/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- * * The contents of this file are subject to the Netscape Public License * Version 1.0 (the "NPL"); you may not use this file except in * compliance with the NPL. You may obtain a copy of the NPL at * http://www.mozilla.org/NPL/ * * Software distributed under the NPL is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL * for the specific language governing rights and limitations under the * NPL. * * The Initial Developer of this code under the NPL is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998 Netscape Communications Corporation. All Rights * Reserved. */ #ifndef _edt_h_ #define _edt_h_ #ifdef EDITOR #ifndef _XP_Core_ #include "xp_core.h" #endif #ifndef _edttypes_h_ #include "edttypes.h" #endif XP_BEGIN_PROTOS struct java_lang_Object; /***************************************************************************** * Layout Interface *****************************************************************************/ /* * Create an edit buffer, ready to be pared into. */ ED_Buffer* EDT_MakeEditBuffer(MWContext *pContext); /* * Destroy an edit buffer. */ void EDT_DestroyEditBuffer(MWContext * pContext); /* CLM: * Front end can call this to prevent doing * bad stuff when we failed to load URL * and don't have a buffer */ XP_Bool EDT_HaveEditBuffer(MWContext * pContext); /* * Call this to get a special string to feed the editor when you're * creating an empty document. * Returns an alias to a special empty document string. * (You don't own the storage, so don't free it.) */ char* EDT_GetEmptyDocumentString(void); /* * Parse a tag into an edit buffer. */ ED_Element* EDT_ParseTag(ED_Buffer* pEditBuffer, PA_Tag* pTag); /* * Called instead of LO_ProcessTag. This routine allows the Edit enginge to * build up an HTML tree. Inputs and outputs are the same as LO_ProcessTag. */ intn EDT_ProcessTag(void *data_object, PA_Tag *tag, intn status); /* * Tells the edit engine to position the insert point. */ void EDT_SetInsertPoint( ED_Buffer *pBuffer, ED_Element* pElement, int iPosition, XP_Bool bStickyAfter ); /* * Assocates the layout element with a given edit element. Called from by the * layout engine onces a layout element has been has been created. */ void EDT_SetLayoutElement( ED_Element* pElement, intn iEditOffset, intn lo_type, LO_Element *pLayoutElement ); /* Breaks the association between a layout element and a given edit element. * Called by the layout engine when a layout element is being destroyed. */ void EDT_ResetLayoutElement( ED_Element* pElement, intn iEditOffset, LO_Element* pLayoutElement); /* * Delete all tags in the chain beginning with pTag. */ void EDT_DeleteTagChain( PA_Tag* pTag ); /* * Retrieve the next tag element from the editor. Returns NULL when there are * no more tags. */ PA_Tag* EDT_TagCursorGetNext( ED_TagCursor* pCursor ); /* * enclosing html for a given point in the document */ PA_Tag* EDT_TagCursorGetNextState( ED_TagCursor* pCursor ); /* * returns true if at the beginning of a paragraph or break. */ XP_Bool EDT_TagCursorAtBreak( ED_TagCursor *pCursor, XP_Bool* pEndTag ); /* * Get the current line number for the cursor */ int32 EDT_TagCursorCurrentLine( ED_TagCursor* pCursor ); /* * Get the current line number for the cursor */ XP_Bool EDT_TagCursorClearRelayoutState( ED_TagCursor* pCursor ); /* * Clone a cursor. Used to save position state. */ ED_TagCursor* EDT_TagCursorClone( ED_TagCursor *pCursor ); /* * Delete a cloned (or otherwise) cursor */ void EDT_TagCursorDelete( ED_TagCursor* pCursor ); /* * called when LO finishes (only the first time) */ void EDT_FinishedLayout( MWContext *pContext ); /* * Call back from image library giving the height and width of an image. */ void EDT_SetImageInfo(MWContext *context, int32 ele_id, int32 width, int32 height); /* * Test to see if the editor is currently loading a file. */ XP_Bool EDT_IsBlocked( MWContext *pContext ); /***************************************************************************** * FE Interface *****************************************************************************/ void EDT_SaveToBuffer ( MWContext * pContext, XP_HUGE_CHAR_PTR* pBuffer ); void EDT_ReadFromBuffer ( MWContext * pContext, XP_HUGE_CHAR_PTR pBuffer ); /* * Returns ED_ERROR_NONE if files saved OK, else returns error code. */ ED_FileError EDT_SaveFile( MWContext * pContext, char * pSourceURL, char * pDestURL, XP_Bool bSaveAs, XP_Bool bKeepImagesWithDoc, XP_Bool bAutoAdjustLinks ); /* * Returns ED_ERROR_NONE if files saved OK, else returns error code. */ ED_FileError EDT_PublishFile( MWContext * pContext, ED_SaveFinishedOption finishedOpt, char * pSourceURL, char **pIncludedFiles, /* list of files to publish */ char * pDestURL, /* Should be http:// or ftp:// */ XP_Bool bKeepImagesWithDoc, XP_Bool bAutoAdjustLinks, XP_Bool bSavePassword); /* Tied to user checkbox in dialog */ /* * Check the URL that will be passed into EDT_PublishFile. * TRUE if pURL should be used, or FALSE if the user should * make another choice. */ XP_Bool EDT_CheckPublishURL( MWContext * pContext, char * pURL); /* * Save editor and images to an abstract file system. * Used by libmsg to write MHTML mail messages. */ ED_FileError EDT_SaveFileTo( MWContext * pContext, ED_SaveFinishedOption finishedOpt, char * pSourceURL, void *tapeFS, /* Really a (ITapeFileSystem *) */ XP_Bool bKeepImagesWithDoc, XP_Bool bAutoAdjustLinks ); /* * Create a temporary file with the contents of the edit buffer, images and links * will be adjusted to work from the new location. Call doneFn with the file:// URL * of the temp file or NULL if failure. doneFn may be called before EDT_SaveToTempFile * returns. Use EDT_RemoveTempFile when file is no longer needed. */ typedef void (*EDT_SaveToTempCallbackFn)(char *pFileURL,void *hook); void EDT_SaveToTempFile(MWContext *pContext,EDT_SaveToTempCallbackFn doneFn, void *hook); void EDT_RemoveTempFile(MWContext *pContext,char *pFileURL); #if defined(MOZ_MAIL_COMPOSE) || defined(MOZ_MAIL_NEWS) /* * Like MSG_MailDocument, but will deal properly with dirty or unsaved documents. * I.e. May save document to a temp file before attaching it to the new mail * message. */ void EDT_MailDocument(MWContext *pContext); #endif /* * Returns the temporary directory (in xpURL format) for all files associated with this document. * Contents of this directory will be deleted when this edit buffer is destroyed. */ char *EDT_GetDocTempDir(MWContext *pContext); /* * Return a unique filename (in xpURL format) for a potential file in the documents temp directory. Does not actually * create the file. * If prefix is non-NULL, it will give the first few characters of the temp filename. * Only the first three characters of prefix will be used. * If extension is non-NULL, it will be the file extension, keep it <= 3 characters for windows, * default is "TMP". */ char *EDT_CreateDocTempFilename(MWContext *pContext,char *prefix,char *extension); /* * cancel a load in progress */ void EDT_SaveCancel( MWContext *pContext ); /* * Enable and disable autosave. A value of zero disables autosave. * AutoSave doesn't start until the document has a file. */ void EDT_SetAutoSavePeriod(MWContext *pContext, int32 minutes); int32 EDT_GetAutoSavePeriod(MWContext *pContext); void EDT_DisplaySource( MWContext *pContext ); /* * Edit Navagation prototypes */ void EDT_PreviousChar( MWContext *context, XP_Bool bSelect ); void EDT_NextChar( MWContext *context, XP_Bool bSelect ); void EDT_BeginOfLine( MWContext *context, XP_Bool bSelect ); void EDT_EndOfLine( MWContext *context, XP_Bool bSelect ); void EDT_BeginOfDocument( MWContext *context, XP_Bool bSelect ); void EDT_EndOfDocument( MWContext *context, XP_Bool bSelect ); void EDT_Up( MWContext *context, XP_Bool bSelect ); void EDT_Down( MWContext *context, XP_Bool bSelect ); void EDT_PageUp( MWContext *context, XP_Bool bSelect ); void EDT_PageDown( MWContext *context, XP_Bool bSelect ); void EDT_PreviousWord( MWContext *context, XP_Bool bSelect ); void EDT_NextWord( MWContext *context, XP_Bool bSelect ); void EDT_NextTableCell( MWContext *context, XP_Bool bSelect ); void EDT_PreviousTableCell( MWContext *context, XP_Bool bSelect ); void EDT_WindowScrolled( MWContext *context ); /* * Edit functional stuff... */ EDT_ClipboardResult EDT_DeletePreviousChar( MWContext *context ); EDT_ClipboardResult EDT_DeleteChar( MWContext *context ); void EDT_PositionCaret( MWContext *context, int32 x, int32 y ); /* Delete current selection and move caret to the insert point * closest to supplied doc coordinates. * Use when moving dragged data within the same window. */ void EDT_DeleteSelectionAndPositionCaret( MWContext *pContext, int32 x, int32 y ); /* Converts ("snaps") input X, Y (doc coordinates) to X, Y needed for drop caret * and calls appropriate front-end FE_DisplayCaret to use show where * a drop would occur. It does NOT change current selection or internal caret position * Also handles dragging table/cells and will return FALSE if mouse is * not over a good drop location within a target table * (Always returns TRUE if not dragging table or cells since * cursor is always snapped to a valid position) * Call during mouse moving over a window where drop can occur */ XP_Bool EDT_PositionDropCaret( MWContext *pContext, int32 x, int32 y ); /* Call to initialize global static data used for pasting table cells into existing table * Returns TRUE if we are dragging table or table cells */ XP_Bool EDT_StartDragTable( MWContext *pContext, int32 x, int32 y ); /* Clear the XP data for dragging tables and cells */ void EDT_StopDragTable( MWContext *pContext ); XP_Bool EDT_IsDraggingTable( MWContext *pContext ); void EDT_DoubleClick( MWContext *context, int32 x, int32 y ); void EDT_SelectObject( MWContext *context, int32 x, int32 y); EDT_ClipboardResult EDT_ReturnKey( MWContext *context ); /* Do what the TAB key should do * Moves from cell to cell in Tables (in direction given by bForward) * unless 3rd param is TRUE, which forces regular tab insert in table text */ EDT_ClipboardResult EDT_TabKey( MWContext *context, XP_Bool bForward, XP_Bool bForceTabChar ); void EDT_Indent( MWContext *context ); void EDT_Outdent( MWContext *context ); void EDT_RemoveList( MWContext *context ); void EDT_Reload( MWContext *pContext ); /* * Kludge, supports only the windows front end now. */ EDT_ClipboardResult EDT_KeyDown( MWContext *context, uint16 nChar, uint16 b, uint16 c ); /* * Insert a nonbreaking space character. Usually wired to shift spacebar */ EDT_ClipboardResult EDT_InsertNonbreakingSpace( MWContext *context ); /* * Undo/Redo. Usage: * To tell if there's a command to undo: * if ( EDT_GetUndoCommandID(context, 0 ) != CEDITCOMMAND_ID_NULL ) * * To undo the most recent command: * EDT_Undo( context ); * * (Similarly for redo.) * * Use the CommandID to look up a string for saying "Undo ..." * on the menu. */ #define CEDITCOMMAND_ID_NULL 0 #define CEDITCOMMAND_ID_GENERICCOMMAND 1 void EDT_Undo( MWContext *pContext ); void EDT_Redo( MWContext *pContext ); intn EDT_GetUndoCommandID( MWContext *pContext, intn index ); intn EDT_GetRedoCommandID( MWContext *pContext, intn index ); /* Lets the front end specify the command history limit. This is used to limit the total of commands on * both the undo and the redo lists. */ intn EDT_GetCommandHistoryLimit(void); void EDT_SetCommandHistoryLimit(intn limit); /* Must be greater than or equal to zero. Ignored if less than zero. */ /* Call from dialogs to batch changes for undo. To use, call EDT_BeginBatchChanges, * make the changes you want, and then call EDT_EndBatchChanges. It's OK to * not make any changes -- in that case the undo history won't be affected. */ void EDT_BeginBatchChanges(MWContext *pContext); void EDT_EndBatchChanges(MWContext *pContext); /* * Used to control display of paragraph marks. */ void EDT_SetDisplayParagraphMarks(MWContext *pContext, XP_Bool display); XP_Bool EDT_GetDisplayParagraphMarks(MWContext *pContext); /* * Used to control display of tables in either wysiwyg or flat mode. */ void EDT_SetDisplayTables(MWContext *pContext, XP_Bool display); XP_Bool EDT_GetDisplayTables(MWContext *pContext); /* * need to figure out how to handle tags and parameters. */ void EDT_MorphContainer( MWContext *pContext, TagType t ); TagType EDT_GetParagraphFormatting( MWContext *pContext ); ED_Alignment EDT_GetParagraphAlign( MWContext *pContext); void EDT_SetParagraphAlign( MWContext* pContext, ED_Alignment eAlign ); /* Set Table alignment if caret is inside table or table is selected * EDT_SetParagraphAlign will also to table if it is selected, * so use this to force table alignment even if its not selected */ void EDT_SetTableAlign( MWContext* pContext, ED_Alignment eAlign ); /* * Find out what's under the cursor */ ED_ElementType EDT_GetCurrentElementType( MWContext *pContext ); /* * Character Formatting (DEPRECIATED) * Routines should only be called when EDT_GetCurrentElementType() returns * ED_ELEMENT_TEXT. */ ED_TextFormat EDT_GetCharacterFormatting( MWContext *pContext ); void EDT_FormatCharacter( MWContext *pContext, ED_TextFormat p); /* Next 4 use the older "relative" scale of 1 to 7 */ /* Decrease or increase by 1 unit * Goes through selection to keep relative size differences */ void EDT_DecreaseFontSize( MWContext *pContext ); void EDT_IncreaseFontSize( MWContext *pContext ); int EDT_GetFontSize( MWContext *pContext ); void EDT_SetFontSize( MWContext *pContext, int iSize ); /* These use the new absolute point size*/ void EDT_SetFontPointSize( MWContext *pContext, int iPoints ); int EDT_GetFontPointSize( MWContext *pContext ); /* List of Font faces - concatenated strings ending in '\0\0' * Note: First 2 strings are for Default Proportional and Default Fixed width, * the rest are the "NS Fonts" used to set the FONT FACE tag * Use these to construct a list of fonts for the user * We cache 1 static list of faces (implemented in EDTUTIL.CPP) */ char *EDT_GetFontFaces(void); /* Similar to above, but gets a list of the Tag strings * (what is written in FONT FACE tag that corresponds to a NS Font face name) */ char *EDT_GetFontFaceTags(void); /* Set the Font Face - encapsulates complexity of EDT_CharacterData mangling * If pCharacterData is suppled, then it is used to set fontface data * (Note: pCharacterData is not freed). * If pCharacterData is NULL, then data is obtained from current selection or at caret * If pMWContext is supplied, then EDT_SetCharacterData() will be called * with either the supplied struct or the internally-obtained data * * Supply either iFontIndex or pFontFace: * iFontIndex is index within the font list returned by EDT_GetFontFaces(), * (we will lookup the appropriate string to use for Font Face Tag) * If pFontFace is supplied, use it exactly as is (iFontIndex is ignored) */ void EDT_SetFontFace(MWContext * pMWContext, EDT_CharacterData * pCharacterData, int iFontIndex, char * pFontFace ); /* Get the index into the FontFace list for the current caret location or selection * Returns 0 (ED_FONT_VARIABLE), 1 (ED_FONT_FIXED), or 2 (ED_FONT_LOCAL) */ int EDT_GetFontFaceIndex(MWContext *pContext); /* Get the current font face for current selection or insert point * If the current font matches an XP font 'group', * this is the platform-specific font matching the group, * else it is the font face string from EDT_CharacterData or * the appropriate XP string for the Variable and Fixed Width states. * Use this to search your local font list in menu or listbox. * An empty string is returned when selection is mixed (> 1 face in selection) * DO NOT FREE RETURN VALUE (it is a static string), but use it quickly, * because it will change as caret moves throught text */ char * EDT_GetFontFace(MWContext *pContext); /* Find the pFontFace within each set of comma-delimeted FontFace groups * Return pointer to entire group if pFontFace matches any single font in the group * If not found, return pFontFace, thus the * result can be passed directly as the last param of EDT_SetFontFace() * Comparing pFontFace to result pointer can be used as test that XP font was found * DO NOT free the resulting string pointer */ char * EDT_TranslateToXPFontFace( char * pFontFace ); XP_Bool EDT_GetFontColor( MWContext *pContext, LO_Color *pDestColor ); void EDT_SetFontColor( MWContext *pContext, LO_Color *pColor); /* Get the current Cell, Table, or Page background based on caret location * Returns the element type of the background we obtained, one of: * ED_ELEMENT_NONE if error, * ED_ELEMENT_TEXT (for page background) * ED_ELEMENT_TABLE or ED_ELEMENT_CELL for table and cell */ ED_ElementType EDT_GetBackgroundColor( MWContext *pContext, LO_Color *pColor ); /* Set the selected cell or table's background, or current cell (contains caret) or the page background (caret is not in a table) */ void EDT_SetBackgroundColor( MWContext *pContext, LO_Color *pColor ); /* Parse a font colors string in the format: "r,g,b,ColorName" where colors for r,g,b * are decimal strings in range 0-255 * Returns pointer (within supplied string) to the Color Name * and converts color strings into integers in supplied the LO_Color struct */ char * EDT_ParseColorString(LO_Color * pLoColor, char * pColorString); /* Get the Netscape solid color. This replaces EDT_GetFontColorFromList */ void EDT_GetNSColor(intn iIndex, LO_Color * pLoColor); /* Scan our list of colors and return index of matching color * or -1 if no match found. We NEVER return 0 (default color) */ int EDT_GetMatchingFontColorIndex(LO_Color * pLOColor); /* * Get and set character formatting. */ /* * EDT_GetCharacterData * returns the current character formatting for the current selection * or insert point. Should only be called when GetCurrentElementType is * ED_ELEMENT_TEXT or ED_ELEMENT_SELECTION. * * returns and EDT_CharacterData structure. Caller is responsible for * destroying the structure by calling EDT_FreeCharacterData(). * * CharacterData contain on return * pRet->mask // the that were deterministic (all in insertpoint case * // and those that were consistant across the selection * pRet->values // if in the mask, 0 means clear across the selection * // 1 means set across the selection */ EDT_CharacterData* EDT_GetCharacterData( MWContext *pContext ); /* * EDT_SetCharacterData * sets the character charistics for the current insert point. * * the mask contains the bits to set * values contains the values to set them to * * for example if you wanted to just change the font size to 10 and leave * the rest alone: * * pData = EDT_NewCharacterData(); * pData->mask = TF_FONT_SIZE * pData->value = TF_FONT_SIZE * pData->iSize = 5; * EDT_SetCharacterData( context ,pData ); * EDT_FreeCharacterData(pData); * */ void EDT_SetCharacterData( MWContext *pContext, EDT_CharacterData *pData ); EDT_CharacterData* EDT_NewCharacterData(void); void EDT_FreeCharacterData( EDT_CharacterData *pData ); /* * Set character data for a given offset in the buffer. */ void EDT_SetCharacterDataAtOffset( MWContext *pContext, EDT_CharacterData *pData, ED_BufferOffset iBufOffset, int32 iLen ); /* * Returns colors of all the different fonts. * Must call XP_FREE( pDest ) after use. */ int EDT_GetExtraColors( MWContext *pContext, LO_Color **pDest ); /* * Selection */ void EDT_StartSelection(MWContext *context, int32 x, int32 y); void EDT_ExtendSelection(MWContext *context, int32 x, int32 y); void EDT_EndSelection(MWContext *context, int32 x, int32 y); /* cm */ void EDT_ClearSelection(MWContext *context); void EDT_SelectAll(MWContext *context); void EDT_SelectTable(MWContext *context); void EDT_SelectTableCell(MWContext *context); XP_Block EDT_GetSelectionText(MWContext *context); XP_Bool EDT_IsSelected( MWContext *pContext ); XP_Bool EDT_SelectionContainsLink( MWContext *pContext ); /* Format all text contents into tab-delimited cells, ** with CR at end of each row. ** Use result to paste into Excell spreadsheets */ char *EDT_GetTabDelimitedTextFromSelectedCells( MWContext *pContext ); /* Test if there's a selection, and the beginning and end are not * split across a cell boundary */ XP_Bool EDT_CanConvertTextToTable(MWContext *pMWContext); /* Convert Selected text into a table (put each paragraph in separate cell) * Number of rows is automatic - creates as many as needed */ void EDT_ConvertTextToTable(MWContext *pMWContext, intn iColumns); /* Convert the table into text - unravel existing paragraphs in cells */ void EDT_ConvertTableToText(MWContext *pMWContext); /* Save the character and paragraph style of selection or at caret */ void EDT_CopyStyle(MWContext *pMWContext); /* This is TRUE after EDT_CopyStyle is called, until the next left mouse up call * or user cancels with ESC key, or ??? (any suggestions?) */ XP_Bool EDT_CanPasteStyle(MWContext *pMWContext); /* Apply the style to selection or at caret. Use bApplyStyle = FALSE to cancel */ void EDT_PasteStyle(MWContext *pMWContext, XP_Bool bApplyStyle); XP_Bool EDT_DirtyFlag( MWContext *pContext ); void EDT_SetDirtyFlag( MWContext *pContext, XP_Bool bValue ); /* * Clipboard stuff */ #define EDT_COP_OK 0 #define EDT_COP_DOCUMENT_BUSY 1 #define EDT_COP_SELECTION_EMPTY 2 #define EDT_COP_SELECTION_CROSSES_TABLE_DATA_CELL 3 EDT_ClipboardResult EDT_InsertText( MWContext *pContext, char *pText ); EDT_ClipboardResult EDT_PasteText( MWContext *pContext, char *pText ); EDT_ClipboardResult EDT_PasteHTML( MWContext *pContext, char *pHtml ); /** API for pasting quoted text into the editor. * Call EDT_PasteQuoteBegin, then call EDT_PasteQuoteINTL zero or more times, * then call EDT_PasteQuoteEnd. * If EDT_PasteQuoteBegin returns EDT_COP_OK then you must eventually call EDT_PasteQuoteEnd. * If EDT_PasteQuoteBegin returns an error condition, then you must not call EDT_PasteQuoteEnd. * * The "quote" is something of a misnomer. The text isn't quoted. If you want it to be * quoted, then you have to quote it yourself, before calling EDT_PasteQuoteINTL. */ EDT_ClipboardResult EDT_PasteQuoteBegin( MWContext *pContext, XP_Bool isHTML ); /* Pass in the csid of the pasted text. The editor will transcode * the pasted text to the document's wincsid if nescessary. */ EDT_ClipboardResult EDT_PasteQuoteINTL( MWContext *pContext, char *pText, int16 csid ); /* The non-INTL version is only around for backwards compatability. */ EDT_ClipboardResult EDT_PasteQuote( MWContext *pContext, char *pText ); EDT_ClipboardResult EDT_PasteQuoteEnd(MWContext *pContext); /* * Can paste a singe or multiple HREFs. Pointer to array of HREF pointers and * title pointers. * Title pointers can be NULL */ EDT_ClipboardResult EDT_PasteHREF( MWContext *pContext, char **ppHref, char **ppTitle, int iCount); /* Depreciated */ void EDT_DropHREF( MWContext *pContext, char *pHref, char* pTitle, int32 x, int32 y ); /* Depreciated */ XP_Bool EDT_CanDropHREF( MWContext *pContext, int32 x, int32 y ); /* * The text buffer should also be huge, it isn't */ EDT_ClipboardResult EDT_CopySelection( MWContext *pContext, char** ppText, int32* pTextLen, XP_HUGE_CHAR_PTR* ppHtml, int32* pHtmlLen); EDT_ClipboardResult EDT_CutSelection( MWContext *pContext, char** ppText, int32* pTextLen, XP_HUGE_CHAR_PTR* ppHtml, int32* pHtmlLen); /* * Use to enable or disable the UI for cut/copy/paste. * If bStrictChecking is true, will check for all conditions, * Otherwise, will just check if the selection is empty. */ EDT_ClipboardResult EDT_CanCut(MWContext *pContext, XP_Bool bStrictChecking); EDT_ClipboardResult EDT_CanCopy(MWContext *pContext, XP_Bool bStrictChecking); EDT_ClipboardResult EDT_CanPaste(MWContext *pContext, XP_Bool bStrictChecking); /* * returns true if we can set an HREF */ XP_Bool EDT_CanSetHREF( MWContext *pContext ); /* * Get the current link under the cursor or inside the current selection. */ char *EDT_GetHREF( MWContext *pContext ); /* * Get the anchor text of the current link under the cursor */ char *EDT_GetHREFText( MWContext *pContext ); /* * Use HREF structure */ EDT_HREFData *EDT_GetHREFData( MWContext *pContext ); void EDT_SetHREFData( MWContext *pContext, EDT_HREFData *pData ); EDT_HREFData *EDT_NewHREFData( void ); EDT_HREFData *EDT_DupHREFData( EDT_HREFData *pData ); void EDT_FreeHREFData( EDT_HREFData *pData ); /* * This routine can only be called when 'EDT_CanSetHREF()' */ void EDT_SetHREF(MWContext *pContext, char *pHREF ); /* * Refresh the entire document. */ void EDT_RefreshLayout( MWContext *pContext ); /* * Getting and setting properties of images. After Getting an image's properties * the EDT_ImageData must be freed with EDT_FreeImageData(). Routines should * only be called when EDT_GetCurrentElementType() returns ED_ELEMENT_IMAGE. */ EDT_ImageData *EDT_GetImageData( MWContext *pContext ); void EDT_SetImageData( MWContext *pContext, EDT_ImageData *pData, XP_Bool bKeepImagesWithDoc ); EDT_ImageData *EDT_NewImageData(void); void EDT_FreeImageData( EDT_ImageData *pData ); void EDT_InsertImage( MWContext *pContext, EDT_ImageData *pData, XP_Bool bKeepImageWithdoc ); /* Value to display if EDT_ImageData::iBorder == -1. Different depending on whether the image has a link or not. */ int32 EDT_GetDefaultBorderWidth( MWContext *pContext ); EDT_HorizRuleData *EDT_GetHorizRuleData( MWContext *pContext ); void EDT_SetHorizRuleData( MWContext *pContext, EDT_HorizRuleData *pData ); EDT_HorizRuleData *EDT_NewHorizRuleData( void ); void EDT_FreeHorizRuleData( EDT_HorizRuleData *pData ); void EDT_InsertHorizRule( MWContext *pContext, EDT_HorizRuleData *pData ); void EDT_ToggleList( MWContext *pContext, intn iTagType); /* All-in-one-call to create numbered or unnumbered lists. */ XP_Bool EDT_GetToggleListState( MWContext *pContext, intn iTagType); EDT_ListData *EDT_GetListData( MWContext *pContext ); void EDT_SetListData( MWContext *pContext, EDT_ListData *pData ); void EDT_FreeListData( EDT_ListData *pData ); void EDT_InsertBreak( MWContext *pContext, ED_BreakType eBreak ); XP_Bool EDT_IsInsertPointInTable(MWContext *pContext ); XP_Bool EDT_IsInsertPointInNestedTable(MWContext *pContext ); EDT_TableData* EDT_GetTableData( MWContext *pContext ); /* If bCellParent = TRUE: * Get width and height table enclosing current cell, * (minus border and cell spacing) * If bCell = FALSE: * Get the width/height of current page or * size the parent cell if insert point is in a nested table, */ void EDT_GetTableParentSize( MWContext *pContext, XP_Bool bCell, int32 *pWidth, int32 *pHeight ); void EDT_SetTableData( MWContext *pContext, EDT_TableData *pData ); EDT_TableData* EDT_NewTableData( void ); void EDT_FreeTableData( EDT_TableData *pData ); void EDT_InsertTable( MWContext *pContext, EDT_TableData *pData); void EDT_DeleteTable( MWContext *pContext); XP_Bool EDT_IsInsertPointInTableCaption(MWContext *pContext ); EDT_TableCaptionData* EDT_GetTableCaptionData( MWContext *pContext ); void EDT_SetTableCaptionData( MWContext *pContext, EDT_TableCaptionData *pData ); EDT_TableCaptionData* EDT_NewTableCaptionData( void ); void EDT_FreeTableCaptionData( EDT_TableCaptionData *pData ); void EDT_InsertTableCaption( MWContext *pContext, EDT_TableCaptionData *pData); void EDT_DeleteTableCaption( MWContext *pContext); XP_Bool EDT_IsInsertPointInTableRow(MWContext *pContext ); EDT_TableRowData* EDT_GetTableRowData( MWContext *pContext ); void EDT_SetTableRowData( MWContext *pContext, EDT_TableRowData *pData ); EDT_TableRowData* EDT_NewTableRowData(void); void EDT_FreeTableRowData( EDT_TableRowData *pData ); void EDT_InsertTableRows( MWContext *pContext, EDT_TableRowData *pData, XP_Bool bAfterCurrentRow, intn number); void EDT_DeleteTableRows( MWContext *pContext, intn number); XP_Bool EDT_IsInsertPointInTableCell(MWContext *pContext ); EDT_TableCellData* EDT_GetTableCellData( MWContext *pContext ); /* Change the table selection and/or move to previous/next cell, row, or column * depending on iMoveType. * To just change the selection, set the iHitType to new type * (ED_HIT_SEL_ROW, ED_HIT_SEL_COL, or ED_HIT_SEL_CELL) and set iMoveType to ED_MOVE_NONE * To change to another row, col, or cell, set iHitType to same as that in pData or ED_HIT_NONE, * and set iMoveType to ED_MOVE_PREV or ED_MOVE_NEXT * If pData is not NULL, it is filled with data for the selected cells * This will wrap around appropriately when end of selection or table is reached */ void EDT_ChangeTableSelection(MWContext *pContext, ED_HitType iHitType, ED_MoveSelType iMoveType, EDT_TableCellData *pData); void EDT_SetTableCellData( MWContext *pContext, EDT_TableCellData *pData ); EDT_TableCellData* EDT_NewTableCellData( void ); void EDT_FreeTableCellData( EDT_TableCellData *pData ); void EDT_InsertTableCells( MWContext *pContext, EDT_TableCellData *pData, XP_Bool bAfterCurrentCell, intn number); void EDT_DeleteTableCells( MWContext *pContext, intn number); void EDT_InsertTableColumns( MWContext *pContext, EDT_TableCellData *pData, XP_Bool bAfterCurrentCell, intn number); void EDT_DeleteTableColumns( MWContext *pContext, intn number); XP_Bool EDT_IsInsertPointInLayer(MWContext *pContext ); EDT_LayerData* EDT_GetLayerData( MWContext *pContext ); void EDT_SetLayerData( MWContext *pContext, EDT_LayerData *pData ); EDT_LayerData* EDT_NewLayerData(void); void EDT_FreeLayerData( EDT_LayerData *pData ); void EDT_InsertLayer( MWContext *pContext, EDT_LayerData *pData); void EDT_DeleteLayer( MWContext *pContext); EDT_PageData *EDT_GetPageData( MWContext *pContext ); EDT_PageData *EDT_NewPageData(void); void EDT_SetPageData( MWContext *pContext, EDT_PageData *pData ); void EDT_FreePageData( EDT_PageData *pData ); /* Use to enable/disable Merge Cells feature. * Selected cells can be merged only if in a continuous set * within the same row or column. * A single cell can be merged with cell to the right * Returns 0 if neither conditions holds */ ED_MergeType EDT_GetMergeTableCellsType( MWContext *pContext ); /* Use to enable/disable Split Cell feature. * Current cell (containing caret) can be split * only if it has COLSPAN or ROWSPAN */ XP_Bool EDT_CanSplitTableCell( MWContext *pContext ); /* Set appropriate COLSPAN or ROWSPAN and move all * cell contents into first cell of set */ void EDT_MergeTableCells( MWContext *pContext ); /* Separate paragraphs into sepaparate cells, * removing COLSPAN or ROWSPAN */ void EDT_SplitTableCell( MWContext *pContext ); /* Take a single, selected image and turn it into the * background image of page, deleting it from the page */ void EDT_SetImageAsBackground( MWContext *pContext ); /* Get and Set MetaData. * Get the count of meta data objects. * enumerate through them (0 based). * If the name changes, a new meta data is created or may overwrite a different * name value pair. */ intn EDT_MetaDataCount( MWContext *pContext ); EDT_MetaData* EDT_GetMetaData( MWContext *pContext, intn n ); EDT_MetaData* EDT_NewMetaData( void ); void EDT_SetMetaData( MWContext *pContext, EDT_MetaData *pMetaData ); void EDT_DeleteMetaData( MWContext *pContext, EDT_MetaData *pMetaData ); void EDT_FreeMetaData( EDT_MetaData *pMetaData ); /******************************************************* * CLM: JAVA, PLUG-IN interface */ EDT_JavaData *EDT_GetJavaData( MWContext *pContext ); EDT_JavaData *EDT_NewJavaData(void); void EDT_SetJavaData( MWContext *pContext, EDT_JavaData *pData ); void EDT_FreeJavaData( EDT_JavaData *pData ); EDT_PlugInData *EDT_GetPlugInData( MWContext *pContext ); EDT_PlugInData *EDT_NewPlugInData(void); void EDT_SetPlugInData( MWContext *pContext, EDT_PlugInData *pData ); void EDT_FreePlugInData( EDT_PlugInData *pData ); /* Parameters: NAME=VALUE pairs used by both Java and PlugIns */ EDT_ParamData* EDT_GetParamData( MWContext *pContext, intn n ); EDT_ParamData* EDT_NewParamData(void); void EDT_SetParamData( MWContext *pContext, EDT_ParamData *pParamData ); void EDT_DeleteParamData( MWContext *pContext, EDT_ParamData *pParamData ); void EDT_FreeParamData( EDT_ParamData *pParamData ); /* * Get and Set Named Anchors (Targets) */ char *EDT_GetTargetData( MWContext *pContext ); void EDT_SetTargetData( MWContext *pContext, char *pTargetName ); void EDT_InsertTarget( MWContext *pContext, char* pTargetName ); char *EDT_GetAllDocumentTargets( MWContext *pContext ); /*CLM: Check current file-update time and * return TRUE if it is different * Save the newly-found time in edit buffer class */ XP_Bool EDT_IsFileModified( MWContext* pContext ); /* CLM: Read a file and build a targets list just like the current doc list */ char *EDT_GetAllDocumentTargetsInFile( MWContext *pContext, char *pHref); /* * Returns a list of all local documents associated with * the current buffer. */ char* EDT_GetAllDocumentFiles( MWContext *pContext ); /* * Also sets ppSelected to be a list of whether each local document should be * saved/published/sent by default. Must pass in the preference for whether images * are sent along with the document. */ char* EDT_GetAllDocumentFilesSelected( MWContext *pContext, XP_Bool **ppSelected, XP_Bool bKeepImagesWithDoc ); /* * Get and Set UnknownTags */ char *EDT_GetUnknownTagData( MWContext *pContext ); void EDT_SetUnknownTagData( MWContext *pContext, char *pUnknownTagData ); void EDT_InsertUnknownTag( MWContext *pContext, char* pUnknownTagData ); /* CLM: Validate: check for matching quotes, "<" and ">" if bNoBrackets is FALSE * Skip (and strip out) <> if bNoBrackets is TRUE, * used for Attributes-only, such as MOCHA string in HREF */ ED_TagValidateResult EDT_ValidateTag( char *pData, XP_Bool bNoBrackets ); /* * Called by the front end when the user presses the cancel button on the * Modal dialog */ void EDT_ImageLoadCancel( MWContext *pContext ); /***************************************************************************** * Property Dialogs *****************************************************************************/ #if 0 /* * String allocation functions for parameters passed to EDT_Property functions */ char *EDT_StringDup(char *pDupString); void EDT_StringFree(char* pString); void EDT_GetPageProperties( ED_PageProperties *pProps ); void EDT_SetPageProperties( ED_PageProperties *pProps ); void EDT_GetParagraphProperties( ED_ParagraphProperties *pProps ); void EDT_SetParagraphProperties( ED_ParagraphProperties *pProps ); #endif /***************************************************************************** * Utility stuff. *****************************************************************************/ /* for debug purposes. */ char *EDT_TagString(int32 tagType); #ifdef DEBUG void EDT_VerifyLayoutElement( MWContext *pContext, LO_Element *pLoElement, XP_Bool bPrint ); #endif /* Cross platform macros */ /* we may changed how we define editor status */ #define EDT_IS_NEW_DOCUMENT(context) (context != NULL && context->is_editor && context->is_new_document) #define EDT_NEW_DOCUMENT(context,b) if(context != NULL) context->is_new_document=(context->is_editor&&b) /* Helper to gray UI items not allowed when inside Java Script * Note that the return value is TRUE if mixed selection, * allowing the non-script text to be changed. * Current Font Size, Color, and Character attributes will suppress * setting other attributes, so it is OK to call these when mixed */ XP_Bool EDT_IsJavaScript(MWContext *pContext); /* Helper to use for enabling Character properties * (Bold, Italic, etc., but DONT use for clearing (TF_NONE) * or setting Java Script (Server or Client) * Tests for: * 1. Good edit buffer and not blocked because of some action, * 2. Caret or selection is NOT entirely within Java Script, * 3. Caret or selection has some text or is mixed selection * (thus FALSE if single non-text object is selected) */ XP_Bool EDT_CanSetCharacterAttribute(MWContext *pContext); /* Replace the current selection with supplied text */ /* if bReplaceAll is true then pTextToLookFor and the 3 subsequent Boolean need to be set */ void EDT_ReplaceText(MWContext *pContext, char * pReplaceText, XP_Bool bReplaceAll, char *pTextToLookFor, XP_Bool bCaseless, XP_Bool bBackward, XP_Bool bDoWrap); #ifdef FIND_REPLACE /* Currently (12/3/97) not used */ XP_Bool EDT_FindAndReplace(MWContext *pContext, EDT_FindAndReplaceData *pData ); #endif /* Dynamic Object Sizing * Note:xVal and yVal for all functions are in Document coordinates * After calling EDT_StartSizing, either EDT_EndSizing or EDT_CancelSizing * must be called. */ /* How close cursor must be to border to start sizing */ #define ED_SIZING_BORDER 6 /* Get the sizing, selection, or add row/column type define (0 if not at a hit region) * where xVal, yVal is Cursor position we are over * This ignores anything inside of tables or cells, so don't call it * if you want to size an image contained within a cell (use EDT_CanSizeObject instead) * ppElement is optional: If supplied, the relevant table or cell element is returned * (a cell ptr is returned for the row/col operations - use this to get col. or row members) * bModifierKeyPressed is applicable if selecting table (upper left corner) * or extending selection to multiple cells * If TRUE (Ctrl key is pressed in Windows), returns * ED_HIT_SEL_ALL_CELLS instead of ED_HIT_SEL_TABLE */ ED_HitType EDT_GetTableHitRegion(MWContext *pContext, int32 xVal, int32 yVal, LO_Element **ppElement, XP_Bool bModifierKeyPressed); /* Wrapper for ease of use -- gets last-selected table object's hit type and element */ ED_HitType EDT_GetSelectedTableElement(MWContext *pContext, LO_Element **ppElement); /* Select a Table, Row, Column, or Cell * iHitType is a define returned by EDT_GetTableHitRegion() * Returns TRUE if selection was done - it will fail if * missing pointers or iHitType doesn't match pLoElement type or * is not an allowable type for doing selection. * Selection rules: * Table: Any corner is OK (ED_HIT_SEL_TABLE, ED_HIT_SIZE_TABLE, ED_HIT_ADD_ROWS, or ED_HIT_ADD_COLS) * Column: Top of table above desired column (ED_HIT_SEL_COL) * Row: Left edge of table next to desired row (ED_HIT_SEL_ROW) * Cell: Left or top edge of cell, including upper right corner (ED_HIT_SEL_CELL) * * x and y values are used only when selecting rows or columns * * if pLoElement == NULL, we find it from current edit element * (use it this way to select items from a menu when caret is inside a table) * * If bAppendSelection is TRUE, new cells will be added to current selection * (ignored if selecting a table - all cell selection is cleared for that) * * If bExtendSelection is TRUE (Shift key is pressed), * select all cells withing smallest rect from first-selected to supplied cell */ XP_Bool EDT_SelectTableElement(MWContext *pMWContext, int32 x, int32 y, LO_Element *pLoElement, ED_HitType iHitType, XP_Bool bModifierKeyPressed, XP_Bool bExtendSelection); /* Called on mouse-move message after selection was started * on a row, column, or cell element * Returns the hit type: ED_HIT_SEL_ROW, ED_HIT_SEL_COL, ED_HIT_SEL_CELL, or ED_HIT_NONE * reflecting what type of block we are extended, * or ED_HIT_NONE if mouse is outside of the table * Use this to set the type of cursor by the FEs */ ED_HitType EDT_ExtendTableCellSelection(MWContext *pMWContext, int32 x, int32 y); /* Clear the all selected table or cells */ void EDT_ClearTableAndCellSelection(MWContext *pMWContext); XP_Bool EDT_IsTableSelected(MWContext *pMWContext); int EDT_GetSelectedCellCount(MWContext *pMWContext); /* Clear any existing cells selected if current edit element is not inside selection * Call before poping up context menu inside table */ void EDT_ClearCellSelectionIfNotInside(MWContext *pMWContext); /* Call just before bringing up the Table Properties dialog * Supply cell data struct so the iSelectionType and iSelectedCount are filled-in */ void EDT_StartSpecialCellSelection(MWContext *pMWContext, EDT_TableCellData *pCellData); /* Call after closing the Table Properties dialog */ void EDT_ClearSpecialCellSelection(MWContext *pMWContext); /* Called from lo_EndTable (laytable.c) to build list of tables being redrawn */ void EDT_AddToRelayoutTables(MWContext *pMWContext, LO_TableStruct *pLoTable ); /* Called after every table layout so editor size data is accurate */ void EDT_FixupTableData(MWContext *pMWContext); /* Get the sizing type define (0 if not at a sizing location) * where xVal, yVal is Cursor position and pElement is the element * we are over -- if NULL, we will find it (param used for efficiency) */ ED_SizeStyle EDT_CanSizeObject(MWContext *pContext, LO_Element *pLoElement, int32 xVal, int32 yVal); /* Return TRUE if we are currently sizing */ XP_Bool EDT_IsSizing(MWContext *pContext); /* If bLockAspect is TRUE, constrain rect to keep original aspect ratio * This returns the rect to draw sizing feedback in View's coordinate system * Returns sizing style if sizing was started OK */ ED_SizeStyle EDT_StartSizing(MWContext *pContext, LO_Element *pLoElement, int32 xVal, int32 yVal, XP_Bool bLockAspect, XP_Rect *pRect); /* Get the rect in View coordinates, so you can use it * directly for drawing "selection feedback" * Returns TRUE if this rect is different from the last * one calculated by EDT_StartSizing or EDT_GetSizingRect, * so you need to do sizing feedback only if we return TRUE; */ XP_Bool EDT_GetSizingRect(MWContext *pContext, int32 xVal, int32 yVal, XP_Bool bLockAspect, XP_Rect *pRect); /* Uses rect (xVal and yVal) from last mouse move to * get new width and height and change current object size */ void EDT_EndSizing(MWContext *pContext); /* Call this to abort sizing */ void EDT_CancelSizing(MWContext *pContext); /* * Editor plugin interface * The strings returned by this interface are from the Java heap. This means that * they will automaticly be garbage collected once there is no thread that * is refering to them. So XP_STRDUP them if you want to hold onto them. */ void EDT_RegisterPlugin(char* csFileSpec); /* Called by front end to register a plugin file. */ /* The following calls are cheap enough to be called as often as you like. */ int32 EDT_NumberOfPluginCategories(void); int32 EDT_NumberOfPlugins(int32 category); /* The result strings are garbage collected by the Java runtime. They are in UTF8 encoding. */ char* EDT_GetPluginCategoryName(int32 category); char* EDT_GetPluginName(int32 category, int32 index); char* EDT_GetPluginMenuHelp(int32 category, int32 index); /* * Perform a Composer Plugin by category and index. Returns TRUE if the Plug-in was launched * successfully. Returns FALSE if the Plug-in failed to run. If this method returns true, then * the actual Plug-in runs asynchronously. When the plugin completes, doneFunction is called * in the main UI thread. Alternatively, you can poll EDT_IsPluginActive to find out when the * Plug-in is done. * If you don't want to be called back when the plugin completes, pass NULL for doneFunction. * "hook" is a variable for you to use any way you want. It is passed back to your doneFunction. */ XP_Bool EDT_PerformPlugin(MWContext *pContext, int32 category, int32 index, EDT_ImageEncoderCallbackFn doneFunction, void* hook); /* * Just like EDT_PerformPlugin, except that the Plugin is identified by className rather than by * category and index. The className is a fully qualified Java class name in UTF8 encoding. * doneFunction can be NULL, in which case it won't be called. * Under some circumstances, the doneFunction may be called immediately. */ XP_Bool EDT_PerformPluginByClassName(MWContext *pContext, char* className, EDT_ImageEncoderCallbackFn doneFunction, void* hook); /* * Just like EDT_PerformPlugin, except that all event handlers are called for * a particular event. * doneFunction can be NULL, in which case it won't be called. * Under some circumstances, the doneFunction may be called immediately. * pDocURL can be null, or empty */ void EDT_PerformEvent(MWContext *pContext, char* pEvent, char* pDocURL, XP_Bool bCanChangeDocument, XP_Bool bCanCancel, EDT_ImageEncoderCallbackFn doneFunction, void* hook); XP_Bool EDT_IsPluginActive(MWContext* pContext); void EDT_StopPlugin(MWContext* pContext); /* Used internally by the Composer Plug-in implementation. */ void EDT_ComposerPluginCallback(MWContext* pContext, int32 action, struct java_lang_Object* pArg); /* Image encoder interface. * The strings returned by this interface are from the Java heap. This means that * they will automaticly be garbage collected once there is no thread that * is refering to them. So XP_STRDUP them if you want to hold onto them. */ int32 EDT_NumberOfEncoders(void); char* EDT_GetEncoderName(int32 index); /* The human name of the encoding. e.g. JPEG */ char* EDT_GetEncoderFileExtension(int32 index); /* The file extension, without the period. e.g. jpg */ char* EDT_GetEncoderFileType(int32 index); /* The Macintosh FileType field. An array of 4 characters. */ char* EDT_GetEncoderMenuHelp(int32 index); /* A sentence describing the encoding. e.g. Joint Picture Encoding Group */ XP_Bool EDT_GetEncoderNeedsQuantizedSource(int32 index); /* TRUE if the encoder needs 256 distinct colors or less. */ /* Returns FALSE if there was a problem, or TRUE if the encoder was started successfully. * The pixels are copied -- you can dispose of the pixels as soon as EDT_StartEncoder returns. * */ XP_Bool EDT_StartEncoder(MWContext* pContext, int32 index, int32 width, int32 height, char** pixels, char* csFileName, EDT_ImageEncoderCallbackFn doneFunction, void* hook); /* Will stop the encoder, and will cause the doneFunction to be called. */ void EDT_StopEncoder(MWContext* pContext); /* Save and restore the cursor position or selection */ ED_BufferOffset EDT_GetInsertPointOffset( MWContext *pContext ); void EDT_SetInsertPointToOffset( MWContext *pContext, ED_BufferOffset i, int32 iLen ); /* Given a character offset, return the layout element and offset for that character */ void EDT_OffsetToLayoutElement( MWContext *pContext, ED_BufferOffset i, LO_Element * *element, int32 *caretPos); ED_BufferOffset EDT_LayoutElementToOffset( MWContext *pContext, LO_Element *element, int32 caretPos); /* Return the layout textblock for a text element */ LO_TextBlock* EDT_GetTextBlock(MWContext *pContext, LO_Element *le); /* Spell check API */ XP_Bool EDT_SelectFirstMisspelledWord( MWContext *pContext ); XP_Bool EDT_SelectNextMisspelledWord( MWContext *pContext ); XP_HUGE_CHAR_PTR EDT_GetPositionalText( MWContext* pContext ); void EDT_SetRefresh( MWContext *pContext, XP_Bool bRefreshOn ); void EDT_ReplaceMisspelledWord( MWContext *pContext, char* pOldWord, char*pNewWord, XP_Bool bAll ); /* Ignore a misspelled word. * If pWord != NULL and bAll == TRUE. ignore all instances of the specified word * If pWord == NULL, ignore all misspelled words */ void EDT_IgnoreMisspelledWord( MWContext *pContext, char* pWord, XP_Bool bAll ); /* The selection is 1/2 open -- if the start and end are the same value, then * the selection is an insertion point. */ void EDT_GetSelectionOffsets(MWContext *pContext, ED_BufferOffset* pStart, ED_BufferOffset* pEnd); /* * Set the document encoding. Returns TRUE if the encoding * was changed, or FALSE if it was not. (An encoding change * may require a save of the current document. The user may * cancel the save.) * */ XP_Bool EDT_SetEncoding(MWContext* pContext, int16 csid); /* Take the document for current contextand change appropriate * params to make it look like a "Untitled" new document * Allows loading any document as a "Template" */ void EDT_ConvertCurrentDocToNewDoc(MWContext * pMWContext); /* Assemble the filename part from supplied URL to * the base URL, replacing any filename in the latter * pURL can be most anything, full URL or local filename * If NULL, pBaseURL is returned without its filename * (Use this to strip off filename from a base URL); * Caller must free returned string */ char * EDT_ReplaceFilename(char * pBaseURL, char * pURL, XP_Bool bMustHaveExtension); /* Simply returns the filename part of a URL or local filespec * Stuff starting with "#" or "?" is ommited * Used with EDT_ReplaceFilenam(pURL, NULL) parse out a URL * into separate "directory" and "filename" parts * If bMustHaveExtension is TRUE, then name after last "/" or "\" * must have a period indicating it has an extension * Note: Assumes bMustHaveExtension = TRUE when getting filename * Caller must free returned string */ char * EDT_GetFilename(char * pURL, XP_Bool bMustHaveExtension); /* Return a destination URL for publishing: * If last-failed-published URL (saved globally) is same as URL about to be published, * then always returns the location, Username, and password last attempted, * obtained from prefs: "editor.publish_last_loc" and "editor.publish_last_password" * else: * If current page URL is * 1. Remote URL: Return current page name as is, with anything after filename stripped * 2. Local File: Return last-good location (from pref: "editor.publish_history_0") * or default (if no last-location) from "editor.publish_location" * *ppFilename is set to filename portion of current page * and UserName is parsed out the pref string and returned in ppUsername * 3. New (unsaved) page: Return pref URL as above, but *ppFilename is set to NULL * * Note: Assumes bMustHaveExtension = TRUE when getting filename * If available, the last-used password is also supplied * Caller must free returned strings */ char * EDT_GetDefaultPublishURL(MWContext * pMWContext, char **ppFilename, char **ppUserName, char **ppPassword); /* The maximum number of history items shown */ #define MAX_EDIT_HISTORY_LOCATIONS 10 /* * Get the location, username, and password (plain text) for the Nth * publish history location. Caller must XP_FREE the returned location, * username, passwd. */ XP_Bool EDT_GetPublishingHistory(unsigned n, char** loc, char** u, char** p); /* * Copy the last publish location to the 0th history, move everyone up one. */ void EDT_SyncPublishingHistory(void); /* Get URL and TITLE from the recently-edited history list kept in preferences * Similar to Publish history list, except caller should NOT XP_FREE the returned strings * because they are cached in local string arrays for quicker access * * Supply MWContext pointer to check if the current document is * in the list before or at the requested URL. * If it is, the next item is returned instead, thus the current doc * never shows up in the list * Because of this behavior, this function should be used with MWContext* * both to build the menu items and also to get the URL when the menu item is executed * * Note: If there is no Title, *pTitle is set to NULL * (Front ends should use a compressed version of pUrl instead) */ XP_Bool EDT_GetEditHistory(MWContext * pMWContext, unsigned n, char** pUrl, char** pTitle); /* Call this after opening a file or URL to make it * the most-recently-edited document in the URL history in preferences */ void EDT_SyncEditHistory(MWContext * pMWContext); /* Construct a page title from supplied filename, * Extracts the filename part WITHOUT extension * Stuff starting with "#" or "?" is ommited * Caller must free returned string */ char * EDT_GetPageTitleFromFilename(char * pFilename); /* * Call EDT_PreOpen when the user requests that you open an existing HTML document. * You will get called back with status that indicates whether or not to open the * document. You can pass anything you want as the hook argument -- it will be * passed back to you. * * The MWContext passed to EDT_PreOpen is only used for reporting errors. * * Use the pURL that's passed back to you as the URL to open -- it may be different * than the URL you passed in. * * Note: Unlike other similar calls, in EDT_PreOpen the doneFunction will always be * called. Under certain circumstances, however, the doneFunction will be called * immediately, before EDT_PreOpen even returns. * */ typedef void (*EDT_PreOpenCallbackFn)(XP_Bool bUserCancled, char* pURL, void* hook); void EDT_PreOpen(MWContext *pErrorContext,char* pURL, EDT_PreOpenCallbackFn doneFunction, void* hook); /* * Call EDT_PreClose when an editor context is about to be closed. Don't actually * close the window until the passed in callback function is called. * * Similar to EDT_PreOpen, the doneFunction will always be called, and may be called * befre EDT_PreClose returns. * */ typedef void (*EDT_PreCloseCallbackFn)(void* hook); void EDT_PreClose(MWContext * pMWContext,char* pURL, EDT_PreCloseCallbackFn doneFunction, void* hook); /* * True if both urls are the same, ignores any username/password * information. Does caseless comparison for file:// URLs * on windows and mac. * url1 and url2 are relative to base1 and base2, respectively. * If url1 or url2 is already absolute, base1 or base2 can * be passed in as NULL. */ XP_Bool EDT_IsSameURL(char *url1,char *url2,char *base1,char *base2); /* * Extract the Extra HTML string from the ED_Element pointer in an image struct * (ED_Element is a void* to external users * Implemented in edtutil.cpp * Caller must XP_FREE result */ char * EDT_GetExtraHTML_FromImage(LO_ImageStruct *pImage); XP_Bool EDT_IsWritableBuffer(MWContext *pContext); /* * Hack in pre-encrypted files into the editor. This function lets us * treat the editor's TapeFS as a net stream without all the baggage associated * with the regular edt_Stream functions. */ NET_StreamClass *EDT_NetToTape(void *); /* * Several functions to handle the encrypt/no-encrypt flag */ void EDT_EncryptToggle(MWContext *pContext); void EDT_EncryptSet(MWContext *pContext); void EDT_EncryptReset(MWContext *pContext); PRBool EDT_EncryptState(MWContext *pContext); /* Used for QA only - Ctrl+Alt+Shift+N accelerator for automated testing */ void EDT_SelectNextNonTextObject(MWContext *pContext); XP_END_PROTOS #endif /* EDITOR */ #endif /* _edt_h_ */