/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* ***** BEGIN LICENSE BLOCK ***** * Version: NPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Netscape Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License at * http://www.mozilla.org/NPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is Mozilla Communicator client code. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1998 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Steve Clark * Pierre Phaneuf * L. David Baron * Robert O'Callahan * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the NPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the NPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ #include "nsCOMPtr.h" #include "nsLineLayout.h" #include "nsBlockFrame.h" #include "nsInlineFrame.h" #include "nsStyleConsts.h" #include "nsHTMLContainerFrame.h" #include "nsSpaceManager.h" #include "nsStyleContext.h" #include "nsIPresContext.h" #include "nsIFontMetrics.h" #include "nsIRenderingContext.h" #include "nsLayoutAtoms.h" #include "nsPlaceholderFrame.h" #include "nsReflowPath.h" #include "nsIDocument.h" #include "nsIHTMLDocument.h" #include "nsIContent.h" #include "nsITextContent.h" #include "nsIView.h" #include "nsIViewManager.h" #include "nsHTMLAtoms.h" #include "nsTextFragment.h" #include "nsBidiUtils.h" #define FIX_FOR_BUG_40882 #ifdef DEBUG #undef NOISY_HORIZONTAL_ALIGN #undef NOISY_VERTICAL_ALIGN #undef REALLY_NOISY_VERTICAL_ALIGN #undef NOISY_REFLOW #undef REALLY_NOISY_REFLOW #undef NOISY_PUSHING #undef REALLY_NOISY_PUSHING #undef DEBUG_ADD_TEXT #undef NOISY_MAX_ELEMENT_SIZE #undef REALLY_NOISY_MAX_ELEMENT_SIZE #undef NOISY_CAN_PLACE_FRAME #undef NOISY_TRIM #undef REALLY_NOISY_TRIM #endif //---------------------------------------------------------------------- #define FIX_BUG_50257 #define PLACED_LEFT 0x1 #define PLACED_RIGHT 0x2 #define HACK_MEW //#undef HACK_MEW #ifdef HACK_MEW static nscoord AccumulateImageSizes(nsIPresContext& aPresContext, nsIFrame& aFrame) { nscoord sizes = 0; // see if aFrame is an image frame first if (aFrame.GetType() == nsLayoutAtoms::imageFrame) { sizes += aFrame.GetSize().width; } else { // see if there are children to process // XXX: process alternate child lists? nsIFrame* child = aFrame.GetFirstChild(nsnull); while (child) { // recurse: note that we already know we are in a child frame, so no need to track further sizes += AccumulateImageSizes(aPresContext, *child); // now next sibling child = child->GetNextSibling(); } } return sizes; } static PRBool InUnconstrainedTableCell(const nsHTMLReflowState& aBlockReflowState) { PRBool result = PR_FALSE; // get the parent reflow state const nsHTMLReflowState* parentReflowState = aBlockReflowState.parentReflowState; if (parentReflowState) { // check if the frame is a tablecell NS_ASSERTION(parentReflowState->mStyleDisplay, "null styleDisplay in parentReflowState unexpected"); if (parentReflowState->mStyleDisplay && parentReflowState->mStyleDisplay->mDisplay == NS_STYLE_DISPLAY_TABLE_CELL) { // see if width is unconstrained or percent NS_ASSERTION(parentReflowState->mStylePosition, "null stylePosition in parentReflowState unexpected"); if(parentReflowState->mStylePosition) { switch(parentReflowState->mStylePosition->mWidth.GetUnit()) { case eStyleUnit_Auto : case eStyleUnit_Null : result = PR_TRUE; break; default: result = PR_FALSE; break; } } } } return result; } #endif MOZ_DECL_CTOR_COUNTER(nsLineLayout) nsLineLayout::nsLineLayout(nsIPresContext* aPresContext, nsSpaceManager* aSpaceManager, const nsHTMLReflowState* aOuterReflowState, PRBool aComputeMaxElementWidth) : mPresContext(aPresContext), mSpaceManager(aSpaceManager), mBlockReflowState(aOuterReflowState), mBlockRS(nsnull),/* XXX temporary */ mMinLineHeight(0), mComputeMaxElementWidth(aComputeMaxElementWidth), mTextIndent(0), mWordFrames(0) { MOZ_COUNT_CTOR(nsLineLayout); // Stash away some style data that we need mStyleText = aOuterReflowState->frame->GetStyleText(); mTextAlign = mStyleText->mTextAlign; mLineNumber = 0; mColumn = 0; mFlags = 0; // default all flags to false except those that follow here... SetFlag(LL_ENDSINWHITESPACE, PR_TRUE); mPlacedFloats = 0; mTotalPlacedFrames = 0; mTopEdge = mBottomEdge = 0; // Instead of always pre-initializing the free-lists for frames and // spans, we do it on demand so that situations that only use a few // frames and spans won't waste alot of time in unneeded // initialization. mInitialFramesFreed = mInitialSpansFreed = 0; mFrameFreeList = nsnull; mSpanFreeList = nsnull; mCurrentSpan = mRootSpan = nsnull; mSpanDepth = 0; mCompatMode = mPresContext->CompatibilityMode(); } nsLineLayout::~nsLineLayout() { MOZ_COUNT_DTOR(nsLineLayout); NS_ASSERTION(nsnull == mRootSpan, "bad line-layout user"); // Free up all of the per-span-data items that were allocated on the heap PerSpanData* psd = mSpanFreeList; while (nsnull != psd) { PerSpanData* nextSpan = psd->mNextFreeSpan; if ((psd < &mSpanDataBuf[0]) || (psd >= &mSpanDataBuf[NS_LINELAYOUT_NUM_SPANS])) { delete psd; } psd = nextSpan; } // Free up all of the per-frame-data items that were allocated on the heap PerFrameData* pfd = mFrameFreeList; while (nsnull != pfd) { PerFrameData* nextFrame = pfd->mNext; if ((pfd < &mFrameDataBuf[0]) || (pfd >= &mFrameDataBuf[NS_LINELAYOUT_NUM_FRAMES])) { delete pfd; } pfd = nextFrame; } } // Find out if the frame has a non-null prev-in-flow, i.e., whether it // is a continuation. inline PRBool HasPrevInFlow(nsIFrame *aFrame) { nsIFrame *prevInFlow; aFrame->GetPrevInFlow(&prevInFlow); return prevInFlow != nsnull; } void nsLineLayout::BeginLineReflow(nscoord aX, nscoord aY, nscoord aWidth, nscoord aHeight, PRBool aImpactedByFloats, PRBool aIsTopOfPage) { NS_ASSERTION(nsnull == mRootSpan, "bad linelayout user"); #ifdef DEBUG if ((aWidth != NS_UNCONSTRAINEDSIZE) && CRAZY_WIDTH(aWidth)) { NS_NOTREACHED("bad width"); nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": Init: bad caller: width WAS %d(0x%x)\n", aWidth, aWidth); } if ((aHeight != NS_UNCONSTRAINEDSIZE) && CRAZY_HEIGHT(aHeight)) { NS_NOTREACHED("bad height"); nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": Init: bad caller: height WAS %d(0x%x)\n", aHeight, aHeight); } #endif #ifdef NOISY_REFLOW nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": BeginLineReflow: %d,%d,%d,%d impacted=%s %s\n", aX, aY, aWidth, aHeight, aImpactedByFloats?"true":"false", aIsTopOfPage ? "top-of-page" : ""); #endif #ifdef DEBUG mSpansAllocated = mSpansFreed = mFramesAllocated = mFramesFreed = 0; #endif mColumn = 0; SetFlag(LL_ENDSINWHITESPACE, PR_TRUE); SetFlag(LL_UNDERSTANDSNWHITESPACE, PR_FALSE); SetFlag(LL_FIRSTLETTERSTYLEOK, PR_FALSE); SetFlag(LL_ISTOPOFPAGE, aIsTopOfPage); SetFlag(LL_UPDATEDBAND, PR_FALSE); mPlacedFloats = 0; SetFlag(LL_IMPACTEDBYFLOATS, aImpactedByFloats); mTotalPlacedFrames = 0; SetFlag(LL_CANPLACEFLOAT, PR_TRUE); SetFlag(LL_LINEENDSINBR, PR_FALSE); mSpanDepth = 0; mMaxTopBoxHeight = mMaxBottomBoxHeight = 0; ForgetWordFrames(); PerSpanData* psd; NewPerSpanData(&psd); mCurrentSpan = mRootSpan = psd; psd->mReflowState = mBlockReflowState; psd->mLeftEdge = aX; psd->mX = aX; if (NS_UNCONSTRAINEDSIZE == aWidth) { psd->mRightEdge = NS_UNCONSTRAINEDSIZE; } else { psd->mRightEdge = aX + aWidth; } mTopEdge = aY; if (NS_UNCONSTRAINEDSIZE == aHeight) { mBottomEdge = NS_UNCONSTRAINEDSIZE; } else { mBottomEdge = aY + aHeight; } switch (mStyleText->mWhiteSpace) { case NS_STYLE_WHITESPACE_PRE: case NS_STYLE_WHITESPACE_NOWRAP: psd->mNoWrap = PR_TRUE; break; default: psd->mNoWrap = PR_FALSE; break; } psd->mDirection = mBlockReflowState->mStyleVisibility->mDirection; psd->mChangedFrameDirection = PR_FALSE; // If this is the first line of a block then see if the text-indent // property amounts to anything. if (0 == mLineNumber && !HasPrevInFlow(mBlockReflowState->frame)) { nscoord indent = 0; nsStyleUnit unit = mStyleText->mTextIndent.GetUnit(); if (eStyleUnit_Coord == unit) { indent = mStyleText->mTextIndent.GetCoordValue(); } else if (eStyleUnit_Percent == unit) { nscoord width = nsHTMLReflowState::GetContainingBlockContentWidth(mBlockReflowState->parentReflowState); if ((0 != width) && (NS_UNCONSTRAINEDSIZE != width)) { indent = nscoord(mStyleText->mTextIndent.GetPercentValue() * width); } } mTextIndent = indent; if (NS_STYLE_DIRECTION_RTL == psd->mDirection) { if (NS_UNCONSTRAINEDSIZE != psd->mRightEdge) { psd->mRightEdge -= indent; } } else { psd->mX += indent; } } } void nsLineLayout::EndLineReflow() { #ifdef NOISY_REFLOW nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": EndLineReflow: width=%d\n", mRootSpan->mX - mRootSpan->mLeftEdge); #endif FreeSpan(mRootSpan); mCurrentSpan = mRootSpan = nsnull; NS_ASSERTION(mSpansAllocated == mSpansFreed, "leak"); NS_ASSERTION(mFramesAllocated == mFramesFreed, "leak"); #if 0 static PRInt32 maxSpansAllocated = NS_LINELAYOUT_NUM_SPANS; static PRInt32 maxFramesAllocated = NS_LINELAYOUT_NUM_FRAMES; if (mSpansAllocated > maxSpansAllocated) { printf("XXX: saw a line with %d spans\n", mSpansAllocated); maxSpansAllocated = mSpansAllocated; } if (mFramesAllocated > maxFramesAllocated) { printf("XXX: saw a line with %d frames\n", mFramesAllocated); maxFramesAllocated = mFramesAllocated; } #endif } // XXX swtich to a single mAvailLineWidth that we adjust as each frame // on the line is placed. Each span can still have a per-span mX that // tracks where a child frame is going in its span; they don't need a // per-span mLeftEdge? void nsLineLayout::UpdateBand(nscoord aX, nscoord aY, nscoord aWidth, nscoord aHeight, PRBool aPlacedLeftFloat, nsIFrame* aFloatFrame) { #ifdef REALLY_NOISY_REFLOW printf("nsLL::UpdateBand %d, %d, %d, %d, frame=%p placedLeft=%s\n will set mImpacted to PR_TRUE\n", aX, aY, aWidth, aHeight, aFloatFrame, aPlacedLeftFloat?"true":"false"); #endif PerSpanData* psd = mRootSpan; NS_PRECONDITION(psd->mX == psd->mLeftEdge, "update-band called late"); #ifdef DEBUG if ((aWidth != NS_UNCONSTRAINEDSIZE) && CRAZY_WIDTH(aWidth)) { nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": UpdateBand: bad caller: width WAS %d(0x%x)\n", aWidth, aWidth); } if ((aHeight != NS_UNCONSTRAINEDSIZE) && CRAZY_HEIGHT(aHeight)) { nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": UpdateBand: bad caller: height WAS %d(0x%x)\n", aHeight, aHeight); } #endif // Compute the difference between last times width and the new width nscoord deltaWidth = 0; if (NS_UNCONSTRAINEDSIZE != psd->mRightEdge) { NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aWidth, "switched constraints"); nscoord oldWidth = psd->mRightEdge - psd->mLeftEdge; deltaWidth = aWidth - oldWidth; } #ifdef NOISY_REFLOW nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": UpdateBand: %d,%d,%d,%d deltaWidth=%d %s float\n", aX, aY, aWidth, aHeight, deltaWidth, aPlacedLeftFloat ? "left" : "right"); #endif psd->mLeftEdge = aX; psd->mX = aX; if (NS_UNCONSTRAINEDSIZE == aWidth) { psd->mRightEdge = NS_UNCONSTRAINEDSIZE; } else { psd->mRightEdge = aX + aWidth; } mTopEdge = aY; if (NS_UNCONSTRAINEDSIZE == aHeight) { mBottomEdge = NS_UNCONSTRAINEDSIZE; } else { mBottomEdge = aY + aHeight; } SetFlag(LL_UPDATEDBAND, PR_TRUE); mPlacedFloats |= (aPlacedLeftFloat ? PLACED_LEFT : PLACED_RIGHT); SetFlag(LL_IMPACTEDBYFLOATS, PR_TRUE); SetFlag(LL_LASTFLOATWASLETTERFRAME, nsLayoutAtoms::letterFrame == aFloatFrame->GetType()); // Now update all of the open spans... mRootSpan->mContainsFloat = PR_TRUE; // make sure mRootSpan gets updated too psd = mCurrentSpan; while (psd != mRootSpan) { NS_ASSERTION(nsnull != psd, "null ptr"); if (nsnull == psd) { break; } NS_ASSERTION(psd->mX == psd->mLeftEdge, "bad float placement"); if (NS_UNCONSTRAINEDSIZE == aWidth) { psd->mRightEdge = NS_UNCONSTRAINEDSIZE; } else { psd->mRightEdge += deltaWidth; } psd->mContainsFloat = PR_TRUE; #ifdef NOISY_REFLOW printf(" span %p: oldRightEdge=%d newRightEdge=%d\n", psd, psd->mRightEdge - deltaWidth, psd->mRightEdge); #endif psd = psd->mParent; } } // Note: Only adjust the outermost frames (the ones that are direct // children of the block), not the ones in the child spans. The reason // is simple: the frames in the spans have coordinates local to their // parent therefore they are moved when their parent span is moved. void nsLineLayout::UpdateFrames() { NS_ASSERTION(nsnull != mRootSpan, "UpdateFrames with no active spans"); PerSpanData* psd = mRootSpan; if (NS_STYLE_DIRECTION_LTR == psd->mDirection) { if (PLACED_LEFT & mPlacedFloats) { PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { pfd->mBounds.x = psd->mX; pfd = pfd->mNext; } } } else if (PLACED_RIGHT & mPlacedFloats) { // XXX handle DIR=right-to-left } } nsresult nsLineLayout::NewPerSpanData(PerSpanData** aResult) { PerSpanData* psd = mSpanFreeList; if (nsnull == psd) { if (mInitialSpansFreed < NS_LINELAYOUT_NUM_SPANS) { // use one of the ones defined in our struct... psd = &mSpanDataBuf[mInitialSpansFreed++]; } else { psd = new PerSpanData; if (nsnull == psd) { return NS_ERROR_OUT_OF_MEMORY; } } } else { mSpanFreeList = psd->mNextFreeSpan; } psd->mParent = nsnull; psd->mFrame = nsnull; psd->mFirstFrame = nsnull; psd->mLastFrame = nsnull; psd->mContainsFloat = PR_FALSE; psd->mZeroEffectiveSpanBox = PR_FALSE; #ifdef DEBUG mSpansAllocated++; #endif *aResult = psd; return NS_OK; } nsresult nsLineLayout::BeginSpan(nsIFrame* aFrame, const nsHTMLReflowState* aSpanReflowState, nscoord aLeftEdge, nscoord aRightEdge) { #ifdef NOISY_REFLOW nsFrame::IndentBy(stdout, mSpanDepth+1); nsFrame::ListTag(stdout, aFrame); printf(": BeginSpan leftEdge=%d rightEdge=%d\n", aLeftEdge, aRightEdge); #endif PerSpanData* psd; nsresult rv = NewPerSpanData(&psd); if (NS_SUCCEEDED(rv)) { // Link up span frame's pfd to point to its child span data PerFrameData* pfd = mCurrentSpan->mLastFrame; NS_ASSERTION(pfd->mFrame == aFrame, "huh?"); pfd->mSpan = psd; // Init new span psd->mFrame = pfd; psd->mParent = mCurrentSpan; psd->mReflowState = aSpanReflowState; psd->mLeftEdge = aLeftEdge; psd->mX = aLeftEdge; psd->mRightEdge = aRightEdge; const nsStyleText* styleText = aSpanReflowState->frame->GetStyleText(); switch (styleText->mWhiteSpace) { case NS_STYLE_WHITESPACE_PRE: case NS_STYLE_WHITESPACE_NOWRAP: psd->mNoWrap = PR_TRUE; break; default: psd->mNoWrap = PR_FALSE; break; } psd->mDirection = aSpanReflowState->mStyleVisibility->mDirection; psd->mChangedFrameDirection = PR_FALSE; // Switch to new span mCurrentSpan = psd; mSpanDepth++; } return rv; } void nsLineLayout::EndSpan(nsIFrame* aFrame, nsSize& aSizeResult, nscoord* aMaxElementWidth) { NS_ASSERTION(mSpanDepth > 0, "end-span without begin-span"); #ifdef NOISY_REFLOW nsFrame::IndentBy(stdout, mSpanDepth); nsFrame::ListTag(stdout, aFrame); printf(": EndSpan width=%d\n", mCurrentSpan->mX - mCurrentSpan->mLeftEdge); #endif PerSpanData* psd = mCurrentSpan; nscoord width = 0; nscoord maxHeight = 0; nscoord maxElementWidth = 0; if (nsnull != psd->mLastFrame) { width = psd->mX - psd->mLeftEdge; PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { /* there's one oddball case we need to guard against * if we're reflowed with NS_UNCONSTRAINEDSIZE * then the last frame will not contribute to the max element size height * if it is a text frame that only contains whitespace */ if (NS_UNCONSTRAINEDSIZE != psd->mRightEdge || // it's not an unconstrained reflow pfd->mNext || // or it's not the last frame in the span !pfd->GetFlag(PFD_ISTEXTFRAME) || // or it's not a text frame pfd->GetFlag(PFD_ISNONWHITESPACETEXTFRAME) // or it contains something other than whitespace ) { if (pfd->mBounds.height > maxHeight) maxHeight = pfd->mBounds.height; // Compute max-element-width if necessary if (aMaxElementWidth) { nscoord mw = pfd->mMaxElementWidth + pfd->mMargin.left + pfd->mMargin.right; if (maxElementWidth < mw) { maxElementWidth = mw; } } } pfd = pfd->mNext; } } aSizeResult.width = width; aSizeResult.height = maxHeight; if (aMaxElementWidth) { if (psd->mNoWrap) { // When we have a non-breakable span, it's max-element-width // width is its entire width. *aMaxElementWidth = width; } else { *aMaxElementWidth = maxElementWidth; } } mSpanDepth--; mCurrentSpan->mReflowState = nsnull; // no longer valid so null it out! mCurrentSpan = mCurrentSpan->mParent; } PRInt32 nsLineLayout::GetCurrentSpanCount() const { NS_ASSERTION(mCurrentSpan == mRootSpan, "bad linelayout user"); PRInt32 count = 0; PerFrameData* pfd = mRootSpan->mFirstFrame; while (nsnull != pfd) { count++; pfd = pfd->mNext; } return count; } void nsLineLayout::SplitLineTo(PRInt32 aNewCount) { NS_ASSERTION(mCurrentSpan == mRootSpan, "bad linelayout user"); #ifdef REALLY_NOISY_PUSHING printf("SplitLineTo %d (current count=%d); before:\n", aNewCount, GetCurrentSpanCount()); DumpPerSpanData(mRootSpan, 1); #endif PerSpanData* psd = mRootSpan; PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { if (--aNewCount == 0) { // Truncate list at pfd (we keep pfd, but anything following is freed) PerFrameData* next = pfd->mNext; pfd->mNext = nsnull; psd->mLastFrame = pfd; // Now release all of the frames following pfd pfd = next; while (nsnull != pfd) { next = pfd->mNext; pfd->mNext = mFrameFreeList; mFrameFreeList = pfd; #ifdef DEBUG mFramesFreed++; #endif if (nsnull != pfd->mSpan) { FreeSpan(pfd->mSpan); } pfd = next; } break; } pfd = pfd->mNext; } #ifdef NOISY_PUSHING printf("SplitLineTo %d (current count=%d); after:\n", aNewCount, GetCurrentSpanCount()); DumpPerSpanData(mRootSpan, 1); #endif } void nsLineLayout::PushFrame(nsIFrame* aFrame) { PerSpanData* psd = mCurrentSpan; NS_ASSERTION(psd->mLastFrame->mFrame == aFrame, "pushing non-last frame"); #ifdef REALLY_NOISY_PUSHING nsFrame::IndentBy(stdout, mSpanDepth); printf("PushFrame %p, before:\n", psd); DumpPerSpanData(psd, 1); #endif // Take the last frame off of the span's frame list PerFrameData* pfd = psd->mLastFrame; if (pfd == psd->mFirstFrame) { // We are pushing away the only frame...empty the list psd->mFirstFrame = nsnull; psd->mLastFrame = nsnull; } else { PerFrameData* prevFrame = pfd->mPrev; prevFrame->mNext = nsnull; psd->mLastFrame = prevFrame; } // Now free it, and if it has a span, free that too pfd->mNext = mFrameFreeList; mFrameFreeList = pfd; #ifdef DEBUG mFramesFreed++; #endif if (nsnull != pfd->mSpan) { FreeSpan(pfd->mSpan); } #ifdef NOISY_PUSHING nsFrame::IndentBy(stdout, mSpanDepth); printf("PushFrame: %p after:\n", psd); DumpPerSpanData(psd, 1); #endif } void nsLineLayout::FreeSpan(PerSpanData* psd) { // Free its frames PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { if (nsnull != pfd->mSpan) { FreeSpan(pfd->mSpan); } PerFrameData* next = pfd->mNext; pfd->mNext = mFrameFreeList; mFrameFreeList = pfd; #ifdef DEBUG mFramesFreed++; #endif pfd = next; } // Now put the span on the free list since its free too psd->mNextFreeSpan = mSpanFreeList; mSpanFreeList = psd; #ifdef DEBUG mSpansFreed++; #endif } PRBool nsLineLayout::IsZeroHeight() { PerSpanData* psd = mCurrentSpan; PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { if (0 != pfd->mBounds.height) { return PR_FALSE; } pfd = pfd->mNext; } return PR_TRUE; } nsresult nsLineLayout::NewPerFrameData(PerFrameData** aResult) { PerFrameData* pfd = mFrameFreeList; if (nsnull == pfd) { if (mInitialFramesFreed < NS_LINELAYOUT_NUM_FRAMES) { // use one of the ones defined in our struct... pfd = &mFrameDataBuf[mInitialFramesFreed++]; } else { pfd = new PerFrameData; if (nsnull == pfd) { return NS_ERROR_OUT_OF_MEMORY; } } } else { mFrameFreeList = pfd->mNext; } pfd->mSpan = nsnull; pfd->mNext = nsnull; pfd->mPrev = nsnull; pfd->mFrame = nsnull; pfd->mFlags = 0; // all flags default to false #ifdef DEBUG pfd->mVerticalAlign = 0xFF; mFramesAllocated++; #endif *aResult = pfd; return NS_OK; } PRBool nsLineLayout::CanPlaceFloatNow() const { return GetFlag(LL_CANPLACEFLOAT); } PRBool nsLineLayout::LineIsBreakable() const { if ((0 != mTotalPlacedFrames) || GetFlag(LL_IMPACTEDBYFLOATS)) { return PR_TRUE; } return PR_FALSE; } nsresult nsLineLayout::ReflowFrame(nsIFrame* aFrame, nsReflowStatus& aReflowStatus, nsHTMLReflowMetrics* aMetrics, PRBool& aPushedFrame) { // Initialize OUT parameter aPushedFrame = PR_FALSE; PerFrameData* pfd; nsresult rv = NewPerFrameData(&pfd); if (NS_FAILED(rv)) { return rv; } PerSpanData* psd = mCurrentSpan; psd->AppendFrame(pfd); #ifdef REALLY_NOISY_REFLOW nsFrame::IndentBy(stdout, mSpanDepth); printf("%p: Begin ReflowFrame pfd=%p ", psd, pfd); nsFrame::ListTag(stdout, aFrame); printf("\n"); #endif // Compute the available size for the frame. This available width // includes room for the side margins. nsSize availSize; if (NS_UNCONSTRAINEDSIZE == psd->mRightEdge) { availSize.width = NS_UNCONSTRAINEDSIZE; } else { availSize.width = psd->mRightEdge - psd->mX; if (psd->mNoWrap) { // Make up a width to use for reflowing into. XXX what value to // use? for tables, we want to limit it; for other elements // (e.g. text) it can be unlimited... availSize.width = psd->mReflowState->availableWidth; } } if (NS_UNCONSTRAINEDSIZE == mBottomEdge) { availSize.height = NS_UNCONSTRAINEDSIZE; } else { availSize.height = mBottomEdge - mTopEdge; } // Get reflow reason set correctly. It's possible that a child was // created and then it was decided that it could not be reflowed // (for example, a block frame that isn't at the start of a // line). In this case the reason will be wrong so we need to check // the frame state. const nsHTMLReflowState* rs = psd->mReflowState; nsReflowReason reason = eReflowReason_Resize; if (NS_FRAME_FIRST_REFLOW & aFrame->GetStateBits()) { reason = eReflowReason_Initial; } else if (rs->reason == eReflowReason_Incremental) { // XXX // XXXwaterson (above) previously used mBlockReflowState rather // than psd->mReflowState. // If the frame we're about to reflow is on the reflow path, then // propagate the reflow as `incremental' so it unwinds correctly // to the target frames below us. PRBool frameIsOnReflowPath = rs->path->HasChild(aFrame); if (frameIsOnReflowPath) reason = eReflowReason_Incremental; // But...if the incremental reflow command is a StyleChanged // reflow and its target is the current span, change the reason // to `style change', so that it propagates through the entire // subtree. nsHTMLReflowCommand* rc = rs->path->mReflowCommand; if (rc) { nsReflowType type; rc->GetType(type); if (type == eReflowType_StyleChanged) { nsIFrame* parentFrame = psd->mFrame ? psd->mFrame->mFrame : mBlockReflowState->frame; nsIFrame* target; rc->GetTarget(target); if (target == parentFrame) { reason = eReflowReason_StyleChange; } } else if (type == eReflowType_ReflowDirty && (aFrame->GetStateBits() & NS_FRAME_IS_DIRTY) && !frameIsOnReflowPath) { reason = eReflowReason_Dirty; } } } else if (rs->reason == eReflowReason_StyleChange) { reason = eReflowReason_StyleChange; } else if (rs->reason == eReflowReason_Dirty) { if (aFrame->GetStateBits() & NS_FRAME_IS_DIRTY) reason = eReflowReason_Dirty; } // Setup reflow state for reflowing the frame nsHTMLReflowState reflowState(mPresContext, *psd->mReflowState, aFrame, availSize, reason); reflowState.mLineLayout = this; reflowState.mFlags.mIsTopOfPage = GetFlag(LL_ISTOPOFPAGE); SetFlag(LL_UNDERSTANDSNWHITESPACE, PR_FALSE); mTextJustificationNumSpaces = 0; mTextJustificationNumLetters = 0; // Stash copies of some of the computed state away for later // (vertical alignment, for example) pfd->mFrame = aFrame; pfd->mMargin = reflowState.mComputedMargin; pfd->mBorderPadding = reflowState.mComputedBorderPadding; pfd->mFrameType = reflowState.mFrameType; pfd->SetFlag(PFD_RELATIVEPOS, (reflowState.mStyleDisplay->mPosition == NS_STYLE_POSITION_RELATIVE)); if (pfd->GetFlag(PFD_RELATIVEPOS)) { pfd->mOffsets = reflowState.mComputedOffsets; } // NOTE: While the x coordinate remains relative to the parent span, // the y coordinate is fixed at the top edge for the line. During // VerticalAlignFrames we will repair this so that the y coordinate // is properly set and relative to the appropriate span. pfd->mBounds.x = psd->mX; pfd->mBounds.y = mTopEdge; // We want to guarantee that we always make progress when // formatting. Therefore, if the object being placed on the line is // too big for the line, but it is the only thing on the line // (including counting floats) then we go ahead and place it // anyway. Its also true that if the object is a part of a larger // object (a multiple frame word) then we will place it on the line // too. // // Capture this state *before* we reflow the frame in case it clears // the state out. We need to know how to treat the current frame // when breaking. PRBool notSafeToBreak = CanPlaceFloatNow() || InWord(); // Apply start margins (as appropriate) to the frame computing the // new starting x,y coordinates for the frame. ApplyStartMargin(pfd, reflowState); // Let frame know that are reflowing it. Note that we don't bother // positioning the frame yet, because we're probably going to end up // moving it when we do the vertical alignment nscoord x = pfd->mBounds.x; nscoord y = pfd->mBounds.y; aFrame->WillReflow(mPresContext); // Adjust spacemanager coordinate system for the frame. The // spacemanager coordinates are inside the current spans // border+padding, but the x/y coordinates are not (recall that // frame coordinates are relative to the parents origin and that the // parents border/padding is inside the parent // frame. Therefore we have to subtract out the parents // border+padding before translating. nsHTMLReflowMetrics metrics(mComputeMaxElementWidth); #ifdef DEBUG metrics.width = nscoord(0xdeadbeef); metrics.height = nscoord(0xdeadbeef); metrics.ascent = nscoord(0xdeadbeef); metrics.descent = nscoord(0xdeadbeef); if (mComputeMaxElementWidth) { metrics.mMaxElementWidth = nscoord(0xdeadbeef); } #endif nscoord tx = x - psd->mReflowState->mComputedBorderPadding.left; nscoord ty = y - psd->mReflowState->mComputedBorderPadding.top; mSpaceManager->Translate(tx, ty); #ifdef IBMBIDI PRBool bidiEnabled; mPresContext->GetBidiEnabled(&bidiEnabled); PRInt32 start, end; if (bidiEnabled) { if (aFrame->GetStateBits() & NS_FRAME_IS_BIDI) { aFrame->GetOffsets(start, end); } } #endif // IBMBIDI nsIAtom* frameType = aFrame->GetType(); rv = aFrame->Reflow(mPresContext, metrics, reflowState, aReflowStatus); if (NS_FAILED(rv)) { NS_WARNING( "Reflow of frame failed in nsLineLayout" ); return rv; } // SEC: added this next block for bug 45152 // text frames don't know how to invalidate themselves on initial reflow. Do it for them here. // This only shows up in textareas, so do a quick check to see if we're inside one if (eReflowReason_Initial == reflowState.reason) { if (nsLayoutAtoms::textFrame == frameType) { // aFrame is a text frame, see if it's inside a text control // although this is a bit slow, the frame tree shouldn't be too deep, it's only called // for the text frame's initial reflow (once in the text frame's lifetime) // and we don't make any expensive calls. // Doing it this way shields us from knowing anything about the frame structure inside a text control. PRBool inTextControl = PR_FALSE; for (nsIFrame *parentFrame = aFrame->GetParent(); parentFrame; parentFrame = parentFrame->GetParent()) { if (nsLayoutAtoms::textInputFrame == parentFrame->GetType()) { inTextControl = PR_TRUE; // found it break; } } if (inTextControl) { nsLineBox *currentLine=nsnull; // use localResult because a failure here should not be propagated to my caller nsresult localResult = nsBlockFrame::GetCurrentLine(mBlockRS, ¤tLine); if (NS_SUCCEEDED(localResult) && currentLine) { currentLine->SetForceInvalidate(PR_TRUE); } } } } // end fix for bug 45152 pfd->mJustificationNumSpaces = mTextJustificationNumSpaces; pfd->mJustificationNumLetters = mTextJustificationNumLetters; // XXX See if the frame is a placeholderFrame and if it is process // the float. if (frameType) { if (nsLayoutAtoms::placeholderFrame == frameType) { pfd->SetFlag(PFD_ISPLACEHOLDERFRAME, PR_TRUE); nsIFrame* outOfFlowFrame = ((nsPlaceholderFrame*)aFrame)->GetOutOfFlowFrame(); if (outOfFlowFrame) { // Make sure it's floated and not absolutely positioned const nsStyleDisplay* display = outOfFlowFrame->GetStyleDisplay(); if (!display->IsAbsolutelyPositioned()) { if (eReflowReason_Incremental == reason) { InitFloat((nsPlaceholderFrame*)aFrame, aReflowStatus); } else { AddFloat((nsPlaceholderFrame*)aFrame, aReflowStatus); } if (outOfFlowFrame->GetType() == nsLayoutAtoms::letterFrame) { SetFlag(LL_FIRSTLETTERSTYLEOK, PR_FALSE); // An incomplete reflow status means we should split the // float if the height is constrained (bug 145305). We // never split floating first letters. if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus)) aReflowStatus = NS_FRAME_COMPLETE; } } } } else if (nsLayoutAtoms::textFrame == frameType) { // Note non-empty text-frames for inline frame compatability hackery pfd->SetFlag(PFD_ISTEXTFRAME, PR_TRUE); // XXX An empty text frame at the end of the line seems not // to have zero width. if (metrics.width) { pfd->SetFlag(PFD_ISNONEMPTYTEXTFRAME, PR_TRUE); nsIContent* content = pfd->mFrame->GetContent(); if (content) { nsresult result; nsCOMPtr textContent = do_QueryInterface(content, &result); if ((NS_SUCCEEDED(result)) && textContent) { PRBool isWhitespace; result = textContent->IsOnlyWhitespace(&isWhitespace); if (NS_SUCCEEDED(result)) { pfd->SetFlag(PFD_ISNONWHITESPACETEXTFRAME, !isWhitespace); } // fix for bug 40882 #ifdef IBMBIDI const nsTextFragment* frag; textContent->GetText(&frag); if (frag && frag->Is2b() ) { //PRBool isVisual; //mPresContext->IsVisualMode(isVisual); PRUnichar ch = /*(isVisual) ? *(frag->Get2b() + frag->GetLength() - 1) :*/ *frag->Get2b(); if (IS_BIDI_DIACRITIC(ch) ) { aFrame->SetBidiProperty(mPresContext, nsLayoutAtoms::endsInDiacritic, (void*)ch); } } #endif // IBMBIDI } } } } else if (nsLayoutAtoms::letterFrame==frameType) { pfd->SetFlag(PFD_ISLETTERFRAME, PR_TRUE); } } mSpaceManager->Translate(-tx, -ty); NS_ASSERTION(metrics.width>=0, "bad width"); NS_ASSERTION(metrics.height>=0,"bad height"); if (metrics.width<0) metrics.width=0; if (metrics.height<0) metrics.height=0; #ifdef DEBUG // Note: break-before means ignore the reflow metrics since the // frame will be reflowed another time. if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) { if (CRAZY_WIDTH(metrics.width) || CRAZY_HEIGHT(metrics.height)) { printf("nsLineLayout: "); nsFrame::ListTag(stdout, aFrame); printf(" metrics=%d,%d!\n", metrics.width, metrics.height); } if (mComputeMaxElementWidth && (nscoord(0xdeadbeef) == metrics.mMaxElementWidth)) { printf("nsLineLayout: "); nsFrame::ListTag(stdout, aFrame); printf(" didn't set max-element-width!\n"); } #ifdef REALLY_NOISY_MAX_ELEMENT_SIZE // Note: there are common reflow situations where this *correctly* // occurs; so only enable this debug noise when you really need to // analyze in detail. if (mComputeMaxElementWidth && (metrics.mMaxElementWidth > metrics.width)) { printf("nsLineLayout: "); nsFrame::ListTag(stdout, aFrame); printf(": WARNING: maxElementWidth=%d > metrics=%d\n", metrics.mMaxElementWidth, metrics.width); } #endif if ((metrics.width == nscoord(0xdeadbeef)) || (metrics.height == nscoord(0xdeadbeef)) || (metrics.ascent == nscoord(0xdeadbeef)) || (metrics.descent == nscoord(0xdeadbeef))) { printf("nsLineLayout: "); nsFrame::ListTag(stdout, aFrame); printf(" didn't set whad %d,%d,%d,%d!\n", metrics.width, metrics.height, metrics.ascent, metrics.descent); } } #endif #ifdef DEBUG if (nsBlockFrame::gNoisyMaxElementWidth) { nsFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent); if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) { if (mComputeMaxElementWidth) { printf(" "); nsFrame::ListTag(stdout, aFrame); printf(": maxElementWidth=%d wh=%d,%d,\n", metrics.mMaxElementWidth, metrics.width, metrics.height); } } } #endif if (NS_FRAME_OUTSIDE_CHILDREN & aFrame->GetStateBits()) { pfd->mCombinedArea = metrics.mOverflowArea; } else { pfd->mCombinedArea.x = 0; pfd->mCombinedArea.y = 0; pfd->mCombinedArea.width = metrics.width; pfd->mCombinedArea.height = metrics.height; } pfd->mBounds.width = metrics.width; pfd->mBounds.height = metrics.height; if (mComputeMaxElementWidth) { pfd->mMaxElementWidth = metrics.mMaxElementWidth; } // Size the frame, but |RelativePositionFrames| will size the view. aFrame->SetSize(nsSize(metrics.width, metrics.height)); // Tell the frame that we're done reflowing it aFrame->DidReflow(mPresContext, &reflowState, NS_FRAME_REFLOW_FINISHED); if (aMetrics) { *aMetrics = metrics; } if (!NS_INLINE_IS_BREAK_BEFORE(aReflowStatus)) { // If frame is complete and has a next-in-flow, we need to delete // them now. Do not do this when a break-before is signaled because // the frame is going to get reflowed again (and may end up wanting // a next-in-flow where it ends up). if (NS_FRAME_IS_COMPLETE(aReflowStatus)) { nsIFrame* kidNextInFlow; aFrame->GetNextInFlow(&kidNextInFlow); if (nsnull != kidNextInFlow) { // Remove all of the childs next-in-flows. Make sure that we ask // the right parent to do the removal (it's possible that the // parent is not this because we are executing pullup code) nsHTMLContainerFrame* parent = NS_STATIC_CAST(nsHTMLContainerFrame*, kidNextInFlow->GetParent()); parent->DeleteNextInFlowChild(mPresContext, kidNextInFlow); } } // See if we can place the frame. If we can't fit it, then we // return now. if (CanPlaceFrame(pfd, reflowState, notSafeToBreak, metrics, aReflowStatus)) { // Place the frame, updating aBounds with the final size and // location. Then apply the bottom+right margins (as // appropriate) to the frame. PlaceFrame(pfd, metrics); PerSpanData* span = pfd->mSpan; if (span) { // The frame we just finished reflowing is an inline // container. It needs its child frames vertically aligned, // so do most of it now. VerticalAlignFrames(span); } } else { PushFrame(aFrame); aPushedFrame = PR_TRUE; } } else { PushFrame(aFrame); } #ifdef REALLY_NOISY_REFLOW nsFrame::IndentBy(stdout, mSpanDepth); printf("End ReflowFrame "); nsFrame::ListTag(stdout, aFrame); printf(" status=%x\n", aReflowStatus); #endif if (aFrame->GetStateBits() & NS_FRAME_IS_BIDI) { // Since aReflowStatus may change, check it at the end if (NS_INLINE_IS_BREAK_BEFORE(aReflowStatus) ) { aFrame->AdjustOffsetsForBidi(start, end); } else if (!NS_FRAME_IS_COMPLETE(aReflowStatus) ) { PRInt32 newEnd; aFrame->GetOffsets(start, newEnd); if (newEnd != end) { nsIFrame* nextInFlow; aFrame->GetNextInFlow(&nextInFlow); if (nextInFlow) { nextInFlow->GetOffsets(start, end); nextInFlow->AdjustOffsetsForBidi(newEnd, end); } // nextInFlow } // newEnd != end } // !NS_FRAME_IS_COMPLETE(aReflowStatus) } // isBidiFrame return rv; } void nsLineLayout::ApplyStartMargin(PerFrameData* pfd, nsHTMLReflowState& aReflowState) { NS_ASSERTION(aReflowState.mStyleDisplay->mFloats == NS_STYLE_FLOAT_NONE, "How'd we get a floated inline frame? " "The frame ctor should've dealt with this."); // XXXwaterson probably not the right way to get this; e.g., embeddings, etc. PRBool ltr = (NS_STYLE_DIRECTION_LTR == aReflowState.mStyleVisibility->mDirection); // Only apply start-margin on the first-in flow for inline frames if (HasPrevInFlow(pfd->mFrame)) { // Zero this out so that when we compute the max-element-width of // the frame we will properly avoid adding in the starting margin. if (ltr) pfd->mMargin.left = 0; else pfd->mMargin.right = 0; } if (NS_UNCONSTRAINEDSIZE != aReflowState.availableWidth){ // Adjust available width to account for the left margin. The // right margin will be accounted for when we finish flowing the // frame. aReflowState.availableWidth -= ltr ? pfd->mMargin.left : pfd->mMargin.right; } if (ltr) pfd->mBounds.x += pfd->mMargin.left; } /** * See if the frame can be placed now that we know it's desired size. * We can always place the frame if the line is empty. Note that we * know that the reflow-status is not a break-before because if it was * ReflowFrame above would have returned false, preventing this method * from being called. The logic in this method assumes that. * * Note that there is no check against the Y coordinate because we * assume that the caller will take care of that. */ PRBool nsLineLayout::CanPlaceFrame(PerFrameData* pfd, const nsHTMLReflowState& aReflowState, PRBool aNotSafeToBreak, nsHTMLReflowMetrics& aMetrics, nsReflowStatus& aStatus) { NS_PRECONDITION(pfd && pfd->mFrame, "bad args, null pointers for frame data"); // Compute right margin to use if (0 != pfd->mBounds.width) { NS_ASSERTION(aReflowState.mStyleDisplay->mFloats == NS_STYLE_FLOAT_NONE, "How'd we get a floated inline frame? " "The frame ctor should've dealt with this."); // XXXwaterson this is probably not exactly right; e.g., embeddings, etc. PRBool ltr = (NS_STYLE_DIRECTION_LTR == aReflowState.mStyleVisibility->mDirection); if (NS_FRAME_IS_NOT_COMPLETE(aStatus)) { // Only apply end margin for the last-in-flow. Zero this out so // that when we compute the max-element-width of the frame we // will properly avoid adding in the end margin. if (ltr) pfd->mMargin.right = 0; else pfd->mMargin.left = 0; } } else { // Don't apply margin to empty frames. pfd->mMargin.left = pfd->mMargin.right = 0; } PerSpanData* psd = mCurrentSpan; if (psd->mNoWrap) { // When wrapping is off, everything fits. return PR_TRUE; } #ifdef NOISY_CAN_PLACE_FRAME if (nsnull != psd->mFrame) { nsFrame::ListTag(stdout, psd->mFrame->mFrame); } else { nsFrame::ListTag(stdout, mBlockReflowState->frame); } printf(": aNotSafeToBreak=%s frame=", aNotSafeToBreak ? "true" : "false"); nsFrame::ListTag(stdout, pfd->mFrame); printf(" frameWidth=%d\n", pfd->mBounds.XMost() + rightMargin - psd->mX); #endif // Set outside to PR_TRUE if the result of the reflow leads to the // frame sticking outside of our available area. PRBool outside = pfd->mBounds.XMost() + pfd->mMargin.right > psd->mRightEdge; if (!outside) { // If it fits, it fits #ifdef NOISY_CAN_PLACE_FRAME printf(" ==> inside\n"); #endif return PR_TRUE; } // When it doesn't fit, check for a few special conditions where we // allow it to fit anyway. if (0 == pfd->mMargin.left + pfd->mBounds.width + pfd->mMargin.right) { // Empty frames always fit right where they are #ifdef NOISY_CAN_PLACE_FRAME printf(" ==> empty frame fits\n"); #endif return PR_TRUE; } #ifdef FIX_BUG_50257 // another special case: always place a BR if (nsLayoutAtoms::brFrame == pfd->mFrame->GetType()) { #ifdef NOISY_CAN_PLACE_FRAME printf(" ==> BR frame fits\n"); #endif return PR_TRUE; } #endif if (aNotSafeToBreak) { // There are no frames on the line or we are in the first word on // the line. If the line isn't impacted by a float then the // current frame fits. if (!GetFlag(LL_IMPACTEDBYFLOATS)) { #ifdef NOISY_CAN_PLACE_FRAME printf(" ==> not-safe and not-impacted fits: "); while (nsnull != psd) { printf(" ", psd, psd->mX, psd->mLeftEdge); psd = psd->mParent; } printf("\n"); #endif return PR_TRUE; } else if (GetFlag(LL_LASTFLOATWASLETTERFRAME)) { // Another special case: see if the float is a letter // frame. If it is, then allow the frame next to it to fit. if (pfd->GetFlag(PFD_ISNONEMPTYTEXTFRAME)) { // This must be the first piece of non-empty text (because // aNotSafeToBreak is true) or its a piece of text that is // part of a larger word. pfd->SetFlag(PFD_ISSTICKY, PR_TRUE); } else if (pfd->mSpan) { PerFrameData* pf = pfd->mSpan->mFirstFrame; while (pf) { if (pf->GetFlag(PFD_ISSTICKY)) { // If one of the spans children was sticky then the span // itself is sticky. pfd->SetFlag(PFD_ISSTICKY, PR_TRUE); } pf = pf->mNext; } } if (pfd->GetFlag(PFD_ISSTICKY)) { #ifdef NOISY_CAN_PLACE_FRAME printf(" ==> last float was letter frame && frame is sticky\n"); #endif return PR_TRUE; } } } // If this is a piece of text inside a letter frame... if (pfd->GetFlag(PFD_ISNONEMPTYTEXTFRAME)) { if (psd->mFrame && psd->mFrame->GetFlag(PFD_ISLETTERFRAME)) { nsIFrame* prevInFlow; psd->mFrame->mFrame->GetPrevInFlow(&prevInFlow); if (prevInFlow) { nsIFrame* prevPrevInFlow; prevInFlow->GetPrevInFlow(&prevPrevInFlow); if (!prevPrevInFlow) { // And it's the first continuation of the letter frame... // Then make sure that the text fits return PR_TRUE; } } } } else if (pfd->GetFlag(PFD_ISLETTERFRAME)) { // If this is the first continuation of the letter frame... nsIFrame* prevInFlow; pfd->mFrame->GetPrevInFlow(&prevInFlow); if (prevInFlow) { nsIFrame* prevPrevInFlow; prevInFlow->GetPrevInFlow(&prevPrevInFlow); if (!prevPrevInFlow) { return PR_TRUE; } } } // Special check for span frames if (pfd->mSpan && pfd->mSpan->mContainsFloat) { // If the span either directly or indirectly contains a float then // it fits. Why? It's kind of complicated, but here goes: // // 1. CanPlaceFrame is used for all frame placements on a line, // and in a span. This includes recursively placement of frames // inside of spans, and the span itself. Because the logic always // checks for room before proceeding (the code above here), the // only things on a line will be those things that "fit". // // 2. Before a float is placed on a line, the line has to be empty // (otherwise its a "below current line" flaoter and will be placed // after the line). // // Therefore, if the span directly or indirectly has a float // then it means that at the time of the placement of the float // the line was empty. Because of #1, only the frames that fit can // be added after that point, therefore we can assume that the // current span being placed has fit. // // So how do we get here and have a span that should already fit // and yet doesn't: Simple: span's that have the no-wrap attribute // set on them and contain a float and are placed where they // don't naturally fit. return PR_TRUE; } #ifdef NOISY_CAN_PLACE_FRAME printf(" ==> didn't fit\n"); #endif aStatus = NS_INLINE_LINE_BREAK_BEFORE(); return PR_FALSE; } /** * Place the frame. Update running counters. */ void nsLineLayout::PlaceFrame(PerFrameData* pfd, nsHTMLReflowMetrics& aMetrics) { // If frame is zero width then do not apply its left and right margins. PerSpanData* psd = mCurrentSpan; PRBool emptyFrame = PR_FALSE; if ((0 == pfd->mBounds.width) && (0 == pfd->mBounds.height)) { pfd->mBounds.x = psd->mX; pfd->mBounds.y = mTopEdge; emptyFrame = PR_TRUE; } // Record ascent and update max-ascent and max-descent values pfd->mAscent = aMetrics.ascent; pfd->mDescent = aMetrics.descent; // If the band was updated during the reflow of that frame then we // need to adjust any prior frames that were reflowed. if (GetFlag(LL_UPDATEDBAND) && InBlockContext()) { UpdateFrames(); SetFlag(LL_UPDATEDBAND, PR_FALSE); } // Advance to next X coordinate psd->mX = pfd->mBounds.XMost() + pfd->mMargin.right; psd->mRightEdge = PR_MAX(psd->mRightEdge, psd->mX); // If the frame is a not aware of white-space and it takes up some // width, disable leading white-space compression for the next frame // to be reflowed. if ((!GetFlag(LL_UNDERSTANDSNWHITESPACE)) && pfd->mBounds.width) { SetFlag(LL_ENDSINWHITESPACE, PR_FALSE); } // Count the number of frames on the line... mTotalPlacedFrames++; if (psd->mX != psd->mLeftEdge || pfd->mBounds.x != psd->mLeftEdge) { // As soon as a frame placed on the line advances an X coordinate // of any span we can no longer place a float on the line. SetFlag(LL_CANPLACEFLOAT, PR_FALSE); } } nsresult nsLineLayout::AddBulletFrame(nsIFrame* aFrame, const nsHTMLReflowMetrics& aMetrics) { NS_ASSERTION(mCurrentSpan == mRootSpan, "bad linelayout user"); PerFrameData* pfd; nsresult rv = NewPerFrameData(&pfd); if (NS_SUCCEEDED(rv)) { mRootSpan->AppendFrame(pfd); pfd->mFrame = aFrame; pfd->mMargin.SizeTo(0, 0, 0, 0); pfd->mBorderPadding.SizeTo(0, 0, 0, 0); pfd->mFrameType = NS_CSS_FRAME_TYPE_INLINE|NS_FRAME_REPLACED_ELEMENT; pfd->mFlags = 0; // all flags default to false pfd->SetFlag(PFD_ISBULLET, PR_TRUE); pfd->mAscent = aMetrics.ascent; pfd->mDescent = aMetrics.descent; // Note: y value will be updated during vertical alignment pfd->mBounds = aFrame->GetRect(); pfd->mCombinedArea = aMetrics.mOverflowArea; if (mComputeMaxElementWidth) { pfd->mMaxElementWidth = aMetrics.width; } } return rv; } #ifdef DEBUG void nsLineLayout::DumpPerSpanData(PerSpanData* psd, PRInt32 aIndent) { nsFrame::IndentBy(stdout, aIndent); printf("%p: left=%d x=%d right=%d\n", NS_STATIC_CAST(void*, psd), psd->mLeftEdge, psd->mX, psd->mRightEdge); PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { nsFrame::IndentBy(stdout, aIndent+1); nsFrame::ListTag(stdout, pfd->mFrame); printf(" %d,%d,%d,%d\n", pfd->mBounds.x, pfd->mBounds.y, pfd->mBounds.width, pfd->mBounds.height); if (pfd->mSpan) { DumpPerSpanData(pfd->mSpan, aIndent + 1); } pfd = pfd->mNext; } } #endif #define VALIGN_OTHER 0 #define VALIGN_TOP 1 #define VALIGN_BOTTOM 2 PRBool nsLineLayout::IsPercentageUnitSides(const nsStyleSides* aSides) { return eStyleUnit_Percent == aSides->GetLeftUnit() || eStyleUnit_Percent == aSides->GetRightUnit() || eStyleUnit_Percent == aSides->GetTopUnit() || eStyleUnit_Percent == aSides->GetBottomUnit(); } PRBool nsLineLayout::IsPercentageAwareReplacedElement(nsIPresContext *aPresContext, nsIFrame* aFrame) { if (aFrame->GetStateBits() & NS_FRAME_REPLACED_ELEMENT) { nsIAtom* frameType = aFrame->GetType(); if (nsLayoutAtoms::brFrame != frameType && nsLayoutAtoms::textFrame != frameType) { const nsStyleMargin* margin = aFrame->GetStyleMargin(); if (IsPercentageUnitSides(&margin->mMargin)) { return PR_TRUE; } const nsStylePadding* padding = aFrame->GetStylePadding(); if (IsPercentageUnitSides(&padding->mPadding)) { return PR_TRUE; } const nsStyleBorder* border = aFrame->GetStyleBorder(); if (IsPercentageUnitSides(&border->mBorder)) { return PR_TRUE; } const nsStylePosition* pos = aFrame->GetStylePosition(); if (eStyleUnit_Percent == pos->mWidth.GetUnit() || eStyleUnit_Percent == pos->mMaxWidth.GetUnit() || eStyleUnit_Percent == pos->mMinWidth.GetUnit() || eStyleUnit_Percent == pos->mHeight.GetUnit() || eStyleUnit_Percent == pos->mMinHeight.GetUnit() || eStyleUnit_Percent == pos->mMaxHeight.GetUnit() || IsPercentageUnitSides(&pos->mOffset)) { // XXX need more here!!! return PR_TRUE; } } } return PR_FALSE; } PRBool IsPercentageAwareFrame(nsIPresContext *aPresContext, nsIFrame *aFrame) { if (aFrame->GetStateBits() & NS_FRAME_REPLACED_ELEMENT) { if (nsLineLayout::IsPercentageAwareReplacedElement(aPresContext, aFrame)) { return PR_TRUE; } } else { nsIFrame *child = aFrame->GetFirstChild(nsnull); if (child) { // aFrame is an inline container frame, check my frame state if (aFrame->GetStateBits() & NS_INLINE_FRAME_CONTAINS_PERCENT_AWARE_CHILD) { return PR_TRUE; } } // else it's a frame we just don't care about } return PR_FALSE; } void nsLineLayout::VerticalAlignLine(nsLineBox* aLineBox, nscoord* aMaxElementWidthResult) { // Synthesize a PerFrameData for the block frame PerFrameData rootPFD; rootPFD.mFrame = mBlockReflowState->frame; rootPFD.mFrameType = mBlockReflowState->mFrameType; rootPFD.mAscent = 0; rootPFD.mDescent = 0; mRootSpan->mFrame = &rootPFD; mLineBox = aLineBox; // Partially place the children of the block frame. The baseline for // this operation is set to zero so that the y coordinates for all // of the placed children will be relative to there. PerSpanData* psd = mRootSpan; VerticalAlignFrames(psd); // Compute the line-height. The line-height will be the larger of: // // [1] maxY - minY (the distance between the highest childs top edge // and the lowest childs bottom edge) // // [2] the maximum logical box height (since not every frame may have // participated in #1; for example: top/bottom aligned frames) // // [3] the minimum line height (line-height property set on the // block frame) nscoord lineHeight = psd->mMaxY - psd->mMinY; // Now that the line-height is computed, we need to know where the // baseline is in the line. Position baseline so that mMinY is just // inside the top of the line box. nscoord baselineY; if (psd->mMinY < 0) { baselineY = mTopEdge - psd->mMinY; } else { baselineY = mTopEdge; } // It's also possible that the line-height isn't tall enough because // of top/bottom aligned elements that were not accounted for in // min/max Y. // // The CSS2 spec doesn't really say what happens when to the // baseline in this situations. What we do is if the largest top // aligned box height is greater than the line-height then we leave // the baseline alone. If the largest bottom aligned box is greater // than the line-height then we slide the baseline down by the extra // amount. // // Navigator 4 gives precedence to the first top/bottom aligned // object. We just let bottom aligned objects win. if (lineHeight < mMaxBottomBoxHeight) { // When the line is shorter than the maximum top aligned box nscoord extra = mMaxBottomBoxHeight - lineHeight; baselineY += extra; lineHeight = mMaxBottomBoxHeight; } if (lineHeight < mMaxTopBoxHeight) { lineHeight = mMaxTopBoxHeight; } #ifdef NOISY_VERTICAL_ALIGN printf(" [line]==> lineHeight=%d baselineY=%d\n", lineHeight, baselineY); #endif // Now position all of the frames in the root span. We will also // recurse over the child spans and place any top/bottom aligned // frames we find. // XXX PERFORMANCE: set a bit per-span to avoid the extra work // (propagate it upward too) PerFrameData* pfd = psd->mFirstFrame; nscoord maxElementWidth = 0; PRBool prevFrameAccumulates = PR_FALSE; nscoord accumulatedWidth = 0; #ifdef HACK_MEW PRBool strictMode = InStrictMode(); PRBool inUnconstrainedTable = InUnconstrainedTableCell(*mBlockReflowState); #endif #ifdef DEBUG int frameCount = 0; #endif nscoord indent = mTextIndent; // Used for the first frame. while (nsnull != pfd) { // Compute max-element-width if necessary if (mComputeMaxElementWidth) { nscoord mw = pfd->mMaxElementWidth + pfd->mMargin.left + pfd->mMargin.right + indent; // Zero |indent| after including the 'text-indent' only for the // frame that is indented. indent = 0; if (psd->mNoWrap) { maxElementWidth += mw; } else { #ifdef HACK_MEW #ifdef DEBUG if (nsBlockFrame::gNoisyMaxElementWidth) frameCount++; #endif // if in Quirks mode and in a table cell with an unconstrained width, then emulate an IE // quirk to keep consecutive images from breaking the line // - see bugs 54565, 32191, and their many dups // XXX - reconsider how textFrame text measurement happens and have it take into account // image frames as well, thus eliminating the need for this code if (!strictMode && inUnconstrainedTable ) { nscoord imgSizes = AccumulateImageSizes(*mPresContext, *pfd->mFrame); // XXXldb We should NOT be using mCombinedArea here! PRBool curFrameAccumulates = (imgSizes > 0) || (pfd->mMaxElementWidth == pfd->mCombinedArea.width && pfd->GetFlag(PFD_ISNONWHITESPACETEXTFRAME)); // NOTE: we check for the maxElementWidth == the CombinedAreaWidth to detect when // a textframe has whitespace in it and thus should not be used as the basis // for accumulating the image width // - this is to handle images in a text run if(prevFrameAccumulates && curFrameAccumulates) { accumulatedWidth += mw; } else { accumulatedWidth = mw; } // now update the prevFrame prevFrameAccumulates = curFrameAccumulates; #ifdef DEBUG if (nsBlockFrame::gNoisyMaxElementWidth) { nsFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent); printf("(%d) last frame's MEW=%d | Accumulated MEW=%d\n", frameCount, mw, accumulatedWidth); } #endif mw = accumulatedWidth; } #endif // HACK_MEW // and finally reset the max element width if (maxElementWidth < mw) { maxElementWidth = mw; } } } PerSpanData* span = pfd->mSpan; #ifdef DEBUG NS_ASSERTION(0xFF != pfd->mVerticalAlign, "umr"); #endif switch (pfd->mVerticalAlign) { case VALIGN_TOP: if (span) { pfd->mBounds.y = mTopEdge - pfd->mBorderPadding.top + span->mTopLeading; } else { pfd->mBounds.y = mTopEdge + pfd->mMargin.top; } break; case VALIGN_BOTTOM: if (span) { // Compute bottom leading pfd->mBounds.y = mTopEdge + lineHeight - pfd->mBounds.height + pfd->mBorderPadding.bottom - span->mBottomLeading; } else { pfd->mBounds.y = mTopEdge + lineHeight - pfd->mMargin.bottom - pfd->mBounds.height; } break; case VALIGN_OTHER: pfd->mBounds.y += baselineY; break; } pfd->mFrame->SetRect(pfd->mBounds); #ifdef NOISY_VERTICAL_ALIGN printf(" [child of line]"); nsFrame::ListTag(stdout, pfd->mFrame); printf(": y=%d\n", pfd->mBounds.y); #endif if (span) { nscoord distanceFromTop = pfd->mBounds.y - mTopEdge; PlaceTopBottomFrames(span, distanceFromTop, lineHeight); } // check to see if the frame is an inline replace element // and if it is percent-aware. If so, mark the line. if ((PR_FALSE==aLineBox->ResizeReflowOptimizationDisabled()) && pfd->mFrameType & NS_CSS_FRAME_TYPE_INLINE) { if (IsPercentageAwareFrame(mPresContext, pfd->mFrame)) aLineBox->DisableResizeReflowOptimization(); } pfd = pfd->mNext; } // Fill in returned line-box and max-element-width data aLineBox->mBounds.x = psd->mLeftEdge; aLineBox->mBounds.y = mTopEdge; aLineBox->mBounds.width = psd->mX - psd->mLeftEdge; aLineBox->mBounds.height = lineHeight; mFinalLineHeight = lineHeight; *aMaxElementWidthResult = maxElementWidth; aLineBox->SetAscent(baselineY - mTopEdge); #ifdef NOISY_VERTICAL_ALIGN printf( " [line]==> bounds{x,y,w,h}={%d,%d,%d,%d} lh=%d a=%d mew=%d\n", aLineBox->mBounds.x, aLineBox->mBounds.y, aLineBox->mBounds.width, aLineBox->mBounds.height, mFinalLineHeight, aLineBox->GetAscent(), *aMaxElementWidthResult); #endif // Undo root-span mFrame pointer to prevent brane damage later on... mRootSpan->mFrame = nsnull; mLineBox = nsnull; } void nsLineLayout::PlaceTopBottomFrames(PerSpanData* psd, nscoord aDistanceFromTop, nscoord aLineHeight) { PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { PerSpanData* span = pfd->mSpan; #ifdef DEBUG NS_ASSERTION(0xFF != pfd->mVerticalAlign, "umr"); #endif switch (pfd->mVerticalAlign) { case VALIGN_TOP: if (span) { pfd->mBounds.y = -aDistanceFromTop - pfd->mBorderPadding.top + span->mTopLeading; } else { pfd->mBounds.y = -aDistanceFromTop + pfd->mMargin.top; } pfd->mFrame->SetRect(pfd->mBounds); #ifdef NOISY_VERTICAL_ALIGN printf(" "); nsFrame::ListTag(stdout, pfd->mFrame); printf(": y=%d dTop=%d [bp.top=%d topLeading=%d]\n", pfd->mBounds.y, aDistanceFromTop, span ? pfd->mBorderPadding.top : 0, span ? span->mTopLeading : 0); #endif break; case VALIGN_BOTTOM: if (span) { // Compute bottom leading pfd->mBounds.y = -aDistanceFromTop + aLineHeight - pfd->mBounds.height + pfd->mBorderPadding.bottom - span->mBottomLeading; } else { pfd->mBounds.y = -aDistanceFromTop + aLineHeight - pfd->mMargin.bottom - pfd->mBounds.height; } pfd->mFrame->SetRect(pfd->mBounds); #ifdef NOISY_VERTICAL_ALIGN printf(" "); nsFrame::ListTag(stdout, pfd->mFrame); printf(": y=%d\n", pfd->mBounds.y); #endif break; } if (span) { nscoord distanceFromTop = aDistanceFromTop + pfd->mBounds.y; PlaceTopBottomFrames(span, distanceFromTop, aLineHeight); } pfd = pfd->mNext; } } #define VERTICAL_ALIGN_FRAMES_NO_MINIMUM 32767 #define VERTICAL_ALIGN_FRAMES_NO_MAXIMUM -32768 // Vertically place frames within a given span. Note: this doesn't // place top/bottom aligned frames as those have to wait until the // entire line box height is known. This is called after the span // frame has finished being reflowed so that we know its height. void nsLineLayout::VerticalAlignFrames(PerSpanData* psd) { // Get parent frame info PerFrameData* spanFramePFD = psd->mFrame; nsIFrame* spanFrame = spanFramePFD->mFrame; // Get the parent frame's font for all of the frames in this span nsStyleContext* styleContext = spanFrame->GetStyleContext(); nsIRenderingContext* rc = mBlockReflowState->rendContext; SetFontFromStyle(mBlockReflowState->rendContext, styleContext); nsCOMPtr fm; rc->GetFontMetrics(*getter_AddRefs(fm)); PRBool preMode = (mStyleText->mWhiteSpace == NS_STYLE_WHITESPACE_PRE) || (mStyleText->mWhiteSpace == NS_STYLE_WHITESPACE_MOZ_PRE_WRAP); // See if the span is an empty continuation. It's an empty continuation iff: // - it has a prev-in-flow // - it has no next in flow // - it's zero sized nsIFrame* spanNextInFlow; spanFrame->GetNextInFlow(&spanNextInFlow); nsIFrame* spanPrevInFlow; spanFrame->GetPrevInFlow(&spanPrevInFlow); PRBool emptyContinuation = spanPrevInFlow && !spanNextInFlow && (0 == spanFramePFD->mBounds.width) && (0 == spanFramePFD->mBounds.height); #ifdef NOISY_VERTICAL_ALIGN printf("[%sSpan]", (psd == mRootSpan)?"Root":""); nsFrame::ListTag(stdout, spanFrame); printf(": preMode=%s strictMode=%s w/h=%d,%d emptyContinuation=%s", preMode ? "yes" : "no", InStrictMode() ? "yes" : "no", spanFramePFD->mBounds.width, spanFramePFD->mBounds.height, emptyContinuation ? "yes" : "no"); if (psd != mRootSpan) { printf(" bp=%d,%d,%d,%d margin=%d,%d,%d,%d", spanFramePFD->mBorderPadding.top, spanFramePFD->mBorderPadding.right, spanFramePFD->mBorderPadding.bottom, spanFramePFD->mBorderPadding.left, spanFramePFD->mMargin.top, spanFramePFD->mMargin.right, spanFramePFD->mMargin.bottom, spanFramePFD->mMargin.left); } printf("\n"); #endif // Compute the span's mZeroEffectiveSpanBox flag. What we are trying // to determine is how we should treat the span: should it act // "normally" according to css2 or should it effectively // "disappear". // // In general, if the document being processed is in full standards // mode then it should act normally (with one exception). The // exception case is when a span is continued and yet the span is // empty (e.g. compressed whitespace). For this kind of span we treat // it as if it were not there so that it doesn't impact the // line-height. // // In almost standards mode or quirks mode, we should sometimes make // it disappear. The cases that matter are those where the span // contains no real text elements that would provide an ascent and // descent and height. However, if css style elements have been // applied to the span (border/padding/margin) so that it's clear the // document author is intending css2 behavior then we act as if strict // mode is set. // // This code works correctly for preMode, because a blank line // in PRE mode is encoded as a text node with a LF in it, since // text nodes with only whitespace are considered in preMode. // // Much of this logic is shared with the various implementations of // nsIFrame::IsEmpty since they need to duplicate the way it makes // some lines empty. However, nsIFrame::IsEmpty can't be reused here // since this code sets zeroEffectiveSpanBox even when there are // non-empty children. PRBool zeroEffectiveSpanBox = PR_FALSE; // XXXldb If we really have empty continuations, then all these other // checks don't make sense for them. if ((emptyContinuation || mCompatMode != eCompatibility_FullStandards) && ((psd == mRootSpan) || ((0 == spanFramePFD->mBorderPadding.top) && (0 == spanFramePFD->mBorderPadding.right) && (0 == spanFramePFD->mBorderPadding.bottom) && (0 == spanFramePFD->mBorderPadding.left) && (0 == spanFramePFD->mMargin.top) && (0 == spanFramePFD->mMargin.right) && (0 == spanFramePFD->mMargin.bottom) && (0 == spanFramePFD->mMargin.left)))) { // This code handles an issue with compatability with non-css // conformant browsers. In particular, there are some cases // where the font-size and line-height for a span must be // ignored and instead the span must *act* as if it were zero // sized. In general, if the span contains any non-compressed // text then we don't use this logic. // However, this is not propagated outwards, since (in compatibility // mode) we don't want big line heights for things like //

Text

// We shouldn't include any whitespace that collapses, unless we're // preformatted (in which case it shouldn't, but the width=0 test is // perhaps incorrect). This includes whitespace at the beginning of // a line and whitespace preceded (?) by other whitespace. // See bug 134580 and bug 155333. zeroEffectiveSpanBox = PR_TRUE; for (PerFrameData* pfd = psd->mFirstFrame; pfd; pfd = pfd->mNext) { if (pfd->GetFlag(PFD_ISTEXTFRAME) && (pfd->GetFlag(PFD_ISNONWHITESPACETEXTFRAME) || preMode || pfd->mBounds.width != 0)) { zeroEffectiveSpanBox = PR_FALSE; break; } } } psd->mZeroEffectiveSpanBox = zeroEffectiveSpanBox; // Setup baselineY, minY, and maxY nscoord baselineY, minY, maxY; if (psd == mRootSpan) { // Use a zero baselineY since we don't yet know where the baseline // will be (until we know how tall the line is; then we will // know). In addition, use extreme values for the minY and maxY // values so that only the child frames will impact their values // (since these are children of the block, there is no span box to // provide initial values). baselineY = 0; minY = VERTICAL_ALIGN_FRAMES_NO_MINIMUM; maxY = VERTICAL_ALIGN_FRAMES_NO_MAXIMUM; #ifdef NOISY_VERTICAL_ALIGN printf("[RootSpan]"); nsFrame::ListTag(stdout, spanFrame); printf(": pass1 valign frames: topEdge=%d minLineHeight=%d zeroEffectiveSpanBox=%s\n", mTopEdge, mMinLineHeight, zeroEffectiveSpanBox ? "yes" : "no"); #endif } else { // Compute the logical height for this span. The logical height // is based on the line-height value, not the font-size. Also // compute the top leading. nscoord logicalHeight = nsHTMLReflowState::CalcLineHeight(mPresContext, rc, spanFrame); nscoord contentHeight = spanFramePFD->mBounds.height - spanFramePFD->mBorderPadding.top - spanFramePFD->mBorderPadding.bottom; nscoord leading = logicalHeight - contentHeight; psd->mTopLeading = leading / 2; psd->mBottomLeading = leading - psd->mTopLeading; psd->mLogicalHeight = logicalHeight; if (zeroEffectiveSpanBox) { // When the span-box is to be ignored, zero out the initial // values so that the span doesn't impact the final line // height. The contents of the span can impact the final line // height. // Note that things are readjusted for this span after its children // are reflowed minY = VERTICAL_ALIGN_FRAMES_NO_MINIMUM; maxY = VERTICAL_ALIGN_FRAMES_NO_MAXIMUM; } else { // The initial values for the min and max Y values are in the spans // coordinate space, and cover the logical height of the span. If // there are child frames in this span that stick out of this area // then the minY and maxY are updated by the amount of logical // height that is outside this range. minY = spanFramePFD->mBorderPadding.top - psd->mTopLeading; maxY = minY + psd->mLogicalHeight; } // This is the distance from the top edge of the parents visual // box to the baseline. The span already computed this for us, // so just use it. baselineY = spanFramePFD->mAscent; #ifdef NOISY_VERTICAL_ALIGN printf("[%sSpan]", (psd == mRootSpan)?"Root":""); nsFrame::ListTag(stdout, spanFrame); printf(": baseLine=%d logicalHeight=%d topLeading=%d h=%d bp=%d,%d zeroEffectiveSpanBox=%s\n", baselineY, psd->mLogicalHeight, psd->mTopLeading, spanFramePFD->mBounds.height, spanFramePFD->mBorderPadding.top, spanFramePFD->mBorderPadding.bottom, zeroEffectiveSpanBox ? "yes" : "no"); #endif } nscoord maxTopBoxHeight = 0; nscoord maxBottomBoxHeight = 0; PerFrameData* pfd = psd->mFirstFrame; while (nsnull != pfd) { nsIFrame* frame = pfd->mFrame; // sanity check (see bug 105168, non-reproducable crashes from null frame) NS_ASSERTION(frame, "null frame in PerFrameData - something is very very bad"); if (!frame) { return; } // Compute the logical height of the frame nscoord logicalHeight; nscoord topLeading; PerSpanData* frameSpan = pfd->mSpan; if (frameSpan) { // For span frames the logical-height and top-leading was // pre-computed when the span was reflowed. logicalHeight = frameSpan->mLogicalHeight; topLeading = frameSpan->mTopLeading; } else { // For other elements the logical height is the same as the // frames height plus its margins. logicalHeight = pfd->mBounds.height + pfd->mMargin.top + pfd->mMargin.bottom; topLeading = 0; } // Get vertical-align property const nsStyleTextReset* textStyle = frame->GetStyleTextReset(); nsStyleUnit verticalAlignUnit = textStyle->mVerticalAlign.GetUnit(); #ifdef NOISY_VERTICAL_ALIGN printf(" [frame]"); nsFrame::ListTag(stdout, frame); printf(": verticalAlignUnit=%d (enum == %d)\n", verticalAlignUnit, ((eStyleUnit_Enumerated == verticalAlignUnit) ? textStyle->mVerticalAlign.GetIntValue() : -1)); #endif PRUint8 verticalAlignEnum; nscoord parentAscent, parentDescent, parentXHeight; nscoord parentSuperscript, parentSubscript; nscoord coordOffset, percentOffset, elementLineHeight; nscoord revisedBaselineY; switch (verticalAlignUnit) { case eStyleUnit_Enumerated: default: if (eStyleUnit_Enumerated == verticalAlignUnit) { verticalAlignEnum = textStyle->mVerticalAlign.GetIntValue(); } else { verticalAlignEnum = NS_STYLE_VERTICAL_ALIGN_BASELINE; } switch (verticalAlignEnum) { default: case NS_STYLE_VERTICAL_ALIGN_BASELINE: // The elements baseline is aligned with the baseline of // the parent. if (frameSpan) { // XXX explain pfd->mBounds.y = baselineY - pfd->mAscent; } else { // For non-span elements the borders, padding and // margins are significant. Use the visual box height // and the bottom margin as the distance off of the // baseline. pfd->mBounds.y = baselineY - pfd->mAscent - pfd->mMargin.bottom; } pfd->mVerticalAlign = VALIGN_OTHER; break; case NS_STYLE_VERTICAL_ALIGN_SUB: // Lower the baseline of the box to the subscript offset // of the parent's box. This is identical to the baseline // alignment except for the addition of the subscript // offset to the baseline Y. fm->GetSubscriptOffset(parentSubscript); revisedBaselineY = baselineY + parentSubscript; if (frameSpan) { pfd->mBounds.y = revisedBaselineY - pfd->mAscent; } else { pfd->mBounds.y = revisedBaselineY - pfd->mAscent - pfd->mMargin.bottom; } pfd->mVerticalAlign = VALIGN_OTHER; break; case NS_STYLE_VERTICAL_ALIGN_SUPER: // Raise the baseline of the box to the superscript offset // of the parent's box. This is identical to the baseline // alignment except for the subtraction of the superscript // offset to the baseline Y. fm->GetSuperscriptOffset(parentSuperscript); revisedBaselineY = baselineY - parentSuperscript; if (frameSpan) { pfd->mBounds.y = revisedBaselineY - pfd->mAscent; } else { pfd->mBounds.y = revisedBaselineY - pfd->mAscent - pfd->mMargin.bottom; } pfd->mVerticalAlign = VALIGN_OTHER; break; case NS_STYLE_VERTICAL_ALIGN_TOP: pfd->mVerticalAlign = VALIGN_TOP; if (logicalHeight > maxTopBoxHeight) { maxTopBoxHeight = logicalHeight; } break; case NS_STYLE_VERTICAL_ALIGN_BOTTOM: pfd->mVerticalAlign = VALIGN_BOTTOM; if (logicalHeight > maxBottomBoxHeight) { maxBottomBoxHeight = logicalHeight; } break; case NS_STYLE_VERTICAL_ALIGN_MIDDLE: // Align the midpoint of the frame with 1/2 the parents // x-height above the baseline. fm->GetXHeight(parentXHeight); if (frameSpan) { pfd->mBounds.y = baselineY - (parentXHeight + pfd->mBounds.height)/2; } else { pfd->mBounds.y = baselineY - (parentXHeight + logicalHeight)/2 + pfd->mMargin.top; } pfd->mVerticalAlign = VALIGN_OTHER; break; case NS_STYLE_VERTICAL_ALIGN_TEXT_TOP: // The top of the logical box is aligned with the top of // the parent elements text. fm->GetMaxAscent(parentAscent); if (frameSpan) { pfd->mBounds.y = baselineY - parentAscent - pfd->mBorderPadding.top + frameSpan->mTopLeading; } else { pfd->mBounds.y = baselineY - parentAscent + pfd->mMargin.top; } pfd->mVerticalAlign = VALIGN_OTHER; break; case NS_STYLE_VERTICAL_ALIGN_TEXT_BOTTOM: // The bottom of the logical box is aligned with the // bottom of the parent elements text. fm->GetMaxDescent(parentDescent); if (frameSpan) { pfd->mBounds.y = baselineY + parentDescent - pfd->mBounds.height + pfd->mBorderPadding.bottom - frameSpan->mBottomLeading; } else { pfd->mBounds.y = baselineY + parentDescent - pfd->mBounds.height - pfd->mMargin.bottom; } pfd->mVerticalAlign = VALIGN_OTHER; break; } break; case eStyleUnit_Coord: // According to the CSS2 spec (10.8.1), a positive value // "raises" the box by the given distance while a negative value // "lowers" the box by the given distance (with zero being the // baseline). Since Y coordinates increase towards the bottom of // the screen we reverse the sign. coordOffset = textStyle->mVerticalAlign.GetCoordValue(); revisedBaselineY = baselineY - coordOffset; if (frameSpan) { pfd->mBounds.y = revisedBaselineY - pfd->mAscent; } else { pfd->mBounds.y = revisedBaselineY - pfd->mAscent - pfd->mMargin.bottom; } pfd->mVerticalAlign = VALIGN_OTHER; break; case eStyleUnit_Percent: // Similar to a length value (eStyleUnit_Coord) except that the // percentage is a function of the elements line-height value. elementLineHeight = nsHTMLReflowState::CalcLineHeight(mPresContext, rc, frame); percentOffset = nscoord( textStyle->mVerticalAlign.GetPercentValue() * elementLineHeight ); revisedBaselineY = baselineY - percentOffset; if (frameSpan) { pfd->mBounds.y = revisedBaselineY - pfd->mAscent; } else { pfd->mBounds.y = revisedBaselineY - pfd->mAscent - pfd->mMargin.bottom; } pfd->mVerticalAlign = VALIGN_OTHER; break; } // Update minY/maxY for frames that we just placed. Do not factor // text into the equation. if (pfd->mVerticalAlign == VALIGN_OTHER) { // Text frames do not contribute to the min/max Y values for the // line (instead their parent frame's font-size contributes). // XXXrbs -- relax this restriction because it causes text frames // to jam together when 'font-size-adjust' is enabled // and layout is using dynamic font heights (bug 20394) // -- Note #1: With this code enabled and with the fact that we are not // using Em[Ascent|Descent] as nsDimensions for text metrics in // GFX mean that the discussion in bug 13072 cannot hold. // -- Note #2: We still don't want empty-text frames to interfere. // For example in quirks mode, avoiding empty text frames prevents // "tall" lines around elements like
since the rules of
// in quirks.css have pseudo text contents with LF in them. #if 0 if (!pfd->GetFlag(PFD_ISTEXTFRAME)) { #else // Only consider non empty text frames when line-height=normal PRBool canUpdate = !pfd->GetFlag(PFD_ISTEXTFRAME); if (!canUpdate && pfd->GetFlag(PFD_ISNONWHITESPACETEXTFRAME)) { nsStyleUnit lhUnit = frame->GetStyleText()->mLineHeight.GetUnit(); canUpdate = lhUnit == eStyleUnit_Normal || lhUnit == eStyleUnit_Null; } if (canUpdate) { #endif nscoord yTop, yBottom; if (frameSpan) { // For spans that were are now placing, use their position // plus their already computed min-Y and max-Y values for // computing yTop and yBottom. yTop = pfd->mBounds.y + frameSpan->mMinY; yBottom = pfd->mBounds.y + frameSpan->mMaxY; } else { yTop = pfd->mBounds.y - pfd->mMargin.top; yBottom = yTop + logicalHeight; } if (!preMode && GetCompatMode() != eCompatibility_FullStandards && !logicalHeight) { // Check if it's a BR frame that is not alone on its line (it // is given a height of zero to indicate this), and if so reset // yTop and yBottom so that BR frames don't influence the line. if (nsLayoutAtoms::brFrame == frame->GetType()) { yTop = VERTICAL_ALIGN_FRAMES_NO_MINIMUM; yBottom = VERTICAL_ALIGN_FRAMES_NO_MAXIMUM; } } if (yTop < minY) minY = yTop; if (yBottom > maxY) maxY = yBottom; #ifdef NOISY_VERTICAL_ALIGN printf(" [frame]raw: a=%d d=%d h=%d bp=%d,%d logical: h=%d leading=%d y=%d minY=%d maxY=%d\n", pfd->mAscent, pfd->mDescent, pfd->mBounds.height, pfd->mBorderPadding.top, pfd->mBorderPadding.bottom, logicalHeight, pfd->mSpan ? topLeading : 0, pfd->mBounds.y, minY, maxY); #endif } if (psd != mRootSpan) { frame->SetRect(pfd->mBounds); } } pfd = pfd->mNext; } // Factor in the minimum line-height when handling the root-span for // the block. if (psd == mRootSpan) { // We should factor in the block element's minimum line-height (as // defined in section 10.8.1 of the css2 spec) assuming that // mZeroEffectiveSpanBox is not set on the root span. This only happens // in some cases in quirks mode: // (1) if the root span contains non-whitespace text directly (this // is handled by mZeroEffectiveSpanBox // (2) if this is the first line of an LI element (whether or not // there is a bullet (NN4/IE5 quirk) // (3) if this is the last line of an LI, DT, or DD element // (The last line before a block also counts, but not before a // BR) (NN4/IE5 quirk) PRBool applyMinLH = !(psd->mZeroEffectiveSpanBox); // (1) above PRBool isFirstLine = !mLineNumber; // if the line number is 0 PRBool isLastLine = (!mLineBox->IsLineWrapped() && !GetFlag(LL_LINEENDSINBR)); PRBool foundLI = PR_FALSE; // hack to fix bug 50480. //XXX: rather than remembering if we've found an LI, we really should be checking // for the existence of a bullet frame. Likewise, the code below should not // be checking for any particular content tag type, but rather should // be checking for the existence of a bullet frame to determine if it's a list element or not. if (!applyMinLH && (isFirstLine || isLastLine)) { nsIContent* blockContent = mRootSpan->mFrame->mFrame->GetContent(); if (blockContent) { nsIAtom *blockTagAtom = blockContent->Tag(); // (2) above, if the first line of LI if (isFirstLine && blockTagAtom == nsHTMLAtoms::li) { // if the line is empty, then don't force the min height // (see bug 75963) if (!IsZeroHeight()) { applyMinLH = PR_TRUE; foundLI = PR_TRUE; } } // (3) above, if the last line of LI, DT, or DD else if (!applyMinLH && isLastLine && ((blockTagAtom == nsHTMLAtoms::li) || (blockTagAtom == nsHTMLAtoms::dt) || (blockTagAtom == nsHTMLAtoms::dd))) { applyMinLH = PR_TRUE; } } } if (applyMinLH) { if ((psd->mX != psd->mLeftEdge) || preMode || foundLI) { #ifdef NOISY_VERTICAL_ALIGN printf(" [span]==> adjusting min/maxY: currentValues: %d,%d", minY, maxY); #endif nscoord minimumLineHeight = mMinLineHeight; nscoord fontAscent, fontHeight; fm->GetMaxAscent(fontAscent); if (nsHTMLReflowState::UseComputedHeight()) { fontHeight = spanFrame->GetStyleFont()->mFont.size; } else { fm->GetHeight(fontHeight); } nscoord leading = minimumLineHeight - fontHeight; nscoord yTop = -fontAscent - leading/2; nscoord yBottom = yTop + minimumLineHeight; if (yTop < minY) minY = yTop; if (yBottom > maxY) maxY = yBottom; #ifdef NOISY_VERTICAL_ALIGN printf(" new values: %d,%d\n", minY, maxY); #endif } else { // XXX issues: // [1] BR's on empty lines stop working // [2] May not honor css2's notion of handling empty elements // [3] blank lines in a pre-section ("\n") (handled with preMode) // XXX Are there other problems with this? #ifdef NOISY_VERTICAL_ALIGN printf(" [span]==> zapping min/maxY: currentValues: %d,%d newValues: 0,0\n", minY, maxY); #endif minY = maxY = 0; } } } if ((minY == VERTICAL_ALIGN_FRAMES_NO_MINIMUM) || (maxY == VERTICAL_ALIGN_FRAMES_NO_MINIMUM)) { minY = maxY = baselineY; } if ((psd != mRootSpan) && (psd->mZeroEffectiveSpanBox)) { #ifdef NOISY_VERTICAL_ALIGN printf(" [span]adjusting for zeroEffectiveSpanBox\n"); printf(" Original: minY=%d, maxY=%d, height=%d, ascent=%d, descent=%d, logicalHeight=%d, topLeading=%d, bottomLeading=%d\n", minY, maxY, spanFramePFD->mBounds.height, spanFramePFD->mAscent, spanFramePFD->mDescent, psd->mLogicalHeight, psd->mTopLeading, psd->mBottomLeading); #endif nscoord goodMinY = spanFramePFD->mBorderPadding.top - psd->mTopLeading; nscoord goodMaxY = goodMinY + psd->mLogicalHeight; if (minY > goodMinY) { nscoord adjust = minY - goodMinY; // positive // shrink the logical extents psd->mLogicalHeight -= adjust; psd->mTopLeading -= adjust; } if (maxY < goodMaxY) { nscoord adjust = goodMaxY - maxY; psd->mLogicalHeight -= adjust; psd->mBottomLeading -= adjust; } if (minY > 0) { // shrink the content by moving its top down. This is tricky, since // the top is the 0 for many coordinates, so what we do is // move everything else up. spanFramePFD->mAscent -= minY; // move the baseline up spanFramePFD->mBounds.height -= minY; // move the bottom up psd->mTopLeading += minY; pfd = psd->mFirstFrame; while (nsnull != pfd) { pfd->mBounds.y -= minY; // move all the children back up pfd->mFrame->SetRect(pfd->mBounds); pfd = pfd->mNext; } maxY -= minY; // since minY is in the frame's own coordinate system minY = 0; } if (maxY < spanFramePFD->mBounds.height) { nscoord adjust = spanFramePFD->mBounds.height - maxY; spanFramePFD->mBounds.height -= adjust; // move the bottom up spanFramePFD->mDescent -= adjust; psd->mBottomLeading += adjust; } #ifdef NOISY_VERTICAL_ALIGN printf(" New: minY=%d, maxY=%d, height=%d, ascent=%d, descent=%d, logicalHeight=%d, topLeading=%d, bottomLeading=%d\n", minY, maxY, spanFramePFD->mBounds.height, spanFramePFD->mAscent, spanFramePFD->mDescent, psd->mLogicalHeight, psd->mTopLeading, psd->mBottomLeading); #endif } psd->mMinY = minY; psd->mMaxY = maxY; #ifdef NOISY_VERTICAL_ALIGN printf(" [span]==> minY=%d maxY=%d delta=%d maxTopBoxHeight=%d maxBottomBoxHeight=%d\n", minY, maxY, maxY - minY, maxTopBoxHeight, maxBottomBoxHeight); #endif if (maxTopBoxHeight > mMaxTopBoxHeight) { mMaxTopBoxHeight = maxTopBoxHeight; } if (maxBottomBoxHeight > mMaxBottomBoxHeight) { mMaxBottomBoxHeight = maxBottomBoxHeight; } } PRBool nsLineLayout::TrimTrailingWhiteSpaceIn(PerSpanData* psd, nscoord* aDeltaWidth) { #ifndef IBMBIDI // XXX what about NS_STYLE_DIRECTION_RTL? if (NS_STYLE_DIRECTION_RTL == psd->mDirection) { *aDeltaWidth = 0; return PR_TRUE; } #endif PerFrameData* pfd = psd->mFirstFrame; if (!pfd) { *aDeltaWidth = 0; return PR_FALSE; } pfd = pfd->Last(); while (nsnull != pfd) { #ifdef REALLY_NOISY_TRIM nsFrame::ListTag(stdout, (psd == mRootSpan ? mBlockReflowState->frame : psd->mFrame->mFrame)); printf(": attempting trim of "); nsFrame::ListTag(stdout, pfd->mFrame); printf("\n"); #endif PerSpanData* childSpan = pfd->mSpan; if (childSpan) { // Maybe the child span has the trailing white-space in it? if (TrimTrailingWhiteSpaceIn(childSpan, aDeltaWidth)) { nscoord deltaWidth = *aDeltaWidth; if (deltaWidth) { // Adjust the child spans frame size pfd->mBounds.width -= deltaWidth; if (psd != mRootSpan) { // When the child span is not a direct child of the block // we need to update the child spans frame rectangle // because it most likely will not be done again. Spans // that are direct children of the block will be updated // later, however, because the VerticalAlignFrames method // will be run after this method. nsIFrame* f = pfd->mFrame; nsRect r = f->GetRect(); r.width -= deltaWidth; f->SetRect(r); } // Adjust the right edge of the span that contains the child span psd->mX -= deltaWidth; // Slide any frames that follow the child span over by the // right amount. The only thing that can follow the child // span is empty stuff, so we are just making things // sensible (keeping the combined area honest). while (pfd->mNext) { pfd = pfd->mNext; pfd->mBounds.x -= deltaWidth; } } return PR_TRUE; } } else if (!pfd->GetFlag(PFD_ISTEXTFRAME) && !pfd->GetFlag(PFD_ISPLACEHOLDERFRAME)) { // If we hit a frame on the end that's not text and not a placeholder, // then there is no trailing whitespace to trim. Stop the search. *aDeltaWidth = 0; return PR_TRUE; } else if (pfd->GetFlag(PFD_ISNONEMPTYTEXTFRAME)) { nscoord deltaWidth = 0; pfd->mFrame->TrimTrailingWhiteSpace(mPresContext, *mBlockReflowState->rendContext, deltaWidth); #ifdef NOISY_TRIM nsFrame::ListTag(stdout, (psd == mRootSpan ? mBlockReflowState->frame : psd->mFrame->mFrame)); printf(": trim of "); nsFrame::ListTag(stdout, pfd->mFrame); printf(" returned %d\n", deltaWidth); #endif if (deltaWidth) { if (pfd->mJustificationNumSpaces > 0) { pfd->mJustificationNumSpaces--; } pfd->mBounds.width -= deltaWidth; pfd->mCombinedArea.width -= deltaWidth; if (0 == pfd->mBounds.width) { pfd->mMaxElementWidth = 0; } // See if the text frame has already been placed in its parent if (psd != mRootSpan) { // The frame was already placed during psd's // reflow. Update the frames rectangle now. pfd->mFrame->SetRect(pfd->mBounds); } // Adjust containing span's right edge psd->mX -= deltaWidth; // Slide any frames that follow the text frame over by the // right amount. The only thing that can follow the text // frame is empty stuff, so we are just making things // sensible (keeping the combined area honest). while (pfd->mNext) { pfd = pfd->mNext; pfd->mBounds.x -= deltaWidth; } } // Pass up to caller so they can shrink their span *aDeltaWidth = deltaWidth; return PR_TRUE; } pfd = pfd->mPrev; } *aDeltaWidth = 0; return PR_FALSE; } PRBool nsLineLayout::TrimTrailingWhiteSpace() { PerSpanData* psd = mRootSpan; nscoord deltaWidth; TrimTrailingWhiteSpaceIn(psd, &deltaWidth); return 0 != deltaWidth; } void nsLineLayout::ComputeJustificationWeights(PerSpanData* aPSD, PRInt32* aNumSpaces, PRInt32* aNumLetters) { NS_ASSERTION(aPSD, "null arg"); NS_ASSERTION(aNumSpaces, "null arg"); NS_ASSERTION(aNumLetters, "null arg"); PRInt32 numSpaces = 0; PRInt32 numLetters = 0; for (PerFrameData* pfd = aPSD->mFirstFrame; pfd != nsnull; pfd = pfd->mNext) { if (PR_TRUE == pfd->GetFlag(PFD_ISTEXTFRAME)) { numSpaces += pfd->mJustificationNumSpaces; numLetters += pfd->mJustificationNumLetters; } else if (pfd->mSpan != nsnull) { PRInt32 spanSpaces; PRInt32 spanLetters; ComputeJustificationWeights(pfd->mSpan, &spanSpaces, &spanLetters); numSpaces += spanSpaces; numLetters += spanLetters; } } *aNumSpaces = numSpaces; *aNumLetters = numLetters; } nscoord nsLineLayout::ApplyFrameJustification(PerSpanData* aPSD, FrameJustificationState* aState) { NS_ASSERTION(aPSD, "null arg"); NS_ASSERTION(aState, "null arg"); nscoord deltaX = 0; for (PerFrameData* pfd = aPSD->mFirstFrame; pfd != nsnull; pfd = pfd->mNext) { // Don't reposition bullets (and other frames that occur out of X-order?) if (!pfd->GetFlag(PFD_ISBULLET)) { nscoord dw = 0; pfd->mBounds.x += deltaX; if (PR_TRUE == pfd->GetFlag(PFD_ISTEXTFRAME)) { if (aState->mTotalWidthForSpaces > 0 && aState->mTotalNumSpaces > 0 && // we divide by this value, so must be non-zero aState->mTotalNumLetters >0 // we divide by this value, so must be non-zero ) { aState->mNumSpacesProcessed += pfd->mJustificationNumSpaces; nscoord newAllocatedWidthForSpaces = (aState->mTotalWidthForSpaces*aState->mNumSpacesProcessed) /aState->mTotalNumSpaces; dw += newAllocatedWidthForSpaces - aState->mWidthForSpacesProcessed; aState->mWidthForSpacesProcessed = newAllocatedWidthForSpaces; } if (aState->mTotalWidthForLetters > 0) { aState->mNumLettersProcessed += pfd->mJustificationNumLetters; nscoord newAllocatedWidthForLetters = (aState->mTotalWidthForLetters*aState->mNumLettersProcessed) /aState->mTotalNumLetters; dw += newAllocatedWidthForLetters - aState->mWidthForLettersProcessed; aState->mWidthForLettersProcessed = newAllocatedWidthForLetters; } } else { if (nsnull != pfd->mSpan) { dw += ApplyFrameJustification(pfd->mSpan, aState); } } pfd->mBounds.width += dw; deltaX += dw; pfd->mFrame->SetRect(pfd->mBounds); } } return deltaX; } PRBool nsLineLayout::HorizontalAlignFrames(nsRect& aLineBounds, PRBool aAllowJustify, PRBool aShrinkWrapWidth) { PerSpanData* psd = mRootSpan; nscoord availWidth = psd->mRightEdge; if (NS_UNCONSTRAINEDSIZE == availWidth) { // Don't bother horizontal aligning on pass1 table reflow #ifdef NOISY_HORIZONTAL_ALIGN nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": skipping horizontal alignment in pass1 table reflow\n"); #endif return PR_TRUE; } #ifdef IBMBIDI if (NS_STYLE_DIRECTION_RTL == psd->mDirection) { // This is to ensure proper indentation (e.g. of list items) availWidth -= aLineBounds.x; } else #endif // IBMBIDI availWidth -= psd->mLeftEdge; nscoord remainingWidth = availWidth - aLineBounds.width; #ifdef NOISY_HORIZONTAL_ALIGN nsFrame::ListTag(stdout, mBlockReflowState->frame); printf(": availWidth=%d lineWidth=%d delta=%d\n", availWidth, aLineBounds.width, remainingWidth); #endif #ifdef IBMBIDI if (remainingWidth + aLineBounds.x > 0) #else // XXXldb What if it's less than 0?? if (remainingWidth > 0) #endif { nscoord dx = 0; switch (mTextAlign) { case NS_STYLE_TEXT_ALIGN_DEFAULT: if (NS_STYLE_DIRECTION_LTR == psd->mDirection) { // default alignment for left-to-right is left so do nothing break; } // Fall through to align right case for default alignment // used when the direction is right-to-left. case NS_STYLE_TEXT_ALIGN_RIGHT: case NS_STYLE_TEXT_ALIGN_MOZ_RIGHT: { // fix for bug 50758 // right-aligned text in a text control doesn't know how to paint itself // so we force the invalidate here. Getting the current line is quick, // and at worst we're invalidating more of the line (and just that line) than we need to. nsLineBox *currentLine=nsnull; // use localResult because a failure here should not be propagated to my caller nsresult localResult = nsBlockFrame::GetCurrentLine(mBlockRS, ¤tLine); if (NS_SUCCEEDED(localResult) && currentLine) { currentLine->SetForceInvalidate(PR_TRUE); } } dx = remainingWidth; break; case NS_STYLE_TEXT_ALIGN_LEFT: break; case NS_STYLE_TEXT_ALIGN_JUSTIFY: // If this is not the last line then go ahead and justify the // frames in the line. If it is the last line then if the // direction is right-to-left then we right-align the frames. if (aAllowJustify) { if (!aShrinkWrapWidth) { PRInt32 numSpaces; PRInt32 numLetters; ComputeJustificationWeights(psd, &numSpaces, &numLetters); if (numSpaces > 0) { FrameJustificationState state = { numSpaces, numLetters, remainingWidth, 0, 0, 0, 0, 0 }; ApplyFrameJustification(psd, &state); } } } else if (NS_STYLE_DIRECTION_RTL == psd->mDirection) { // right align the frames dx = remainingWidth; } break; case NS_STYLE_TEXT_ALIGN_CENTER: case NS_STYLE_TEXT_ALIGN_MOZ_CENTER: dx = remainingWidth / 2; break; } #ifdef IBMBIDI PerFrameData* lastPfd = psd->mLastFrame; PerFrameData* bulletPfd = nsnull; if (lastPfd->GetFlag(PFD_ISBULLET) && (NS_STYLE_DIRECTION_RTL == psd->mDirection) ) { bulletPfd = lastPfd; lastPfd = lastPfd->mPrev; } PRUint32 maxX = lastPfd->mBounds.XMost() + dx; PRBool visualRTL = PR_FALSE; if ( (NS_STYLE_DIRECTION_RTL == psd->mDirection) && (!psd->mChangedFrameDirection) ) { psd->mChangedFrameDirection = PR_TRUE; /* Assume that all frames have been right aligned.*/ if (aShrinkWrapWidth) { return PR_FALSE; } visualRTL = mPresContext->IsVisualMode(); if (bulletPfd) { bulletPfd->mBounds.x += maxX; bulletPfd->mFrame->SetRect(bulletPfd->mBounds); } } if ( (0 != dx) || (visualRTL) ) #else if (0 != dx) #endif // IBMBIDI { // If we need to move the frames but we're shrink wrapping, then // we need to wait until the final width is known if (aShrinkWrapWidth) { return PR_FALSE; } for (PerFrameData* pfd = psd->mFirstFrame; pfd #ifdef IBMBIDI && bulletPfd != pfd #endif ; pfd = pfd->mNext) { pfd->mBounds.x += dx; #ifdef IBMBIDI if (visualRTL) { // XXXldb Ugh. Could we handle this earlier so we don't get here? maxX = pfd->mBounds.x = maxX - (pfd->mMargin.left + pfd->mBounds.width + pfd->mMargin.right); } #endif // IBMBIDI pfd->mFrame->SetRect(pfd->mBounds); } aLineBounds.x += dx; } #ifndef IBMBIDI if ((NS_STYLE_DIRECTION_RTL == psd->mDirection) && !psd->mChangedFrameDirection) { psd->mChangedFrameDirection = PR_TRUE; /* Assume that all frames have been right aligned.*/ if (aShrinkWrapWidth) { return PR_FALSE; } PerFrameData* pfd = psd->mFirstFrame; PRUint32 maxX = psd->mRightEdge; while (nsnull != pfd) { pfd->mBounds.x = maxX - (pfd->mMargin.left + pfd->mBounds.width + pfd->mMargin.right); pfd->mFrame->SetRect(pfd->mBounds); maxX = pfd->mBounds.x; pfd = pfd->mNext; } } #endif // ndef IBMBIDI } return PR_TRUE; } void nsLineLayout::RelativePositionFrames(nsRect& aCombinedArea) { RelativePositionFrames(mRootSpan, aCombinedArea); } void nsLineLayout::RelativePositionFrames(PerSpanData* psd, nsRect& aCombinedArea) { nsRect combinedAreaResult; if (nsnull != psd->mFrame) { // The minimum combined area for the frames in a span covers the // entire span frame's overflow area. The span frame might have // overflowing additional non-inline frames (e.g. absolute children // of a relatively positioned span) and we need to make sure their // overflow area, if any, makes it into our final combined area. combinedAreaResult = psd->mFrame->mCombinedArea; } else { // The minimum combined area for the frames that are direct // children of the block starts at the upper left corner of the // line and is sized to match the size of the line's bounding box // (the same size as the values returned from VerticalAlignFrames) combinedAreaResult.x = psd->mLeftEdge; // If this turns out to be negative, the rect will be treated as empty. // Which is just fine. combinedAreaResult.width = psd->mX - combinedAreaResult.x; combinedAreaResult.y = mTopEdge; combinedAreaResult.height = mFinalLineHeight; } for (PerFrameData* pfd = psd->mFirstFrame; pfd; pfd = pfd->mNext) { nsPoint origin = nsPoint(pfd->mBounds.x, pfd->mBounds.y); nsIFrame* frame = pfd->mFrame; // Adjust the origin of the frame if (pfd->GetFlag(PFD_RELATIVEPOS)) { // right and bottom are handled by // nsHTMLReflowState::ComputeRelativeOffsets nsPoint change(pfd->mOffsets.left, pfd->mOffsets.top); frame->SetPosition(frame->GetPosition() + change); origin += change; } // We must position the view correctly before positioning its // descendants so that widgets are positioned properly (since only // some views have widgets). if (frame->HasView()) nsContainerFrame::SyncFrameViewAfterReflow(mPresContext, frame, frame->GetView(), &pfd->mCombinedArea, //ignored NS_FRAME_NO_SIZE_VIEW); // Note: the combined area of a child is in its coordinate // system. We adjust the childs combined area into our coordinate // system before computing the aggregated value by adding in // x and y which were computed above. nsRect spanCombinedArea; nsRect* r = &pfd->mCombinedArea; if (pfd->mSpan) { // Compute a new combined area for the child span before // aggregating it into our combined area. r = &spanCombinedArea; RelativePositionFrames(pfd->mSpan, spanCombinedArea); } else { // If we have something that's not an inline but with a complex frame // hierarchy inside that contains views, they need to be // positioned. // All descendant views must be repositioned even if this frame // does have a view in case this frame's view does not have a // widget and some of the descendant views do have widgets -- // otherwise the widgets won't be repositioned. nsContainerFrame::PositionChildViews(mPresContext, frame); } // Do this here (rather than along with NS_FRAME_OUTSIDE_CHILDREN // handling below) so we get leaf frames as well. No need to worry // about the root span, since it doesn't have a frame. if (frame->HasView()) nsContainerFrame::SyncFrameViewAfterReflow(mPresContext, frame, frame->GetView(), r, NS_FRAME_NO_MOVE_VIEW); combinedAreaResult.UnionRect(combinedAreaResult, *r + origin); } aCombinedArea = combinedAreaResult; // If we just computed a spans combined area, we need to update its // NS_FRAME_OUTSIDE_CHILDREN bit.. if (psd->mFrame) { PerFrameData* spanPFD = psd->mFrame; nsIFrame* frame = spanPFD->mFrame; if ((combinedAreaResult.x < 0) || (combinedAreaResult.y < 0) || (combinedAreaResult.XMost() > spanPFD->mBounds.width) || (combinedAreaResult.YMost() > spanPFD->mBounds.height)) { frame->AddStateBits(NS_FRAME_OUTSIDE_CHILDREN); } else { frame->RemoveStateBits(NS_FRAME_OUTSIDE_CHILDREN); } } } void nsLineLayout::ForgetWordFrame(nsIFrame* aFrame) { if (0 != mWordFrames.GetSize()) { NS_ASSERTION((void*)aFrame == mWordFrames.PeekFront(), "forget-word-frame"); mWordFrames.PopFront(); } } nsIFrame* nsLineLayout::FindNextText(nsIPresContext* aPresContext, nsIFrame* aFrame) { // Grovel through the frame hierarchy to find a text frame that is // "adjacent" to aFrame. // So this is kind of funky. During reflow, overflow frames will // have their parent pointers set up lazily. We assume that, on // entry, aFrame has it's parent pointer set correctly (as do all of // its ancestors). Starting from that, we need to make sure that as // we traverse through frames trying to find the next text frame, we // leave the frames with their parent pointers set correctly, so the // *next* time we come through here, we're good to go. // Build a path from the enclosing block frame down to aFrame. We'll // use this to walk the frame tree. (XXXwaterson if I was clever, I // wouldn't need to build this up before hand, and could incorporate // this logic into the walking code directly.) nsAutoVoidArray stack; for (;;) { stack.InsertElementAt(aFrame, 0); aFrame = aFrame->GetParent(); NS_ASSERTION(aFrame, "wow, no block frame found"); if (! aFrame) break; if (NS_STYLE_DISPLAY_INLINE != aFrame->GetStyleDisplay()->mDisplay) break; } // Using the path we've built up, walk the frame tree looking for // the text frame that follows aFrame. PRInt32 count; while ((count = stack.Count()) != 0) { PRInt32 lastIndex = count - 1; nsIFrame* top = NS_STATIC_CAST(nsIFrame*, stack.ElementAt(lastIndex)); // If this is a frame that'll break a word, then bail. PRBool canContinue; top->CanContinueTextRun(canContinue); if (! canContinue) return nsnull; // Advance to top's next sibling nsIFrame* next = top->GetNextSibling(); if (! next) { // No more siblings. Pop the top element to walk back up the // frame tree. stack.RemoveElementAt(lastIndex); continue; } // We know top's parent is good, but next's might not be. So let's // set it to be sure. next->SetParent(top->GetParent()); // Save next at the top of the stack... stack.ReplaceElementAt(next, lastIndex); // ...and prowl down to next's deepest child. We'll need to check // for potential run-busters "on the way down", too. for (;;) { next->CanContinueTextRun(canContinue); if (! canContinue) return nsnull; nsIFrame* child = next->GetFirstChild(nsnull); if (! child) break; stack.AppendElement(child); next = child; } // Ignore continuing frames if (HasPrevInFlow(next)) continue; // If this is a text frame, return it. if (nsLayoutAtoms::textFrame == next->GetType()) return next; } // If we get here, then there are no more text frames in this block. return nsnull; } PRBool nsLineLayout::TreatFrameAsBlock(nsIFrame* aFrame) { const nsStyleDisplay* display = aFrame->GetStyleDisplay(); if (NS_STYLE_POSITION_ABSOLUTE == display->mPosition) { return PR_FALSE; } if (NS_STYLE_FLOAT_NONE != display->mFloats) { return PR_FALSE; } switch (display->mDisplay) { case NS_STYLE_DISPLAY_BLOCK: case NS_STYLE_DISPLAY_LIST_ITEM: case NS_STYLE_DISPLAY_RUN_IN: case NS_STYLE_DISPLAY_COMPACT: case NS_STYLE_DISPLAY_TABLE: return PR_TRUE; } return PR_FALSE; }