dnl -*- Mode: Autoconf; tab-width: 4; indent-tabs-mode: nil; -*- dnl dnl ***** BEGIN LICENSE BLOCK ***** dnl Version: MPL 1.1/GPL 2.0/LGPL 2.1 dnl dnl The contents of this file are subject to the Mozilla Public License Version dnl 1.1 (the "License"); you may not use this file except in compliance with dnl the License. You may obtain a copy of the License at dnl http://www.mozilla.org/MPL/ dnl dnl Software distributed under the License is distributed on an "AS IS" basis, dnl WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License dnl for the specific language governing rights and limitations under the dnl License. dnl dnl The Original Code is the Netscape Portable Runtime (NSPR). dnl dnl The Initial Developer of the Original Code is dnl Netscape Communications Corporation. dnl Portions created by the Initial Developer are Copyright (C) 1998 dnl the Initial Developer. All Rights Reserved. dnl dnl Contributor(s): dnl Christopher Seawood <cls@seawood.org> dnl Howard Chu <hyc@symas.com> dnl Mark Mentovai <mark@moxienet.com> dnl dnl Alternatively, the contents of this file may be used under the terms of dnl either the GNU General Public License Version 2 or later (the "GPL"), or dnl the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), dnl in which case the provisions of the GPL or the LGPL are applicable instead dnl of those above. If you wish to allow use of your version of this file only dnl under the terms of either the GPL or the LGPL, and not to allow others to dnl use your version of this file under the terms of the MPL, indicate your dnl decision by deleting the provisions above and replace them with the notice dnl and other provisions required by the GPL or the LGPL. If you do not delete dnl the provisions above, a recipient may use your version of this file under dnl the terms of any one of the MPL, the GPL or the LGPL. dnl dnl ***** END LICENSE BLOCK ***** AC_PREREQ(2.12) AC_INIT(config/libc_r.h) AC_CONFIG_AUX_DIR(${srcdir}/build/autoconf) AC_CANONICAL_SYSTEM dnl ======================================================== dnl = Defaults dnl ======================================================== MOD_MAJOR_VERSION=4 MOD_MINOR_VERSION=9 MOD_PATCH_VERSION=0 NSPR_MODNAME=nspr20 _HAVE_PTHREADS= USE_PTHREADS= USE_USER_PTHREADS= USE_NSPR_THREADS= USE_N32= USE_64= USE_CPLUS= USE_IPV6= USE_MDUPDATE= _MACOSX_DEPLOYMENT_TARGET= _OPTIMIZE_FLAGS=-O _DEBUG_FLAGS=-g MOZ_DEBUG=1 MOZ_OPTIMIZE= OBJDIR='$(OBJDIR_NAME)' OBJDIR_NAME=. OBJDIR_SUFFIX=OBJ NSINSTALL='$(MOD_DEPTH)/config/$(OBJDIR_NAME)/nsinstall' NOSUCHFILE=/no-such-file LIBNSPR='-L$(dist_libdir) -lnspr$(MOD_MAJOR_VERSION)' LIBPLC='-L$(dist_libdir) -lplc$(MOD_MAJOR_VERSION)' CYGWIN_WRAPPER= MACOS_SDK_DIR= NEXT_ROOT= MT= MOZ_OS2_HIGH_MEMORY=1 PROFILE_GEN_CFLAGS= PROFILE_GEN_LDFLAGS= PROFILE_USE_CFLAGS= PROFILE_USE_LDFLAGS= dnl Link in libraries necessary to resolve all symbols for shared libs RESOLVE_LINK_SYMBOLS= dnl ======================================================== dnl = dnl = Dont change the following lines. Doing so breaks: dnl = dnl = CFLAGS="-foo" ./configure dnl = dnl ======================================================== CFLAGS="${CFLAGS=}" CXXFLAGS="${CXXFLAGS=}" LDFLAGS="${LDFLAGS=}" DLLFLAGS="${DLLFLAGS=}" HOST_CFLAGS="${HOST_CFLAGS=}" HOST_LDFLAGS="${HOST_LDFLAGS=}" case "$target" in *-cygwin*|*-mingw*) # Check to see if we are really running in a msvc environemnt _WIN32_MSVC= AC_CHECK_PROGS(CC, cl) if test "$CC" = "cl"; then echo 'main() { return 0; }' > dummy.c ${CC} -o dummy dummy.c >/dev/null 2>&1 if test $? = 0; then _WIN32_MSVC=1 CXX=$CC else AC_MSG_WARN([$(CC) test failed. Using normal feature tests]) fi rm -f dummy dummy.o dummy.obj dummy.exe dummy.c fi ;; *-msvc*) _WIN32_MSVC=1 ;; *-mks*) _WIN32_MSVC=1 ;; esac if test -n "$_WIN32_MSVC"; then SKIP_PATH_CHECKS=1 SKIP_COMPILER_CHECKS=1 SKIP_LIBRARY_CHECKS=1 fi dnl ======================================================== dnl = Android uses a very custom (hacky) toolchain; we need to do this dnl = here, so that the compiler checks can succeed dnl ======================================================== AC_ARG_WITH(android-ndk, [ --with-android-ndk=DIR location where the Android NDK can be found], android_ndk=$withval) AC_ARG_WITH(android-toolchain, [ --with-android-toolchain=DIR location of the android toolchain, default NDK/build/prebuilt/HOST/arm-eabi-4.4.0], android_toolchain=$withval) AC_ARG_WITH(android-platform, [ --with-android-platform=DIR location of platform dir, default NDK/build/platforms/android-5/arch-arm], android_platform=$withval) case "$target" in arm-linux*-android*|*-linuxandroid*) android_tool_prefix="arm-linux-androideabi" ;; arm-android-eabi) android_tool_prefix="arm-eabi" ;; i?86-*android*) android_tool_prefix="i686-android-linux" ;; *) android_tool_prefix="$target_os" ;; esac dnl ======================================================== dnl = Gonk is a fork of Android used for Mozilla's B2G project. dnl = Configuration is done largely by the top level config dnl = and the specified gonk directory doesn't matter here. dnl ======================================================== AC_ARG_WITH(gonk, [ --with-gonk=DIR location of gonk dir], gonkdir=$withval) if test -n "$gonkdir" ; then dnl Most things are directly configured by env vars when building for gonk dnl prevent cross compile section from using these flags as host flags if test -z "$HOST_CPPFLAGS" ; then HOST_CPPFLAGS=" " fi if test -z "$HOST_CFLAGS" ; then HOST_CFLAGS=" " fi if test -z "$HOST_CXXFLAGS" ; then HOST_CXXFLAGS=" " fi if test -z "$HOST_LDFLAGS" ; then HOST_LDFLAGS=" " fi AC_DEFINE(ANDROID) else case "$target" in *-android*|*-linuxandroid*) if test -z "$android_ndk" ; then AC_MSG_ERROR([You must specify --with-android-ndk=/path/to/ndk when targeting Android.]) fi if test -z "$android_toolchain" ; then AC_MSG_CHECKING([for android toolchain directory]) kernel_name=`uname -s | tr "[[:upper:]]" "[[:lower:]]"` android_toolchain="$android_ndk"/build/prebuilt/$kernel_name-x86/arm-eabi-4.4.0 # With newer NDK, the toolchain path has changed. if ! test -d "$android_toolchain" ; then android_toolchain="$android_ndk"/toolchains/arm-$kernel_name-androideabi-4.4.3/prebuilt/$kernel_name-x86 fi if test -d "$android_toolchain" ; then AC_MSG_RESULT([$android_toolchain]) else AC_MSG_ERROR([not found. You have to specify --with-android-toolchain=/path/to/ndk/toolchain.]) fi fi if test -z "$android_platform" ; then AC_MSG_CHECKING([for android platform directory]) android_platform="$android_ndk"/build/platforms/android-5/arch-arm # With newer NDK, the platform path has changed. if ! test -d "$android_platform" ; then android_platform="$android_ndk"/platforms/android-5/arch-arm fi if test -d "$android_platform" ; then AC_MSG_RESULT([$android_platform]) else AC_MSG_ERROR([not found. You have to specify --with-android-platform=/path/to/ndk/platform.]) fi fi dnl set up compilers AS="$android_toolchain"/bin/"$android_tool_prefix"-as CC="$android_toolchain"/bin/"$android_tool_prefix"-gcc CXX="$android_toolchain"/bin/"$android_tool_prefix"-g++ CPP="$android_toolchain"/bin/"$android_tool_prefix"-cpp LD="$android_toolchain"/bin/"$android_tool_prefix"-ld AR="$android_toolchain"/bin/"$android_tool_prefix"-ar RANLIB="$android_toolchain"/bin/"$android_tool_prefix"-ranlib STRIP="$android_toolchain"/bin/"$android_tool_prefix"-strip CPPFLAGS="-I$android_platform/usr/include $CPPFLAGS" CFLAGS="-mandroid -I$android_platform/usr/include -msoft-float -fno-short-enums -fno-exceptions $CFLAGS" CXXFLAGS="-mandroid -I$android_platform/usr/include -msoft-float -fpic -fno-short-enums -fno-exceptions $CXXFLAGS" LDFLAGS="-mandroid -L$android_platform/usr/lib -Wl,-rpath-link=$android_platform/usr/lib --sysroot=$android_platform $LDFLAGS" dnl prevent cross compile section from using these flags as host flags if test -z "$HOST_CPPFLAGS" ; then HOST_CPPFLAGS=" " fi if test -z "$HOST_CFLAGS" ; then HOST_CFLAGS=" " fi if test -z "$HOST_CXXFLAGS" ; then HOST_CXXFLAGS=" " fi if test -z "$HOST_LDFLAGS" ; then HOST_LDFLAGS=" " fi AC_DEFINE(ANDROID) ;; esac fi dnl ======================================================== dnl = dnl = Check options that may affect the compiler dnl = dnl ======================================================== dist_prefix='${MOD_DEPTH}/dist' dist_bindir='${dist_prefix}/bin' dist_includedir='${dist_prefix}/include/nspr' dist_libdir='${dist_prefix}/lib' dnl If the --includedir option was not specified, add '/nspr' to autoconf's dnl default value of includedir. if test "${includedir}" = '${prefix}/include'; then includedir='${prefix}/include/nspr' fi AC_ARG_WITH(dist-prefix, [ --with-dist-prefix=DIST_PREFIX place build files in DIST_PREFIX [dist]], dist_prefix=$withval) AC_ARG_WITH(dist-bindir, [ --with-dist-bindir=DIR build execuatables in DIR [DIST_PREFIX/bin]], dist_bindir=$withval) AC_ARG_WITH(dist-includedir, [ --with-dist-includedir=DIR build include files in DIR [DIST_PREFIX/include/nspr]], dist_includedir=$withval) AC_ARG_WITH(dist-libdir, [ --with-dist-libdir=DIR build library files in DIR [DIST_PREFIX/lib]], dist_libdir=$withval) AC_SUBST(dist_prefix) AC_SUBST(dist_bindir) AC_SUBST(dist_includedir) AC_SUBST(dist_libdir) dnl Check if NSPR is being compiled for Mozilla dnl Let --with-arg override environment setting dnl AC_ARG_WITH(mozilla, [ --with-mozilla Compile NSPR with Mozilla support], [ if test "$withval" = "yes"; then AC_DEFINE(MOZILLA_CLIENT) MOZILLA_CLIENT=1 else MOZILLA_CLIENT= fi], [ if test -n "$MOZILLA_CLIENT"; then AC_DEFINE(MOZILLA_CLIENT) fi]) AC_ARG_ENABLE(optimize, [ --enable-optimize[=OPT] Enable code optimizations (ie. -O2) ], [ if test "$enableval" != "no"; then MOZ_OPTIMIZE=1 if test -n "$enableval" -a "$enableval" != "yes"; then _OPTIMIZE_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'` _SAVE_OPTIMIZE_FLAGS=$_OPTIMIZE_FLAGS fi else MOZ_OPTIMIZE= fi ]) AC_ARG_ENABLE(debug, [ --enable-debug[=DBG] Enable debugging (using compiler flags DBG)], [ if test "$enableval" != "no"; then MOZ_DEBUG=1 MOZ_DEBUG_SYMBOLS=1 if test -n "$enableval" -a "$enableval" != "yes"; then _DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'` _SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS fi else MOZ_DEBUG= fi ], MOZ_DEBUG_SYMBOLS=1) AC_ARG_ENABLE(debug-symbols, [ --enable-debug-symbols[=DBG] Enable debugging symbols (using compiler flags DBG)], [ if test "$enableval" != "no"; then MOZ_DEBUG_SYMBOLS=1 if test -n "$enableval" -a "$enableval" != "yes"; then if test -z "$_SAVE_DEBUG_FLAGS"; then _DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'` _SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS else AC_MSG_ERROR([--enable-debug-symbols flags cannot be used with --enable-debug flags]) fi fi else MOZ_DEBUG_SYMBOLS= fi ]) AC_ARG_ENABLE(win32-target, [ --enable-win32-target=\$t Specify win32 flavor. (WIN95 or WINNT)], OS_TARGET=`echo $enableval | tr a-z A-Z`) AC_ARG_ENABLE(symbian-target, [ --enable-symbian-target=\$t Specify symbian flavor. (WINSCW or GCCE)], OS_TARGET=`echo $enableval | tr a-z A-Z`) AC_ARG_ENABLE(debug-rtl, [ --enable-debug-rtl Use the MSVC debug runtime library], [ if test "$enableval" = "yes"; then USE_DEBUG_RTL=1 fi ]) AC_ARG_ENABLE(n32, [ --enable-n32 Enable n32 ABI support (IRIX only)], [ if test "$enableval" = "yes"; then USE_N32=1 else if test "$enableval" = "no"; then USE_N32= fi fi ]) AC_ARG_ENABLE(64bit, [ --enable-64bit Enable 64-bit support (on certain platforms)], [ if test "$enableval" = "yes"; then USE_64=1 fi ]) AC_ARG_ENABLE(mdupdate, [ --enable-mdupdate Enable use of certain compilers' mdupdate feature], [ if test "$enableval" = "yes"; then USE_MDUPDATE=1 fi ]) AC_ARG_ENABLE(cplus, [ --enable-cplus Enable some c++ api routines], [ if test "$enableval" = "yes"; then USE_CPLUS=1 fi]) AC_ARG_WITH(arm-kuser, [ --with-arm-kuser Use kuser helpers (Linux/ARM only) (Requires kernel 2.6.13 or later)], [ if test "$withval" = "yes"; then AC_DEFINE(_PR_ARM_KUSER) fi ]) dnl ======================================================== dnl = Mac OS X SDK support dnl ======================================================== AC_ARG_WITH(macos-sdk, [ --with-macos-sdk=dir Location of platform SDK to use (Mac OS X only)], MACOS_SDK_DIR=$withval) AC_ARG_ENABLE(macos-target, [ --enable-macos-target=VER Set the minimum MacOS version needed at runtime [10.2 for ppc, 10.4 for x86]], [_MACOSX_DEPLOYMENT_TARGET=$enableval]) dnl ======================================================== dnl = dnl = Set the threading model dnl = dnl ======================================================== case "$target" in *-aix*) case "${target_os}" in aix3.2*) USE_NSPR_THREADS=1 ;; *) USE_PTHREADS=1 ;; esac ;; esac dnl ======================================================== dnl = dnl = Set the default C compiler dnl = dnl ======================================================== if test -z "$CC"; then case "$target" in *-aix*) if test -z "$USE_NSPR_THREADS"; then CC=xlc_r else CC=xlc fi ;; *-hpux*) CC=cc ;; *-irix*) CC=cc ;; *-osf*) CC=cc ;; *-solaris*) CC=cc ;; esac fi dnl ======================================================== dnl = dnl = Set the default C++ compiler dnl = dnl ======================================================== if test -z "$CXX"; then case "$target" in *-aix*) if test -z "$USE_NSPR_THREADS"; then CXX=xlC_r else CXX=xlC fi ;; *-hpux*) case "${target_os}" in hpux10.30) CXX=aCC ;; hpux11.*) CXX=aCC ;; *) CXX=CC ;; esac ;; *-irix*) CXX=CC ;; *-osf*) CXX=cxx ;; *-solaris*) CXX=CC ;; esac fi if test -z "$SKIP_PATH_CHECKS"; then AC_PATH_PROG(WHOAMI, $WHOAMI whoami, echo not_whoami) fi if test -n "$MOZ_DEBUG"; then AC_DEFINE(DEBUG) DEFINES="$DEFINES -UNDEBUG" case "${target_os}" in beos*) DEFINES="$DEFINES -DDEBUG_${USER}" ;; msvc*|mks*|cygwin*|mingw*|wince*|winmo*|os2*) DEFINES="$DEFINES -DDEBUG_`echo ${USERNAME} | sed -e 's| |_|g'`" ;; *) DEFINES="$DEFINES -DDEBUG_`$WHOAMI`" ;; esac else AC_DEFINE(NDEBUG) DEFINES="$DEFINES -UDEBUG" fi if test -z "$SKIP_COMPILER_CHECKS"; then dnl ======================================================== dnl Checks for compilers. dnl ======================================================== dnl Explicitly honor $CROSS_COMPILE to allow cross-compiling dnl between toolkits on the same architecture, as when dnl targeting the iOS Simulator from OS X. if test "$target" != "$host" -o -n "$CROSS_COMPILE"; then echo "cross compiling from $host to $target" cross_compiling=yes _SAVE_CC="$CC" _SAVE_CFLAGS="$CFLAGS" _SAVE_LDFLAGS="$LDFLAGS" AC_MSG_CHECKING([for $host compiler]) AC_CHECK_PROGS(HOST_CC, $HOST_CC gcc cc /usr/ucb/cc, "") if test -z "$HOST_CC"; then AC_MSG_ERROR([no acceptable cc found in \$PATH]) fi AC_MSG_RESULT([$HOST_CC]) if test -z "$HOST_CFLAGS"; then HOST_CFLAGS="$CFLAGS" fi if test -z "$HOST_LDFLAGS"; then HOST_LDFLAGS="$LDFLAGS" fi CC="$HOST_CC" CFLAGS="$HOST_CFLAGS" LDFLAGS="$HOST_LDFLAGS" AC_MSG_CHECKING([whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works]) AC_TRY_COMPILE([], [return(0);], [ac_cv_prog_host_cc_works=1 AC_MSG_RESULT([yes])], AC_MSG_ERROR([installation or configuration problem: $host compiler $HOST_CC cannot create executables.]) ) CC=$_SAVE_CC CFLAGS=$_SAVE_CFLAGS LDFLAGS=$_SAVE_LDFLAGS case "$build:$target" in powerpc-apple-darwin8*:i?86-apple-darwin*) dnl The Darwin cross compiler doesn't necessarily point itself at a dnl root that has libraries for the proper architecture, it defaults dnl to the system root. The libraries in the system root on current dnl versions of PPC OS X 10.4 aren't fat, so these target compiler dnl checks will fail. Fake a working SDK in that case. _SAVE_CFLAGS=$CFLAGS _SAVE_CXXFLAGS=$CXXFLAGS CFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk $CFLAGS" CXXFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk $CXXFLAGS" ;; *:arm*-apple-darwin*) dnl The arm compiler doesn't appear to know about its root by default, dnl so explicitly pass it one here. Later on we'll put this in CFLAGS dnl anyway. _SAVE_CFLAGS=$CFLAGS _SAVE_CXXFLAGS=$CXXFLAGS CFLAGS="-isysroot $MACOS_SDK_DIR $CFLAGS" CXXFLAGS="-isysroot $MACOS_SDK_DIR $CXXFLAGS" ;; esac AC_CHECK_PROGS(CC, $CC "${target_alias}-gcc" "${target}-gcc", echo) unset ac_cv_prog_CC AC_PROG_CC if test -n "$USE_CPLUS"; then AC_CHECK_PROGS(CXX, $CXX "${target_alias}-g++" "${target}-g++", echo) unset ac_cv_prog_CXX AC_PROG_CXX fi case "$build:$target" in powerpc-apple-darwin8*:i?86-apple-darwin*|*:arm*-apple-darwin*) dnl Revert the changes made above. From this point on, the target dnl compiler will never be used without applying the SDK to CFLAGS dnl (see --with-macos-sdk below). CFLAGS=$_SAVE_CFLAGS CXXFLAGS=$_SAVE_CXXFLAGS ;; esac AC_CHECK_PROGS(RANLIB, $RANLIB "${target_alias}-ranlib" "${target}-ranlib", echo) AC_CHECK_PROGS(AR, $AR "${target_alias}-ar" "${target}-ar", echo) AC_CHECK_PROGS(AS, $AS "${target_alias}-as" "${target}-as", echo) AC_CHECK_PROGS(LD, $LD "${target_alias}-ld" "${target}-ld", echo) AC_CHECK_PROGS(STRIP, $STRIP "${target_alias}-strip" "${target}-strip", echo) AC_CHECK_PROGS(WINDRES, $WINDRES "${target_alias}-windres" "${target}-windres", echo) else AC_PROG_CC if test -n "$USE_CPLUS"; then if test "$CC" = "cl" -a -z "$CXX"; then CXX=$CC else AC_PROG_CXX fi fi AC_PROG_CPP AC_PROG_RANLIB AC_PATH_PROGS(AS, as, $CC) AC_PATH_PROGS(AR, ar, echo not_ar) AC_PATH_PROGS(LD, ld link, echo not_ld) AC_PATH_PROGS(STRIP, strip, echo not_strip) AC_PATH_PROGS(WINDRES, windres, echo not_windres) if test -z "$HOST_CC"; then HOST_CC="$CC" fi if test -z "$HOST_CFLAGS"; then HOST_CFLAGS="$CFLAGS" fi fi if test "$GCC" = "yes"; then GNU_CC=1 fi if test "$GXX" = "yes"; then GNU_CXX=1 fi if test "`echo | $AS -v 2>&1 | grep -c GNU`" != "0"; then GNU_AS=1 fi rm -f a.out case "$build:$target" in i?86-apple-darwin*:powerpc-apple-darwin*) dnl cross_compiling will have erroneously been set to "no" in this dnl case, because the x86 build host is able to run ppc code in a dnl translated environment, making a cross compiler appear native. cross_compiling=yes ;; esac if test "$cross_compiling" = "yes"; then CROSS_COMPILE=1 else CROSS_COMPILE= fi dnl ======================================================== dnl Check for gcc -pipe support dnl ======================================================== AC_MSG_CHECKING([for gcc -pipe support]) if test -n "$GNU_CC" && test -n "$GNU_CXX" && test -n "$GNU_AS"; then echo '#include <stdio.h>' > dummy-hello.c echo 'int main() { printf("Hello World\n"); return 0; }' >> dummy-hello.c ${CC} -S dummy-hello.c -o dummy-hello.s 2>&5 cat dummy-hello.s | ${AS} -o dummy-hello.S - 2>&5 if test $? = 0; then _res_as_stdin="yes" else _res_as_stdin="no" fi if test "$_res_as_stdin" = "yes"; then _SAVE_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -pipe" AC_TRY_COMPILE( [ #include <stdio.h> ], [printf("Hello World\n");], [_res_gcc_pipe="yes"], [_res_gcc_pipe="no"] ) CFLAGS=$_SAVE_CFLAGS fi if test "$_res_as_stdin" = "yes" && test "$_res_gcc_pipe" = "yes"; then _res="yes"; CFLAGS="$CFLAGS -pipe" CXXFLAGS="$CXXFLAGS -pipe" else _res="no" fi rm -f dummy-hello.c dummy-hello.s dummy-hello.S dummy-hello a.out AC_MSG_RESULT([$_res]) else AC_MSG_RESULT([no]) fi dnl ======================================================== dnl Profile guided optimization dnl ======================================================== dnl Test for profiling options dnl Under gcc 3.4+, use -fprofile-generate/-fprofile-use _SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fprofile-generate -fprofile-correction" AC_MSG_CHECKING([whether C compiler supports -fprofile-generate]) AC_TRY_COMPILE([], [return 0;], [ PROFILE_GEN_CFLAGS="-fprofile-generate" result="yes" ], result="no") AC_MSG_RESULT([$result]) if test $result = "yes"; then PROFILE_GEN_LDFLAGS="-fprofile-generate" PROFILE_USE_CFLAGS="-fprofile-use -fprofile-correction -Wcoverage-mismatch" PROFILE_USE_LDFLAGS="-fprofile-use" fi CFLAGS="$_SAVE_CFLAGS" dnl =============================================================== dnl Check for .hidden assembler directive and visibility attribute. dnl Borrowed from glibc configure.in dnl =============================================================== if test "$GNU_CC"; then AC_CACHE_CHECK(for visibility(hidden) attribute, ac_cv_visibility_hidden, [cat > conftest.c <<EOF int foo __attribute__ ((visibility ("hidden"))) = 1; EOF ac_cv_visibility_hidden=no if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then if grep '\.hidden.*foo' conftest.s >/dev/null; then ac_cv_visibility_hidden=yes fi fi rm -f conftest.[cs] ]) if test "$ac_cv_visibility_hidden" = "yes"; then AC_DEFINE(HAVE_VISIBILITY_HIDDEN_ATTRIBUTE) AC_CACHE_CHECK(for visibility pragma support, ac_cv_visibility_pragma, [cat > conftest.c <<EOF #pragma GCC visibility push(hidden) int foo_hidden = 1; #pragma GCC visibility push(default) int foo_default = 1; EOF ac_cv_visibility_pragma=no if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then if grep '\.hidden.*foo_hidden' conftest.s >/dev/null; then if ! grep '\.hidden.*foo_default' conftest.s > /dev/null; then ac_cv_visibility_pragma=yes fi fi fi rm -f conftest.[cs] ]) if test "$ac_cv_visibility_pragma" = "yes"; then AC_DEFINE(HAVE_VISIBILITY_PRAGMA) # To work around a build problem on Linux x86-64 (Bugzilla bug # 293438), we use the -fvisibility=hidden flag. This flag is less # optimal than #pragma GCC visibility push(hidden) because the flag # assumes that symbols defined outside the current source file have # the default visibility. This has the advantage that we don't need # to wrap system header files, but has the disadvantage that calls # to hidden symbols defined in other source files cannot be # optimized by the compiler. The -fvisibility=hidden flag does # hide and export symbols correctly. #VISIBILITY_FLAGS='-I$(dist_includedir)/system_wrappers -include $(topsrcdir)/config/gcc_hidden.h' #WRAP_SYSTEM_INCLUDES=1 VISIBILITY_FLAGS="-fvisibility=hidden" WRAP_SYSTEM_INCLUDES= fi fi fi # GNU_CC fi # SKIP_COMPILER_CHECKS dnl ======================================================== dnl Checks for programs. dnl ======================================================== if test -z "$SKIP_PATH_CHECKS"; then AC_PATH_PROGS(PERL, perl5 perl, echo not_perl) elif test -z "$PERL"; then PERL=perl fi dnl ======================================================== dnl Default platform specific options dnl ======================================================== OBJ_SUFFIX=o LIB_SUFFIX=a DLL_SUFFIX=so ASM_SUFFIX=s MKSHLIB='$(LD) $(DSO_LDOPTS) -o $@' PR_MD_ASFILES= PR_MD_CSRCS= PR_MD_ARCH_DIR=unix AR_FLAGS='cr $@' AS='$(CC)' ASFLAGS='$(CFLAGS)' if test -n "$CROSS_COMPILE"; then OS_ARCH=`echo $target_os | sed -e 's|/|_|g'` OS_RELEASE= OS_TEST="${target_cpu}" case "${target_os}" in linux*) OS_ARCH=Linux ;; solaris*) OS_ARCH=SunOS OS_RELEASE=5 ;; mingw*) OS_ARCH=WINNT ;; wince*) OS_ARCH=WINCE ;; winmo*) OS_ARCH=WINCE ;; darwin*) OS_ARCH=Darwin ;; riscos*) OS_ARCH=RISCOS ;; esac else OS_ARCH=`uname -s | sed -e 's|/|_|g'` OS_RELEASE=`uname -r` OS_TEST=`uname -m` fi if test "$OS_ARCH" = "IRIX64"; then OS_ARCH=IRIX fi if test "$OS_ARCH" = "AIX"; then OS_RELEASE=`uname -v`.`uname -r` fi if test "$OS_ARCH" = "FreeBSD"; then OS_RELEASE=`echo $OS_RELEASE | sed 's/-.*//'` fi if test "$OS_ARCH" = "Linux"; then OS_RELEASE=`echo $OS_RELEASE | sed 's/-.*//'` OS_RELEASE=`echo $OS_RELEASE | awk -F\. '{ print $1 "." $2 }'` fi ####################################################################### # Master "Core Components" macros for getting the OS target # ####################################################################### # # Note: OS_TARGET should be specified on the command line for gmake. # When OS_TARGET=WIN95 is specified, then a Windows 95 target is built. # The difference between the Win95 target and the WinNT target is that # the WinNT target uses Windows NT specific features not available # in Windows 95. The Win95 target will run on Windows NT, but (supposedly) # at lesser performance (the Win95 target uses threads; the WinNT target # uses fibers). # # If OS_TARGET is not specified, it defaults to $(OS_ARCH), i.e., no # cross-compilation. # # # The following hack allows one to build on a WIN95 machine (as if # s/he were cross-compiling on a WINNT host for a WIN95 target). # It also accomodates for MKS's uname.exe. If you never intend # to do development on a WIN95 machine, you don't need this hack. # case "$OS_ARCH" in WIN95) OS_ARCH=WINNT OS_TARGET=WIN95 ;; Windows_95) OS_ARCH=Windows_NT OS_TARGET=WIN95 ;; Windows_98) OS_ARCH=Windows_NT OS_TARGET=WIN95 ;; CYGWIN_9*|CYGWIN_ME*) OS_ARCH='CYGWIN_NT-4.0' OS_TARGET=WIN95 ;; OS_2) OS_ARCH=OS2 OS_TARGET=OS2 ;; esac # # On WIN32, we also define the variable CPU_ARCH. # case "$OS_ARCH" in WINNT) CPU_ARCH=`uname -p` if test "$CPU_ARCH" = "I386"; then CPU_ARCH=x86 fi ;; Windows_NT) # # If uname -s returns "Windows_NT", we assume that we are using # the uname.exe in MKS toolkit. # # The -r option of MKS uname only returns the major version number. # So we need to use its -v option to get the minor version number. # Moreover, it doesn't have the -p option, so we need to use uname -m. # OS_ARCH=WINNT OS_MINOR_RELEASE=`uname -v` if test "$OS_MINOR_RELEASE" = "00"; then OS_MINOR_RELEASE=0 fi OS_RELEASE="${OS_RELEASE}.${OS_MINOR_RELEASE}" CPU_ARCH=`uname -m` # # MKS's uname -m returns "586" on a Pentium machine. # if echo "$CPU_ARCH" | grep -c 86 >/dev/null; then CPU_ARCH=x86 fi ;; CYGWIN_NT*|MINGW*_NT*) # # If uname -s returns "CYGWIN_NT-4.0", we assume that we are using # the uname.exe in the Cygwin tools. # If uname -s returns MINGW32_NT-5.1, we assume that we are using # the uname.exe in the MSYS tools. # OS_RELEASE=`expr $OS_ARCH : '.*NT-\(.*\)'` OS_ARCH=WINNT CPU_ARCH=`uname -m` # # Cygwin's uname -m returns "i686" on a Pentium Pro machine. # if echo "$CPU_ARCH" | grep -c 86 >/dev/null; then CPU_ARCH=x86 fi ;; esac if test -n "$MOZILLA_CLIENT" && test "$OS_ARCH" = "WINNT"; then OS_TARGET=WIN95 if test -n "$MOZ_DEBUG"; then USE_DEBUG_RTL=1 fi fi if test -z "$OS_TARGET"; then OS_TARGET=$OS_ARCH fi if test "$OS_TARGET" = "WIN95"; then OS_RELEASE="4.0" fi OS_CONFIG="${OS_TARGET}${OS_RELEASE}" dnl ======================================================== dnl Enable high-memory support on OS/2 by default. dnl ======================================================== AC_ARG_ENABLE(os2-high-mem, [ --disable-os2-high-mem Disable high-memory support on OS/2], [ if test "$enableval" = "no"; then MOZ_OS2_HIGH_MEMORY= else MOZ_OS2_HIGH_MEMORY=1 fi ]) dnl ======================================================== dnl = ARM toolchain tweaks dnl ======================================================== dnl Defaults case "${CPU_ARCH}-${OS_TARGET}" in arm-Android) MOZ_THUMB=yes MOZ_ARCH=armv7-a MOZ_FPU=vfp MOZ_FLOAT_ABI=softfp ;; arm-*) if test -n "$MOZ_PLATFORM_MAEMO"; then MOZ_THUMB=no MOZ_ARCH=armv7-a MOZ_FLOAT_ABI=softfp fi if test "$MOZ_PLATFORM_MAEMO" = 6; then MOZ_THUMB=yes fi ;; esac dnl Kept for compatibility with some buildbot mozconfig AC_ARG_ENABLE(thumb2, [], MOZ_THUMB=$enableval) AC_ARG_WITH(thumb, [ --with-thumb[[=yes|no|toolchain-default]]] [ Use Thumb instruction set (-mthumb)], if test -z "$GNU_CC"; then AC_MSG_ERROR([--with-thumb is not supported on non-GNU toolchain-defaults]) fi MOZ_THUMB=$withval) AC_ARG_WITH(thumb-interwork, [ --with-thumb-interwork[[=yes|no|toolchain-default]] Use Thumb/ARM instuctions interwork (-mthumb-interwork)], if test -z "$GNU_CC"; then AC_MSG_ERROR([--with-thumb-interwork is not supported on non-GNU toolchain-defaults]) fi MOZ_THUMB_INTERWORK=$withval) AC_ARG_WITH(arch, [ --with-arch=[[type|toolchain-default]] Use specific CPU features (-march=type)], if test -z "$GNU_CC"; then AC_MSG_ERROR([--with-arch is not supported on non-GNU toolchain-defaults]) fi MOZ_ARCH=$withval) AC_ARG_WITH(fpu, [ --with-fpu=[[type|toolchain-default]] Use specific FPU type (-mfpu=type)], if test -z "$GNU_CC"; then AC_MSG_ERROR([--with-fpu is not supported on non-GNU toolchain-defaults]) fi MOZ_FPU=$withval) AC_ARG_WITH(float-abi, [ --with-float-abi=[[type|toolchain-default]] Use specific arm float ABI (-mfloat-abi=type)], if test -z "$GNU_CC"; then AC_MSG_ERROR([--with-float-abi is not supported on non-GNU toolchain-defaults]) fi MOZ_FLOAT_ABI=$withval) AC_ARG_WITH(soft-float, [ --with-soft-float[[=yes|no|toolchain-default]] Use soft float library (-msoft-float)], if test -z "$GNU_CC"; then AC_MSG_ERROR([--with-soft-float is not supported on non-GNU toolchain-defaults]) fi MOZ_SOFT_FLOAT=$withval) case "$MOZ_ARCH" in toolchain-default|"") arch_flag="" ;; *) arch_flag="-march=$MOZ_ARCH" ;; esac case "$MOZ_THUMB" in yes) MOZ_THUMB2=1 thumb_flag="-mthumb" ;; no) MOZ_THUMB2= thumb_flag="-marm" ;; *) _SAVE_CFLAGS="$CFLAGS" CFLAGS="$arch_flag" AC_TRY_COMPILE([],[return sizeof(__thumb2__);], MOZ_THUMB2=1, MOZ_THUMB2=) CFLAGS="$_SAVE_CFLAGS" thumb_flag="" ;; esac case "$MOZ_THUMB_INTERWORK" in yes) thumb_interwork_flag="-mthumb-interwork" ;; no) thumb_interwork_flag="-mno-thumb-interwork" ;; *) # toolchain-default thumb_interwork_flag="" ;; esac case "$MOZ_FPU" in toolchain-default|"") fpu_flag="" ;; *) fpu_flag="-mfpu=$MOZ_FPU" ;; esac case "$MOZ_FLOAT_ABI" in toolchain-default|"") float_abi_flag="" ;; *) float_abi_flag="-mfloat-abi=$MOZ_FLOAT_ABI" ;; esac case "$MOZ_SOFT_FLOAT" in yes) soft_float_flag="-msoft-float" ;; no) soft_float_flag="-mno-soft-float" ;; *) # toolchain-default soft_float_flag="" ;; esac dnl Use echo to avoid accumulating space characters all_flags=`echo $arch_flag $thumb_flag $thumb_interwork_flag $fpu_flag $float_abi_flag $soft_float_flag` if test -n "$all_flags"; then _SAVE_CFLAGS="$CFLAGS" CFLAGS="$all_flags" AC_MSG_CHECKING(whether the chosen combination of compiler flags ($all_flags) works) AC_TRY_COMPILE([],[return 0;], AC_MSG_RESULT([yes]), AC_MSG_ERROR([no])) CFLAGS="$_SAVE_CFLAGS $all_flags" CXXFLAGS="$CXXFLAGS $all_flags" ASFLAGS="$ASFLAGS $all_flags" if test -n "$thumb_flag"; then LDFLAGS="$LDFLAGS $thumb_flag" fi fi dnl ======================================================== dnl Override of system specific host options dnl ======================================================== case "$host" in *-mingw*) NSINSTALL=nsinstall ;; *-cygwin*|*-msvc*|*-mks*|*-wince*|*-winmo*) NSINSTALL='$(CYGWIN_WRAPPER) nsinstall' if test `echo "${PATH}" | grep -c \;` = 0; then CYGWIN_WRAPPER='sh $(topsrcdir)/build/cygwin-wrapper' fi ;; *-beos*) HOST_CFLAGS="$HOST_CFLAGS -DXP_BEOS -DBeOS -DBEOS -D_POSIX_SOURCE" ;; *os2*) ;; *) HOST_CFLAGS="$HOST_CFLAGS -DXP_UNIX" ;; esac dnl ======================================================== dnl Override of system specific target options dnl ======================================================== case "$target" in *-aix*) AC_DEFINE(XP_UNIX) AC_DEFINE(AIX) AC_DEFINE(SYSV) DSO_LDOPTS='-brtl -bnortllib -bM:SRE -bnoentry -bexpall -blibpath:/usr/lib:/lib' AC_CHECK_HEADER(sys/atomic_op.h, AC_DEFINE(AIX_HAVE_ATOMIC_OP_H)) case "${target_os}" in aix3.2*) AC_DEFINE(AIX_RENAME_SELECT) AC_DEFINE(_PR_NO_LARGE_FILES) AIX_LINK_OPTS='-bnso -berok' PR_MD_ASFILES=os_AIX.s ;; aix4.1*) AC_DEFINE(AIX_TIMERS) AC_DEFINE(_PR_NO_LARGE_FILES) AC_DEFINE(AIX4_1) MKSHLIB= DSO_LDOPTS= AIX_LINK_OPTS='-bnso -berok' LIBNSPR='-L$(dist_libdir) -lnspr$(MOD_MAJOR_VERSION)_shr' LIBPLC='-L$(dist_libdir) -lplc$(MOD_MAJOR_VERSION)_shr' ;; aix4.2*) AC_DEFINE(AIX_TIMERS) AC_DEFINE(_PR_HAVE_OFF64_T) AIX_LINK_OPTS='-brtl -bnso -berok' ;; aix4.3*) AC_DEFINE(AIX_TIMERS) AC_DEFINE(_PR_HAVE_OFF64_T) AC_DEFINE(AIX4_3_PLUS) AC_DEFINE(HAVE_SOCKLEN_T) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) USE_IPV6=1 AIX_LINK_OPTS='-brtl -bnso -berok' ;; *) AC_DEFINE(AIX_TIMERS) AC_DEFINE(_PR_HAVE_OFF64_T) AC_DEFINE(AIX4_3_PLUS) AC_DEFINE(HAVE_SOCKLEN_T) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) USE_IPV6=1 AIX_LINK_OPTS='-brtl -bnso -berok' ;; esac CFLAGS="$CFLAGS -qro -qroconst" AIX_WRAP='$(DIST)/lib/aixwrap.o' AIX_TMP='./_aix_tmp.o' if test -n "$USE_64"; then MDCPUCFG_H=_aix64.cfg OBJECT_MODE=64 else MDCPUCFG_H=_aix32.cfg fi PR_MD_CSRCS=aix.c RESOLVE_LINK_SYMBOLS=1 ;; *-android*|*-linuxandroid*) if test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 IMPL_STRATEGY=_PTH fi AC_DEFINE(XP_UNIX) AC_DEFINE(_GNU_SOURCE) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) AC_DEFINE(LINUX) CFLAGS="$CFLAGS -Wall" CXXFLAGS="$CXXFLAGS -Wall" MDCPUCFG_H=_linux.cfg PR_MD_CSRCS=linux.c MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' DSO_CFLAGS=-fPIC DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)' _OPTIMIZE_FLAGS=-O2 _DEBUG_FLAGS="-g -fno-inline" # most people on linux use gcc/gdb, and that # combo is not yet good at debugging inlined # functions (even when using DWARF2 as the # debugging format) COMPILER_TAG=_glibc CPU_ARCH=arm CPU_ARCH_TAG=_arm OS_TARGET=Android ;; *-beos*) AC_DEFINE(XP_BEOS) AC_DEFINE(BeOS) AC_DEFINE(BEOS) AC_DEFINE(_POSIX_SOURCE) DSO_LDOPTS=-nostart MDCPUCFG_H=_beos.cfg USE_BTHREADS=1 PR_MD_ARCH_DIR=beos RESOLVE_LINK_SYMBOLS=1 case "${target_cpu}" in i*86) _OPTIMIZE_FLAGS=-O2 _DEBUG_FLAGS='-gdwarf-2 -O0' MKSHLIB='$(CCC) $(DSO_LDOPTS) -o $@' AC_CHECK_LIB(bind, gethostbyaddr, [OS_LIBS="$OS_LIBS -lbind -lsocket"]) ;; powerpc) CC=mwcc CCC=mwcc LD=mwld DSO_LDOPTS='-xms -export pragma -init _init_routine_ -term _term_routine_ -lroot -lnet /boot/develop/lib/ppc/glue-noinit.a /boot/develop/lib/ppc/init_term_dyn.o /boot/develop/lib/ppc/start_dyn.o' _OPTIMIZE_FLAGS=-O2 _DEBUG_FLAGS='-g -O0' ;; esac ;; *-bsdi*) AC_DEFINE(XP_UNIX) AC_DEFINE(BSDI) AC_DEFINE(NEED_BSDREGEX) CFLAGS="$CFLAGS -Wall -Wno-format" CXXFLAGS="$CXXFLAGS -Wall -Wno-format" if echo "$OS_TEST" | grep -c 86 >/dev/null; then CPU_ARCH=x86 elif echo "$OS_TEST" | grep -c sparc >/dev/null; then CPU_ARCH=sparc fi MDCPUCFG_H=_bsdi.cfg PR_MD_CSRCS=bsdi.c DSO_LDOPTS=-r case "$target_os" in bsdi1.1*) AC_DEFINE(_PR_BSDI_JMPBUF_IS_ARRAY) AC_DEFINE(_PR_STAT_HAS_ONLY_ST_ATIME) AC_DEFINE(_PR_NEED_H_ERRNO) MKSHLIB= DSO_CFLAGS= DSO_LDOPTS= ;; bsdi2.1*) AC_DEFINE(_PR_TIMESPEC_HAS_TS_SEC) AC_DEFINE(_PR_BSDI_JMPBUF_IS_ARRAY) AC_DEFINE(HAVE_DLL) AC_DEFINE(USE_DLFCN) AC_DEFINE(_PR_STAT_HAS_ST_ATIMESPEC) PR_MD_ASFILES=os_BSD_OS_386_2.s ;; bsdi4.* | bsdi5.*) AC_DEFINE(_PR_SELECT_CONST_TIMEVAL) AC_DEFINE(_PR_BSDI_JMPBUF_IS_STRUCT) AC_DEFINE(HAVE_DLL) AC_DEFINE(USE_DLFCN) AC_DEFINE(_PR_STAT_HAS_ST_ATIMESPEC) MKSHLIB='$(CC) -o $@ $(DSO_LDOPTS)' DSO_CFLAGS=-fPIC DSO_LDOPTS='-shared -Wl,-soname,$(@:$(OBJDIR)/%.so=%.so)' STRIP="$STRIP -d" case "$target_os" in bsdi4.2* | bsdi4.3* | bsdi5.*) AC_DEFINE(_PR_HAVE_GETPROTO_R) AC_DEFINE(_PR_HAVE_GETPROTO_R_POINTER) ;; esac ;; *) AC_DEFINE(_PR_SELECT_CONST_TIMEVAL) AC_DEFINE(_PR_BSDI_JMPBUF_IS_STRUCT) AC_DEFINE(HAVE_DLL) AC_DEFINE(USE_DLFCN) AC_DEFINE(_PR_STAT_HAS_ST_ATIMESPEC) ;; esac ;; *-darwin*) AC_DEFINE(XP_UNIX) AC_DEFINE(DARWIN) AC_DEFINE(HAVE_BSD_FLOCK) AC_DEFINE(HAVE_SOCKLEN_T) AS='$(CC) -x assembler-with-cpp' CFLAGS="$CFLAGS -Wall -fno-common" case "${target_cpu}" in arm*) CPU_ARCH=arm ;; i*86*) if test -n "$USE_64"; then CPU_ARCH=x86_64 else CPU_ARCH=i386 fi ;; x86_64) CPU_ARCH=x86_64 ;; *) CPU_ARCH=ppc ;; esac if test "`echo $CC | grep -c '\-arch '`" = "0"; then CC="$CC -arch $CPU_ARCH" fi AC_CHECK_HEADER(crt_externs.h) DSO_CFLAGS=-fPIC DSO_LDOPTS='-dynamiclib -compatibility_version 1 -current_version 1 -all_load -install_name @executable_path/$@ -headerpad_max_install_names' _OPTIMIZE_FLAGS=-O2 MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' STRIP="$STRIP -x -S" DLL_SUFFIX=dylib USE_PTHREADS=1 MDCPUCFG_H=_darwin.cfg PR_MD_CSRCS=darwin.c PR_MD_ASFILES=os_Darwin.s # Add Mac OS X support for loading CFM & CFBundle plugins if test -f "${MACOS_SDK_DIR}/System/Library/Frameworks/Carbon.framework/Carbon"; then AC_DEFINE(XP_MACOSX) OS_TARGET=MacOSX if test -n "$_MACOSX_DEPLOYMENT_TARGET" ; then dnl Use the specified value export MACOSX_DEPLOYMENT_TARGET=$_MACOSX_DEPLOYMENT_TARGET elif test -z "$MACOSX_DEPLOYMENT_TARGET" ; then dnl No value specified on the command line or in the environment, dnl use the lesser of the library's minimum or the architecture's dnl minimum. case "${target_cpu}" in powerpc*) dnl Architecture minimum 10.2 export MACOSX_DEPLOYMENT_TARGET=10.2 ;; i*86*) dnl Architecture minimum 10.4 export MACOSX_DEPLOYMENT_TARGET=10.4 ;; esac fi dnl MACOS_SDK_DIR will be set to the SDK location whenever one is dnl in use. NEXT_ROOT will be set and exported if it's needed for dnl ld. if test "$MACOS_SDK_DIR"; then dnl Sync this section with the one in Mozilla's top level. if test ! -d "$MACOS_SDK_DIR"; then AC_MSG_ERROR([SDK not found. When using --with-macos-sdk, you must specify a valid SDK. SDKs are installed when the optional cross-development tools are selected during the Xcode/Developer Tools installation.]) fi changequote(,) CC_VERSION=`$CC -v 2>&1 | grep 'gcc version'` GCC_VERSION_FULL=`echo $CC_VERSION | $PERL -pe 's/^.*gcc version ([^ ]*).*/$1/'` GCC_VERSION=`echo $GCC_VERSION_FULL | $PERL -pe '(split(/\./))[0]>=4&&s/(^\d*\.\d*).*/$1/;'` changequote([,]) GCC_VERSION_MAJOR=`echo $GCC_VERSION_FULL | $PERL -pe 's/(^\d*).*/$1/;'` if test "$GCC_VERSION_MAJOR" -lt "4" ; then SDK_C_FRAMEWORK="-F${MACOS_SDK_DIR}/System/Library/Frameworks" if test -d "${MACOS_SDK_DIR}/Library/Frameworks" ; then SDK_C_FRAMEWORK="$SDK_C_FRAMEWORK -F${MACOS_SDK_DIR}/Library/Frameworks" fi SDK_C_INCLUDE="-isystem ${MACOS_SDK_DIR}/usr/include/gcc/darwin/${GCC_VERSION} -isystem ${MACOS_SDK_DIR}/usr/include ${SDK_C_FRAMEWORK}" CFLAGS="$CFLAGS -nostdinc ${SDK_C_INCLUDE}" dnl CPP needs to be set for AC_CHECK_HEADER. CPP="$CPP -nostdinc ${SDK_C_INCLUDE}" changequote(,) HOST_DARWIN_MAJOR=`echo "$build_os" | sed -E -e 's/^darwin([0-9]+).*$/\1/'` changequote([,]) if test "$HOST_DARWIN_MAJOR" -lt 9 ; then dnl The build host is running Tiger (10.4) or earlier. dnl ld support for -syslibroot is compiler-agnostic, but dnl only available on Tiger and later. On Tiger and dnl earlier build hosts, just rely on NEXT_ROOT, because dnl it's not been shown to cause any problems. MACOS_SDK_LIBS="-L${MACOS_SDK_DIR}/usr/lib/gcc/darwin -L${MACOS_SDK_DIR}/usr/lib/gcc/darwin/${GCC_VERSION_FULL} -L${MACOS_SDK_DIR}/usr/lib ${SDK_C_FRAMEWORK}" else dnl The build host is running Leopard (10.5) or later. dnl With NEXT_ROOT set, the linker will still not apply dnl it when resolving dependencies. This causes problems dnl on Leopard, where an SDK depends on frameworks which dnl were present in earlier OS releases (and the associated dnl SDK) but not in Leopard. -syslibroot does not have dnl this problem, but it results in harmless warnings when dnl NEXT_ROOT is set. NEXT_ROOT needs to remain set even dnl on Leopard because the compiler uses it too. MACOS_SDK_LIBS="-Wl,-syslibroot,${MACOS_SDK_DIR}" fi LDFLAGS="${MACOS_SDK_LIBS} $LDFLAGS" export NEXT_ROOT=$MACOS_SDK_DIR if test -n "$CROSS_COMPILE" ; then dnl NEXT_ROOT will be in the environment, but it dnl shouldn't be set for the build host. HOST_CXX is dnl presently unused. HOST_CC="NEXT_ROOT= $HOST_CC" HOST_CXX="NEXT_ROOT= $HOST_CXX" fi else dnl gcc >= 4.0 uses different paths than above, but knows dnl how to find them itself. CFLAGS="$CFLAGS -isysroot ${MACOS_SDK_DIR}" dnl CPP needs to be set for AC_CHECK_HEADER. CPP="$CPP -isysroot ${MACOS_SDK_DIR}" dnl If gcc >= 4.0.0, we're guaranteed to be on Tiger, which dnl has an ld that supports -syslibroot. Don't set dnl NEXT_ROOT because it will be ignored and cause dnl warnings when -syslibroot is specified. if test "$GCC_VERSION_FULL" != "4.0.0" ; then dnl gcc > 4.0.0 will pass -syslibroot to ld automatically dnl based on the -isysroot it receives. LDFLAGS="$LDFLAGS -isysroot ${MACOS_SDK_DIR}" else dnl gcc 4.0.0 doesn't pass -syslibroot to ld, it needs dnl to be explicit. LDFLAGS="$LDFLAGS -Wl,-syslibroot,${MACOS_SDK_DIR}" fi fi fi fi ;; *-dgux*) AC_DEFINE(XP_UNIX) AC_DEFINE(_PR_LOCAL_THREADS_ONLY) AC_DEFINE(SVR4) AC_DEFINE(SYSV) AC_DEFINE(DGUX) AC_DEFINE(_DGUX_SOURCE) AC_DEFINE(_POSIX4A_DRAFT6_SOURCE) DSO_LDOPTS=-G _OPTIMIZE_FLAGS=-O2 _DEBUG_FLAGS= MDCPUCFG_H=_dgux.cfg PR_MD_CSRCS=dgux.c ;; *-freebsd*) if test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 fi AC_DEFINE(XP_UNIX) AC_DEFINE(FREEBSD) AC_DEFINE(HAVE_BSD_FLOCK) AC_DEFINE(HAVE_SOCKLEN_T) CFLAGS="$CFLAGS $(DSO_CFLAGS) -ansi -Wall" MOZ_OBJFORMAT=`test -x /usr/bin/objformat && /usr/bin/objformat || echo elf` if test "$MOZ_OBJFORMAT" = "elf"; then DLL_SUFFIX=so else DLL_SUFFIX=so.1.0 fi MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' DSO_CFLAGS=-fPIC DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)' MDCPUCFG_H=_freebsd.cfg PR_MD_CSRCS=freebsd.c ;; *-hpux*) AC_DEFINE(XP_UNIX) AC_DEFINE(HPUX) AC_DEFINE(_HPUX_SOURCE) # OSF1 and HPUX report the POLLHUP event for a socket when the # shutdown(SHUT_WR) operation is called for the remote end, even though # the socket is still writeable. Use select(), instead of poll(), to # workaround this problem. AC_DEFINE(_PR_POLL_WITH_SELECT) AC_DEFINE(_USE_BIG_FDS) DSO_LDOPTS='-b +h $(notdir $@)' PR_MD_CSRCS=hpux.c if test "$OS_TEST" = "ia64"; then DLL_SUFFIX=so DSO_LDOPTS="$DSO_LDOPTS +b '\$\$ORIGIN'" CPU_ARCH_TAG=_$OS_TEST if test -z "$USE_64"; then COMPILER_TAG=_32 fi PR_MD_ASFILES=os_HPUX_ia64.s else AC_DEFINE(hppa) DLL_SUFFIX=sl PR_MD_ASFILES=os_HPUX.s fi if test -n "$USE_64"; then MDCPUCFG_H=_hpux64.cfg else MDCPUCFG_H=_hpux32.cfg fi if test -z "$GNU_CC"; then CC="$CC -Ae" CXX="$CXX -ext" DSO_CFLAGS=+Z else DSO_CFLAGS=-fPIC ASFLAGS="$ASFLAGS -x assembler-with-cpp" fi if test -n "$MOZILLA_CLIENT"; then DEFAULT_IMPL_STRATEGY=_EMU fi if echo "$OS_RELEASE" | grep ^A.09 >/dev/null; then AC_DEFINE(_PR_NEED_H_ERRNO) AC_DEFINE(HPUX9) DEFAULT_IMPL_STRATEGY=_EMU USE_NSPR_THREADS=1 fi if echo "$OS_RELEASE" | egrep '^(A.09|B.10)' >/dev/null; then AC_DEFINE(_PR_NO_LARGE_FILES) fi if echo "$OS_RELEASE" | egrep '^(B.10.10|B.10.20)' >/dev/null; then AC_DEFINE(_PR_NEED_H_ERRNO) fi if echo "$OS_RELEASE" | egrep '^(B.10.10|B.10.20)' >/dev/null; then AC_DEFINE(HAVE_INT_LOCALTIME_R) fi if echo "$OS_RELEASE" | egrep '^(B.10.30|B.11)' >/dev/null; then AC_DEFINE(HAVE_POINTER_LOCALTIME_R) fi # HP-UX 11i v2 (B.11.23) or higher changequote(<<,>>) case "$OS_RELEASE" in [C-Z]*|B.[2-9]*|B.1[2-9]*|B.11.[3-9]*|B.11.2[3-9]*) USE_IPV6=1 ;; esac changequote([,]) if test "$OS_RELEASE" = "B.10.01"; then AC_DEFINE(HPUX10) DEFAULT_IMPL_STRATEGY=_EMU fi if test "$OS_RELEASE" = "B.10.10"; then AC_DEFINE(HPUX10) AC_DEFINE(HPUX10_10) DEFAULT_IMPL_STRATEGY=_PTH fi if test "$OS_RELEASE" = "B.10.20"; then AC_DEFINE(HPUX10) AC_DEFINE(HPUX10_20) if test -z "$GNU_CC"; then CFLAGS="$CFLAGS +DAportable +DS1.1" CXXFLAGS="$CXXFLAGS +DAportable +DS1.1" fi DEFAULT_IMPL_STRATEGY=_PTH fi if test "$OS_RELEASE" = "B.10.30"; then AC_DEFINE(HPUX10) AC_DEFINE(HPUX10_30) if test -z "$GNU_CC"; then CFLAGS="$CFLAGS +DAportable +DS1.1" CXXFLAGS="$CXXFLAGS +DAportable +DS1.1" fi DEFAULT_IMPL_STRATEGY=_PTH fi if echo "$OS_RELEASE" | grep ^B.11 >/dev/null; then AC_DEFINE(HPUX10) AC_DEFINE(HPUX11) AC_DEFINE(_LARGEFILE64_SOURCE) AC_DEFINE(_PR_HAVE_OFF64_T) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) if test -z "$GNU_CC"; then if test -z "$USE_64"; then if test "$OS_TEST" = "ia64"; then CFLAGS="$CFLAGS +DD32" CXXFLAGS="$CXXFLAGS +DD32" else CFLAGS="$CFLAGS +DAportable +DS2.0" CXXFLAGS="$CXXFLAGS +DAportable +DS2.0" fi else if test "$OS_TEST" = "ia64"; then CFLAGS="$CFLAGS +DD64" CXXFLAGS="$CXXFLAGS +DD64" else CFLAGS="$CFLAGS +DA2.0W +DS2.0" CXXFLAGS="$CXXFLAGS +DA2.0W +DS2.0" fi fi fi DEFAULT_IMPL_STRATEGY=_PTH fi if test "$DEFAULT_IMPL_STRATEGY" = "_EMU"; then USE_NSPR_THREADS=1 USE_PTHREADS= USE_USER_PTHREADS= elif test "$DEFAULT_IMPL_STRATEGY" = "_PTH"; then USE_PTHREADS=1 if test "$USE_NSPR_THREADS"; then USE_PTHREADS= fi if test "$USE_USER_PTHREADS"; then USE_PTHREADS= fi fi ;; *-irix*) AC_DEFINE(XP_UNIX) AC_DEFINE(IRIX) AC_DEFINE(SVR4) AC_DEFINE(_SGI_MP_SOURCE) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) PR_MD_CSRCS=irix.c PR_MD_ASFILES=os_Irix.s MKSHLIB='$(LD) $(DSO_LDOPTS) -rdata_shared -shared -soname $(notdir $@) -o $@' STRIP="$STRIP -f" RESOLVE_LINK_SYMBOLS=1 if test -n "$USE_64"; then MDCPUCFG_H=_irix64.cfg else MDCPUCFG_H=_irix32.cfg fi case "${target_os}" in irix6*) AC_DEFINE(IRIX6) USE_PTHREADS=1 USE_N32=1 COMPILER_TAG=_n32 IMPL_STRATEGY=_PTH ;; irix5*) AC_DEFINE(IRIX5) USE_NSPR_THREADS=1 ;; *) USE_PTHREADS=1 USE_N32=1 ;; esac if test "$GNU_CC"; then dnl dnl If we are using gcc with native binutils, we need to dnl suppress the dnl #lineno "filename" num num dnl lines, which confuse IRIX native as. Add -Wp,-P to the dnl gcc command line, which passes -P to the preprocessor. dnl AS='$(CC) -Wp,-P -x assembler-with-cpp -D_ASM -mips2 $(INCLUDES)' CFLAGS="$CFLAGS -Wall -Wno-format" _OPTIMIZE_FLAGS="-O6" else if test -n "$USE_N32"; then AS='as -D_ASM $(INCLUDES) -n32' else AS='as -D_ASM $(INCLUDES)' fi CFLAGS="$CFLAGS -fullwarn -xansi" if test "$USE_N32"; then _OPTIMIZE_FLAGS="-O -OPT:Olimit=4000" else _OPTIMIZE_FLAGS="-O -Olimit 4000" fi if test "$USE_MDUPDATE"; then CFLAGS="$CFLAGS -MDupdate \$(DEPENDENCIES)" fi case "${target}" in *-irix6.*) CFLAGS="$CFLAGS -multigot" DSO_LDOPTS="-no_unresolved" if test "$USE_N32"; then CFLAGS="$CFLAGS -n32 -woff 1209" DSO_LDOPTS="$DSO_LDOPTS -n32" else if test "$USE_64"; then CFLAGS="$CFLAGS -64" else CFLAGS="$CFLAGS -32" fi fi ;; *) CFLAGS="$CFLAGS -xgot" ;; esac fi if test "${target_os}" = "irix5.3"; then AC_DEFINE(IRIX5_3) fi case "${target_os}" in irix6.5) if test -z "$GNU_CC"; then CFLAGS="$CFLAGS -mips3" fi AC_DEFINE(_PR_HAVE_GETPROTO_R) AC_DEFINE(_PR_HAVE_GETPROTO_R_POINTER) AC_DEFINE(_PR_HAVE_SGI_PRDA_PROCMASK) ;; irix5*) ;; *) AC_DEFINE(_PR_HAVE_SGI_PRDA_PROCMASK) ;; esac ;; *-linux*|*-gnu*|*-k*bsd*-gnu) if test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 IMPL_STRATEGY=_PTH fi AC_DEFINE(XP_UNIX) AC_DEFINE(_GNU_SOURCE) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) case "${target_os}" in linux*) AC_DEFINE(LINUX) ;; esac CFLAGS="$CFLAGS -Wall" CXXFLAGS="$CXXFLAGS -Wall" MDCPUCFG_H=_linux.cfg PR_MD_CSRCS=linux.c MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' DSO_CFLAGS=-fPIC DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)' _OPTIMIZE_FLAGS=-O2 _DEBUG_FLAGS="-g -fno-inline" # most people on linux use gcc/gdb, and that # combo is not yet good at debugging inlined # functions (even when using DWARF2 as the # debugging format) COMPILER_TAG=_glibc if echo "$OS_TEST" | grep -c 86 >/dev/null; then CPU_ARCH=x86 else CPU_ARCH=$OS_TEST fi CPU_ARCH_TAG=_${CPU_ARCH} case "${target_cpu}" in alpha) AC_DEFINE(_ALPHA_) AC_DEFINE(__alpha) CFLAGS="$CFLAGS -mieee" CXXFLAGS="$CXXFLAGS -mieee" ;; i*86) AC_DEFINE(i386) PR_MD_ASFILES=os_Linux_x86.s ;; ia64) PR_MD_ASFILES=os_Linux_ia64.s ;; x86_64) if test -n "$USE_64"; then PR_MD_ASFILES=os_Linux_x86_64.s else AC_DEFINE(i386) PR_MD_ASFILES=os_Linux_x86.s CC="$CC -m32" CXX="$CXX -m32" fi ;; ppc|powerpc) PR_MD_ASFILES=os_Linux_ppc.s ;; powerpc64) if test -n "$USE_64"; then CC="$CC -m64" CXX="$CXX -m64" else PR_MD_ASFILES=os_Linux_ppc.s fi ;; m68k) CFLAGS="$CFLAGS -m68020-60" CXXFLAGS="$CXXFLAGS -m68020-60" ;; esac ;; *-mingw*|*-cygwin*|*-msvc*|*-mks*) AC_DEFINE(XP_PC) AC_DEFINE(WIN32) PR_MD_ARCH_DIR=windows RESOLVE_LINK_SYMBOLS=1 if test -n "$GNU_CC"; then CC="$CC -mwindows" CXX="$CXX -mwindows" DLL_SUFFIX=dll MKSHLIB='$(CC) -shared -Wl,--export-all-symbols -Wl,--out-implib -Wl,$(IMPORT_LIBRARY) $(DLLBASE) -o $(subst $(OBJDIR)/,,$(SHARED_LIBRARY))' RC=$WINDRES # Use temp file for windres (bug 213281) RCFLAGS='-O coff --use-temp-file' else CC=cl CXX=cl LD=link AR='lib -NOLOGO -OUT:"$@"' AR_FLAGS= RANLIB='echo not_ranlib' STRIP='echo not_strip' RC=rc.exe GARBAGE='$(OBJDIR)/vc20.pdb $(OBJDIR)/vc40.pdb' OBJ_SUFFIX=obj LIB_SUFFIX=lib DLL_SUFFIX=dll # Determine compiler version changequote(,) _MSVC_VER_FILTER='s|.* \([0-9]\+\.[0-9]\+\.[0-9]\+\(\.[0-9]\+\)\?\).*|\1|p' changequote([,]) CC_VERSION=`"${CC}" -v 2>&1 | sed -ne "$_MSVC_VER_FILTER"` _CC_MAJOR_VERSION=`echo ${CC_VERSION} | awk -F\. '{ print $1 }'` _CC_MINOR_VERSION=`echo ${CC_VERSION} | awk -F\. '{ print $2 }'` _CC_RELEASE=`echo ${CC_VERSION} | awk -F\. '{ print $3 }'` _CC_BUILD=`echo ${CC_VERSION} | awk -F\. '{ print $4 }'` MSC_VER=${_CC_MAJOR_VERSION}${_CC_MINOR_VERSION} if test "$_CC_MAJOR_VERSION" -eq "14"; then dnl -DYNAMICBASE is only supported on VC8SP1 or newer, dnl so be very specific here! dnl VC8 is 14.00.50727.42, VC8SP1 is 14.00.50727.762 if test $_CC_RELEASE -gt 50727; then _USE_DYNAMICBASE=1 elif test $_CC_BUILD -ge 762; then _USE_DYNAMICBASE=1 fi AC_DEFINE(_CRT_SECURE_NO_DEPRECATE) AC_DEFINE(_CRT_NONSTDC_NO_DEPRECATE) elif test $_CC_MAJOR_VERSION -ge 15; then _USE_DYNAMICBASE=1 AC_DEFINE(_CRT_SECURE_NO_WARNINGS) AC_DEFINE(_CRT_NONSTDC_NO_WARNINGS) fi if test -n "$_USE_DYNAMICBASE"; then DLLFLAGS="$DLLFLAGS -DYNAMICBASE" fi # Ensure that mt is Microsoft (R) Manifest Tool and not magnetic # tape manipulation utility (or something else) if test "$MSC_VER" -ge "1400"; then changequote(,) _MSMT_VER_FILTER='s|.* \([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*|\1|p' changequote([,]) MSMT_TOOL=`mt 2>&1|grep 'Microsoft (R) Manifest Tool'` if test -n "$MSMT_TOOL"; then MSMANIFEST_TOOL_VERSION=`echo ${MSMT_TOOL}|sed -ne "$_MSMT_VER_FILTER"` if test -z "$MSMANIFEST_TOOL_VERSION"; then AC_MSG_WARN([Unknown version of the Microsoft (R) Manifest Tool.]) fi MT=mt unset MSMT_TOOL else AC_MSG_ERROR([Microsoft (R) Manifest Tool must be in your \$PATH.]) fi fi CFLAGS="$CFLAGS -W3 -nologo -GF -Gy" DLLFLAGS="$DLLFLAGS -OUT:\"\$@\"" _DEBUG_FLAGS=-Zi _OPTIMIZE_FLAGS=-O2 PROFILE_GEN_CFLAGS="-GL" PROFILE_GEN_LDFLAGS="-LTCG:PGINSTRUMENT" PROFILE_USE_CFLAGS="-GL -wd4624 -wd4952" PROFILE_USE_LDFLAGS="-LTCG:PGUPDATE" if test -z "$MOZ_OPTIMIZE"; then CFLAGS="$CFLAGS -Od" fi if test -n "$USE_DEBUG_RTL"; then CFLAGS="$CFLAGS -MDd" else CFLAGS="$CFLAGS -MD" fi if test -n "$MOZ_DEBUG"; then AC_DEFINE(_DEBUG) else DEFINES="$DEFINES -U_DEBUG" fi if test -n "$MOZ_DEBUG_SYMBOLS"; then if test -n "$MOZ_OPTIMIZE"; then DLLFLAGS="$DLLFLAGS -DEBUG -OPT:REF" LDFLAGS="$LDFLAGS -DEBUG -OPT:REF" else DLLFLAGS="$DLLFLAGS -DEBUG" LDFLAGS="$LDFLAGS -DEBUG" fi fi OS_DLLFLAGS="-nologo -DLL -SUBSYSTEM:WINDOWS" if test "$MSC_VER" -le "1200" -a -z "$MOZ_DEBUG_SYMBOLS"; then OS_DLLFLAGS="$OS_DLLFLAGS -PDB:NONE" fi if test "$OS_TARGET" = "WINNT"; then CFLAGS="$CFLAGS -GT" LIBNSPR='$(dist_libdir)/libnspr$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)' LIBPLC='$(dist_libdir)/libplc$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)' else LIBNSPR='$(dist_libdir)/nspr$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)' LIBPLC='$(dist_libdir)/plc$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)' fi fi # GNU_CC if test -n "$USE_STATIC_TLS"; then AC_DEFINE(_PR_USE_STATIC_TLS) fi if test "$OS_TARGET" = "WINNT"; then AC_DEFINE(WINNT) else AC_DEFINE(WIN95) # undefine WINNT as some versions of mingw gcc define it by default DEFINES="$DEFINES -UWINNT" AC_DEFINE(_PR_GLOBAL_THREADS_ONLY) fi if test "$CPU_ARCH" = "x86"; then CPU_ARCH_TAG= else CPU_ARCH_TAG=$CPU_ARCH fi if test -n "$USE_DEBUG_RTL"; then OBJDIR_SUFFIX=OBJD fi case "$OS_TARGET" in WINNT) MDCPUCFG_H=_winnt.cfg ;; WIN95) MDCPUCFG_H=_win95.cfg ;; *) AC_MSG_ERROR([Missing OS_TARGET for ${target}. Use --enable-win32-target to set.]) ;; esac case "$target_cpu" in i*86) if test -n "$USE_64"; then AC_DEFINE(_AMD64_) else AC_DEFINE(_X86_) fi ;; x86_64) AC_DEFINE(_AMD64_) USE_64=1 ;; ia64) AC_DEFINE(_IA64_) USE_64=1 ;; *) AC_DEFINE(_CPU_ARCH_NOT_DEFINED) ;; esac ;; *-wince*|*-winmo*) AC_DEFINE(XP_PC) AC_DEFINE(WIN32) AC_DEFINE(WINCE) AC_DEFINE(_PR_GLOBAL_THREADS_ONLY) AR_FLAGS='-NOLOGO -OUT:"$@"' OBJ_SUFFIX=obj LIB_SUFFIX=lib DLL_SUFFIX=dll MKSHLIB='$(LD) -DLL $(DSO_LDOPTS) -OUT:$@' PR_MD_ARCH_DIR=windows RESOLVE_LINK_SYMBOLS=1 MDCPUCFG_H=_win95.cfg LIBNSPR='$(dist_libdir)/nspr$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)' LIBPLC='$(dist_libdir)/plc$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)' DLLFLAGS='-OUT:"$@"' if test -n "$MOZ_DEBUG_SYMBOLS"; then OS_LDFLAGS='-DEBUG -DEBUGTYPE:CV' OS_DLLFLAGS='-DEBUG -DEBUGTYPE:CV' DSO_LDOPTS='-DEBUG -DEBUGTYPE:CV' fi _DEBUG_FLAGS=-Zi _OPTIMIZE_FLAGS=-O2 ;; *-ncr-sysv*) AC_DEFINE(XP_UNIX) AC_DEFINE(SVR4) AC_DEFINE(SYSV) AC_DEFINE(NCR) USE_NSPR_THREADS=1 if test "$OS_RELEASE" = "2.03"; then AC_DEFINE(_PR_STAT_HAS_ST_ATIM) else AC_DEFINE(_PR_STAT_HAS_ST_ATIM_UNION) fi if test -z "$GNU_CC"; then CFLAGS="$CFLAGS -Hnocopyr" CXXFLAGS="$CXXFLAGS -Hnocopyr" else CFLAGS="$CFLAGS -fPIC -Wall" CXXFLAGS="$CXXFLAGS -fPIC -Wall" DSO_LDOPTS=-G fi MDCPUCFG_H=_ncr.cfg PR_MD_CSRCS=ncr.c ;; mips-nec-sysv*) AC_DEFINE(XP_UNIX) AC_DEFINE(SVR4) AC_DEFINE(__SVR4) AC_DEFINE(NEC) AC_DEFINE(nec_ews) USE_NSPR_THREADS=1 if test -z "$GNU_CC"; then CC='$(NSDEPTH)/build/hcc cc -Xa -KGnum=0 -KOlimit=4000' CXX=g++ fi OS_LIBS="$OS_LIBS -lsocket -lnsl -ldl" DSO_LDOPTS=-G MDCPUCFG_H=_nec.cfg PR_MD_CSRCS=nec.c ;; *-netbsd*) AC_DEFINE(XP_UNIX) AC_DEFINE(NETBSD) AC_DEFINE(HAVE_BSD_FLOCK) if test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 fi MDCPUCFG_H=_netbsd.cfg PR_MD_CSRCS=netbsd.c DSO_CFLAGS='-fPIC -DPIC' CFLAGS="$CFLAGS -ansi -Wall" CXXFLAGS="$CXXFLAGS -ansi -Wall" MKSHLIB='$(CC) -o $@ $(DSO_LDOPTS)' if test -z "$OBJECT_FMT"; then if echo __ELF__ | ${CC-cc} -E - | grep -q __ELF__ 2>/dev/null; then OBJECT_FMT=a.out DLL_SUFFIX=so.1.0 DSO_LDOPTS='-shared' else OBJECT_FMT=ELF DLL_SUFFIX=so DSO_LDOPTS='-shared -Wl,-soname,$(notdir $@)' fi fi if test "$LIBRUNPATH"; then DSO_LDOPTS="$DSO_LDOPTS -Wl,-R$LIBRUNPATH" fi ;; mips-sony-newsos*) AC_DEFINE(XP_UNIX) AC_DEFINE(SONY) AC_DEFINE(SYSV) AC_DEFINE(SVR4) AC_DEFINE(__svr4) AC_DEFINE(__svr4__) AC_DEFINE(HAVE_SVID_GETTOD) USE_NSPR_THREADS=1 CFLAGS="$CFLAGS -Xa -fullwarn" CXXFLAGS="$CXXFLAGS -Xa -fullwarn" DSO_LDOPTS=-G MDCPUCFG_H=_sony.cfg PR_MD_CSRCS=sony.c ;; *-nextstep*|*-openstep*) AC_DEFINE(XP_UNIX) AC_DEFINE(NEXTSTEP) AC_DEFINE(HAVE_BSD_FLOCK) AC_DEFINE(_POSIX_SOURCE) CFLAGS="$CFLAGS -Wall -fno-common -traditional-cpp -posix" CXXFLAGS="$CXXFLAGS -Wall -fno-common -traditional-cpp -posix" USE_NSPR_THREADS=1 DLL_SUFFIX=dylib MDCPUCFG_H=_nextstep.cfg PR_MD_CSRCS=nextstep.c ;; *-nto*) AC_DEFINE(XP_UNIX) AC_DEFINE(NTO) AC_DEFINE(_QNX_SOURCE) AC_DEFINE(HAVE_POINTER_LOCALTIME_R) MDCPUCFG_H=_nto.cfg PR_MD_CSRCS=nto.c MKSHLIB='$(CC) $(DSO_LDOPTS) -Wl,-soname -Wl,$(notdir $@) -o $@' DSO_CFLAGS=-fPIC DSO_LDOPTS=-shared OS_LIBS="$OS_LIBS -lsocket" _OPTIMIZE_FLAGS="-O1" _DEBUG_FLAGS="-gstabs" ;; *-openbsd*) AC_DEFINE(XP_UNIX) AC_DEFINE(OPENBSD) AC_DEFINE(HAVE_BSD_FLOCK) AC_DEFINE(HAVE_SOCKLEN_T) CFLAGS="$CFLAGS -ansi -Wall" CXXFLAGS="$CXXFLAGS -ansi -Wall" DLL_SUFFIX=so.1.0 DSO_CFLAGS=-fPIC MDCPUCFG_H=_openbsd.cfg PR_MD_CSRCS=openbsd.c OS_LIBS="-lc" if test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 fi DSO_LDOPTS='-shared -fPIC' MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' ;; *-osf*) SHELL_OVERRIDE="SHELL = /usr/bin/ksh" AC_DEFINE(XP_UNIX) AC_DEFINE(OSF1) AC_DEFINE(_REENTRANT) # OSF1 and HPUX report the POLLHUP event for a socket when the # shutdown(SHUT_WR) operation is called for the remote end, even though # the socket is still writeable. Use select(), instead of poll(), to # workaround this problem. AC_DEFINE(_PR_POLL_WITH_SELECT) if echo "$OS_RELEASE" | egrep -c '(V2.0|V3.2)' 2>/dev/null ; then USE_NSPR_THREADS=1 fi if test -z "$GNU_CC"; then CC="$CC -std1 -ieee_with_inexact" if test "$OS_RELEASE" != "V2.0"; then CC="$CC -readonly_strings" fi _OPTIMIZE_FLAGS="$_OPTIMIZE_FLAGS -Olimit 4000" AC_CHECK_HEADER(machine/builtins.h, AC_DEFINE(OSF1_HAVE_MACHINE_BUILTINS_H)) else CFLAGS="$CFLAGS -mieee" CXXFLAGS="$CXXFLAGS -mieee" fi if echo $OS_RELEASE | egrep -c '(V2.0|V3.2)' 2>/dev/null; then AC_DEFINE(HAVE_INT_LOCALTIME_R) else AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) AC_DEFINE(HAVE_POINTER_LOCALTIME_R) fi if echo $OS_RELEASE | grep -c V4.0 >/dev/null; then AC_DEFINE(OSF1V4_MAP_PRIVATE_BUG) fi DSO_LDOPTS='-shared -all -expect_unresolved "*" -soname $(notdir $@)' MDCPUCFG_H=_osf1.cfg PR_MD_CSRCS=osf1.c ;; *-qnx*) AC_DEFINE(XP_UNIX) AC_DEFINE(QNX) AC_DEFINE(_PR_NEED_H_ERRNO) USE_NSPR_THREADS=1 MDCPUCFG_H=_qnx.cfg PR_MD_CSRCS=qnx.c ;; *-riscos*) AC_DEFINE(XP_UNIX) AC_DEFINE(RISCOS) AC_DEFINE(_PR_NEED_H_ERRNO) USE_PTHREADS=1 MDCPUCFG_H=_riscos.cfg PR_MD_CSRCS=riscos.c DSO_CFLAGS=-fPIC DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)' MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' ;; *-*-sco*) AC_DEFINE(XP_UNIX) AC_DEFINE(SCO) AC_DEFINE(sco) AC_DEFINE(SYSV) AC_DEFINE(_SVID3) AC_DEFINE(_PR_NEED_H_ERRNO) CC='cc -b elf -KPIC' CXX='$(NSDEPTH)/build/hcpp CC +.cpp +w' USE_NSPR_THREADS=1 CPU_ARCH=x86 DSO_LDOPTS='-b elf -G' MDCPUCFG_H=_scoos.cfg PR_MD_SRCS=scoos.c ;; *-sinix*) AC_DEFINE(XP_UNIX) AC_DEFINE(SVR4) AC_DEFINE(SNI) AC_DEFINE(RELIANTUNIX) AC_DEFINE(sinix) AC_DEFINE(HAVE_SVID_GETTOD) if echo "$OS_TEST" | grep -c 86 2>/dev/null; then AC_DEFINE(i386) CPU_ARCH=x86 else CPU_ARCH=mips fi if test "$GNU_CC"; then AS='$(CC) -x assembler-with-cpp' if test "$CPU_ARCH" = "mips"; then LD=gld fi CFLAGS="$CFLAGS -Wall -Wno-format" else AS='/usr/bin/cc' _OPTIMIZE_FLAGS='-O -F Olimit,4000' fi DSO_LDOPTS='-G -z defs -h $(@:$(OBJDIR)/%.so=%.so)' if test "$OS_RELEASE" = "5.43"; then AC_DEFINE(IP_MULTICAST) fi OS_LIBS="$OS_LIBS -lsocket -lnsl -lresolv -ldl -lc" USE_NSPR_THREADS=1 MDCPUCFG_H=_reliantunix.cfg PR_MD_CSRCS=reliantunix.c if test "${OS_ARCH}" = "mips"; then PR_MD_ASFILES=os_ReliantUNIX.s fi ;; *-sunos*) AC_DEFINE(XP_UNIX) AC_DEFINE(SUNOS4) CFLAGS="$CFLAGS -Wall -Wno-format" if test "$USE_MDUPDATE"; then CFLAGS="$CFLAGS -MDupdate \$(DEPENDENCIES)" fi CPU_ARCH=sparc DLL_SUFFIX=so.1.0 DSO_LDOPTS= DSO_CFLAGS=-fPIC USE_NSPR_THREADS=1 if test "$OS_RELEASE" = "4.1.3_U1"; then _OPTIMIZE_FLAGS= OS_LIBS="$OS_LIBS -lm" fi MDCPUCFG_H=_sunos4.cfg PR_MD_CSRCS=sunos4.c ;; *-solaris*) if test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 fi AC_DEFINE(XP_UNIX) AC_DEFINE(SVR4) AC_DEFINE(SYSV) AC_DEFINE(__svr4) AC_DEFINE(__svr4__) AC_DEFINE(SOLARIS) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) CPU_ARCH=`uname -p` MDCPUCFG_H=_solaris.cfg PR_MD_CSRCS=solaris.c LD=/usr/ccs/bin/ld MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' RESOLVE_LINK_SYMBOLS=1 case "${OS_RELEASE}" in 5.8|5.9) ;; *) # It is safe to use the -Bdirect linker flag on Solaris 10 or later. USE_B_DIRECT=1 ;; esac if test -n "$GNU_CC"; then DSO_CFLAGS=-fPIC if `$CC -print-prog-name=ld` -v 2>&1 | grep -c GNU >/dev/null; then GCC_USE_GNU_LD=1 fi DSO_LDOPTS='-shared -Wl,-h,$(notdir $@),-z,combreloc,-z,defs,-z,ignore' if test -n "$USE_B_DIRECT"; then DSO_LDOPTS="$DSO_LDOPTS,-Bdirect" fi else DSO_CFLAGS=-KPIC DSO_LDOPTS='-G -h $(notdir $@) -z combreloc -z defs -z ignore' if test -n "$USE_B_DIRECT"; then DSO_LDOPTS="$DSO_LDOPTS -Bdirect" fi fi if test -n "$GNU_CC"; then CFLAGS="$CFLAGS -Wall" CXXFLAGS="$CXXFLAGS -Wall" if test -n "$USE_MDUPDATE"; then CFLAGS="$CFLAGS -MDupdate \$(DEPENDENCIES)" CXXFLAGS="$CXXFLAGS -MDupdate \$(DEPENDENCIES)" fi GCC_AS=`$CC -print-prog-name=as` if test "`echo | $GCC_AS -v 2>&1 | grep -c GNU`" != "0"; then GNU_AS=1 fi else CFLAGS="$CFLAGS -xstrconst" CXXFLAGS="$CXXFLAGS -Qoption cg -xstrconst -features=tmplife" if test -z "$MOZ_OPTIMIZE"; then CFLAGS="$CFLAGS -xs" CXXFLAGS="$CXXFLAGS -xs" fi _OPTIMIZE_FLAGS=-xO4 fi if test -z "$GNU_AS"; then ASFLAGS="$ASFLAGS -Wa,-P" fi if test -n "$USE_64"; then if test -n "$GNU_CC"; then CC="$CC -m64" CXX="$CXX -m64" else if test "$OS_TEST" = "i86pc"; then CC="$CC -xarch=amd64" CXX="$CXX -xarch=amd64" else CC="$CC -xarch=v9" CXX="$CXX -xarch=v9" fi fi fi if test "$OS_TEST" = "i86pc"; then if test -z "$USE_64"; then AC_DEFINE(i386) fi CPU_ARCH_TAG=_$OS_TEST # The default debug format, DWARF (-g), is not supported by gcc # on i386-ANY-sysv4/solaris, but the stabs format is. It is # assumed that the Solaris assembler /usr/ccs/bin/as is used. # If your gcc uses GNU as, you do not need the -Wa,-s option. if test -n "$MOZ_DEBUG" && test -n "$GNU_CC"; then _DEBUG_FLAGS=-gstabs if test -z "$GNU_AS"; then _DEBUG_FLAGS="$_DEBUG_FLAGS -Wa,-s" fi fi fi case "${target_os}" in solaris2.3*) AC_DEFINE(_PR_NO_LARGE_FILES) ;; solaris2.4*) AC_DEFINE(_PR_NO_LARGE_FILES) ;; solaris2.5*) AC_DEFINE(SOLARIS2_5) ;; *) AC_DEFINE(_PR_HAVE_OFF64_T) # The lfcompile64(5) man page on Solaris 2.6 says: # For applications that do not wish to conform to the POSIX or # X/Open specifications, the 64-bit transitional interfaces # are available by default. No compile-time flags need to be # set. # But gcc 2.7.2.x fails to define _LARGEFILE64_SOURCE by default. # The native compiler, gcc 2.8.x, and egcs don't have this problem. if test -n "$GNU_CC"; then AC_DEFINE(_LARGEFILE64_SOURCE) fi ;; esac case "${target_os}" in solaris2.3*) ;; solaris2.4*) ;; solaris2.5*) ;; solaris2.6*) ;; solaris2.7*) ;; *) # Solaris 8 or higher has IPv6. AC_DEFINE(_PR_INET6) ;; esac if test "$CPU_ARCH" = "sparc"; then # 64-bit Solaris SPARC requires V9 architecture, so the following # is not needed. if test -z "$USE_64"; then ULTRASPARC_LIBRARY=nspr_flt fi fi # Purify requires that binaries linked against nspr also # be linked against -lrt (or -lposix4) so add it to OS_LIBS _rev=`uname -r` _librt=`echo $_rev 5.6 | awk '{ if ($1 > $2) print "-lrt"; else print "-lposix4" }'` OS_LIBS="$OS_LIBS $_librt" ;; *-sco-sysv5*) AC_DEFINE(XP_UNIX) AC_DEFINE(UNIXWARE) AC_DEFINE(SVR4) AC_DEFINE(SYSV) USE_NSPR_THREADS=1 if echo $OS_RELEASE | grep -c 2.1 2>/dev/null; then AC_DEFINE(_PR_NO_LARGE_FILES) CC='$(NSDEPTH)/build/hcc cc' CXX='$(NSDEPTH)/build/hcpp CC' MDCPUCFG_H=_unixware.cfg else AC_DEFINE(_LARGEFILE64_SOURCE) AC_DEFINE(_PR_HAVE_OFF64_T) AC_DEFINE(_PR_HAVE_SOCKADDR_LEN) MDCPUCFG_H=_unixware7.cfg fi PR_MD_CSRCS=unixware.c DSO_LDOPTS=-G CPU_ARCH=x86 ;; *-symbian*) AC_ARG_WITH(symbian-sdk, [ --with-symbian-sdk=SYMBIAN_SDK_DIR The path to the Symbian SDK], SYMBIAN_SDK_DIR=$withval) echo ----------------------------------------------------------------------------- echo Building with Symbian SDK in: $SYMBIAN_SDK_DIR echo ----------------------------------------------------------------------------- AC_DEFINE(XP_UNIX) AC_DEFINE(SYMBIAN) AC_DEFINE(__arm__) AC_DEFINE(__SYMBIAN32__) AC_DEFINE(_UNICODE) AC_DEFINE(NDEBUG) AC_DEFINE(__SUPPORT_CPP_EXCEPTIONS__) AC_DEFINE(MOZ_STDERR_TO_STDOUT) AC_DEFINE(HAVE_FCNTL_FILE_LOCKING) AC_DEFINE(HAVE_SOCKLEN_T) USE_PTHREADS=1 LIB_SUFFIX=lib DLL_SUFFIX=dll MKSHLIB= DSO_LDOPTS= DSO_CFLAGS= VISIBILITY_FLAGS= MDCPUCFG_H=_symbian.cfg PR_MD_CSRCS=symbian.c NSINSTALL=nsinstall RANLIB='echo no ranlib ' CPU_ARCH=ARM OS_ARCH=SYMBIAN OS_EXE_CFLAGS="$OS_EXE_CFLAGS -D__EXE__" CFLAGS="$CFLAGS -MD -nostdinc" SYMBIAN_SYS_INCLUDE="-I$SYMBIAN_SDK_DIR/Epoc32/include/variant -I$SYMBIAN_SDK_DIR/Epoc32/include -I$SYMBIAN_SDK_DIR/Epoc32/include/stdapis" echo ------------------------------------------------------- echo SYMBIAN_SYS_INCLUDE is: $SYMBIAN_SYS_INCLUDE echo ------------------------------------------------------- case "$OS_TARGET" in WINSCW) CC=mwccsym2.exe CXX=mwccsym2.exe LD=mwldsym2.exe AR=mwldsym2.exe WINSCW_LD_DIR="\$(SYMBIAN_SDK_DIR)/EPOC32/RELEASE/WINSCW/UDEB" CFLAGS="$CFLAGS -O0 -inline off -wchar_t off -align 4 -warnings on -w nohidevirtual,nounusedexpr -msgstyle gcc -enum int -str pool -exc ms -trigraphs on -nostderr -gccdep -cwd source -i- -I\$(VPATH)" SYMBIAN_SYS_INCLUDE="$SYMBIAN_SYS_INCLUDE -include Symbian_OS_v9.2.hrh" AR_FLAGS="-library -msgstyle gcc -stdlib -subsystem windows -noimplib -o \$@" AC_DEFINE(_DEBUG) AC_DEFINE(__CW32__) AC_DEFINE(__WINS__) AC_DEFINE(__WINSCW__) DEFINES="$DEFINES -U_WIN32" ;; GCCE) CFLAGS="$CFLAGS -Wall -Wno-unknown-pragmas -fexceptions -march=armv5t -mapcs -pipe -x c -msoft-float" CXXFLAGS="$CXXFLAGS $CFLAGS -Wno-ctor-dtor-privacy" SYMBIAN_SYS_INCLUDE="$SYMBIAN_SYS_INCLUDE -include $SYMBIAN_SDK_DIR/EPOC32/INCLUDE/GCCE/GCCE.h" AC_DEFINE(__GCCE__) AC_DEFINE(__EABI__) DEFINES="$DEFINES -D__PRODUCT_INCLUDE__=$SYMBIAN_SDK_DIR/Epoc32/include/variant/Symbian_OS_v9.2.hrh" ;; *) AC_MSG_ERROR([Missing OS_TARGET for ${target}. Set --enable-symbian-target to with 'WINSCW' or 'GCCE'.]) ;; esac CFLAGS="$CFLAGS ${SYMBIAN_SYS_INCLUDE}" ;; *-os2*) AC_DEFINE(XP_OS2) AC_DEFINE(XP_PC) AC_DEFINE(BSD_SELECT) AC_DEFINE(TCPV40HDRS) LIB_SUFFIX=lib DLL_SUFFIX=dll RC=rc.exe PR_MD_ARCH_DIR=os2 PROG_SUFFIX=.exe NSINSTALL=nsinstall MDCPUCFG_H=_os2.cfg RESOLVE_LINK_SYMBOLS=1 AC_DEFINE(OS2) AR=emxomfar AR_FLAGS='r $@' CFLAGS="$CFLAGS -Wall -Zomf" CXXFLAGS="$CFLAGS -Wall -Zomf" MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@' DSO_CFLAGS= DSO_LDOPTS='-Zomf -Zdll' LDFLAGS='-Zmap' _OPTIMIZE_FLAGS="-O2 -s" _DEBUG_FLAGS="-g -fno-inline" if test -n "$MOZ_OPTIMIZE"; then DSO_LDOPTS="$DSO_LDOPTS -Zlinker /EXEPACK:2 -Zlinker /PACKCODE -Zlinker /PACKDATA" fi IMPLIB='emximp -o' FILTER='emxexp -o' if test -n "$MOZ_OS2_HIGH_MEMORY"; then LDFLAGS="$LDFLAGS -Zhigh-mem" AC_DEFINE(MOZ_OS2_HIGH_MEMORY) fi # GCC for OS/2 currently predefines these, but we don't want them DEFINES="$DEFINES -Uunix -U__unix -U__unix__" ;; *) AC_DEFINE(XP_UNIX) ;; esac if test -z "$SKIP_LIBRARY_CHECKS"; then dnl ======================================================== dnl Check for system libraries dnl ======================================================== dnl AC_CHECK_LIB(C, main) dnl AC_CHECK_LIB(C_r, main) dnl AC_CHECK_LIB(c, main) dnl AC_CHECK_LIB(c_r, main) dnl AC_CHECK_LIB(dce, main) dnl AC_CHECK_LIB(dl, main) dnl AC_CHECK_LIB(dld, main) dnl AC_CHECK_LIB(gen, main) dnl AC_CHECK_LIB(ip6, main) dnl AC_CHECK_LIB(l, main) dnl AC_CHECK_LIB(m, main) dnl AC_CHECK_LIB(nsl, main) dnl AC_CHECK_LIB(posix4, main) dnl AC_CHECK_LIB(prstrms, main) dnl AC_CHECK_LIB(prstrms_shr, main) dnl AC_CHECK_LIB(pthread, main) dnl AC_CHECK_LIB(pthreads, main) dnl AC_CHECK_LIB(resolv, main) dnl AC_CHECK_LIB(rt, main) dnl AC_CHECK_LIB(socket, main) dnl AC_CHECK_LIB(svld, main) dnl AC_CHECK_LIB(thread, main) dnl AC_CHECK_LIB(vms_jackets, main) dnl We don't want anything to link with libdl even if it's present on OS X, dnl since it's not used and not part of the default installation. dnl The same goes for BeOS. dnl OS/2 has dlfcn in libc. case $target in *-darwin*|*-beos*|*-os2*) ;; *) AC_CHECK_LIB(dl, dlopen, AC_CHECK_HEADER(dlfcn.h, OS_LIBS="-ldl $OS_LIBS")) ;; esac dnl ======================================================== dnl Check for system header files. dnl ======================================================== dnl AC_HEADER_DIRENT dnl AC_HEADER_STDC dnl AC_HEADER_SYS_WAIT dnl AC_CHECK_HEADERS(fcntl.h limits.h sys/file.h sys/ioctl.h sys/time.h unistd.h) dnl ======================================================== dnl Check for typedefs and structs dnl ======================================================== dnl AC_C_CONST dnl AC_TYPE_UID_T dnl AC_TYPE_MODE_T dnl AC_TYPE_OFF_T dnl AC_TYPE_PID_T dnl AC_TYPE_SIZE_T dnl AC_STRUCT_ST_BLKSIZE dnl AC_STRUCT_ST_BLOCKS dnl AC_STRUCT_ST_RDEV dnl AC_HEADER_TIME dnl AC_STRUCT_TM dnl ======================================================== dnl Checks for library functions. dnl ======================================================== AC_PROG_GCC_TRADITIONAL AC_CHECK_FUNCS(lchown strerror) dnl AC_FUNC_MEMCMP dnl AC_FUNC_MMAP dnl AC_FUNC_SETVBUF_REVERSED dnl AC_FUNC_STRCOLL dnl AC_FUNC_STRFTIME dnl AC_FUNC_UTIME_NULL dnl AC_FUNC_VPRINTF dnl AC_CHECK_FUNCS(ftime getcwd gethostname gettimeofday getwd mkdir mktime putenv rmdir select socket strdup strerror strstr strtol strtoul uname) dnl ======================================================== dnl Check options dnl ======================================================== dnl ====================================================== dnl = Enable compiling with ccache dnl ====================================================== AC_ARG_WITH(ccache, [ --with-ccache[=path/to/ccache] Enable compiling with ccache], CCACHE=$withval, CCACHE="no") if test "$CCACHE" != "no"; then if test -n "$CCACHE"; then if test "$CCACHE" = "yes"; then CCACHE= else if test ! -e "$CCACHE"; then AC_MSG_ERROR([$CCACHE not found]) fi fi fi AC_PATH_PROGS(CCACHE, $CCACHE ccache) if test -z "$CCACHE" -o "$CCACHE" = ":"; then AC_MSG_ERROR([ccache not found]) elif test -x "$CCACHE"; then CC="$CCACHE $CC" CXX="$CCACHE $CXX" else AC_MSG_ERROR([$CCACHE is not executable]) fi fi dnl ======================================================== dnl = dnl = --enable-strip dnl = dnl = Enable stripping of libs and executables dnl = dnl ======================================================== AC_ARG_ENABLE(strip, [ --enable-strip Enable stripping of shared libs and programs], [ if test "$enableval" = "yes"; then ENABLE_STRIP=1 fi ]) dnl Check for hpux options case "${target_os}" in hpux*) if test -z "$GNU_CC"; then AC_CACHE_CHECK(for +Olit support, ac_cv_hpux_usable_olit_option, dnl since aCC doesn't throw an error on invalid options, dnl we have to test this the hard way [ac_cv_hpux_usable_olit_option=no rm -f conftest* echo 'int main() { return 0; }' | cat > conftest.c ${CC-cc} ${CFLAGS} +Olit=all -o conftest conftest.c > conftest.out 2>&1 if test $? -eq 0; then if test -z "`egrep -i '(unrecognize|unknown)' conftest.out`"; then ac_cv_hpux_usable_olit_option=yes fi fi rm -f conftest* ]) if test "$ac_cv_hpux_usable_olit_option" = "yes"; then CFLAGS="$CFLAGS +Olit=all" CXXFLAGS="$CXXFLAGS +Olit=all" else CFLAGS="$CFLAGS +ESlit" CXXFLAGS="$CXXFLAGS +ESlit" fi fi ;; esac dnl dnl Apparently, some systems cannot properly check for the pthread dnl library unless <pthread.h> is included so we need to test dnl using it dnl dnl MOZ_CHECK_PTHREADS(lib, success, failure) AC_DEFUN(MOZ_CHECK_PTHREADS, [ AC_MSG_CHECKING([for pthread_create in -l$1]) echo " #include <pthread.h> void *foo(void *v) { return v; } int main() { pthread_t t; if (!pthread_create(&t, 0, &foo, 0)) { pthread_join(t, 0); } return 0; }" > dummy.c ; echo "${CC-cc} -o dummy${ac_exeext} dummy.c $CFLAGS $CPPFLAGS -l[$1] $LDFLAGS $LIBS" 1>&5; ${CC-cc} -o dummy${ac_exeext} dummy.c $CFLAGS $CPPFLAGS -l[$1] $LDFLAGS $LIBS 2>&5; _res=$? ; rm -f dummy.c dummy${ac_exeext} ; if test "$_res" = "0"; then AC_MSG_RESULT([yes]) [$2] else AC_MSG_RESULT([no]) [$3] fi ]) case "$target_os" in darwin*) _HAVE_PTHREADS=1 ;; wince*) _HAVE_PTHREADS= ;; *) MOZ_CHECK_PTHREADS(pthreads, _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthreads", MOZ_CHECK_PTHREADS(pthread, _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthread", MOZ_CHECK_PTHREADS(c_r, _HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lc_r", MOZ_CHECK_PTHREADS(c, _HAVE_PTHREADS=1 ) ) ) ) ;; esac AC_ARG_WITH(pthreads, [ --with-pthreads Use system pthreads library as thread subsystem], [ if test "$withval" = "yes"; then if test -n "$_HAVE_PTHREADS"; then USE_PTHREADS=1 USE_USER_PTHREADS= USE_NSPR_THREADS= else AC_MSG_ERROR([ --with-pthreads specified for a system without pthread support ]); fi else USE_PTHREADS= _PTHREAD_LDFLAGS= fi], [ if test -n "$_HAVE_PTHREADS" && test -z "$USE_USER_PTHREADS" && test -z "$USE_NSPR_THREADS"; then USE_PTHREADS=1 USE_USER_PTHREADS= USE_NSPR_THREADS= fi]) AC_ARG_ENABLE(user-pthreads, [ --enable-user-pthreads Build using userland pthreads], [ if test "$enableval" = "yes"; then if test -n "$_HAVE_PTHREADS"; then USE_PTHREADS= USE_USER_PTHREADS=1 USE_NSPR_THREADS= else AC_MSG_ERROR([ --enable-user-pthreads specified for a system without pthread support ]); fi fi]) AC_ARG_ENABLE(nspr-threads, [ --enable-nspr-threads Build using classic nspr threads], [ if test "$enableval" = "yes"; then USE_PTHREADS= USE_USER_PTHREADS= USE_NSPR_THREADS=1 fi]) case "$target" in *-beos*) AC_ARG_WITH(bthreads, [ --with-bthreads Use system bthreads library as thread subsystem (BeOS only)], [ if test "$withval" = "yes"; then USE_BTHREADS=1 USE_USER_PTHREADS= USE_PTHREADS= fi]) ;; esac fi # SKIP_LIBRARY_CHECKS AC_ARG_ENABLE(ipv6, [ --enable-ipv6 Compile ipv6 support], [ if test "$enableval" = "yes"; then USE_IPV6=1 else USE_IPV6= fi]) if test -n "$USE_PTHREADS"; then dnl See if -pthread is supported. rm -f conftest* ac_cv_have_dash_pthread=no AC_MSG_CHECKING(whether ${CC-cc} accepts -pthread) echo 'int main() { return 0; }' | cat > conftest.c ${CC-cc} -pthread -o conftest conftest.c > conftest.out 2>&1 if test $? -eq 0; then if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthread`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then ac_cv_have_dash_pthread=yes case "$target_os" in freebsd*) # Freebsd doesn't use -pthread for compiles, it uses them for linking ;; *) CFLAGS="$CFLAGS -pthread" CXXFLAGS="$CXXFLAGS -pthread" ;; esac fi fi rm -f conftest* AC_MSG_RESULT($ac_cv_have_dash_pthread) dnl dnl See if -pthreads is supported. dnl ac_cv_have_dash_pthreads=no if test "$ac_cv_have_dash_pthread" = "no"; then AC_MSG_CHECKING(whether ${CC-cc} accepts -pthreads) echo 'int main() { return 0; }' | cat > conftest.c ${CC-cc} -pthreads -o conftest conftest.c > conftest.out 2>&1 if test $? -eq 0; then if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthreads`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then ac_cv_have_dash_pthreads=yes CFLAGS="$CFLAGS -pthreads" CXXFLAGS="$CXXFLAGS -pthreads" fi fi rm -f conftest* AC_MSG_RESULT($ac_cv_have_dash_pthreads) fi case "$target" in *-solaris*) if test "$ac_cv_have_dash_pthreads" = "yes"; then _PTHREAD_LDFLAGS= fi ;; *-freebsd*) AC_DEFINE(_REENTRANT) AC_DEFINE(_THREAD_SAFE) dnl -pthread links in -lc_r, so don't specify it explicitly. if test "$ac_cv_have_dash_pthread" = "yes"; then _PTHREAD_LDFLAGS="-pthread" else _PTHREAD_LDFLAGS="-lc_r" fi ;; *-netbsd*) if test "$ac_cv_have_dash_pthread" = "yes"; then _PTHREAD_LDFLAGS="-pthread" fi ;; *-bsdi*) AC_DEFINE(_THREAD_SAFE) dnl -pthread links in -lc_r, so don't specify it explicitly. if test "$ac_cv_have_dash_pthread" = "yes"; then _PTHREAD_LDFLAGS= fi ;; *-openbsd*) if test "$ac_cv_have_dash_pthread" = "yes"; then _PTHREAD_LDFLAGS=-pthread fi ;; *-linux*|*-gnu*|*-k*bsd*-gnu) AC_DEFINE(_REENTRANT) ;; esac else if test -n "$USE_USER_PTHREADS"; then USE_PTHREADS= USE_NSPR_THREADS= else _PTHREAD_LDFLAGS= fi fi dnl Special thread exceptions case "$target" in *-aix*) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi case "$target_os" in aix4.1*) if test -z "$USE_PTHREADS"; then AC_DEFINE(AIX_RENAME_SELECT) fi ;; aix4.2*) if test -z "$USE_NSPR_THREADS"; then AC_DEFINE(HAVE_POINTER_LOCALTIME_R) fi ;; aix4.3*) if test -z "$USE_NSPR_THREADS"; then AC_DEFINE(HAVE_POINTER_LOCALTIME_R) fi if test -n "$USE_PTHREADS"; then AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST) fi ;; *) if test -z "$USE_NSPR_THREADS"; then AC_DEFINE(HAVE_POINTER_LOCALTIME_R) fi if test -n "$USE_PTHREADS"; then AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST) fi ;; esac ;; *-bsdi*) if test -n "$USE_PTHREADS"; then AC_DEFINE(_PR_NEED_PTHREAD_INIT) fi ;; *-freebsd*) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi ;; *-hpux*) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi if test "$USE_PTHREADS"; then if echo "$OS_RELEASE" | egrep '^(B.10.10|B.10.20)' >/dev/null; then AC_DEFINE(_REENTRANT) AC_DEFINE(_PR_DCETHREADS) else AC_DEFINE_UNQUOTED(_POSIX_C_SOURCE,199506L) AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST) fi fi if test "$USE_USER_PTHREADS"; then AC_DEFINE_UNQUOTED(_POSIX_C_SOURCE,199506L) fi ;; *-irix*) if test "${target_os}" = "irix6.5"; then if test -n "$USE_PTHREADS"; then AC_DEFINE(_PR_HAVE_GETHOST_R) AC_DEFINE(_PR_HAVE_GETHOST_R_POINTER) fi fi ;; *-linux*|*-gnu*|*-k*bsd*-gnu) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi ;; *-mingw*|*-cygwin*|*-msvc*|*-mks*|*-wince*|*-winmo*|*-os2*|*-beos*) dnl win32, wince, os2 & beos cannot use pthreads USE_PTHREADS= _PTHREAD_LDFLAGS= USE_USER_PTHREADS= ;; *-netbsd*|*-openbsd*) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi ;; *-osf*) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi if test -n "$USE_PTHREADS"; then if echo $OS_RELEASE | egrep -c '(V2.0|V3.2)' 2>/dev/null; then : else AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST) fi fi ;; *-solaris*) if test -n "$USE_NSPR_THREADS"; then AC_DEFINE(_PR_LOCAL_THREADS_ONLY) fi if test -n "$USE_PTHREADS"; then AC_DEFINE(_REENTRANT) AC_DEFINE(HAVE_POINTER_LOCALTIME_R) if test "$OS_TEST" = "i86pc"; then if test -n "$USE_64"; then PR_MD_ASFILES=os_SunOS_x86_64.s else PR_MD_ASFILES=os_SunOS_x86.s fi else if test -n "$USE_64"; then PR_MD_ASFILES=os_SunOS_sparcv9.s fi fi fi ;; *-nto*) if test -n "$USE_PTHREADS"; then AC_DEFINE(_PR_HAVE_GETHOST_R) AC_DEFINE(_PR_HAVE_GETHOST_R_POINTER) fi ;; esac OS_LIBS="$_PTHREAD_LDFLAGS $OS_LIBS" dnl If the user passed in arg to --enable-optimize or --enable-debug, dnl make sure that we use it. if test -n "$_SAVE_OPTIMIZE_FLAGS"; then _OPTIMIZE_FLAGS="$_SAVE_OPTIMIZE_FLAGS" fi if test -n "$_SAVE_DEBUG_FLAGS"; then _DEBUG_FLAGS="$_SAVE_DEBUG_FLAGS" fi if test -n "$MOZ_OPTIMIZE"; then CFLAGS="$CFLAGS $_OPTIMIZE_FLAGS" CXXFLAGS="$CXXFLAGS $_OPTIMIZE_FLAGS" fi if test -n "$MOZ_DEBUG_SYMBOLS"; then CFLAGS="$CFLAGS $_DEBUG_FLAGS" CXXFLAGS="$CXXFLAGS $_DEBUG_FLAGS" fi if test -n "$MOZ_OPTIMIZE"; then OBJDIR_TAG=_OPT else OBJDIR_TAG=_DBG fi if test -n "$USE_64"; then COMPILER_TAG=_64 fi RELEASE_OBJDIR_NAME="${OS_CONFIG}${CPU_ARCH_TAG}${COMPILER_TAG}${IMPL_STRATEGY}${OBJDIR_TAG}.${OBJDIR_SUFFIX}" dnl ======================================================== dnl Use cygwin wrapper for win32 builds, except MSYS/MinGW dnl ======================================================== case "$target_os" in cygwin*|msvc*|mks*) CC="\$(CYGWIN_WRAPPER) $CC" CXX="\$(CYGWIN_WRAPPER) $CXX" RC="\$(CYGWIN_WRAPPER) $RC" ;; esac dnl ======================================================== dnl = Use malloc wrapper lib dnl ======================================================== AC_ARG_ENABLE(wrap-malloc, [ --enable-wrap-malloc Wrap malloc calls (gnu linker only)], [ if test "$enableval" = "yes"; then _WRAP_MALLOC=1 fi ]) if test -n "$_WRAP_MALLOC"; then if test -n "$GNU_CC"; then WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=malloc,--wrap=calloc,--wrap=valloc,--wrap=free,--wrap=realloc,--wrap=memalign" WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=__builtin_new,--wrap=__builtin_vec_new,--wrap=__builtin_delete,--wrap=__builtin_vec_delete" WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=PR_Free,--wrap=PR_Malloc,--wrap=PR_Calloc,--wrap=PR_Realloc" WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=strdup,--wrap=strndup" WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=posix_memalign,--wrap=malloc_usable_size" else AC_MSG_ERROR([--enable-wrap-malloc is not supported for non-GNU toolchains]) fi fi dnl ======================================================== dnl = Location of malloc wrapper lib dnl ======================================================== AC_ARG_WITH(wrap-malloc, [ --with-wrap-malloc=SHAREDLIB Location of malloc wrapper library], WRAP_LDFLAGS="${WRAP_LDFLAGS} $withval") dnl ======================================================== dnl Substitution of found variables. dnl ======================================================== AC_SUBST(SHELL_OVERRIDE) AC_SUBST(MOZILLA_CLIENT) AC_SUBST(CC) AC_SUBST(CXX) AC_SUBST(CFLAGS) AC_SUBST(CXXFLAGS) AC_SUBST(CPPFLAGS) AC_SUBST(HOST_CC) AC_SUBST(HOST_CFLAGS) AC_SUBST(LDFLAGS) AC_SUBST(HOST_LDFLAGS) AC_SUBST(GNU_CC) AC_SUBST(GCC_USE_GNU_LD) AC_SUBST(MSC_VER) AC_SUBST(CROSS_COMPILE) AC_SUBST(MOZ_OPTIMIZE) AC_SUBST(MOZ_DEBUG) AC_SUBST(MOZ_DEBUG_SYMBOLS) AC_SUBST(USE_CPLUS) AC_SUBST(USE_IPV6) AC_SUBST(USE_N32) AC_SUBST(USE_64) AC_SUBST(OBJECT_MODE) AC_SUBST(ENABLE_STRIP) AC_SUBST(USE_PTHREADS) AC_SUBST(USE_BTHREADS) AC_SUBST(USE_USER_PTHREADS) AC_SUBST(USE_NSPR_THREADS) AC_SUBST(LIBNSPR) AC_SUBST(LIBPLC) AC_SUBST(MOD_MAJOR_VERSION) AC_SUBST(MOD_MINOR_VERSION) AC_SUBST(MOD_PATCH_VERSION) AC_SUBST(NSPR_MODNAME) AC_SUBST(MDCPUCFG_H) AC_SUBST(PR_MD_CSRCS) AC_SUBST(PR_MD_ASFILES) AC_SUBST(PR_MD_ARCH_DIR) AC_SUBST(CPU_ARCH) AC_SUBST(OBJ_SUFFIX) AC_SUBST(LIB_SUFFIX) AC_SUBST(DLL_SUFFIX) AC_SUBST(ASM_SUFFIX) AC_SUBST(WRAP_LDFLAGS) AC_SUBST(MKSHLIB) AC_SUBST(DSO_CFLAGS) AC_SUBST(DSO_LDOPTS) AC_SUBST(OS_TARGET) AC_SUBST(OS_ARCH) AC_SUBST(OS_RELEASE) AC_SUBST(OS_TEST) AC_SUBST(MACOSX_DEPLOYMENT_TARGET) AC_SUBST(DEFINES) AC_SUBST(DEFS) AC_SUBST(AR) AC_SUBST(AR_FLAGS) AC_SUBST(AS) AC_SUBST(ASFLAGS) AC_SUBST(LD) AC_SUBST(RANLIB) AC_SUBST(PERL) AC_SUBST(STRIP) AC_SUBST(FILTER) AC_SUBST(IMPLIB) AC_SUBST(PROFILE_GEN_CFLAGS) AC_SUBST(PROFILE_GEN_LDFLAGS) AC_SUBST(PROFILE_USE_CFLAGS) AC_SUBST(PROFILE_USE_LDFLAGS) AC_SUBST(OS_LIBS) AC_SUBST(RESOLVE_LINK_SYMBOLS) AC_SUBST(AIX_LINK_OPTS) AC_SUBST(NOSUCHFILE) AC_SUBST(MOZ_OBJFORMAT) AC_SUBST(ULTRASPARC_LIBRARY) AC_SUBST(OBJDIR) AC_SUBST(OBJDIR_NAME) AC_SUBST(RELEASE_OBJDIR_NAME) AC_SUBST(NSINSTALL) AC_SUBST(OPTIMIZER) AC_SUBST(RC) AC_SUBST(RCFLAGS) AC_SUBST(DLLFLAGS) AC_SUBST(EXEFLAGS) AC_SUBST(OS_DLLFLAGS) AC_SUBST(CYGWIN_WRAPPER) AC_SUBST(VISIBILITY_FLAGS) AC_SUBST(WRAP_SYSTEM_INCLUDES) AC_SUBST(MACOS_SDK_DIR) AC_SUBST(SYMBIAN_SDK_DIR) AC_SUBST(NEXT_ROOT) AC_SUBST(MT) dnl ======================================================== dnl Generate output files. dnl ======================================================== MAKEFILES=" Makefile config/Makefile config/autoconf.mk config/nsprincl.mk config/nsprincl.sh config/nspr-config lib/Makefile lib/ds/Makefile lib/libc/Makefile lib/libc/include/Makefile lib/libc/src/Makefile lib/tests/Makefile pkg/Makefile pr/Makefile pr/include/Makefile pr/include/md/Makefile pr/include/obsolete/Makefile pr/include/private/Makefile pr/src/Makefile pr/src/io/Makefile pr/src/linking/Makefile pr/src/malloc/Makefile pr/src/md/Makefile pr/src/md/${PR_MD_ARCH_DIR}/Makefile pr/src/memory/Makefile pr/src/misc/Makefile pr/src/threads/Makefile pr/tests/Makefile pr/tests/dll/Makefile " if test "$OS_TARGET" = "Linux"; then MAKEFILES="$MAKEFILES pkg/linux/Makefile " elif test "$OS_TARGET" = "SunOS"; then MAKEFILES="$MAKEFILES pkg/solaris/Makefile pkg/solaris/SUNWpr/Makefile pkg/solaris/SUNWprd/Makefile " fi if test -z "$USE_PTHREADS" && test -z "$USE_BTHREADS"; then MAKEFILES="$MAKEFILES pr/src/threads/combined/Makefile " elif test -n "$USE_PTHREADS"; then MAKEFILES="$MAKEFILES pr/src/pthreads/Makefile " elif test -n "$USE_BTHREADS"; then MAKEFILES="$MAKEFILES pr/src/bthreads/Makefile " fi if test -n "$USE_CPLUS"; then MAKEFILES="$MAKEFILES pr/src/cplus/Makefile pr/src/cplus/tests/Makefile " fi echo $MAKEFILES > unallmakefiles AC_OUTPUT([$MAKEFILES], [chmod +x config/nspr-config])