/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla JavaScript code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1999-2001 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Brendan Eich (Original Author) * * Alternatively, the contents of this file may be used under the terms of * either of the GNU General Public License Version 2 or later (the "GPL"), * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #ifndef pldhash_h___ #define pldhash_h___ /* * Double hashing, a la Knuth 6. * GENERATED BY js/src/plify_jsdhash.sed -- DO NOT EDIT!!! */ #include "prtypes.h" PR_BEGIN_EXTERN_C #ifdef DEBUG_XXXbrendan #define PL_DHASHMETER 1 #endif /* Table size limit, do not equal or exceed (see min&maxAlphaFrac, below). */ #undef PL_DHASH_SIZE_LIMIT #define PL_DHASH_SIZE_LIMIT PR_BIT(24) /* Minimum table size, or gross entry count (net is at most .75 loaded). */ #ifndef PL_DHASH_MIN_SIZE #define PL_DHASH_MIN_SIZE 16 #elif (PL_DHASH_MIN_SIZE & (PL_DHASH_MIN_SIZE - 1)) != 0 #error "PL_DHASH_MIN_SIZE must be a power of two!" #endif /* * Multiplicative hash uses an unsigned 32 bit integer and the golden ratio, * expressed as a fixed-point 32-bit fraction. */ #define PL_DHASH_BITS 32 #define PL_DHASH_GOLDEN_RATIO 0x9E3779B9U /* Primitive and forward-struct typedefs. */ typedef PRUint32 PLDHashNumber; typedef struct PLDHashEntryHdr PLDHashEntryHdr; typedef struct PLDHashEntryStub PLDHashEntryStub; typedef struct PLDHashTable PLDHashTable; typedef struct PLDHashTableOps PLDHashTableOps; /* * Table entry header structure. * * In order to allow in-line allocation of key and value, we do not declare * either here. Instead, the API uses const void *key as a formal parameter, * and asks each entry for its key when necessary via a getKey callback, used * when growing or shrinking the table. Other callback types are defined * below and grouped into the PLDHashTableOps structure, for single static * initialization per hash table sub-type. * * Each hash table sub-type should nest the PLDHashEntryHdr structure at the * front of its particular entry type. The keyHash member contains the result * of multiplying the hash code returned from the hashKey callback (see below) * by PL_DHASH_GOLDEN_RATIO, then constraining the result to avoid the magic 0 * and 1 values. The stored keyHash value is table size invariant, and it is * maintained automatically by PL_DHashTableOperate -- users should never set * it, and its only uses should be via the entry macros below. * * The PL_DHASH_ENTRY_IS_LIVE macro tests whether entry is neither free nor * removed. An entry may be either busy or free; if busy, it may be live or * removed. Consumers of this API should not access members of entries that * are not live. * * However, use PL_DHASH_ENTRY_IS_BUSY for faster liveness testing of entries * returned by PL_DHashTableOperate, as PL_DHashTableOperate never returns a * non-live, busy (i.e., removed) entry pointer to its caller. See below for * more details on PL_DHashTableOperate's calling rules. */ struct PLDHashEntryHdr { PLDHashNumber keyHash; /* every entry must begin like this */ }; #define PL_DHASH_ENTRY_IS_FREE(entry) ((entry)->keyHash == 0) #define PL_DHASH_ENTRY_IS_BUSY(entry) (!PL_DHASH_ENTRY_IS_FREE(entry)) #define PL_DHASH_ENTRY_IS_LIVE(entry) ((entry)->keyHash >= 2) /* * A PLDHashTable is currently 8 words (without the PL_DHASHMETER overhead) * on most architectures, and may be allocated on the stack or within another * structure or class (see below for the Init and Finish functions to use). * * To decide whether to use double hashing vs. chaining, we need to develop a * trade-off relation, as follows: * * Let alpha be the load factor, esize the entry size in words, count the * entry count, and pow2 the power-of-two table size in entries. * * (PLDHashTable overhead) > (PLHashTable overhead) * (unused table entry space) > (malloc and .next overhead per entry) + * (buckets overhead) * (1 - alpha) * esize * pow2 > 2 * count + pow2 * * Notice that alpha is by definition (count / pow2): * * (1 - alpha) * esize * pow2 > 2 * alpha * pow2 + pow2 * (1 - alpha) * esize > 2 * alpha + 1 * * esize > (1 + 2 * alpha) / (1 - alpha) * * This assumes both tables must keep keyHash, key, and value for each entry, * where key and value point to separately allocated strings or structures. * If key and value can be combined into one pointer, then the trade-off is: * * esize > (1 + 3 * alpha) / (1 - alpha) * * If the entry value can be a subtype of PLDHashEntryHdr, rather than a type * that must be allocated separately and referenced by an entry.value pointer * member, and provided key's allocation can be fused with its entry's, then * k (the words wasted per entry with chaining) is 4. * * To see these curves, feed gnuplot input like so: * * gnuplot> f(x,k) = (1 + k * x) / (1 - x) * gnuplot> plot [0:.75] f(x,2), f(x,3), f(x,4) * * For k of 2 and a well-loaded table (alpha > .5), esize must be more than 4 * words for chaining to be more space-efficient than double hashing. * * Solving for alpha helps us decide when to shrink an underloaded table: * * esize > (1 + k * alpha) / (1 - alpha) * esize - alpha * esize > 1 + k * alpha * esize - 1 > (k + esize) * alpha * (esize - 1) / (k + esize) > alpha * * alpha < (esize - 1) / (esize + k) * * Therefore double hashing should keep alpha >= (esize - 1) / (esize + k), * assuming esize is not too large (in which case, chaining should probably be * used for any alpha). For esize=2 and k=3, we want alpha >= .2; for esize=3 * and k=2, we want alpha >= .4. For k=4, esize could be 6, and alpha >= .5 * would still obtain. See the PL_DHASH_MIN_ALPHA macro further below. * * The current implementation uses a configurable lower bound on alpha, which * defaults to .25, when deciding to shrink the table (while still respecting * PL_DHASH_MIN_SIZE). * * Note a qualitative difference between chaining and double hashing: under * chaining, entry addresses are stable across table shrinks and grows. With * double hashing, you can't safely hold an entry pointer and use it after an * ADD or REMOVE operation, unless you sample table->generation before adding * or removing, and compare the sample after, dereferencing the entry pointer * only if table->generation has not changed. * * The moral of this story: there is no one-size-fits-all hash table scheme, * but for small table entry size, and assuming entry address stability is not * required, double hashing wins. */ struct PLDHashTable { const PLDHashTableOps *ops; /* virtual operations, see below */ void *data; /* ops- and instance-specific data */ PRInt16 hashShift; /* multiplicative hash shift */ uint8 maxAlphaFrac; /* 8-bit fixed point max alpha */ uint8 minAlphaFrac; /* 8-bit fixed point min alpha */ PRUint32 entrySize; /* number of bytes in an entry */ PRUint32 entryCount; /* number of entries in table */ PRUint32 removedCount; /* removed entry sentinels in table */ PRUint32 generation; /* entry storage generation number */ char *entryStore; /* entry storage */ #ifdef PL_DHASHMETER struct PLDHashStats { PRUint32 searches; /* total number of table searches */ PRUint32 steps; /* hash chain links traversed */ PRUint32 hits; /* searches that found key */ PRUint32 misses; /* searches that didn't find key */ PRUint32 lookups; /* number of PL_DHASH_LOOKUPs */ PRUint32 addMisses; /* adds that miss, and do work */ PRUint32 addOverRemoved; /* adds that recycled a removed entry */ PRUint32 addHits; /* adds that hit an existing entry */ PRUint32 addFailures; /* out-of-memory during add growth */ PRUint32 removeHits; /* removes that hit, and do work */ PRUint32 removeMisses; /* useless removes that miss */ PRUint32 removeFrees; /* removes that freed entry directly */ PRUint32 removeEnums; /* removes done by Enumerate */ PRUint32 grows; /* table expansions */ PRUint32 shrinks; /* table contractions */ PRUint32 compresses; /* table compressions */ PRUint32 enumShrinks; /* contractions after Enumerate */ } stats; #endif }; /* * Size in entries (gross, not net of free and removed sentinels) for table. * We store hashShift rather than sizeLog2 to optimize the collision-free case * in SearchTable. */ #define PL_DHASH_TABLE_SIZE(table) PR_BIT(PL_DHASH_BITS - (table)->hashShift) /* * Table space at entryStore is allocated and freed using these callbacks. * The allocator should return null on error only (not if called with nbytes * equal to 0; but note that pldhash.c code will never call with 0 nbytes). */ typedef void * (* PR_CALLBACK PLDHashAllocTable)(PLDHashTable *table, PRUint32 nbytes); typedef void (* PR_CALLBACK PLDHashFreeTable) (PLDHashTable *table, void *ptr); /* * When a table grows or shrinks, each entry is queried for its key using this * callback. NB: in that event, entry is not in table any longer; it's in the * old entryStore vector, which is due to be freed once all entries have been * moved via moveEntry callbacks. */ typedef const void * (* PR_CALLBACK PLDHashGetKey) (PLDHashTable *table, PLDHashEntryHdr *entry); /* * Compute the hash code for a given key to be looked up, added, or removed * from table. A hash code may have any PLDHashNumber value. */ typedef PLDHashNumber (* PR_CALLBACK PLDHashHashKey) (PLDHashTable *table, const void *key); /* * Compare the key identifying entry in table with the provided key parameter. * Return PR_TRUE if keys match, PR_FALSE otherwise. */ typedef PRBool (* PR_CALLBACK PLDHashMatchEntry)(PLDHashTable *table, const PLDHashEntryHdr *entry, const void *key); /* * Copy the data starting at from to the new entry storage at to. Do not add * reference counts for any strong references in the entry, however, as this * is a "move" operation: the old entry storage at from will be freed without * any reference-decrementing callback shortly. */ typedef void (* PR_CALLBACK PLDHashMoveEntry)(PLDHashTable *table, const PLDHashEntryHdr *from, PLDHashEntryHdr *to); /* * Clear the entry and drop any strong references it holds. This callback is * invoked during a PL_DHASH_REMOVE operation (see below for operation codes), * but only if the given key is found in the table. */ typedef void (* PR_CALLBACK PLDHashClearEntry)(PLDHashTable *table, PLDHashEntryHdr *entry); /* * Called when a table (whether allocated dynamically by itself, or nested in * a larger structure, or allocated on the stack) is finished. This callback * allows table->ops-specific code to finalize table->data. */ typedef void (* PR_CALLBACK PLDHashFinalize) (PLDHashTable *table); /* * Initialize a new entry, apart from keyHash. This function is called when * PL_DHashTableOperate's PL_DHASH_ADD case finds no existing entry for the * given key, and must add a new one. At that point, entry->keyHash is not * set yet, to avoid claiming the last free entry in a severely overloaded * table. */ typedef PRBool (* PR_CALLBACK PLDHashInitEntry)(PLDHashTable *table, PLDHashEntryHdr *entry, const void *key); /* * Finally, the "vtable" structure for PLDHashTable. The first eight hooks * must be provided by implementations; they're called unconditionally by the * generic pldhash.c code. Hooks after these may be null. * * Summary of allocation-related hook usage with C++ placement new emphasis: * allocTable Allocate raw bytes with malloc, no ctors run. * freeTable Free raw bytes with free, no dtors run. * initEntry Call placement new using default key-based ctor. * Return PR_TRUE on success, PR_FALSE on error. * moveEntry Call placement new using copy ctor, run dtor on old * entry storage. * clearEntry Run dtor on entry. * finalize Stub unless table->data was initialized and needs to * be finalized. * * Note the reason why initEntry is optional: the default hooks (stubs) clear * entry storage: On successful PL_DHashTableOperate(tbl, key, PL_DHASH_ADD), * the returned entry pointer addresses an entry struct whose keyHash member * has been set non-zero, but all other entry members are still clear (null). * PL_DHASH_ADD callers can test such members to see whether the entry was * newly created by the PL_DHASH_ADD call that just succeeded. If placement * new or similar initialization is required, define an initEntry hook. Of * course, the clearEntry hook must zero or null appropriately. * * XXX assumes 0 is null for pointer types. */ struct PLDHashTableOps { /* Mandatory hooks. All implementations must provide these. */ PLDHashAllocTable allocTable; PLDHashFreeTable freeTable; PLDHashGetKey getKey; PLDHashHashKey hashKey; PLDHashMatchEntry matchEntry; PLDHashMoveEntry moveEntry; PLDHashClearEntry clearEntry; PLDHashFinalize finalize; /* Optional hooks start here. If null, these are not called. */ PLDHashInitEntry initEntry; }; /* * Default implementations for the above ops. */ PR_EXTERN(void *) PL_DHashAllocTable(PLDHashTable *table, PRUint32 nbytes); PR_EXTERN(void) PL_DHashFreeTable(PLDHashTable *table, void *ptr); PR_EXTERN(PLDHashNumber) PL_DHashStringKey(PLDHashTable *table, const void *key); /* A minimal entry contains a keyHash header and a void key pointer. */ struct PLDHashEntryStub { PLDHashEntryHdr hdr; const void *key; }; PR_EXTERN(const void *) PL_DHashGetKeyStub(PLDHashTable *table, PLDHashEntryHdr *entry); PR_EXTERN(PLDHashNumber) PL_DHashVoidPtrKeyStub(PLDHashTable *table, const void *key); PR_EXTERN(PRBool) PL_DHashMatchEntryStub(PLDHashTable *table, const PLDHashEntryHdr *entry, const void *key); PR_EXTERN(PRBool) PL_DHashMatchStringKey(PLDHashTable *table, const PLDHashEntryHdr *entry, const void *key); PR_EXTERN(void) PL_DHashMoveEntryStub(PLDHashTable *table, const PLDHashEntryHdr *from, PLDHashEntryHdr *to); PR_EXTERN(void) PL_DHashClearEntryStub(PLDHashTable *table, PLDHashEntryHdr *entry); PR_EXTERN(void) PL_DHashFreeStringKey(PLDHashTable *table, PLDHashEntryHdr *entry); PR_EXTERN(void) PL_DHashFinalizeStub(PLDHashTable *table); /* * If you use PLDHashEntryStub or a subclass of it as your entry struct, and * if your entries move via memcpy and clear via memset(0), you can use these * stub operations. */ PR_EXTERN(const PLDHashTableOps *) PL_DHashGetStubOps(void); /* * Dynamically allocate a new PLDHashTable using malloc, initialize it using * PL_DHashTableInit, and return its address. Return null on malloc failure. * Note that the entry storage at table->entryStore will be allocated using * the ops->allocTable callback. */ PR_EXTERN(PLDHashTable *) PL_NewDHashTable(const PLDHashTableOps *ops, void *data, PRUint32 entrySize, PRUint32 capacity); /* * Finalize table's data, free its entry storage (via table->ops->freeTable), * and return the memory starting at table to the malloc heap. */ PR_EXTERN(void) PL_DHashTableDestroy(PLDHashTable *table); /* * Initialize table with ops, data, entrySize, and capacity. Capacity is a * guess for the smallest table size at which the table will usually be less * than 75% loaded (the table will grow or shrink as needed; capacity serves * only to avoid inevitable early growth from PL_DHASH_MIN_SIZE). */ PR_EXTERN(PRBool) PL_DHashTableInit(PLDHashTable *table, const PLDHashTableOps *ops, void *data, PRUint32 entrySize, PRUint32 capacity); /* * Set maximum and minimum alpha for table. The defaults are 0.75 and .25. * maxAlpha must be in [0.5, 0.9375] for the default PL_DHASH_MIN_SIZE; or if * MinSize=PL_DHASH_MIN_SIZE <= 256, in [0.5, (float)(MinSize-1)/MinSize]; or * else in [0.5, 255.0/256]. minAlpha must be in [0, maxAlpha / 2), so that * we don't shrink on the very next remove after growing a table upon adding * an entry that brings entryCount past maxAlpha * tableSize. */ PR_IMPLEMENT(void) PL_DHashTableSetAlphaBounds(PLDHashTable *table, float maxAlpha, float minAlpha); /* * Call this macro with k, the number of pointer-sized words wasted per entry * under chaining, to compute the minimum alpha at which double hashing still * beats chaining. */ #define PL_DHASH_MIN_ALPHA(table, k) \ ((float)((table)->entrySize / sizeof(void *) - 1) \ / ((table)->entrySize / sizeof(void *) + (k))) /* * Finalize table's data, free its entry storage using table->ops->freeTable, * and leave its members unchanged from their last live values (which leaves * pointers dangling). If you want to burn cycles clearing table, it's up to * your code to call memset. */ PR_EXTERN(void) PL_DHashTableFinish(PLDHashTable *table); /* * To consolidate keyHash computation and table grow/shrink code, we use a * single entry point for lookup, add, and remove operations. The operation * codes are declared here, along with codes returned by PLDHashEnumerator * functions, which control PL_DHashTableEnumerate's behavior. */ typedef enum PLDHashOperator { PL_DHASH_LOOKUP = 0, /* lookup entry */ PL_DHASH_ADD = 1, /* add entry */ PL_DHASH_REMOVE = 2, /* remove entry, or enumerator says remove */ PL_DHASH_NEXT = 0, /* enumerator says continue */ PL_DHASH_STOP = 1 /* enumerator says stop */ } PLDHashOperator; /* * To lookup a key in table, call: * * entry = PL_DHashTableOperate(table, key, PL_DHASH_LOOKUP); * * If PL_DHASH_ENTRY_IS_BUSY(entry) is true, key was found and it identifies * entry. If PL_DHASH_ENTRY_IS_FREE(entry) is true, key was not found. * * To add an entry identified by key to table, call: * * entry = PL_DHashTableOperate(table, key, PL_DHASH_ADD); * * If entry is null upon return, then either the table is severely overloaded, * and memory can't be allocated for entry storage via table->ops->allocTable; * Or if table->ops->initEntry is non-null, the table->ops->initEntry op may * have returned false. * * Otherwise, entry->keyHash has been set so that PL_DHASH_ENTRY_IS_BUSY(entry) * is true, and it is up to the caller to initialize the key and value parts * of the entry sub-type, if they have not been set already (i.e. if entry was * not already in the table, and if the optional initEntry hook was not used). * * To remove an entry identified by key from table, call: * * (void) PL_DHashTableOperate(table, key, PL_DHASH_REMOVE); * * If key's entry is found, it is cleared (via table->ops->clearEntry) and * the entry is marked so that PL_DHASH_ENTRY_IS_FREE(entry). This operation * returns null unconditionally; you should ignore its return value. */ PR_EXTERN(PLDHashEntryHdr *) PL_DHashTableOperate(PLDHashTable *table, const void *key, PLDHashOperator op); /* * Remove an entry already accessed via LOOKUP or ADD. * * NB: this is a "raw" or low-level routine, intended to be used only where * the inefficiency of a full PL_DHashTableOperate (which rehashes in order * to find the entry given its key) is not tolerable. This function does not * shrink the table if it is underloaded. It does not update stats #ifdef * PL_DHASHMETER, either. */ PR_EXTERN(void) PL_DHashTableRawRemove(PLDHashTable *table, PLDHashEntryHdr *entry); /* * Enumerate entries in table using etor: * * count = PL_DHashTableEnumerate(table, etor, arg); * * PL_DHashTableEnumerate calls etor like so: * * op = etor(table, entry, number, arg); * * where number is a zero-based ordinal assigned to live entries according to * their order in table->entryStore. * * The return value, op, is treated as a set of flags. If op is PL_DHASH_NEXT, * then continue enumerating. If op contains PL_DHASH_REMOVE, then clear (via * table->ops->clearEntry) and free entry. Then we check whether op contains * PL_DHASH_STOP; if so, stop enumerating and return the number of live entries * that were enumerated so far. Return the total number of live entries when * enumeration completes normally. * * If etor calls PL_DHashTableOperate on table with op != PL_DHASH_LOOKUP, it * must return PL_DHASH_STOP; otherwise undefined behavior results. * * If any enumerator returns PL_DHASH_REMOVE, table->entryStore may be shrunk * or compressed after enumeration, but before PL_DHashTableEnumerate returns. * Such an enumerator therefore can't safely set aside entry pointers, but an * enumerator that never returns PL_DHASH_REMOVE can set pointers to entries * aside, e.g., to avoid copying live entries into an array of the entry type. * Copying entry pointers is cheaper, and safe so long as the caller of such a * "stable" Enumerate doesn't use the set-aside pointers after any call either * to PL_DHashTableOperate, or to an "unstable" form of Enumerate, which might * grow or shrink entryStore. * * If your enumerator wants to remove certain entries, but set aside pointers * to other entries that it retains, it can use PL_DHashTableRawRemove on the * entries to be removed, returning PL_DHASH_NEXT to skip them. Likewise, if * you want to remove entries, but for some reason you do not want entryStore * to be shrunk or compressed, you can call PL_DHashTableRawRemove safely on * the entry being enumerated, rather than returning PL_DHASH_REMOVE. */ typedef PLDHashOperator (* PR_CALLBACK PLDHashEnumerator)(PLDHashTable *table, PLDHashEntryHdr *hdr, PRUint32 number, void *arg); PR_EXTERN(PRUint32) PL_DHashTableEnumerate(PLDHashTable *table, PLDHashEnumerator etor, void *arg); #ifdef PL_DHASHMETER #include PR_EXTERN(void) PL_DHashTableDumpMeter(PLDHashTable *table, PLDHashEnumerator dump, FILE *fp); #endif PR_END_EXTERN_C #endif /* pldhash_h___ */