/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- * * The contents of this file are subject to the Netscape Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/NPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is mozilla.org code. * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1998 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): */ /* * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! * NOTE!! This is not a general class, but specific to layout and frames. * Consumers looking for the general selection interface should look at * nsISelection. */ #ifndef nsIFrameSelection_h___ #define nsIFrameSelection_h___ #include "nsISupports.h" #include "nsIFrame.h" #include "nsIFocusTracker.h" #include "nsISelection.h" #include "nsIPresShell.h" #include "nsIContent.h" #include "nsCOMPtr.h" #include "nsIStyleContext.h" #include "nsISelectionController.h" // IID for the nsIFrameSelection interface #define NS_IFRAMESELECTION_IID \ { 0xf46e4171, 0xdeaa, 0x11d1, \ { 0x97, 0xfc, 0x0, 0x60, 0x97, 0x3, 0xc1, 0x4e } } //---------------------------------------------------------------------- // Selection interface struct SelectionDetails { PRInt32 mStart; PRInt32 mEnd; SelectionType mType; SelectionDetails *mNext; }; /*PeekOffsetStruct * @param mTracker is used to get the PresContext usefull for measuring text ect. * @param mDesiredX is the "desired" location of the new caret * @param mAmount eWord, eCharacter, eLine * @param mDirection enum defined in this file to be eForward or eBackward * @param mStartOffset start offset to start the peek. 0 == beginning -1 = end * @param mResultContent content that actually is the next/previous * @param mResultOffset offset for result content * @param mResultFrame resulting frame for peeking * @param mEatingWS boolean to tell us the state of our search for Next/Prev * @param mPreferLeft true = prev line end, false = next line begin * @param mJumpLines if this is true then its ok to cross lines while peeking */ struct nsPeekOffsetStruct { void SetData(nsIFocusTracker *aTracker, nscoord aDesiredX, nsSelectionAmount aAmount, nsDirection aDirection, PRInt32 aStartOffset, PRBool aEatingWS, PRBool aPreferLeft, PRBool aJumpLines) { mTracker=aTracker;mDesiredX=aDesiredX;mAmount=aAmount; mDirection=aDirection;mStartOffset=aStartOffset;mEatingWS=aEatingWS; mPreferLeft=aPreferLeft;mJumpLines = aJumpLines; } nsIFocusTracker *mTracker; nscoord mDesiredX; nsSelectionAmount mAmount; nsDirection mDirection; PRInt32 mStartOffset; nsCOMPtr mResultContent; PRInt32 mContentOffset; PRInt32 mContentOffsetEnd; nsIFrame *mResultFrame; PRBool mEatingWS; PRBool mPreferLeft; PRBool mJumpLines; }; class nsIScrollableView; class nsIFrameSelection : public nsISupports { public: static const nsIID& GetIID() { static nsIID iid = NS_IFRAMESELECTION_IID; return iid; } enum HINT {HINTLEFT=0,HINTRIGHT=1}mHint;//end of this line or beginning of next /** Init will initialize the frame selector with the necessary focus tracker to * be used by most of the methods * @param aTracker is the parameter to be used for most of the other calls for callbacks ect * @param aLimiter limits the selection to nodes with aLimiter parents */ NS_IMETHOD Init(nsIFocusTracker *aTracker, nsIContent *aLimiter) = 0; //default since this isnt used for embedding /* SetScrollView sets the scroll view * @param aScrollView is thr scroll view for this selection. */ NS_IMETHOD SetScrollableView(nsIScrollableView *aScrollView) =0; /** ShutDown will be called when the owner of the frame selection is shutting down * this should be the time to release all member variable interfaces. all methods * called after ShutDown should return NS_ERROR_FAILURE */ NS_IMETHOD ShutDown() = 0; /** HandleKeyEvent will accept an event and frame and * will return NS_OK if it handles the event or NS_COMFALSE if not. *

DOES NOT ADDREF

* @param aGuiEvent is the event that should be dealt with by aFocusFrame * @param aFrame is the frame that MAY handle the event */ NS_IMETHOD HandleTextEvent(nsGUIEvent *aGuiEvent) = 0; /** HandleKeyEvent will accept an event and frame and * will return NS_OK if it handles the event or NS_COMFALSE if not. *

DOES NOT ADDREF

* @param aGuiEvent is the event that should be dealt with by aFocusFrame * @param aFrame is the frame that MAY handle the event */ NS_IMETHOD HandleKeyEvent(nsIPresContext* aPresContext, nsGUIEvent *aGuiEvent) = 0; /** HandleClick will take the focus to the new frame at the new offset and * will either extend the selection from the old anchor, or replace the old anchor. * the old anchor and focus position may also be used to deselect things * @param aNewfocus is the content that wants the focus * @param aContentOffset is the content offset of the parent aNewFocus * @param aContentOffsetEnd is the content offset of the parent aNewFocus and is specified different * when you need to select to and include both start and end points * @param aContinueSelection is the flag that tells the selection to keep the old anchor point or not. * @param aMultipleSelection will tell the frame selector to replace /or not the old selection. * cannot coexist with aContinueSelection * @param aHint will tell the selection which direction geometrically to actually show the caret on. * 1 = end of this line 0 = beggining of this line */ NS_IMETHOD HandleClick(nsIContent *aNewFocus, PRUint32 aContentOffset, PRUint32 aContentEndOffset , PRBool aContinueSelection, PRBool aMultipleSelection, PRBool aHint) = 0; /** HandleDrag extends the selection to contain the frame closest to aPoint. * @param aPresContext is the context to use when figuring out what frame contains the point. * @param aFrame is the parent of all frames to use when searching for the closest frame to the point. * @param aPoint is relative to aFrame's parent view. */ NS_IMETHOD HandleDrag(nsIPresContext *aPresContext, nsIFrame *aFrame, nsPoint& aPoint) = 0; /** HandleTableSelection will set selection to a table, cell, etc * depending on information contained in aFlags * @param aParentContent is the paretent of either a table or cell that user clicked or dragged the mouse in * @param aContentOffset is the offset of the table or cell * @param aTarget indicates what to select (defined in nsISelectionPrivate.idl/nsISelectionPrivate.h): * TABLESELECTION_CELL We should select a cell (content points to the cell) * TABLESELECTION_ROW We should select a row (content points to any cell in row) * TABLESELECTION_COLUMN We should select a row (content points to any cell in column) * TABLESELECTION_TABLE We should select a table (content points to the table) * TABLESELECTION_ALLCELLS We should select all cells (content points to any cell in table) * @param aMouseEvent passed in so we we can get where event occured and what keys are pressed */ NS_IMETHOD HandleTableSelection(nsIContent *aParentContent, PRInt32 aContentOffset, PRInt32 aTarget, nsMouseEvent *aMouseEvent) = 0; /** StartAutoScrollTimer is responsible for scrolling the view so that aPoint is always * visible, and for selecting any frame that contains aPoint. The timer will also reset * itself to fire again if the view has not scrolled to the end of the document. * @param aPresContext is the context to use when figuring out what frame contains the point. * @param aFrame is the parent of all frames to use when searching for the closest frame to the point. * @param aPoint is relative to aFrame's parent view. * @param aDelay is the timer's interval. */ NS_IMETHOD StartAutoScrollTimer(nsIPresContext *aPresContext, nsIFrame *aFrame, nsPoint& aPoint, PRUint32 aDelay) = 0; /** StopAutoScrollTimer stops any active auto scroll timer. */ NS_IMETHOD StopAutoScrollTimer() = 0; /** EnableFrameNotification * mutch like start batching, except all dirty calls are ignored. no notifications will go * out until enableNotifications with a PR_TRUE is called */ NS_IMETHOD EnableFrameNotification(PRBool aEnable) = 0; /** Lookup Selection * returns in frame coordinates the selection beginning and ending with the type of selection given * @param aContent is the content asking * @param aContentOffset is the starting content boundary * @param aContentLength is the length of the content piece asking * @param aReturnDetails linkedlist of return values for the selection. * @param aSlowCheck will check using slow method with no shortcuts */ NS_IMETHOD LookUpSelection(nsIContent *aContent, PRInt32 aContentOffset, PRInt32 aContentLength, SelectionDetails **aReturnDetails, PRBool aSlowCheck) = 0; /** SetMouseDownState(PRBool); * sets the mouse state to aState for resons of drag state. * @param aState is the new state of mousedown */ NS_IMETHOD SetMouseDownState(PRBool aState)=0; /** GetMouseDownState(PRBool *); * gets the mouse state to aState for resons of drag state. * @param aState will hold the state of mousedown */ NS_IMETHOD GetMouseDownState(PRBool *aState)=0; /** if we are in table cell selection mode. aka ctrl click in table cell */ NS_IMETHOD GetTableCellSelection(PRBool *aState)=0; /** GetTableCellSelectionStyleColor * this holds the color of the selection for table cells when they are selected. */ NS_IMETHOD GetTableCellSelectionStyleColor(const nsStyleColor **aStyleColor)=0; /** GetSelection * no query interface for selection. must use this method now. * @param aSelectionType enum value defined in nsISelection for the seleciton you want. */ NS_IMETHOD GetSelection(SelectionType aSelectionType, nsISelection **aSelection)=0; /** * ScrollSelectionIntoView scrolls a region of the selection, * so that it is visible in the scrolled view. * * @param aType the selection to scroll into view. * @param aRegion the region inside the selection to scroll into view. */ NS_IMETHOD ScrollSelectionIntoView(SelectionType aSelectionType, SelectionRegion aRegion)=0; /** RepaintSelection repaints the selected frames that are inside the selection * specified by aSelectionType. * @param aSelectionType enum value defined in nsISelection for the seleciton you want. */ NS_IMETHOD RepaintSelection(nsIPresContext* aPresContext, SelectionType aSelectionType)=0; /** GetFrameForNodeOffset given a node and its child offset, return the nsIFrame and * the offset into that frame. * @param aNode input parameter for the node to look at * @param aOffset offset into above node. * @param aReturnFrame will contain the return frame. MUST NOT BE NULL or will return error * @param aReturnOffset will contain offset into frame. */ NS_IMETHOD GetFrameForNodeOffset(nsIContent *aNode, PRInt32 aOffset, HINT aHint, nsIFrame **aReturnFrame, PRInt32 *aReturnOffset)=0; /** AdjustOffsetsFromStyle. Called after detecting that a click or drag will * select the frame, this function looks for user-select style on that frame or a parent * frame, and adjust the content and offsets accordingly. * @param aFrame the frame that was clicked * @param outContent content node to be selected * @param outStartOffset selection start offset * @param outEndOffset selection end offset */ NS_IMETHOD AdjustOffsetsFromStyle(nsIFrame *aFrame, PRBool *changeSelection, nsIContent** outContent, PRInt32* outStartOffset, PRInt32* outEndOffset)=0; NS_IMETHOD GetHint(HINT *aHint)=0; NS_IMETHOD SetHint(HINT aHint)=0; /** CharacterMove will generally be called from the nsiselectioncontroller implementations. * the effect being the selection will move one character left or right. * @param aForward move forward in document. * @param aExtend continue selection */ NS_IMETHOD CharacterMove(PRBool aForward, PRBool aExtend)=0; /** WordMove will generally be called from the nsiselectioncontroller implementations. * the effect being the selection will move one word left or right. * @param aForward move forward in document. * @param aExtend continue selection */ NS_IMETHOD WordMove(PRBool aForward, PRBool aExtend)=0; /** LineMove will generally be called from the nsiselectioncontroller implementations. * the effect being the selection will move one line up or down. * @param aForward move forward in document. * @param aExtend continue selection */ NS_IMETHOD LineMove(PRBool aForward, PRBool aExtend)=0; /** IntraLineMove will generally be called from the nsiselectioncontroller implementations. * the effect being the selection will move to beginning or end of line * @param aForward move forward in document. * @param aExtend continue selection */ NS_IMETHOD IntraLineMove(PRBool aForward, PRBool aExtend)=0; /** Select All will generally be called from the nsiselectioncontroller implementations. * it will select the whole doc */ NS_IMETHOD SelectAll()=0; /** Sets/Gets The display selection enum. */ NS_IMETHOD SetDisplaySelection(PRInt16 aState)=0; NS_IMETHOD GetDisplaySelection(PRInt16 *aState)=0; /** Allow applications to specify how we should place the caret * when the user clicks over an existing selection. A aDelay * value of PR_TRUE means delay clearing the selection and * placing the caret until MouseUp, when the user clicks over * an existing selection. This is especially usefull when applications * want to support Drag & Drop of the current selection. A value * of PR_FALSE means place the caret immediately. If the application * never calls this method, the nsIFrameSelection implementation * assumes the default value is PR_TRUE. * @param aDelay PR_TRUE if we should delay caret placement. */ NS_IMETHOD SetDelayCaretOverExistingSelection(PRBool aDelay)=0; /** Get the current delay caret setting. If aDelay contains * a return value of PR_TRUE, the caret is placed on MouseUp * when clicking over an existing selection. If PR_FALSE, * the selection is cleared and caret is placed immediately * in all cases. * @param aDelay will contain the return value. */ NS_IMETHOD GetDelayCaretOverExistingSelection(PRBool *aDelay)=0; /** If we are delaying caret placement til MouseUp (see * Set/GetDelayCaretOverExistingSelection()), this method * can be used to store the data received during the MouseDown * so that we can place the caret during the MouseUp event. * @aMouseEvent the event received by the selection MouseDown * handling method. A NULL value can be use to tell this method * that any data is storing is no longer valid. */ NS_IMETHOD SetDelayedCaretData(nsMouseEvent *aMouseEvent)=0; /** Get the delayed MouseDown event data neccessary to place the * caret during MouseUp processing. * @aMouseEvent will contain a pointer to the event received * by the selection during MouseDown processing. It can be NULL * if the data is no longer valid. */ NS_IMETHOD GetDelayedCaretData(nsMouseEvent **aMouseEvent)=0; /** Get the content node that limits the selection * When searching up a nodes for parents, as in a text edit field * in an browser page, we must stop at this node else we reach into the * parent page, which is very bad! */ NS_IMETHOD GetLimiter(nsIContent **aLimiterContent)=0; }; #endif /* nsIFrameSelection_h___ */