/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* * The contents of this file are subject to the Netscape Public License * Version 1.0 (the "NPL"); you may not use this file except in * compliance with the NPL. You may obtain a copy of the NPL at * http://www.mozilla.org/NPL/ * * Software distributed under the NPL is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL * for the specific language governing rights and limitations under the * NPL. * * The Initial Developer of this code under the NPL is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998 Netscape Communications Corporation. All Rights * Reserved. */ #include "nsIRegistry.h" #include "nsIEnumerator.h" #include "NSReg.h" #include "prmem.h" #include "prlock.h" /*-------------------------------- nsRegistry ---------------------------------- | This class implements the nsIRegistry interface using the functions | | provided by libreg (as declared in mozilla/modules/libreg/include/NSReg.h). | | | | Since that interface is designed to match the libreg function, this class | | is implemented with each member function being a simple wrapper for the | | corresponding libreg function. | ------------------------------------------------------------------------------*/ struct nsRegistry : public nsIRegistry { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIRegistry interface functions. NS_IMETHOD Open( const char *regFile = 0 ); NS_IMETHOD OpenDefault(); NS_IMETHOD Close(); NS_IMETHOD GetString( Key baseKey, const char *path, char **result ); NS_IMETHOD SetString( Key baseKey, const char *path, const char *value ); NS_IMETHOD GetInt( Key baseKey, const char *path, int32 *result ); NS_IMETHOD SetInt( Key baseKey, const char *path, int32 value ); NS_IMETHOD GetBytes( Key baseKey, const char *path, void **result, uint32 *len ); NS_IMETHOD SetBytes( Key baseKey, const char *path, void *value, uint32 len ); NS_IMETHOD GetIntArray( Key baseKey, const char *path, int32 **result, uint32 *len ); NS_IMETHOD SetIntArray( Key baseKey, const char *path, const int32 *value, uint32 len ); NS_IMETHOD AddSubtree( Key baseKey, const char *path, Key *result ); NS_IMETHOD RemoveSubtree( Key baseKey, const char *path ); NS_IMETHOD GetSubtree( Key baseKey, const char *path, Key *result ); NS_IMETHOD AddSubtreeRaw( Key baseKey, const char *path, Key *result ); NS_IMETHOD RemoveSubtreeRaw( Key baseKey, const char *keyname ); NS_IMETHOD GetSubtreeRaw( Key baseKey, const char *path, Key *result ); NS_IMETHOD EnumerateSubtrees( Key baseKey, nsIEnumerator **result ); NS_IMETHOD EnumerateAllSubtrees( Key baseKey, nsIEnumerator **result ); NS_IMETHOD GetValueType( Key baseKey, const char *path, uint32 *result ); NS_IMETHOD GetValueLength( Key baseKey, const char *path, uint32 *result ); NS_IMETHOD EnumerateValues( Key baseKey, nsIEnumerator **result ); NS_IMETHOD GetCurrentUserName( char **result ); NS_IMETHOD SetCurrentUserName( const char *name ); NS_IMETHOD Pack(); // ctor/dtor nsRegistry(); virtual ~nsRegistry(); protected: HREG mReg; // Registry handle. REGERR mErr; // Last libreg error code. PRLock *mregLock; // libreg isn't threadsafe. Use locks to synchronize. }; // nsRegistry #include "nsIFactory.h" /*----------------------------- nsRegistryFactory ------------------------------ | Class factory for nsRegistry objects. | ------------------------------------------------------------------------------*/ struct nsRegistryFactory : public nsIFactory { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // nsIFactory methods NS_IMETHOD CreateInstance(nsISupports *,const nsIID &,void **); NS_IMETHOD LockFactory(PRBool aLock); // ctor nsRegistryFactory(); }; /*--------------------------- nsRegSubtreeEnumerator --------------------------- | This class implements the nsIEnumerator interface and is used to implement | | the nsRegistry EnumerateSubtrees and EnumerateAllSubtrees functions. | ------------------------------------------------------------------------------*/ struct nsRegSubtreeEnumerator : public nsIEnumerator { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIEnumerator interface functions. NS_IMETHOD First(); NS_IMETHOD Next(); NS_IMETHOD CurrentItem(nsISupports **aItem); NS_IMETHOD IsDone(); // ctor/dtor nsRegSubtreeEnumerator( HREG hReg, RKEY rKey, PRBool all ); protected: NS_IMETHOD advance(); // Implementation file; does appropriate NR_RegEnum call. HREG mReg; // Handle to registry we're affiliated with. RKEY mKey; // Base key being enumerated. REGENUM mEnum; // Corresponding libreg "enumerator". REGENUM mNext; // Lookahead value. uint32 mStyle; // Style (indicates all or some); PRBool mDone; // Done flag. REGERR mErr; // Last libreg error code. }; // nsRegSubtreeEnumerator /*--------------------------- nsRegValueEnumerator ----------------------------- | This class is a variation on nsRegSubtreeEnumerator that allocates | | nsRegistryValue objects rather than nsRegistryNode objects. It also | | overrides certain functions to make sure the "value" oriented libreg | | functions used rather than the subtree oriented ones. | ------------------------------------------------------------------------------*/ struct nsRegValueEnumerator : public nsRegSubtreeEnumerator { // Override CurrentItem to allocate nsRegistryValue objects. NS_IMETHOD CurrentItem( nsISupports **result ); // Override advance() to use proper NR_RegEnumEntries. NS_IMETHOD advance(); // ctor/dtor nsRegValueEnumerator( HREG hReg, RKEY rKey ); }; // nsRegValueEnumerator /*------------------------------ nsRegistryNode -------------------------------- | This class implements the nsIRegistryNode interface. Instances are | | allocated by nsRegSubtreeEnumerator::CurrentItem. | ------------------------------------------------------------------------------*/ struct nsRegistryNode : public nsIRegistryNode { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIRegistryNode interface functions. NS_IMETHOD GetName( char **result ); // ctor nsRegistryNode( HREG hReg, RKEY key, REGENUM slot ); protected: HREG mReg; // Handle to registry this node is part of. RKEY mKey; // Key this node is under. REGENUM mEnum; // Copy of corresponding content of parent enumerator. REGERR mErr; // Last libreg error code. char mName[MAXREGPATHLEN]; // Buffer to hold name. }; // nsRegistryNode /*------------------------------ nsRegistryValue ------------------------------- | This class implements the nsIRegistryValue interface. Instances are | | allocated by nsRegValueEnumerator::CurrentItem. | ------------------------------------------------------------------------------*/ struct nsRegistryValue : public nsIRegistryValue { // This class implements the nsISupports interface functions. NS_DECL_ISUPPORTS // This class implements the nsIRegistryValue interface functions. NS_IMETHOD GetName( char **result ); NS_IMETHOD GetValueType( uint32 *result ); NS_IMETHOD GetValueLength( uint32 *result ); // ctor nsRegistryValue( HREG hReg, RKEY key, REGENUM slot ); protected: nsresult getInfo(); // Get registry info. HREG mReg; // Handle to registry this node is part of. RKEY mKey; // Key this node is under. REGENUM mEnum; // Copy of corresponding content of parent enumerator. REGERR mErr; // Last libreg error code. REGINFO mInfo; // Value info. char mName[MAXREGNAMELEN]; // Buffer to hold name. }; // nsRegistryValue /*----------------------------- regerr2nsresult -------------------------------- | This utility function maps a REGERR value to a corresponding nsresult | | error code. | ------------------------------------------------------------------------------*/ static nsresult regerr2nsresult( REGERR err ) { nsresult rv = NS_ERROR_UNEXPECTED; switch( err ) { case REGERR_OK: rv = NS_OK; break; case REGERR_FAIL: rv = NS_ERROR_FAILURE; break; case REGERR_NOMORE: rv = NS_ERROR_REG_NO_MORE; break; case REGERR_NOFIND: rv = NS_ERROR_REG_NOT_FOUND; break; case REGERR_PARAM: case REGERR_BADTYPE: case REGERR_BADNAME: rv = NS_ERROR_INVALID_ARG; break; case REGERR_NOFILE: rv = NS_ERROR_REG_NOFILE; break; case REGERR_MEMORY: rv = NS_ERROR_OUT_OF_MEMORY; break; case REGERR_BUFTOOSMALL: rv = NS_ERROR_REG_BUFFER_TOO_SMALL; break; case REGERR_NAMETOOLONG: rv = NS_ERROR_REG_NAME_TOO_LONG; break; case REGERR_NOPATH: rv = NS_ERROR_REG_NO_PATH; break; case REGERR_READONLY: rv = NS_ERROR_REG_READ_ONLY; break; case REGERR_BADUTF8: rv = NS_ERROR_REG_BAD_UTF8; break; } return rv; } /*----------------------------- reginfo2DataType ------------------------------- | This utility function converts the type field in the REGINFO structure to | | the corresponding nsIRegistry::DataType value. | ------------------------------------------------------------------------------*/ static void reginfo2DataType( const REGINFO &in, uint32 &out ) { // Transfer information, based on entry type. switch( in.entryType ) { case REGTYPE_ENTRY_STRING_UTF: out = nsIRegistry::String; //out.length = in.entryLength; break; case REGTYPE_ENTRY_INT32_ARRAY: out = nsIRegistry::Int32; // Convert length in bytes to array dimension. //out.length = in.entryLength / sizeof(int32); break; case REGTYPE_ENTRY_BYTES: out = nsIRegistry::Bytes; //out.length = in.entryLength; break; case REGTYPE_ENTRY_FILE: out = nsIRegistry::File; //out.length = in.entryLength; break; } } /*----------------------------- reginfo2DataType ------------------------------- | This utility function converts the length field in the REGINFO structure to | | the proper units (if type==Int32 array, we divide by sizeof(int32)). | ------------------------------------------------------------------------------*/ static void reginfo2Length( const REGINFO &in, uint32 &out ) { // Transfer information, based on entry type. switch( in.entryType ) { case REGTYPE_ENTRY_STRING_UTF: out = in.entryLength; break; case REGTYPE_ENTRY_INT32_ARRAY: // Convert length in bytes to array dimension. out = in.entryLength / sizeof(int32); break; case REGTYPE_ENTRY_BYTES: out = in.entryLength; break; case REGTYPE_ENTRY_FILE: out = in.entryLength; break; } } /*----------------------------------- IIDs ------------------------------------- | Static IID values for each imterface implemented here; required by the | | NS_IMPL_ISUPPORTS macro. | ------------------------------------------------------------------------------*/ static NS_DEFINE_IID(kISupportsIID, NS_ISUPPORTS_IID); static NS_DEFINE_IID(kIRegistryIID, NS_IREGISTRY_IID); static NS_DEFINE_IID(kIRegistryNodeIID, NS_IREGISTRYNODE_IID); static NS_DEFINE_IID(kIRegistryValueIID, NS_IREGISTRYVALUE_IID); static NS_DEFINE_IID(kIEnumeratorIID, NS_IENUMERATOR_IID); static NS_DEFINE_IID(kIFactoryIID, NS_IFACTORY_IID); /*------------------------ nsISupports Implementation -------------------------- | This code generates the implementation of the nsISupports member functions | | for each class implemented in this file. | ------------------------------------------------------------------------------*/ NS_IMPL_ISUPPORTS( nsRegistry, kIRegistryIID ); NS_IMPL_ISUPPORTS( nsRegSubtreeEnumerator, kIEnumeratorIID ); NS_IMPL_ISUPPORTS( nsRegistryNode, kIRegistryNodeIID ); NS_IMPL_ISUPPORTS( nsRegistryValue, kIRegistryValueIID ); /*-------------------------- nsRegistry::nsRegistry ---------------------------- | Vanilla nsRegistry constructor. The first time called, it does | | NR_StartupRegistry. | ------------------------------------------------------------------------------*/ nsRegistry::nsRegistry() : mReg( 0 ) { NS_INIT_REFCNT(); // Ensure libreg is started. static PRBool libregStarted = PR_FALSE; if( !libregStarted ) { NR_StartupRegistry(); libregStarted = PR_TRUE; } mregLock = PR_NewLock(); return; } /*------------------------- nsRegistry::~nsRegistry ---------------------------- | The dtor closes the registry file(if open). | ------------------------------------------------------------------------------*/ nsRegistry::~nsRegistry() { if( mReg ) { Close(); } if (mregLock) { PR_DestroyLock(mregLock); } return; } /*----------------------------- nsRegistry::Open ------------------------------- | If the argument is null, delegate to OpenDefault, else open the registry | | file. We first check to see if a registry file is already open and close | | it if so. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Open( const char *regFile ) { // Check for default. if( !regFile ) { return OpenDefault(); } // Ensure existing registry is closed. Close(); // Open specified registry. PR_Lock(mregLock); mErr = NR_RegOpen((char*)regFile, &mReg ); PR_Unlock(mregLock); // Convert the result. return regerr2nsresult( mErr ); } /*-------------------------- nsRegistry::OpenDefault --------------------------- | Open the "default" registry; in the case of this libreg-based implementation | | that is done by passing a null file name pointer to NR_RegOpen. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::OpenDefault() { // Ensure existing registry is closed. Close(); // Open default registry. PR_Lock(mregLock); mErr = NR_RegOpen( 0, &mReg ); PR_Unlock(mregLock); // Convert the result. return regerr2nsresult( mErr ); } /*----------------------------- nsRegistry::Close ------------------------------ | Tests the mReg handle and if non-null, closes the registry via NR_RegClose. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Close() { mErr = REGERR_OK; if( mReg ) { PR_Lock(mregLock); mErr = NR_RegClose( mReg ); PR_Unlock(mregLock); mReg = 0; } return regerr2nsresult( mErr ); } /*--------------------------- nsRegistry::GetString ---------------------------- | First, look for the entry using GetValueInfo. If found, and it's a string, | | allocate space for it and fetch the value. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetString( Key baseKey, const char *path, char **result ) { nsresult rv = NS_OK; // Make sure caller gave us place for result. if( result ) { *result = 0; // Clear result. // Get info about the requested entry. uint32 type, length; rv = GetValueType( baseKey, path, &type ); if ( rv == NS_OK ) { rv = GetValueLength( baseKey, path, &length ); } // See if that worked. if( rv == NS_OK ) { // Make sure the entry is a string. if( type == String ) { // Allocate space for result. *result =(char*)PR_Malloc( length + 1 ); if( *result ) { // Get string from registry into result buffer. PR_Lock(mregLock); mErr = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, *result, length+1 ); PR_Unlock(mregLock); // Convert status. rv = regerr2nsresult( mErr ); // Test result. if( rv != NS_OK ) { // Didn't get result, free buffer. PR_Free( *result ); *result = 0; } } else { // Couldn't allocate buffer. rv = NS_ERROR_OUT_OF_MEMORY; } } else { // They asked for the wrong type of value. rv = regerr2nsresult( REGERR_BADTYPE ); } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*--------------------------- nsRegistry::SetString ---------------------------- | Simply sets the registry contents using NR_RegSetEntryString. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetString( Key baseKey, const char *path, const char *value ) { nsresult rv = NS_OK; // Set the contents. PR_Lock(mregLock); mErr = NR_RegSetEntryString( mReg,(RKEY)baseKey,(char*)path,(char*)value ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*---------------------------- nsRegistry::GetInt ------------------------------ | This function is just shorthand for fetching a 1-element int32 array. We | | implement it "manually" using NR_RegGetEntry(versus calling GetIntArray) | | to save allocating a copy of the result. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetInt( Key baseKey, const char *path, int32 *result ) { nsresult rv = NS_OK; // Make sure caller gave us place for result. if( result ) { // Get info about the requested entry. uint32 type; rv = GetValueType( baseKey, path, &type ); // See if that worked. if( rv == NS_OK ) { // Make sure the entry is an int32 array. if( type == Int32 ) { uint32 len = sizeof *result; // Get int from registry into result field. PR_Lock(mregLock); mErr = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path, result, &len ); PR_Unlock(mregLock); // Convert status. rv = regerr2nsresult( mErr ); } else { // They asked for the wrong type of value. rv = NS_ERROR_REG_BADTYPE; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------------- nsRegistry::SetInt ------------------------------ | Write out the value as a one-element int32 array, using NR_RegSetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetInt( Key baseKey, const char *path, int32 value ) { nsresult rv = NS_OK; // Set the contents. PR_Lock(mregLock); mErr = NR_RegSetEntry( mReg, (RKEY)baseKey, (char*)path, REGTYPE_ENTRY_INT32_ARRAY, &value, sizeof value ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*--------------------------- nsRegistry::GetBytes ----------------------------- | Get the registry contents at specified location using NR_RegGetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetBytes( Key baseKey, const char *path, void **result, uint32 *len ) { nsresult rv = NS_OK; // Make sure caller gave us place for result. if( result && len ) { // Get info about the requested entry. uint32 type; rv = GetValueType( baseKey, path, &type ); // See if that worked. if( rv == NS_OK ) { // Make sure the entry is bytes. if( type == Bytes ) { // Get bytes from registry into result field. *result = PR_Malloc(*len); PR_Lock(mregLock); mErr = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path, *result, len ); PR_Unlock(mregLock); // Convert status. rv = regerr2nsresult( mErr ); } else { // They asked for the wrong type of value. rv = NS_ERROR_REG_BADTYPE; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*--------------------------- nsRegistry::SetBytes ----------------------------- | Set the contents at the specified registry location, using NR_RegSetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetBytes( Key baseKey, const char *path, void *value, uint32 len ) { nsresult rv = NS_OK; // Set contents. PR_Lock(mregLock); mErr = NR_RegSetEntry( mReg,(RKEY)baseKey,(char*)path, REGTYPE_ENTRY_BYTES, value, len ); PR_Unlock(mregLock); // Convert result; rv = regerr2nsresult( mErr ); return rv; } /*-------------------------- nsRegistry::GetIntArray --------------------------- | Find out about the entry using GetValueInfo. We check the type and then | | use NR_RegGetEntry to get the actual array. We have to convert from the | | array dimension to number of bytes in the process. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetIntArray( Key baseKey, const char *path, int32 **result, uint32 *len ) { nsresult rv = NS_OK; // Make sure caller gave us place for result. if( result && len ) { // Get info about the requested entry. uint32 type, length; rv = GetValueType( baseKey, path, &type ); if ( rv == NS_OK ) { rv = GetValueLength( baseKey, path, &length ); } // See if that worked. if( rv == NS_OK ) { // Make sure the entry is bytes. if( type == Int32 ) { // Allocate space for result. *len = length * sizeof(int32); *result =(int32*)PR_Malloc( *len ); // Make sure that worked. if( *result ) { // Get array from registry into result field. PR_Lock(mregLock); mErr = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path, *result, len ); PR_Unlock(mregLock); // Convert status. if( mErr == REGERR_OK ) { // Convert size in bytes to array dimension. *len /= sizeof(int32); } else { rv = regerr2nsresult( mErr ); // Free buffer that we allocated(error will tell caller not to). PR_Free( *result ); *result = 0; } } else { rv = NS_ERROR_OUT_OF_MEMORY; } } else { // They asked for the wrong type of value. rv = NS_ERROR_REG_BADTYPE; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*-------------------------- nsRegistry::SetIntArray --------------------------- | Store the given integer array at the given point in the registry. The | | length given is the size of the array, we have to convert that to the | | size in bytes in order to use NR_RegSetEntry. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetIntArray( Key baseKey, const char *path, const int32 *value, uint32 len ) { nsresult rv = NS_OK; // Convert array dimension to byte count. uint32 size = len * sizeof(int32); // Set contents. PR_Lock(mregLock); mErr = NR_RegSetEntry( mReg,(RKEY)baseKey,(char*)path, REGTYPE_ENTRY_INT32_ARRAY,(void*)value, size ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*-------------------------- nsRegistry::AddSubtree ---------------------------- | Add a new registry subkey with the specified name, using NR_RegAddKey. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::AddSubtree( Key baseKey, const char *path, Key *result ) { nsresult rv = NS_OK; // Add the subkey. PR_Lock(mregLock); mErr = NR_RegAddKey( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*-------------------------- nsRegistry::AddSubtreeRaw-------------------------- | Add a new registry subkey with the specified name, using NR_RegAddKeyRaw | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::AddSubtreeRaw( Key baseKey, const char *path, Key *result ) { nsresult rv = NS_OK; // Add the subkey. PR_Lock(mregLock); mErr = NR_RegAddKeyRaw( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*------------------------- nsRegistry::RemoveSubtree -------------------------- | Deletes the subtree at a given location using NR_RegDeleteKey. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::RemoveSubtree( Key baseKey, const char *path ) { nsresult rv = NS_OK; // Delete the subkey. PR_Lock(mregLock); mErr = NR_RegDeleteKey( mReg,(RKEY)baseKey,(char*)path ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*------------------------- nsRegistry::RemoveSubtreeRaw ----------------------- | Deletes the subtree at a given location using NR_RegDeleteKeyRaw | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::RemoveSubtreeRaw( Key baseKey, const char *keyname ) { nsresult rv = NS_OK; // libreg doesn't delete keys if there are subkeys under the key // Hence we have to recurse through to delete the subtree RKEY key; char subkeyname[MAXREGPATHLEN+1]; int n = sizeof(subkeyname); REGENUM state = 0; PR_Lock(mregLock); REGERR err = NR_RegGetKeyRaw(mReg, baseKey, (char *)keyname, &key); PR_Unlock(mregLock); if (err != REGERR_OK) { rv = regerr2nsresult( err ); return rv; } // Now recurse through and delete all keys under hierarchy subkeyname[0] = '\0'; while (NR_RegEnumSubkeys(mReg, key, &state, subkeyname, n, REGENUM_NORMAL) == REGERR_OK) { #ifdef DEBUG_dp printf("...recursing into %s\n", subkeyname); #endif /* DEBUG_dp */ err = RemoveSubtreeRaw(key, subkeyname); if (err != REGERR_OK) break; } // If success in deleting all subkeys, delete this key too if (err == REGERR_OK) { #ifdef DEBUG_dp printf("...deleting %s\n", keyname); #endif /* DEBUG_dp */ PR_Lock(mregLock); err = NR_RegDeleteKeyRaw(mReg, baseKey, (char *)keyname); PR_Unlock(mregLock); } // Convert result. rv = regerr2nsresult( err ); return rv; } /*-------------------------- nsRegistry::GetSubtree ---------------------------- | Returns a nsIRegistry::Key(RKEY) for a given key/path. The key is | | obtained using NR_RegGetKey. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetSubtree( Key baseKey, const char *path, Key *result ) { nsresult rv = NS_OK; // Make sure we have a place for the result. if( result ) { // Get key. mErr = NR_RegGetKey( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); // Convert result. rv = regerr2nsresult( mErr ); } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*-------------------------- nsRegistry::GetSubtreeRaw-------------------------- | Returns a nsIRegistry::Key(RKEY) for a given key/path. The key is | | obtained using NR_RegGetKeyRaw. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetSubtreeRaw( Key baseKey, const char *path, Key *result ) { nsresult rv = NS_OK; // Make sure we have a place for the result. if( result ) { // Get key. PR_Lock(mregLock); mErr = NR_RegGetKeyRaw( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*----------------------- nsRegistry::EnumerateSubtrees ------------------------ | Allocate a nsRegSubtreeEnumerator object and return it to the caller. | | We construct the enumerator using the registry handle from this registry | | object, the user-specified registry key, and indicate that we don't want | | to recurse down subtrees. No libreg functions are invoked at this point | |(that will happen when the enumerator member functions are called). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::EnumerateSubtrees( Key baseKey, nsIEnumerator **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { *result = new nsRegSubtreeEnumerator( mReg,(RKEY)baseKey, PR_FALSE ); // Check for success. if( *result ) { // Bump refcnt on behalf of caller. (*result)->AddRef(); } else { // Unable to allocate space for the enumerator object. rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*--------------------- nsRegistry::EnumerateAllSubtrees ----------------------- | Same as EnumerateSubtrees but we pass PR_TRUE to request that the | | enumerator object descend subtrees when it is used. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::EnumerateAllSubtrees( Key baseKey, nsIEnumerator **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { *result = new nsRegSubtreeEnumerator( mReg,(RKEY)baseKey, PR_TRUE ); // Check for success. if( *result ) { // Bump refcnt on behalf of caller. (*result)->AddRef(); } else { // Unable to allocate space for the enumerator object. rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------- nsRegistry::GetValueType --------------------------- | Gets the type from the registry using the NR_GetEntryInfo libreg API. | | The result is transferred to the uint32 value passed in (with conversion | | to the appropriate nsIRegistry::DataType value). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetValueType( Key baseKey, const char *path, uint32 *result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { // Get registry info into local structure. REGINFO info = { sizeof info, 0, 0 }; PR_Lock(mregLock); mErr = NR_RegGetEntryInfo( mReg,(RKEY)baseKey,(char*)path, &info ); PR_Unlock(mregLock); if( mErr == REGERR_OK ) { // Copy info to user's result value. reginfo2DataType( info, *result ); } else { rv = regerr2nsresult( mErr ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------ nsRegistry::GetValueLength -------------------------- | Gets the registry value info via NR_RegGetEntryInfo. The length is | | converted to the proper "units" via reginfo2Length. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetValueLength( Key baseKey, const char *path, uint32 *result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { // Get registry info into local structure. REGINFO info = { sizeof info, 0, 0 }; PR_Lock(mregLock); mErr = NR_RegGetEntryInfo( mReg,(RKEY)baseKey,(char*)path, &info ); PR_Unlock(mregLock); if( mErr == REGERR_OK ) { // Copy info to user's result value. reginfo2Length( info, *result ); } else { rv = regerr2nsresult( mErr ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------ nsRegistry::EnumerateValues ------------------------- | Allocates and returns an instance of nsRegValueEnumerator constructed in | | a similar fashion as the nsRegSubtreeEnumerator is allocated/returned by | | EnumerateSubtrees. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::EnumerateValues( Key baseKey, nsIEnumerator **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { *result = new nsRegValueEnumerator( mReg,(RKEY)baseKey ); // Check for success. if( *result ) { // Bump refcnt on behalf of caller. (*result)->AddRef(); } else { // Unable to allocate space for the enumerator object. rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegistry::GetCurrentUserName ------------------------ | Simple wrapper for NR_RegGetUsername. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::GetCurrentUserName( char **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { // Get the user name. PR_Lock(mregLock); mErr = NR_RegGetUsername( result ); PR_Unlock(mregLock); // Convert the result. rv = regerr2nsresult( mErr ); } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegistry::SetCurrentUserName ------------------------ | Simple wrapper for NR_RegSetUsername. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::SetCurrentUserName( const char *name ) { nsresult rv = NS_OK; // Set the user name. PR_Lock(mregLock); mErr = NR_RegSetUsername( name ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*----------------------------- nsRegistry::Pack ------------------------------- | Simple wrapper for NR_RegPack. We don't set up any callback. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistry::Pack() { nsresult rv = NS_OK; // Pack the registry. PR_Lock(mregLock); mErr = NR_RegPack( mReg, 0, 0 ); PR_Unlock(mregLock); // Convert result. rv = regerr2nsresult( mErr ); return rv; } /*-------------- nsRegSubtreeEnumerator::nsRegSubtreeEnumerator ---------------- | The ctor simply stashes all the information that will be needed to enumerate | | the subkeys. | ------------------------------------------------------------------------------*/ nsRegSubtreeEnumerator::nsRegSubtreeEnumerator( HREG hReg, RKEY rKey, PRBool all ) : mReg( hReg ), mKey( rKey ), mEnum( 0 ), mNext( 0 ), mStyle( all ? REGENUM_DESCEND : 0 ), mDone( PR_FALSE ), mErr( -1 ) { NS_INIT_REFCNT(); return; } /*----------------------- nsRegSubtreeEnumerator::First ------------------------ | Set mEnum to 0; this will cause the next NR_RegEnum call to go to | | the beginning. We then do a Next() call in order to do a "lookahead" to | | properly detect an empty list (i.e., set the mDone flag). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::First() { nsresult rv = NS_OK; // Reset "done" flag. mDone = PR_FALSE; // Go to beginning. mEnum = mNext = 0; // Lookahead so mDone flag gets set for empty list. rv = Next(); return rv; } /*----------------------- nsRegSubtreeEnumerator::Next ------------------------- | First, we check if we've already advanced to the end by checking the mDone | | flag. | | | | We advance mEnum to the next enumeration value which is in the mNext | | lookahead buffer. We must then call advance to lookahead and properly set | | the isDone flag. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::Next() { nsresult rv = NS_OK; // Check for at end. if ( !mDone ) { // Advance to next spot. mEnum = mNext; // Lookahead so mDone is properly set (and to update mNext). rv = advance(); } else { // Set result accordingly. rv = regerr2nsresult( REGERR_NOMORE ); } return rv; } /*---------------------- nsRegSubtreeEnumerator::advance ----------------------- | Advance mNext to next subkey using NR_RegEnumSubkeys. We set mDone if | | there are no more subkeys. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::advance() { char name[MAXREGPATHLEN]; uint32 len = sizeof name; mErr = NR_RegEnumSubkeys( mReg, mKey, &mNext, name, len, mStyle ); // See if we ran off end. if( mErr == REGERR_NOMORE ) { // Remember we've run off end. mDone = PR_TRUE; } // Convert result. nsresult rv = regerr2nsresult( mErr ); return rv; }; /*-------------------- nsRegSubtreeEnumerator::CurrentItem --------------------- | Allocates and returns a new instance of class nsRegistryNode. The node | | object will hold the curent mEnum value so it can obtain its name from | | the registry when asked. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::CurrentItem( nsISupports **result) { nsresult rv = NS_OK; // Make sure there is a place to put the result. if( result ) { *result = new nsRegistryNode( mReg, mKey, mEnum ); if( *result ) { (*result)->AddRef(); } else { rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegSubtreeEnumerator::IsDone ------------------------ | Simply return mDone. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegSubtreeEnumerator::IsDone() { nsresult rv = mDone; return rv; } /*---------------- nsRegValueEnumerator::nsRegValueEnumerator ------------------ | Delegates everything to the base class constructor. | ------------------------------------------------------------------------------*/ nsRegValueEnumerator::nsRegValueEnumerator( HREG hReg, RKEY rKey ) : nsRegSubtreeEnumerator( hReg, rKey, PR_FALSE ) { return; } /*--------------------- nsRegValueEnumerator::CurrentItem ---------------------- | As the nsRegSubtreeEnumerator counterpart, but allocates an object of | | class nsRegistryValue. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegValueEnumerator::CurrentItem( nsISupports **result ) { nsresult rv = NS_OK; // Make sure there is a place to put the result. if( result ) { *result = new nsRegistryValue( mReg, mKey, mEnum ); if( *result ) { (*result)->AddRef(); } else { rv = NS_ERROR_OUT_OF_MEMORY; } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*----------------------- nsRegValueEnumerator::advance ------------------------ | Advance mNext to next subkey using NR_RegEnumEntries. We set mDone if | | there are no more entries. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegValueEnumerator::advance() { char name[MAXREGNAMELEN]; uint32 len = sizeof name; REGINFO info = { sizeof info, 0, 0 }; mErr = NR_RegEnumEntries( mReg, mKey, &mNext, name, len, &info ); // See if we ran off end. if( mErr == REGERR_NOMORE ) { // Remember we've run off end. mDone = PR_TRUE; } // Convert result. nsresult rv = regerr2nsresult( mErr ); return rv; }; /*---------------------- nsRegistryNode::nsRegistryNode ------------------------ | Store the arguments in the corresponding data members and initialize | | the other data members. We defer the libreg calls till we're asked for | | our name. We use mErr==-1 to indicate we haven't fetched the name yet. | ------------------------------------------------------------------------------*/ nsRegistryNode::nsRegistryNode( HREG hReg, RKEY key, REGENUM slot ) : mReg( hReg ), mKey( key ), mEnum( slot ), mErr( -1 ) { NS_INIT_REFCNT(); return; } /*-------------------------------- PR_strdup ----------------------------------- | Utility function that does PR_Malloc and copies argument string. Caller | | must do PR_Free. | ------------------------------------------------------------------------------*/ static char *PR_strdup( const char *in ) { char *result = (char*)PR_Malloc( strlen( in ) + 1 ); if ( result ) { strcpy( result, in ); } return result; } /*-------------------------- nsRegistryNode::GetName --------------------------- | If we haven't fetched it yet, get the name of the corresponding subkey now, | | using NR_RegEnumSubkeys. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryNode::GetName( char **result ) { nsresult rv = NS_OK; // Make sure there is a place to put the result. if( result ) { // Test whether we haven't tried to get it yet. if( mErr == -1 ) { REGENUM temp = mEnum; // Get name. mErr = NR_RegEnumSubkeys( mReg, mKey, &temp, mName, sizeof mName, PR_FALSE ); } // Convert result from prior libreg call. rv = regerr2nsresult( mErr ); if( rv == NS_OK || rv == NS_ERROR_REG_NO_MORE ) { // worked, return actual result. *result = PR_strdup( mName ); if ( *result ) { rv = NS_OK; } else { rv = NS_ERROR_OUT_OF_MEMORY; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*--------------------- nsRegistryValue::nsRegistryValue ----------------------- | Implemented the same way as the nsRegistryNode ctor. | ------------------------------------------------------------------------------*/ nsRegistryValue::nsRegistryValue( HREG hReg, RKEY key, REGENUM slot ) : mReg( hReg ), mKey( key ), mEnum( slot ), mErr( -1 ) { NS_INIT_REFCNT(); return; } /*------------------------- nsRegistryValue::GetName --------------------------- | See nsRegistryNode::GetName; we use NR_RegEnumEntries in this case. | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetName( char **result ) { nsresult rv = NS_OK; // Make sure we have a place to put the result. if( result ) { // Ensure we've got the info we need. rv = getInfo(); if( rv == NS_OK || rv == NS_ERROR_REG_NO_MORE ) { // worked, return actual result. *result = PR_strdup( mName ); if ( *result ) { rv = NS_OK; } else { rv = NS_ERROR_OUT_OF_MEMORY; } } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*----------------------- nsRegistryValue::GetValueType ------------------------ | We test if we've got the info already. If not, we git it by calling | | getInfo. We calculate the result by converting the REGINFO type field to | | a nsIRegistry::DataType value (using reginfo2DataType). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetValueType( uint32 *result ) { nsresult rv = NS_OK; // Make sure we have room for th result. if( result ) { // Make sure we've got the info we need. rv = getInfo(); // Check if it worked. if( rv == NS_OK ) { // Convert result from REGINFO to nsIRegistry::ValueInfo. reginfo2DataType( mInfo, *result ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*---------------------- nsRegistryValue::GetValueLength ----------------------- | We test if we've got the info already. If not, we git it by calling | | getInfo. We calculate the result by converting the REGINFO type field to | | a nsIRegistry::DataType value (using reginfo2Length). | ------------------------------------------------------------------------------*/ NS_IMETHODIMP nsRegistryValue::GetValueLength( uint32 *result ) { nsresult rv = NS_OK; // Make sure we have room for th result. if( result ) { // Make sure we've got the info we need. rv = getInfo(); // Check if it worked. if( rv == NS_OK ) { // Convert result from REGINFO to length. reginfo2Length( mInfo, *result ); } } else { rv = NS_ERROR_NULL_POINTER; } return rv; } /*------------------------- nsRegistryValue::getInfo --------------------------- | Call NR_RegEnumEntries to set the mInfo/mName data members. | ------------------------------------------------------------------------------*/ nsresult nsRegistryValue::getInfo() { nsresult rv = NS_OK; // Test whether we haven't tried to get it yet. if( mErr == -1 ) { REGENUM temp = mEnum; // Get name and info. mErr = NR_RegEnumEntries( mReg, mKey, &temp, mName, sizeof mName, &mInfo ); // Convert result. rv = regerr2nsresult( mErr ); } return rv; } nsRegistryFactory::nsRegistryFactory() { NS_INIT_REFCNT(); } NS_IMPL_ISUPPORTS(nsRegistryFactory, kIFactoryIID); NS_IMETHODIMP nsRegistryFactory::CreateInstance(nsISupports *aOuter, const nsIID &aIID, void **aResult) { nsresult rv = NS_OK; nsRegistry* newRegistry; if(aResult == NULL) { return NS_ERROR_NULL_POINTER; } else { *aResult = NULL; } if(0 != aOuter) { return NS_ERROR_NO_AGGREGATION; } NS_NEWXPCOM(newRegistry, nsRegistry); if(newRegistry == NULL) { return NS_ERROR_OUT_OF_MEMORY; } NS_ADDREF(newRegistry); rv = newRegistry->QueryInterface(aIID, aResult); NS_RELEASE(newRegistry); return rv; } nsresult nsRegistryFactory::LockFactory(PRBool aLock) { // Not implemented in simplest case. return NS_OK; } // This is a temporary hack; needs work to support dynamic binding // via nsComponentManager and support for multiple factories per DLL. extern "C" NS_EXPORT nsresult NS_RegistryGetFactory(nsISupports* servMgr, nsIFactory** aFactory ) { nsresult rv = NS_OK; if( aFactory == 0 ) { return NS_ERROR_NULL_POINTER; } else { *aFactory = 0; } nsIFactory* inst = new nsRegistryFactory(); if(0 == inst) { rv = NS_ERROR_OUT_OF_MEMORY; } else { NS_ADDREF(inst); *aFactory = inst; } return rv; }