; while (rs) { aContainingBlockHeight = rs->mComputedHeight; rs = rs->parentReflowState; } } else { aContainingBlockHeight += aContainingBlockRS->mComputedPadding.top + aContainingBlockRS->mComputedPadding.bottom; } } } else { // If this is an unconstrained reflow, then reset the containing block // width to NS_UNCONSTRAINEDSIZE. This way percentage based values have // no effect if (NS_UNCONSTRAINEDSIZE == availableWidth) { aContainingBlockWidth = NS_UNCONSTRAINEDSIZE; } // an element in quirks mode gets a containing block based on looking for a // parent with a non-auto height if the element has a percent height if (NS_AUTOHEIGHT == aContainingBlockHeight) { if (eCompatibility_NavQuirks == aPresContext->CompatibilityMode() && mStylePosition->mHeight.GetUnit() == eStyleUnit_Percent) { aContainingBlockHeight = CalcQuirkContainingBlockHeight(*aContainingBlockRS); } } } } // Prefs callback to pick up changes PR_STATIC_CALLBACK(int) PrefsChanged(const char *aPrefName, void *instance) { sBlinkIsAllowed = nsContentUtils::GetBoolPref("browser.blink_allowed", sBlinkIsAllowed); return 0; /* PREF_OK */ } // Check to see if |text-decoration: blink| is allowed. The first time // called, register the callback and then force-load the pref. After that, // just use the cached value. static PRBool BlinkIsAllowed(void) { if (!sPrefIsLoaded) { // Set up a listener and check the initial value nsContentUtils::RegisterPrefCallback("browser.blink_allowed", PrefsChanged, nsnull); PrefsChanged(nsnull, nsnull); sPrefIsLoaded = PR_TRUE; } return sBlinkIsAllowed; } #ifdef FONT_LEADING_APIS_V2 static eNormalLineHeightControl GetNormalLineHeightCalcControl(void) { if (sNormalLineHeightControl == eUninitialized) { // browser.display.normal_lineheight_calc_control is not user // changable, so no need to register callback for it. sNormalLineHeightControl = NS_STATIC_CAST(eNormalLineHeightControl, nsContentUtils::GetIntPref("browser.display.normal_lineheight_calc_control", eNoExternalLeading)); } return sNormalLineHeightControl; } #endif // XXX refactor this code to have methods for each set of properties // we are computing: width,height,line-height; margin; offsets void nsHTMLReflowState::InitConstraints(nsPresContext* aPresContext, nscoord aContainingBlockWidth, nscoord aContainingBlockHeight, nsMargin* aBorder, nsMargin* aPadding) { // If this is the root frame, then set the computed width and // height equal to the available space if (nsnull == parentReflowState) { mComputedWidth = availableWidth; mComputedHeight = availableHeight; mComputedMargin.SizeTo(0, 0, 0, 0); mComputedPadding.SizeTo(0, 0, 0, 0); mComputedBorderPadding.SizeTo(0, 0, 0, 0); mComputedOffsets.SizeTo(0, 0, 0, 0); mComputedMinWidth = mComputedMinHeight = 0; mComputedMaxWidth = mComputedMaxHeight = NS_UNCONSTRAINEDSIZE; } else { // Get the containing block reflow state const nsHTMLReflowState* cbrs = mCBReflowState; NS_ASSERTION(nsnull != cbrs, "no containing block"); // If we weren't given a containing block width and height, then // compute one if (aContainingBlockWidth == -1) { ComputeContainingBlockRectangle(aPresContext, cbrs, aContainingBlockWidth, aContainingBlockHeight); } #if 0 nsFrame::ListTag(stdout, frame); printf(": cb="); nsFrame::ListTag(stdout, cbrs->frame); printf(" size=%d,%d\n", aContainingBlockWidth, aContainingBlockHeight); #endif // See if the containing block height is based on the size of its // content nsIAtom* fType; if (NS_AUTOHEIGHT == aContainingBlockHeight) { // See if the containing block is (1) a scrolled frame, i.e. its // parent is a scroll frame. The presence of the intervening // frame (that the scroll frame scrolls) needs to be hidden from // the containingBlockHeight calcuation, or (2) a cell frame which needs // to use the mComputedHeight of the cell instead of what the cell block passed in. if (cbrs->parentReflowState) { nsIFrame* f = cbrs->parentReflowState->frame; fType = f->GetType(); if (nsLayoutAtoms::scrollFrame == fType) { // Use the scroll frame's computed height instead aContainingBlockHeight = cbrs->parentReflowState->mComputedHeight; } else { fType = cbrs->frame->GetType(); if (IS_TABLE_CELL(fType)) { // use the cell's computed height aContainingBlockHeight = cbrs->mComputedHeight; } } } } // Compute margins from the specified margin style information. These // become the default computed values, and may be adjusted below // XXX fix to provide 0,0 for the top&bottom margins for // inline-non-replaced elements ComputeMargin(aContainingBlockWidth, cbrs); if (aPadding) { // padding is an input arg mComputedPadding.top = aPadding->top; mComputedPadding.right = aPadding->right; mComputedPadding.bottom = aPadding->bottom; mComputedPadding.left = aPadding->left; } else { ComputePadding(aContainingBlockWidth, cbrs); } if (aBorder) { // border is an input arg mComputedBorderPadding.top = aBorder->top; mComputedBorderPadding.right = aBorder->right; mComputedBorderPadding.bottom = aBorder->bottom; mComputedBorderPadding.left = aBorder->left; } else { if (!mStyleBorder->GetBorder(mComputedBorderPadding)) { // CSS2 has no percentage borders mComputedBorderPadding.SizeTo(0, 0, 0, 0); } } mComputedBorderPadding += mComputedPadding; nsStyleUnit widthUnit = mStylePosition->mWidth.GetUnit(); nsStyleUnit heightUnit = mStylePosition->mHeight.GetUnit(); // Check for a percentage based width and an unconstrained containing // block width if (eStyleUnit_Percent == widthUnit) { if (NS_UNCONSTRAINEDSIZE == aContainingBlockWidth) { widthUnit = eStyleUnit_Auto; } } // Check for a percentage based height and a containing block height // that depends on the content height if (eStyleUnit_Percent == heightUnit) { if (NS_AUTOHEIGHT == aContainingBlockHeight) { // this if clause enables %-height on replaced inline frames, // such as images. See bug 54119. The else clause "heightUnit = eStyleUnit_Auto;" // used to be called exclusively. if (NS_FRAME_REPLACED(NS_CSS_FRAME_TYPE_INLINE) == mFrameType) { // Get the containing block reflow state NS_ASSERTION(nsnull != cbrs, "no containing block"); // in quirks mode, get the cb height using the special quirk method if (eCompatibility_NavQuirks == aPresContext->CompatibilityMode()) { if (!IS_TABLE_CELL(fType)) { aContainingBlockHeight = CalcQuirkContainingBlockHeight(*cbrs); if (aContainingBlockHeight == NS_AUTOHEIGHT) { heightUnit = eStyleUnit_Auto; } } else { heightUnit = eStyleUnit_Auto; } } // in standard mode, use the cb height. if it's "auto", as will be the case // by default in BODY, use auto height as per CSS2 spec. else { if (NS_AUTOHEIGHT != cbrs->mComputedHeight) aContainingBlockHeight = cbrs->mComputedHeight; else heightUnit = eStyleUnit_Auto; } } else { // default to interpreting the height like 'auto' heightUnit = eStyleUnit_Auto; } } } // Compute our offsets if the element is relatively positioned. We need // the correct containing block width and height here, which is why we need // to do it after all the quirks-n-such above. if (NS_STYLE_POSITION_RELATIVE == mStyleDisplay->mPosition) { ComputeRelativeOffsets(cbrs, aContainingBlockWidth, aContainingBlockHeight); } else { // Initialize offsets to 0 mComputedOffsets.SizeTo(0, 0, 0, 0); } // Calculate the computed values for min and max properties ComputeMinMaxValues(aContainingBlockWidth, aContainingBlockHeight, cbrs); // Calculate the computed width and height. This varies by frame type if ((NS_FRAME_REPLACED(NS_CSS_FRAME_TYPE_INLINE) == mFrameType) || (NS_FRAME_REPLACED(NS_CSS_FRAME_TYPE_FLOATING) == mFrameType)) { // Inline replaced element and floating replaced element are basically // treated the same. First calculate the computed width if (eStyleUnit_Auto == widthUnit) { // A specified value of 'auto' uses the element's intrinsic width mComputedWidth = NS_INTRINSICSIZE; } else { ComputeHorizontalValue(aContainingBlockWidth, widthUnit, mStylePosition->mWidth, mComputedWidth); } AdjustComputedWidth(PR_TRUE); // Now calculate the computed height if (eStyleUnit_Auto == heightUnit) { // A specified value of 'auto' uses the element's intrinsic height mComputedHeight = NS_INTRINSICSIZE; } else { ComputeVerticalValue(aContainingBlockHeight, heightUnit, mStylePosition->mHeight, mComputedHeight); } AdjustComputedHeight(PR_TRUE); } else if (NS_CSS_FRAME_TYPE_FLOATING == mFrameType) { // Floating non-replaced element. First calculate the computed width if (eStyleUnit_Auto == widthUnit) { if ((NS_UNCONSTRAINEDSIZE == aContainingBlockWidth) && (eStyleUnit_Percent == mStylePosition->mWidth.GetUnit())) { // The element has a percentage width, but since the containing // block width is unconstrained we set 'widthUnit' to 'auto' // above. However, we want the element to be unconstrained, too mComputedWidth = NS_UNCONSTRAINEDSIZE; } else if (NS_STYLE_DISPLAY_TABLE == mStyleDisplay->mDisplay) { // It's an outer table because an inner table is not positioned // shrink wrap its width since the outer table is anonymous mComputedWidth = NS_SHRINKWRAPWIDTH; } else { // The CSS2 spec says the computed width should be 0; however, that's // not what Nav and IE do and even the spec doesn't really want that // to happen. // // Instead, have the element shrink wrap its width mComputedWidth = NS_SHRINKWRAPWIDTH; // Limnit the width to the containing block width nscoord widthFromCB = aContainingBlockWidth; if (NS_UNCONSTRAINEDSIZE != widthFromCB) { widthFromCB -= mComputedBorderPadding.left + mComputedBorderPadding.right + mComputedMargin.left + mComputedMargin.right; } if (mComputedMaxWidth > widthFromCB) { mComputedMaxWidth = widthFromCB; } } } else { ComputeHorizontalValue(aContainingBlockWidth, widthUnit, mStylePosition->mWidth, mComputedWidth); } // Take into account minimum and maximum sizes AdjustComputedWidth(PR_TRUE); // Now calculate the computed height if (eStyleUnit_Auto == heightUnit) { mComputedHeight = NS_AUTOHEIGHT; // let it choose its height } else { ComputeVerticalValue(aContainingBlockHeight, heightUnit, mStylePosition->mHeight, mComputedHeight); } AdjustComputedHeight(PR_TRUE); } else if (NS_CSS_FRAME_TYPE_INTERNAL_TABLE == mFrameType) { // Internal table elements. The rules vary depending on the type. // Calculate the computed width PRBool rowOrRowGroup = PR_FALSE; if ((NS_STYLE_DISPLAY_TABLE_ROW == mStyleDisplay->mDisplay) || (NS_STYLE_DISPLAY_TABLE_ROW_GROUP == mStyleDisplay->mDisplay)) { // 'width' property doesn't apply to table rows and row groups widthUnit = eStyleUnit_Auto; rowOrRowGroup = PR_TRUE; } if (eStyleUnit_Auto == widthUnit) { mComputedWidth = availableWidth; if ((mComputedWidth != NS_UNCONSTRAINEDSIZE) && !rowOrRowGroup){ // Internal table elements don't have margins. Only tables and // cells have border and padding mComputedWidth -= mComputedBorderPadding.left + mComputedBorderPadding.right; } } else { ComputeHorizontalValue(aContainingBlockWidth, widthUnit, mStylePosition->mWidth, mComputedWidth); } // Calculate the computed height if ((NS_STYLE_DISPLAY_TABLE_COLUMN == mStyleDisplay->mDisplay) || (NS_STYLE_DISPLAY_TABLE_COLUMN_GROUP == mStyleDisplay->mDisplay)) { // 'height' property doesn't apply to table columns and column groups heightUnit = eStyleUnit_Auto; } if (eStyleUnit_Auto == heightUnit) { mComputedHeight = NS_AUTOHEIGHT; } else { ComputeVerticalValue(aContainingBlockHeight, heightUnit, mStylePosition->mHeight, mComputedHeight); } // Doesn't apply to table elements mComputedMinWidth = mComputedMinHeight = 0; mComputedMaxWidth = mComputedMaxHeight = NS_UNCONSTRAINEDSIZE; } else if (NS_FRAME_GET_TYPE(mFrameType) == NS_CSS_FRAME_TYPE_ABSOLUTE) { // XXX not sure if this belongs here or somewhere else - cwk InitAbsoluteConstraints(aPresContext, cbrs, aContainingBlockWidth, aContainingBlockHeight); } else if (NS_CSS_FRAME_TYPE_INLINE == mFrameType) { // Inline non-replaced elements do not have computed widths or heights // XXX add this check to HaveFixedContentHeight/Width too mComputedWidth = NS_UNCONSTRAINEDSIZE; mComputedHeight = NS_UNCONSTRAINEDSIZE; mComputedMargin.top = 0; mComputedMargin.bottom = 0; mComputedMinWidth = mComputedMinHeight = 0; mComputedMaxWidth = mComputedMaxHeight = NS_UNCONSTRAINEDSIZE; } else { ComputeBlockBoxData(aPresContext, cbrs, widthUnit, heightUnit, aContainingBlockWidth, aContainingBlockHeight); } } // Check for blinking text and permission to display it mFlags.mBlinks = (parentReflowState && parentReflowState->mFlags.mBlinks); if (!mFlags.mBlinks && BlinkIsAllowed()) { const nsStyleTextReset* st = frame->GetStyleTextReset(); mFlags.mBlinks = ((st->mTextDecoration & NS_STYLE_TEXT_DECORATION_BLINK) != 0); } } // Compute the box data for block and block-replaced elements in the // normal flow. void nsHTMLReflowState::ComputeBlockBoxData(nsPresContext* aPresContext, const nsHTMLReflowState* cbrs, nsStyleUnit aWidthUnit, nsStyleUnit aHeightUnit, nscoord aContainingBlockWidth, nscoord aContainingBlockHeight) { // Compute the content width if (eStyleUnit_Auto == aWidthUnit) { if (NS_FRAME_IS_REPLACED(mFrameType)) { // Block-level replaced element in the flow. A specified value of // 'auto' uses the element's intrinsic width (CSS2 10.3.4) mComputedWidth = NS_INTRINSICSIZE; } else { // Block-level non-replaced element in the flow. 'auto' values // for margin-left and margin-right become 0, and the sum of the // areas must equal the width of the content-area of the parent // element. if (NS_UNCONSTRAINEDSIZE == availableWidth) { // During pass1 table reflow, auto side margin values are // uncomputable (== 0). mComputedWidth = NS_UNCONSTRAINEDSIZE; } else if (NS_SHRINKWRAPWIDTH == aContainingBlockWidth) { // The containing block should shrink wrap its width, so have // the child block do the same mComputedWidth = NS_UNCONSTRAINEDSIZE; // Let its content area be as wide as the containing block's max width // minus any margin and border/padding nscoord maxWidth = cbrs->mComputedMaxWidth; if (NS_UNCONSTRAINEDSIZE != maxWidth) { maxWidth -= mComputedMargin.left + mComputedBorderPadding.left + mComputedMargin.right + mComputedBorderPadding.right; } if (maxWidth < mComputedMaxWidth) { mComputedMaxWidth = maxWidth; } } else { // tables act like replaced elements regarding mComputedWidth nsIAtom* fType = frame->GetType(); if (nsLayoutAtoms::tableOuterFrame == fType) { mComputedWidth = 0; // XXX temp fix for trees } else if ((nsLayoutAtoms::tableFrame == fType) || (nsLayoutAtoms::tableCaptionFrame == fType)) { mComputedWidth = NS_SHRINKWRAPWIDTH; if (eStyleUnit_Auto == mStyleMargin->mMargin.GetLeftUnit()) { mComputedMargin.left = NS_AUTOMARGIN; } if (eStyleUnit_Auto == mStyleMargin->mMargin.GetRightUnit()) { mComputedMargin.right = NS_AUTOMARGIN; } } else { mComputedWidth = availableWidth - mComputedMargin.left - mComputedMargin.right - mComputedBorderPadding.left - mComputedBorderPadding.right; mComputedWidth = PR_MAX(mComputedWidth, 0); } AdjustComputedWidth(PR_FALSE); CalculateBlockSideMargins(cbrs->mComputedWidth, mComputedWidth); } } } else { ComputeHorizontalValue(aContainingBlockWidth, aWidthUnit, mStylePosition->mWidth, mComputedWidth); AdjustComputedWidth(PR_TRUE); // Now that we have the computed-width, compute the side margins CalculateBlockSideMargins(cbrs->mComputedWidth, mComputedWidth); } // Compute the content height if (eStyleUnit_Auto == aHeightUnit) { if (NS_FRAME_IS_REPLACED(mFrameType)) { // For replaced elements use the intrinsic size for "auto" mComputedHeight = NS_INTRINSICSIZE; } else { // For non-replaced elements auto means unconstrained mComputedHeight = NS_UNCONSTRAINEDSIZE; } } else { ComputeVerticalValue(aContainingBlockHeight, aHeightUnit, mStylePosition->mHeight, mComputedHeight); } AdjustComputedHeight(PR_TRUE); } // This code enforces section 10.3.3 of the CSS2 spec for this formula: // // 'margin-left' + 'border-left-width' + 'padding-left' + 'width' + // 'padding-right' + 'border-right-width' + 'margin-right' // = width of containing block // // Note: the width unit is not auto when this is called void nsHTMLReflowState::CalculateBlockSideMargins(nscoord aAvailWidth, nscoord aComputedWidth) { // Because of the ugly way we do intrinsic sizing within Reflow, this method // doesn't necessarily produce the right results. The results will be // adjusted in nsBlockReflowContext::AlignBlockHorizontally after reflow. // The code for tables is particularly sensitive to regressions; the // numerous |isTable| checks are technically incorrect, but necessary // for basic testcases. // We can only provide values for auto side margins in a constrained // reflow. For unconstrained reflow there is no effective width to // compute against... if (NS_UNCONSTRAINEDSIZE == aComputedWidth || NS_UNCONSTRAINEDSIZE == aAvailWidth) return; nscoord sum = mComputedMargin.left + mComputedBorderPadding.left + aComputedWidth + mComputedBorderPadding.right + mComputedMargin.right; if (sum == aAvailWidth) // The sum is already correct return; // Determine the left and right margin values. The width value // remains constant while we do this. PRBool isTable = mStyleDisplay->mDisplay == NS_STYLE_DISPLAY_TABLE || mStyleDisplay->mDisplay == NS_STYLE_DISPLAY_TABLE_CAPTION; // Calculate how much space is available for margins nscoord availMarginSpace = aAvailWidth - sum; // XXXldb Should this be quirks-mode only? And why captions? if (isTable) // XXXldb Why does this break things so badly if this is changed to // availMarginSpace += mComputedBorderPadding.left + // mComputedBorderPadding.right; availMarginSpace = aAvailWidth - aComputedWidth; // If the available margin space is negative, then don't follow the // usual overconstraint rules. if (availMarginSpace < 0) { if (!isTable) { if (mStyleVisibility->mDirection == NS_STYLE_DIRECTION_LTR) { mComputedMargin.right += availMarginSpace; } else { mComputedMargin.left += availMarginSpace; } } else { mComputedMargin.left = 0; mComputedMargin.right = 0; if (mStyleVisibility->mDirection == NS_STYLE_DIRECTION_RTL) { mComputedMargin.left = availMarginSpace; } } return; } // The css2 spec clearly defines how block elements should behave // in section 10.3.3. PRBool isAutoLeftMargin = eStyleUnit_Auto == mStyleMargin->mMargin.GetLeftUnit(); PRBool isAutoRightMargin = eStyleUnit_Auto == mStyleMargin->mMargin.GetRightUnit(); if (!isAutoLeftMargin && !isAutoRightMargin && !isTable) { // Neither margin is 'auto' so we're over constrained. Use the // 'direction' property of the parent to tell which margin to // ignore // First check if there is an HTML alignment that we should honor const nsHTMLReflowState* prs = parentReflowState; if (prs && (prs->mStyleText->mTextAlign == NS_STYLE_TEXT_ALIGN_MOZ_CENTER || prs->mStyleText->mTextAlign == NS_STYLE_TEXT_ALIGN_MOZ_RIGHT)) { isAutoLeftMargin = PR_TRUE; isAutoRightMargin = prs->mStyleText->mTextAlign == NS_STYLE_TEXT_ALIGN_MOZ_CENTER; } // Otherwise apply the CSS rules, and ignore one margin by forcing // it to 'auto', depending on 'direction'. else if (NS_STYLE_DIRECTION_LTR == mStyleVisibility->mDirection) { isAutoRightMargin = PR_TRUE; } else { isAutoLeftMargin = PR_TRUE; } } // Logic which is common to blocks and tables if (isAutoLeftMargin) { if (isAutoRightMargin) { // Both margins are 'auto' so their computed values are equal mComputedMargin.left = availMarginSpace / 2; mComputedMargin.right = availMarginSpace - mComputedMargin.left; } else { mComputedMargin.left = availMarginSpace; } } else if (isAutoRightMargin) { mComputedMargin.right = availMarginSpace; } } PRBool nsHTMLReflowState::UseComputedHeight() { static PRBool useComputedHeight = PR_FALSE; #if defined(XP_UNIX) || defined(XP_WIN) || defined(XP_OS2) || defined(XP_BEOS) static PRBool firstTime = 1; if (firstTime) { if (getenv("GECKO_USE_COMPUTED_HEIGHT")) { useComputedHeight = PR_TRUE; } firstTime = 0; } #endif return useComputedHeight; } #define NORMAL_LINE_HEIGHT_FACTOR 1.2f // in term of emHeight // For "normal" we use the font's normal line height (em height + leading). // If both internal leading and external leading specified by font itself // are zeros, we should compensate this by creating extra (external) leading // in eCompensateLeading mode. This is necessary because without this // compensation, normal line height might looks too tight. // For risk management, we use preference to control the behavior, and // eNoExternalLeading is the old behavior. static nscoord GetNormalLineHeight(nsIFontMetrics* aFontMetrics) { NS_PRECONDITION(nsnull != aFontMetrics, "no font metrics"); nscoord normalLineHeight; #ifdef FONT_LEADING_APIS_V2 nscoord externalLeading, internalLeading, emHeight; aFontMetrics->GetExternalLeading(externalLeading); aFontMetrics->GetInternalLeading(internalLeading); aFontMetrics->GetEmHeight(emHeight); switch (GetNormalLineHeightCalcControl()) { case eIncludeExternalLeading: normalLineHeight = emHeight+ internalLeading + externalLeading; break; case eCompensateLeading: if (!internalLeading && !externalLeading) normalLineHeight = NSToCoordRound(emHeight * NORMAL_LINE_HEIGHT_FACTOR); else normalLineHeight = emHeight+ internalLeading + externalLeading; break; default: //case eNoExternalLeading: normalLineHeight = emHeight + internalLeading; } #else aFontMetrics->GetNormalLineHeight(normalLineHeight); #endif // FONT_LEADING_APIS_V2 return normalLineHeight; } static nscoord ComputeLineHeight(nsPresContext* aPresContext, nsIRenderingContext* aRenderingContext, nsStyleContext* aStyleContext) { NS_PRECONDITION(nsnull != aRenderingContext, "no rendering context"); nscoord lineHeight = -1; const nsStyleText* text = aStyleContext->GetStyleText(); const nsStyleFont* font = aStyleContext->GetStyleFont(); const nsStyleVisibility* vis = aStyleContext->GetStyleVisibility(); nsStyleUnit unit = text->mLineHeight.GetUnit(); if (unit == eStyleUnit_Coord) { // For length values just use the pre-computed value lineHeight = text->mLineHeight.GetCoordValue(); } else { nsCOMPtr deviceContext; aRenderingContext->GetDeviceContext(*getter_AddRefs(deviceContext)); nsCOMPtr fm; deviceContext->GetMetricsFor(font->mFont, vis->mLangGroup, *getter_AddRefs(fm)); if (unit == eStyleUnit_Factor) { // For factor units the computed value of the line-height property // is found by multiplying the factor by the font's actual // em height. float factor; factor = text->mLineHeight.GetFactorValue(); // Note: we normally use the actual font height for computing the // line-height raw value from the style context. On systems where // they disagree the actual font height is more appropriate. This // little hack lets us override that behavior to allow for more // precise layout in the face of imprecise fonts. nscoord emHeight = font->mFont.size; if (!nsHTMLReflowState::UseComputedHeight()) { fm->GetEmHeight(emHeight); } lineHeight = NSToCoordRound(factor * emHeight); } else { NS_ASSERTION(eStyleUnit_Normal == unit, "bad unit"); lineHeight = font->mFont.size; if (!nsHTMLReflowState::UseComputedHeight()) { lineHeight = GetNormalLineHeight(fm); } } } return lineHeight; } nscoord nsHTMLReflowState::CalcLineHeight(nsPresContext* aPresContext, nsIRenderingContext* aRenderingContext, nsIFrame* aFrame) { NS_ASSERTION(aFrame && aFrame->GetStyleContext(), "Bogus data passed in to CalcLineHeight"); nscoord lineHeight = ComputeLineHeight(aPresContext, aRenderingContext, aFrame->GetStyleContext()); NS_ASSERTION(lineHeight >= 0, "ComputeLineHeight screwed up"); return lineHeight; } void nsHTMLReflowState::ComputeHorizontalValue(nscoord aContainingBlockWidth, nsStyleUnit aUnit, const nsStyleCoord& aCoord, nscoord& aResult) { aResult = 0; if (eStyleUnit_Percent == aUnit) { if (NS_UNCONSTRAINEDSIZE == aContainingBlockWidth) { aResult = 0; } else { float pct = aCoord.GetPercentValue(); aResult = NSToCoordFloor(aContainingBlockWidth * pct); } } else if (eStyleUnit_Coord == aUnit) { aResult = aCoord.GetCoordValue(); } else if (eStyleUnit_Chars == aUnit) { if ((nsnull == rendContext) || (nsnull == frame)) { // We can't compute it without a rendering context or frame, so // pretend its zero... } else { nsStyleContext* styleContext = frame->GetStyleContext(); SetFontFromStyle(rendContext, styleContext); nscoord fontWidth; rendContext->GetWidth('M', fontWidth); aResult = aCoord.GetIntValue() * fontWidth; } } } void nsHTMLReflowState::ComputeVerticalValue(nscoord aContainingBlockHeight, nsStyleUnit aUnit, const nsStyleCoord& aCoord, nscoord& aResult) { aResult = 0; if (eStyleUnit_Percent == aUnit) { // Verify no one is trying to calculate a percentage based height against // a height that's shrink wrapping to its content. In that case they should // treat the specified value like 'auto' NS_ASSERTION(NS_AUTOHEIGHT != aContainingBlockHeight, "unexpected containing block height"); if (NS_AUTOHEIGHT!=aContainingBlockHeight) { float pct = aCoord.GetPercentValue(); aResult = NSToCoordFloor(aContainingBlockHeight * pct); } else { // safest thing to do for an undefined height is to make it 0 aResult = 0; } } else if (eStyleUnit_Coord == aUnit) { aResult = aCoord.GetCoordValue(); } } void nsHTMLReflowState::ComputeMargin(nscoord aContainingBlockWidth, const nsHTMLReflowState* aContainingBlockRS) { // If style style can provide us the margin directly, then use it. if (!mStyleMargin->GetMargin(mComputedMargin)) { // We have to compute the value if (NS_UNCONSTRAINEDSIZE == aContainingBlockWidth) { mComputedMargin.left = 0; mComputedMargin.right = 0; if (eStyleUnit_Coord == mStyleMargin->mMargin.GetLeftUnit()) { nsStyleCoord left; mStyleMargin->mMargin.GetLeft(left), mComputedMargin.left = left.GetCoordValue(); } if (eStyleUnit_Coord == mStyleMargin->mMargin.GetRightUnit()) { nsStyleCoord right; mStyleMargin->mMargin.GetRight(right), mComputedMargin.right = right.GetCoordValue(); } } else { nsStyleCoord left, right; ComputeHorizontalValue(aContainingBlockWidth, mStyleMargin->mMargin.GetLeftUnit(), mStyleMargin->mMargin.GetLeft(left), mComputedMargin.left); ComputeHorizontalValue(aContainingBlockWidth, mStyleMargin->mMargin.GetRightUnit(), mStyleMargin->mMargin.GetRight(right), mComputedMargin.right); } const nsHTMLReflowState* rs2 = GetPageBoxReflowState(parentReflowState); nsStyleCoord top, bottom; if (nsnull != rs2) { // According to the CSS2 spec, margin percentages are // calculated with respect to the *height* of the containing // block when in a paginated context. ComputeVerticalValue(rs2->mComputedHeight, mStyleMargin->mMargin.GetTopUnit(), mStyleMargin->mMargin.GetTop(top), mComputedMargin.top); ComputeVerticalValue(rs2->mComputedHeight, mStyleMargin->mMargin.GetBottomUnit(), mStyleMargin->mMargin.GetBottom(bottom), mComputedMargin.bottom); } else { // According to the CSS2 spec, margin percentages are // calculated with respect to the *width* of the containing // block, even for margin-top and margin-bottom. ComputeHorizontalValue(aContainingBlockWidth, mStyleMargin->mMargin.GetTopUnit(), mStyleMargin->mMargin.GetTop(top), mComputedMargin.top); ComputeHorizontalValue(aContainingBlockWidth, mStyleMargin->mMargin.GetBottomUnit(), mStyleMargin->mMargin.GetBottom(bottom), mComputedMargin.bottom); } } } void nsHTMLReflowState::ComputePadding(nscoord aContainingBlockWidth, const nsHTMLReflowState* aContainingBlockRS) { // If style can provide us the padding directly, then use it. if (!mStylePadding->GetPadding(mComputedPadding)) { // We have to compute the value nsStyleCoord left, right, top, bottom; ComputeHorizontalValue(aContainingBlockWidth, mStylePadding->mPadding.GetLeftUnit(), mStylePadding->mPadding.GetLeft(left), mComputedPadding.left); ComputeHorizontalValue(aContainingBlockWidth, mStylePadding->mPadding.GetRightUnit(), mStylePadding->mPadding.GetRight(right), mComputedPadding.right); // According to the CSS2 spec, percentages are calculated with respect to // containing block width for padding-top and padding-bottom ComputeHorizontalValue(aContainingBlockWidth, mStylePadding->mPadding.GetTopUnit(), mStylePadding->mPadding.GetTop(top), mComputedPadding.top); ComputeHorizontalValue(aContainingBlockWidth, mStylePadding->mPadding.GetBottomUnit(), mStylePadding->mPadding.GetBottom(bottom), mComputedPadding.bottom); } // a table row/col group, row/col doesn't have padding if (frame) { nsIAtom* frameType = frame->GetType(); if ((nsLayoutAtoms::tableRowGroupFrame == frameType) || (nsLayoutAtoms::tableColGroupFrame == frameType) || (nsLayoutAtoms::tableRowFrame == frameType) || (nsLayoutAtoms::tableColFrame == frameType)) { mComputedPadding.top = 0; mComputedPadding.right = 0; mComputedPadding.bottom = 0; mComputedPadding.left = 0; } } } void nsHTMLReflowState::ComputeMinMaxValues(nscoord aContainingBlockWidth, nscoord aContainingBlockHeight, const nsHTMLReflowState* aContainingBlockRS) { nsStyleUnit minWidthUnit = mStylePosition->mMinWidth.GetUnit(); ComputeHorizontalValue(aContainingBlockWidth, minWidthUnit, mStylePosition->mMinWidth, mComputedMinWidth); nsStyleUnit maxWidthUnit = mStylePosition->mMaxWidth.GetUnit(); if (eStyleUnit_Null == maxWidthUnit) { // Specified value of 'none' mComputedMaxWidth = NS_UNCONSTRAINEDSIZE; // no limit } else { ComputeHorizontalValue(aContainingBlockWidth, maxWidthUnit, mStylePosition->mMaxWidth, mComputedMaxWidth); } // If the computed value of 'min-width' is greater than the value of // 'max-width', 'max-width' is set to the value of 'min-width' if (mComputedMinWidth > mComputedMaxWidth) { mComputedMaxWidth = mComputedMinWidth; } nsStyleUnit minHeightUnit = mStylePosition->mMinHeight.GetUnit(); // Check for percentage based values and a containing block height that // depends on the content height. Treat them like 'auto' if ((NS_AUTOHEIGHT == aContainingBlockHeight) && (eStyleUnit_Percent == minHeightUnit)) { mComputedMinHeight = 0; } else { ComputeVerticalValue(aContainingBlockHeight, minHeightUnit, mStylePosition->mMinHeight, mComputedMinHeight); } nsStyleUnit maxHeightUnit = mStylePosition->mMaxHeight.GetUnit(); if (eStyleUnit_Null == maxHeightUnit) { // Specified value of 'none' mComputedMaxHeight = NS_UNCONSTRAINEDSIZE; // no limit } else { // Check for percentage based values and a containing block height that // depends on the content height. Treat them like 'auto' if ((NS_AUTOHEIGHT == aContainingBlockHeight) && (eStyleUnit_Percent == maxHeightUnit)) { mComputedMaxHeight = NS_UNCONSTRAINEDSIZE; } else { ComputeVerticalValue(aContainingBlockHeight, maxHeightUnit, mStylePosition->mMaxHeight, mComputedMaxHeight); } } // If the computed value of 'min-height' is greater than the value of // 'max-height', 'max-height' is set to the value of 'min-height' if (mComputedMinHeight > mComputedMaxHeight) { mComputedMaxHeight = mComputedMinHeight; } } void nsHTMLReflowState::AdjustComputedHeight(PRBool aAdjustForBoxSizing) { // only do the math if the height is not a symbolic value if (mComputedHeight == NS_UNCONSTRAINEDSIZE) { return; } NS_ASSERTION(mComputedHeight >= 0, "Negative Height Input - very bad"); // Factor in any minimum and maximum size information if (mComputedHeight > mComputedMaxHeight) { mComputedHeight = mComputedMaxHeight; } else if (mComputedHeight < mComputedMinHeight) { mComputedHeight = mComputedMinHeight; } if (aAdjustForBoxSizing) { // remove extra padding/border if box-sizing property is set switch (mStylePosition->mBoxSizing) { case NS_STYLE_BOX_SIZING_PADDING : { mComputedHeight -= mComputedPadding.top + mComputedPadding.bottom; break; } case NS_STYLE_BOX_SIZING_BORDER : { mComputedHeight -= mComputedBorderPadding.top + mComputedBorderPadding.bottom; } default : break; } // If it did go bozo because of too much border or padding, set to 0 if(mComputedHeight < 0) mComputedHeight = 0; } } void nsHTMLReflowState::AdjustComputedWidth(PRBool aAdjustForBoxSizing) { // only do the math if the width is not a symbolic value if (mComputedWidth == NS_UNCONSTRAINEDSIZE) { return; } NS_ASSERTION(mComputedWidth >= 0, "Negative Width Input - very bad"); // Factor in any minimum and maximum size information if (mComputedWidth > mComputedMaxWidth) { mComputedWidth = mComputedMaxWidth; } else if (mComputedWidth < mComputedMinWidth) { mComputedWidth = mComputedMinWidth; } if (aAdjustForBoxSizing) { // remove extra padding/border if box-sizing property is set switch (mStylePosition->mBoxSizing) { case NS_STYLE_BOX_SIZING_PADDING : { mComputedWidth -= mComputedPadding.left + mComputedPadding.right; break; } case NS_STYLE_BOX_SIZING_BORDER : { mComputedWidth -= mComputedBorderPadding.left + mComputedBorderPadding.right; } default : break; } // If it did go bozo because of too much border or padding, set to 0 if(mComputedWidth < 0) mComputedWidth = 0; } } #ifdef IBMBIDI PRBool nsHTMLReflowState::IsBidiFormControl(nsPresContext* aPresContext) { // This check is only necessary on visual bidi pages, because most // visual pages use logical order for form controls so that they will // display correctly on native widgets in OSs with Bidi support. // So bail out if the page is not Bidi, or not visual, or if the pref is // set to use visual order on forms in visual pages if (!aPresContext->BidiEnabled()) { return PR_FALSE; } if (!aPresContext->IsVisualMode()) { return PR_FALSE; } PRUint32 options = aPresContext->GetBidi(); if (IBMBIDI_CONTROLSTEXTMODE_LOGICAL != GET_BIDI_OPTION_CONTROLSTEXTMODE(options)) { return PR_FALSE; } nsIContent* content = frame->GetContent(); if (!content) { return PR_FALSE; } // If this is a root reflow, we have to walk up the content tree to // find out if the reflow root is a descendant of a form control. // Otherwise, just test this content node if (mReflowDepth == 0) { for ( ; content; content = content->GetParent()) { if (content->IsContentOfType(nsIContent::eHTML_FORM_CONTROL)) { return PR_TRUE; } } } else { return (content->IsContentOfType(nsIContent::eHTML_FORM_CONTROL)); } return PR_FALSE; } #endif